diff options
Diffstat (limited to 'watch-library/hardware/include/instance/sercom3.h')
| -rw-r--r-- | watch-library/hardware/include/instance/sercom3.h | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/watch-library/hardware/include/instance/sercom3.h b/watch-library/hardware/include/instance/sercom3.h new file mode 100644 index 00000000..f7256e22 --- /dev/null +++ b/watch-library/hardware/include/instance/sercom3.h @@ -0,0 +1,142 @@ +/** + * \file + * + * \brief Instance description for SERCOM3 + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_SERCOM3_INSTANCE_ +#define _SAML22_SERCOM3_INSTANCE_ + +/* ========== Register definition for SERCOM3 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SERCOM3_I2CM_CTRLA (0x42001000) /**< \brief (SERCOM3) I2CM Control A */ +#define REG_SERCOM3_I2CM_CTRLB (0x42001004) /**< \brief (SERCOM3) I2CM Control B */ +#define REG_SERCOM3_I2CM_BAUD (0x4200100C) /**< \brief (SERCOM3) I2CM Baud Rate */ +#define REG_SERCOM3_I2CM_INTENCLR (0x42001014) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ +#define REG_SERCOM3_I2CM_INTENSET (0x42001016) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ +#define REG_SERCOM3_I2CM_INTFLAG (0x42001018) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CM_STATUS (0x4200101A) /**< \brief (SERCOM3) I2CM Status */ +#define REG_SERCOM3_I2CM_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) I2CM Synchronization Busy */ +#define REG_SERCOM3_I2CM_ADDR (0x42001024) /**< \brief (SERCOM3) I2CM Address */ +#define REG_SERCOM3_I2CM_DATA (0x42001028) /**< \brief (SERCOM3) I2CM Data */ +#define REG_SERCOM3_I2CM_DBGCTRL (0x42001030) /**< \brief (SERCOM3) I2CM Debug Control */ +#define REG_SERCOM3_I2CS_CTRLA (0x42001000) /**< \brief (SERCOM3) I2CS Control A */ +#define REG_SERCOM3_I2CS_CTRLB (0x42001004) /**< \brief (SERCOM3) I2CS Control B */ +#define REG_SERCOM3_I2CS_INTENCLR (0x42001014) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ +#define REG_SERCOM3_I2CS_INTENSET (0x42001016) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ +#define REG_SERCOM3_I2CS_INTFLAG (0x42001018) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CS_STATUS (0x4200101A) /**< \brief (SERCOM3) I2CS Status */ +#define REG_SERCOM3_I2CS_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) I2CS Synchronization Busy */ +#define REG_SERCOM3_I2CS_ADDR (0x42001024) /**< \brief (SERCOM3) I2CS Address */ +#define REG_SERCOM3_I2CS_DATA (0x42001028) /**< \brief (SERCOM3) I2CS Data */ +#define REG_SERCOM3_SPI_CTRLA (0x42001000) /**< \brief (SERCOM3) SPI Control A */ +#define REG_SERCOM3_SPI_CTRLB (0x42001004) /**< \brief (SERCOM3) SPI Control B */ +#define REG_SERCOM3_SPI_BAUD (0x4200100C) /**< \brief (SERCOM3) SPI Baud Rate */ +#define REG_SERCOM3_SPI_INTENCLR (0x42001014) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ +#define REG_SERCOM3_SPI_INTENSET (0x42001016) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ +#define REG_SERCOM3_SPI_INTFLAG (0x42001018) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM3_SPI_STATUS (0x4200101A) /**< \brief (SERCOM3) SPI Status */ +#define REG_SERCOM3_SPI_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) SPI Synchronization Busy */ +#define REG_SERCOM3_SPI_ADDR (0x42001024) /**< \brief (SERCOM3) SPI Address */ +#define REG_SERCOM3_SPI_DATA (0x42001028) /**< \brief (SERCOM3) SPI Data */ +#define REG_SERCOM3_SPI_DBGCTRL (0x42001030) /**< \brief (SERCOM3) SPI Debug Control */ +#define REG_SERCOM3_USART_CTRLA (0x42001000) /**< \brief (SERCOM3) USART Control A */ +#define REG_SERCOM3_USART_CTRLB (0x42001004) /**< \brief (SERCOM3) USART Control B */ +#define REG_SERCOM3_USART_CTRLC (0x42001008) /**< \brief (SERCOM3) USART Control C */ +#define REG_SERCOM3_USART_BAUD (0x4200100C) /**< \brief (SERCOM3) USART Baud Rate */ +#define REG_SERCOM3_USART_RXPL (0x4200100E) /**< \brief (SERCOM3) USART Receive Pulse Length */ +#define REG_SERCOM3_USART_INTENCLR (0x42001014) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ +#define REG_SERCOM3_USART_INTENSET (0x42001016) /**< \brief (SERCOM3) USART Interrupt Enable Set */ +#define REG_SERCOM3_USART_INTFLAG (0x42001018) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM3_USART_STATUS (0x4200101A) /**< \brief (SERCOM3) USART Status */ +#define REG_SERCOM3_USART_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) USART