diff options
Diffstat (limited to 'tinyusb/hw/bsp')
414 files changed, 54934 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/ansi_escape.h b/tinyusb/hw/bsp/ansi_escape.h new file mode 100755 index 00000000..35342cfe --- /dev/null +++ b/tinyusb/hw/bsp/ansi_escape.h @@ -0,0 +1,97 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/** \ingroup group_board + * \defgroup group_ansi_esc ANSI Esacpe Code + * @{ */ + +#ifndef _TUSB_ANSI_ESC_CODE_H_ +#define _TUSB_ANSI_ESC_CODE_H_ + + +#ifdef __cplusplus + extern "C" { +#endif + +#define CSI_CODE(seq) "\33[" seq +#define CSI_SGR(x) CSI_CODE(#x) "m" + +//------------- Cursor movement -------------// +/** \defgroup group_ansi_cursor Cursor Movement + * @{ */ +#define ANSI_CURSOR_UP(n) CSI_CODE(#n "A") ///< Move cursor up +#define ANSI_CURSOR_DOWN(n) CSI_CODE(#n "B") ///< Move cursor down +#define ANSI_CURSOR_FORWARD(n) CSI_CODE(#n "C") ///< Move cursor forward +#define ANSI_CURSOR_BACKWARD(n) CSI_CODE(#n "D") ///< Move cursor backward +#define ANSI_CURSOR_LINE_DOWN(n) CSI_CODE(#n "E") ///< Move cursor to the beginning of the line (n) down +#define ANSI_CURSOR_LINE_UP(n) CSI_CODE(#n "F") ///< Move cursor to the beginning of the line (n) up +#define ANSI_CURSOR_POSITION(n, m) CSI_CODE(#n ";" #m "H") ///< Move cursor to position (n, m) +/** @} */ + +//------------- Screen -------------// +/** \defgroup group_ansi_screen Screen Control + * @{ */ +#define ANSI_ERASE_SCREEN(n) CSI_CODE(#n "J") ///< Erase the screen +#define ANSI_ERASE_LINE(n) CSI_CODE(#n "K") ///< Erase the line (n) +#define ANSI_SCROLL_UP(n) CSI_CODE(#n "S") ///< Scroll the whole page up (n) lines +#define ANSI_SCROLL_DOWN(n) CSI_CODE(#n "T") ///< Scroll the whole page down (n) lines +/** @} */ + +//------------- Text Color -------------// +/** \defgroup group_ansi_text Text Color + * @{ */ +#define ANSI_TEXT_BLACK CSI_SGR(30) +#define ANSI_TEXT_RED CSI_SGR(31) +#define ANSI_TEXT_GREEN CSI_SGR(32) +#define ANSI_TEXT_YELLOW CSI_SGR(33) +#define ANSI_TEXT_BLUE CSI_SGR(34) +#define ANSI_TEXT_MAGENTA CSI_SGR(35) +#define ANSI_TEXT_CYAN CSI_SGR(36) +#define ANSI_TEXT_WHITE CSI_SGR(37) +#define ANSI_TEXT_DEFAULT CSI_SGR(39) +/** @} */ + +//------------- Background Color -------------// +/** \defgroup group_ansi_background Background Color + * @{ */ +#define ANSI_BG_BLACK CSI_SGR(40) +#define ANSI_BG_RED CSI_SGR(41) +#define ANSI_BG_GREEN CSI_SGR(42) +#define ANSI_BG_YELLOW CSI_SGR(43) +#define ANSI_BG_BLUE CSI_SGR(44) +#define ANSI_BG_MAGENTA CSI_SGR(45) +#define ANSI_BG_CYAN CSI_SGR(46) +#define ANSI_BG_WHITE CSI_SGR(47) +#define ANSI_BG_DEFAULT CSI_SGR(49) +/** @} */ + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_ANSI_ESC_CODE_H_ */ + +/** @} */ diff --git a/tinyusb/hw/bsp/board.c b/tinyusb/hw/bsp/board.c new file mode 100755 index 00000000..6a26f55b --- /dev/null +++ b/tinyusb/hw/bsp/board.c @@ -0,0 +1,147 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "board.h" + +#if 0 +#define LED_PHASE_MAX 8 + +static struct +{ + uint32_t phase[LED_PHASE_MAX]; + uint8_t phase_count; + + bool led_state; + uint8_t current_phase; + uint32_t current_ms; +}led_pattern; + +void board_led_pattern(uint32_t const phase_ms[], uint8_t count) +{ + memcpy(led_pattern.phase, phase_ms, 4*count); + led_pattern.phase_count = count; + + // reset with 1st phase is on + led_pattern.current_ms = board_millis(); + led_pattern.current_phase = 0; + led_pattern.led_state = true; + board_led_on(); +} + +void board_led_task(void) +{ + if ( led_pattern.phase_count == 0 ) return; + + uint32_t const duration = led_pattern.phase[led_pattern.current_phase]; + + // return if not enough time + if (board_millis() - led_pattern.current_ms < duration) return; + + led_pattern.led_state = !led_pattern.led_state; + board_led_write(led_pattern.led_state); + + led_pattern.current_ms += duration; + led_pattern.current_phase++; + + if (led_pattern.current_phase == led_pattern.phase_count) + { + led_pattern.current_phase = 0; + led_pattern.led_state = true; + board_led_on(); + } +} +#endif + +//--------------------------------------------------------------------+ +// newlib read()/write() retarget +//--------------------------------------------------------------------+ + +#if defined(__MSP430__) || defined(__RX__) + #define sys_write write + #define sys_read read +#else + #define sys_write _write + #define sys_read _read +#endif + +#if defined(LOGGER_RTT) +// Logging with RTT + +// If using SES IDE, use the Syscalls/SEGGER_RTT_Syscalls_SES.c instead +#if !(defined __SES_ARM) && !(defined __SES_RISCV) && !(defined __CROSSWORKS_ARM) +#include "SEGGER_RTT.h" + +TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) +{ + (void) fhdl; + SEGGER_RTT_Write(0, (char*) buf, (int) count); + return count; +} + +TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) +{ + (void) fhdl; + return SEGGER_RTT_Read(0, buf, count); +} +#endif + +#elif defined(LOGGER_SWO) +// Logging with SWO for ARM Cortex + +#include "board_mcu.h" + +TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) +{ + (void) fhdl; + uint8_t const* buf8 = (uint8_t const*) buf; + for(size_t i=0; i<count; i++) + { + ITM_SendChar(buf8[i]); + } + return count; +} + +TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) +{ + (void) fhdl; + return 0; +} + +#else + +// Default logging with on-board UART +TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) +{ + (void) fhdl; + return board_uart_write(buf, count); +} + +TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) +{ + (void) fhdl; + return board_uart_read((uint8_t*) buf, count); +} + +#endif diff --git a/tinyusb/hw/bsp/board.h b/tinyusb/hw/bsp/board.h new file mode 100755 index 00000000..782e0939 --- /dev/null +++ b/tinyusb/hw/bsp/board.h @@ -0,0 +1,147 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/** \ingroup group_demo + * \defgroup group_board Boards Abstraction Layer + * @{ */ + +#ifndef _BSP_BOARD_H_ +#define _BSP_BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#include <stdint.h> +#include <stdbool.h> + +#include "ansi_escape.h" +#include "tusb.h" + +#define CFG_BOARD_UART_BAUDRATE 115200 + +//--------------------------------------------------------------------+ +// Board Porting API +// For simplicity, only one LED and one Button are used +//--------------------------------------------------------------------+ + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void); + +// Turn LED on or off +void board_led_write(bool state); + +// Control led pattern using phase duration in ms. +// For each phase, LED is toggle then repeated, board_led_task() is required to be called +//void board_led_pattern(uint32_t const phase_ms[], uint8_t count); + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void); + +// Get characters from UART +int board_uart_read(uint8_t* buf, int len); + +// Send characters to UART +int board_uart_write(void const * buf, int len); + +#if CFG_TUSB_OS == OPT_OS_NONE + // Get current milliseconds, must be implemented when no RTOS is used + uint32_t board_millis(void); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + static inline uint32_t board_millis(void) + { + return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); + } + +#elif CFG_TUSB_OS == OPT_OS_MYNEWT + static inline uint32_t board_millis(void) + { + return os_time_ticks_to_ms32( os_time_get() ); + } + +#elif CFG_TUSB_OS == OPT_OS_PICO + #include "pico/time.h" + static inline uint32_t board_millis(void) + { + return to_ms_since_boot(get_absolute_time()); + } + +#elif CFG_TUSB_OS == OPT_OS_RTTHREAD + static inline uint32_t board_millis(void) + { + return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); + } + +#else + #error "board_millis() is not implemented for this OS" +#endif + +//--------------------------------------------------------------------+ +// Helper functions +//--------------------------------------------------------------------+ +static inline void board_led_on(void) +{ + board_led_write(true); +} + +static inline void board_led_off(void) +{ + board_led_write(false); +} + +// TODO remove +static inline void board_delay(uint32_t ms) +{ + uint32_t start_ms = board_millis(); + while (board_millis() - start_ms < ms) + { + #if TUSB_OPT_DEVICE_ENABLED + // take chance to run usb background + tud_task(); + #endif + } +} + +static inline int board_uart_getchar(void) +{ + uint8_t c; + return board_uart_read(&c, 1) ? (int) c : (-1); +} + +static inline int board_uart_putchar(uint8_t c) +{ + return board_uart_write(&c, 1); +} + +#ifdef __cplusplus + } +#endif + +#endif /* _BSP_BOARD_H_ */ + +/** @} */ diff --git a/tinyusb/hw/bsp/board_mcu.h b/tinyusb/hw/bsp/board_mcu.h new file mode 100755 index 00000000..8cc50c80 --- /dev/null +++ b/tinyusb/hw/bsp/board_mcu.h @@ -0,0 +1,142 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_MCU_H_ +#define BOARD_MCU_H_ + +#include "tusb_option.h" + +//--------------------------------------------------------------------+ +// Low Level MCU header include. TinyUSB stack and example should be +// platform independent and mostly doens't need to include this file. +// However there are still certain situation where this file is needed: +// - FreeRTOSConfig.h to set up correct clock and NVIC interrupts for ARM Cortex +// - SWO logging for Cortex M with ITM_SendChar() / ITM_ReceiveChar() +//--------------------------------------------------------------------+ + +// Include order follows OPT_MCU_ number +#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX || \ + CFG_TUSB_MCU == OPT_MCU_LPC15XX || CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || \ + CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ + CFG_TUSB_MCU == OPT_MCU_LPC40XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX + #include "chip.h" + +#elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \ + CFG_TUSB_MCU == OPT_MCU_LPC55XX || CFG_TUSB_MCU == OPT_MCU_MKL25ZXX || \ + CFG_TUSB_MCU == OPT_MCU_K32L2BXX + #include "fsl_device_registers.h" + +#elif CFG_TUSB_MCU == OPT_MCU_NRF5X + #include "nrf.h" + +#elif CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \ + CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \ + CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21 + #include "sam.h" + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG + #undef LITTLE_ENDIAN // hack to suppress "LITTLE_ENDIAN" redefined + #include "sam.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F0 + #include "stm32f0xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 + #include "stm32f1xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F2 + #include "stm32f2xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F3 + #include "stm32f3xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F4 + #include "stm32f4xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F7 + #include "stm32f7xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32H7 + #include "stm32h7xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L0 + #include "stm32l0xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 + #include "stm32l1xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 + #include "stm32l4xx.h" + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // no header needed + +#elif CFG_TUSB_MCU == OPT_MCU_MSP430x5xx + #include "msp430.h" + +#elif CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI + // no header needed + +#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX + #include "fsl_device_registers.h" + +#elif CFG_TUSB_MCU == OPT_MCU_NUC120 + #include "NUC100Series.h" + +#elif CFG_TUSB_MCU == OPT_MCU_NUC121 || CFG_TUSB_MCU == OPT_MCU_NUC126 + #include "NuMicro.h" + +#elif CFG_TUSB_MCU == OPT_MCU_NUC505 + #include "NUC505Series.h" + +#elif CFG_TUSB_MCU == OPT_MCU_ESP32S2 + // no header needed + +#elif CFG_TUSB_MCU == OPT_MCU_ESP32S3 + // no header needed + +#elif CFG_TUSB_MCU == OPT_MCU_DA1469X + #include "DA1469xAB.h" + +#elif CFG_TUSB_MCU == OPT_MCU_RP2040 + #include "pico.h" + +#elif CFG_TUSB_MCU == OPT_MCU_EFM32GG || CFG_TUSB_MCU == OPT_MCU_EFM32GG11 || CFG_TUSB_MCU == OPT_MCU_EFM32GG12 + #include "em_device.h" + +#elif CFG_TUSB_MCU == OPT_MCU_RX63X || CFG_TUSB_MCU == OPT_MCU_RX65X + // no header needed + +#elif CFG_TUSB_MCU == OPT_MCU_GD32VF103 + #include "gd32vf103.h" + +#else + #error "Missing MCU header" +#endif + + +#endif /* BOARD_MCU_H_ */ diff --git a/tinyusb/hw/bsp/d5035_01/board.mk b/tinyusb/hw/bsp/d5035_01/board.mk new file mode 100755 index 00000000..1d09bd3d --- /dev/null +++ b/tinyusb/hw/bsp/d5035_01/board.mk @@ -0,0 +1,58 @@ +DEPS_SUBMODULES += hw/mcu/microchip +HWREV ?= 1 + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mlong-calls \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__SAME51J19A__ \ + -DCONF_CPU_FREQUENCY=80000000 \ + -DCONF_GCLK_USB_FREQUENCY=48000000 \ + -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ + -DD5035_01=1 \ + -DBOARD_NAME="\"D5035-01\"" \ + -DSVC_Handler=SVCall_Handler \ + -DHWREV=$(HWREV) + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/same51j19a_flash.ld + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + hw/mcu/microchip/same51/gcc/gcc/startup_same51.c \ + hw/mcu/microchip/same51/gcc/system_same51.c + +ifdef SYSCALLS +ifneq ($(SYSCALLS),0) + SRC_C += hw/mcu/microchip/same51/hal/utils/src/utils_syscalls.c +endif +endif + +ifdef LOG +ifneq ($(LOG),0) + SRC_C += hw/mcu/microchip/same51/hal/utils/src/utils_syscalls.c +endif +endif + +INC += \ + $(TOP)/hw/mcu/microchip/same51/ \ + $(TOP)/hw/mcu/microchip/same51/config \ + $(TOP)/hw/mcu/microchip/same51/include \ + $(TOP)/hw/mcu/microchip/same51/hal/include \ + $(TOP)/hw/mcu/microchip/same51/hal/utils/include \ + $(TOP)/hw/mcu/microchip/same51/hpl/port \ + $(TOP)/hw/mcu/microchip/same51/hri \ + $(TOP)/hw/mcu/microchip/same51/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = ATSAME51J19 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/d5035_01/d5035_01.c b/tinyusb/hw/bsp/d5035_01/d5035_01.c new file mode 100755 index 00000000..5685ff16 --- /dev/null +++ b/tinyusb/hw/bsp/d5035_01/d5035_01.c @@ -0,0 +1,353 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jean Gressmann <jean@0x42.de> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <sam.h> +#include "bsp/board.h" + +#include <hal/include/hal_gpio.h> + +#if CONF_CPU_FREQUENCY != 80000000 +# error "CONF_CPU_FREQUENCY" must 80000000 +#endif + +#if CONF_GCLK_USB_FREQUENCY != 48000000 +# error "CONF_GCLK_USB_FREQUENCY" must 48000000 +#endif + +#if !defined(HWREV) +# error Define "HWREV" +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_0_Handler (void) +{ + tud_int_handler(0); +} + +void USB_1_Handler (void) +{ + tud_int_handler(0); +} + +void USB_2_Handler (void) +{ + tud_int_handler(0); +} + +void USB_3_Handler (void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define LED_PIN PIN_PA02 + +#if HWREV < 3 +# define BOARD_SERCOM SERCOM5 +#else +# define BOARD_SERCOM SERCOM0 +#endif + +static inline void init_clock(void) +{ + /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */ +#if HWREV == 1 + /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */ + OSCCTRL->XOSCCTRL[1].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | + OSCCTRL_XOSCCTRL_IPTAT(3) | + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ +#else // HWREV >= 1 + /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */ + OSCCTRL->XOSCCTRL[0].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | + OSCCTRL_XOSCCTRL_IPTAT(3) | + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY0); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ +#endif // HWREV + + /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ + GCLK->GENCTRL[0].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | /* DPLL0 */ + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ + GCLK->GENCTRL[1].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL1 | + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */ + GCLK->GENCTRL[2].reg = + GCLK_GENCTRL_DIV(1) | /* 80MHz */ + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ +} + +static inline void uart_init(void) +{ +#if HWREV < 3 + /* configure SERCOM5 on PB02 */ + PORT->Group[1].WRCONFIG.reg = + PORT_WRCONFIG_WRPINCFG | + PORT_WRCONFIG_WRPMUX | + PORT_WRCONFIG_PMUX(3) | /* function D */ + PORT_WRCONFIG_DRVSTR | + PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */ + PORT_WRCONFIG_PMUXEN; + + MCLK->APBDMASK.bit.SERCOM5_ = 1; + GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ + + SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ + while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); + + SERCOM5->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ +// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ + SERCOM5->USART.CTRLC.reg = 0x00; + // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E + SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); + +// SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; + SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#else +/* configure SERCOM0 on PA08 */ + PORT->Group[0].WRCONFIG.reg = + PORT_WRCONFIG_WRPINCFG | + PORT_WRCONFIG_WRPMUX | + PORT_WRCONFIG_PMUX(2) | /* function C */ + PORT_WRCONFIG_DRVSTR | + PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */ + PORT_WRCONFIG_PMUXEN; + + MCLK->APBAMASK.bit.SERCOM0_ = 1; + GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ + + SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); + + SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ +// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ + SERCOM0->USART.CTRLC.reg = 0x00; + // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E + SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); + +// SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; + SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#endif +} + +static inline void uart_send_buffer(uint8_t const *text, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM->USART.DATA.reg = text[i]; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) +{ + while (*text) { + BOARD_SERCOM->USART.DATA.reg = *text++; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); + } +} + + +void board_init(void) +{ + init_clock(); + + SystemCoreClock = CONF_CPU_FREQUENCY; + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + uart_init(); +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " UART initialized\n"); + tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); +#endif + + // Led init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(LED_PIN, 0); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " LED pin configured\n"); +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + +#if TUSB_OPT_DEVICE_ENABLED +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device enabled\n"); +#endif + + /* USB clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB pin init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); + + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device configured\n"); +#endif +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // this board has no button + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + if (len < 0) { + uart_send_str(buf); + } else { + uart_send_buffer(buf, len); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/d5035_01/same51j19a_flash.ld b/tinyusb/hw/bsp/d5035_01/same51j19a_flash.ld new file mode 100755 index 00000000..328d1c72 --- /dev/null +++ b/tinyusb/hw/bsp/d5035_01/same51j19a_flash.ld @@ -0,0 +1,163 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME51J19A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x1000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/da14695_dk_usb/board.mk b/tinyusb/hw/bsp/da14695_dk_usb/board.mk new file mode 100755 index 00000000..e969c79c --- /dev/null +++ b/tinyusb/hw/bsp/da14695_dk_usb/board.mk @@ -0,0 +1,55 @@ +CFLAGS += \ + -flto \ + -mthumb \ + -mthumb-interwork \ + -mabi=aapcs \ + -mcpu=cortex-m33+nodsp \ + -mfloat-abi=hard \ + -mfpu=fpv5-sp-d16 \ + -nostdlib \ + -DCORE_M33 \ + -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ + -DCFG_TUD_ENDPOINT0_SIZE=8\ + +MCU_FAMILY_DIR = hw/mcu/dialog/da1469x + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/da1469x.ld + +# While this is for da1469x chip, there is chance that da1468x chip family will also work +SRC_C += \ + src/portable/dialog/da146xx/dcd_da146xx.c \ + $(MCU_FAMILY_DIR)/src/system_da1469x.c \ + $(MCU_FAMILY_DIR)/src/da1469x_clock.c \ + $(MCU_FAMILY_DIR)/src/hal_gpio.c \ + +SRC_S += hw/bsp/$(BOARD)/gcc_startup_da1469x.S + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_FAMILY_DIR)/include \ + $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM33_NTZ/non_secure + +# For flash-jlink target +JLINK_DEVICE = DA14695 + +# flash using jlink but with some twists +flash: flash-dialog + +flash-dialog: $(BUILD)/$(PROJECT).bin + @echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h + @echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h + mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img + cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin + cat $^.img >> $(BUILD)/$(BOARD)-image.bin + @echo r > $(BUILD)/$(BOARD).jlink + @echo halt >> $(BUILD)/$(BOARD).jlink + @echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink + @echo r >> $(BUILD)/$(BOARD).jlink + @echo go >> $(BUILD)/$(BOARD).jlink + @echo exit >> $(BUILD)/$(BOARD).jlink + $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink + diff --git a/tinyusb/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/tinyusb/hw/bsp/da14695_dk_usb/da14695_dk_usb.c new file mode 100755 index 00000000..e7c7ae36 --- /dev/null +++ b/tinyusb/hw/bsp/da14695_dk_usb/da14695_dk_usb.c @@ -0,0 +1,127 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include <hal/hal_gpio.h> +#include <mcu/mcu.h> + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PIN 33 // P1.1 +#define LED_STATE_ON 1 +#define LED_STATE_OFF (1-LED_STATE_ON) + +#define BUTTON_PIN 6 + +void UnhandledIRQ(void) +{ + CRG_TOP->SYS_CTRL_REG = 0x80; + __BKPT(1); + while(1); +} + +void board_init(void) +{ + // LED + hal_gpio_init_out(LED_PIN, LED_STATE_ON); + + hal_gpio_init_out(1, 0); + hal_gpio_init_out(2, 0); + hal_gpio_init_out(3, 0); + hal_gpio_init_out(4, 0); + hal_gpio_init_out(5, 0); + + // Button + hal_gpio_init_in(BUTTON_PIN, HAL_GPIO_PULL_NONE); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + + NVIC_SetPriority(USB_IRQn, 2); + + /* Setup USB IRQ */ + NVIC_SetPriority(USB_IRQn, 2); + NVIC_EnableIRQ(USB_IRQn); + + /* Use PLL96 / 2 clock not HCLK */ + CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_USB_CLK_SRC_Msk; + + mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); + mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + hal_gpio_write(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF); +} + +uint32_t board_button_read(void) +{ + // button is active LOW + return hal_gpio_read(BUTTON_PIN) ^ 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void)buf; + (void)len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void)buf; + (void)len; + + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/da14695_dk_usb/da1469x.ld b/tinyusb/hw/bsp/da14695_dk_usb/da1469x.ld new file mode 100755 index 00000000..96507d6e --- /dev/null +++ b/tinyusb/hw/bsp/da14695_dk_usb/da1469x.ld @@ -0,0 +1,245 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + +MEMORY +{ + /* + * Flash is remapped at 0x0 by 1st stage bootloader, but this is done with + * an offset derived from image header thus it is safer to use remapped + * address space at 0x0 instead of QSPI_M address space at 0x16000000. + * Bootloader partition is 32K, but 9K is currently reserved for product + * header (8K) and image header (1K). + * First 512 bytes of SYSRAM are remapped at 0x0 and used as ISR vector + * (there's no need to reallocate ISR vector) and thus cannot be used by + * application. + */ + + FLASH (r) : ORIGIN = (0x00000000), LENGTH = (1024 * 1024) + RAM (rw) : ORIGIN = (0x20000000), LENGTH = (512 * 1024) +} + +OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapBase + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __bssnz_start__ + * __bssnz_end__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + __text = .; + + .text : + { + __isr_vector_start = .; + KEEP(*(.isr_vector)) + /* ISR vector shall have exactly 512 bytes */ + . = __isr_vector_start + 0x200; + __isr_vector_end = .; + + *(.text) + *(.text.*) + + *(.libcmac.rom) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + *(.eh_frame*) + . = ALIGN(4); + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } > FLASH + + __exidx_start = .; + .ARM : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + . = ALIGN(4); + } > FLASH + __exidx_end = .; + + .intvect : + { + . = ALIGN(4); + __intvect_start__ = .; + . = . + (__isr_vector_end - __isr_vector_start); + . = ALIGN(4); + } > RAM + + .sleep_state (NOLOAD) : + { + . = ALIGN(4); + *(sleep_state) + } > RAM + + /* This section will be zeroed by RTT package init */ + .rtt (NOLOAD): + { + . = ALIGN(4); + *(.rtt) + . = ALIGN(4); + } > RAM + + __text_ram_addr = LOADADDR(.text_ram); + + .text_ram : + { + . = ALIGN(4); + __text_ram_start__ = .; + *(.text_ram*) + . = ALIGN(4); + __text_ram_end__ = .; + } > RAM AT > FLASH + + __etext = LOADADDR(.data); + + .data : + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + *(.preinit_array) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + *(SORT(.init_array.*)) + *(.init_array) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + *(SORT(.fini_array.*)) + *(.fini_array) + PROVIDE_HIDDEN (__fini_array_end = .); + + *(.jcr) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + } > RAM AT > FLASH + + .bssnz : + { + . = ALIGN(4); + __bssnz_start__ = .; + *(.bss.core.nz*) + . = ALIGN(4); + __bssnz_end__ = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .cmac (NOLOAD) : + { + . = ALIGN(0x400); + *(.libcmac.ram) + } > RAM + + /* Heap starts after BSS */ + . = ALIGN(8); + __HeapBase = .; + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + _ram_start = ORIGIN(RAM); + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Top of head is the bottom of the stack */ + __HeapLimit = __StackLimit; + end = __HeapLimit; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack") + + /* Check that intvect is at the beginning of RAM */ + ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") +} + diff --git a/tinyusb/hw/bsp/da14695_dk_usb/gcc_startup_da1469x.S b/tinyusb/hw/bsp/da14695_dk_usb/gcc_startup_da1469x.S new file mode 100755 index 00000000..d47fbcd9 --- /dev/null +++ b/tinyusb/hw/bsp/da14695_dk_usb/gcc_startup_da1469x.S @@ -0,0 +1,301 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + + #include "syscfg/syscfg.h" + + .syntax unified + .arch armv7-m + + .section .stack + .align 3 +#ifdef __STACK_SIZE + .equ Stack_Size, __STACK_SIZE +#else + .equ Stack_Size, 0xC00 +#endif + .equ SYS_CTRL_REG, 0x50000024 + .equ CACHE_FLASH_REG, 0x100C0040 + .equ RESET_STAT_REG, 0x500000BC + + .globl __StackTop + .globl __StackLimit +__StackLimit: + .space Stack_Size + .size __StackLimit, . - __StackLimit +__StackTop: + .size __StackTop, . - __StackTop + + .section .heap + .align 3 +#ifdef __HEAP_SIZE + .equ Heap_Size, __HEAP_SIZE +#else + .equ Heap_Size, 0 +#endif + .globl __HeapBase + .globl __HeapLimit +__HeapBase: + .if Heap_Size + .space Heap_Size + .endif + .size __HeapBase, . - __HeapBase +__HeapLimit: + .size __HeapLimit, . - __HeapLimit + + .section .isr_vector + .align 2 + .globl __isr_vector +__isr_vector: + .long __StackTop + .long Reset_Handler + /* Cortex-M33 interrupts */ + .long NMI_Handler + .long HardFault_Handler + .long MemoryManagement_Handler + .long BusFault_Handler + .long UsageFault_Handler + .long SecureFault_Handler + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long SVC_Handler + .long DebugMonitor_Handler + .long 0 /* Reserved */ + .long PendSV_Handler + .long SysTick_Handler + /* DA1469x interrupts */ + .long SENSOR_NODE_IRQHandler + .long DMA_IRQHandler + .long CHARGER_STATE_IRQHandler + .long CHARGER_ERROR_IRQHandler + .long CMAC2SYS_IRQHandler + .long UART_IRQHandler + .long UART2_IRQHandler + .long UART3_IRQHandler + .long I2C_IRQHandler + .long I2C2_IRQHandler + .long SPI_IRQHandler + .long SPI2_IRQHandler + .long PCM_IRQHandler + .long SRC_IN_IRQHandler + .long SRC_OUT_IRQHandler + .long USB_IRQHandler + .long TIMER_IRQHandler + .long TIMER2_IRQHandler + .long RTC_IRQHandler + .long KEY_WKUP_GPIO_IRQHandler + .long PDC_IRQHandler + .long VBUS_IRQHandler + .long MRM_IRQHandler + .long MOTOR_CONTROLLER_IRQHandler + .long TRNG_IRQHandler + .long DCDC_IRQHandler + .long XTAL32M_RDY_IRQHandler + .long ADC_IRQHandler + .long ADC2_IRQHandler + .long CRYPTO_IRQHandler + .long CAPTIMER1_IRQHandler + .long RFDIAG_IRQHandler + .long LCD_CONTROLLER_IRQHandler + .long PLL_LOCK_IRQHandler + .long TIMER3_IRQHandler + .long TIMER4_IRQHandler + .long LRA_IRQHandler + .long RTC_EVENT_IRQHandler + .long GPIO_P0_IRQHandler + .long GPIO_P1_IRQHandler + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .size __isr_vector, . - __isr_vector + + .text + .thumb + .thumb_func + .align 2 + .globl Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + /* Make sure interrupt vector is remapped at 0x0 */ + ldr r1, =SYS_CTRL_REG + ldrh r2, [r1, #0] + orrs r2, r2, #8 + strh r2, [r1, #0] + +#if !MYNEWT_VAL(RAM_RESIDENT) +/* + * Flash is remapped at 0x0 with an offset, i.e. 0x0 does not correspond to + * 0x16000000 but to start of an image on flash. This is calculated from product + * header by 1st state bootloader and configured in CACHE_FLASH_REG. We need to + * retrieve proper offset value for calculations later. + */ + ldr r1, =CACHE_FLASH_REG + ldr r4, [r1, #0] + mov r2, r4 + mov r3, #0xFFFF + bic r4, r4, r3 /* CACHE_FLASH_REG[FLASH_REGION_BASE] */ + mov r3, #0xFFF0 + and r2, r2, r3 /* CACHE_FLASH_REG[FLASH_REGION_OFFSET] */ + lsr r2, r2, #2 + orr r4, r4, r2 + +/* Copy ISR vector from flash to RAM */ + ldr r1, =__isr_vector_start /* src ptr */ + ldr r2, =__isr_vector_end /* src end */ + ldr r3, =__intvect_start__ /* dst ptr */ +/* Make sure we copy from QSPIC address range, not from remapped range */ + cmp r1, r4 + itt lt + addlt r1, r1, r4 + addlt r2, r2, r4 +.loop_isr_copy: + cmp r1, r2 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r3], #4 + blt .loop_isr_copy + +/* Copy QSPI code from flash to RAM */ + ldr r1, =__text_ram_addr /* src ptr */ + ldr r2, =__text_ram_start__ /* ptr */ + ldr r3, =__text_ram_end__ /* dst end */ +.loop_code_text_ram_copy: + cmp r2, r3 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r2], #4 + blt .loop_code_text_ram_copy + +/* Copy data from flash to RAM */ + ldr r1, =__etext /* src ptr */ + ldr r2, =__data_start__ /* dst ptr */ + ldr r3, =__data_end__ /* dst end */ +.loop_data_copy: + cmp r2, r3 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r2], #4 + blt .loop_data_copy +#endif + +/* Clear BSS */ + movs r0, 0 + ldr r1, =__bss_start__ + ldr r2, =__bss_end__ +.loop_bss_clear: + cmp r1, r2 + itt lt + strlt r0, [r1], #4 + blt .loop_bss_clear + + ldr r0, =__HeapBase + ldr r1, =__HeapLimit +/* Call static constructors */ + bl __libc_init_array + + bl SystemInit + bl main + + .pool + .size Reset_Handler, . - Reset_Handler + +/* Default interrupt handler */ + .type Default_Handler, %function +Default_Handler: + ldr r1, =SYS_CTRL_REG + ldrh r2, [r1, #0] + orrs r2, r2, #0x80 /* DEBUGGER_ENABLE */ + strh r2, [r1, #0] + b . + + .size Default_Handler, . - Default_Handler + +/* Default handlers for all interrupts */ + .macro IRQ handler + .weak \handler + .set \handler, Default_Handler + .endm + + /* Cortex-M33 interrupts */ + IRQ NMI_Handler + IRQ HardFault_Handler + IRQ MemoryManagement_Handler + IRQ BusFault_Handler + IRQ UsageFault_Handler + IRQ SecureFault_Handler + IRQ SVC_Handler + IRQ DebugMonitor_Handler + IRQ PendSV_Handler + IRQ SysTick_Handler + /* DA1469x interrupts */ + IRQ SENSOR_NODE_IRQHandler + IRQ DMA_IRQHandler + IRQ CHARGER_STATE_IRQHandler + IRQ CHARGER_ERROR_IRQHandler + IRQ CMAC2SYS_IRQHandler + IRQ UART_IRQHandler + IRQ UART2_IRQHandler + IRQ UART3_IRQHandler + IRQ I2C_IRQHandler + IRQ I2C2_IRQHandler + IRQ SPI_IRQHandler + IRQ SPI2_IRQHandler + IRQ PCM_IRQHandler + IRQ SRC_IN_IRQHandler + IRQ SRC_OUT_IRQHandler + IRQ USB_IRQHandler + IRQ TIMER_IRQHandler + IRQ TIMER2_IRQHandler + IRQ RTC_IRQHandler + IRQ KEY_WKUP_GPIO_IRQHandler + IRQ PDC_IRQHandler + IRQ VBUS_IRQHandler + IRQ MRM_IRQHandler + IRQ MOTOR_CONTROLLER_IRQHandler + IRQ TRNG_IRQHandler + IRQ DCDC_IRQHandler + IRQ XTAL32M_RDY_IRQHandler + IRQ ADC_IRQHandler + IRQ ADC2_IRQHandler + IRQ CRYPTO_IRQHandler + IRQ CAPTIMER1_IRQHandler + IRQ RFDIAG_IRQHandler + IRQ LCD_CONTROLLER_IRQHandler + IRQ PLL_LOCK_IRQHandler + IRQ TIMER3_IRQHandler + IRQ TIMER4_IRQHandler + IRQ LRA_IRQHandler + IRQ RTC_EVENT_IRQHandler + IRQ GPIO_P0_IRQHandler + IRQ GPIO_P1_IRQHandler + IRQ RESERVED40_IRQHandler + IRQ RESERVED41_IRQHandler + IRQ RESERVED42_IRQHandler + IRQ RESERVED43_IRQHandler + IRQ RESERVED44_IRQHandler + IRQ RESERVED45_IRQHandler + IRQ RESERVED46_IRQHandler + IRQ RESERVED47_IRQHandler + +.end diff --git a/tinyusb/hw/bsp/da14695_dk_usb/product_header.dump b/tinyusb/hw/bsp/da14695_dk_usb/product_header.dump Binary files differnew file mode 100755 index 00000000..ea484224 --- /dev/null +++ b/tinyusb/hw/bsp/da14695_dk_usb/product_header.dump diff --git a/tinyusb/hw/bsp/da14695_dk_usb/syscfg/syscfg.h b/tinyusb/hw/bsp/da14695_dk_usb/syscfg/syscfg.h new file mode 100755 index 00000000..6cbb4319 --- /dev/null +++ b/tinyusb/hw/bsp/da14695_dk_usb/syscfg/syscfg.h @@ -0,0 +1,34 @@ +/** + * This file was generated by Apache newt version: 1.9.0-dev + */ + +#ifndef H_MYNEWT_SYSCFG_ +#define H_MYNEWT_SYSCFG_ + +/** + * This macro exists to ensure code includes this header when needed. If code + * checks the existence of a setting directly via ifdef without including this + * header, the setting macro will silently evaluate to 0. In contrast, an + * attempt to use these macros without including this header will result in a + * compiler error. + */ +#define MYNEWT_VAL(_name) MYNEWT_VAL_ ## _name +#define MYNEWT_VAL_CHOICE(_name, _val) MYNEWT_VAL_ ## _name ## __ ## _val + +#ifndef MYNEWT_VAL_RAM_RESIDENT +#define MYNEWT_VAL_RAM_RESIDENT (0) +#endif + +#ifndef MYNEWT_VAL_MCU_GPIO_MAX_IRQ +#define MYNEWT_VAL_MCU_GPIO_MAX_IRQ (4) +#endif + +#ifndef MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM +#define MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM (-1) +#endif + +#ifndef MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US +#define MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US (2000) +#endif + +#endif diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/board.mk b/tinyusb/hw/bsp/da1469x_dk_pro/board.mk new file mode 100755 index 00000000..980fc422 --- /dev/null +++ b/tinyusb/hw/bsp/da1469x_dk_pro/board.mk @@ -0,0 +1,55 @@ +CFLAGS += \ + -flto \ + -mthumb \ + -mthumb-interwork \ + -mabi=aapcs \ + -mcpu=cortex-m33+nodsp \ + -mfloat-abi=hard \ + -mfpu=fpv5-sp-d16 \ + -nostdlib \ + -DCORE_M33 \ + -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ + -DCFG_TUD_ENDPOINT0_SIZE=8\ + +MCU_FAMILY_DIR = hw/mcu/dialog/da1469x + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/da1469x.ld + +# While this is for da1469x chip, there is chance that da1468x chip family will also work +SRC_C += \ + src/portable/dialog/da146xx/dcd_da146xx.c \ + $(MCU_FAMILY_DIR)/src/system_da1469x.c \ + $(MCU_FAMILY_DIR)/src/da1469x_clock.c \ + $(MCU_FAMILY_DIR)/src/hal_gpio.c \ + +SRC_S += hw/bsp/$(BOARD)/gcc_startup_da1469x.S + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_FAMILY_DIR)/include \ + $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM33_NTZ/non_secure + +# For flash-jlink target +JLINK_DEVICE = DA14699 + +# flash using jlink but with some twists +flash: flash-dialog + +flash-dialog: $(BUILD)/$(PROJECT).bin + @echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h + @echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h + mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img + cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin + cat $^.img >> $(BUILD)/$(BOARD)-image.bin + @echo r > $(BUILD)/$(BOARD).jlink + @echo halt >> $(BUILD)/$(BOARD).jlink + @echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink + @echo r >> $(BUILD)/$(BOARD).jlink + @echo go >> $(BUILD)/$(BOARD).jlink + @echo exit >> $(BUILD)/$(BOARD).jlink + $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink + diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/tinyusb/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c new file mode 100755 index 00000000..85fa1715 --- /dev/null +++ b/tinyusb/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c @@ -0,0 +1,127 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include <hal/hal_gpio.h> +#include <mcu/mcu.h> + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PIN 33 +#define LED_STATE_ON 1 +#define LED_STATE_OFF 0 + +#define BUTTON_PIN 6 + +void UnhandledIRQ(void) +{ + CRG_TOP->SYS_CTRL_REG = 0x80; + __BKPT(1); + while(1); +} + +void board_init(void) +{ + // LED + hal_gpio_init_out(LED_PIN, LED_STATE_ON); + + hal_gpio_init_out(1, 0); + hal_gpio_init_out(2, 0); + hal_gpio_init_out(3, 0); + hal_gpio_init_out(4, 0); + hal_gpio_init_out(5, 0); + + // Button + hal_gpio_init_in(BUTTON_PIN, HAL_GPIO_PULL_NONE); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + + NVIC_SetPriority(USB_IRQn, 2); + + /* Setup USB IRQ */ + NVIC_SetPriority(USB_IRQn, 2); + NVIC_EnableIRQ(USB_IRQn); + + /* Use PLL96 / 2 clock not HCLK */ + CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_USB_CLK_SRC_Msk; + + mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); + mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + hal_gpio_write(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF); +} + +uint32_t board_button_read(void) +{ + // button is active LOW + return hal_gpio_read(BUTTON_PIN) ^ 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void)buf; + (void)len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void)buf; + (void)len; + + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/da1469x.ld b/tinyusb/hw/bsp/da1469x_dk_pro/da1469x.ld new file mode 100755 index 00000000..96507d6e --- /dev/null +++ b/tinyusb/hw/bsp/da1469x_dk_pro/da1469x.ld @@ -0,0 +1,245 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + +MEMORY +{ + /* + * Flash is remapped at 0x0 by 1st stage bootloader, but this is done with + * an offset derived from image header thus it is safer to use remapped + * address space at 0x0 instead of QSPI_M address space at 0x16000000. + * Bootloader partition is 32K, but 9K is currently reserved for product + * header (8K) and image header (1K). + * First 512 bytes of SYSRAM are remapped at 0x0 and used as ISR vector + * (there's no need to reallocate ISR vector) and thus cannot be used by + * application. + */ + + FLASH (r) : ORIGIN = (0x00000000), LENGTH = (1024 * 1024) + RAM (rw) : ORIGIN = (0x20000000), LENGTH = (512 * 1024) +} + +OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapBase + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __bssnz_start__ + * __bssnz_end__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + __text = .; + + .text : + { + __isr_vector_start = .; + KEEP(*(.isr_vector)) + /* ISR vector shall have exactly 512 bytes */ + . = __isr_vector_start + 0x200; + __isr_vector_end = .; + + *(.text) + *(.text.*) + + *(.libcmac.rom) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + *(.eh_frame*) + . = ALIGN(4); + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } > FLASH + + __exidx_start = .; + .ARM : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + . = ALIGN(4); + } > FLASH + __exidx_end = .; + + .intvect : + { + . = ALIGN(4); + __intvect_start__ = .; + . = . + (__isr_vector_end - __isr_vector_start); + . = ALIGN(4); + } > RAM + + .sleep_state (NOLOAD) : + { + . = ALIGN(4); + *(sleep_state) + } > RAM + + /* This section will be zeroed by RTT package init */ + .rtt (NOLOAD): + { + . = ALIGN(4); + *(.rtt) + . = ALIGN(4); + } > RAM + + __text_ram_addr = LOADADDR(.text_ram); + + .text_ram : + { + . = ALIGN(4); + __text_ram_start__ = .; + *(.text_ram*) + . = ALIGN(4); + __text_ram_end__ = .; + } > RAM AT > FLASH + + __etext = LOADADDR(.data); + + .data : + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + *(.preinit_array) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + *(SORT(.init_array.*)) + *(.init_array) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + *(SORT(.fini_array.