diff options
Diffstat (limited to 'watch-library/config/hpl_tcc_config.h')
| -rw-r--r-- | watch-library/config/hpl_tcc_config.h | 547 |
1 files changed, 0 insertions, 547 deletions
diff --git a/watch-library/config/hpl_tcc_config.h b/watch-library/config/hpl_tcc_config.h deleted file mode 100644 index a8d45f5d..00000000 --- a/watch-library/config/hpl_tcc_config.h +++ /dev/null @@ -1,547 +0,0 @@ -/* Auto-generated config file hpl_tcc_config.h */ -#ifndef HPL_TCC_CONFIG_H -#define HPL_TCC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include <peripheral_clk_config.h> -#ifndef CONF_TCC0_ENABLE -#define CONF_TCC0_ENABLE 1 -#endif - -#ifndef CONF_TCC0_PWM_ENABLE -#define CONF_TCC0_PWM_ENABLE 1 -#endif - -// <h> Basic settings -// <y> TCC0 Prescaler -// <TCC_CTRLA_PRESCALER_DIV1_Val"> No division -// <TCC_CTRLA_PRESCALER_DIV2_Val"> Divide by 2 -// <TCC_CTRLA_PRESCALER_DIV4_Val"> Divide by 4 -// <TCC_CTRLA_PRESCALER_DIV8_Val"> Divide by 8 -// <TCC_CTRLA_PRESCALER_DIV16_Val"> Divide by 16 -// <TCC_CTRLA_PRESCALER_DIV64_Val"> Divide by 64 -// <TCC_CTRLA_PRESCALER_DIV256_Val"> Divide by 256 -// <TCC_CTRLA_PRESCALER_DIV1024_Val"> Divide by 1024 -// <i> This defines the TCC0 prescaler value -// <id> tcc_prescaler -#ifndef CONF_TCC0_PRESCALER -#define CONF_TCC0_PRESCALER TCC_CTRLA_PRESCALER_DIV8_Val -#endif - -// <hidden> -//<o> TCC0 Period Value <0x000000-0xFFFFFF> -// <id> tcc_per -#ifndef CONF_TCC0_PER -#define CONF_TCC0_PER 0x2710 -#endif -// </hidden> - -// </h> - -// <h> PWM Waveform Output settings -// <o> TCC0 Waveform Period Value (uS) <0x00-0xFFFFFFFF> -// <i> The unit of this value is us. -// <id> tcc_arch_wave_per_val -#ifndef CONF_TCC0_WAVE_PER_VAL -#define CONF_TCC0_WAVE_PER_VAL 0x3e8 -#endif - -// <o> TCC0 Waveform Duty Value (0.1%) <0x00-0x03E8> -// <i> The unit of this value is 1/1000. -// <id> tcc_arch_wave_duty_val -#ifndef CONF_TCC0_WAVE_DUTY_VAL -#define CONF_TCC0_WAVE_DUTY_VAL 0x1f4 -#endif - -// <o> TCC0 Waveform Channel Select <0x00-0x03> -// <i> Index of the Compare Channel register, into which the Waveform Duty Value is written. -// <i> Give index of the Compare Channel register here in 0x00-0x03 range. -// <id> tcc_arch_sel_ch -#ifndef CONF_TCC0_SEL_CH -#define CONF_TCC0_SEL_CH 0x1 -#endif - -/* Caculate pwm ccx register value based on WAVE_PER_VAL and Waveform Duty Value */ -#if CONF_TCC0_PRESCALER < TCC_CTRLA_PRESCALER_DIV64_Val -#define CONF_TCC0_PER_REG \ - ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 1000000 / (1 << CONF_TCC0_PRESCALER) - 1)) -#define CONF_TCC0_CCX_REG ((uint32_t)(((double)(double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000)) - -#elif CONF_TCC0_PRESCALER == TCC_CTRLA_PRESCALER_DIV64_Val -#define CONF_TCC0_PER_REG ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 64000000 - 1)) -#define CONF_TCC0_CCX_REG ((uint32_t)(((double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000)) - -#elif CONF_TCC0_PRESCALER == TCC_CTRLA_PRESCALER_DIV256_Val -#define CONF_TCC0_PER_REG ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 256000000 - 1)) -#define CONF_TCC0_CCX_REG ((uint32_t)(((double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000)) - -#elif CONF_TCC0_PRESCALER == TCC_CTRLA_PRESCALER_DIV1024_Val -#define CONF_TCC0_PER_REG ((uint32_t)(((double)CONF_TCC0_WAVE_PER_VAL * CONF_GCLK_TCC0_FREQUENCY) / 1024000000 - 1)) -#define CONF_TCC0_CCX_REG ((uint32_t)(((double)CONF_TCC0_PER_REG * CONF_TCC0_WAVE_DUTY_VAL) / 1000)) -#endif -// </h> - -// <h> Advanced settings -/* Commented intentionally. Timer uses fixed value of the following bit(s)/bitfield(s) of CTRL A register. - * May be used by other abstractions based on TC. */ -//#define CONF_TCC0_RESOLUTION TCC_CTRLA_RESOLUTION_NONE_Val -// <q> Run in standby -// <i> Indicates whether the TCC0 will continue running in standby sleep mode or not -// <id> tcc_arch_runstdby -#ifndef CONF_TCC0_RUNSTDBY -#define CONF_TCC0_RUNSTDBY 0 -#endif - -// <y> TCC0 Prescaler and Counter Synchronization Selection -// <TCC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK -// <TCC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock -// <TCC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter -// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCCx clock or on the next prescaled GCLK_TCCx clock. -// <id> tcc_arch_prescsync -#ifndef CONF_TCC0_PRESCSYNC -#define CONF_TCC0_PRESCSYNC TCC_CTRLA_PRESCSYNC_GCLK_Val -#endif - -// <y> TCC0 Waveform Generation Selection -// <TCC_WAVE_WAVEGEN_NPWM_Val"> Single-slope PWM -// <TCC_WAVE_WAVEGEN_DSCRITICAL_Val"> Dual-slope, critical interrupt/event at ZERO (DSCRITICAL) -// <TCC_WAVE_WAVEGEN_DSBOTTOM_Val"> Dual-slope, interrupt/event at ZERO (DSBOTTOM) -// <TCC_WAVE_WAVEGEN_DSBOTH_Val"> Dual-slope, interrupt/event at Top and ZERO (DSBOTH) -// <TCC_WAVE_WAVEGEN_DSTOP_Val"> Dual-slope, interrupt/event at Top (DSTOP) -// <id> tcc_arch_wavegen -#ifndef CONF_TCC0_WAVEGEN -#define CONF_TCC0_WAVEGEN TCC_WAVE_WAVEGEN_NPWM_Val -#endif -// <q> TCC0 Auto Lock -// <i> Indicates whether the TCC0 Auto Lock is enabled or not -// <id> tcc_arch_alock -#ifndef CONF_TCC0_ALOCK -#define CONF_TCC0_ALOCK 0 -#endif - -// <q> TCC0 Capture Channel 0 Enable -// <i> Indicates whether the TCC0 Capture Channel 0 is enabled or not -// <id> tcc_arch_cpten0 -#ifndef CONF_TCC0_CPTEN0 -#define CONF_TCC0_CPTEN0 0 -#endif - -// <q> TCC0 Capture Channel 1 Enable -// <i> Indicates whether the TCC0 Capture Channel 1 is enabled or not -// <id> tcc_arch_cpten1 -#ifndef