Synchronization Busy */ +#define REG_SERCOM3_USART_RXERRCNT (0x42001020) /**< \brief (SERCOM3) USART Receive Error Count */ +#define REG_SERCOM3_USART_DATA (0x42001028) /**< \brief (SERCOM3) USART Data */ +#define REG_SERCOM3_USART_DBGCTRL (0x42001030) /**< \brief (SERCOM3) USART Debug Control */ +#else +#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) I2CM Control A */ +#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) I2CM Control B */ +#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4200100CUL) /**< \brief (SERCOM3) I2CM Baud Rate */ +#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ +#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ +#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) I2CM Status */ +#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) I2CM Synchronization Busy */ +#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) I2CM Address */ +#define REG_SERCOM3_I2CM_DATA (*(RwReg8 *)0x42001028UL) /**< \brief (SERCOM3) I2CM Data */ +#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) I2CM Debug Control */ +#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) I2CS Control A */ +#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) I2CS Control B */ +#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ +#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ +#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) I2CS Status */ +#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) I2CS Synchronization Busy */ +#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) I2CS Address */ +#define REG_SERCOM3_I2CS_DATA (*(RwReg8 *)0x42001028UL) /**< \brief (SERCOM3) I2CS Data */ +#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) SPI Control A */ +#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) SPI Control B */ +#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4200100CUL) /**< \brief (SERCOM3) SPI Baud Rate */ +#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ +#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ +#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) SPI Status */ +#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) SPI Synchronization Busy */ +#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) SPI Address */ +#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x42001028UL) /**< \brief (SERCOM3) SPI Data */ +#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) SPI Debug Control */ +#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) USART Control A */ +#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) USART Control B */ +#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x42001008UL) /**< \brief (SERCOM3) USART Control C */ +#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4200100CUL) /**< \brief (SERCOM3) USART Baud Rate */ +#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4200100EUL) /**< \brief (SERCOM3) USART Receive Pulse Length */ +#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ +#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) USART Interrupt Enable Set */ +#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) USART Status */ +#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) USART Synchronization Busy */ +#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x42001020UL) /**< \brief (SERCOM3) USART Receive Error Count */ +#define REG_SERCOM3_USART_DATA (*(RwReg16*)0x42001028UL) /**< \brief (SERCOM3) USART Data */ +#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) USART Debug Control */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SERCOM3 peripheral ========== */ +#define SERCOM3_DMAC_ID_RX 8 // Index of DMA RX trigger +#define SERCOM3_DMAC_ID_TX 9 // Index of DMA TX trigger +#define SERCOM3_GCLK_ID_CORE 19 +#define SERCOM3_GCLK_ID_SLOW 15 +#define SERCOM3_INT_MSB 6 +#define SERCOM3_PMSB 3 +#define SERCOM3_SPI 1 // SPI mode implemented? +#define SERCOM3_TWIM 1 // TWI Master mode implemented? +#define SERCOM3_TWIS 1 // TWI Slave mode implemented? +#define SERCOM3_TWI_HSMODE 0 // TWI HighSpeed mode implemented? +#define SERCOM3_USART 1 // USART mode implemented? +#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented? +#define SERCOM3_USART_LIN_MASTER 0 // USART LIN Master mode implemented? +#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented? + +#endif /* _SAML22_SERCOM3_INSTANCE_ */ |