*)) + *(.fini_array) + PROVIDE_HIDDEN (__fini_array_end = .); + + *(.jcr) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + } > RAM AT > FLASH + + .bssnz : + { + . = ALIGN(4); + __bssnz_start__ = .; + *(.bss.core.nz*) + . = ALIGN(4); + __bssnz_end__ = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .cmac (NOLOAD) : + { + . = ALIGN(0x400); + *(.libcmac.ram) + } > RAM + + /* Heap starts after BSS */ + . = ALIGN(8); + __HeapBase = .; + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + _ram_start = ORIGIN(RAM); + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Top of head is the bottom of the stack */ + __HeapLimit = __StackLimit; + end = __HeapLimit; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack") + + /* Check that intvect is at the beginning of RAM */ + ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") +} + diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S b/tinyusb/hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S new file mode 100755 index 00000000..d47fbcd9 --- /dev/null +++ b/tinyusb/hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S @@ -0,0 +1,301 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + + #include "syscfg/syscfg.h" + + .syntax unified + .arch armv7-m + + .section .stack + .align 3 +#ifdef __STACK_SIZE + .equ Stack_Size, __STACK_SIZE +#else + .equ Stack_Size, 0xC00 +#endif + .equ SYS_CTRL_REG, 0x50000024 + .equ CACHE_FLASH_REG, 0x100C0040 + .equ RESET_STAT_REG, 0x500000BC + + .globl __StackTop + .globl __StackLimit +__StackLimit: + .space Stack_Size + .size __StackLimit, . - __StackLimit +__StackTop: + .size __StackTop, . - __StackTop + + .section .heap + .align 3 +#ifdef __HEAP_SIZE + .equ Heap_Size, __HEAP_SIZE +#else + .equ Heap_Size, 0 +#endif + .globl __HeapBase + .globl __HeapLimit +__HeapBase: + .if Heap_Size + .space Heap_Size + .endif + .size __HeapBase, . - __HeapBase +__HeapLimit: + .size __HeapLimit, . - __HeapLimit + + .section .isr_vector + .align 2 + .globl __isr_vector +__isr_vector: + .long __StackTop + .long Reset_Handler + /* Cortex-M33 interrupts */ + .long NMI_Handler + .long HardFault_Handler + .long MemoryManagement_Handler + .long BusFault_Handler + .long UsageFault_Handler + .long SecureFault_Handler + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long SVC_Handler + .long DebugMonitor_Handler + .long 0 /* Reserved */ + .long PendSV_Handler + .long SysTick_Handler + /* DA1469x interrupts */ + .long SENSOR_NODE_IRQHandler + .long DMA_IRQHandler + .long CHARGER_STATE_IRQHandler + .long CHARGER_ERROR_IRQHandler + .long CMAC2SYS_IRQHandler + .long UART_IRQHandler + .long UART2_IRQHandler + .long UART3_IRQHandler + .long I2C_IRQHandler + .long I2C2_IRQHandler + .long SPI_IRQHandler + .long SPI2_IRQHandler + .long PCM_IRQHandler + .long SRC_IN_IRQHandler + .long SRC_OUT_IRQHandler + .long USB_IRQHandler + .long TIMER_IRQHandler + .long TIMER2_IRQHandler + .long RTC_IRQHandler + .long KEY_WKUP_GPIO_IRQHandler + .long PDC_IRQHandler + .long VBUS_IRQHandler + .long MRM_IRQHandler + .long MOTOR_CONTROLLER_IRQHandler + .long TRNG_IRQHandler + .long DCDC_IRQHandler + .long XTAL32M_RDY_IRQHandler + .long ADC_IRQHandler + .long ADC2_IRQHandler + .long CRYPTO_IRQHandler + .long CAPTIMER1_IRQHandler + .long RFDIAG_IRQHandler + .long LCD_CONTROLLER_IRQHandler + .long PLL_LOCK_IRQHandler + .long TIMER3_IRQHandler + .long TIMER4_IRQHandler + .long LRA_IRQHandler + .long RTC_EVENT_IRQHandler + .long GPIO_P0_IRQHandler + .long GPIO_P1_IRQHandler + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .size __isr_vector, . - __isr_vector + + .text + .thumb + .thumb_func + .align 2 + .globl Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + /* Make sure interrupt vector is remapped at 0x0 */ + ldr r1, =SYS_CTRL_REG + ldrh r2, [r1, #0] + orrs r2, r2, #8 + strh r2, [r1, #0] + +#if !MYNEWT_VAL(RAM_RESIDENT) +/* + * Flash is remapped at 0x0 with an offset, i.e. 0x0 does not correspond to + * 0x16000000 but to start of an image on flash. This is calculated from product + * header by 1st state bootloader and configured in CACHE_FLASH_REG. We need to + * retrieve proper offset value for calculations later. + */ + ldr r1, =CACHE_FLASH_REG + ldr r4, [r1, #0] + mov r2, r4 + mov r3, #0xFFFF + bic r4, r4, r3 /* CACHE_FLASH_REG[FLASH_REGION_BASE] */ + mov r3, #0xFFF0 + and r2, r2, r3 /* CACHE_FLASH_REG[FLASH_REGION_OFFSET] */ + lsr r2, r2, #2 + orr r4, r4, r2 + +/* Copy ISR vector from flash to RAM */ + ldr r1, =__isr_vector_start /* src ptr */ + ldr r2, =__isr_vector_end /* src end */ + ldr r3, =__intvect_start__ /* dst ptr */ +/* Make sure we copy from QSPIC address range, not from remapped range */ + cmp r1, r4 + itt lt + addlt r1, r1, r4 + addlt r2, r2, r4 +.loop_isr_copy: + cmp r1, r2 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r3], #4 + blt .loop_isr_copy + +/* Copy QSPI code from flash to RAM */ + ldr r1, =__text_ram_addr /* src ptr */ + ldr r2, =__text_ram_start__ /* ptr */ + ldr r3, =__text_ram_end__ /* dst end */ +.loop_code_text_ram_copy: + cmp r2, r3 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r2], #4 + blt .loop_code_text_ram_copy + +/* Copy data from flash to RAM */ + ldr r1, =__etext /* src ptr */ + ldr r2, =__data_start__ /* dst ptr */ + ldr r3, =__data_end__ /* dst end */ +.loop_data_copy: + cmp r2, r3 + ittt lt + ldrlt r0, [r1], #4 + strlt r0, [r2], #4 + blt .loop_data_copy +#endif + +/* Clear BSS */ + movs r0, 0 + ldr r1, =__bss_start__ + ldr r2, =__bss_end__ +.loop_bss_clear: + cmp r1, r2 + itt lt + strlt r0, [r1], #4 + blt .loop_bss_clear + + ldr r0, =__HeapBase + ldr r1, =__HeapLimit +/* Call static constructors */ + bl __libc_init_array + + bl SystemInit + bl main + + .pool + .size Reset_Handler, . - Reset_Handler + +/* Default interrupt handler */ + .type Default_Handler, %function +Default_Handler: + ldr r1, =SYS_CTRL_REG + ldrh r2, [r1, #0] + orrs r2, r2, #0x80 /* DEBUGGER_ENABLE */ + strh r2, [r1, #0] + b . + + .size Default_Handler, . - Default_Handler + +/* Default handlers for all interrupts */ + .macro IRQ handler + .weak \handler + .set \handler, Default_Handler + .endm + + /* Cortex-M33 interrupts */ + IRQ NMI_Handler + IRQ HardFault_Handler + IRQ MemoryManagement_Handler + IRQ BusFault_Handler + IRQ UsageFault_Handler + IRQ SecureFault_Handler + IRQ SVC_Handler + IRQ DebugMonitor_Handler + IRQ PendSV_Handler + IRQ SysTick_Handler + /* DA1469x interrupts */ + IRQ SENSOR_NODE_IRQHandler + IRQ DMA_IRQHandler + IRQ CHARGER_STATE_IRQHandler + IRQ CHARGER_ERROR_IRQHandler + IRQ CMAC2SYS_IRQHandler + IRQ UART_IRQHandler + IRQ UART2_IRQHandler + IRQ UART3_IRQHandler + IRQ I2C_IRQHandler + IRQ I2C2_IRQHandler + IRQ SPI_IRQHandler + IRQ SPI2_IRQHandler + IRQ PCM_IRQHandler + IRQ SRC_IN_IRQHandler + IRQ SRC_OUT_IRQHandler + IRQ USB_IRQHandler + IRQ TIMER_IRQHandler + IRQ TIMER2_IRQHandler + IRQ RTC_IRQHandler + IRQ KEY_WKUP_GPIO_IRQHandler + IRQ PDC_IRQHandler + IRQ VBUS_IRQHandler + IRQ MRM_IRQHandler + IRQ MOTOR_CONTROLLER_IRQHandler + IRQ TRNG_IRQHandler + IRQ DCDC_IRQHandler + IRQ XTAL32M_RDY_IRQHandler + IRQ ADC_IRQHandler + IRQ ADC2_IRQHandler + IRQ CRYPTO_IRQHandler + IRQ CAPTIMER1_IRQHandler + IRQ RFDIAG_IRQHandler + IRQ LCD_CONTROLLER_IRQHandler + IRQ PLL_LOCK_IRQHandler + IRQ TIMER3_IRQHandler + IRQ TIMER4_IRQHandler + IRQ LRA_IRQHandler + IRQ RTC_EVENT_IRQHandler + IRQ GPIO_P0_IRQHandler + IRQ GPIO_P1_IRQHandler + IRQ RESERVED40_IRQHandler + IRQ RESERVED41_IRQHandler + IRQ RESERVED42_IRQHandler + IRQ RESERVED43_IRQHandler + IRQ RESERVED44_IRQHandler + IRQ RESERVED45_IRQHandler + IRQ RESERVED46_IRQHandler + IRQ RESERVED47_IRQHandler + +.end diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/product_header.dump b/tinyusb/hw/bsp/da1469x_dk_pro/product_header.dump Binary files differnew file mode 100755 index 00000000..ea484224 --- /dev/null +++ b/tinyusb/hw/bsp/da1469x_dk_pro/product_header.dump diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/syscfg/syscfg.h b/tinyusb/hw/bsp/da1469x_dk_pro/syscfg/syscfg.h new file mode 100755 index 00000000..6cbb4319 --- /dev/null +++ b/tinyusb/hw/bsp/da1469x_dk_pro/syscfg/syscfg.h @@ -0,0 +1,34 @@ +/** + * This file was generated by Apache newt version: 1.9.0-dev + */ + +#ifndef H_MYNEWT_SYSCFG_ +#define H_MYNEWT_SYSCFG_ + +/** + * This macro exists to ensure code includes this header when needed. If code + * checks the existence of a setting directly via ifdef without including this + * header, the setting macro will silently evaluate to 0. In contrast, an + * attempt to use these macros without including this header will result in a + * compiler error. + */ +#define MYNEWT_VAL(_name) MYNEWT_VAL_ ## _name +#define MYNEWT_VAL_CHOICE(_name, _val) MYNEWT_VAL_ ## _name ## __ ## _val + +#ifndef MYNEWT_VAL_RAM_RESIDENT +#define MYNEWT_VAL_RAM_RESIDENT (0) +#endif + +#ifndef MYNEWT_VAL_MCU_GPIO_MAX_IRQ +#define MYNEWT_VAL_MCU_GPIO_MAX_IRQ (4) +#endif + +#ifndef MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM +#define MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM (-1) +#endif + +#ifndef MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US +#define MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US (2000) +#endif + +#endif diff --git a/tinyusb/hw/bsp/ea4088qs/board.mk b/tinyusb/hw/bsp/ea4088qs/board.mk new file mode 100755 index 00000000..c624a5cf --- /dev/null +++ b/tinyusb/hw/bsp/ea4088qs/board.mk @@ -0,0 +1,46 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib \ + -DCORE_M4 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ + -DCFG_TUSB_MCU=OPT_MCU_LPC40XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc4088.ld + +SRC_C += \ + src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ + $(MCU_DIR)/src/chip_17xx_40xx.c \ + $(MCU_DIR)/src/clock_17xx_40xx.c \ + $(MCU_DIR)/src/gpio_17xx_40xx.c \ + $(MCU_DIR)/src/iocon_17xx_40xx.c \ + $(MCU_DIR)/src/sysctl_17xx_40xx.c \ + $(MCU_DIR)/src/sysinit_17xx_40xx.c \ + $(MCU_DIR)/src/uart_17xx_40xx.c \ + $(MCU_DIR)/src/fpu_init.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = LPC4088 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/ea4088qs/ea4088qs.c b/tinyusb/hw/bsp/ea4088qs/ea4088qs.c new file mode 100755 index 00000000..b25f9101 --- /dev/null +++ b/tinyusb/hw/bsp/ea4088qs/ea4088qs.c @@ -0,0 +1,190 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define LED_PORT 2 +#define LED_PIN 19 + +#define BUTTON_PORT 2 +#define BUTTON_PIN 10 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + // LED + {2, 19, (IOCON_FUNC0 | IOCON_MODE_INACT)}, + + // Button + {2, 10, (IOCON_FUNC0 | IOCON_MODE_INACT | IOCON_MODE_PULLUP)}, +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + // USB1 as Host + {0, 29, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+1 + {0, 30, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D-1 + {1, 18, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED1 + {1, 19, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // PPWR1 +// {2, 14, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // VBUS1 +// {2, 15, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // OVRCR1 + + // USB2 as Device + {0, 31, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+2 + {0, 13, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED + {0, 14, (IOCON_FUNC3 | IOCON_MODE_INACT)}, // CONNECT2 + + /* VBUS is not connected on this board, so leave the pin at default setting. */ + /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; + +#if __FPU_USED == 1 + fpuInit(); +#endif +#endif // __USE_LPCOPEN + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* CPU clock source starts with IRC */ + /* Enable PBOOST for CPU clock over 100MHz */ + Chip_SYSCTL_EnableBoost(); + + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + + // UART + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + + // Port1 as Host, Port2: Device + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19 , // AHB + OTG + Host + USBCLK_ALL = 0x1B // Host + Device + OTG + AHB + }; + + LPC_USB->OTGClkCtrl = USBCLK_ALL; + while ( (LPC_USB->OTGClkSt & USBCLK_ALL) != USBCLK_ALL ) {} + + // set portfunc: USB1 = host, USB2 = device + LPC_USB->StCtrl = 0x3; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + //return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/ea4088qs/lpc4088.ld b/tinyusb/hw/bsp/ea4088qs/lpc4088.ld new file mode 100755 index 00000000..4b1cddd6 --- /dev/null +++ b/tinyusb/hw/bsp/ea4088qs/lpc4088.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC4088 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 5:16:07 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ + RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ + __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ + __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamPeriph32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamPeriph32) + *(.data.$RAM2*) + *(.data.$RamPeriph32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamPeriph32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc64 + + /* Main DATA section (RamLoc64) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc64 AT>MFlash512 + + /* BSS section for RamPeriph32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamPeriph32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamPeriph32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc64 + + /* NOINIT section for RamPeriph32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamPeriph32*) + . = ALIGN(4) ; + } > RamPeriph32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc64 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc64 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/ea4357/board.mk b/tinyusb/hw/bsp/ea4357/board.mk new file mode 100755 index 00000000..86391ab5 --- /dev/null +++ b/tinyusb/hw/bsp/ea4357/board.mk @@ -0,0 +1,46 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib \ + -DCORE_M4 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC43XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc4357.ld + +SRC_C += \ + src/portable/nxp/transdimension/dcd_transdimension.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ + $(MCU_DIR)/src/chip_18xx_43xx.c \ + $(MCU_DIR)/src/clock_18xx_43xx.c \ + $(MCU_DIR)/src/gpio_18xx_43xx.c \ + $(MCU_DIR)/src/sysinit_18xx_43xx.c \ + $(MCU_DIR)/src/i2c_18xx_43xx.c \ + $(MCU_DIR)/src/i2cm_18xx_43xx.c \ + $(MCU_DIR)/src/uart_18xx_43xx.c \ + $(MCU_DIR)/src/fpu_init.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc \ + $(TOP)/$(MCU_DIR)/inc/config_43xx + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = LPC4357_M4 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/ea4357/ea4357.c b/tinyusb/hw/bsp/ea4357/ea4357.c new file mode 100755 index 00000000..aa206a28 --- /dev/null +++ b/tinyusb/hw/bsp/ea4357/ea4357.c @@ -0,0 +1,291 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" +#include "pca9532.h" + +#define UART_DEV LPC_USART0 +#define UART_PORT 0x0f +#define UART_PIN_TX 10 +#define UART_PIN_RX 11 + +// P9_1 joystick down +#define BUTTON_PORT 4 +#define BUTTON_PIN 13 + +//static const struct { +// uint8_t mux_port; +// uint8_t mux_pin; +// +// uint8_t gpio_port; +// uint8_t gpio_pin; +//}buttons[] = +//{ +// {0x0a, 3, 4, 10 }, // Joystick up +// {0x09, 1, 4, 13 }, // Joystick down +// {0x0a, 2, 4, 9 }, // Joystick left +// {0x09, 0, 4, 12 }, // Joystick right +// {0x0a, 1, 4, 8 }, // Joystick press +// {0x02, 7, 0, 7 }, // SW6 +//}; + +/*------------------------------------------------------------------*/ +/* BOARD API + *------------------------------------------------------------------*/ + +/* System configuration variables used by chip driver */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +static const PINMUX_GRP_T pinmuxing[] = +{ + // Button ( Joystick down ) + {0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)}, + + // UART + {UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC1}, + {UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1}, + + // USB +}; + +/* Pin clock mux values, re-used structure, value in first index is meaningless */ +static const PINMUX_GRP_T pinclockmuxing[] = +{ + {0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; + +#if __FPU_USED == 1 + fpuInit(); +#endif +#endif // __USE_LPCOPEN + + /* Setup system level pin muxing */ + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* Clock pins only, group field not used */ + for (int i = 0; i <(int) (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) + { + Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); + } + + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED via pca9532 I2C + Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE); + Chip_I2C_Init(I2C0); + Chip_I2C_SetClockRate(I2C0, 100000); + Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling); + + pca9532_init(); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + //------------- UART -------------// + Chip_UART_Init(UART_DEV); + Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); + Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); + Chip_UART_TXEnable(UART_DEV); + + //------------- USB -------------// + enum { + USBMODE_DEVICE = 2, + USBMODE_HOST = 3 + }; + + enum { + USBMODE_VBUS_LOW = 0, + USBMODE_VBUS_HIGH = 1 + }; + + /* From EA4357 user manual + * + * USB0 Device operation: + * - Insert jumpers in position 1-2 in JP17/JP18/JP19. + * - GPIO28 controls USB connect functionality + * - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default. + * - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS + * sensing. + * + * USB0 Host operation: + * - insert jumpers in position 2-3 in JP17/JP18/JP19. + * - USB Host power is controlled via distribution switch U20 (found in schematic page 11). + * - Signal GPIO26 is active low and enables +5V on VBUS2. + * - LED35 light whenever +5V is present on VBUS2. + * - GPIO55 is connected to status feedback from the distribution switch. + * - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active + * + * Note: + * - Insert jumpers in position 2-3 in JP17/JP18/JP19 + * - Insert jumpers in JP31 (OTG) + */ +#if CFG_TUSB_RHPORT0_MODE + Chip_USB0_Init(); +#endif + + /* From EA4357 user manual + * + * For USB1 Device: + * - a 1.5Kohm pull-up resistor is needed on the USB DP data signal. There are two methods to create this. + * JP15 is inserted and the pull-up resistor is always enabled. Alternatively, the pull-up resistor is activated + * inside the USB OTG chip (U31), and this has to be done via the I2C interface of GPIO52/GPIO53. In the latter case, + * JP15 shall not be inserted. + * - J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for + * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status + * of VBUS can be read via U31. + * - JP16 shall not be inserted. + * + * For USB1 Host: + * - 15Kohm pull-down resistors are needed on the USB data signals. These are activated inside the USB OTG chip (U31), + * and this has to be done via the I2C interface of GPIO52/GPIO53. + * - J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB + * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default + * since SJ5 is normally connected between pin 1-2. + * - LED34 lights green when +5V is available on J20. + * - JP15 shall not be inserted. JP16 has no effect + */ +#if CFG_TUSB_RHPORT1_MODE + Chip_USB1_Init(); +#endif + + // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) + Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. + Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); + #endif + + // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required + // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_int_handler(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) + { + pca9532_setLeds( LED1, 0 ); + }else + { + pca9532_setLeds( 0, LED1); + } +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + //return UART_ReceiveByte(BOARD_UART_DEV); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + uint8_t const* buf8 = (uint8_t const*) buf; + for(int i=0; i<len; i++) + { + while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {} + Chip_UART_SendByte(UART_DEV, buf8[i]); + } + + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/ea4357/lpc4357.ld b/tinyusb/hw/bsp/ea4357/lpc4357.ld new file mode 100755 index 00000000..14a0df32 --- /dev/null +++ b/tinyusb/hw/bsp/ea4357/lpc4357.ld @@ -0,0 +1,324 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC4357 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 5:48:43 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ + __base_Flash = 0x1a000000 ; /* Flash */ + __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ + __base_Flash2 = 0x1b000000 ; /* Flash2 */ + __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + + +ENTRY(ResetISR) + +SECTIONS +{ + .text_Flash2 : ALIGN(4) + { + FILL(0xff) + *(.text_Flash2*) /* for compatibility with previous releases */ + *(.text_MFlashB512*) /* for compatibility with previous releases */ + *(.text.$Flash2*) + *(.text.$MFlashB512*) + *(.rodata.$Flash2*) + *(.rodata.$MFlashB512*) + } > MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlashA512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2*) + *(.data.$RamLoc40*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamLoc40 AT>MFlashA512 + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamAHB32 AT>MFlashA512 + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4*) + *(.data.$RamAHB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + } > RamAHB16 AT>MFlashA512 + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5*) + *(.data.$RamAHB_ETB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamLoc40*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + *(.bss.$RAM4*) + *(.bss.$RamAHB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + } > RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + *(.bss.$RAM5*) + *(.bss.$RamAHB_ETB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + } > RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamLoc40*) + . = ALIGN(4) ; + } > RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM4*) + *(.noinit.$RamAHB16*) + . = ALIGN(4) ; + } > RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM5*) + *(.noinit.$RamAHB_ETB16*) + . = ALIGN(4) ; + } > RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/ea4357/pca9532.c b/tinyusb/hw/bsp/ea4357/pca9532.c new file mode 100755 index 00000000..eae3805c --- /dev/null +++ b/tinyusb/hw/bsp/ea4357/pca9532.c @@ -0,0 +1,352 @@ +/***************************************************************************** + * + * Copyright(C) 2011, Embedded Artists AB + * All rights reserved. + * + ****************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * Embedded Artists AB assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. Embedded Artists AB + * reserves the right to make changes in the software without + * notification. Embedded Artists AB also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ + +/* + * NOTE: I2C must have been initialized before calling any functions in this + * file. + */ + +/****************************************************************************** + * Includes + *****************************************************************************/ + +//#include "board.h" +#include "chip.h" + +#include "pca9532.h" + +/****************************************************************************** + * Defines and typedefs + *****************************************************************************/ + +#define I2C_PORT (LPC_I2C0) + +#define LS_MODE_ON 0x01 +#define LS_MODE_BLINK0 0x02 +#define LS_MODE_BLINK1 0x03 + +/****************************************************************************** + * External global variables + *****************************************************************************/ + + +/****************************************************************************** + * Local variables + *****************************************************************************/ + +static uint16_t blink0Shadow = 0; +static uint16_t blink1Shadow = 0; +static uint16_t ledStateShadow = 0; + +/****************************************************************************** + * Local Functions + *****************************************************************************/ + +static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) +{ + I2CM_XFER_T i2cData; + + i2cData.slaveAddr = addr; + i2cData.options = 0; + i2cData.status = 0; + i2cData.txBuff = buf; + i2cData.txSz = len; + i2cData.rxBuff = NULL; + i2cData.rxSz = 0; + + if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { + return ERROR; + } + return SUCCESS; +} + +static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) +{ + I2CM_XFER_T i2cData; + + i2cData.slaveAddr = addr; + i2cData.options = 0; + i2cData.status = 0; + i2cData.txBuff = NULL; + i2cData.txSz = 0; + i2cData.rxBuff = buf; + i2cData.rxSz = len; + + if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { + return ERROR; + } + return SUCCESS; +} + +static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode) +{ +#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 ) + + int i = 0; + + for (i = 0; i < 4; i++) { + + ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0) + | (IS_LED_SET(0x0002, states)*mode << 2) + | (IS_LED_SET(0x0004, states)*mode << 4) + | (IS_LED_SET(0x0008, states)*mode << 6) ); + + states >>= 4; + } +} + +static void setLeds(void) +{ + uint8_t buf[5]; + uint8_t ls[4] = {0,0,0,0}; + uint16_t states = ledStateShadow; + + /* LEDs in On/Off state */ + setLsStates(states, ls, LS_MODE_ON); + + /* set the LEDs that should blink */ + setLsStates(blink0Shadow, ls, LS_MODE_BLINK0); + setLsStates(blink1Shadow, ls, LS_MODE_BLINK1); + + + buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC; + buf[1] = ls[0]; + buf[2] = ls[1]; + buf[3] = ls[2]; + buf[4] = ls[3]; + I2CWrite(PCA9532_I2C_ADDR, buf, 5); +} + +/****************************************************************************** + * Public Functions + *****************************************************************************/ + +/****************************************************************************** + * + * Description: + * Initialize the PCA9532 Device + * + *****************************************************************************/ +void pca9532_init (void) +{ + /* nothing to initialize */ +} + +/****************************************************************************** + * + * Description: + * Get the LED states + * + * Params: + * [in] shadow - TRUE if the states should be retrieved from the shadow + * variables. The shadow variable are updated when any + * of setLeds, setBlink0Leds and/or setBlink1Leds are + * called. + * + * FALSE if the state should be retrieved from the PCA9532 + * device. A blinkin LED may be reported as on or off + * depending on the state when calling the function. + * + * Returns: + * A mask where a 1 indicates that a LED is on (or blinking). + * + *****************************************************************************/ +uint16_t pca9532_getLedState (uint32_t shadow) +{ + uint8_t buf[2]; + uint16_t ret = 0; + + if (shadow) { + /* a blink LED is reported as on*/ + ret = (ledStateShadow | blink0Shadow | blink1Shadow); + } + else { + + /* + * A blinking LED may be reported as on or off depending on + * its state when reading the Input register. + */ + + buf[0] = PCA9532_INPUT0; + I2CWrite(PCA9532_I2C_ADDR, buf, 1); + + I2CRead(PCA9532_I2C_ADDR, buf, 1); + ret = buf[0]; + + + buf[0] = PCA9532_INPUT1; + I2CWrite(PCA9532_I2C_ADDR, buf, 1); + + I2CRead(PCA9532_I2C_ADDR, buf, 1); + ret |= (buf[0] << 8); + + + /* invert since LEDs are active low */ + ret = ((~ret) & 0xFFFF); + } + + return (ret & ~PCA9532_NOT_USED); +} + + +/****************************************************************************** + * + * Description: + * Set LED states (on or off). + * + * Params: + * [in] ledOnMask - The LEDs that should be turned on. This mask has + * priority over ledOffMask + * [in] ledOffMask - The LEDs that should be turned off. + * + *****************************************************************************/ +void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask) +{ + /* turn off leds */ + ledStateShadow &= (~(ledOffMask) & 0xffff); + + /* ledOnMask has priority over ledOffMask */ + ledStateShadow |= ledOnMask; + + /* turn off blinking */ + blink0Shadow &= (~(ledOffMask) & 0xffff); + blink1Shadow &= (~(ledOffMask) & 0xffff); + + setLeds(); +} + +/****************************************************************************** + * + * Description: + * Set the blink period for PWM0. Valid values are 0 - 255 where 0 + * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. + * + * Params: + * [in] period - the period for pwm0 + * + *****************************************************************************/ +void pca9532_setBlink0Period(uint8_t period) +{ + uint8_t buf[2]; + + buf[0] = PCA9532_PSC0; + buf[1] = period; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED + * is on 25% of the period. + * + * Params: + * [in] duty - duty cycle + * + *****************************************************************************/ +void pca9532_setBlink0Duty(uint8_t duty) +{ + uint8_t buf[2]; + uint32_t tmp = duty; + if (tmp > 100) { + tmp = 100; + } + + tmp = (256 * tmp)/100; + + buf[0] = PCA9532_PWM0; + buf[1] = tmp; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the LEDs that should blink with rate and duty cycle from PWM0. + * Blinking is turned off with pca9532_setLeds. + * + * Params: + * [in] ledMask - LEDs that should blink. + * + *****************************************************************************/ +void pca9532_setBlink0Leds(uint16_t ledMask) +{ + blink0Shadow |= ledMask; + setLeds(); +} + +/****************************************************************************** + * + * Description: + * Set the blink period for PWM1. Valid values are 0 - 255 where 0 + * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. + * + * Params: + * [in] period - The period for PWM1 + * + *****************************************************************************/ +void pca9532_setBlink1Period(uint8_t period) +{ + uint8_t buf[2]; + + buf[0] = PCA9532_PSC1; + buf[1] = period; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED + * is on 25% of the period. + * + * Params: + * [in] duty - duty cycle. + * + *****************************************************************************/ +void pca9532_setBlink1Duty(uint8_t duty) +{ + uint8_t buf[2]; + + uint32_t tmp = duty; + if (tmp > 100) { + tmp = 100; + } + + tmp = (256 * tmp)/100; + + buf[0] = PCA9532_PWM1; + buf[1] = tmp; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the LEDs that should blink with rate and duty cycle from PWM1. + * Blinking is turned off with pca9532_setLeds. + * + * Params: + * [in] ledMask - LEDs that should blink. + * + *****************************************************************************/ +void pca9532_setBlink1Leds(uint16_t ledMask) +{ + blink1Shadow |= ledMask; + setLeds(); +} diff --git a/tinyusb/hw/bsp/ea4357/pca9532.h b/tinyusb/hw/bsp/ea4357/pca9532.h new file mode 100755 index 00000000..7a7c6e14 --- /dev/null +++ b/tinyusb/hw/bsp/ea4357/pca9532.h @@ -0,0 +1,94 @@ +/***************************************************************************** + * + * Copyright(C) 2011, Embedded Artists AB + * All rights reserved. + * + ****************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * Embedded Artists AB assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. Embedded Artists AB + * reserves the right to make changes in the software without + * notification. Embedded Artists AB also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ +#ifndef __PCA9532C_H +#define __PCA9532C_H + + +#define PCA9532_I2C_ADDR (0xC0>>1) + +#define PCA9532_INPUT0 0x00 +#define PCA9532_INPUT1 0x01 +#define PCA9532_PSC0 0x02 +#define PCA9532_PWM0 0x03 +#define PCA9532_PSC1 0x04 +#define PCA9532_PWM1 0x05 +#define PCA9532_LS0 0x06 +#define PCA9532_LS1 0x07 +#define PCA9532_LS2 0x08 +#define PCA9532_LS3 0x09 + +#define PCA9532_AUTO_INC 0x10 + + +/* + * The Keys on the base board are mapped to LED0 -> LED3 on + * the PCA9532. + */ + +#define KEY1 0x0001 +#define KEY2 0x0002 +#define KEY3 0x0004 +#define KEY4 0x0008 + +#define KEY_MASK 0x000F + +/* + * MMC Card Detect and MMC Write Protect are mapped to LED4 + * and LED5 on the PCA9532. Please note that WP is active low. + */ + +#define MMC_CD 0x0010 +#define MMC_WP 0x0020 + +#define MMC_MASK 0x30 + +/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ +#define PCA9532_NOT_USED 0xC0 + +/* + * Below are the LED constants to use when enabling/disabling a LED. + * The LED names are the names printed on the base board and not + * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, + * base_LED2 -> LED9, and so on. + */ + +#define LED1 0x0100 +#define LED2 0x0200 +#define LED3 0x0400 +#define LED4 0x0800 +#define LED5 0x1000 +#define LED6 0x2000 +#define LED7 0x4000 +#define LED8 0x8000 + +#define LED_MASK 0xFF00 + +void pca9532_init (void); +uint16_t pca9532_getLedState (uint32_t shadow); +void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); +void pca9532_setBlink0Period(uint8_t period); +void pca9532_setBlink0Duty(uint8_t duty); +void pca9532_setBlink0Leds(uint16_t ledMask); +void pca9532_setBlink1Period(uint8_t period); +void pca9532_setBlink1Duty(uint8_t duty); +void pca9532_setBlink1Leds(uint16_t ledMask); + +#endif /* end __PCA9532C_H */ +/**************************************************************************** +** End Of File +*****************************************************************************/ diff --git a/tinyusb/hw/bsp/esp32s2/boards/CMakeLists.txt b/tinyusb/hw/bsp/esp32s2/boards/CMakeLists.txt new file mode 100755 index 00000000..71753012 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/CMakeLists.txt @@ -0,0 +1,14 @@ +idf_component_register(SRCS esp32s2.c + INCLUDE_DIRS "." "${BOARD}" + PRIV_REQUIRES "driver" + REQUIRES freertos src led_strip) + +# Apply board specific content +include("${BOARD}/board.cmake") + +idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) +target_include_directories(${COMPONENT_TARGET} PUBLIC + "${FREERTOS_ORIG_INCLUDE_PATH}" + "${TOP}/hw" + "${TOP}/src" +) diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake new file mode 100755 index 00000000..d3396267 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake @@ -0,0 +1,17 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +idf_build_get_property(idf_target IDF_TARGET) + +message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") + +if(NOT ${idf_target} STREQUAL "esp32s2") + message(FATAL_ERROR "Incorrect target for board ${BOARD}: $ENV{IDF_TARGET}(${idf_target}), try to clean the build first." ) +endif() + +set(IDF_TARGET "esp32s2" FORCE) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h b/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h new file mode 100755 index 00000000..43e00901 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 33 +#define NEOPIXEL_POWER_PIN 21 +#define NEOPIXEL_POWER_STATE 1 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake new file mode 100755 index 00000000..d3396267 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake @@ -0,0 +1,17 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +idf_build_get_property(idf_target IDF_TARGET) + +message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") + +if(NOT ${idf_target} STREQUAL "esp32s2") + message(FATAL_ERROR "Incorrect target for board ${BOARD}: $ENV{IDF_TARGET}(${idf_target}), try to clean the build first." ) +endif() + +set(IDF_TARGET "esp32s2" FORCE) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h b/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h new file mode 100755 index 00000000..16e30b68 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 1 +#define NEOPIXEL_POWER_PIN 21 +#define NEOPIXEL_POWER_STATE 0 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake new file mode 100755 index 00000000..d5c17b9b --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake @@ -0,0 +1,17 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +idf_build_get_property(idf_target IDF_TARGET) + +message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") + +if(NOT ${idf_target} STREQUAL "esp32s2") + message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) +endif() + +set(IDF_TARGET "esp32s2" FORCE) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h b/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h new file mode 100755 index 00000000..49a2474b --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h @@ -0,0 +1,43 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 45 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/esp32s2.c b/tinyusb/hw/bsp/esp32s2/boards/esp32s2.c new file mode 100755 index 00000000..358c0c80 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/esp32s2.c @@ -0,0 +1,143 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../../board.h" +#include "board.h" + +#include "esp_rom_gpio.h" +#include "hal/gpio_ll.h" +#include "hal/usb_hal.h" +#include "soc/usb_periph.h" + +#include "driver/periph_ctrl.h" +#include "driver/rmt.h" + +#ifdef NEOPIXEL_PIN +#include "led_strip.h" +static led_strip_t *strip; +#endif + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +static void configure_pins(usb_hal_context_t *usb); + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) +{ + +#ifdef NEOPIXEL_PIN + #ifdef NEOPIXEL_POWER_PIN + gpio_reset_pin(NEOPIXEL_POWER_PIN); + gpio_set_direction(NEOPIXEL_POWER_PIN, GPIO_MODE_OUTPUT); + gpio_set_level(NEOPIXEL_POWER_PIN, NEOPIXEL_POWER_STATE); + #endif + + // WS2812 Neopixel driver with RMT peripheral + rmt_config_t config = RMT_DEFAULT_CONFIG_TX(NEOPIXEL_PIN, RMT_CHANNEL_0); + config.clk_div = 2; // set counter clock to 40MHz + + rmt_config(&config); + rmt_driver_install(config.channel, 0, 0); + + led_strip_config_t strip_config = LED_STRIP_DEFAULT_CONFIG(1, (led_strip_dev_t) config.channel); + strip = led_strip_new_rmt_ws2812(&strip_config); + strip->clear(strip, 100); // off led +#endif + + // Button + gpio_pad_select_gpio(BUTTON_PIN); + gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); + gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); + + // USB Controller Hal init + periph_module_reset(PERIPH_USB_MODULE); + periph_module_enable(PERIPH_USB_MODULE); + + usb_hal_context_t hal = { + .use_external_phy = false // use built-in PHY + }; + usb_hal_init(&hal); + configure_pins(&hal); +} + +static void configure_pins(usb_hal_context_t *usb) +{ + /* usb_periph_iopins currently configures USB_OTG as USB Device. + * Introduce additional parameters in usb_hal_context_t when adding support + * for USB Host. + */ + for (const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin) { + if ((usb->use_external_phy) || (iopin->ext_phy_only == 0)) { + esp_rom_gpio_pad_select_gpio(iopin->pin); + if (iopin->is_output) { + esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false); + } else { + esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false); + if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) { + gpio_ll_input_enable(&GPIO, iopin->pin); + } + } + esp_rom_gpio_pad_unhold(iopin->pin); + } + } + if (!usb->use_external_phy) { + gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3); + gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); + } +} + +// Turn LED on or off +void board_led_write(bool state) +{ +#ifdef NEOPIXEL_PIN + strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00); + strip->refresh(strip, 100); +#endif +} + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void) +{ + return gpio_get_level(BUTTON_PIN) == BUTTON_STATE_ACTIVE; +} + +// Get characters from UART +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +// Send characters to UART +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake new file mode 100755 index 00000000..d5c17b9b --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake @@ -0,0 +1,17 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +idf_build_get_property(idf_target IDF_TARGET) + +message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") + +if(NOT ${idf_target} STREQUAL "esp32s2") + message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) +endif() + +set(IDF_TARGET "esp32s2" FORCE) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h b/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h new file mode 100755 index 00000000..6bb44f76 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h @@ -0,0 +1,44 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Note: need to insert jumper next to WS2812 pixel +#define NEOPIXEL_PIN 45 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake new file mode 100755 index 00000000..d5c17b9b --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake @@ -0,0 +1,17 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +idf_build_get_property(idf_target IDF_TARGET) + +message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") + +if(NOT ${idf_target} STREQUAL "esp32s2") + message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) +endif() + +set(IDF_TARGET "esp32s2" FORCE) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.h b/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.h new file mode 100755 index 00000000..f450b9a8 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Note: On the production version (v1.2) WS2812 is connected to GPIO 18, +// however earlier revision v1.1 WS2812 is connected to GPIO 17 +#define NEOPIXEL_PIN 18 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt b/tinyusb/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt new file mode 100755 index 00000000..6d0fcbc8 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt @@ -0,0 +1,8 @@ +set(component_srcs "src/led_strip_rmt_ws2812.c") + +idf_component_register(SRCS "${component_srcs}" + INCLUDE_DIRS "include" + PRIV_INCLUDE_DIRS "" + PRIV_REQUIRES "driver" + REQUIRES "") + diff --git a/tinyusb/hw/bsp/esp32s2/components/led_strip/include/led_strip.h b/tinyusb/hw/bsp/esp32s2/components/led_strip/include/led_strip.h new file mode 100755 index 00000000..a9dffc32 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/components/led_strip/include/led_strip.h @@ -0,0 +1,126 @@ +// Copyright 2019 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif + +#include "esp_err.h" + +/** +* @brief LED Strip Type +* +*/ +typedef struct led_strip_s led_strip_t; + +/** +* @brief LED Strip Device Type +* +*/ +typedef void *led_strip_dev_t; + +/** +* @brief Declare of LED Strip Type +* +*/ +struct led_strip_s { + /** + * @brief Set RGB for a specific pixel + * + * @param strip: LED strip + * @param index: index of pixel to set + * @param red: red part of color + * @param green: green part of color + * @param blue: blue part of color + * + * @return + * - ESP_OK: Set RGB for a specific pixel successfully + * - ESP_ERR_INVALID_ARG: Set RGB for a specific pixel failed because of invalid parameters + * - ESP_FAIL: Set RGB for a specific pixel failed because other error occurred + */ + esp_err_t (*set_pixel)(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue); + + /** + * @brief Refresh memory colors to LEDs + * + * @param strip: LED strip + * @param timeout_ms: timeout value for refreshing task + * + * @return + * - ESP_OK: Refresh successfully + * - ESP_ERR_TIMEOUT: Refresh failed because of timeout + * - ESP_FAIL: Refresh failed because some other error occurred + * + * @note: + * After updating the LED colors in the memory, a following invocation of this API is needed to flush colors to strip. + */ + esp_err_t (*refresh)(led_strip_t *strip, uint32_t timeout_ms); + + /** + * @brief Clear LED strip (turn off all LEDs) + * + * @param strip: LED strip + * @param timeout_ms: timeout value for clearing task + * + * @return + * - ESP_OK: Clear LEDs successfully + * - ESP_ERR_TIMEOUT: Clear LEDs failed because of timeout + * - ESP_FAIL: Clear LEDs failed because some other error occurred + */ + esp_err_t (*clear)(led_strip_t *strip, uint32_t timeout_ms); + + /** + * @brief Free LED strip resources + * + * @param strip: LED strip + * + * @return + * - ESP_OK: Free resources successfully + * - ESP_FAIL: Free resources failed because error occurred + */ + esp_err_t (*del)(led_strip_t *strip); +}; + +/** +* @brief LED Strip Configuration Type +* +*/ +typedef struct { + uint32_t max_leds; /*!