CONF_TCC0_CPTEN1 -#define CONF_TCC0_CPTEN1 0 -#endif - -// <q> TCC0 Capture Channel 2 Enable -// <i> Indicates whether the TCC0 Capture Channel 2 is enabled or not -// <id> tcc_arch_cpten2 -#ifndef CONF_TCC0_CPTEN2 -#define CONF_TCC0_CPTEN2 0 -#endif - -// <q> TCC0 Capture Channel 3 Enable -// <i> Indicates whether the TCC0 Capture Channel 3 is enabled or not -// <id> tcc_arch_cpten3 -#ifndef CONF_TCC0_CPTEN3 -#define CONF_TCC0_CPTEN3 0 -#endif - -// <hidden> -// <q> TCC0 Capture Channel 4 Enable -// <i> Indicates whether the TCC0 Capture Channel 4 is enabled or not -// <id> tcc_arch_cpten4 -#ifndef CONF_TCC0_CPTEN4 -#define CONF_TCC0_CPTEN4 0 -#endif -// </hidden> -// <hidden> -// <q> TCC0 Capture Channel 5 Enable -// <i> Indicates whether the TCC0 Capture Channel 5 is enabled or not -// <id> tcc_arch_cpten5 -#ifndef CONF_TCC0_CPTEN5 -#define CONF_TCC0_CPTEN5 0 -#endif -// </hidden> -// <hidden> -// <q> TCC0 Capture Channel 6 Enable -// <i> Indicates whether the TCC0 Capture Channel 6 is enabled or not -// <id> tcc_arch_cpten6 -#ifndef CONF_TCC0_CPTEN6 -#define CONF_TCC0_CPTEN6 0 -#endif -// </hidden> -// <hidden> -// <q> TCC0 Capture Channel 7 Enable -// <i> Indicates whether the TCC0 Capture Channel 7 is enabled or not -// <id> tcc_arch_cpten7 -#ifndef CONF_TCC0_CPTEN7 -#define CONF_TCC0_CPTEN7 0 -#endif -// </hidden> - -// <q> TCC0 Lock update -// <i> Indicates whether the TCC0 Lock update is enabled or not -// <id> tcc_arch_lupd -#ifndef CONF_TCC0_LUPD -#define CONF_TCC0_LUPD 1 -#endif - -/* Commented intentionally. Timer uses fixed value of the following bit(s)/bitfield(s) of CTRL B register. - * May be used by other abstractions based on TC. */ -//#define CONF_TCC0_DIR 0 -//#define CONF_TCC0_ONESHOT 0 - -/* Commented intentionally. No fault control for timers. */ -/*#define CONF_TCC0_FAULT_A_SRC TCC_FCTRLA_SRC_DISABLE_Val -#define CONF_TCC0_FAULT_A_KEEP 0 -#define CONF_TCC0_FAULT_A_QUAL 0 -#define CONF_TCC0_FAULT_A_BLANK TCC_FCTRLA_BLANK_DISABLE_Val -#define CONF_TCC0_FAULT_A_RESTART 0 -#define CONF_TCC0_FAULT_A_HALT TCC_FCTRLA_HALT_DISABLE_Val -#define CONF_TCC0_FAULT_A_CHSEL TCC_FCTRLA_CHSEL_CC0_Val -#define CONF_TCC0_FAULT_A_CAPTURE TCC_FCTRLA_CAPTURE_DISABLE_Val -#define CONF_TCC0_FAULT_A_BLACNKPRESC 0 -#define CONF_TCC0_FAULT_A_BLANKVAL 0 -#define CONF_TCC0_FAULT_A_FILTERVAL 0 - -#define CONF_TCC0_FAULT_B_SRC TCC_FCTRLB_SRC_DISABLE_Val -#define CONF_TCC0_FAULT_B_KEEP 0 -#define CONF_TCC0_FAULT_B_QUAL 0 -#define CONF_TCC0_FAULT_B_BLANK TCC_FCTRLB_BLANK_DISABLE_Val -#define CONF_TCC0_FAULT_B_RESTART 0 -#define CONF_TCC0_FAULT_B_HALT TCC_FCTRLB_HALT_DISABLE_Val -#define CONF_TCC0_FAULT_B_CHSEL TCC_FCTRLB_CHSEL_CC0_Val -#define CONF_TCC0_FAULT_B_CAPTURE TCC_FCTRLB_CAPTURE_DISABLE_Val -#define CONF_TCC0_FAULT_B_BLACNKPRESC 0 -#define CONF_TCC0_FAULT_B_BLANKVAL 0 -#define CONF_TCC0_FAULT_B_FILTERVAL 0*/ - -/* Commented intentionally. No dead-time control for timers. */ -/*#define CONF_TCC0_OTMX 0 -#define CONF_TCC0_DTIEN0 0 -#define CONF_TCC0_DTIEN1 0 -#define CONF_TCC0_DTIEN2 0 -#define CONF_TCC0_DTIEN3 0 -#define CONF_TCC0_DTHS 0*/ - -/* Commented intentionally. No driver control for timers. */ -/*#define CONF_TCC0_NRE0 0 -#define CONF_TCC0_NRE1 0 -#define CONF_TCC0_NRE2 0 -#define CONF_TCC0_NRE3 0 -#define CONF_TCC0_NRE4 0 -#define CONF_TCC0_NRE5 0 -#define CONF_TCC0_NRE6 0 -#define CONF_TCC0_NRE7 0 -#define CONF_TCC0_NVR0 0 -#define CONF_TCC0_NVR1 0 -#define CONF_TCC0_NVR2 0 -#define CONF_TCC0_NVR3 0 -#define CONF_TCC0_NVR4 0 -#define CONF_TCC0_NVR5 0 -#define CONF_TCC0_NVR6 0 -#define CONF_TCC0_NVR7 0 -#define CONF_TCC0_INVEN0 0 -#define CONF_TCC0_INVEN1 0 -#define CONF_TCC0_INVEN2 0 -#define CONF_TCC0_INVEN3 0 -#define CONF_TCC0_INVEN4 0 -#define CONF_TCC0_INVEN5 0 -#define CONF_TCC0_INVEN6 0 -#define CONF_TCC0_INVEN7 0 -#define CONF_TCC0_FILTERVAL0 0 -#define CONF_TCC0_FILTERVAL1 0*/ - -// <q> TCC0 Debug Running Mode -// <i> Indicates whether the TCC0 Debug Running Mode is enabled or not -// <id> tcc_arch_dbgrun -#ifndef CONF_TCC0_DBGRUN -#define CONF_TCC0_DBGRUN 0 -#endif - -/* Commented intentionally. Timer uses fixed value of the following bit(s)/bitfield(s) of Debug Control register. - * May be used by other abstractions based on TC. */ -//#define CONF_TCC0_FDDBD 0 - -// <e> Event control -// <id> timer_event_control -#ifndef CONF_TCC0_EVENT_CONTROL_ENABLE -#define CONF_TCC0_EVENT_CONTROL_ENABLE 0 -#endif - -// <q> Match or Capture Channel 0 Event Output -// <i> This bit indicates whether match/capture event on channel 0 is enabled and will be generated -// <id> tcc_arch_mceo0 -#ifndef CONF_TCC0_MCEO0 -#define CONF_TCC0_MCEO0 0 -#endif - -// <q> Match or Capture Channel 0 Event Input -// <i> This bit indicates whether match/capture 0 incoming event is enabled -// <id> tcc_arch_mcei0 -#ifndef CONF_TCC0_MCEI0 -#define CONF_TCC0_MCEI0 0 -#endif -// <q> Match or Capture Channel 1 Event Output -// <i> This bit indicates whether match/capture event on channel 1 is enabled and will be generated -// <id> tcc_arch_mceo1 -#ifndef CONF_TCC0_MCEO1 -#define CONF_TCC0_MCEO1 0 -#endif - -// <q> Match or Capture Channel 1 Event Input -// <i> This bit indicates whether match/capture 1 incoming event is enabled -// <id> tcc_arch_mcei1 -#ifndef CONF_TCC0_MCEI1 -#define CONF_TCC0_MCEI1 0 -#endif -// <q> Match or Capture Channel 2 Event Output -// <i> This bit indicates whether match/capture event on channel 2 is enabled and will be generated -// <id> tcc_arch_mceo2 -#ifndef