< Maximum LEDs in a single strip */ + led_strip_dev_t dev; /*!< LED strip device (e.g. RMT channel, PWM channel, etc) */ +} led_strip_config_t; + +/** + * @brief Default configuration for LED strip + * + */ +#define LED_STRIP_DEFAULT_CONFIG(number, dev_hdl) \ + { \ + .max_leds = number, \ + .dev = dev_hdl, \ + } + +/** +* @brief Install a new ws2812 driver (based on RMT peripheral) +* +* @param config: LED strip configuration +* @return +* LED strip instance or NULL +*/ +led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config); + +#ifdef __cplusplus +} +#endif diff --git a/tinyusb/hw/bsp/esp32s2/components/led_strip/src/led_strip_rmt_ws2812.c b/tinyusb/hw/bsp/esp32s2/components/led_strip/src/led_strip_rmt_ws2812.c new file mode 100755 index 00000000..025d3c59 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/components/led_strip/src/led_strip_rmt_ws2812.c @@ -0,0 +1,171 @@ +// Copyright 2019 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#include <stdlib.h> +#include <string.h> +#include <sys/cdefs.h> +#include "esp_log.h" +#include "esp_attr.h" +#include "led_strip.h" +#include "driver/rmt.h" + +static const char *TAG = "ws2812"; +#define STRIP_CHECK(a, str, goto_tag, ret_value, ...) \ + do \ + { \ + if (!(a)) \ + { \ + ESP_LOGE(TAG, "%s(%d): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ + ret = ret_value; \ + goto goto_tag; \ + } \ + } while (0) + +#define WS2812_T0H_NS (350) +#define WS2812_T0L_NS (1000) +#define WS2812_T1H_NS (1000) +#define WS2812_T1L_NS (350) +#define WS2812_RESET_US (280) + +static uint32_t ws2812_t0h_ticks = 0; +static uint32_t ws2812_t1h_ticks = 0; +static uint32_t ws2812_t0l_ticks = 0; +static uint32_t ws2812_t1l_ticks = 0; + +typedef struct { + led_strip_t parent; + rmt_channel_t rmt_channel; + uint32_t strip_len; + uint8_t buffer[0]; +} ws2812_t; + +/** + * @brief Conver RGB data to RMT format. + * + * @note For WS2812, R,G,B each contains 256 different choices (i.e. uint8_t) + * + * @param[in] src: source data, to converted to RMT format + * @param[in] dest: place where to store the convert result + * @param[in] src_size: size of source data + * @param[in] wanted_num: number of RMT items that want to get + * @param[out] translated_size: number of source data that got converted + * @param[out] item_num: number of RMT items which are converted from source data + */ +static void IRAM_ATTR ws2812_rmt_adapter(const void *src, rmt_item32_t *dest, size_t src_size, + size_t wanted_num, size_t *translated_size, size_t *item_num) +{ + if (src == NULL || dest == NULL) { + *translated_size = 0; + *item_num = 0; + return; + } + const rmt_item32_t bit0 = {{{ ws2812_t0h_ticks, 1, ws2812_t0l_ticks, 0 }}}; //Logical 0 + const rmt_item32_t bit1 = {{{ ws2812_t1h_ticks, 1, ws2812_t1l_ticks, 0 }}}; //Logical 1 + size_t size = 0; + size_t num = 0; + uint8_t *psrc = (uint8_t *)src; + rmt_item32_t *pdest = dest; + while (size < src_size && num < wanted_num) { + for (int i = 0; i < 8; i++) { + // MSB first + if (*psrc & (1 << (7 - i))) { + pdest->val = bit1.val; + } else { + pdest->val = bit0.val; + } + num++; + pdest++; + } + size++; + psrc++; + } + *translated_size = size; + *item_num = num; +} + +static esp_err_t ws2812_set_pixel(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue) +{ + esp_err_t ret = ESP_OK; + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + STRIP_CHECK(index < ws2812->strip_len, "index out of the maximum number of leds", err, ESP_ERR_INVALID_ARG); + uint32_t start = index * 3; + // In thr order of GRB + ws2812->buffer[start + 0] = green & 0xFF; + ws2812->buffer[start + 1] = red & 0xFF; + ws2812->buffer[start + 2] = blue & 0xFF; + return ESP_OK; +err: + return ret; +} + +static esp_err_t ws2812_refresh(led_strip_t *strip, uint32_t timeout_ms) +{ + esp_err_t ret = ESP_OK; + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + STRIP_CHECK(rmt_write_sample(ws2812->rmt_channel, ws2812->buffer, ws2812->strip_len * 3, true) == ESP_OK, + "transmit RMT samples failed", err, ESP_FAIL); + return rmt_wait_tx_done(ws2812->rmt_channel, pdMS_TO_TICKS(timeout_ms)); +err: + return ret; +} + +static esp_err_t ws2812_clear(led_strip_t *strip, uint32_t timeout_ms) +{ + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + // Write zero to turn off all leds + memset(ws2812->buffer, 0, ws2812->strip_len * 3); + return ws2812_refresh(strip, timeout_ms); +} + +static esp_err_t ws2812_del(led_strip_t *strip) +{ + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + free(ws2812); + return ESP_OK; +} + +led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config) +{ + led_strip_t *ret = NULL; + STRIP_CHECK(config, "configuration can't be null", err, NULL); + + // 24 bits per led + uint32_t ws2812_size = sizeof(ws2812_t) + config->max_leds * 3; + ws2812_t *ws2812 = calloc(1, ws2812_size); + STRIP_CHECK(ws2812, "request memory for ws2812 failed", err, NULL); + + uint32_t counter_clk_hz = 0; + STRIP_CHECK(rmt_get_counter_clock((rmt_channel_t)config->dev, &counter_clk_hz) == ESP_OK, + "get rmt counter clock failed", err, NULL); + // ns -> ticks + float ratio = (float)counter_clk_hz / 1e9; + ws2812_t0h_ticks = (uint32_t)(ratio * WS2812_T0H_NS); + ws2812_t0l_ticks = (uint32_t)(ratio * WS2812_T0L_NS); + ws2812_t1h_ticks = (uint32_t)(ratio * WS2812_T1H_NS); + ws2812_t1l_ticks = (uint32_t)(ratio * WS2812_T1L_NS); + + // set ws2812 to rmt adapter + rmt_translator_init((rmt_channel_t)config->dev, ws2812_rmt_adapter); + + ws2812->rmt_channel = (rmt_channel_t)config->dev; + ws2812->strip_len = config->max_leds; + + ws2812->parent.set_pixel = ws2812_set_pixel; + ws2812->parent.refresh = ws2812_refresh; + ws2812->parent.clear = ws2812_clear; + ws2812->parent.del = ws2812_del; + + return &ws2812->parent; +err: + return ret; +} diff --git a/tinyusb/hw/bsp/esp32s2/family.cmake b/tinyusb/hw/bsp/esp32s2/family.cmake new file mode 100755 index 00000000..f3d41d04 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/family.cmake @@ -0,0 +1,7 @@ +cmake_minimum_required(VERSION 3.5) + +# Add example src and bsp directories +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") +include($ENV{IDF_PATH}/tools/cmake/project.cmake) +set(SUPPORTED_TARGETS esp32s2) +set(FAMILY_MCUS ESP32S2) diff --git a/tinyusb/hw/bsp/esp32s2/family.mk b/tinyusb/hw/bsp/esp32s2/family.mk new file mode 100755 index 00000000..fb9b2164 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s2/family.mk @@ -0,0 +1,26 @@ +#DEPS_SUBMODULES += + +.PHONY: all clean flash bootloader-flash app-flash erase monitor dfu-flash dfu + +all: + idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) -DIDF_TARGET=esp32s2 build + +build: all + +clean: + idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) clean + +fullclean: + if test -f sdkconfig; then $(RM) -f sdkconfig ; fi + if test -d $(BUILD); then $(RM) -rf $(BUILD) ; fi + +flash bootloader-flash app-flash erase monitor dfu-flash dfu: + idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ + +uf2: $(BUILD)/$(PROJECT).uf2 + +UF2_FAMILY_ID = 0xbfdd4eee +$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin + @echo CREATE $@ + $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ + diff --git a/tinyusb/hw/bsp/esp32s3/boards/CMakeLists.txt b/tinyusb/hw/bsp/esp32s3/boards/CMakeLists.txt new file mode 100755 index 00000000..e1b921ae --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/boards/CMakeLists.txt @@ -0,0 +1,14 @@ +idf_component_register(SRCS esp32s3.c + INCLUDE_DIRS "." "${BOARD}" + PRIV_REQUIRES "driver" + REQUIRES freertos src led_strip) + +# Apply board specific content +include("${BOARD}/board.cmake") + +idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) +target_include_directories(${COMPONENT_TARGET} PUBLIC + "${FREERTOS_ORIG_INCLUDE_PATH}" + "${TOP}/hw" + "${TOP}/src" +) diff --git a/tinyusb/hw/bsp/esp32s3/boards/esp32s3.c b/tinyusb/hw/bsp/esp32s3/boards/esp32s3.c new file mode 100755 index 00000000..358c0c80 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/boards/esp32s3.c @@ -0,0 +1,143 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../../board.h" +#include "board.h" + +#include "esp_rom_gpio.h" +#include "hal/gpio_ll.h" +#include "hal/usb_hal.h" +#include "soc/usb_periph.h" + +#include "driver/periph_ctrl.h" +#include "driver/rmt.h" + +#ifdef NEOPIXEL_PIN +#include "led_strip.h" +static led_strip_t *strip; +#endif + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +static void configure_pins(usb_hal_context_t *usb); + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) +{ + +#ifdef NEOPIXEL_PIN + #ifdef NEOPIXEL_POWER_PIN + gpio_reset_pin(NEOPIXEL_POWER_PIN); + gpio_set_direction(NEOPIXEL_POWER_PIN, GPIO_MODE_OUTPUT); + gpio_set_level(NEOPIXEL_POWER_PIN, NEOPIXEL_POWER_STATE); + #endif + + // WS2812 Neopixel driver with RMT peripheral + rmt_config_t config = RMT_DEFAULT_CONFIG_TX(NEOPIXEL_PIN, RMT_CHANNEL_0); + config.clk_div = 2; // set counter clock to 40MHz + + rmt_config(&config); + rmt_driver_install(config.channel, 0, 0); + + led_strip_config_t strip_config = LED_STRIP_DEFAULT_CONFIG(1, (led_strip_dev_t) config.channel); + strip = led_strip_new_rmt_ws2812(&strip_config); + strip->clear(strip, 100); // off led +#endif + + // Button + gpio_pad_select_gpio(BUTTON_PIN); + gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); + gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); + + // USB Controller Hal init + periph_module_reset(PERIPH_USB_MODULE); + periph_module_enable(PERIPH_USB_MODULE); + + usb_hal_context_t hal = { + .use_external_phy = false // use built-in PHY + }; + usb_hal_init(&hal); + configure_pins(&hal); +} + +static void configure_pins(usb_hal_context_t *usb) +{ + /* usb_periph_iopins currently configures USB_OTG as USB Device. + * Introduce additional parameters in usb_hal_context_t when adding support + * for USB Host. + */ + for (const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin) { + if ((usb->use_external_phy) || (iopin->ext_phy_only == 0)) { + esp_rom_gpio_pad_select_gpio(iopin->pin); + if (iopin->is_output) { + esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false); + } else { + esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false); + if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) { + gpio_ll_input_enable(&GPIO, iopin->pin); + } + } + esp_rom_gpio_pad_unhold(iopin->pin); + } + } + if (!usb->use_external_phy) { + gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3); + gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); + } +} + +// Turn LED on or off +void board_led_write(bool state) +{ +#ifdef NEOPIXEL_PIN + strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00); + strip->refresh(strip, 100); +#endif +} + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void) +{ + return gpio_get_level(BUTTON_PIN) == BUTTON_STATE_ACTIVE; +} + +// Get characters from UART +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +// Send characters to UART +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + diff --git a/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake b/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake new file mode 100755 index 00000000..60f7d19c --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake @@ -0,0 +1,17 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +idf_build_get_property(idf_target IDF_TARGET) + +message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") + +if(NOT ${idf_target} STREQUAL "esp32s3") + message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) +endif() + +set(IDF_TARGET "esp32s3" FORCE) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.h b/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.h new file mode 100755 index 00000000..fff24ba4 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.h @@ -0,0 +1,44 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Note: On the production version (v1.1) WS2812 is connected to GPIO 47 +#define NEOPIXEL_PIN 47 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt b/tinyusb/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt new file mode 100755 index 00000000..6d0fcbc8 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt @@ -0,0 +1,8 @@ +set(component_srcs "src/led_strip_rmt_ws2812.c") + +idf_component_register(SRCS "${component_srcs}" + INCLUDE_DIRS "include" + PRIV_INCLUDE_DIRS "" + PRIV_REQUIRES "driver" + REQUIRES "") + diff --git a/tinyusb/hw/bsp/esp32s3/components/led_strip/include/led_strip.h b/tinyusb/hw/bsp/esp32s3/components/led_strip/include/led_strip.h new file mode 100755 index 00000000..a9dffc32 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/components/led_strip/include/led_strip.h @@ -0,0 +1,126 @@ +// Copyright 2019 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif + +#include "esp_err.h" + +/** +* @brief LED Strip Type +* +*/ +typedef struct led_strip_s led_strip_t; + +/** +* @brief LED Strip Device Type +* +*/ +typedef void *led_strip_dev_t; + +/** +* @brief Declare of LED Strip Type +* +*/ +struct led_strip_s { + /** + * @brief Set RGB for a specific pixel + * + * @param strip: LED strip + * @param index: index of pixel to set + * @param red: red part of color + * @param green: green part of color + * @param blue: blue part of color + * + * @return + * - ESP_OK: Set RGB for a specific pixel successfully + * - ESP_ERR_INVALID_ARG: Set RGB for a specific pixel failed because of invalid parameters + * - ESP_FAIL: Set RGB for a specific pixel failed because other error occurred + */ + esp_err_t (*set_pixel)(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue); + + /** + * @brief Refresh memory colors to LEDs + * + * @param strip: LED strip + * @param timeout_ms: timeout value for refreshing task + * + * @return + * - ESP_OK: Refresh successfully + * - ESP_ERR_TIMEOUT: Refresh failed because of timeout + * - ESP_FAIL: Refresh failed because some other error occurred + * + * @note: + * After updating the LED colors in the memory, a following invocation of this API is needed to flush colors to strip. + */ + esp_err_t (*refresh)(led_strip_t *strip, uint32_t timeout_ms); + + /** + * @brief Clear LED strip (turn off all LEDs) + * + * @param strip: LED strip + * @param timeout_ms: timeout value for clearing task + * + * @return + * - ESP_OK: Clear LEDs successfully + * - ESP_ERR_TIMEOUT: Clear LEDs failed because of timeout + * - ESP_FAIL: Clear LEDs failed because some other error occurred + */ + esp_err_t (*clear)(led_strip_t *strip, uint32_t timeout_ms); + + /** + * @brief Free LED strip resources + * + * @param strip: LED strip + * + * @return + * - ESP_OK: Free resources successfully + * - ESP_FAIL: Free resources failed because error occurred + */ + esp_err_t (*del)(led_strip_t *strip); +}; + +/** +* @brief LED Strip Configuration Type +* +*/ +typedef struct { + uint32_t max_leds; /*!< Maximum LEDs in a single strip */ + led_strip_dev_t dev; /*!< LED strip device (e.g. RMT channel, PWM channel, etc) */ +} led_strip_config_t; + +/** + * @brief Default configuration for LED strip + * + */ +#define LED_STRIP_DEFAULT_CONFIG(number, dev_hdl) \ + { \ + .max_leds = number, \ + .dev = dev_hdl, \ + } + +/** +* @brief Install a new ws2812 driver (based on RMT peripheral) +* +* @param config: LED strip configuration +* @return +* LED strip instance or NULL +*/ +led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config); + +#ifdef __cplusplus +} +#endif diff --git a/tinyusb/hw/bsp/esp32s3/components/led_strip/src/led_strip_rmt_ws2812.c b/tinyusb/hw/bsp/esp32s3/components/led_strip/src/led_strip_rmt_ws2812.c new file mode 100755 index 00000000..025d3c59 --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/components/led_strip/src/led_strip_rmt_ws2812.c @@ -0,0 +1,171 @@ +// Copyright 2019 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#include <stdlib.h> +#include <string.h> +#include <sys/cdefs.h> +#include "esp_log.h" +#include "esp_attr.h" +#include "led_strip.h" +#include "driver/rmt.h" + +static const char *TAG = "ws2812"; +#define STRIP_CHECK(a, str, goto_tag, ret_value, ...) \ + do \ + { \ + if (!(a)) \ + { \ + ESP_LOGE(TAG, "%s(%d): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ + ret = ret_value; \ + goto goto_tag; \ + } \ + } while (0) + +#define WS2812_T0H_NS (350) +#define WS2812_T0L_NS (1000) +#define WS2812_T1H_NS (1000) +#define WS2812_T1L_NS (350) +#define WS2812_RESET_US (280) + +static uint32_t ws2812_t0h_ticks = 0; +static uint32_t ws2812_t1h_ticks = 0; +static uint32_t ws2812_t0l_ticks = 0; +static uint32_t ws2812_t1l_ticks = 0; + +typedef struct { + led_strip_t parent; + rmt_channel_t rmt_channel; + uint32_t strip_len; + uint8_t buffer[0]; +} ws2812_t; + +/** + * @brief Conver RGB data to RMT format. + * + * @note For WS2812, R,G,B each contains 256 different choices (i.e. uint8_t) + * + * @param[in] src: source data, to converted to RMT format + * @param[in] dest: place where to store the convert result + * @param[in] src_size: size of source data + * @param[in] wanted_num: number of RMT items that want to get + * @param[out] translated_size: number of source data that got converted + * @param[out] item_num: number of RMT items which are converted from source data + */ +static void IRAM_ATTR ws2812_rmt_adapter(const void *src, rmt_item32_t *dest, size_t src_size, + size_t wanted_num, size_t *translated_size, size_t *item_num) +{ + if (src == NULL || dest == NULL) { + *translated_size = 0; + *item_num = 0; + return; + } + const rmt_item32_t bit0 = {{{ ws2812_t0h_ticks, 1, ws2812_t0l_ticks, 0 }}}; //Logical 0 + const rmt_item32_t bit1 = {{{ ws2812_t1h_ticks, 1, ws2812_t1l_ticks, 0 }}}; //Logical 1 + size_t size = 0; + size_t num = 0; + uint8_t *psrc = (uint8_t *)src; + rmt_item32_t *pdest = dest; + while (size < src_size && num < wanted_num) { + for (int i = 0; i < 8; i++) { + // MSB first + if (*psrc & (1 << (7 - i))) { + pdest->val = bit1.val; + } else { + pdest->val = bit0.val; + } + num++; + pdest++; + } + size++; + psrc++; + } + *translated_size = size; + *item_num = num; +} + +static esp_err_t ws2812_set_pixel(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue) +{ + esp_err_t ret = ESP_OK; + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + STRIP_CHECK(index < ws2812->strip_len, "index out of the maximum number of leds", err, ESP_ERR_INVALID_ARG); + uint32_t start = index * 3; + // In thr order of GRB + ws2812->buffer[start + 0] = green & 0xFF; + ws2812->buffer[start + 1] = red & 0xFF; + ws2812->buffer[start + 2] = blue & 0xFF; + return ESP_OK; +err: + return ret; +} + +static esp_err_t ws2812_refresh(led_strip_t *strip, uint32_t timeout_ms) +{ + esp_err_t ret = ESP_OK; + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + STRIP_CHECK(rmt_write_sample(ws2812->rmt_channel, ws2812->buffer, ws2812->strip_len * 3, true) == ESP_OK, + "transmit RMT samples failed", err, ESP_FAIL); + return rmt_wait_tx_done(ws2812->rmt_channel, pdMS_TO_TICKS(timeout_ms)); +err: + return ret; +} + +static esp_err_t ws2812_clear(led_strip_t *strip, uint32_t timeout_ms) +{ + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + // Write zero to turn off all leds + memset(ws2812->buffer, 0, ws2812->strip_len * 3); + return ws2812_refresh(strip, timeout_ms); +} + +static esp_err_t ws2812_del(led_strip_t *strip) +{ + ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); + free(ws2812); + return ESP_OK; +} + +led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config) +{ + led_strip_t *ret = NULL; + STRIP_CHECK(config, "configuration can't be null", err, NULL); + + // 24 bits per led + uint32_t ws2812_size = sizeof(ws2812_t) + config->max_leds * 3; + ws2812_t *ws2812 = calloc(1, ws2812_size); + STRIP_CHECK(ws2812, "request memory for ws2812 failed", err, NULL); + + uint32_t counter_clk_hz = 0; + STRIP_CHECK(rmt_get_counter_clock((rmt_channel_t)config->dev, &counter_clk_hz) == ESP_OK, + "get rmt counter clock failed", err, NULL); + // ns -> ticks + float ratio = (float)counter_clk_hz / 1e9; + ws2812_t0h_ticks = (uint32_t)(ratio * WS2812_T0H_NS); + ws2812_t0l_ticks = (uint32_t)(ratio * WS2812_T0L_NS); + ws2812_t1h_ticks = (uint32_t)(ratio * WS2812_T1H_NS); + ws2812_t1l_ticks = (uint32_t)(ratio * WS2812_T1L_NS); + + // set ws2812 to rmt adapter + rmt_translator_init((rmt_channel_t)config->dev, ws2812_rmt_adapter); + + ws2812->rmt_channel = (rmt_channel_t)config->dev; + ws2812->strip_len = config->max_leds; + + ws2812->parent.set_pixel = ws2812_set_pixel; + ws2812->parent.refresh = ws2812_refresh; + ws2812->parent.clear = ws2812_clear; + ws2812->parent.del = ws2812_del; + + return &ws2812->parent; +err: + return ret; +} diff --git a/tinyusb/hw/bsp/esp32s3/family.cmake b/tinyusb/hw/bsp/esp32s3/family.cmake new file mode 100755 index 00000000..511dd58b --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/family.cmake @@ -0,0 +1,7 @@ +cmake_minimum_required(VERSION 3.5) + +# Add example src and bsp directories +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") +include($ENV{IDF_PATH}/tools/cmake/project.cmake) +set(SUPPORTED_TARGETS esp32s3) +set(FAMILY_MCUS ESP32S3) diff --git a/tinyusb/hw/bsp/esp32s3/family.mk b/tinyusb/hw/bsp/esp32s3/family.mk new file mode 100755 index 00000000..cf153ffc --- /dev/null +++ b/tinyusb/hw/bsp/esp32s3/family.mk @@ -0,0 +1,26 @@ +#DEPS_SUBMODULES += + +.PHONY: all clean flash bootloader-flash app-flash erase monitor dfu-flash dfu + +all: + idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) -DIDF_TARGET=esp32s3 build + +build: all + +clean: + idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) clean + +fullclean: + if test -f sdkconfig; then $(RM) -f sdkconfig ; fi + if test -d $(BUILD); then $(RM) -rf $(BUILD) ; fi + +flash bootloader-flash app-flash erase monitor dfu-flash dfu: + idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ + +uf2: $(BUILD)/$(PROJECT).uf2 + +UF2_FAMILY_ID = 0xc47e5767 +$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin + @echo CREATE $@ + $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ + diff --git a/tinyusb/hw/bsp/family_support.cmake b/tinyusb/hw/bsp/family_support.cmake new file mode 100755 index 00000000..af0e00b2 --- /dev/null +++ b/tinyusb/hw/bsp/family_support.cmake @@ -0,0 +1,71 @@ +if (NOT TARGET _family_support_marker) + add_library(_family_support_marker INTERFACE) + + if (NOT FAMILY) + message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the camke command line") + endif() + + if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) + message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") + endif() + + function(family_filter RESULT DIR) + get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) + file(GLOB ONLYS "${DIR}/.only.MCU_*") + if (ONLYS) + foreach(MCU IN LISTS FAMILY_MCUS) + if (EXISTS ${DIR}/.only.MCU_${MCU}) + set(${RESULT} 1 PARENT_SCOPE) + return() + endif() + endforeach() + else() + foreach(MCU IN LISTS FAMILY_MCUS) + if (EXISTS ${DIR}/.skip.MCU_${MCU}) + set(${RESULT} 0 PARENT_SCOPE) + return() + endif() + endforeach() + endif() + set(${RESULT} 1 PARENT_SCOPE) + endfunction() + + function(family_add_subdirectory DIR) + family_filter(SHOULD_ADD "${DIR}") + if (SHOULD_ADD) + add_subdirectory(${DIR}) + endif() + endfunction() + + function(family_get_project_name OUTPUT_NAME DIR) + get_filename_component(SHORT_NAME ${DIR} NAME) + set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) + endfunction() + + function(family_initialize_project PROJECT DIR) + family_filter(ALLOWED "${DIR}") + if (NOT ALLOWED) + get_filename_component(SHORT_NAME ${DIR} NAME) + message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") + endif() + endfunction() + + # configure an executable target to link to tinyusb in device mode, and add the board implementation + function(family_configure_device_example TARGET) + # default implentation is empty, the function should be redefined in the FAMILY/family.cmake + endfunction() + + # configure an executable target to link to tinyusb in host mode, and add the board implementation + function(family_configure_host_example TARGET) + # default implentation is empty, the function should be redefined in the FAMILY/family.cmake + endfunction() + + include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) + + if (NOT FAMILY_MCUS) + set(FAMILY_MCUS ${FAMILY}) + endif() + + # save it in case of re-inclusion + set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") +endif()
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/boards/fomu/board.h b/tinyusb/hw/bsp/fomu/boards/fomu/board.h new file mode 100755 index 00000000..666ba1d9 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/boards/fomu/board.h @@ -0,0 +1,40 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Place holder only + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/fomu/boards/fomu/board.mk b/tinyusb/hw/bsp/fomu/boards/fomu/board.mk new file mode 100755 index 00000000..8ced1141 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/boards/fomu/board.mk @@ -0,0 +1 @@ +# place holder
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/crt0-vexriscv.S b/tinyusb/hw/bsp/fomu/crt0-vexriscv.S new file mode 100755 index 00000000..d80a29e0 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/crt0-vexriscv.S @@ -0,0 +1,83 @@ +.global main +.global isr + +.section .text.start +.global _start + +_start: + j crt_init + +.section .text +.global trap_entry +trap_entry: + sw x1, - 1*4(sp) + sw x5, - 2*4(sp) + sw x6, - 3*4(sp) + sw x7, - 4*4(sp) + sw x10, - 5*4(sp) + sw x11, - 6*4(sp) + sw x12, - 7*4(sp) + sw x13, - 8*4(sp) + sw x14, - 9*4(sp) + sw x15, -10*4(sp) + sw x16, -11*4(sp) + sw x17, -12*4(sp) + sw x28, -13*4(sp) + sw x29, -14*4(sp) + sw x30, -15*4(sp) + sw x31, -16*4(sp) + addi sp,sp,-16*4 + call isr + lw x1 , 15*4(sp) + lw x5, 14*4(sp) + lw x6, 13*4(sp) + lw x7, 12*4(sp) + lw x10, 11*4(sp) + lw x11, 10*4(sp) + lw x12, 9*4(sp) + lw x13, 8*4(sp) + lw x14, 7*4(sp) + lw x15, 6*4(sp) + lw x16, 5*4(sp) + lw x17, 4*4(sp) + lw x28, 3*4(sp) + lw x29, 2*4(sp) + lw x30, 1*4(sp) + lw x31, 0*4(sp) + addi sp,sp,16*4 + mret + +.text +crt_init: + la sp, _estack - 4 + la a0, trap_entry + csrw mtvec, a0 + +bss_init: + la a0, _sbss + la a1, _ebss + 4 +bss_loop: + beq a0,a1,bss_done + sw zero,0(a0) + add a0,a0,4 + j bss_loop +bss_done: + + /* Load DATA */ + la t0, _etext + la t1, _srelocate + la t2, _erelocate + 4 +3: + lw t3, 0(t0) + sw t3, 0(t1) + /* _edata is aligned to 4 bytes. Use word-xfers. */ + addi t0, t0, 4 + addi t1, t1, 4 + bltu t1, t2, 3b + + li a0, 0x880 //880 enable timer + external interrupt sources (until mstatus.MIE is set, they will never trigger an interrupt) + csrw mie,a0 + + call main +infinite_loop: + j infinite_loop diff --git a/tinyusb/hw/bsp/fomu/dfu.py b/tinyusb/hw/bsp/fomu/dfu.py new file mode 100755 index 00000000..32479350 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/dfu.py @@ -0,0 +1,95 @@ +#!/usr/bin/python + +# Written by Antonio Galea - 2010/11/18 +# Updated for DFU 1.1 by Sean Cross - 2020/03/31 +# Distributed under Gnu LGPL 3.0 +# see http://www.gnu.org/licenses/lgpl-3.0.txt + +import sys,struct,zlib,os +from optparse import OptionParser + +DEFAULT_DEVICE="0x1209:0x5bf0" + +def named(tuple,names): + return dict(zip(names.split(),tuple)) +def consume(fmt,data,names): + n = struct.calcsize(fmt) + return named(struct.unpack(fmt,data[:n]),names),data[n:] +def cstring(string): + return string.split('\0',1)[0] +def compute_crc(data): + return 0xFFFFFFFF & -zlib.crc32(data) -1 + +def parse(file,dump_images=False): + print ('File: "%s"' % file) + data = open(file,'rb').read() + crc = compute_crc(data[:-4]) + data = data[len(data)-16:] + suffix = named(struct.unpack('<4H3sBI',data[:16]),'device product vendor dfu ufd len crc') + print ('usb: %(vendor)04x:%(product)04x, device: 0x%(device)04x, dfu: 0x%(dfu)04x, %(ufd)s, %(len)d, 0x%(crc)08x' % suffix) + if crc != suffix['crc']: + print ("CRC ERROR: computed crc32 is 0x%08x" % crc) + data = data[16:] + if data: + print ("PARSE ERROR") + +def build(file,data,device=DEFAULT_DEVICE): + # Parse the VID and PID from the `device` argument + v,d=map(lambda x: int(x,0) & 0xFFFF, device.split(':',1)) + + # Generate the DFU suffix, consisting of these fields: + # Field name | Length | Description + # ================+=========+================================ + # bcdDevice | 2 | The release number of this firmware (0xffff - don't care) + # idProduct | 2 | PID of this device + # idVendor | 2 | VID of this device + # bcdDFU | 2 | Version of this DFU spec (0x01 0x00) + # ucDfuSignature | 3 | The characters 'DFU', printed in reverse order + # bLength | 1 | The length of this suffix (16 bytes) + # dwCRC | 4 | A CRC32 of the data, including this suffix + data += struct.pack('<4H3sB',0xffff,d,v,0x0100,b'UFD',16) + crc = compute_crc(data) + # Append the CRC32 of the entire block + data += struct.pack('<I',crc) + open(file,'wb').write(data) + +if __name__=="__main__": + usage = """ +%prog [-d|--dump] infile.dfu +%prog {-b|--build} file.bin [{-D|--device}=vendor:device] outfile.dfu""" + parser = OptionParser(usage=usage) + parser.add_option("-b", "--build", action="store", dest="binfile", + help="build a DFU file from given BINFILE", metavar="BINFILE") + parser.add_option("-D", "--device", action="store", dest="device", + help="build for DEVICE, defaults to %s" % DEFAULT_DEVICE, metavar="DEVICE") + parser.add_option("-d", "--dump", action="store_true", dest="dump_images", + default=False, help="dump contained images to current directory") + (options, args) = parser.parse_args() + + if options.binfile and len(args)==1: + binfile = options.binfile + if not os.path.isfile(binfile): + print ("Unreadable file '%s'." % binfile) + sys.exit(1) + target = open(binfile,'rb').read() + outfile = args[0] + device = DEFAULT_DEVICE + # If a device is specified, parse the pair into a VID:PID pair + # in order to validate them. + if options.device: + device=options.device + try: + v,d=map(lambda x: int(x,0) & 0xFFFF, device.split(':',1)) + except: + print ("Invalid device '%s'." % device) + sys.exit(1) + build(outfile,target,device) + elif len(args)==1: + infile = args[0] + if not os.path.isfile(infile): + print ("Unreadable file '%s'." % infile) + sys.exit(1) + parse(infile, dump_images=options.dump_images) + else: + parser.print_help() + sys.exit(1) diff --git a/tinyusb/hw/bsp/fomu/family.mk b/tinyusb/hw/bsp/fomu/family.mk new file mode 100755 index 00000000..165535c6 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/family.mk @@ -0,0 +1,30 @@ +CFLAGS += \ + -flto \ + -march=rv32i \ + -mabi=ilp32 \ + -nostdlib \ + -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI + +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack +CROSS_COMPILE = riscv-none-embed- + +# All source paths should be relative to the top level. +LD_FILE = $(FAMILY_PATH)/fomu.ld + +SRC_C += src/portable/valentyusb/eptri/dcd_eptri.c + +SRC_S += $(FAMILY_PATH)/crt0-vexriscv.S + +INC += \ + $(TOP)/$(FAMILY_PATH)/include + +# For freeRTOS port source +FREERTOS_PORT = RISC-V + +# flash using dfu-util +$(BUILD)/$(PROJECT).dfu: $(BUILD)/$(PROJECT).bin + @echo "Create $@" + python $(TOP)/hw/bsp/$(BOARD)/dfu.py -b $^ -D 0x1209:0x5bf0 $@ + +flash: $(BUILD)/$(PROJECT).dfu + dfu-util -D $^ diff --git a/tinyusb/hw/bsp/fomu/fomu.c b/tinyusb/hw/bsp/fomu/fomu.c new file mode 100755 index 00000000..25e5e961 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/fomu.c @@ -0,0 +1,115 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <stdint.h> +#include <stdbool.h> +#include "../board.h" +#include "csr.h" +#include "irq.h" + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void fomu_error(uint32_t line) +{ + (void)line; + TU_BREAKPOINT(); +} + +volatile uint32_t system_ticks = 0; +static void timer_init(void) +{ + int t; + + timer0_en_write(0); + t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick + timer0_reload_write(t); + timer0_load_write(t); + timer0_en_write(1); + timer0_ev_enable_write(1); + timer0_ev_pending_write(1); + irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); +} + +void isr(void) +{ + unsigned int irqs; + + irqs = irq_pending() & irq_getmask(); + +#if CFG_TUSB_RHPORT0_MODE == OPT_MODE_DEVICE + if (irqs & (1 << USB_INTERRUPT)) { + tud_int_handler(0); + } +#endif + if (irqs & (1 << TIMER0_INTERRUPT)) { + system_ticks++; + timer0_ev_pending_write(1); + } +} + +void board_init(void) +{ + irq_setmask(0); + irq_setie(1); + timer_init(); + return; +} + +void board_led_write(bool state) +{ + rgb_ctrl_write(0xff); + rgb_raw_write(state); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + int32_t offset = 0; + for (offset = 0; offset < len; offset++) + if (! (messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) + messible_in_write(((uint8_t *)buf)[offset]); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/fomu/fomu.ld b/tinyusb/hw/bsp/fomu/fomu.ld new file mode 100755 index 00000000..13278d2a --- /dev/null +++ b/tinyusb/hw/bsp/fomu/fomu.ld @@ -0,0 +1,104 @@ +OUTPUT_FORMAT("elf32-littleriscv") +ENTRY(_start) + +__DYNAMIC = 0; + +MEMORY { + csr : ORIGIN = 0x60000000, LENGTH = 0x01000000 + vexriscv_debug : ORIGIN = 0xf00f0000, LENGTH = 0x00000100 + ram : ORIGIN = 0x10000000, LENGTH = 0x00020000 + rom : ORIGIN = 0x20040000, LENGTH = 0x00200000 - 0x40000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _ftext = .; + *(.text.start) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + } > rom + + . = ALIGN(4); + _etext = .; /* End of text section */ + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(.sbss .sbss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/fomu/include/csr.h b/tinyusb/hw/bsp/fomu/include/csr.h new file mode 100755 index 00000000..a2f60ecf --- /dev/null +++ b/tinyusb/hw/bsp/fomu/include/csr.h @@ -0,0 +1,750 @@ +//-------------------------------------------------------------------------------- +// Auto-generated by Migen (f4fcd10) & LiteX (1425a68d) on 2019-11-12 19:41:49 +//-------------------------------------------------------------------------------- +#ifndef __GENERATED_CSR_H +#define __GENERATED_CSR_H +#include <stdint.h> +#ifdef CSR_ACCESSORS_DEFINED +extern void csr_writeb(uint8_t value, unsigned long addr); +extern uint8_t csr_readb(unsigned long addr); +extern void csr_writew(uint16_t value, unsigned long addr); +extern uint16_t csr_readw(unsigned long addr); +extern void csr_writel(uint32_t value, unsigned long addr); +extern uint32_t csr_readl(unsigned long addr); +#else /* ! CSR_ACCESSORS_DEFINED */ +#include <hw/common.h> +#endif /* ! CSR_ACCESSORS_DEFINED */ + +/* ctrl */ +#define CSR_CTRL_BASE 0xe0000000L +#define CSR_CTRL_RESET_ADDR 0xe0000000L +#define CSR_CTRL_RESET_SIZE 1 +static inline unsigned char ctrl_reset_read(void) { + unsigned char r = csr_readl(0xe0000000L); + return r; +} +static inline void ctrl_reset_write(unsigned char value) { + csr_writel(value, 0xe0000000L); +} +#define CSR_CTRL_SCRATCH_ADDR 0xe0000004L +#define CSR_CTRL_SCRATCH_SIZE 4 +static inline unsigned int ctrl_scratch_read(void) { + unsigned int r = csr_readl(0xe0000004L); + r <<= 8; + r |= csr_readl(0xe0000008L); + r <<= 8; + r |= csr_readl(0xe000000cL); + r <<= 8; + r |= csr_readl(0xe0000010L); + return r; +} +static inline void ctrl_scratch_write(unsigned int value) { + csr_writel(value >> 24, 0xe0000004L); + csr_writel(value >> 16, 0xe0000008L); + csr_writel(value >> 8, 0xe000000cL); + csr_writel(value, 0xe0000010L); +} +#define CSR_CTRL_BUS_ERRORS_ADDR 0xe0000014L +#define CSR_CTRL_BUS_ERRORS_SIZE 4 +static inline unsigned int ctrl_bus_errors_read(void) { + unsigned int r = csr_readl(0xe0000014L); + r <<= 8; + r |= csr_readl(0xe0000018L); + r <<= 8; + r |= csr_readl(0xe000001cL); + r <<= 8; + r |= csr_readl(0xe0000020L); + return r; +} + +/* messible */ +#define CSR_MESSIBLE_BASE 0xe0008000L +#define CSR_MESSIBLE_IN_ADDR 0xe0008000L +#define CSR_MESSIBLE_IN_SIZE 1 +static inline unsigned char messible_in_read(void) { + unsigned char r = csr_readl(0xe0008000L); + return r; +} +static inline void messible_in_write(unsigned char value) { + csr_writel(value, 0xe0008000L); +} +#define CSR_MESSIBLE_OUT_ADDR 0xe0008004L +#define CSR_MESSIBLE_OUT_SIZE 1 +static inline unsigned char messible_out_read(void) { + unsigned char r = csr_readl(0xe0008004L); + return r; +} +#define CSR_MESSIBLE_STATUS_ADDR 0xe0008008L +#define CSR_MESSIBLE_STATUS_SIZE 1 +static inline unsigned char messible_status_read(void) { + unsigned char r = csr_readl(0xe0008008L); + return r; +} +#define CSR_MESSIBLE_STATUS_FULL_OFFSET 0 +#define CSR_MESSIBLE_STATUS_FULL_SIZE 1 +#define CSR_MESSIBLE_STATUS_HAVE_OFFSET 1 +#define CSR_MESSIBLE_STATUS_HAVE_SIZE 1 + +/* picorvspi */ +#define CSR_PICORVSPI_BASE 0xe0005000L +#define CSR_PICORVSPI_CFG1_ADDR 0xe0005000L +#define CSR_PICORVSPI_CFG1_SIZE 1 +static inline unsigned char picorvspi_cfg1_read(void) { + unsigned char r = csr_readl(0xe0005000L); + return r; +} +static inline void picorvspi_cfg1_write(unsigned char value) { + csr_writel(value, 0xe0005000L); +} +#define CSR_PICORVSPI_CFG1_BB_OUT_OFFSET 0 +#define CSR_PICORVSPI_CFG1_BB_OUT_SIZE 4 +#define CSR_PICORVSPI_CFG1_BB_CLK_OFFSET 4 +#define CSR_PICORVSPI_CFG1_BB_CLK_SIZE 1 +#define CSR_PICORVSPI_CFG1_BB_CS_OFFSET 5 +#define CSR_PICORVSPI_CFG1_BB_CS_SIZE 1 +#define CSR_PICORVSPI_CFG2_ADDR 0xe0005004L +#define CSR_PICORVSPI_CFG2_SIZE 1 +static inline unsigned char picorvspi_cfg2_read(void) { + unsigned char r = csr_readl(0xe0005004L); + return r; +} +static inline void picorvspi_cfg2_write(unsigned char value) { + csr_writel(value, 0xe0005004L); +} +#define CSR_PICORVSPI_CFG2_BB_OE_OFFSET 0 +#define CSR_PICORVSPI_CFG2_BB_OE_SIZE 4 +#define CSR_PICORVSPI_CFG3_ADDR 0xe0005008L +#define CSR_PICORVSPI_CFG3_SIZE 1 +static inline unsigned char picorvspi_cfg3_read(void) { + unsigned char r = csr_readl(0xe0005008L); + return r; +} +static inline void picorvspi_cfg3_write(unsigned char value) { + csr_writel(value, 0xe0005008L); +} +#define CSR_PICORVSPI_CFG3_RLAT_OFFSET 0 +#define CSR_PICORVSPI_CFG3_RLAT_SIZE 4 +#define CSR_PICORVSPI_CFG3_CRM_OFFSET 4 +#define CSR_PICORVSPI_CFG3_CRM_SIZE 1 +#define CSR_PICORVSPI_CFG3_QSPI_OFFSET 5 +#define CSR_PICORVSPI_CFG3_QSPI_SIZE 1 +#define CSR_PICORVSPI_CFG3_DDR_OFFSET 6 +#define CSR_PICORVSPI_CFG3_DDR_SIZE 1 +#define CSR_PICORVSPI_CFG4_ADDR 0xe000500cL +#define CSR_PICORVSPI_CFG4_SIZE 1 +static inline unsigned char picorvspi_cfg4_read(void) { + unsigned char r = csr_readl(0xe000500cL); + return r; +} +static inline void picorvspi_cfg4_write(unsigned char value) { + csr_writel(value, 0xe000500cL); +} +#define CSR_PICORVSPI_CFG4_MEMIO_OFFSET 7 +#define CSR_PICORVSPI_CFG4_MEMIO_SIZE 1 +#define CSR_PICORVSPI_STAT1_ADDR 0xe0005010L +#define CSR_PICORVSPI_STAT1_SIZE 1 +static inline unsigned char picorvspi_stat1_read(void) { + unsigned char r = csr_readl(0xe0005010L); + return r; +} +#define CSR_PICORVSPI_STAT1_BB_IN_OFFSET 0 +#define CSR_PICORVSPI_STAT1_BB_IN_SIZE 4 +#define CSR_PICORVSPI_STAT2_ADDR 0xe0005014L +#define CSR_PICORVSPI_STAT2_SIZE 1 +static inline unsigned char picorvspi_stat2_read(void) { + unsigned char r = csr_readl(0xe0005014L); + return r; +} +#define CSR_PICORVSPI_STAT3_ADDR 0xe0005018L +#define CSR_PICORVSPI_STAT3_SIZE 1 +static inline unsigned char picorvspi_stat3_read(void) { + unsigned char r = csr_readl(0xe0005018L); + return r; +} +#define CSR_PICORVSPI_STAT4_ADDR 0xe000501cL +#define CSR_PICORVSPI_STAT4_SIZE 1 +static inline unsigned char picorvspi_stat4_read(void) { + unsigned char r = csr_readl(0xe000501cL); + return r; +} + +/* reboot */ +#define CSR_REBOOT_BASE 0xe0006000L +#define CSR_REBOOT_CTRL_ADDR 0xe0006000L +#define CSR_REBOOT_CTRL_SIZE 1 +static inline unsigned char reboot_ctrl_read(void) { + unsigned char r = csr_readl(0xe0006000L); + return r; +} +static inline void reboot_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0006000L); +} +#define CSR_REBOOT_CTRL_IMAGE_OFFSET 0 +#define CSR_REBOOT_CTRL_IMAGE_SIZE 2 +#define CSR_REBOOT_CTRL_KEY_OFFSET 2 +#define CSR_REBOOT_CTRL_KEY_SIZE 6 +#define CSR_REBOOT_ADDR_ADDR 0xe0006004L +#define CSR_REBOOT_ADDR_SIZE 4 +static inline unsigned int reboot_addr_read(void) { + unsigned int r = csr_readl(0xe0006004L); + r <<= 8; + r |= csr_readl(0xe0006008L); + r <<= 8; + r |= csr_readl(0xe000600cL); + r <<= 8; + r |= csr_readl(0xe0006010L); + return r; +} +static inline void reboot_addr_write(unsigned int value) { + csr_writel(value >> 24, 0xe0006004L); + csr_writel(value >> 16, 0xe0006008L); + csr_writel(value >> 8, 0xe000600cL); + csr_writel(value, 0xe0006010L); +} + +/* rgb */ +#define CSR_RGB_BASE 0xe0006800L +#define CSR_RGB_DAT_ADDR 0xe0006800L +#define CSR_RGB_DAT_SIZE 1 +static inline unsigned char rgb_dat_read(void) { + unsigned char r = csr_readl(0xe0006800L); + return r; +} +static inline void rgb_dat_write(unsigned char value) { + csr_writel(value, 0xe0006800L); +} +#define CSR_RGB_ADDR_ADDR 0xe0006804L +#define CSR_RGB_ADDR_SIZE 1 +static inline unsigned char rgb_addr_read(void) { + unsigned char r = csr_readl(0xe0006804L); + return r; +} +static inline void rgb_addr_write(unsigned char value) { + csr_writel(value, 0xe0006804L); +} +#define CSR_RGB_CTRL_ADDR 0xe0006808L +#define CSR_RGB_CTRL_SIZE 1 +static inline unsigned char rgb_ctrl_read(void) { + unsigned char r = csr_readl(0xe0006808L); + return r; +} +static inline void rgb_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0006808L); +} +#define CSR_RGB_CTRL_EXE_OFFSET 0 +#define CSR_RGB_CTRL_EXE_SIZE 1 +#define CSR_RGB_CTRL_CURREN_OFFSET 1 +#define CSR_RGB_CTRL_CURREN_SIZE 1 +#define CSR_RGB_CTRL_RGBLEDEN_OFFSET 2 +#define CSR_RGB_CTRL_RGBLEDEN_SIZE 1 +#define CSR_RGB_CTRL_RRAW_OFFSET 3 +#define CSR_RGB_CTRL_RRAW_SIZE 1 +#define CSR_RGB_CTRL_GRAW_OFFSET 4 +#define CSR_RGB_CTRL_GRAW_SIZE 1 +#define CSR_RGB_CTRL_BRAW_OFFSET 5 +#define CSR_RGB_CTRL_BRAW_SIZE 1 +#define CSR_RGB_RAW_ADDR 0xe000680cL +#define CSR_RGB_RAW_SIZE 1 +static inline unsigned char rgb_raw_read(void) { + unsigned char r = csr_readl(0xe000680cL); + return r; +} +static inline void rgb_raw_write(unsigned char value) { + csr_writel(value, 0xe000680cL); +} +#define CSR_RGB_RAW_R_OFFSET 0 +#define CSR_RGB_RAW_R_SIZE 1 +#define CSR_RGB_RAW_G_OFFSET 1 +#define CSR_RGB_RAW_G_SIZE 1 +#define CSR_RGB_RAW_B_OFFSET 2 +#define CSR_RGB_RAW_B_SIZE 1 + +/* timer0 */ +#define CSR_TIMER0_BASE 0xe0002800L +#define CSR_TIMER0_LOAD_ADDR 0xe0002800L +#define CSR_TIMER0_LOAD_SIZE 4 +static inline unsigned int timer0_load_read(void) { + unsigned int r = csr_readl(0xe0002800L); + r <<= 8; + r |= csr_readl(0xe0002804L); + r <<= 8; + r |= csr_readl(0xe0002808L); + r <<= 8; + r |= csr_readl(0xe000280cL); + return r; +} +static inline void timer0_load_write(unsigned int value) { + csr_writel(value >> 24, 0xe0002800L); + csr_writel(value >> 16, 0xe0002804L); + csr_writel(value >> 8, 0xe0002808L); + csr_writel(value, 0xe000280cL); +} +#define CSR_TIMER0_RELOAD_ADDR 0xe0002810L +#define CSR_TIMER0_RELOAD_SIZE 4 +static inline unsigned int timer0_reload_read(void) { + unsigned int r = csr_readl(0xe0002810L); + r <<= 8; + r |= csr_readl(0xe0002814L); + r <<= 8; + r |= csr_readl(0xe0002818L); + r <<= 8; + r |= csr_readl(0xe000281cL); + return r; +} +static inline void timer0_reload_write(unsigned int value) { + csr_writel(value >> 24, 0xe0002810L); + csr_writel(value >> 16, 0xe0002814L); + csr_writel(value >> 8, 0xe0002818L); + csr_writel(value, 0xe000281cL); +} +#define CSR_TIMER0_EN_ADDR 0xe0002820L +#define CSR_TIMER0_EN_SIZE 1 +static inline unsigned char timer0_en_read(void) { + unsigned char r = csr_readl(0xe0002820L); + return r; +} +static inline void timer0_en_write(unsigned char value) { + csr_writel(value, 0xe0002820L); +} +#define CSR_TIMER0_UPDATE_VALUE_ADDR 0xe0002824L +#define CSR_TIMER0_UPDATE_VALUE_SIZE 1 +static inline unsigned char timer0_update_value_read(void) { + unsigned char r = csr_readl(0xe0002824L); + return r; +} +static inline void timer0_update_value_write(unsigned char value) { + csr_writel(value, 0xe0002824L); +} +#define CSR_TIMER0_VALUE_ADDR 0xe0002828L +#define CSR_TIMER0_VALUE_SIZE 4 +static inline unsigned int timer0_value_read(void) { + unsigned int r = csr_readl(0xe0002828L); + r <<= 8; + r |= csr_readl(0xe000282cL); + r <<= 8; + r |= csr_readl(0xe0002830L); + r <<= 8; + r |= csr_readl(0xe0002834L); + return r; +} +#define CSR_TIMER0_EV_STATUS_ADDR 0xe0002838L +#define CSR_TIMER0_EV_STATUS_SIZE 1 +static inline unsigned char timer0_ev_status_read(void) { + unsigned char r = csr_readl(0xe0002838L); + return r; +} +static inline void timer0_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0002838L); +} +#define CSR_TIMER0_EV_PENDING_ADDR 0xe000283cL +#define CSR_TIMER0_EV_PENDING_SIZE 1 +static inline unsigned char timer0_ev_pending_read(void) { + unsigned char r = csr_readl(0xe000283cL); + return r; +} +static inline void timer0_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe000283cL); +} +#define CSR_TIMER0_EV_ENABLE_ADDR 0xe0002840L +#define CSR_TIMER0_EV_ENABLE_SIZE 1 +static inline unsigned char timer0_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0002840L); + return r; +} +static inline void timer0_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0002840L); +} + +/* touch */ +#define CSR_TOUCH_BASE 0xe0005800L +#define CSR_TOUCH_O_ADDR 0xe0005800L +#define CSR_TOUCH_O_SIZE 1 +static inline unsigned char touch_o_read(void) { + unsigned char r = csr_readl(0xe0005800L); + return r; +} +static inline void touch_o_write(unsigned char value) { + csr_writel(value, 0xe0005800L); +} +#define CSR_TOUCH_O_O_OFFSET 0 +#define CSR_TOUCH_O_O_SIZE 4 +#define CSR_TOUCH_OE_ADDR 0xe0005804L +#define CSR_TOUCH_OE_SIZE 1 +static inline unsigned char touch_oe_read(void) { + unsigned char r = csr_readl(0xe0005804L); + return r; +} +static inline void touch_oe_write(unsigned char value) { + csr_writel(value, 0xe0005804L); +} +#define CSR_TOUCH_OE_OE_OFFSET 0 +#define CSR_TOUCH_OE_OE_SIZE 4 +#define CSR_TOUCH_I_ADDR 0xe0005808L +#define CSR_TOUCH_I_SIZE 1 +static inline unsigned char touch_i_read(void) { + unsigned char r = csr_readl(0xe0005808L); + return r; +} +#define CSR_TOUCH_I_I_OFFSET 0 +#define CSR_TOUCH_I_I_SIZE 4 + +/* usb */ +#define CSR_USB_BASE 0xe0004800L +#define CSR_USB_PULLUP_OUT_ADDR 0xe0004800L +#define CSR_USB_PULLUP_OUT_SIZE 1 +static inline unsigned char usb_pullup_out_read(void) { + unsigned char r = csr_readl(0xe0004800L); + return r; +} +static inline void usb_pullup_out_write(unsigned char value) { + csr_writel(value, 0xe0004800L); +} +#define CSR_USB_ADDRESS_ADDR 0xe0004804L +#define CSR_USB_ADDRESS_SIZE 1 +static inline unsigned char usb_address_read(void) { + unsigned char r = csr_readl(0xe0004804L); + return r; +} +static inline void usb_address_write(unsigned char value) { + csr_writel(value, 0xe0004804L); +} +#define CSR_USB_ADDRESS_ADDR_OFFSET 0 +#define CSR_USB_ADDRESS_ADDR_SIZE 7 +#define CSR_USB_NEXT_EV_ADDR 0xe0004808L +#define CSR_USB_NEXT_EV_SIZE 1 +static inline unsigned char usb_next_ev_read(void) { + unsigned char r = csr_readl(0xe0004808L); + return r; +} +#define CSR_USB_NEXT_EV_IN_OFFSET 0 +#define CSR_USB_NEXT_EV_IN_SIZE 1 +#define CSR_USB_NEXT_EV_OUT_OFFSET 1 +#define CSR_USB_NEXT_EV_OUT_SIZE 1 +#define CSR_USB_NEXT_EV_SETUP_OFFSET 2 +#define CSR_USB_NEXT_EV_SETUP_SIZE 1 +#define CSR_USB_NEXT_EV_RESET_OFFSET 3 +#define CSR_USB_NEXT_EV_RESET_SIZE 1 +#define CSR_USB_SETUP_DATA_ADDR 0xe000480cL +#define CSR_USB_SETUP_DATA_SIZE 1 +static inline unsigned char usb_setup_data_read(void) { + unsigned char r = csr_readl(0xe000480cL); + return r; +} +#define CSR_USB_SETUP_DATA_DATA_OFFSET 0 +#define CSR_USB_SETUP_DATA_DATA_SIZE 8 +#define CSR_USB_SETUP_CTRL_ADDR 0xe0004810L +#define CSR_USB_SETUP_CTRL_SIZE 1 +static inline unsigned char usb_setup_ctrl_read(void) { + unsigned char r = csr_readl(0xe0004810L); + return r; +} +static inline void usb_setup_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0004810L); +} +#define CSR_USB_SETUP_CTRL_RESET_OFFSET 5 +#define CSR_USB_SETUP_CTRL_RESET_SIZE 1 +#define CSR_USB_SETUP_STATUS_ADDR 0xe0004814L +#define CSR_USB_SETUP_STATUS_SIZE 1 +static inline unsigned char usb_setup_status_read(void) { + unsigned char r = csr_readl(0xe0004814L); + return r; +} +#define CSR_USB_SETUP_STATUS_EPNO_OFFSET 0 +#define CSR_USB_SETUP_STATUS_EPNO_SIZE 4 +#define CSR_USB_SETUP_STATUS_HAVE_OFFSET 4 +#define CSR_USB_SETUP_STATUS_HAVE_SIZE 1 +#define CSR_USB_SETUP_STATUS_PEND_OFFSET 5 +#define CSR_USB_SETUP_STATUS_PEND_SIZE 1 +#define CSR_USB_SETUP_STATUS_IS_IN_OFFSET 6 +#define CSR_USB_SETUP_STATUS_IS_IN_SIZE 1 +#define CSR_USB_SETUP_STATUS_DATA_OFFSET 7 +#define CSR_USB_SETUP_STATUS_DATA_SIZE 1 +#define CSR_USB_SETUP_EV_STATUS_ADDR 0xe0004818L +#define CSR_USB_SETUP_EV_STATUS_SIZE 1 +static inline unsigned char usb_setup_ev_status_read(void) { + unsigned char r = csr_readl(0xe0004818L); + return r; +} +static inline void usb_setup_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0004818L); +} +#define CSR_USB_SETUP_EV_PENDING_ADDR 0xe000481cL +#define CSR_USB_SETUP_EV_PENDING_SIZE 1 +static inline unsigned char usb_setup_ev_pending_read(void) { + unsigned char r = csr_readl(0xe000481cL); + return r; +} +static inline void usb_setup_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe000481cL); +} +#define CSR_USB_SETUP_EV_ENABLE_ADDR 0xe0004820L +#define CSR_USB_SETUP_EV_ENABLE_SIZE 1 +static inline unsigned char usb_setup_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0004820L); + return r; +} +static inline void usb_setup_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0004820L); +} +#define CSR_USB_IN_DATA_ADDR 0xe0004824L +#define CSR_USB_IN_DATA_SIZE 1 +static inline unsigned char usb_in_data_read(void) { + unsigned char r = csr_readl(0xe0004824L); + return r; +} +static inline void usb_in_data_write(unsigned char value) { + csr_writel(value, 0xe0004824L); +} +#define CSR_USB_IN_DATA_DATA_OFFSET 0 +#define CSR_USB_IN_DATA_DATA_SIZE 8 +#define CSR_USB_IN_CTRL_ADDR 0xe0004828L +#define CSR_USB_IN_CTRL_SIZE 1 +static inline unsigned char usb_in_ctrl_read(void) { + unsigned char r = csr_readl(0xe0004828L); + return r; +} +static inline void usb_in_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0004828L); +} +#define CSR_USB_IN_CTRL_EPNO_OFFSET 0 +#define CSR_USB_IN_CTRL_EPNO_SIZE 4 +#define CSR_USB_IN_CTRL_RESET_OFFSET 5 +#define CSR_USB_IN_CTRL_RESET_SIZE 1 +#define CSR_USB_IN_CTRL_STALL_OFFSET 6 +#define CSR_USB_IN_CTRL_STALL_SIZE 1 +#define CSR_USB_IN_STATUS_ADDR 0xe000482cL +#define CSR_USB_IN_STATUS_SIZE 1 +static inline unsigned char usb_in_status_read(void) { + unsigned char r = csr_readl(0xe000482cL); + return r; +} +#define CSR_USB_IN_STATUS_IDLE_OFFSET 0 +#define CSR_USB_IN_STATUS_IDLE_SIZE 1 +#define CSR_USB_IN_STATUS_HAVE_OFFSET 4 +#define CSR_USB_IN_STATUS_HAVE_SIZE 1 +#define CSR_USB_IN_STATUS_PEND_OFFSET 5 +#define CSR_USB_IN_STATUS_PEND_SIZE 1 +#define CSR_USB_IN_EV_STATUS_ADDR 0xe0004830L +#define CSR_USB_IN_EV_STATUS_SIZE 1 +static inline unsigned char usb_in_ev_status_read(void) { + unsigned char r = csr_readl(0xe0004830L); + return r; +} +static inline void usb_in_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0004830L); +} +#define CSR_USB_IN_EV_PENDING_ADDR 0xe0004834L +#define CSR_USB_IN_EV_PENDING_SIZE 1 +static inline unsigned char usb_in_ev_pending_read(void) { + unsigned char r = csr_readl(0xe0004834L); + return r; +} +static inline void usb_in_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe0004834L); +} +#define CSR_USB_IN_EV_ENABLE_ADDR 0xe0004838L +#define CSR_USB_IN_EV_ENABLE_SIZE 1 +static inline unsigned char usb_in_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0004838L); + return r; +} +static inline void usb_in_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0004838L); +} +#define CSR_USB_OUT_DATA_ADDR 0xe000483cL +#define CSR_USB_OUT_DATA_SIZE 1 +static inline unsigned char usb_out_data_read(void) { + unsigned char r = csr_readl(0xe000483cL); + return r; +} +#define CSR_USB_OUT_DATA_DATA_OFFSET 0 +#define CSR_USB_OUT_DATA_DATA_SIZE 8 +#define CSR_USB_OUT_CTRL_ADDR 0xe0004840L +#define CSR_USB_OUT_CTRL_SIZE 1 +static inline unsigned char usb_out_ctrl_read(void) { + unsigned char r = csr_readl(0xe0004840L); + return r; +} +static inline void usb_out_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0004840L); +} +#define CSR_USB_OUT_CTRL_EPNO_OFFSET 0 +#define CSR_USB_OUT_CTRL_EPNO_SIZE 4 +#define CSR_USB_OUT_CTRL_ENABLE_OFFSET 4 +#define CSR_USB_OUT_CTRL_ENABLE_SIZE 1 +#define CSR_USB_OUT_CTRL_RESET_OFFSET 5 +#define CSR_USB_OUT_CTRL_RESET_SIZE 1 +#define CSR_USB_OUT_CTRL_STALL_OFFSET 6 +#define CSR_USB_OUT_CTRL_STALL_SIZE 1 +#define CSR_USB_OUT_STATUS_ADDR 0xe0004844L +#define CSR_USB_OUT_STATUS_SIZE 1 +static inline unsigned char usb_out_status_read(void) { + unsigned char r = csr_readl(0xe0004844L); + return r; +} +#define CSR_USB_OUT_STATUS_EPNO_OFFSET 0 +#define CSR_USB_OUT_STATUS_EPNO_SIZE 4 +#define CSR_USB_OUT_STATUS_HAVE_OFFSET 4 +#define CSR_USB_OUT_STATUS_HAVE_SIZE 1 +#define CSR_USB_OUT_STATUS_PEND_OFFSET 5 +#define CSR_USB_OUT_STATUS_PEND_SIZE 1 +#define CSR_USB_OUT_EV_STATUS_ADDR 0xe0004848L +#define CSR_USB_OUT_EV_STATUS_SIZE 1 +static inline unsigned char usb_out_ev_status_read(void) { + unsigned char r = csr_readl(0xe0004848L); + return r; +} +static inline void usb_out_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0004848L); +} +#define CSR_USB_OUT_EV_PENDING_ADDR 0xe000484cL +#define CSR_USB_OUT_EV_PENDING_SIZE 1 +static inline unsigned char usb_out_ev_pending_read(void) { + unsigned char r = csr_readl(0xe000484cL); + return r; +} +static inline void usb_out_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe000484cL); +} +#define CSR_USB_OUT_EV_ENABLE_ADDR 0xe0004850L +#define CSR_USB_OUT_EV_ENABLE_SIZE 1 +static inline unsigned char usb_out_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0004850L); + return r; +} +static inline void usb_out_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0004850L); +} +#define CSR_USB_OUT_ENABLE_STATUS_ADDR 0xe0004854L +#define CSR_USB_OUT_ENABLE_STATUS_SIZE 1 +static inline unsigned char usb_out_enable_status_read(void) { + unsigned char r = csr_readl(0xe0004854L); + return r; +} +#define CSR_USB_OUT_STALL_STATUS_ADDR 0xe0004858L +#define CSR_USB_OUT_STALL_STATUS_SIZE 1 +static inline unsigned char usb_out_stall_status_read(void) { + unsigned char r = csr_readl(0xe0004858L); + return r; +} + +/* version */ +#define CSR_VERSION_BASE 0xe0007000L +#define CSR_VERSION_MAJOR_ADDR 0xe0007000L +#define CSR_VERSION_MAJOR_SIZE 1 +static inline unsigned char version_major_read(void) { + unsigned char r = csr_readl(0xe0007000L); + return r; +} +#define CSR_VERSION_MINOR_ADDR 0xe0007004L +#define CSR_VERSION_MINOR_SIZE 1 +static inline unsigned char version_minor_read(void) { + unsigned char r = csr_readl(0xe0007004L); + return r; +} +#define CSR_VERSION_REVISION_ADDR 0xe0007008L +#define CSR_VERSION_REVISION_SIZE 1 +static inline unsigned char version_revision_read(void) { + unsigned char r = csr_readl(0xe0007008L); + return r; +} +#define CSR_VERSION_GITREV_ADDR 0xe000700cL +#define CSR_VERSION_GITREV_SIZE 4 +static inline unsigned int version_gitrev_read(void) { + unsigned int r = csr_readl(0xe000700cL); + r <<= 8; + r |= csr_readl(0xe0007010L); + r <<= 8; + r |= csr_readl(0xe0007014L); + r <<= 8; + r |= csr_readl(0xe0007018L); + return r; +} +#define CSR_VERSION_GITEXTRA_ADDR 0xe000701cL +#define CSR_VERSION_GITEXTRA_SIZE 2 +static inline unsigned short int version_gitextra_read(void) { + unsigned short int r = csr_readl(0xe000701cL); + r <<= 8; + r |= csr_readl(0xe0007020L); + return r; +} +#define CSR_VERSION_DIRTY_ADDR 0xe0007024L +#define CSR_VERSION_DIRTY_SIZE 1 +static inline unsigned char version_dirty_read(void) { + unsigned char r = csr_readl(0xe0007024L); + return r; +} +#define CSR_VERSION_DIRTY_DIRTY_OFFSET 0 +#define CSR_VERSION_DIRTY_DIRTY_SIZE 1 +#define CSR_VERSION_MODEL_ADDR 0xe0007028L +#define CSR_VERSION_MODEL_SIZE 1 +static inline unsigned char version_model_read(void) { + unsigned char r = csr_readl(0xe0007028L); + return r; +} +#define CSR_VERSION_MODEL_MODEL_OFFSET 0 +#define CSR_VERSION_MODEL_MODEL_SIZE 8 +#define CSR_VERSION_SEED_ADDR 0xe000702cL +#define CSR_VERSION_SEED_SIZE 4 +static inline unsigned int version_seed_read(void) { + unsigned int r = csr_readl(0xe000702cL); + r <<= 8; + r |= csr_readl(0xe0007030L); + r <<= 8; + r |= csr_readl(0xe0007034L); + r <<= 8; + r |= csr_readl(0xe0007038L); + return r; +} + +/* constants */ +#define TIMER0_INTERRUPT 2 +static inline int timer0_interrupt_read(void) { + return 2; +} +#define USB_INTERRUPT 3 +static inline int usb_interrupt_read(void) { + return 3; +} +#define CONFIG_BITSTREAM_SYNC_HEADER1 2123999870 +static inline int config_bitstream_sync_header1_read(void) { + return 2123999870; +} +#define CONFIG_BITSTREAM_SYNC_HEADER2 2125109630 +static inline int config_bitstream_sync_header2_read(void) { + return 2125109630; +} +#define CONFIG_CLOCK_FREQUENCY 12000000 +static inline int config_clock_frequency_read(void) { + return 12000000; +} +#define CONFIG_CPU_RESET_ADDR 0 +static inline int config_cpu_reset_addr_read(void) { + return 0; +} +#define CONFIG_CPU_TYPE "VEXRISCV" +static inline const char * config_cpu_type_read(void) { + return "VEXRISCV"; +} +#define CONFIG_CPU_TYPE_VEXRISCV 1 +static inline int config_cpu_type_vexriscv_read(void) { + return 1; +} +#define CONFIG_CPU_VARIANT "MIN" +static inline const char * config_cpu_variant_read(void) { + return "MIN"; +} +#define CONFIG_CPU_VARIANT_MIN 1 +static inline int config_cpu_variant_min_read(void) { + return 1; +} +#define CONFIG_CSR_ALIGNMENT 32 +static inline int config_csr_alignment_read(void) { + return 32; +} +#define CONFIG_CSR_DATA_WIDTH 8 +static inline int config_csr_data_width_read(void) { + return 8; +} + +#endif diff --git a/tinyusb/hw/bsp/fomu/include/hw/common.h b/tinyusb/hw/bsp/fomu/include/hw/common.h new file mode 100755 index 00000000..6a97ca2e --- /dev/null +++ b/tinyusb/hw/bsp/fomu/include/hw/common.h @@ -0,0 +1,33 @@ +#ifndef _HW_COMMON_H_ +#define _HW_COMMON_H_ +#include <stdint.h> +static inline void csr_writeb(uint8_t value, uint32_t addr) +{ + *((volatile uint8_t *)addr) = value; +} + +static inline uint8_t csr_readb(uint32_t addr) +{ + return *(volatile uint8_t *)addr; +} + +static inline void csr_writew(uint16_t value, uint32_t addr) +{ + *((volatile uint16_t *)addr) = value; +} + +static inline uint16_t csr_readw(uint32_t addr) +{ + return *(volatile uint16_t *)addr; +} + +static inline void csr_writel(uint32_t value, uint32_t addr) +{ + *((volatile uint32_t *)addr) = value; +} + +static inline uint32_t csr_readl(uint32_t addr) +{ + return *(volatile uint32_t *)addr; +} +#endif /* _HW_COMMON_H_ */
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/include/irq.h b/tinyusb/hw/bsp/fomu/include/irq.h new file mode 100755 index 00000000..a8221890 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/include/irq.h @@ -0,0 +1,71 @@ +#ifndef __IRQ_H +#define __IRQ_H + +#ifdef __cplusplus +extern "C" { +#endif + + +#define CSR_MSTATUS_MIE 0x8 + +#define CSR_IRQ_MASK 0xBC0 +#define CSR_IRQ_PENDING 0xFC0 + +#define CSR_DCACHE_INFO 0xCC0 + +#define csrr(reg) ({ unsigned long __tmp; \ + asm volatile ("csrr %0, " #reg : "=r"(__tmp)); \ + __tmp; }) + +#define csrw(reg, val) ({ \ + if (__builtin_constant_p(val) && (unsigned long)(val) < 32) \ + asm volatile ("csrw " #reg ", %0" :: "i"(val)); \ + else \ + asm volatile ("csrw " #reg ", %0" :: "r"(val)); }) + +#define csrs(reg, bit) ({ \ + if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ + asm volatile ("csrrs x0, " #reg ", %0" :: "i"(bit)); \ + else \ + asm volatile ("csrrs x0, " #reg ", %0" :: "r"(bit)); }) + +#define csrc(reg, bit) ({ \ + if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ + asm volatile ("csrrc x0, " #reg ", %0" :: "i"(bit)); \ + else \ + asm volatile ("csrrc x0, " #reg ", %0" :: "r"(bit)); }) + +static inline unsigned int irq_getie(void) +{ + return (csrr(mstatus) & CSR_MSTATUS_MIE) != 0; +} + +static inline void irq_setie(unsigned int ie) +{ + if(ie) csrs(mstatus,CSR_MSTATUS_MIE); else csrc(mstatus,CSR_MSTATUS_MIE); +} + +static inline unsigned int irq_getmask(void) +{ + unsigned int mask; + asm volatile ("csrr %0, %1" : "=r"(mask) : "i"(CSR_IRQ_MASK)); + return mask; +} + +static inline void irq_setmask(unsigned int mask) +{ + asm volatile ("csrw %0, %1" :: "i"(CSR_IRQ_MASK), "r"(mask)); +} + +static inline unsigned int irq_pending(void) +{ + unsigned int pending; + asm volatile ("csrr %0, %1" : "=r"(pending) : "i"(CSR_IRQ_PENDING)); + return pending; +} + +#ifdef __cplusplus +} +#endif + +#endif /* __IRQ_H */
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/output_format.ld b/tinyusb/hw/bsp/fomu/output_format.ld new file mode 100755 index 00000000..5e76f5f4 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/output_format.ld @@ -0,0 +1 @@ +OUTPUT_FORMAT("elf32-littleriscv") diff --git a/tinyusb/hw/bsp/fomu/regions.ld b/tinyusb/hw/bsp/fomu/regions.ld new file mode 100755 index 00000000..51811f66 --- /dev/null +++ b/tinyusb/hw/bsp/fomu/regions.ld @@ -0,0 +1,6 @@ +MEMORY { + csr : ORIGIN = 0x60000000, LENGTH = 0x01000000 + vexriscv_debug : ORIGIN = 0xf00f0000, LENGTH = 0x00000100 + sram : ORIGIN = 0x10000000, LENGTH = 0x00020000 + rom : ORIGIN = 0x00000000, LENGTH = 0x00002000 +} diff --git a/tinyusb/hw/bsp/frdm_k32l2b/board.h b/tinyusb/hw/bsp/frdm_k32l2b/board.h new file mode 100755 index 00000000..82536791 --- /dev/null +++ b/tinyusb/hw/bsp/frdm_k32l2b/board.h @@ -0,0 +1,56 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// LED +#define LED_PIN_CLOCK kCLOCK_PortD +#define LED_GPIO GPIOD +#define LED_PORT PORTD +#define LED_PIN 5 +#define LED_STATE_ON 0 + +// SW3 button1 +#define BUTTON_PIN_CLOCK kCLOCK_PortC +#define BUTTON_GPIO GPIOC +#define BUTTON_PORT PORTC +#define BUTTON_PIN 3 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART0 +#define UART_PIN_CLOCK kCLOCK_PortA +#define UART_PIN_PORT PORTA +#define UART_PIN_RX 1u +#define UART_PIN_TX 2u +#define SOPT5_LPUART0RXSRC_LPUART_RX 0x00u /*!<@brief LPUART0 Receive Data Source Select: LPUART_RX pin */ +#define SOPT5_LPUART0TXSRC_LPUART_TX 0x00u /*!<@brief LPUART0 Transmit Data Source Select: LPUART0_TX pin */ + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/frdm_k32l2b/board.mk b/tinyusb/hw/bsp/frdm_k32l2b/board.mk new file mode 100755 index 00000000..56df553d --- /dev/null +++ b/tinyusb/hw/bsp/frdm_k32l2b/board.mk @@ -0,0 +1,51 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2B31VLH0A \ + -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = $(SDK_DIR)/devices/K32L2B31A + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + $(MCU_DIR)/system_K32L2B31A.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/gpio \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/lpuart \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = MKL25Z128xxx4 + +# For flash-pyocd target +PYOCD_TARGET = K32L2B + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/frdm_k32l2b/frdm_k32l2b.c b/tinyusb/hw/bsp/frdm_k32l2b/frdm_k32l2b.c new file mode 100755 index 00000000..c45095ca --- /dev/null +++ b/tinyusb/hw/bsp/frdm_k32l2b/frdm_k32l2b.c @@ -0,0 +1,140 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "board.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* Enable port clocks for UART/LED/Button pins */ + CLOCK_EnableClock(UART_PIN_CLOCK); + CLOCK_EnableClock(LED_PIN_CLOCK); + CLOCK_EnableClock(BUTTON_PIN_CLOCK); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); + PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); + + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); + + /* PORTA1 (pin 23) is configured as LPUART0_RX */ + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); + /* PORTA2 (pin 24) is configured as LPUART0_TX */ + PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); + + SIM->SOPT5 = ((SIM->SOPT5 & + /* Mask bits to zero which are setting */ + (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) + /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ + | SIM_SOPT5_LPUART0TXSRC(SOPT5_LPUART0TXSRC_LPUART_TX) + /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ + | SIM_SOPT5_LPUART0RXSRC(SOPT5_LPUART0RXSRC_LPUART_RX)); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + CLOCK_SetLpuart0Clock(1); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/frdm_kl25z/board.mk b/tinyusb/hw/bsp/frdm_kl25z/board.mk new file mode 100755 index 00000000..451bc37c --- /dev/null +++ b/tinyusb/hw/bsp/frdm_kl25z/board.mk @@ -0,0 +1,46 @@ +SDK_DIR = hw/mcu/nxp/nxp_sdk +DEPS_SUBMODULES += $(SDK_DIR) + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCPU_MKL25Z128VLK4 \ + -DCFG_TUSB_MCU=OPT_MCU_MKL25ZXX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = $(SDK_DIR)/devices/MKL25Z4 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + $(MCU_DIR)/system_MKL25Z4.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_lpsci.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MKL25Z4.S + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = MKL25Z128xxx4 + +# For flash-pyocd target +PYOCD_TARGET = mkl25zl128 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c b/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c new file mode 100755 index 00000000..7d3a173e --- /dev/null +++ b/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c @@ -0,0 +1,148 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpsci.h" + +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIOB +#define LED_PIN_CLOCK kCLOCK_PortB +#define LED_PIN_PORT PORTB +#define LED_PIN 19U +#define LED_PIN_FUNCTION kPORT_MuxAsGpio +#define LED_STATE_ON 0 + +// UART +#define UART_PORT UART0 +#define UART_PIN_CLOCK kCLOCK_PortA +#define UART_PIN_PORT PORTA +#define UART_PIN_RX 1u +#define UART_PIN_TX 2u +#define UART_PIN_FUNCTION kPORT_MuxAlt2 +#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ +#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + CLOCK_EnableClock(LED_PIN_CLOCK); + PORT_SetPinMux(LED_PIN_PORT, LED_PIN, LED_PIN_FUNCTION); + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // UART + CLOCK_EnableClock(UART_PIN_CLOCK); + PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION); + PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION); + SIM->SOPT5 = ((SIM->SOPT5 & + (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK))) + | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX) + | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX) + ); + + lpsci_config_t uart_config; + CLOCK_SetLpsci0Clock(1); + LPSCI_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPSCI_Init(UART_PORT, &uart_config, CLOCK_GetPllFllSelClkFreq()); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPSCI_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPSCI_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h b/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h new file mode 100755 index 00000000..fae7c40b --- /dev/null +++ b/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h @@ -0,0 +1,20 @@ +#ifndef _NUCLEI_SDK_HAL_H +#define _NUCLEI_SDK_HAL_H + +#include "gd32vf103c_longan_nano.h" + +// 4 bits for interrupt level, 0 for priority. +// level 0 = lowest priority, level 15 = highest priority. +#define __ECLIC_INTCTLBITS 4 + +#define __SYSTEM_CLOCK 72000000 +#define HXTAL_VALUE ((uint32_t)8000000) + +#define SOC_DEBUG_UART GD32_COM0 + +#define DBG_KEY_UNLOCK 0x4B5A6978 +#define DBG_CMD_RESET 0x1 +#define DBG_KEY REG32(DBG + 0x0C) +#define DBG_CMD REG32(DBG + 0x08) + +#endif diff --git a/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk b/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk new file mode 100755 index 00000000..3b894445 --- /dev/null +++ b/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk @@ -0,0 +1,13 @@ +LONGAN_NANO_SDK_BSP = $(GD32VF103_SDK_SOC)/Board/gd32vf103c_longan_nano +LINKER_SCRIPTS = $(LONGAN_NANO_SDK_BSP)/Source/GCC + +# All source paths should be relative to the top level. +LD_FILE = $(LINKER_SCRIPTS)/gcc_gd32vf103xb_flashxip.ld # Longan Nano 128k ROM 32k RAM +#LD_FILE = $(LINKER_SCRIPTS)/gcc_gd32vf103x8_flashxip.ld # Longan Nano Lite 64k ROM 20k RAM + +SRC_C += $(LONGAN_NANO_SDK_BSP)/Source/gd32vf103c_longan_nano.c +INC += $(TOP)/$(LONGAN_NANO_SDK_BSP)/Include + +# Longan Nano 128k ROM 32k RAM +JLINK_DEVICE = gd32vf103cbt6 +#JLINK_DEVICE = gd32vf103c8t6 # Longan Nano Lite 64k ROM 20k RAM diff --git a/tinyusb/hw/bsp/gd32vf103/family.c b/tinyusb/hw/bsp/gd32vf103/family.c new file mode 100755 index 00000000..d76fb9a2 --- /dev/null +++ b/tinyusb/hw/bsp/gd32vf103/family.c @@ -0,0 +1,197 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "board.h" +#include "drv_usb_hw.h" +#include "drv_usb_dev.h" + +#include "../board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +void USBFS_IRQHandler(void) { tud_int_handler(0); } + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define USB_NO_VBUS_PIN + +// According to GD32VF103 user manual clock tree: +// Systick clock = AHB clock / 4. +#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV SOC_DEBUG_UART + +#define LED_PIN LED_R + +void board_init(void) { + /* Disable interrupts during init */ + __disable_irq(); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(TIMER_TICKS); +#endif + + rcu_periph_clock_enable(RCU_GPIOA); + rcu_periph_clock_enable(RCU_GPIOB); + rcu_periph_clock_enable(RCU_GPIOC); + rcu_periph_clock_enable(RCU_GPIOD); + rcu_periph_clock_enable(RCU_AF); + +#ifdef BUTTON_PIN + gpio_init(BUTTON_PORT, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, BUTTON_PIN); +#endif + +#ifdef LED_PIN + gd_led_init(LED_PIN); +#endif + +#if defined(UART_DEV) + gd_com_init(UART_DEV); +#endif + + /* USB D+ and D- pins don't need to be configured. */ + /* Configure VBUS Pin */ +#ifndef USB_NO_VBUS_PIN + gpio_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_9); +#endif + + /* This for ID line debug */ + // gpio_init(GPIOA, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_10); + + /* Enable USB OTG clock */ + usb_rcu_config(); + + /* Reset USB OTG peripheral */ + rcu_periph_reset_enable(RCU_USBFSRST); + rcu_periph_reset_disable(RCU_USBFSRST); + + /* Configure USBFS IRQ */ + ECLIC_Register_IRQ(USBFS_IRQn, ECLIC_NON_VECTOR_INTERRUPT, + ECLIC_POSTIVE_EDGE_TRIGGER, 3, 0, NULL); + + /* Retrieve otg core registers */ + usb_gr* otg_core_regs = (usb_gr*)(USBFS_REG_BASE + USB_REG_OFFSET_CORE); + +#ifdef USB_NO_VBUS_PIN + /* Disable VBUS sense*/ + otg_core_regs->GCCFG |= GCCFG_VBUSIG | GCCFG_PWRON | GCCFG_VBUSBCEN; +#else + /* Enable VBUS sense via pin PA9 */ + otg_core_regs->GCCFG |= GCCFG_VBUSIG | GCCFG_PWRON | GCCFG_VBUSBCEN; + otg_core_regs->GCCFG &= ~GCCFG_VBUSIG; +#endif + + /* Enable interrupts globaly */ + __enable_irq(); +} + +void gd32vf103_reset(void) { + /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST + * register to generate a software reset request. + * BUT instead two undocumented registers in the debug peripheral + * that allow issueing a software reset. + * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h + */ + DBG_KEY = DBG_KEY_UNLOCK; + DBG_CMD = DBG_CMD_RESET; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + state ? gd_led_on(LED_PIN) : gd_led_off(LED_PIN); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == gpio_input_bit_get(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { +#if defined(UART_DEV) + int rxsize = len; + while (rxsize--) { + *(uint8_t*)buf = usart_read(UART_DEV); + buf++; + } + return len; +#else + (void)buf; + (void)len; + return 0; +#endif +} + +int board_uart_write(void const* buf, int len) { +#if defined(UART_DEV) + int txsize = len; + while (txsize--) { + usart_write(UART_DEV, *(uint8_t*)buf); + buf++; + } + return len; +#else + (void)buf; + (void)len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void eclic_mtip_handler(void) { + system_ticks++; + SysTick_Reload(TIMER_TICKS); +} +uint32_t board_millis(void) { return system_ticks; } +#endif + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(char* file, uint32_t line) { + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line + number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) + */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/tinyusb/hw/bsp/gd32vf103/family.mk b/tinyusb/hw/bsp/gd32vf103/family.mk new file mode 100755 index 00000000..9148e7f8 --- /dev/null +++ b/tinyusb/hw/bsp/gd32vf103/family.mk @@ -0,0 +1,68 @@ +# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable +#CROSS_COMPILE ?= riscv32-unknown-elf- + +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- + +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack +CROSS_COMPILE ?