CONF_TCC0_MCEO2 -#define CONF_TCC0_MCEO2 0 -#endif - -// <q> Match or Capture Channel 2 Event Input -// <i> This bit indicates whether match/capture 2 incoming event is enabled -// <id> tcc_arch_mcei2 -#ifndef CONF_TCC0_MCEI2 -#define CONF_TCC0_MCEI2 0 -#endif -// <q> Match or Capture Channel 3 Event Output -// <i> This bit indicates whether match/capture event on channel 3 is enabled and will be generated -// <id> tcc_arch_mceo3 -#ifndef CONF_TCC0_MCEO3 -#define CONF_TCC0_MCEO3 0 -#endif - -// <q> Match or Capture Channel 3 Event Input -// <i> This bit indicates whether match/capture 3 incoming event is enabled -// <id> tcc_arch_mcei3 -#ifndef CONF_TCC0_MCEI3 -#define CONF_TCC0_MCEI3 0 -#endif - -// <q> Timer/Counter Event Input 0 -// <i> This bit is used to enable input event 0 to the TCC -// <id> tcc_arch_tcei0 -#ifndef CONF_TCC0_TCEI0 -#define CONF_TCC0_TCEI0 0 -#endif - -// <q> Timer/Counter Event Input 0 Invert -// <i> This bit inverts the event 0 input -// <id> tcc_arch_tceinv0 -#ifndef CONF_TCC0_TCINV0 -#define CONF_TCC0_TCINV0 0 -#endif -// <q> Timer/Counter Event Input 1 -// <i> This bit is used to enable input event 1 to the TCC -// <id> tcc_arch_tcei1 -#ifndef CONF_TCC0_TCEI1 -#define CONF_TCC0_TCEI1 0 -#endif - -// <q> Timer/Counter Event Input 1 Invert -// <i> This bit inverts the event 1 input -// <id> tcc_arch_tceinv1 -#ifndef CONF_TCC0_TCINV1 -#define CONF_TCC0_TCINV1 0 -#endif - -// <q> Timer/Counter Event Output -// <i> This bit is used to enable the counter cycle event. -//<id> tcc_arch_cnteo -#ifndef CONF_TCC0_CNTEO -#define CONF_TCC0_CNTEO 0 -#endif - -// <q> Re-trigger Event Output -// <i> This bit is used to enable the counter re-trigger event. -//<id> tcc_arch_trgeo -#ifndef CONF_TCC0_TRGEO -#define CONF_TCC0_TRGEO 0 -#endif - -// <q> Overflow/Underflow Event Output -// <i> This bit is used to enable enable event on overflow/underflow. -//<id> tcc_arch_ovfeo -#ifndef CONF_TCC0_OVFEO -#define CONF_TCC0_OVFEO 0 -#endif - -// <o> Timer/Counter Interrupt and Event Output Selection -// <0=> An interrupt/event is generated when a new counter cycle starts -// <1=> An interrupt/event is generated when a counter cycle ends -// <2=> An interrupt/event is generated when a counter cycle ends, except for the first and last cycles -// <3=> An interrupt/event is generated when a new counter cycle starts or a counter cycle ends -// <i> These bits define on which part of the counter cycle the counter event output is generated -// <id> tcc_arch_cntsel -#ifndef CONF_TCC0_CNTSEL -#define CONF_TCC0_CNTSEL 0 -#endif - -// <o> Timer/Counter Event Input 0 Action -// <0=>Event action disabled -// <1=>Start restart or re-trigger on event -// <2=>Count on event -// <3=>Start on event -// <4=>Increment on event -// <5=>Count on active state of asynchronous event -// <6=>Capture overflow times (Max value) -// <7=>Non-recoverable fault -// <i> These bits define the action the TCC performs on TCE0 event input 0 -// <id> tcc_arch_evact0 -#ifndef CONF_TCC0_EVACT0 -#define CONF_TCC0_EVACT0 0 -#endif - -// <o> Timer/Counter Event Input 1 Action -// <0=>Event action disabled -// <1=>Re-trigger counter on event -// <2=>Direction control -// <3=>Stop counter on event -// <4=>Decrement counter on event -// <5=>Period capture value in CC0 register, pulse width capture value in CC1 register -// <6=>Period capture value in CC1 register, pulse width capture value in CC0 register -// <7=>Non-recoverable fault -// <i> These bits define the action the TCC performs on TCE0 event input 0 -// <id> tcc_arch_evact1 -#ifndef CONF_TCC0_EVACT1 -#define CONF_TCC0_EVACT1 0 -#endif -// </e> - -/* Commented intentionally. No pattern control for timers. */ -/*#define CONF_TCC0_PGE0 0 -#define CONF_TCC0_PGE1 0 -#define CONF_TCC0_PGE2 0 -#define CONF_TCC0_PGE3 0 -#define CONF_TCC0_PGE4 0 -#define CONF_TCC0_PGE5 0 -#define CONF_TCC0_PGE6 0 -#define CONF_TCC0_PGE7 0 -#define CONF_TCC0_PGV0 0 -#define CONF_TCC0_PGV1 0 -#define CONF_TCC0_PGV2 0 -#define CONF_TCC0_PGV3 0 -#define CONF_TCC0_PGV4 0 -#define CONF_TCC0_PGV5 0 -#define CONF_TCC0_PGV6 0 -#define CONF_TCC0_PGV7 0*/ - -/* Commented intentionally. No pattern waveform control for timers. */ -/*#define CONF_TCC0_WAVEGEN TCC_WAVE_WAVEGEN_MFRQ_Val -#define CONF_TCC0_RAMP TCC_WAVE_RAMP_RAMP1_Val -#define CONF_TCC0_CIPEREN 0 -#define CONF_TCC0_CICCEN0 0 -#define CONF_TCC0_CICCEN1 0 -#define CONF_TCC0_CICCEN2 0 -#define CONF_TCC0_CICCEN3 0 -#define CONF_TCC0_POL0 0 -#define CONF_TCC0_POL1 0 -#define CONF_TCC0_POL2 0 -#define CONF_TCC0_POL3 0 -#define CONF_TCC0_POL4 0 -#define CONF_TCC0_POL5 0 -#define CONF_TCC0_POL6 0 -#define CONF_TCC0_POL7 0 -#define CONF_TCC0_SWAP0 0 -#define CONF_TCC0_SWAP1 0 -#define CONF_TCC0_SWAP2 0 -#define CONF_TCC0_SWAP3 0*/ - -//<o> TCC0 Compare and Capture value 0 <0x00-0xFFFFFF> -// <id> tcc_arch_cc0 -#ifndef CONF_TCC0_CC0 -#define CONF_TCC0_CC0 0x0 -#endif - -//<o> TCC0 Compare and Capture value 1 <0x00-0xFFFFFF> -// <id> tcc_arch_cc1 -#ifndef CONF_TCC0_CC1 -#define CONF_TCC0_CC1 0x0 -#endif - -//<o> TCC0 Compare and Capture value 2 <0x00-0xFFFFFF> -// <id> tcc_arch_cc2 -#ifndef CONF_TCC0_CC2 -#define CONF_TCC0_CC2 0x0 -#endif - -//<o> TCC0 Compare and Capture value 3 <0x00-0xFFFFFF> -// <id> tcc_arch_cc3 -#ifndef CONF_TCC0_CC3 -#define CONF_TCC0_CC3 0x0 -#endif - -/* Commented intentionally. No pattern control for timers. */ -/*#define CONF_TCC0_PATTB_PGEB0 0 -#define CONF_TCC0_PATTB_PGEB1 0 -#define CONF_TCC0_PATTB_PGEB2 0 -#define CONF_TCC0_PATTB_PGEB3 0 -#define CONF_TCC0_PATTB_PGEB4 0 -#define CONF_TCC0_PATTB_PGEB5 0 -#define CONF_TCC0_PATTB_PGEB6 0 -#define CONF_TCC0_PATTB_PGEB7 0 -#define CONF_TCC0_PATTB_PGVB0 0 -#define CONF_TCC0_PATTB_PGVB1 0 -#define CONF_TCC0_PATTB_PGVB2 0 -#define CONF_TCC0_PATTB_PGVB3 0 -#define CONF_TCC0_PATTB_PGVB4 0 -#define CONF_TCC0_PATTB_PGVB5 0 -#define CONF_TCC0_PATTB_PGVB6 0 -#define CONF_TCC0_PATTB_PGVB7 0*/ - -/* Commented intentionally. No waveform control for timers. */ -/*#define CONF_TCC0_WAVEGENB TCC_WAVEB_WAVEGENB_MFRQ_Val -#define CONF_TCC0_RAMPB TCC_WAVE_RAMP_RAMP1_Val -#define CONF_TCC0_CIPERENB 0 -#define CONF_TCC0_CICCEN0B 0 -#define CONF_TCC0_CICCEN1B 0 -#define CONF_TCC0_CICCEN2B 0 -#define CONF_TCC0_CICCEN3B 0 -#define CONF_TCC0_POL0B 0 -#define CONF_TCC0_POL1B 0 -#define CONF_TCC0_POL2B 0 -#define CONF_TCC0_POL3B 0 -#define CONF_TCC0_POL4B 0 -#define CONF_TCC0_POL5B 0 -#define CONF_TCC0_POL6B 0 -#define CONF_TCC0_POL7B 0 -#define CONF_TCC0_SWAP0B 0 -#define CONF_TCC0_SWAP1B 0 -#define CONF_TCC0_SWAP2B 0 -#define CONF_TCC0_SWAP3B 0*/ - -/* Commented intentionally. No buffering for timers. */ -/*#define CONF_TCC0_PERB 0 -#define CONF_TCC0_CCB0 0 -#define CONF_TCC0_CCB1 0 -#define CONF_TCC0_CCB2 0 -#define CONF_TCC0_CCB3 0*/ -// </h> - -#define CONF_TCC0_CTRLA \ - TCC_CTRLA_PRESCALER(CONF_TCC0_PRESCALER) | (CONF_TCC0_RUNSTDBY << TCC_CTRLA_RUNSTDBY_Pos) \ - | TCC_CTRLA_PRESCSYNC(CONF_TCC0_PRESCSYNC) | (CONF_TCC0_CPTEN0 << TCC_CTRLA_CPTEN0_Pos) \ - | (CONF_TCC0_CPTEN1 << TCC_CTRLA_CPTEN1_Pos) | (CONF_TCC0_CPTEN2 << TCC_CTRLA_CPTEN2_Pos) \ - | (CONF_TCC0_CPTEN3 << TCC_CTRLA_CPTEN3_Pos) | (CONF_TCC0_ALOCK << TCC_CTRLA_ALOCK_Pos) -#define CONF_TCC0_CTRLB (CONF_TCC0_LUPD << TCC_CTRLBSET_LUPD_Pos) -#define CONF_TCC0_DBGCTRL (CONF_TCC0_DBGRUN << TCC_DBGCTRL_DBGRUN_Pos) -#define CONF_TCC0_EVCTRL \ - TCC_EVCTRL_CNTSEL(CONF_TCC0_CNTSEL) | (CONF_TCC0_OVFEO << TCC_EVCTRL_OVFEO_Pos) \ - | (CONF_TCC0_TRGEO << TCC_EVCTRL_TRGEO_Pos) | (CONF_TCC0_CNTEO << TCC_EVCTRL_CNTEO_Pos) \ - | (CONF_TCC0_MCEO0 << TCC_EVCTRL_MCEO0_Pos) | (CONF_TCC0_MCEI0 << TCC_EVCTRL_MCEI0_Pos) \ - | (CONF_TCC0_MCEO1 << TCC_EVCTRL_MCEO1_Pos) | (CONF_TCC0_MCEI1 << TCC_EVCTRL_MCEI1_Pos) \ - | (CONF_TCC0_MCEO2 << TCC_EVCTRL_MCEO2_Pos) | (CONF_TCC0_MCEI2 << TCC_EVCTRL_MCEI2_Pos) \ - | (CONF_TCC0_MCEO3 << TCC_EVCTRL_MCEO3_Pos) | (CONF_TCC0_MCEI3 << TCC_EVCTRL_MCEI3_Pos) \ - | (CONF_TCC0_TCEI0 << TCC_EVCTRL_TCEI0_Pos) | (CONF_TCC0_TCEI1 << TCC_EVCTRL_TCEI1_Pos) \ - | (CONF_TCC0_TCINV0 << TCC_EVCTRL_TCINV0_Pos) | (CONF_TCC0_TCINV1 << TCC_EVCTRL_TCINV1_Pos) \ - | TCC_EVCTRL_EVACT1(CONF_TCC0_EVACT1) | TCC_EVCTRL_EVACT0(CONF_TCC0_EVACT0) - -// <<< end of configuration section >>> - -#endif // HPL_TCC_CONFIG_H |