= riscv-none-embed- + +# Submodules +NUCLEI_SDK = hw/mcu/gd/nuclei-sdk +DEPS_SUBMODULES += $(NUCLEI_SDK) + +# Nuclei-SDK paths +GD32VF103_SDK_SOC = $(NUCLEI_SDK)/SoC/gd32vf103 +GD32VF103_SDK_DRIVER = $(GD32VF103_SDK_SOC)/Common/Source/Drivers +LIBC_STUBS = $(GD32VF103_SDK_SOC)/Common/Source/Stubs +STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC + +include $(TOP)/$(BOARD_PATH)/board.mk + +SKIP_NANOLIB = 1 + +CFLAGS += \ + -march=rv32imac \ + -mabi=ilp32 \ + -mcmodel=medlow \ + -mstrict-align \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_GD32VF103 \ + -DDOWNLOAD_MODE=DOWNLOAD_MODE_FLASHXIP \ + -DGD32VF103 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ + $(GD32VF103_SDK_DRIVER)/gd32vf103_gpio.c \ + $(GD32VF103_SDK_DRIVER)/Usb/gd32vf103_usb_hw.c \ + $(GD32VF103_SDK_DRIVER)/gd32vf103_usart.c \ + $(LIBC_STUBS)/sbrk.c \ + $(LIBC_STUBS)/close.c \ + $(LIBC_STUBS)/isatty.c \ + $(LIBC_STUBS)/fstat.c \ + $(LIBC_STUBS)/lseek.c \ + $(LIBC_STUBS)/read.c + +SRC_S += \ + $(STARTUP_ASM)/startup_gd32vf103.S \ + $(STARTUP_ASM)/intexc_gd32vf103.S + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(NUCLEI_SDK)/NMSIS/Core/Include \ + $(TOP)/$(GD32VF103_SDK_SOC)/Common/Include \ + $(TOP)/$(GD32VF103_SDK_SOC)/Common/Include/Usb + +# For freeRTOS port source +FREERTOS_PORT = RISC-V + +# For flash-jlink target +JLINK_IF = jtag + +# flash target ROM bootloader +flash: $(BUILD)/$(PROJECT).bin + dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/gd32vf103/system_gd32vf103.c b/tinyusb/hw/bsp/gd32vf103/system_gd32vf103.c new file mode 100755 index 00000000..29518a54 --- /dev/null +++ b/tinyusb/hw/bsp/gd32vf103/system_gd32vf103.c @@ -0,0 +1,668 @@ +/*! + \file system_gd32vf103.h +\brief RISC-V Device Peripheral Access Layer Source File for + GD32VF103 Device Series + +*/ + +/* + Copyright (c) 2020, GigaDevice Semiconductor Inc. + + Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. +*/ + +/* This file refers the RISC-V standard, some adjustments are made according to GigaDevice chips */ +#include "board.h" + +/* system frequency define */ +#define __IRC8M (IRC8M_VALUE) /* internal 8 MHz RC oscillator frequency */ +#define __HXTAL (HXTAL_VALUE) /* high speed crystal oscillator frequency */ +#define __SYS_OSC_CLK (__IRC8M) /* main oscillator frequency */ +#define __SYSTEM_CLOCK_HXTAL (HXTAL_VALUE) + +#if !defined(__SYSTEM_CLOCK) +#define __SYSTEM_CLOCK 72000000 +#endif + +#if __SYSTEM_CLOCK == 48000000 + #define __SYSTEM_CLOCK_48M_PLL_HXTAL (uint32_t)(48000000) + uint32_t SystemCoreClock = __SYSTEM_CLOCK_48M_PLL_HXTAL; + static void system_clock_48m_hxtal(void); + +#elif __SYSTEM_CLOCK == 72000000 + #define __SYSTEM_CLOCK_72M_PLL_HXTAL (uint32_t)(72000000) + uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_HXTAL; + static void system_clock_72m_hxtal(void); + +#elif __SYSTEM_CLOCK == 96000000 + #define __SYSTEM_CLOCK_96M_PLL_HXTAL (uint32_t)(96000000) + uint32_t SystemCoreClock = __SYSTEM_CLOCK_96M_PLL_HXTAL; + static void system_clock_96m_hxtal(void); + +#else +#error No valid system clock configuration set! +#endif + +/* configure the system clock */ +static void system_clock_config(void); + +/*! + \brief configure the system clock + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_config(void) +{ +#if defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) + system_clock_48m_hxtal(); +#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) + system_clock_72m_hxtal(); +#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) + system_clock_96m_hxtal(); +#endif /* __SYSTEM_CLOCK_HXTAL */ +} + +/*! + \brief setup the microcontroller system, initialize the system + \param[in] none + \param[out] none + \retval none +*/ +void SystemInit(void) +{ + /* reset the RCC clock configuration to the default reset state */ + /* enable IRC8M */ + RCU_CTL |= RCU_CTL_IRC8MEN; + + /* reset SCS, AHBPSC, APB1PSC, APB2PSC, ADCPSC, CKOUT0SEL bits */ + RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | + RCU_CFG0_ADCPSC | RCU_CFG0_ADCPSC_2 | RCU_CFG0_CKOUT0SEL); + + /* reset HXTALEN, CKMEN, PLLEN bits */ + RCU_CTL &= ~(RCU_CTL_HXTALEN | RCU_CTL_CKMEN | RCU_CTL_PLLEN); + + /* Reset HXTALBPS bit */ + RCU_CTL &= ~(RCU_CTL_HXTALBPS); + + /* reset PLLSEL, PREDV0_LSB, PLLMF, USBFSPSC bits */ + + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | + RCU_CFG0_USBFSPSC | RCU_CFG0_PLLMF_4); + RCU_CFG1 = 0x00000000U; + + /* Reset HXTALEN, CKMEN, PLLEN, PLL1EN and PLL2EN bits */ + RCU_CTL &= ~(RCU_CTL_PLLEN | RCU_CTL_PLL1EN | RCU_CTL_PLL2EN | RCU_CTL_CKMEN | RCU_CTL_HXTALEN); + /* disable all interrupts */ + RCU_INT = 0x00FF0000U; + + /* Configure the System clock source, PLL Multiplier, AHB/APBx prescalers and Flash settings */ + system_clock_config(); +} + +/*! + \brief update the SystemCoreClock with current core clock retrieved from cpu registers + \param[in] none + \param[out] none + \retval none +*/ +void SystemCoreClockUpdate(void) +{ + uint32_t scss; + uint32_t pllsel, predv0sel, pllmf, ck_src; + uint32_t predv0, predv1, pll1mf; + + scss = GET_BITS(RCU_CFG0, 2, 3); + + switch (scss) + { + /* IRC8M is selected as CK_SYS */ + case SEL_IRC8M: + SystemCoreClock = IRC8M_VALUE; + break; + + /* HXTAL is selected as CK_SYS */ + case SEL_HXTAL: + SystemCoreClock = HXTAL_VALUE; + break; + + /* PLL is selected as CK_SYS */ + case SEL_PLL: + /* PLL clock source selection, HXTAL or IRC8M/2 */ + pllsel = (RCU_CFG0 & RCU_CFG0_PLLSEL); + + + if(RCU_PLLSRC_IRC8M_DIV2 == pllsel){ + /* PLL clock source is IRC8M/2 */ + ck_src = IRC8M_VALUE / 2U; + }else{ + /* PLL clock source is HXTAL */ + ck_src = HXTAL_VALUE; + + predv0sel = (RCU_CFG1 & RCU_CFG1_PREDV0SEL); + + /* source clock use PLL1 */ + if(RCU_PREDV0SRC_CKPLL1 == predv0sel){ + predv1 = ((RCU_CFG1 & RCU_CFG1_PREDV1) >> 4) + 1U; + pll1mf = ((RCU_CFG1 & RCU_CFG1_PLL1MF) >> 8) + 2U; + if(17U == pll1mf){ + pll1mf = 20U; + } + ck_src = (ck_src / predv1) * pll1mf; + } + predv0 = (RCU_CFG1 & RCU_CFG1_PREDV0) + 1U; + ck_src /= predv0; + } + + /* PLL multiplication factor */ + pllmf = GET_BITS(RCU_CFG0, 18, 21); + + if((RCU_CFG0 & RCU_CFG0_PLLMF_4)){ + pllmf |= 0x10U; + } + + if(pllmf >= 15U){ + pllmf += 1U; + }else{ + pllmf += 2U; + } + + SystemCoreClock = ck_src * pllmf; + + if(15U == pllmf){ + /* PLL source clock multiply by 6.5 */ + SystemCoreClock = ck_src * 6U + ck_src / 2U; + } + + break; + + /* IRC8M is selected as CK_SYS */ + default: + SystemCoreClock = IRC8M_VALUE; + break; + } +} + +#if defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) +/*! + \brief configure the system clock to 48M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_48m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + /* CK_PLL = (CK_PREDIV0) * 12 = 48 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL12); + + if(HXTAL_VALUE==25000000){ + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } + + }else if(HXTAL_VALUE==8000000){ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_HXTAL | RCU_PREDV0_DIV2 ); + } + + + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) +/*! + \brief configure the system clock to 72M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_72m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL18); + + + if(HXTAL_VALUE==25000000){ + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } + + }else if(HXTAL_VALUE==8000000){ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_HXTAL | RCU_PREDV0_DIV2 ); + } + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) +/*! + \brief configure the system clock to 96M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source + \param[in] none + \param[out] none + \retval none +*/ +static void system_clock_96m_hxtal(void) +{ + uint32_t timeout = 0U; + uint32_t stab_flag = 0U; + + /* enable HXTAL */ + RCU_CTL |= RCU_CTL_HXTALEN; + + /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ + do{ + timeout++; + stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); + }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); + + /* if fail */ + if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ + while(1){ + } + } + + /* HXTAL is stable */ + /* AHB = SYSCLK */ + RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; + /* APB2 = AHB/1 */ + RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; + /* APB1 = AHB/2 */ + RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; + + if(HXTAL_VALUE==25000000){ + + /* CK_PLL = (CK_PREDIV0) * 24 = 96 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL24); + + /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); + /* enable PLL1 */ + RCU_CTL |= RCU_CTL_PLL1EN; + /* wait till PLL1 is ready */ + while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ + } + + }else if(HXTAL_VALUE==8000000){ + /* CK_PLL = (CK_PREDIV0) * 24 = 96 MHz */ + RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); + RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL24); + + RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV0); + RCU_CFG1 |= (RCU_PREDV0SRC_HXTAL | RCU_PREDV0_DIV2 ); + } + + /* enable PLL */ + RCU_CTL |= RCU_CTL_PLLEN; + + /* wait until PLL is stable */ + while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ + } + + /* select PLL as system clock */ + RCU_CFG0 &= ~RCU_CFG0_SCS; + RCU_CFG0 |= RCU_CKSYSSRC_PLL; + + /* wait until PLL is selected as system clock */ + while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ + } +} + +#endif + +/** + * \defgroup NMSIS_Core_IntExcNMI_Handling Interrupt and Exception and NMI Handling + * \brief Functions for interrupt, exception and nmi handle available in system_<device>.c. + * \details + * Nuclei provide a template for interrupt, exception and NMI handling. Silicon Vendor could adapat according + * to their requirement. Silicon vendor could implement interface for different exception code and + * replace current implementation. + * + * @{ + */ +/** \brief Max exception handler number, don't include the NMI(0xFFF) one */ +#define MAX_SYSTEM_EXCEPTION_NUM 12 +/** + * \brief Store the exception handlers for each exception ID + * \note + * - This SystemExceptionHandlers are used to store all the handlers for all + * the exception codes Nuclei N/NX core provided. + * - Exception code 0 - 11, totally 12 exceptions are mapped to SystemExceptionHandlers[0:11] + * - Exception for NMI is also re-routed to exception handling(exception code 0xFFF) in startup code configuration, the handler itself is mapped to SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM] + */ +static unsigned long SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM + 1]; + +/** + * \brief Exception Handler Function Typedef + * \note + * This typedef is only used internal in this system_gd32vf103.c file. + * It is used to do type conversion for registered exception handler before calling it. + */ +typedef void (*EXC_HANDLER)(unsigned long mcause, unsigned long sp); + +/** + * \brief System Default Exception Handler + * \details + * This function provided a default exception and NMI handling code for all exception ids. + * By default, It will just print some information for debug, Vendor can customize it according to its requirements. + */ +static void system_default_exception_handler(unsigned long mcause, unsigned long sp) +{ + /* TODO: Uncomment this if you have implement printf function */ + /*printf("MCAUSE: 0x%lx\r\n", mcause); + printf("MEPC : 0x%lx\r\n", __RV_CSR_READ(CSR_MEPC)); + printf("MTVAL : 0x%lx\r\n", __RV_CSR_READ(CSR_MBADADDR));*/ + while (1); +} + +/** + * \brief Initialize all the default core exception handlers + * \details + * The core exception handler for each exception id will be initialized to \ref system_default_exception_handler. + * \note + * Called in \ref _init function, used to initialize default exception handlers for all exception IDs + */ +static void Exception_Init(void) +{ + for (int i = 0; i < MAX_SYSTEM_EXCEPTION_NUM + 1; i++) { + SystemExceptionHandlers[i] = (unsigned long)system_default_exception_handler; + } +} + +/** + * \brief Register an exception handler for exception code EXCn + * \details + * * For EXCn < \ref MAX_SYSTEM_EXCEPTION_NUM, it will be registered into SystemExceptionHandlers[EXCn-1]. + * * For EXCn == NMI_EXCn, it will be registered into SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]. + * \param EXCn See \ref EXCn_Type + * \param exc_handler The exception handler for this exception code EXCn + */ +void Exception_Register_EXC(uint32_t EXCn, unsigned long exc_handler) +{ + if ((EXCn < MAX_SYSTEM_EXCEPTION_NUM) && (EXCn != 0)) { + SystemExceptionHandlers[EXCn] = exc_handler; + } else if (EXCn == NMI_EXCn) { + SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM] = exc_handler; + } +} + +/** + * \brief Get current exception handler for exception code EXCn + * \details + * * For EXCn < \ref MAX_SYSTEM_EXCEPTION_NUM, it will return SystemExceptionHandlers[EXCn-1]. + * * For EXCn == NMI_EXCn, it will return SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]. + * \param EXCn See \ref EXCn_Type + * \return Current exception handler for exception code EXCn, if not found, return 0. + */ +unsigned long Exception_Get_EXC(uint32_t EXCn) +{ + if ((EXCn < MAX_SYSTEM_EXCEPTION_NUM) && (EXCn != 0)) { + return SystemExceptionHandlers[EXCn]; + } else if (EXCn == NMI_EXCn) { + return SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]; + } else { + return 0; + } +} + +/** + * \brief Common NMI and Exception handler entry + * \details + * This function provided a command entry for NMI and exception. Silicon Vendor could modify + * this template implementation according to requirement. + * \remarks + * - RISCV provided common entry for all types of exception. This is proposed code template + * for exception entry function, Silicon Vendor could modify the implementation. + * - For the core_exception_handler template, we provided exception register function \ref Exception_Register_EXC + * which can help developer to register your exception handler for specific exception number. + */ +uint32_t core_exception_handler(unsigned long mcause, unsigned long sp) +{ + uint32_t EXCn = (uint32_t)(mcause & 0X00000fff); + EXC_HANDLER exc_handler; + + if ((EXCn < MAX_SYSTEM_EXCEPTION_NUM) && (EXCn > 0)) { + exc_handler = (EXC_HANDLER)SystemExceptionHandlers[EXCn]; + } else if (EXCn == NMI_EXCn) { + exc_handler = (EXC_HANDLER)SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]; + } else { + exc_handler = (EXC_HANDLER)system_default_exception_handler; + } + if (exc_handler != NULL) { + exc_handler(mcause, sp); + } + return 0; +} +/** @} */ /* End of Doxygen Group NMSIS_Core_ExceptionAndNMI */ + +/** + * \brief initialize eclic config + * \details + * Eclic need initialize after boot up, Vendor could also change the initialization + * configuration. + */ +void ECLIC_Init(void) +{ + /* TODO: Add your own initialization code here. This function will be called by main */ + ECLIC_SetMth(0); + ECLIC_SetCfgNlbits(__ECLIC_INTCTLBITS); +} + +/** + * \brief Initialize a specific IRQ and register the handler + * \details + * This function set vector mode, trigger mode and polarity, interrupt level and priority, + * assign handler for specific IRQn. + * \param [in] IRQn NMI interrupt handler address + * \param [in] shv \ref ECLIC_NON_VECTOR_INTERRUPT means non-vector mode, and \ref ECLIC_VECTOR_INTERRUPT is vector mode + * \param [in] trig_mode see \ref ECLIC_TRIGGER_Type + * \param [in] lvl interupt level + * \param [in] priority interrupt priority + * \param [in] handler interrupt handler, if NULL, handler will not be installed + * \return -1 means invalid input parameter. 0 means successful. + * \remarks + * - This function use to configure specific eclic interrupt and register its interrupt handler and enable its interrupt. + * - If the vector table is placed in read-only section(FLASHXIP mode), handler could not be installed + */ +int32_t ECLIC_Register_IRQ(IRQn_Type IRQn, uint8_t shv, ECLIC_TRIGGER_Type trig_mode, uint8_t lvl, uint8_t priority, void* handler) +{ + if ((IRQn > SOC_INT_MAX) || (shv > ECLIC_VECTOR_INTERRUPT) \ + || (trig_mode > ECLIC_NEGTIVE_EDGE_TRIGGER)) { + return -1; + } + + /* set interrupt vector mode */ + ECLIC_SetShvIRQ(IRQn, shv); + /* set interrupt trigger mode and polarity */ + ECLIC_SetTrigIRQ(IRQn, trig_mode); + /* set interrupt level */ + ECLIC_SetLevelIRQ(IRQn, lvl); + /* set interrupt priority */ + ECLIC_SetPriorityIRQ(IRQn, priority); + if (handler != NULL) { + /* set interrupt handler entry to vector table */ + ECLIC_SetVector(IRQn, (rv_csr_t)handler); + } + /* enable interrupt */ + ECLIC_EnableIRQ(IRQn); + return 0; +} +/** @} */ /* End of Doxygen Group NMSIS_Core_ExceptionAndNMI */ + +/** + * \brief early init function before main + * \details + * This function is executed right before main function. + * For RISC-V gnu toolchain, _init function might not be called + * by __libc_init_array function, so we defined a new function + * to do initialization + */ +void _premain_init(void) +{ + /* Initialize exception default handlers */ + Exception_Init(); + /* ECLIC initialization, mainly MTH and NLBIT */ + ECLIC_Init(); +} + +/** + * \brief finish function after main + * \param [in] status status code return from main + * \details + * This function is executed right after main function. + * For RISC-V gnu toolchain, _fini function might not be called + * by __libc_fini_array function, so we defined a new function + * to do initialization + */ +void _postmain_fini(int status) +{ + /* TODO: Add your own finishing code here, called after main */ +} + +/** + * \brief _init function called in __libc_init_array() + * \details + * This `__libc_init_array()` function is called during startup code, + * user need to implement this function, otherwise when link it will + * error init.c:(.text.__libc_init_array+0x26): undefined reference to `_init' + * \note + * Please use \ref _premain_init function now + */ +void _init(void) +{ + /* Don't put any code here, please use _premain_init now */ +} + +/** + * \brief _fini function called in __libc_fini_array() + * \details + * This `__libc_fini_array()` function is called when exit main. + * user need to implement this function, otherwise when link it will + * error fini.c:(.text.__libc_fini_array+0x28): undefined reference to `_fini' + * \note + * Please use \ref _postmain_fini function now + */ +void _fini(void) +{ + /* Don't put any code here, please use _postmain_fini now */ +} + +/** @} */ /* End of Doxygen Group NMSIS_Core_SystemAndClock */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h new file mode 100755 index 00000000..4f21b52f --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x1000000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11 +#define LED_PORT GPIO1 +#define LED_PIN 11 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 5 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD +#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk new file mode 100755 index 00000000..507db7f0 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DCPU_MIMXRT1011DAE5A +MCU_VARIANT = MIMXRT1011 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1011DAE5A + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1010 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c new file mode 100755 index 00000000..cd50a93d --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c @@ -0,0 +1,48 @@ +/* + * Copyright 2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1010_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 16u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h new file mode 100755 index 00000000..4be2760b --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h @@ -0,0 +1,267 @@ +/* + * Copyright 2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h new file mode 100755 index 00000000..932ce7fd --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -0,0 +1,51 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x1000000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21 +#define LED_PORT GPIO3 +#define LED_PIN 21 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 9 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk new file mode 100755 index 00000000..17fd25df --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DCPU_MIMXRT1015DAF5A +MCU_VARIANT = MIMXRT1015 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1015DAF5A + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1015 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c new file mode 100755 index 00000000..a396fe60 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c @@ -0,0 +1,48 @@ +/* + * Copyright 2018-2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1015_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 16u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h new file mode 100755 index 00000000..94af5a11 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018-2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h new file mode 100755 index 00000000..56ed5855 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -0,0 +1,51 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x800000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 +#define LED_PORT GPIO1 +#define LED_PIN 5 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk new file mode 100755 index 00000000..b15da1b6 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DCPU_MIMXRT1021DAG5A +MCU_VARIANT = MIMXRT1021 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1021DAG5A + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1020 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c new file mode 100755 index 00000000..6bafe195 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1020_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h new file mode 100755 index 00000000..f5e1aca5 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h new file mode 100755 index 00000000..928fbd72 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -0,0 +1,51 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x4000000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk new file mode 100755 index 00000000..9fd22910 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk @@ -0,0 +1,8 @@ +CFLAGS += -DCPU_MIMXRT1052DVL6B +MCU_VARIANT = MIMXRT1052 + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1050 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c new file mode 100755 index 00000000..af6eabc8 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c @@ -0,0 +1,55 @@ +/* + * Copyright 2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkbimxrt1050_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t hyperflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .columnAddressWidth = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .controllerMiscOption = + (1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) | + (1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable), + .sflashPadType = kSerialFlash_8Pads, + .serialClkFreq = kFlexSpiSerialClk_133MHz, + .sflashA1Size = 64u * 1024u * 1024u, + .dataValidTime = {16u, 16u}, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xA0, RADDR_DDR, FLEXSPI_8PAD, 0x18), + FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06), + FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), + }, + }, + .pageSize = 512u, + .sectorSize = 256u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = true, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h new file mode 100755 index 00000000..fe40e7ed --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ +#define __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h new file mode 100755 index 00000000..7fa37e33 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -0,0 +1,51 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x800000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk new file mode 100755 index 00000000..d0498dbb --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DCPU_MIMXRT1062DVL6A +MCU_VARIANT = MIMXRT1062 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1062xxx6A + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1060 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c new file mode 100755 index 00000000..5df2b7c1 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1060_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h new file mode 100755 index 00000000..28d7db57 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h new file mode 100755 index 00000000..5f51e91a --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x400000U) + +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk new file mode 100755 index 00000000..586d74fe --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DCPU_MIMXRT1064DVL6A +MCU_VARIANT = MIMXRT1064 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1064xxx6A + +# For flash-pyocd target +PYOCD_TARGET = mimxrt1064 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c new file mode 100755 index 00000000..bfb1c2d5 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1064_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h new file mode 100755 index 00000000..efdfe583 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.h b/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.h new file mode 100755 index 00000000..b3cc0a8c --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (2 * 1024 * 1024) + +// LED +#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 +#define LED_PORT GPIO2 +#define LED_PIN 3 +#define LED_STATE_ON 0 + +// no button +#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART6 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.mk b/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.mk new file mode 100755 index 00000000..0ad5ea5c --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.mk @@ -0,0 +1,10 @@ +CFLAGS += -DCPU_MIMXRT1062DVL6A +MCU_VARIANT = MIMXRT1062 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1062xxx6A + +# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli +# Make sure it is in your PATH +flash: $(BUILD)/$(PROJECT).hex + teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c new file mode 100755 index 00000000..7929906e --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h> + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 2u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h new file mode 100755 index 00000000..56068ec6 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__ +#define __TEENSY40_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/family.c b/tinyusb/hw/bsp/imxrt/family.c new file mode 100755 index 00000000..77a224a5 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/family.c @@ -0,0 +1,190 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +// needed by fsl_flexspi_nor_boot +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + + uint32_t freq; + if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */ + { + freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); + } + else + { + freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); + } + + LPUART_Init(UART_PORT, &uart_config, freq); + + //------------- USB0 -------------// + + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + // USB1 +// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); +// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy; + + // RT105x RT106x have dual USB controller. TODO support USB2 +#ifdef USBPHY1 + usb_phy = USBPHY1; +#else + usb_phy = USBPHY; +#endif + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +void USB_OTG2_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_int_handler(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/imxrt/family.mk b/tinyusb/hw/bsp/imxrt/family.mk new file mode 100755 index 00000000..a919d369 --- /dev/null +++ b/tinyusb/hw/bsp/imxrt/family.mk @@ -0,0 +1,54 @@ +UF2_FAMILY_ID = 0x4fb2d5bd +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough= + +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx_flexspi_nor.ld + +# TODO for net_lwip_webserver exmaple, but may not needed !! +LDFLAGS += \ + -Wl,--defsym,__stack_size__=0x800 \ + +SRC_C += \ + src/portable/nxp/transdimension/dcd_transdimension.c \ + $(MCU_DIR)/system_$(MCU_VARIANT).c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(SDK_DIR)/drivers/common/fsl_common.c \ + $(SDK_DIR)/drivers/igpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/project_template \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/igpio \ + $(TOP)/$(SDK_DIR)/drivers/lpuart + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + diff --git a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.h b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.h new file mode 100755 index 00000000..5ed5b75b --- /dev/null +++ b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.h @@ -0,0 +1,72 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// XTAL +#define XTAL_OscRateIn 12000000 +#define XTAL_RTCOscRateIn 32768 + +// LED +#define LED_PORT 0 +#define LED_PIN 25 + +// Wake Switch +#define BUTTON_PORT 0 +#define BUTTON_PIN 17 + +#define UART_PORT LPC_USART0 + +static inline void board_lpc15_pinmux_swm_init(void) +{ + // Pinmux + const PINMUX_GRP_T pinmuxing[] = + { + {0, 25, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_25-BREAK_CTRL-RED (low enable) + {0, 13, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_13-ISP_RX + {0, 18, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_18-ISP_TX + {1, 11, (IOCON_MODE_PULLDOWN | IOCON_DIGMODE_EN)}, // PIO1_11-ISP_1 (VBUS) + }; + + // Pin Mux + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + // SWIM + Chip_SWM_MovablePortPinAssign(SWM_USB_VBUS_I , 1, 11); + Chip_SWM_MovablePortPinAssign(SWM_UART0_RXD_I, 0, 13); + Chip_SWM_MovablePortPinAssign(SWM_UART0_TXD_O, 0, 18); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.mk b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.mk new file mode 100755 index 00000000..a3e04cfa --- /dev/null +++ b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.mk @@ -0,0 +1,6 @@ +LD_FILE = $(BOARD_PATH)/lpc1549.ld + +JLINK_DEVICE = LPC1549 + +# flash using pyocd +flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld new file mode 100755 index 00000000..6dd12ade --- /dev/null +++ b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld @@ -0,0 +1,246 @@ +/* + * GENERATED FILE - DO NOT EDIT + * Copyright (c) 2008-2013 Code Red Technologies Ltd, + * Copyright 2015, 2018-2019 NXP + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1549 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Oct 3, 2019 2:55:18 PM + */ + + +MEMORY +{ + /* Define each memory region */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ + Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ + Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ + __base_RAM = 0x2000000 ; /* RAM */ + __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ + __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ + __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ + __base_RAM2 = 0x2004000 ; /* RAM2 */ + __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ + __base_RAM3 = 0x2008000 ; /* RAM3 */ + __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash256 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash256 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash256 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash256 + __exidx_end = .; + + _etext = .; + + /* DATA section for Ram1_16 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$Ram1_16) + *(.data.$RAM2) + *(.data.$Ram1_16) + *(.data.$RAM2.*) + *(.data.$Ram1_16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > Ram1_16 AT>MFlash256 + /* DATA section for Ram2_4 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$Ram2_4) + *(.data.$RAM3) + *(.data.$Ram2_4) + *(.data.$RAM3.*) + *(.data.$Ram2_4.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > Ram2_4 AT>MFlash256 + /* MAIN DATA SECTION */ + .uninit_RESERVED (NOLOAD) : + { + . = ALIGN(4) ; + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > Ram0_16 + + /* Main DATA section (Ram0_16) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > Ram0_16 AT>MFlash256 + + /* BSS section for Ram1_16 */ + .bss_RAM2 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2) + *(.bss.$Ram1_16) + *(.bss.$RAM2.*) + *(.bss.$Ram1_16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > Ram1_16 + + /* BSS section for Ram2_4 */ + .bss_RAM3 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3) + *(.bss.$Ram2_4) + *(.bss.$RAM3.*) + *(.bss.$Ram2_4.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > Ram2_4 + + /* MAIN BSS SECTION */ + .bss : + { + . = ALIGN(4) ; + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > Ram0_16 + + /* NOINIT section for Ram1_16 */ + .noinit_RAM2 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM2) + *(.noinit.$Ram1_16) + *(.noinit.$RAM2.*) + *(.noinit.$Ram1_16.*) + . = ALIGN(4) ; + } > Ram1_16 + + /* NOINIT section for Ram2_4 */ + .noinit_RAM3 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM3) + *(.noinit.$Ram2_4) + *(.noinit.$RAM3.*) + *(.noinit.$Ram2_4.*) + . = ALIGN(4) ; + } > Ram2_4 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): + { + . = ALIGN(4) ; + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > Ram0_16 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_16 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc15/family.c b/tinyusb/hw/bsp/lpc15/family.c new file mode 100755 index 00000000..7f5984a3 --- /dev/null +++ b/tinyusb/hw/bsp/lpc15/family.c @@ -0,0 +1,130 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = XTAL_OscRateIn; +const uint32_t RTCOscRateIn = XTAL_RTCOscRateIn; + +// Invoked by startup code +void SystemInit(void) +{ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM1); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM2); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SWM); + Chip_SYSCTL_PeriphReset(RESET_IOCON); + + board_lpc15_pinmux_swm_init(); + + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + + // UART + Chip_Clock_SetUARTBaseClockRate(Chip_Clock_GetMainClockRate(), false); + Chip_UART_Init(UART_PORT); + Chip_UART_ConfigData(UART_PORT, UART_CFG_DATALEN_8 | UART_CFG_PARITY_NONE | UART_CFG_STOPLEN_1); + Chip_UART_SetBaud(UART_PORT, CFG_BOARD_UART_BAUDRATE); + Chip_UART_Enable(UART_PORT); + Chip_UART_TXEnable(UART_PORT); + + // USB: Setup PLL clock, and power + Chip_USB_Init(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + return Chip_UART_SendBlocking(UART_PORT, buf, len); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpc15/family.mk b/tinyusb/hw/bsp/lpc15/family.mk new file mode 100755 index 00000000..e80a3bc5 --- /dev/null +++ b/tinyusb/hw/bsp/lpc15/family.mk @@ -0,0 +1,39 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_LPC15XX \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# mcu driver cause following warnings +CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc15xx.c \ + $(MCU_DIR)/src/chip_15xx.c \ + $(MCU_DIR)/src/clock_15xx.c \ + $(MCU_DIR)/src/gpio_15xx.c \ + $(MCU_DIR)/src/iocon_15xx.c \ + $(MCU_DIR)/src/swm_15xx.c \ + $(MCU_DIR)/src/sysctl_15xx.c \ + $(MCU_DIR)/src/uart_15xx.c \ + $(MCU_DIR)/src/sysinit_15xx.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h new file mode 100755 index 00000000..b3a7bc44 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h @@ -0,0 +1,77 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +// Note: For USB Host demo, install JP4 +// WARNING: don't install JP4 when running as device + +#ifdef __cplusplus + extern "C" { +#endif + +// LED Red +#define LED_PORT 3 +#define LED_PIN 7 + +// ISP Button +#define BUTTON_PORT 0 +#define BUTTON_PIN 7 + +#define UART_DEV LPC_USART0 + +static inline void board_lpc18_pinmux(void) +{ + const PINMUX_GRP_T pinmuxing[] = + { + // LEDs + { 0x6, 9 , SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, + { 0x6, 11, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, + + // Button + { 0x2, 7, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0 }, + + // UART + { 0x06, 4, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, + { 0x02, 1, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1 }, + + // USB0 + //{ 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function + + //{ 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function + //{ 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION + {0x2, 5, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC4 }, + }; + + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk new file mode 100755 index 00000000..29b12913 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk @@ -0,0 +1,6 @@ +LD_FILE = $(BOARD_PATH)/lpc1837.ld + +# For flash-jlink target +JLINK_DEVICE = LPC18S37 + +flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld new file mode 100755 index 00000000..51fd1539 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -0,0 +1,404 @@ +/* + * GENERATED FILE - DO NOT EDIT + * Copyright (c) 2008-2013 Code Red Technologies Ltd, + * Copyright 2015, 2018-2019 NXP + * (c) NXP Semiconductors 2013-2021 + * Generated linker script file for LPC1837 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v11.2.0 [Build 4120] [2020-07-09] on Mar 3, 2021 4:22:49 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ +} + +/* Define a symbol for the top of each memory region */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + .text_Flash2 : ALIGN(4) + { + FILL(0xff) + *(.text_Flash2) /* for compatibility with previous releases */ + *(.text_MFlashB512) /* for compatibility with previous releases */ + *(.text.$Flash2) + *(.text.$MFlashB512) + *(.text_Flash2.*) /* for compatibility with previous releases */ + *(.text_MFlashB512.*) /* for compatibility with previous releases */ + *(.text.$Flash2.*) + *(.text.$MFlashB512.*) + *(.rodata.$Flash2) + *(.rodata.$MFlashB512) + *(.rodata.$Flash2.*) + *(.rodata.$MFlashB512.*) } > MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + .ARM.exidx : ALIGN(4) + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > MFlashA512 + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + PROVIDE(__start_data_RamLoc40 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2) + *(.data.$RamLoc40) + *(.data.$RAM2.*) + *(.data.$RamLoc40.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + PROVIDE(__end_data_RamLoc40 = .) ; + } > RamLoc40 AT>MFlashA512 + + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + PROVIDE(__start_data_RamAHB32 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3) + *(.data.$RamAHB32) + *(.data.$RAM3.*) + *(.data.$RamAHB32.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + PROVIDE(__end_data_RamAHB32 = .) ; + } > RamAHB32 AT>MFlashA512 + + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + PROVIDE(__start_data_RamAHB16 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4) + *(.data.$RamAHB16) + *(.data.$RAM4.*) + *(.data.$RamAHB16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + PROVIDE(__end_data_RamAHB16 = .) ; + } > RamAHB16 AT>MFlashA512 + + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + PROVIDE(__start_data_RamAHB_ETB16 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5) + *(.data.$RamAHB_ETB16) + *(.data.$RAM5.*) + *(.data.$RamAHB_ETB16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + PROVIDE(__end_data_RamAHB_ETB16 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + + /* MAIN DATA SECTION */ + .uninit_RESERVED (NOLOAD) : ALIGN(4) + { + _start_uninit_RESERVED = .; + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 AT> RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + PROVIDE(__start_data_RAM = .) ; + PROVIDE(__start_data_RamLoc32 = .) ; + *(vtable) + *(.ramfunc*) + KEEP(*(CodeQuickAccess)) + KEEP(*(DataQuickAccess)) + *(RamFunction) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + PROVIDE(__end_data_RAM = .) ; + PROVIDE(__end_data_RamLoc32 = .) ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + PROVIDE(__start_bss_RamLoc40 = .) ; + *(.bss.$RAM2) + *(.bss.$RamLoc40) + *(.bss.$RAM2.*) + *(.bss.$RamLoc40.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + PROVIDE(__end_bss_RamLoc40 = .) ; + } > RamLoc40 AT> RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + PROVIDE(__start_bss_RamAHB32 = .) ; + *(.bss.$RAM3) + *(.bss.$RamAHB32) + *(.bss.$RAM3.*) + *(.bss.$RamAHB32.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + PROVIDE(__end_bss_RamAHB32 = .) ; + } > RamAHB32 AT> RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + PROVIDE(__start_bss_RamAHB16 = .) ; + *(.bss.$RAM4) + *(.bss.$RamAHB16) + *(.bss.$RAM4.*) + *(.bss.$RamAHB16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + PROVIDE(__end_bss_RamAHB16 = .) ; + } > RamAHB16 AT> RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + PROVIDE(__start_bss_RamAHB_ETB16 = .) ; + *(.bss.$RAM5) + *(.bss.$RamAHB_ETB16) + *(.bss.$RAM5.*) + *(.bss.$RamAHB_ETB16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + PROVIDE(__end_bss_RamAHB_ETB16 = .) ; + } > RamAHB_ETB16 AT> RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + PROVIDE(__start_bss_RAM = .) ; + PROVIDE(__start_bss_RamLoc32 = .) ; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(__end_bss_RAM = .) ; + PROVIDE(__end_bss_RamLoc32 = .) ; + PROVIDE(end = .); + } > RamLoc32 AT> RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM2 = .) ; + PROVIDE(__start_noinit_RamLoc40 = .) ; + *(.noinit.$RAM2) + *(.noinit.$RamLoc40) + *(.noinit.$RAM2.*) + *(.noinit.$RamLoc40.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM2 = .) ; + PROVIDE(__end_noinit_RamLoc40 = .) ; + } > RamLoc40 AT> RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM3 = .) ; + PROVIDE(__start_noinit_RamAHB32 = .) ; + *(.noinit.$RAM3) + *(.noinit.$RamAHB32) + *(.noinit.$RAM3.*) + *(.noinit.$RamAHB32.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM3 = .) ; + PROVIDE(__end_noinit_RamAHB32 = .) ; + } > RamAHB32 AT> RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM4 = .) ; + PROVIDE(__start_noinit_RamAHB16 = .) ; + *(.noinit.$RAM4) + *(.noinit.$RamAHB16) + *(.noinit.$RAM4.*) + *(.noinit.$RamAHB16.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM4 = .) ; + PROVIDE(__end_noinit_RamAHB16 = .) ; + } > RamAHB16 AT> RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM5 = .) ; + PROVIDE(__start_noinit_RamAHB_ETB16 = .) ; + *(.noinit.$RAM5) + *(.noinit.$RamAHB_ETB16) + *(.noinit.$RAM5.*) + *(.noinit.$RamAHB_ETB16.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM5 = .) ; + PROVIDE(__end_noinit_RamAHB_ETB16 = .) ; + } > RamAHB_ETB16 AT> RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + PROVIDE(__start_noinit_RAM = .) ; + PROVIDE(__start_noinit_RamLoc32 = .) ; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + PROVIDE(__end_noinit_RAM = .) ; + PROVIDE(__end_noinit_RamLoc32 = .) ; + } > RamLoc32 AT> RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h new file mode 100755 index 00000000..6111da97 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h @@ -0,0 +1,94 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// PD_10 +#define LED_PORT 6 +#define LED_PIN 24 + +// P4_0 +#define BUTTON_PORT 2 +#define BUTTON_PIN 0 + +#define UART_DEV LPC_USART3 + +static inline void board_lpc18_pinmux(void) +{ + const PINMUX_GRP_T pinmuxing[] = + { + // LEDs + { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, + { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + + // Button + { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, + + // UART + { 2, 3, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, + { 2, 4, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, + + // USB0 + { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function + + { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function + { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION + }; + + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* Pin clock mux values, re-used structure, value in first index is meaningless */ + const PINMUX_GRP_T pinclockmuxing[] = + { + { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + }; + + /* Clock pins only, group field not used */ + for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) + { + Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); + } +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk new file mode 100755 index 00000000..0307a21d --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk @@ -0,0 +1,7 @@ +LD_FILE = $(BOARD_PATH)/lpc1857.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1857 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld new file mode 100755 index 00000000..9a308e34 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -0,0 +1,323 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1857 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 1:01:52 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ +} + +/* Define a symbol for the top of each memory region */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + .text_Flash2 : ALIGN(4) + { + FILL(0xff) + *(.text_Flash2*) /* for compatibility with previous releases */ + *(.text_MFlashB512*) /* for compatibility with previous releases */ + *(.text.$Flash2*) + *(.text.$MFlashB512*) + *(.rodata.$Flash2*) + *(.rodata.$MFlashB512*) + } > MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlashA512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2*) + *(.data.$RamLoc40*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamLoc40 AT>MFlashA512 + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamAHB32 AT>MFlashA512 + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4*) + *(.data.$RamAHB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + } > RamAHB16 AT>MFlashA512 + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5*) + *(.data.$RamAHB_ETB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamLoc40*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + *(.bss.$RAM4*) + *(.bss.$RamAHB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + } > RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + *(.bss.$RAM5*) + *(.bss.$RamAHB_ETB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + } > RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamLoc40*) + . = ALIGN(4) ; + } > RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM4*) + *(.noinit.$RamAHB16*) + . = ALIGN(4) ; + } > RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM5*) + *(.noinit.$RamAHB_ETB16*) + . = ALIGN(4) ; + } > RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc18/family.c b/tinyusb/hw/bsp/lpc18/family.c new file mode 100755 index 00000000..d74ebcd3 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/family.c @@ -0,0 +1,159 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_int_handler(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + + +/* System configuration variables used by chip driver */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + board_lpc18_pinmux(); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + //------------- UART -------------// + Chip_UART_Init(UART_DEV); + Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); + Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); + Chip_UART_TXEnable(UART_DEV); + + //------------- USB -------------// +#if CFG_TUSB_RHPORT0_MODE + Chip_USB0_Init(); +#endif + +#if CFG_TUSB_RHPORT1_MODE + Chip_USB1_Init(); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + //return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + uint8_t const* buf8 = (uint8_t const*) buf; + for(int i=0; i<len; i++) + { + while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {} + Chip_UART_SendByte(UART_DEV, buf8[i]); + } + + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpc18/family.mk b/tinyusb/hw/bsp/lpc18/family.mk new file mode 100755 index 00000000..3fed0b45 --- /dev/null +++ b/tinyusb/hw/bsp/lpc18/family.mk @@ -0,0 +1,35 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC18XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx + +SRC_C += \ + src/portable/nxp/transdimension/dcd_transdimension.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc18xx.c \ + $(MCU_DIR)/src/chip_18xx_43xx.c \ + $(MCU_DIR)/src/clock_18xx_43xx.c \ + $(MCU_DIR)/src/gpio_18xx_43xx.c \ + $(MCU_DIR)/src/sysinit_18xx_43xx.c \ + $(MCU_DIR)/src/uart_18xx_43xx.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR)/inc \ + $(TOP)/$(MCU_DIR)/inc/config_18xx + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h new file mode 100755 index 00000000..b1ad4258 --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 0 +#define LED_PIN 29 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 0 +#define BUTTON_PIN 24 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 0, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 1, IOCON_PIO_DIG_FUNC1_EN + +// USB0 VBUS +#define USB0_VBUS_PINMUX 1, 6, IOCON_PIO_DIG_FUNC7_EN + +// XTAL +//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk new file mode 100755 index 00000000..6e33d8cb --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk @@ -0,0 +1,13 @@ +MCU_VARIANT = LPC54114 +MCU_CORE = LPC54114_cm4 + +CFLAGS += -DCPU_LPC54114J256BD64_cm4 +LD_FILE = $(MCU_DIR)/gcc/LPC54114J256_cm4_flash.ld + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_cm4_hardabi.a + +JLINK_DEVICE = LPC54114J256_M4 +PYOCD_TARGET = LPC54114 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h new file mode 100755 index 00000000..67027751 --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 2 +#define LED_PIN 2 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 1 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN + +// USB0 VBUS +#define USB0_VBUS_PINMUX 0, 22, IOCON_PIO_DIG_FUNC7_EN + +// XTAL +//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk new file mode 100755 index 00000000..925374cc --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk @@ -0,0 +1,18 @@ +MCU_VARIANT = LPC54628 +MCU_CORE = LPC54628 + +PORT ?= 0 + +CFLAGS += -DCPU_LPC54628J512ET180 +CFLAGS += -Wno-error=double-promotion + +LD_FILE = $(MCU_DIR)/gcc/LPC54628J512_flash.ld + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a + +JLINK_DEVICE = LPC54628J512 +PYOCD_TARGET = LPC54628 + +#flash: flash-pyocd + +flash: flash-jlink
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc54/family.c b/tinyusb/hw/bsp/lpc54/family.c new file mode 100755 index 00000000..4789425a --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/family.c @@ -0,0 +1,228 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_power.h" +#include "fsl_iocon.h" +#include "fsl_usart.h" + +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +// IOCON pin mux +#define IOCON_PIO_DIGITAL_EN 0x80u // Enables digital function +#define IOCON_PIO_FUNC0 0x00u +#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1 +#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7 +#define IOCON_PIO_INPFILT_OFF 0x0100u // Input filter disabled +#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted +#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function +#define IOCON_PIO_MODE_PULLUP 0x10u +#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled +#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled + +// Digital pin function n enabled +#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC0) +#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC1) +#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC4) +#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC7) + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void USB1_IRQHandler(void) +{ + tud_int_handler(1); +} + +/**************************************************************** +name: BOARD_BootClockFROHF96M +outputs: +- {id: SYSTICK_clock.outFreq, value: 96 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} +sources: +- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} +******************************************************************/ +void BootClockFROHF96M(void) +{ + /*!< Set up the clock sources */ + /*!< Set up FRO */ + POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without + accidentally being below the voltage for current speed */ + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = 96000000U; +} + +void board_init(void) +{ + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iocon); + + // Init 96 MHz clock + BootClockFROHF96M(); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // Init all GPIO ports 54114 only has 2 ports. + GPIO_PortInit(GPIO, LED_PORT); + GPIO_PortInit(GPIO, BUTTON_PORT); + + // LED + IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); + gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; + GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); + + board_led_write(0); + + // Button + IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN | IOCON_PIO_MODE_PULLUP); + gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); + +#ifdef UART_DEV + // UART + IOCON_PinMuxSet(IOCON, UART_RX_PINMUX); + IOCON_PinMuxSet(IOCON, UART_TX_PINMUX); + + // Enable UART when debug log is on + CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0); + usart_config_t uart_config; + USART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + USART_Init(UART_DEV, &uart_config, 12000000); +#endif + + // USB + IOCON_PinMuxSet(IOCON, USB0_VBUS_PINMUX); + +#if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT + // LPC546xx and LPC540xx has OTG 1 FS + 1 HS rhports + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + // Port0 is Full Speed + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*< Turn on USB Phy */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference mannual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); /* enable usb0 host clock */ + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); /* disable usb0 host clock */ + + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbSrcFro, CLOCK_GetFroHfFreq()); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + // Port1 is High Speed + POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); + + /*According to reference mannual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ + USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ + + CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUsbPll, 0U); + #endif + +#else + // LPC5411x series only has full speed device + + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); // Turn on USB Phy + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + USART_WriteBlocking(UART_DEV, (uint8_t *)buf, len); + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpc54/family.mk b/tinyusb/hw/bsp/lpc54/family.mk new file mode 100755 index 00000000..600df6fd --- /dev/null +++ b/tinyusb/hw/bsp/lpc54/family.mk @@ -0,0 +1,54 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +ifeq ($(PORT), 1) + $(info "PORT1 High Speed") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + + # LPC55 Highspeed Port1 can only write to USB_SRAM region + CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' +else + $(info "PORT0 Full Speed") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/system_$(MCU_CORE).c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_power.c \ + $(MCU_DIR)/drivers/fsl_reset.c \ + $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_usart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F diff --git a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld new file mode 100755 index 00000000..6b5d852a --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld @@ -0,0 +1,234 @@ +/* +** ################################################################### +** Processors: LPC55S69JBD100_cm33_core0 +** LPC55S69JBD64_cm33_core0 +** LPC55S69JEV98_cm33_core0 +** +** Compiler: GNU C Compiler +** Reference manual: LPC55S6x/LPC55S2x/LPC552x User manual(UM11126) Rev.1.3 16 May 2019 +** Version: rev. 1.1, 2019-05-16 +** Build: b191008 +** +** Abstract: +** Linker file for the GNU C Compiler +** +** Copyright 2016 Freescale Semiconductor, Inc. +** Copyright 2016-2019 NXP +** All rights reserved. +** +** SPDX-License-Identifier: BSD-3-Clause +** +** http: www.nxp.com +** mail: support@nxp.com +** +** ################################################################### +*/ + + + +/* Entry Point */ +ENTRY(Reset_Handler) + +HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0800; +RPMSG_SHMEM_SIZE = DEFINED(__use_shmem__) ? 0x1800 : 0; + +/* Specify the memory areas */ +MEMORY +{ + m_interrupts (RX) : ORIGIN = 0x00010000, LENGTH = 0x00000200 + m_text (RX) : ORIGIN = 0x00010200, LENGTH = 0x0007FE00 + m_core1_image (RX) : ORIGIN = 0x00090000, LENGTH = 0x00008000 + m_data (RW) : ORIGIN = 0x20000000, LENGTH = 0x00033000 - RPMSG_SHMEM_SIZE + rpmsg_sh_mem (RW) : ORIGIN = 0x20033000 - RPMSG_SHMEM_SIZE, LENGTH = RPMSG_SHMEM_SIZE + m_usb_sram (RW) : ORIGIN = 0x40100000, LENGTH = 0x00004000 +} + +/* Define output sections */ +SECTIONS +{ + /* section for storing the secondary core image */ + .m0code : + { + . = ALIGN(4) ; + KEEP (*(.m0code)) + *(.m0code*) + . = ALIGN(4) ; + } > m_core1_image + + /* NOINIT section for rpmsg_sh_mem */ + .noinit_rpmsg_sh_mem (NOLOAD) : ALIGN(4) + { + __RPMSG_SH_MEM_START__ = .; + *(.noinit.$rpmsg_sh_mem*) + . = ALIGN(4) ; + __RPMSG_SH_MEM_END__ = .; + } > rpmsg_sh_mem + + /* The startup code goes first into internal flash */ + .interrupts : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } > m_interrupts + + /* The program code and other data goes into internal flash */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + } > m_text + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > m_text + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > m_text + + .ctors : + { + __CTOR_LIST__ = .; + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + } > m_text + + .dtors : + { + __DTOR_LIST__ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + } > m_text + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } > m_text + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } > m_text + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } > m_text + + __etext = .; /* define a global symbol at end of code */ + __DATA_ROM = .; /* Symbol is used by startup for data initialization */ + + .data : AT(__DATA_ROM) + { + . = ALIGN(4); + __DATA_RAM = .; + __data_start__ = .; /* create a global symbol at data start */ + *(.ramfunc*) /* for functions in ram */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + KEEP(*(.jcr*)) + . = ALIGN(4); + __data_end__ = .; /* define a global symbol at data end */ + } > m_data + + __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); + text_end = ORIGIN(m_text) + LENGTH(m_text); + ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") + + /* Uninitialized data section */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + . = ALIGN(4); + __START_BSS = .; + __bss_start__ = .; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + __END_BSS = .; + } > m_data + + .heap : + { + . = ALIGN(8); + __end__ = .; + PROVIDE(end = .); + __HeapBase = .; + . += HEAP_SIZE; + __HeapLimit = .; + __heap_limit = .; /* Add for _sbrk */ + } > m_data + + .stack : + { + . = ALIGN(8); + . += STACK_SIZE; + } > m_data + + m_usb_bdt (NOLOAD) : + { + . = ALIGN(512); + *(m_usb_bdt) + } > m_usb_sram + + m_usb_global (NOLOAD) : + { + *(m_usb_global) + } > m_usb_sram + + /* Initializes stack on the end of block */ + __StackTop = ORIGIN(m_data) + LENGTH(m_data); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + .ARM.attributes 0 : { *(.ARM.attributes) } + + ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") +} + diff --git a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.h b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.h new file mode 100755 index 00000000..975e74e9 --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 0 +#define LED_PIN 1 +#define LED_STATE_ON 1 + +// WAKE button +#define BUTTON_PORT 0 +#define BUTTON_PIN 5 +#define BUTTON_STATE_ACTIVE 0 + +// Number of neopixels +#define NEOPIXEL_NUMBER 2 +#define NEOPIXEL_PORT 0 +#define NEOPIXEL_PIN 27 +#define NEOPIXEL_CH 6 +#define NEOPIXEL_TYPE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0U, 29U, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0U, 30U, IOCON_PIO_DIG_FUNC1_EN + +// XTAL +#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.mk b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.mk new file mode 100755 index 00000000..d28700ca --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.mk @@ -0,0 +1,12 @@ +MCU_VARIANT = LPC55S69 +MCU_CORE = LPC55S69_cm33_core0 +PORT ?= 1 + +CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0 +LD_FILE = $(BOARD_PATH)/LPC55S69_cm33_core0_uf2.ld + +JLINK_DEVICE = LPC55S69 +PYOCD_TARGET = LPC55S69 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h new file mode 100755 index 00000000..f85701b0 --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h @@ -0,0 +1,56 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 1 +#define LED_PIN 6 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 1 +#define BUTTON_PIN 18 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN + +// XTAL +#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk new file mode 100755 index 00000000..ec0828e4 --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk @@ -0,0 +1,11 @@ +MCU_VARIANT = LPC55S28 +MCU_CORE = LPC55S28 +PORT ?= 1 + +CFLAGS += -DCPU_LPC55S28JBD100 + +JLINK_DEVICE = LPC55S28 +PYOCD_TARGET = LPC55S28 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h new file mode 100755 index 00000000..f85701b0 --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h @@ -0,0 +1,56 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 1 +#define LED_PIN 6 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 1 +#define BUTTON_PIN 18 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN + +// XTAL +#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk new file mode 100755 index 00000000..73edc88a --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk @@ -0,0 +1,11 @@ +MCU_VARIANT = LPC55S69 +MCU_CORE = LPC55S69_cm33_core0 +PORT ?= 1 + +CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0 + +JLINK_DEVICE = LPC55S69 +PYOCD_TARGET = LPC55S69 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.h b/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.h new file mode 100755 index 00000000..5e17cf9f --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.h @@ -0,0 +1,56 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 0 +#define LED_PIN 5 +#define LED_STATE_ON 0 + +// WAKE button (Dummy, use unused pin +#define BUTTON_PORT 0 +#define BUTTON_PIN 30 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 24, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 25, IOCON_PIO_DIG_FUNC1_EN + +// XTAL +#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.mk b/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.mk new file mode 100755 index 00000000..ceb1d0eb --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.mk @@ -0,0 +1,11 @@ +MCU_VARIANT = LPC55S69 +MCU_CORE = LPC55S69_cm33_core0 +PORT ?= 1 + +CFLAGS += -DCPU_LPC55S69JBD64_cm33_core0 + +JLINK_DEVICE = LPC55S69 +PYOCD_TARGET = LPC55S69 + +# flash using pyocd +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/family.c b/tinyusb/hw/bsp/lpc55/family.c new file mode 100755 index 00000000..4fc1f622 --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/family.c @@ -0,0 +1,283 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_power.h" +#include "fsl_iocon.h" +#include "fsl_usart.h" +#include "fsl_sctimer.h" +#include "sct_neopixel.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +// IOCON pin mux +#define IOCON_PIO_DIGITAL_EN 0x0100u // Enables digital function +#define IOCON_PIO_FUNC0 0x00u // Selects pin function 0 +#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1 +#define IOCON_PIO_FUNC4 0x04u // Selects pin function 4 +#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7 +#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted +#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function +#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled +#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled + +#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) // Digital pin function 0 enabled +#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) // Digital pin function 1 enabled +#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) // Digital pin function 2 enabled +#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) // Digital pin function 2 enabled + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void USB1_IRQHandler(void) +{ + tud_int_handler(1); +} + +/**************************************************************** +name: BOARD_BootClockFROHF96M +outputs: +- {id: SYSTICK_clock.outFreq, value: 96 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} +sources: +- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} +******************************************************************/ +void BootClockFROHF96M(void) +{ + /*!< Set up the clock sources */ + /*!< Set up FRO */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without + accidentally being below the voltage for current speed */ + + CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ + + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = 96000000U; +} + +void board_init(void) +{ + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iocon); + + // Init 96 MHz clock + BootClockFROHF96M(); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // Init all GPIO ports + GPIO_PortInit(GPIO, 0); + GPIO_PortInit(GPIO, 1); + + // LED + IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); + gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 1}; + GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); + + board_led_write(0); + +#ifdef NEOPIXEL_PIN + // Neopixel + static uint32_t pixelData[NEOPIXEL_NUMBER]; + IOCON_PinMuxSet(IOCON, NEOPIXEL_PORT, NEOPIXEL_PIN, IOCON_PIO_DIG_FUNC4_EN); + + sctpix_init(NEOPIXEL_TYPE); + sctpix_addCh(NEOPIXEL_CH, pixelData, NEOPIXEL_NUMBER); + sctpix_setPixel(NEOPIXEL_CH, 0, 0x100010); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x100010); + sctpix_show(); +#endif + + // Button + IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN); + gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); + +#ifdef UART_DEV + // UART + IOCON_PinMuxSet(IOCON, UART_RX_PINMUX); + IOCON_PinMuxSet(IOCON, UART_TX_PINMUX); + + // Enable UART when debug log is on + CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0); + usart_config_t uart_config; + USART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + USART_Init(UART_DEV, &uart_config, 12000000); +#endif + + // USB VBUS + /* PORT0 PIN22 configured as USB0_VBUS */ + IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN); + +#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + // Port0 is Full Speed + + /* Turn on USB0 Phy */ + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); + + /* reset the IP to make sure it's in reset state. */ + RESET_PeripheralReset(kUSB0D_RST_SHIFT_RSTn); + RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn); + RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn); + + // Enable USB Clock Adjustments to trim the FRO for the full speed controller + ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference mannual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock + + /* enable USB Device clock */ + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); +#endif + +#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + // Port1 is High Speed + + /* Turn on USB1 Phy */ + POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); + + /* reset the IP to make sure it's in reset state. */ + RESET_PeripheralReset(kUSB1H_RST_SHIFT_RSTn); + RESET_PeripheralReset(kUSB1D_RST_SHIFT_RSTn); + RESET_PeripheralReset(kUSB1_RST_SHIFT_RSTn); + RESET_PeripheralReset(kUSB1RAM_RST_SHIFT_RSTn); + + /* According to reference mannual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbh1); // enable usb0 host clock + + USBHSH->PORTMODE = USBHSH_PORTMODE_SW_PDCOM_MASK; // Put PHY powerdown under software control + USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK; + + CLOCK_DisableClock(kCLOCK_Usbh1); // disable usb0 host clock + + /* enable USB Device clock */ + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_UsbPhySrcExt, XTAL0_CLK_HZ); + CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUnused, 0U); + CLOCK_EnableClock(kCLOCK_UsbRam1); + + // Enable PHY support for Low speed device + LS via FS Hub + USBPHY->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + USBPHY->PWD = 0; + + USBPHY->CTRL_SET = USBPHY_CTRL_SET_ENAUTOCLR_CLKGATE_MASK; + USBPHY->CTRL_SET = USBPHY_CTRL_SET_ENAUTOCLR_PHY_PWD_MASK; + + // TX Timing +// uint32_t phytx = USBPHY->TX; +// phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); +// phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); +// USBPHY->TX = phytx; +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); + +#ifdef NEOPIXEL_PIN + if (state) { + sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010); + } else { + sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010); + } + sctpix_show(); +#endif +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + USART_WriteBlocking(UART_DEV, (uint8_t *)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpc55/family.mk b/tinyusb/hw/bsp/lpc55/family.mk new file mode 100755 index 00000000..4e8d65ce --- /dev/null +++ b/tinyusb/hw/bsp/lpc55/family.mk @@ -0,0 +1,67 @@ +UF2_FAMILY_ID = 0x2abc77ec +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += lib/sct_neopixel $(SDK_DIR) + +include $(TOP)/$(BOARD_PATH)/board.mk + +# Default to Highspeed PORT1 +PORT ?= 1 + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m33 \ + -mfloat-abi=hard \ + -mfpu=fpv5-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) + $(info "PORT1 High Speed") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + + # LPC55 Highspeed Port1 can only write to USB_SRAM region + CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' +else + $(info "PORT0 Full Speed") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal + +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) + +# All source paths should be relative to the top level. +LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_CORE)_flash.ld + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/system_$(MCU_CORE).c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_power.c \ + $(MCU_DIR)/drivers/fsl_reset.c \ + $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_usart.c \ + lib/sct_neopixel/sct_neopixel.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/sct_neopixel \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio \ + $(TOP)/$(SDK_DIR)/drivers/sctimer + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM33_NTZ/non_secure diff --git a/tinyusb/hw/bsp/lpcxpresso11u37/board.mk b/tinyusb/hw/bsp/lpcxpresso11u37/board.mk new file mode 100755 index 00000000..8fcda51e --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso11u37/board.mk @@ -0,0 +1,45 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0 \ + -nostdlib \ + -DCORE_M0 \ + -D__USE_LPCOPEN \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# mcu driver cause following warnings +CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc11uxx/lpc_chip_11uxx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc11u37.ld + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc11xx.c \ + $(MCU_DIR)/src/chip_11xx.c \ + $(MCU_DIR)/src/clock_11xx.c \ + $(MCU_DIR)/src/gpio_11xx_1.c \ + $(MCU_DIR)/src/iocon_11xx.c \ + $(MCU_DIR)/src/sysctl_11xx.c \ + $(MCU_DIR)/src/sysinit_11xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = LPC11U37/401 + +# flash using pyocd +flash: $(BUILD)/$(PROJECT).hex + pyocd flash -t lpc11u37 $< diff --git a/tinyusb/hw/bsp/lpcxpresso11u37/lpc11u37.ld b/tinyusb/hw/bsp/lpcxpresso11u37/lpc11u37.ld new file mode 100755 index 00000000..6a2dfb7f --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso11u37/lpc11u37.ld @@ -0,0 +1,195 @@ +/* + * GENERATED FILE - DO NOT EDIT + * Copyright (c) 2008-2013 Code Red Technologies Ltd, + * Copyright 2015, 2018-2019 NXP + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC11U37/401 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 6, 2019 12:16:06 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash128 = 0x0 ; /* MFlash128 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ + __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash128 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash128 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash128 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash128 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamUsb2 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamUsb2) + *(.data.$RAM2) + *(.data.$RamUsb2) + *(.data.$RAM2.*) + *(.data.$RamUsb2.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamUsb2 AT>MFlash128 + /* MAIN DATA SECTION */ + .uninit_RESERVED (NOLOAD) : + { + . = ALIGN(4) ; + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc8 + + /* Main DATA section (RamLoc8) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc8 AT>MFlash128 + + /* BSS section for RamUsb2 */ + .bss_RAM2 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2) + *(.bss.$RamUsb2) + *(.bss.$RAM2.*) + *(.bss.$RamUsb2.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamUsb2 + + /* MAIN BSS SECTION */ + .bss : + { + . = ALIGN(4) ; + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc8 + + /* NOINIT section for RamUsb2 */ + .noinit_RAM2 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM2) + *(.noinit.$RamUsb2) + *(.noinit.$RAM2.*) + *(.noinit.$RamUsb2.*) + . = ALIGN(4) ; + } > RamUsb2 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): + { + . = ALIGN(4) ; + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc8 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + ) + ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c b/tinyusb/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c new file mode 100755 index 00000000..11f1797a --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c @@ -0,0 +1,208 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//---------------------------------------------------------------- ----+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 1 +#define LED_PIN 24 +#define LED_STATE_ON 0 + +// Wake up Switch +#define BUTTON_PORT 0 +#define BUTTON_PIN 16 +#define BUTTON_STATE_ACTIVE 0 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +/* Pin muxing table, only items that need changing from their default pin + state are in this table. Not every pin is mapped. */ +/* IOCON pin definitions for pin muxing */ +typedef struct { + uint32_t port : 8; /* Pin port */ + uint32_t pin : 8; /* Pin number */ + uint32_t modefunc : 16; /* Function and mode */ +} PINMUX_GRP_T; + +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS + {0, 6, (IOCON_FUNC1 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ + + {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX + {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX +}; + +/* Setup system clocking */ +static void SystemSetupClocking(void) +{ + volatile int i; + + /* Powerup main oscillator */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSOSC_PD); + + /* Wait 200us for OSC to be stablized, no status + indication, dummy wait. */ + for (i = 0; i < 0x100; i++) {} + + /* Set system PLL input to main oscillator */ + Chip_Clock_SetSystemPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); + + /* Power down PLL to change the PLL divider ratio */ + Chip_SYSCTL_PowerDown(SYSCTL_POWERDOWN_SYSPLL_PD); + + /* Setup PLL for main oscillator rate (FCLKIN = 12MHz) * 4 = 48MHz + MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) + FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz + FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ + Chip_Clock_SetupSystemPLL(3, 1); + + /* Powerup system PLL */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSPLL_PD); + + /* Wait for PLL to lock */ + while (!Chip_Clock_IsSystemPLLLocked()) {} + + /* Set system clock divider to 1 */ + Chip_Clock_SetSysClockDiv(1); + + /* Setup FLASH access to 3 clocks */ + Chip_FMC_SetFLASHAccess(FLASHTIM_50MHZ_CPU); + + /* Set main clock source to the system PLL. This will drive 48MHz + for the main clock and 48MHz for the system clock */ + Chip_Clock_SetMainClockSource(SYSCTL_MAINCLKSRC_PLLOUT); + + /* Set USB PLL input to main oscillator */ + Chip_Clock_SetUSBPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); + /* Setup USB PLL (FCLKIN = 12MHz) * 4 = 48MHz + MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) + FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz + FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ + Chip_Clock_SetupUSBPLL(3, 1); + + /* Powerup USB PLL */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPLL_PD); + + /* Wait for PLL to lock */ + while (!Chip_Clock_IsUSBPLLLocked()) {} +} + +// Invoked by startup code +void SystemInit(void) +{ + SystemSetupClocking(); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_RAM1); + + /* Enable IOCON clock */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + for (uint32_t i = 0; i < (sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); i++) + { + Chip_IOCON_PinMuxSet(LPC_IOCON, pinmuxing[i].port, pinmuxing[i].pin, pinmuxing[i].modefunc); + } +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + + // USB: Setup PLL clock, and power + /* enable USB main clock */ + Chip_Clock_SetUSBClockSource(SYSCTL_USBCLKSRC_PLLOUT, 1); + /* Enable AHB clock to the USB block and USB RAM. */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USB); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USBRAM); + /* power UP USB Phy */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPAD_PD); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/board.mk b/tinyusb/hw/bsp/lpcxpresso11u68/board.mk new file mode 100755 index 00000000..922414f8 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso11u68/board.mk @@ -0,0 +1,42 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -nostdlib \ + -DCORE_M0PLUS \ + -D__VTOR_PRESENT=0 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc11u6x/lpc_chip_11u6x + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc11u68.ld + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc11u6x.c \ + $(MCU_DIR)/src/chip_11u6x.c \ + $(MCU_DIR)/src/clock_11u6x.c \ + $(MCU_DIR)/src/gpio_11u6x.c \ + $(MCU_DIR)/src/iocon_11u6x.c \ + $(MCU_DIR)/src/syscon_11u6x.c \ + $(MCU_DIR)/src/sysinit_11u6x.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = LPC11U68 + +# flash using pyocd +flash: $(BUILD)/$(PROJECT).hex + pyocd flash -t lpc11u68 $< diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/lpc11u68.ld b/tinyusb/hw/bsp/lpcxpresso11u68/lpc11u68.ld new file mode 100755 index 00000000..56d9e4b8 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso11u68/lpc11u68.ld @@ -0,0 +1,242 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC11U68 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 4:55:54 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ + __base_RAM3 = 0x20004000 ; /* RAM3 */ + __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash256 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash256 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash256 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash256 + __exidx_end = .; + + _etext = .; + + /* possible MTB section for Ram1_2 */ + .mtb_buffer_RAM2 (NOLOAD) : + { + KEEP(*(.mtb.$RAM2*)) + KEEP(*(.mtb.$Ram1_2*)) + } > Ram1_2 + + /* DATA section for Ram1_2 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$Ram1_2) + *(.data.$RAM2*) + *(.data.$Ram1_2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > Ram1_2 AT>MFlash256 + /* possible MTB section for Ram2USB_2 */ + .mtb_buffer_RAM3 (NOLOAD) : + { + KEEP(*(.mtb.$RAM3*)) + KEEP(*(.mtb.$Ram2USB_2*)) + } > Ram2USB_2 + + /* DATA section for Ram2USB_2 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$Ram2USB_2) + *(.data.$RAM3*) + *(.data.$Ram2USB_2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > Ram2USB_2 AT>MFlash256 + /* MAIN DATA SECTION */ + /* Default MTB section */ + .mtb_buffer_default (NOLOAD) : + { + KEEP(*(.mtb*)) + } > Ram0_32 + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > Ram0_32 + + /* Main DATA section (Ram0_32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > Ram0_32 AT>MFlash256 + + /* BSS section for Ram1_2 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$Ram1_2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > Ram1_2 + + /* BSS section for Ram2USB_2 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$Ram2USB_2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > Ram2USB_2 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > Ram0_32 + + /* NOINIT section for Ram1_2 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$Ram1_2*) + . = ALIGN(4) ; + } > Ram1_2 + + /* NOINIT section for Ram2USB_2 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$Ram2USB_2*) + . = ALIGN(4) ; + } > Ram2USB_2 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > Ram0_32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + ) + ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c new file mode 100755 index 00000000..e33a5c6e --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c @@ -0,0 +1,135 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 2 +#define LED_PIN 17 +#define LED_STATE_ON 0 + +// Wake up Switch +#define BUTTON_PORT 0 +#define BUTTON_PIN 16 +#define BUTTON_STATE_ACTIVE 0 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing table, only items that need changing from their default pin + state are in this table. Not every pin is mapped. */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS + {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX + {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX + {2, 0, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN + {2, 1, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT +}; + +// Invoked by startup code +void SystemInit(void) +{ + /* Enable IOCON clock */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + + // USB: Setup PLL clock, and power + Chip_USB_Init(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpcxpresso1347/board.mk b/tinyusb/hw/bsp/lpcxpresso1347/board.mk new file mode 100755 index 00000000..0d56a33a --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso1347/board.mk @@ -0,0 +1,44 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# startup.c and lpc_types.h cause following errors +CFLAGS += -Wno-error=strict-prototypes + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc1347.ld + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc13xx.c \ + $(MCU_DIR)/src/chip_13xx.c \ + $(MCU_DIR)/src/clock_13xx.c \ + $(MCU_DIR)/src/gpio_13xx_1.c \ + $(MCU_DIR)/src/iocon_13xx.c \ + $(MCU_DIR)/src/sysctl_13xx.c \ + $(MCU_DIR)/src/sysinit_13xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 + +# For flash-jlink target +JLINK_DEVICE = LPC1347 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpcxpresso1347/lpc1347.ld b/tinyusb/hw/bsp/lpcxpresso1347/lpc1347.ld new file mode 100755 index 00000000..42a4bb25 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso1347/lpc1347.ld @@ -0,0 +1,225 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1347 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:01:58 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash64 = 0x0 ; /* MFlash64 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ + __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash64 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash64 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash64 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash64 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamUsb2 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamUsb2) + *(.data.$RAM2*) + *(.data.$RamUsb2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamUsb2 AT>MFlash64 + /* DATA section for RamPeriph2 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamPeriph2) + *(.data.$RAM3*) + *(.data.$RamPeriph2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamPeriph2 AT>MFlash64 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc8 + + /* Main DATA section (RamLoc8) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc8 AT>MFlash64 + + /* BSS section for RamUsb2 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamUsb2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamUsb2 + + /* BSS section for RamPeriph2 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamPeriph2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamPeriph2 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc8 + + /* NOINIT section for RamUsb2 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamUsb2*) + . = ALIGN(4) ; + } > RamUsb2 + + /* NOINIT section for RamPeriph2 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamPeriph2*) + . = ALIGN(4) ; + } > RamPeriph2 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc8 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso1347/lpcxpresso1347.c b/tinyusb/hw/bsp/lpcxpresso1347/lpcxpresso1347.c new file mode 100755 index 00000000..a9a67ae3 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso1347/lpcxpresso1347.c @@ -0,0 +1,152 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 7 + +// Joytick Down if connected to LPCXpresso Base board +#define BUTTON_PORT 1 +#define BUTTON_PIN 20 + +//static const struct { +// uint8_t port; +// uint8_t pin; +//} buttons[] = +//{ +// {1, 22 }, // Joystick up +// {1, 20 }, // Joystick down +// {1, 23 }, // Joystick left +// {1, 21 }, // Joystick right +// {1, 19 }, // Joystick press +// {0, 1 }, // SW3 +//}; + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +/* Pin muxing table, only items that need changing from their default pin + state are in this table. */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ + {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ + {0, 3, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_3 used for USB_VBUS */ + {0, 6, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ + {0, 8, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_8 used for MISO0 */ + {0, 9, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_9 used for MOSI0 */ + {0, 11, (IOCON_FUNC2 | IOCON_ADMODE_EN | IOCON_FILT_DIS)}, /* PIO0_11 used for AD0 */ + {0, 18, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_18 used for RXD */ + {0, 19, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_19 used for TXD */ + {1, 29, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO1_29 used for SCK0 */ +}; + +// Invoked by startup code +void SystemInit(void) +{ + /* Enable IOCON clock */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + // USB: Setup PLL clock, and power + Chip_USB_Init(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/tinyusb/hw/bsp/lpcxpresso1769/board.mk b/tinyusb/hw/bsp/lpcxpresso1769/board.mk new file mode 100755 index 00000000..b69be39b --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso1769/board.mk @@ -0,0 +1,43 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ + -DRTC_EV_SUPPORT=0 + +# lpc_types.h cause following errors +CFLAGS += -Wno-error=strict-prototypes + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc1769.ld + +SRC_C += \ + src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ + $(MCU_DIR)/src/chip_17xx_40xx.c \ + $(MCU_DIR)/src/clock_17xx_40xx.c \ + $(MCU_DIR)/src/gpio_17xx_40xx.c \ + $(MCU_DIR)/src/iocon_17xx_40xx.c \ + $(MCU_DIR)/src/sysctl_17xx_40xx.c \ + $(MCU_DIR)/src/sysinit_17xx_40xx.c \ + $(MCU_DIR)/src/uart_17xx_40xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 + +# For flash-jlink target +JLINK_DEVICE = LPC1769 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpcxpresso1769/lpc1769.ld b/tinyusb/hw/bsp/lpcxpresso1769/lpc1769.ld new file mode 100755 index 00000000..d1c83d8e --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso1769/lpc1769.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1769 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamAHB32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamAHB32) + *(.data.$RAM2*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamAHB32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlash512 + + /* BSS section for RamAHB32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamAHB32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/tinyusb/hw/bsp/lpcxpresso1769/lpcxpresso1769.c new file mode 100755 index 00000000..101cc8a4 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso1769/lpcxpresso1769.c @@ -0,0 +1,209 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 22 +#define LED_STATE_ON 1 + +// JOYSTICK_DOWN if using LPCXpresso Base Board +#define BUTTON_PORT 0 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_UART3 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 0, IOCON_MODE_INACT | IOCON_FUNC2}, /* TXD3 */ + {0, 1, IOCON_MODE_INACT | IOCON_FUNC2}, /* RXD3 */ + {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, /* Led 0 */ + + /* Joystick buttons. */ +// {2, 3, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_UP */ + {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, /* JOYSTICK_DOWN */ +// {2, 4, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_LEFT */ +// {0, 16, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_RIGHT */ +// {0, 17, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_PRESS */ +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ + {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- + {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Soft Connect + + {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR (Host mode) + + // VBUS is not connected on this board, so leave the pin at default setting. + /// Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2); // USB VBUS +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); + + Chip_SYSCTL_SetFLASHAccess(FLASHTIM_100MHZ_CPU); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + PINSEL_CFG_Type PinCfg = + { + .Portnum = 0, + .Pinnum = 0, // TXD is P0.0 + .Funcnum = 2, + .OpenDrain = 0, + .Pinmode = 0 + }; + PINSEL_ConfigPin(&PinCfg); + + PinCfg.Portnum = 0; + PinCfg.Pinnum = 1; // RXD is P0.1 + PINSEL_ConfigPin(&PinCfg); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19, // AHB + Host + OTG +// 0x1B // Host + Device + OTG + AHB + }; + + uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; + + LPC_USB->OTGClkCtrl = clk_en; + while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); + +#if TUSB_OPT_HOST_ENABLED + // set portfunc to host !!! + LPC_USB->StCtrl = 0x3; // should be 1 +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +// return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/lpcxpresso51u68/board.mk b/tinyusb/hw/bsp/lpcxpresso51u68/board.mk new file mode 100755 index 00000000..98bef675 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso51u68/board.mk @@ -0,0 +1,52 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCPU_LPC51U68JBD64 \ + -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = $(SDK_DIR)/devices/LPC51U68 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/LPC51U68_flash.ld + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/system_LPC51U68.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_power.c \ + $(MCU_DIR)/drivers/fsl_reset.c \ + $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_usart.c + +INC += \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio + +SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +JLINK_DEVICE = LPC51U68 +PYOCD_TARGET = LPC51U68 + +# flash using pyocd (51u68 is not supported yet) +flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c b/tinyusb/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c new file mode 100755 index 00000000..6bade774 --- /dev/null +++ b/tinyusb/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c @@ -0,0 +1,179 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_power.h" +#include "fsl_iocon.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 29 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 0 +#define BUTTON_PIN 24 + +// IOCON pin mux +#define IOCON_PIO_DIGITAL_EN 0x80u /*!< Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */ +#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */ +#define IOCON_PIO_INPFILT_OFF 0x0100u /*!< Input filter disabled */ +#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */ + +/**************************************************************** +name: BOARD_BootClockFROHF96M +outputs: +- {id: SYSTICK_clock.outFreq, value: 96 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} +sources: +- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} +******************************************************************/ +void BootClockFROHF96M(void) +{ + /*!< Set up the clock sources */ + /*!< Set up FRO */ + POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without + accidentally being below the voltage for current speed */ + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 0U, true); /*!< Reset SYSTICKCLKDIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U, false); /*!< Set SYSTICKCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = 96000000U; +} + +void board_init(void) +{ + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iocon); + + // Enable GPIO0 clock + CLOCK_EnableClock(kCLOCK_Gpio0); + + // Init 96 MHz clock + BootClockFROHF96M(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + GPIO_PortInit(GPIO, LED_PORT); + GPIO_PortInit(GPIO, BUTTON_PORT); + + // LED + gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; + GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); + + // USB + const uint32_t port1_pin6_config = ( + IOCON_PIO_FUNC7 | /* Pin is configured as USB0_VBUS */ + IOCON_PIO_MODE_INACT | /* No addition pin function */ + IOCON_PIO_INV_DI | /* Input function is not inverted */ + IOCON_PIO_DIGITAL_EN | /* Enables digital function */ + IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ + IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ + ); + IOCON_PinMuxSet(IOCON, 1, 6, port1_pin6_config); /* PORT1 PIN6 (coords: 26) is configured as USB0_VBUS */ + + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */ + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return 1-GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/mbed1768/board.mk b/tinyusb/hw/bsp/mbed1768/board.mk new file mode 100755 index 00000000..e99df9f0 --- /dev/null +++ b/tinyusb/hw/bsp/mbed1768/board.mk @@ -0,0 +1,45 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ + -DRTC_EV_SUPPORT=0 + +# startup.c and lpc_types.h cause following errors +CFLAGS += -Wno-error=strict-prototypes + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/lpc1768.ld + +SRC_C += \ + src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ + $(MCU_DIR)/src/chip_17xx_40xx.c \ + $(MCU_DIR)/src/clock_17xx_40xx.c \ + $(MCU_DIR)/src/gpio_17xx_40xx.c \ + $(MCU_DIR)/src/iocon_17xx_40xx.c \ + $(MCU_DIR)/src/sysctl_17xx_40xx.c \ + $(MCU_DIR)/src/sysinit_17xx_40xx.c \ + $(MCU_DIR)/src/uart_17xx_40xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 + +# For flash-jlink target +JLINK_DEVICE = LPC1768 + +# flash using pyocd +flash: $(BUILD)/$(PROJECT).hex + pyocd flash -t lpc1768 $< + diff --git a/tinyusb/hw/bsp/mbed1768/lpc1768.ld b/tinyusb/hw/bsp/mbed1768/lpc1768.ld new file mode 100755 index 00000000..d1c83d8e --- /dev/null +++ b/tinyusb/hw/bsp/mbed1768/lpc1768.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1769 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamAHB32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamAHB32) + *(.data.$RAM2*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamAHB32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlash512 + + /* BSS section for RamAHB32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamAHB32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/mbed1768/mbed1768.c b/tinyusb/hw/bsp/mbed1768/mbed1768.c new file mode 100755 index 00000000..5495ed16 --- /dev/null +++ b/tinyusb/hw/bsp/mbed1768/mbed1768.c @@ -0,0 +1,197 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +#define LED_PORT 1 +#define LED_PIN 18 +#define LED_STATE_ON 1 + +// JOYSTICK_DOWN if using LPCXpresso Base Board +#define BUTTON_PORT 0 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_UART3 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 10000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, + {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ + {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- + {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Connect + + {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR + {1, 22, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PWRD + + /* VBUS is not connected on this board, so leave the pin at default setting. */ + /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + PINSEL_CFG_Type PinCfg = + { + .Portnum = 0, + .Pinnum = 0, // TXD is P0.0 + .Funcnum = 2, + .OpenDrain = 0, + .Pinmode = 0 + }; + PINSEL_ConfigPin(&PinCfg); + + PinCfg.Portnum = 0; + PinCfg.Pinnum = 1; // RXD is P0.1 + PINSEL_ConfigPin(&PinCfg); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19, // AHB + Host + OTG +// 0x1B // Host + Device + OTG + AHB + }; + + uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; + + LPC_USB->OTGClkCtrl = clk_en; + while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); + +#if TUSB_OPT_HOST_ENABLED + // set portfunc to host !!! + LPC_USB->StCtrl = 0x3; // should be 1 +#endif +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +// return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h b/tinyusb/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h new file mode 100755 index 00000000..ccfe321c --- /dev/null +++ b/tinyusb/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h @@ -0,0 +1,46 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT P1OUT +#define LED_PIN BIT0 +#define LED_STATE_ON 1 + +#define BUTTON_PORT P1IN +#define BUTTON_PIN BIT1 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/msp430/family.c b/tinyusb/hw/bsp/msp430/family.c new file mode 100755 index 00000000..4b8ae393 --- /dev/null +++ b/tinyusb/hw/bsp/msp430/family.c @@ -0,0 +1,218 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "msp430.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void __attribute__ ((interrupt(USB_UBM_VECTOR))) USB_UBM_ISR(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +uint32_t cnt = 0; + +static void SystemClock_Config(void) +{ + WDTCTL = WDTPW + WDTHOLD; // Disable watchdog. + + // Increase VCore to level 2- required for 16 MHz operation on this MCU. + PMMCTL0 = PMMPW + PMMCOREV_2; + + UCSCTL3 = SELREF__XT2CLK; // FLL is fed by XT2. + + // XT1 used for ACLK (default- not used in this demo) + P5SEL |= BIT4; // Required to enable XT1 + // Loop until XT1 fault flag is cleared. + do + { + UCSCTL7 &= ~XT1LFOFFG; + }while(UCSCTL7 & XT1LFOFFG); + + // XT2 is 4 MHz an external oscillator, use PLL to boost to 16 MHz. + P5SEL |= BIT2; // Required to enable XT2. + // Loop until XT2 fault flag is cleared + do + { + UCSCTL7 &= ~XT2OFFG; + }while(UCSCTL7 & XT2OFFG); + + // Kickstart the DCO into the correct frequency range, otherwise a + // fault will occur. + // FIXME: DCORSEL_6 should work according to datasheet params, but generates + // a fault. I am not sure why it faults. + UCSCTL1 = DCORSEL_7; + UCSCTL2 = FLLD_2 + 3; // DCO freq = D * (N + 1) * (FLLREFCLK / n) + // DCOCLKDIV freq = (N + 1) * (FLLREFCLK / n) + // N = 3, D = 2, thus DCO freq = 32 MHz. + + // MCLK configured for 16 MHz using XT2. + // SMCLK configured for 8 MHz using XT2. + UCSCTL4 |= SELM__DCOCLKDIV + SELS__DCOCLKDIV; + UCSCTL5 |= DIVM__16 + DIVS__2; + + // Now wait till everything's stabilized. + do + { + UCSCTL7 &= ~(XT2OFFG + XT1LFOFFG + DCOFFG); + SFRIFG1 &= ~OFIFG; + }while(SFRIFG1 & OFIFG); + + // Configure Timer A to use SMCLK as a source. Count 1000 ticks at 1 MHz. + TA0CCTL0 |= CCIE; + TA0CCR0 = 999; // 1000 ticks. + TA0CTL |= TASSEL_2 + ID_3 + MC__UP; // Use SMCLK, divide by 8, start timer. + + // Initialize USB power and PLL. + USBKEYPID = USBKEY; + + // VUSB enabled automatically. + // Wait two milliseconds to stabilize, per manual recommendation. + uint32_t ms_elapsed = board_millis(); + do + { + while((board_millis() - ms_elapsed) < 2); + }while(!(USBPWRCTL & USBBGVBV)); + + // USB uses XT2 (4 MHz) directly. Enable the PLL. + USBPLLDIVB |= USBPLL_SETCLK_4_0; + USBPLLCTL |= (UPFDEN | UPLLEN); + + // Wait until PLL locks. Check every 2ms, per manual. + ms_elapsed = board_millis(); + do + { + USBPLLIR &= ~USBOOLIFG; + while((board_millis() - ms_elapsed) < 2); + }while(USBPLLIR & USBOOLIFG); + + USBKEYPID = 0; +} + +uint32_t wait = 0; + +void board_init(void) +{ + __bis_SR_register(GIE); // Enable interrupts. + SystemClock_Config(); + + // Enable basic I/O. + P1DIR |= LED_PIN; // LED output. + P1REN |= BUTTON_PIN; // Internal resistor enable. + P1OUT |= BUTTON_PIN; // Pullup. + + // Enable the backchannel UART (115200) + P4DIR |= BIT5; + P4SEL |= (BIT5 | BIT4); + + UCA1CTL1 |= (UCSSEL__SMCLK | UCSWRST); // Hold in reset, use SMCLK. + UCA1BRW = 4; + UCA1MCTL |= (UCBRF_3 | UCBRS_5 | UCOS16); // Overampling mode, 115200 baud. + // Copied from manual. + UCA1CTL1 &= ~UCSWRST; + + // Set up USB pins. + USBKEYPID = USBKEY; + USBPHYCTL |= PUSEL; // Convert USB D+/D- pins to USB functionality. + USBKEYPID = 0; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if(state) + { + LED_PORT |= LED_PIN; + } + else + { + LED_PORT &= ~LED_PIN; + } +} + +uint32_t board_button_read(void) +{ + return ((P1IN & BIT1) >> 1) == BUTTON_STATE_ACTIVE; +} + +int board_uart_read(uint8_t * buf, int len) +{ + for(int i = 0; i < len; i++) + { + // Wait until something to receive (cleared by reading buffer). + while(!(UCA1IFG & UCRXIFG)); + buf[i] = UCA1RXBUF; + } + + return len; +} + +int board_uart_write(void const * buf, int len) +{ + const char * char_buf = (const char *) buf; + + for(int i = 0; i < len; i++) + { + // Wait until TX buffer is empty (cleared by writing buffer). + while(!(UCA1IFG & UCTXIFG)); + UCA1TXBUF = char_buf[i]; + } + + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void __attribute__ ((interrupt(TIMER0_A0_VECTOR))) TIMER0_A0_ISR (void) +{ + system_ticks++; + // TAxCCR0 CCIFG resets itself as soon as interrupt is invoked. +} + +uint32_t board_millis(void) +{ + uint32_t systick_mirror; + + // 32-bit update is not atomic on MSP430. We can read the bottom 16-bits, + // an interrupt occurs, updates _all_ 32 bits, and then we return a + // garbage value. And I've seen it happen! + TA0CCTL0 &= ~CCIE; + systick_mirror = system_ticks; + TA0CCTL0 |= CCIE; + + return systick_mirror; +} +#endif diff --git a/tinyusb/hw/bsp/msp430/family.mk b/tinyusb/hw/bsp/msp430/family.mk new file mode 100755 index 00000000..ceafa6ec --- /dev/null +++ b/tinyusb/hw/bsp/msp430/family.mk @@ -0,0 +1,35 @@ +CROSS_COMPILE = msp430-elf- +DEPS_SUBMODULES += hw/mcu/ti +SKIP_NANOLIB = 1 + +CFLAGS += \ + -D__MSP430F5529__ \ + -DCFG_TUSB_MCU=OPT_MCU_MSP430x5xx \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUD_ENDPOINT0_SIZE=8 + +# All source paths should be relative to the top level. +LD_FILE = hw/mcu/ti/msp430/msp430-gcc-support-files/include/msp430f5529.ld +LDINC += $(TOP)/hw/mcu/ti/msp430/msp430-gcc-support-files/include +LDFLAGS += $(addprefix -L,$(LDINC)) + +SRC_C += src/portable/ti/msp430x5xx/dcd_msp430x5xx.c + +INC += \ + $(TOP)/hw/mcu/ti/msp430/msp430-gcc-support-files/include \ + $(TOP)/$(BOARD_PATH) + +# export for libmsp430.so to same installation +ifneq ($(OS),Windows_NT) +export LD_LIBRARY_PATH=$(dir $(shell which MSP430Flasher)) +endif + +# flash target using TI MSP430-Flasher +# http://www.ti.com/tool/MSP430-FLASHER +# Please add its installation dir to PATH +flash: $(BUILD)/$(PROJECT).hex + MSP430Flasher -w $< -z [VCC] + +# flash target using mspdebug. +flash-mspdebug: $(BUILD)/$(PROJECT).elf + $(MSPDEBUG) tilib "prog $<" --allow-fw-update diff --git a/tinyusb/hw/bsp/ngx4330/board.mk b/tinyusb/hw/bsp/ngx4330/board.mk new file mode 100755 index 00000000..04c37fee --- /dev/null +++ b/tinyusb/hw/bsp/ngx4330/board.mk @@ -0,0 +1,45 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib \ + -DCORE_M4 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC43XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/ngx4330.ld + +SRC_C += \ + src/portable/nxp/transdimension/dcd_transdimension.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ + $(MCU_DIR)/src/chip_18xx_43xx.c \ + $(MCU_DIR)/src/clock_18xx_43xx.c \ + $(MCU_DIR)/src/gpio_18xx_43xx.c \ + $(MCU_DIR)/src/sysinit_18xx_43xx.c \ + $(MCU_DIR)/src/uart_18xx_43xx.c \ + $(MCU_DIR)/src/fpu_init.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc \ + $(TOP)/$(MCU_DIR)/inc/config_43xx + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = LPC4330 +JLINK_IF = swd + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/ngx4330/ngx4330.c b/tinyusb/hw/bsp/ngx4330/ngx4330.c new file mode 100755 index 00000000..b63f9b89 --- /dev/null +++ b/tinyusb/hw/bsp/ngx4330/ngx4330.c @@ -0,0 +1,264 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +#define LED_PORT 1 +#define LED_PIN 12 +#define LED_STATE_ON 0 + +#define BUTTON_PORT 0 +#define BUTTON_PIN 7 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_USART0 +#define BOARD_UART_PIN_PORT 0x0f +#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD +#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD + +/*------------------------------------------------------------------*/ +/* BOARD API + *------------------------------------------------------------------*/ + +/* System configuration variables used by chip driver */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +static const PINMUX_GRP_T pinmuxing[] = +{ + // LED P2.12 as GPIO 1.12 + {2, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_PULLDOWN | SCU_MODE_FUNC0)}, + + // Button P2.7 as GPIO 0.7 + {2, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, + + // USB + {2, 6, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB1_PWR_EN + {2, 5, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, // USB1_VBUS + {1, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB0_PWRN_EN + + // SPIFI + {3, 3, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI CLK */ + {3, 4, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D3 */ + {3, 5, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D2 */ + {3, 6, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D1 */ + {3, 7, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D0 */ + {3, 8, (SCU_PINIO_FAST | SCU_MODE_FUNC3)} /* SPIFI CS/SSEL */ +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; + +#if __FPU_USED == 1 + fpuInit(); +#endif +#endif // __USE_LPCOPEN + + // Set up pinmux + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + //------------- Set up clock -------------// + Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IRC, true, false); // change SPIFI to IRC during clock programming + LPC_SPIFI->CTRL |= SPIFI_CTRL_FBCLK(1); // and set FBCLK in SPIFI controller + + Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true); + + /* Reset and enable 32Khz oscillator */ + LPC_CREG->CREG0 &= ~((1 << 3) | (1 << 2)); + LPC_CREG->CREG0 |= (1 << 1) | (1 << 0); + + /* Setup a divider E for main PLL clock switch SPIFI clock to that divider. + Divide rate is based on CPU speed and speed of SPI FLASH part. */ +#if (MAX_CLOCK_FREQ > 180000000) + Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 5); +#else + Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 4); +#endif + Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IDIVE, true, false); + + /* Setup system base clocks and initial states. This won't enable and + disable individual clocks, but sets up the base clock sources for + each individual peripheral clock. */ + Chip_Clock_SetBaseClock(CLK_BASE_USB1, CLKIN_IDIVD, true, true); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1); + scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + UARTConfigStruct.Clock_Speed = 0; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + enum { + USBMODE_DEVICE = 2, + USBMODE_HOST = 3 + }; + + enum { + USBMODE_VBUS_LOW = 0, + USBMODE_VBUS_HIGH = 1 + }; + + /* USB0 + * For USB Device operation; insert jumpers in position 1-2 in JP17/JP18/JP19. GPIO28 controls USB + * connect functionality and LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted + * by default. LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS + * sensing. + * For USB Host operation; insert jumpers in position 2-3 in JP17/JP18/JP19. USB Host power is + * controlled via distribution switch U20 (found in schematic page 11). Signal GPIO26 is active low and + * enables +5V on VBUS2. LED35 light whenever +5V is present on VBUS2. GPIO55 is connected to + * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down + * resistors are always active + */ +#if CFG_TUSB_RHPORT0_MODE + Chip_USB0_Init(); +#endif + + /* USB1 + * When USB channel #1 is used as USB Host, 15Kohm pull-down resistors are needed on the USB data + * signals. These are activated inside the USB OTG chip (U31), and this has to be done via the I2C + * interface of GPIO52/GPIO53. + * J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB + * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default + * since SJ5 is normally connected between pin 1-2. LED34 lights green when +5V is available on J20. + * JP15 shall not be inserted. JP16 has no effect + * + * When USB channel #1 is used as USB Device, a 1.5Kohm pull-up resistor is needed on the USB DP + * data signal. There are two methods to create this. JP15 is inserted and the pull-up resistor is always + * enabled. Alternatively, the pull-up resistor is activated inside the USB OTG chip (U31), and this has to + * be done via the I2C interface of GPIO52/GPIO53. In the latter case, JP15 shall not be inserted. + * J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for + * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status + * of VBUS can be read via U31. + * JP16 shall not be inserted. + */ +#if CFG_TUSB_RHPORT1_MODE + Chip_USB1_Init(); + +// Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */ +// Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */ +#endif +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_int_handler(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + //return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/ngx4330/ngx4330.ld b/tinyusb/hw/bsp/ngx4330/ngx4330.ld new file mode 100755 index 00000000..7bd363f0 --- /dev/null +++ b/tinyusb/hw/bsp/ngx4330/ngx4330.ld @@ -0,0 +1,343 @@ +/* + * GENERATED FILE - DO NOT EDIT + * Copyright (c) 2008-2013 Code Red Technologies Ltd, + * Copyright 2015, 2018-2019 NXP + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC4330 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 9, 2019 12:09:49 PM + */ + +MEMORY +{ + /* Define each memory region */ + RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ + RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ +} + + /* Define a symbol for the top of each memory region */ + __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ + __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ + __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_SPIFI = 0x14000000 ; /* SPIFI */ + __base_Flash = 0x14000000 ; /* Flash */ + __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ + __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > SPIFI + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > SPIFI + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > SPIFI + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > SPIFI + __exidx_end = .; + + _etext = .; + + /* DATA section for RamLoc72 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc72) + *(.data.$RAM2) + *(.data.$RamLoc72) + *(.data.$RAM2.*) + *(.data.$RamLoc72.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamLoc72 AT>SPIFI + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3) + *(.data.$RamAHB32) + *(.data.$RAM3.*) + *(.data.$RamAHB32.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamAHB32 AT>SPIFI + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4) + *(.data.$RamAHB16) + *(.data.$RAM4.*) + *(.data.$RamAHB16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + } > RamAHB16 AT>SPIFI + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5) + *(.data.$RamAHB_ETB16) + *(.data.$RAM5.*) + *(.data.$RamAHB_ETB16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + } > RamAHB_ETB16 AT>SPIFI + /* MAIN DATA SECTION */ + .uninit_RESERVED (NOLOAD) : + { + . = ALIGN(4) ; + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc128 + + /* Main DATA section (RamLoc128) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc128 AT>SPIFI + + /* BSS section for RamLoc72 */ + .bss_RAM2 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2) + *(.bss.$RamLoc72) + *(.bss.$RAM2.*) + *(.bss.$RamLoc72.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamLoc72 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3) + *(.bss.$RamAHB32) + *(.bss.$RAM3.*) + *(.bss.$RamAHB32.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM4 = .) ; + *(.bss.$RAM4) + *(.bss.$RamAHB16) + *(.bss.$RAM4.*) + *(.bss.$RamAHB16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + } > RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM5 = .) ; + *(.bss.$RAM5) + *(.bss.$RamAHB_ETB16) + *(.bss.$RAM5.*) + *(.bss.$RamAHB_ETB16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + } > RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : + { + . = ALIGN(4) ; + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc128 + + /* NOINIT section for RamLoc72 */ + .noinit_RAM2 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM2) + *(.noinit.$RamLoc72) + *(.noinit.$RAM2.*) + *(.noinit.$RamLoc72.*) + . = ALIGN(4) ; + } > RamLoc72 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM3) + *(.noinit.$RamAHB32) + *(.noinit.$RAM3.*) + *(.noinit.$RamAHB32.*) + . = ALIGN(4) ; + } > RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM4) + *(.noinit.$RamAHB16) + *(.noinit.$RAM4.*) + *(.noinit.$RamAHB16.*) + . = ALIGN(4) ; + } > RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM5) + *(.noinit.$RamAHB_ETB16) + *(.noinit.$RAM5.*) + *(.noinit.$RamAHB_ETB16.*) + . = ALIGN(4) ; + } > RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): + { + . = ALIGN(4) ; + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc128 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h new file mode 100755 index 00000000..2c58e8fe --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 1) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN _PINNUM(1, 02) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk new file mode 100755 index 00000000..f31899eb --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk @@ -0,0 +1,10 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + +# flash using adafruit-nrfutil dfu +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld new file mode 100755 index 00000000..5314a4e9 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld @@ -0,0 +1,38 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 + + /* SRAM required by S132 depend on + * - Attribute Table Size + * - Vendor UUID count + * - Max ATT MTU + * - Concurrent connection peripheral + central + secure links + * - Event Len, HVN queue, Write CMD queue + */ + RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 +} + +SECTIONS +{ + . = ALIGN(4); + .svc_data : + { + PROVIDE(__start_svc_data = .); + KEEP(*(.svc_data)) + PROVIDE(__stop_svc_data = .); + } > RAM + + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM +} INSERT AFTER .data; + +INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld new file mode 100755 index 00000000..f570740b --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld @@ -0,0 +1,32 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x10000, LENGTH = 0xf0000 + RAM_NVIC (rwx) : ORIGIN = 0x20000000, LENGTH = 0x100 + RAM_CRASH_DATA (rwx) : ORIGIN = (0x20000000 + 0x100), LENGTH = 0x100 + RAM (rwx) : ORIGIN = ((0x20000000 + 0x100) + 0x100), LENGTH = (0x40000 - (0x100 + 0x100)) +} + +SECTIONS +{ + . = ALIGN(4); + .svc_data : + { + PROVIDE(__start_svc_data = .); + KEEP(*(.svc_data)) + PROVIDE(__stop_svc_data = .); + } > RAM + + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM +} INSERT AFTER .data; + +INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h new file mode 100755 index 00000000..d548e01c --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(0, 24) +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(1, 11) // D2 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN _PINNUM(1, 10) +#define UART_TX_PIN _PINNUM(1, 3) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk new file mode 100755 index 00000000..94babd82 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk @@ -0,0 +1,13 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# flash using bossac (as part of Nano33 BSP tools) +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(PROJECT).bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i -e -w $^ -R diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h new file mode 100755 index 00000000..a86c9dc7 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 14) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN _PINNUM(1, 15) +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_RX_PIN 30 +#define UART_TX_PIN 14 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk new file mode 100755 index 00000000..f31899eb --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk @@ -0,0 +1,10 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + +# flash using adafruit-nrfutil dfu +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld new file mode 100755 index 00000000..5314a4e9 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld @@ -0,0 +1,38 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 + + /* SRAM required by S132 depend on + * - Attribute Table Size + * - Vendor UUID count + * - Max ATT MTU + * - Concurrent connection peripheral + central + secure links + * - Event Len, HVN queue, Write CMD queue + */ + RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 +} + +SECTIONS +{ + . = ALIGN(4); + .svc_data : + { + PROVIDE(__start_svc_data = .); + KEEP(*(.svc_data)) + PROVIDE(__stop_svc_data = .); + } > RAM + + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM +} INSERT AFTER .data; + +INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h new file mode 100755 index 00000000..3208a948 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 15) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN _PINNUM(1, 02) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 24 +#define UART_TX_PIN 25 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk new file mode 100755 index 00000000..f31899eb --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk @@ -0,0 +1,10 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + +# flash using adafruit-nrfutil dfu +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld new file mode 100755 index 00000000..5314a4e9 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld @@ -0,0 +1,38 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 + + /* SRAM required by S132 depend on + * - Attribute Table Size + * - Vendor UUID count + * - Max ATT MTU + * - Concurrent connection peripheral + central + secure links + * - Event Len, HVN queue, Write CMD queue + */ + RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 +} + +SECTIONS +{ + . = ALIGN(4); + .svc_data : + { + PROVIDE(__start_svc_data = .); + KEEP(*(.svc_data)) + PROVIDE(__stop_svc_data = .); + } > RAM + + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM +} INSERT AFTER .data; + +INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h new file mode 100755 index 00000000..ece6e34c --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 9) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN _PINNUM(1, 02) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 24 +#define UART_TX_PIN 25 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk new file mode 100755 index 00000000..f31899eb --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk @@ -0,0 +1,10 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + +# flash using adafruit-nrfutil dfu +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld new file mode 100755 index 00000000..5314a4e9 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld @@ -0,0 +1,38 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 + + /* SRAM required by S132 depend on + * - Attribute Table Size + * - Vendor UUID count + * - Max ATT MTU + * - Concurrent connection peripheral + central + secure links + * - Event Len, HVN queue, Write CMD queue + */ + RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 +} + +SECTIONS +{ + . = ALIGN(4); + .svc_data : + { + PROVIDE(__start_svc_data = .); + KEEP(*(.svc_data)) + PROVIDE(__stop_svc_data = .); + } > RAM + + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM +} INSERT AFTER .data; + +INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h new file mode 100755 index 00000000..132173a8 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(0, 6) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN _PINNUM(0, 29) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 25 +#define UART_TX_PIN 24 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk new file mode 100755 index 00000000..f31899eb --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk @@ -0,0 +1,10 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ + +# flash using adafruit-nrfutil dfu +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld new file mode 100755 index 00000000..5314a4e9 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld @@ -0,0 +1,38 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 + + /* SRAM required by S132 depend on + * - Attribute Table Size + * - Vendor UUID count + * - Max ATT MTU + * - Concurrent connection peripheral + central + secure links + * - Event Len, HVN queue, Write CMD queue + */ + RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 +} + +SECTIONS +{ + . = ALIGN(4); + .svc_data : + { + PROVIDE(__start_svc_data = .); + KEEP(*(.svc_data)) + PROVIDE(__stop_svc_data = .); + } > RAM + + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM +} INSERT AFTER .data; + +INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h new file mode 100755 index 00000000..01dd1f24 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(0, 23) +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(0, 18) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 2 +#define UART_TX_PIN 3 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk new file mode 100755 index 00000000..3afa234a --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk @@ -0,0 +1,15 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# flash using Nordic nrfutil (pip3 install nrfutil) +# make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash +NRFUTIL = nrfutil + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ + +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200
\ No newline at end of file diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld new file mode 100755 index 00000000..78eddc9c --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld @@ -0,0 +1,13 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xE0000-0x1000 + RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 +} + + +INCLUDE "nrf_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/pca10056/board.h b/tinyusb/hw/bsp/nrf/boards/pca10056/board.h new file mode 100755 index 00000000..ab12d21a --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10056/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 11 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk new file mode 100755 index 00000000..be2ed331 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/board.h b/tinyusb/hw/bsp/nrf/boards/pca10059/board.h new file mode 100755 index 00000000..0810be64 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10059/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 8 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(1, 6) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk new file mode 100755 index 00000000..0b82ecdb --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk @@ -0,0 +1,15 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# flash using Nordic nrfutil (pip2 install nrfutil) +# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash +NRFUTIL = nrfutil + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ + +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld b/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld new file mode 100755 index 00000000..510bfdd8 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld @@ -0,0 +1,13 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000 + RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 +} + + +INCLUDE "nrf_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/pca10100/board.h b/tinyusb/hw/bsp/nrf/boards/pca10100/board.h new file mode 100755 index 00000000..88113303 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10100/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 11 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk new file mode 100755 index 00000000..5fba269b --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = nrf52833 +CFLAGS += -DNRF52833_XXAA + +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h new file mode 100755 index 00000000..dcf829d9 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN _PINNUM(1, 13) +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(0, 15) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 25 +#define UART_TX_PIN 24 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk new file mode 100755 index 00000000..be2ed331 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/nrf/family.c b/tinyusb/hw/bsp/nrf/family.c new file mode 100755 index 00000000..ed742daa --- /dev/null +++ b/tinyusb/hw/bsp/nrf/family.c @@ -0,0 +1,224 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" + +#include "nrfx.h" +#include "nrfx/hal/nrf_gpio.h" +#include "nrfx/drivers/include/nrfx_power.h" +#include "nrfx/drivers/include/nrfx_uarte.h" + +#ifdef SOFTDEVICE_PRESENT +#include "nrf_sdm.h" +#include "nrf_soc.h" +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ + +static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); + +// tinyusb function that handles power event (detected, ready, removed) +// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. +extern void tusb_hal_nrf_power_event(uint32_t event); + + +// nrf power callback, could be unused if SD is enabled or usb is disabled (board_test example) +TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) +{ + tusb_hal_nrf_power_event((uint32_t) event); +} + +void board_init(void) +{ + // stop LF clock just in case we jump from application without reset + NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; + + // Use Internal OSC to compatible with all boards + NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC; + NRF_CLOCK->TASKS_LFCLKSTART = 1UL; + + // LED + nrf_gpio_cfg_output(LED_PIN); + board_led_write(false); + + // Button + nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); + + // 1ms tick timer + SysTick_Config(SystemCoreClock/1000); + + // UART + nrfx_uarte_config_t uart_cfg = + { + .pseltxd = UART_TX_PIN, + .pselrxd = UART_RX_PIN, + .pselcts = NRF_UARTE_PSEL_DISCONNECTED, + .pselrts = NRF_UARTE_PSEL_DISCONNECTED, + .p_context = NULL, + .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE + .interrupt_priority = 7, + .hal_cfg = { + .hwfc = NRF_UARTE_HWFC_DISABLED, + .parity = NRF_UARTE_PARITY_EXCLUDED, + } + }; + + nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); + + //------------- USB -------------// +#if TUSB_OPT_DEVICE_ENABLED + // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice + // 2 is highest for application + NVIC_SetPriority(USBD_IRQn, 2); + + // USB power may already be ready at this time -> no event generated + // We need to invoke the handler based on the status initially + uint32_t usb_reg; + +#ifdef SOFTDEVICE_PRESENT + uint8_t sd_en = false; + sd_softdevice_is_enabled(&sd_en); + + if ( sd_en ) { + sd_power_usbdetected_enable(true); + sd_power_usbpwrrdy_enable(true); + sd_power_usbremoved_enable(true); + + sd_power_usbregstatus_get(&usb_reg); + }else +#endif + { + // Power module init + const nrfx_power_config_t pwr_cfg = { 0 }; + nrfx_power_init(&pwr_cfg); + + // Register tusb function as USB power handler + // cause cast-function-type warning + const nrfx_power_usbevt_config_t config = { .handler = power_event_handler }; + nrfx_power_usbevt_init(&config); + + nrfx_power_usbevt_enable(); + + usb_reg = NRF_POWER->USBREGSTATUS; + } + + if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); + if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; +} + +int board_uart_write(void const * buf, int len) +{ + return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +#ifdef SOFTDEVICE_PRESENT +// process SOC event from SD +uint32_t proc_soc(void) +{ + uint32_t soc_evt; + uint32_t err = sd_evt_get(&soc_evt); + + if (NRF_SUCCESS == err) + { + /*------------- usb power event handler -------------*/ + int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: + (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : + (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; + + if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); + } + + return err; +} + +uint32_t proc_ble(void) +{ + // do nothing with ble + return NRF_ERROR_NOT_FOUND; +} + +void SD_EVT_IRQHandler(void) +{ + // process BLE and SOC until there is no more events + while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) + { + + } +} + +void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) +{ + (void) id; + (void) pc; + (void) info; +} +#endif diff --git a/tinyusb/hw/bsp/nrf/family.mk b/tinyusb/hw/bsp/nrf/family.mk new file mode 100755 index 00000000..d1afd258 --- /dev/null +++ b/tinyusb/hw/bsp/nrf/family.mk @@ -0,0 +1,60 @@ +UF2_FAMILY_ID = 0xADA52840 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/nordic/nrfx + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ + -DCONFIG_GPIO_AS_PINRESET + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align + +# due to tusb_hal_nrf_power_event +GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) +ifeq ($(CMDEXE),1) + ifeq ($(shell if $(GCCVERSION) geq 8 echo 1), 1) + CFLAGS += -Wno-error=cast-function-type + endif +else + ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) + CFLAGS += -Wno-error=cast-function-type + endif +endif + +# All source paths should be relative to the top level. +LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/nrf52840_s140_v6.ld + +LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk + +SRC_C += \ + src/portable/nordic/nrf5x/dcd_nrf5x.c \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \ + hw/mcu/nordic/nrfx/mdk/system_$(MCU_VARIANT).c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/hw/mcu/nordic \ + $(TOP)/hw/mcu/nordic/nrfx \ + $(TOP)/hw/mcu/nordic/nrfx/mdk \ + $(TOP)/hw/mcu/nordic/nrfx/hal \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ + +SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S + +ASFLAGS += -D__HEAP_SIZE=0 + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = $(MCU_VARIANT)_xxaa diff --git a/tinyusb/hw/bsp/nutiny_nuc121s/board.mk b/tinyusb/hw/bsp/nutiny_nuc121s/board.mk new file mode 100755 index 00000000..a0a208ca --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc121s/board.mk @@ -0,0 +1,55 @@ +DEPS_SUBMODULES += hw/mcu/nuvoton + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0 \ + -D__ARM_FEATURE_DSP=0 \ + -DUSE_ASSERT=0 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_NUC121 + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/nuc121_flash.ld + +SRC_C += \ + src/portable/nuvoton/nuc121/dcd_nuc121.c \ + hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/adc.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/bpwm.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/fmc.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/i2c.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/pdma.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/pwm.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/spi_i2s.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/uart.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/usbd.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/usci_i2c.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/usci_spi.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/usci_uart.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/wdt.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/wwdt.c + +SRC_S += \ + hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = NUC121SC2AE + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_nuc121s/nuc121_flash.ld b/tinyusb/hw/bsp/nutiny_nuc121s/nuc121_flash.ld new file mode 100755 index 00000000..3966b276 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc121s/nuc121_flash.ld @@ -0,0 +1,195 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/tinyusb/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/tinyusb/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c new file mode 100755 index 00000000..7117a342 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c @@ -0,0 +1,121 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "NuMicro.h" +#include "clk.h" +#include "sys.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT PB +#define LED_PIN 4 +#define LED_PIN_IO PB4 +#define LED_STATE_ON 0 + +void board_init(void) +{ + /* Unlock protected registers */ + SYS_UnlockReg(); + + /*---------------------------------------------------------------------------------------------------------*/ + /* Init System Clock */ + /*---------------------------------------------------------------------------------------------------------*/ + + /* Enable Internal HIRC 48 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); + + /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select module clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + // LED + GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/tinyusb/hw/bsp/nutiny_nuc125s/board.mk b/tinyusb/hw/bsp/nutiny_nuc125s/board.mk new file mode 100755 index 00000000..bb56e42a --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc125s/board.mk @@ -0,0 +1,39 @@ +DEPS_SUBMODULES += hw/mcu/nuvoton + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0 \ + -D__ARM_FEATURE_DSP=0 \ + -DUSE_ASSERT=0 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_NUC121 + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/nuc125_flash.ld + +SRC_C += \ + src/portable/nuvoton/nuc121/dcd_nuc121.c \ + hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c + +SRC_S += \ + hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = NUC125SC2AE + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_nuc125s/nuc125_flash.ld b/tinyusb/hw/bsp/nutiny_nuc125s/nuc125_flash.ld new file mode 100755 index 00000000..3966b276 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc125s/nuc125_flash.ld @@ -0,0 +1,195 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/tinyusb/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/tinyusb/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c new file mode 100755 index 00000000..7117a342 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c @@ -0,0 +1,121 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "NuMicro.h" +#include "clk.h" +#include "sys.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT PB +#define LED_PIN 4 +#define LED_PIN_IO PB4 +#define LED_STATE_ON 0 + +void board_init(void) +{ + /* Unlock protected registers */ + SYS_UnlockReg(); + + /*---------------------------------------------------------------------------------------------------------*/ + /* Init System Clock */ + /*---------------------------------------------------------------------------------------------------------*/ + + /* Enable Internal HIRC 48 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); + + /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select module clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + // LED + GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/board.mk b/tinyusb/hw/bsp/nutiny_nuc126v/board.mk new file mode 100755 index 00000000..848b19f9 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc126v/board.mk @@ -0,0 +1,59 @@ +DEPS_SUBMODULES += hw/mcu/nuvoton + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0 \ + -D__ARM_FEATURE_DSP=0 \ + -DUSE_ASSERT=0 \ + -D__CORTEX_SC=0 \ + -DCFG_TUSB_MCU=OPT_MCU_NUC126 + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld + +SRC_C += \ + src/portable/nuvoton/nuc121/dcd_nuc121.c \ + hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/system_NUC126.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/acmp.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/adc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/crc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/ebi.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/fmc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/pdma.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/pwm.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/rtc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/sc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/scuart.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/spi.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/timer_pwm.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/uart.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/usbd.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/usci_spi.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/usci_uart.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/wdt.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/wwdt.c + +SRC_S += \ + hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Include \ + $(TOP)/hw/mcu/nuvoton/nuc126/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = NUC126VG4AE + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/nuc126_flash.ld b/tinyusb/hw/bsp/nutiny_nuc126v/nuc126_flash.ld new file mode 100755 index 00000000..b23890b4 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc126v/nuc126_flash.ld @@ -0,0 +1,195 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x40000 /* 256k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x5000 /* 20k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c new file mode 100755 index 00000000..da62e7bd --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c @@ -0,0 +1,153 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "NuMicro.h" +#include "clk.h" +#include "sys.h" + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT PC +#define LED_PIN 9 +#define LED_PIN_IO PC9 +#define LED_STATE_ON 0 + +#define CRYSTAL_LESS /* system will be 48MHz when defined, otherwise, system is 72MHz */ +#define HIRC48_AUTO_TRIM SYS_IRCTCTL1_REFCKSEL_Msk | (1UL << SYS_IRCTCTL1_LOOPSEL_Pos) | (2UL << SYS_IRCTCTL1_FREQSEL_Pos) +#define TRIM_INIT (SYS_BASE+0x118) + +void board_init(void) +{ + /* Unlock protected registers */ + SYS_UnlockReg(); + + /*---------------------------------------------------------------------------------------------------------*/ + /* Init System Clock */ + /*---------------------------------------------------------------------------------------------------------*/ + + /* Enable Internal RC 22.1184 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); + + /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); + +#ifndef CRYSTAL_LESS + /* Enable external XTAL 12 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk); + + /* Waiting for external XTAL clock ready */ + CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk); + + /* Set core clock */ + CLK_SetCoreClock(72000000); + + /* Use HIRC as UART clock source */ + CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); + + /* Use PLL as USB clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_PLL, CLK_CLKDIV0_USB(3)); + +#else + /* Enable Internal RC 48MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRC48EN_Msk); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRC48STB_Msk); + + /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC48, CLK_CLKDIV0_HCLK(1)); + + /* Use HIRC as UART clock source */ + CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); + + /* Use HIRC48 as USB clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC48, CLK_CLKDIV0_USB(1)); +#endif + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + // LED + GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc120/board.mk b/tinyusb/hw/bsp/nutiny_sdk_nuc120/board.mk new file mode 100755 index 00000000..90b3e91f --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_sdk_nuc120/board.mk @@ -0,0 +1,55 @@ +DEPS_SUBMODULES += hw/mcu/nuvoton + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_NUC120 + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld + +SRC_C += \ + src/portable/nuvoton/nuc120/dcd_nuc120.c \ + hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/acmp.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/adc.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/crc.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/fmc.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/i2c.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/i2s.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/pdma.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/ps2.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/pwm.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/rtc.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/sc.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/spi.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/uart.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/usbd.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/wdt.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/wwdt.c + +SRC_S += \ + hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Include \ + $(TOP)/hw/mcu/nuvoton/nuc100_120/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = NUC120LE3 + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld b/tinyusb/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld new file mode 100755 index 00000000..cab12c8b --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld @@ -0,0 +1,195 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x20000 /* 128k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x4000 /* 16k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/tinyusb/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c new file mode 100755 index 00000000..0d78116b --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c @@ -0,0 +1,133 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "NUC100Series.h" +#include "clk.h" +#include "sys.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT PB +#define LED_PIN 0 +#define LED_PIN_IO PB0 +#define LED_STATE_ON 0 + +void board_init(void) +{ + SYS_UnlockReg(); + + /* Enable Internal RC 22.1184 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCON_OSC22M_EN_Msk); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_CLKSTATUS_OSC22M_STB_Msk); + + /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLK_S_HIRC, CLK_CLKDIV_HCLK(1)); + + /* Enable external XTAL 12 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCON_XTL12M_EN_Msk); + + /* Waiting for external XTAL clock ready */ + CLK_WaitClockReady(CLK_CLKSTATUS_XTL12M_STB_Msk); + + /* Set core clock */ + CLK_SetCoreClock(48000000); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select module clock source */ + CLK_SetModuleClock(USBD_MODULE, 0, CLK_CLKDIV_USB(1)); + + SYS_LockReg(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_PMD_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ +#if 0 + /* this would be the simplest solution... *IF* the part supported the pin data interface */ + LED_PIN_IO = (state) ? LED_STATE_ON : (1-LED_STATE_ON); +#else + /* if the part's *PDIO pin data registers don't work, a more elaborate approach is needed */ + uint32_t irq_state = __get_PRIMASK(); + __disable_irq(); + uint32_t current = LED_PORT->DOUT & ~(1UL << LED_PIN); + LED_PORT->DOUT = current | (((state) ? LED_STATE_ON : (1UL-LED_STATE_ON)) << LED_PIN); + __set_PRIMASK(irq_state); +#endif +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc505/board.mk b/tinyusb/hw/bsp/nutiny_sdk_nuc505/board.mk new file mode 100755 index 00000000..e8514347 --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -0,0 +1,60 @@ +DEPS_SUBMODULES += hw/mcu/nuvoton + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_NUC505 + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld + +SRC_C += \ + src/portable/nuvoton/nuc505/dcd_nuc505.c \ + hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/system_NUC505Series.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/adc.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/i2c.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/i2s.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/pwm.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/rtc.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/spi.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/spim.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/uart.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/wdt.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/wwdt.c + +SRC_S += \ + hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Include \ + $(TOP)/hw/mcu/nuvoton/nuc505/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc505/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = NUC505YO13Y + +# Note +# To be able to program the SPI flash, it need to boot with ICP mode "1011". +# However, in ICP mode, opencod cannot establish connection to the mcu. +# Therefore, there is no easy command line flash for NUC505 +# It is probably better to just use Nuvoton NuMicro ICP programming on windows to program the board +# - 1111 "SPI" (run from internal flash) +# - 1110 "USB" (mass storage emulator that accepts a .bin file) +# - 0111 "ICE-SPI" (allow external debugger access, but may not be programmable) +# - 1011 ICP mode (programmable via NuMicro ICP programming tool) + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM4.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld b/tinyusb/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld new file mode 100755 index 00000000..53d385cd --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld @@ -0,0 +1,199 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000 /* 512k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x20000 /* 128k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .startup : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + KEEP(*(.preinit)) + + KEEP(*(.init)) + KEEP(*(.fini)) + + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + + *(.text*) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/tinyusb/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c new file mode 100755 index 00000000..49e66d2d --- /dev/null +++ b/tinyusb/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c @@ -0,0 +1,129 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "NUC505Series.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT PC +#define LED_PIN 3 +#define LED_STATE_ON 0 + +void board_init(void) +{ + /* Enable XTAL */ + CLK->PWRCTL |= CLK_PWRCTL_HXTEN_Msk; + + CLK_SetCoreClock(96000000); + + /* Set PCLK divider */ + CLK_SetModuleClock(PCLK_MODULE, 0, 1); + + /* Update System Core Clock */ + SystemCoreClockUpdate(); + + /* Enable USB IP clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select USB IP clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_USBD_SRC_EXT, 0); + + CLK_SetModuleClock(PCLK_MODULE, 0, 1); + + /* Enable PHY */ + USBD_ENABLE_PHY(); + /* wait PHY clock ready */ + while (1) { + USBD->EP[EPA].EPMPS = 0x20; + if (USBD->EP[EPA].EPMPS == 0x20) + break; + } + + /* Force SE0, and then clear it to connect*/ + USBD_SET_SE0(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(96000000 / 1000); +#endif + + GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + uint32_t current = (state) ? LED_STATE_ON : (1-LED_STATE_ON); + current <<= LED_PIN; + uint32_t irq_state = __get_PRIMASK(); + __disable_irq(); + current |= LED_PORT->DOUT & ~(1UL << LED_PIN); + LED_PORT->DOUT = current; + __set_PRIMASK(irq_state); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/tinyusb/hw/bsp/rp2040/board.h b/tinyusb/hw/bsp/rp2040/board.h new file mode 100755 index 00000000..237f29dc --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef PICO_DEFAULT_LED_PIN +#define LED_PIN PICO_DEFAULT_LED_PIN +#define LED_STATE_ON (!(PICO_DEFAULT_LED_PIN_INVERTED)) +#endif + +// Button pin is BOOTSEL which is flash CS pin +#define BUTTON_BOOTSEL +#define BUTTON_STATE_ACTIVE 0 + +#if defined(PICO_DEFAULT_UART_TX_PIN) && defined(PICO_DEFAULT_UART_RX_PIN) && defined(PICO_DEFAULT_UART) +#define UART_DEV PICO_DEFAULT_UART +#define UART_TX_PIN PICO_DEFAULT_UART_TX_PIN +#define UART_RX_PIN PICO_DEFAULT_UART_RX_PIN +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake b/tinyusb/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake new file mode 100755 index 00000000..e527a8ce --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake @@ -0,0 +1 @@ +set(PICO_BOARD adafruit_feather_rp2040)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake b/tinyusb/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake new file mode 100755 index 00000000..3fd2dd06 --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake @@ -0,0 +1 @@ +set(PICO_BOARD adafruit_itsybitsy_rp2040)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake b/tinyusb/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake new file mode 100755 index 00000000..469929c5 --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake @@ -0,0 +1 @@ +set(PICO_BOARD adafruit_qtpy_rp2040)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/boards/pico_sdk/board.cmake b/tinyusb/hw/bsp/rp2040/boards/pico_sdk/board.cmake new file mode 100755 index 00000000..d57cbe52 --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/boards/pico_sdk/board.cmake @@ -0,0 +1 @@ +# This builds with settings based purely on the current PICO_BOARD set via the SDK diff --git a/tinyusb/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/tinyusb/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake new file mode 100755 index 00000000..8280c835 --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake @@ -0,0 +1 @@ +set(PICO_BOARD pico)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/family.c b/tinyusb/hw/bsp/rp2040/family.c new file mode 100755 index 00000000..10ead277 --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/family.c @@ -0,0 +1,199 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "pico/stdlib.h" +#include "pico/binary_info.h" +#include "hardware/gpio.h" +#include "hardware/sync.h" +#include "hardware/structs/ioqspi.h" +#include "hardware/structs/sio.h" + +#include "bsp/board.h" +#include "board.h" + +#ifdef BUTTON_BOOTSEL +// This example blinks the Picoboard LED when the BOOTSEL button is pressed. +// +// Picoboard has a button attached to the flash CS pin, which the bootrom +// checks, and jumps straight to the USB bootcode if the button is pressed +// (pulling flash CS low). We can check this pin in by jumping to some code in +// SRAM (so that the XIP interface is not required), floating the flash CS +// pin, and observing whether it is pulled low. +// +// This doesn't work if others are trying to access flash at the same time, +// e.g. XIP streamer, or the other core. +bool __no_inline_not_in_flash_func(get_bootsel_button)() { + const uint CS_PIN_INDEX = 1; + + // Must disable interrupts, as interrupt handlers may be in flash, and we + // are about to temporarily disable flash access! + uint32_t flags = save_and_disable_interrupts(); + + // Set chip select to Hi-Z + hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, + GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, + IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); + + // Note we can't call into any sleep functions in flash right now + for (volatile int i = 0; i < 1000; ++i); + + // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. + // Note the button pulls the pin *low* when pressed. + bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX)); + + // Need to restore the state of chip select, else we are going to have a + // bad time when we return to code in flash! + hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, + GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, + IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); + + restore_interrupts(flags); + + return button_state; +} +#endif + +//------------- Segger RTT retarget -------------// +#if defined(LOGGER_RTT) + +// Logging with RTT +// - If RTT Control Block is not found by 'Auto Detection` try to use 'Search Range` with '0x20000000 0x10000' +// - SWD speed is rather slow around 1000Khz + +#include "pico/stdio/driver.h" +#include "SEGGER_RTT.h" + +static void stdio_rtt_write (const char *buf, int length) +{ + SEGGER_RTT_Write(0, buf, length); +} + +static int stdio_rtt_read (char *buf, int len) +{ + return SEGGER_RTT_Read(0, buf, len); +} + +static stdio_driver_t stdio_rtt = +{ + .out_chars = stdio_rtt_write, + .out_flush = NULL, + .in_chars = stdio_rtt_read +}; + +void stdio_rtt_init(void) +{ + stdio_set_driver_enabled(&stdio_rtt, true); +} + +#endif + +#ifdef UART_DEV +static uart_inst_t *uart_inst; +#endif + +void board_init(void) +{ +#ifdef LED_PIN + bi_decl(bi_1pin_with_name(LED_PIN, "LED")); + gpio_init(LED_PIN); + gpio_set_dir(LED_PIN, GPIO_OUT); +#endif + + // Button +#ifndef BUTTON_BOOTSEL +#endif + +#if defined(UART_DEV) && defined(LIB_PICO_STDIO_UART) + bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART)); + uart_inst = uart_get_instance(UART_DEV); + stdio_uart_init_full(uart_inst, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN); +#endif + +#if defined(LOGGER_RTT) + stdio_rtt_init(); +#endif + + // todo probably set up device mode? +#if TUSB_OPT_DEVICE_ENABLED + +#endif + +#if TUSB_OPT_HOST_ENABLED + // set portfunc to host !!! +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ +#ifdef LED_PIN + gpio_put(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +#endif +} + +uint32_t board_button_read(void) +{ +#ifdef BUTTON_BOOTSEL + return BUTTON_STATE_ACTIVE == get_bootsel_button(); +#else + return 0; +#endif +} + +int board_uart_read(uint8_t* buf, int len) +{ +#ifdef UART_DEV + for(int i=0;i<len;i++) { + buf[i] = uart_getc(uart_inst); + } + return len; +#else + return 0; +#endif +} + +int board_uart_write(void const * buf, int len) +{ +#ifdef UART_DEV + char const* bufch = (char const*) buf; + for(int i=0;i<len;i++) { + uart_putc(uart_inst, bufch[i]); + } + return len; +#else + return 0; +#endif +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +// rp2040 implementation will install approriate handler when initializing +// tinyusb. There is no need to forward IRQ from application +//--------------------------------------------------------------------+ diff --git a/tinyusb/hw/bsp/rp2040/family.cmake b/tinyusb/hw/bsp/rp2040/family.cmake new file mode 100755 index 00000000..41960b6c --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/family.cmake @@ -0,0 +1,154 @@ +cmake_minimum_required(VERSION 3.13) +if (NOT TARGET _rp2040_family_inclusion_marker) + add_library(_rp2040_family_inclusion_marker INTERFACE) + + if (NOT BOARD) + message("BOARD not specified, defaulting to pico_sdk") + set(BOARD pico_sdk) + endif() + + # add the SDK in case we are standalone tinyusb example (noop if already present) + include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake) + + # include basic family CMake functionality + set(FAMILY_MCUS RP2040) + + include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + + # TOP is absolute path to root directory of TinyUSB git repo + set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") + get_filename_component(TOP "${TOP}" REALPATH) + + if (NOT PICO_TINYUSB_PATH) + set(PICO_TINYUSB_PATH ${TOP}) + endif() + + # Base config for both device and host; wrapped by SDK's tinyusb_common + add_library(tinyusb_common_base INTERFACE) + + target_sources(tinyusb_common_base INTERFACE + ${TOP}/src/tusb.c + ${TOP}/src/common/tusb_fifo.c + ) + + target_include_directories(tinyusb_common_base INTERFACE + ${TOP}/src + ${TOP}/src/common + ${TOP}/hw + ) + + target_link_libraries(tinyusb_common_base INTERFACE + hardware_structs + hardware_irq + hardware_resets + pico_sync + ) + + set(TINYUSB_DEBUG_LEVEL 0) + if (CMAKE_BUILD_TYPE STREQUAL "Debug") + message("Compiling TinyUSB with CFG_TUSB_DEBUG=1") + set(TINYUSB_DEBUG_LEVEL 1) + endif () + + target_compile_definitions(tinyusb_common_base INTERFACE + CFG_TUSB_MCU=OPT_MCU_RP2040 + CFG_TUSB_OS=OPT_OS_PICO + CFG_TUSB_DEBUG=${TINYUSB_DEBUG_LEVEL} + ) + + # Base config for device mode; wrapped by SDK's tinyusb_device + add_library(tinyusb_device_base INTERFACE) + target_sources(tinyusb_device_base INTERFACE + ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c + ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c + ${TOP}/src/device/usbd.c + ${TOP}/src/device/usbd_control.c + ${TOP}/src/class/audio/audio_device.c + ${TOP}/src/class/cdc/cdc_device.c + ${TOP}/src/class/dfu/dfu_device.c + ${TOP}/src/class/dfu/dfu_rt_device.c + ${TOP}/src/class/hid/hid_device.c + ${TOP}/src/class/midi/midi_device.c + ${TOP}/src/class/msc/msc_device.c + ${TOP}/src/class/net/net_device.c + ${TOP}/src/class/usbtmc/usbtmc_device.c + ${TOP}/src/class/vendor/vendor_device.c + ) + + + # Base config for host mode; wrapped by SDK's tinyusb_host + add_library(tinyusb_host_base INTERFACE) + target_sources(tinyusb_host_base INTERFACE + ${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c + ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c + ${TOP}/src/host/usbh.c + ${TOP}/src/host/usbh_control.c + ${TOP}/src/host/hub.c + ${TOP}/src/class/cdc/cdc_host.c + ${TOP}/src/class/hid/hid_host.c + ${TOP}/src/class/msc/msc_host.c + ${TOP}/src/class/vendor/vendor_host.c + ) + + # Sometimes have to do host specific actions in mostly + # common functions + target_compile_definitions(tinyusb_host_base INTERFACE + RP2040_USB_HOST_MODE=1 + ) + + add_library(tinyusb_bsp INTERFACE) + target_sources(tinyusb_bsp INTERFACE + ${TOP}/hw/bsp/rp2040/family.c + ) +# target_include_directories(tinyusb_bsp INTERFACE +# ${TOP}/hw/bsp/rp2040) + + # tinyusb_additions will hold our extra settings for examples + add_library(tinyusb_additions INTERFACE) + + target_compile_definitions(tinyusb_additions INTERFACE + PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1 + ) + + if(DEFINED LOG) + target_compile_definitions(tinyusb_additions INTERFACE CFG_TUSB_DEBUG=${LOG} ) + endif() + + if(LOGGER STREQUAL "rtt") + target_compile_definitions(tinyusb_additions INTERFACE + LOGGER_RTT + SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + ) + + target_sources(tinyusb_additions INTERFACE + ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c + ) + + target_include_directories(tinyusb_additions INTERFACE + ${TOP}/lib/SEGGER_RTT/RTT + ) + endif() + + function(family_configure_target TARGET) + pico_add_extra_outputs(${TARGET}) + pico_enable_stdio_uart(${TARGET} 1) + target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board tinyusb_additions) + endfunction() + + function(family_configure_device_example TARGET) + family_configure_target(${TARGET}) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) + endfunction() + + function(family_configure_host_example TARGET) + family_configure_target(${TARGET}) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) + endfunction() + + function(family_initialize_project PROJECT DIR) + # call the original version of this function from family_common.cmake + _family_initialize_project(${PROJECT} ${DIR}) + enable_language(C CXX ASM) + pico_sdk_init() + endfunction() +endif() diff --git a/tinyusb/hw/bsp/rp2040/family.mk b/tinyusb/hw/bsp/rp2040/family.mk new file mode 100755 index 00000000..5db784b1 --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/family.mk @@ -0,0 +1,19 @@ +JLINK_DEVICE = rp2040_m0_0 +PYOCD_TARGET = rp2040 + +ifeq ($(DEBUG), 1) +CMAKE_DEFSYM += -DCMAKE_BUILD_TYPE=Debug +endif + +$(BUILD): + cmake -S . -B $(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) -DPICO_BUILD_DOCS=0 $(CMAKE_DEFSYM) + +all: $(BUILD) + $(MAKE) -C $(BUILD) + +clean: + $(RM) -rf $(BUILD) + +flash: flash-pyocd +flash-uf2: + @$(CP) $(BUILD)/$(PROJECT).uf2 /media/$(USER)/RPI-RP2 diff --git a/tinyusb/hw/bsp/rp2040/pico_sdk_import.cmake b/tinyusb/hw/bsp/rp2040/pico_sdk_import.cmake new file mode 100755 index 00000000..28efe9ea --- /dev/null +++ b/tinyusb/hw/bsp/rp2040/pico_sdk_import.cmake @@ -0,0 +1,62 @@ +# This is a copy of <PICO_SDK_PATH>/external/pico_sdk_import.cmake + +# This can be dropped into an external project to help locate this SDK +# It should be include()ed prior to project() + +if (DEFINED ENV{PICO_SDK_PATH} AND (NOT PICO_SDK_PATH)) + set(PICO_SDK_PATH $ENV{PICO_SDK_PATH}) + message("Using PICO_SDK_PATH from environment ('${PICO_SDK_PATH}')") +endif () + +if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT} AND (NOT PICO_SDK_FETCH_FROM_GIT)) + set(PICO_SDK_FETCH_FROM_GIT $ENV{PICO_SDK_FETCH_FROM_GIT}) + message("Using PICO_SDK_FETCH_FROM_GIT from environment ('${PICO_SDK_FETCH_FROM_GIT}')") +endif () + +if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT_PATH} AND (NOT PICO_SDK_FETCH_FROM_GIT_PATH)) + set(PICO_SDK_FETCH_FROM_GIT_PATH $ENV{PICO_SDK_FETCH_FROM_GIT_PATH}) + message("Using PICO_SDK_FETCH_FROM_GIT_PATH from environment ('${PICO_SDK_FETCH_FROM_GIT_PATH}')") +endif () + +set(PICO_SDK_PATH "${PICO_SDK_PATH}" CACHE PATH "Path to the Raspberry Pi Pico SDK") +set(PICO_SDK_FETCH_FROM_GIT "${PICO_SDK_FETCH_FROM_GIT}" CACHE BOOL "Set to ON to fetch copy of SDK from git if not otherwise locatable") +set(PICO_SDK_FETCH_FROM_GIT_PATH "${PICO_SDK_FETCH_FROM_GIT_PATH}" CACHE FILEPATH "location to download SDK") + +if (NOT PICO_SDK_PATH) + if (PICO_SDK_FETCH_FROM_GIT) + include(FetchContent) + set(FETCHCONTENT_BASE_DIR_SAVE ${FETCHCONTENT_BASE_DIR}) + if (PICO_SDK_FETCH_FROM_GIT_PATH) + get_filename_component(FETCHCONTENT_BASE_DIR "${PICO_SDK_FETCH_FROM_GIT_PATH}" REALPATH BASE_DIR "${CMAKE_SOURCE_DIR}") + endif () + FetchContent_Declare( + pico_sdk + GIT_REPOSITORY https://github.com/raspberrypi/pico-sdk + GIT_TAG master + ) + if (NOT pico_sdk) + message("Downloading Raspberry Pi Pico SDK") + FetchContent_Populate(pico_sdk) + set(PICO_SDK_PATH ${pico_sdk_SOURCE_DIR}) + endif () + set(FETCHCONTENT_BASE_DIR ${FETCHCONTENT_BASE_DIR_SAVE}) + else () + message(FATAL_ERROR + "SDK location was not specified. Please set PICO_SDK_PATH or set PICO_SDK_FETCH_FROM_GIT to on to fetch from git." + ) + endif () +endif () + +get_filename_component(PICO_SDK_PATH "${PICO_SDK_PATH}" REALPATH BASE_DIR "${CMAKE_BINARY_DIR}") +if (NOT EXISTS ${PICO_SDK_PATH}) + message(FATAL_ERROR "Directory '${PICO_SDK_PATH}' not found") +endif () + +set(PICO_SDK_INIT_CMAKE_FILE ${PICO_SDK_PATH}/pico_sdk_init.cmake) +if (NOT EXISTS ${PICO_SDK_INIT_CMAKE_FILE}) + message(FATAL_ERROR "Directory '${PICO_SDK_PATH}' does not appear to contain the Raspberry Pi Pico SDK") +endif () + +set(PICO_SDK_PATH ${PICO_SDK_PATH} CACHE PATH "Path to the Raspberry Pi Pico SDK" FORCE) + +include(${PICO_SDK_INIT_CMAKE_FILE}) diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/board.mk b/tinyusb/hw/bsp/rx/boards/gr_citrus/board.mk new file mode 100755 index 00000000..0eba9461 --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/gr_citrus/board.mk @@ -0,0 +1,24 @@ +DEPS_SUBMODULES += hw/mcu/renesas/rx + +CFLAGS += \ + -mcpu=rx610 \ + -misa=v1 \ + -DCFG_TUSB_MCU=OPT_MCU_RX63X + +MCU_DIR = hw/mcu/renesas/rx/rx63n + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/r5f5631fd.ld + +# For freeRTOS port source +FREERTOS_PORT = RX600 + +# For flash-jlink target +JLINK_DEVICE = R5F5631F +JLINK_IF = JTAG + +# For flash-pyocd target +PYOCD_TARGET = + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/tinyusb/hw/bsp/rx/boards/gr_citrus/gr_citrus.c new file mode 100755 index 00000000..caf5fd6f --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/gr_citrus/gr_citrus.c @@ -0,0 +1,275 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* How to connect JLink and GR-CITRUS + * + * GR-CITRUS needs to solder some pads to enable JTAG interface. + * - Short the following pads individually with solder. + * - J4 + * - J5 + * - Short EMLE pad and 3.3V(GR-CITRUS pin name) with a wire. + * + * The pads are [the back side of GR-CITRUS](https://www.slideshare.net/MinaoYamamoto/grcitrusrx631/2). + * + * Connect the pins between GR-CITRUS and JLink as follows. + * + * | Function | GR-CITRUS pin | JLink pin No.| note | + * |:---------:|:-------------:|:------------:|:--------:| + * | VTref | 3.3V | 1 | | + * | TRST | 5 | 3 | | + * | GND | GND | 4 | | + * | TDI | 3 | 5 | | + * | TMS | 2 | 7 | | + * | TCK/FINEC | 14 | 9 | short J4 | + * | TDO | 9 | 13 | short J5 | + * | nRES | RST | 15 | | + * + * JLink firmware needs to update to V6.96 or newer version to avoid + * [a bug](https://forum.segger.com/index.php/Thread/7758-SOLVED-Bug-in-JLink-from-V6-88b-regarding-RX65N) + * regarding downloading. + */ + +#include "../board.h" +#include "iodefine.h" +#include "interrupt_handlers.h" + +#define IRQ_PRIORITY_CMT0 5 +#define IRQ_PRIORITY_USBI0 6 +#define IRQ_PRIORITY_SCI0 5 + +#define SYSTEM_PRCR_PRC1 (1<<1) +#define SYSTEM_PRCR_PRKEY (0xA5u<<8) + +#define CMT_PCLK 48000000 +#define CMT_CMCR_CKS_DIV_128 2 +#define CMT_CMCR_CMIE (1<<6) +#define MPC_PFS_ISEL (1<<6) + +#define SCI_PCLK 48000000 +#define SCI_SSR_FER (1<<4) +#define SCI_SSR_ORER (1<<5) + +#define SCI_SCR_TEIE (1u<<2) +#define SCI_SCR_RE (1u<<4) +#define SCI_SCR_TE (1u<<5) +#define SCI_SCR_RIE (1u<<6) +#define SCI_SCR_TIE (1u<<7) + +//--------------------------------------------------------------------+ +// SCI0 handling +//--------------------------------------------------------------------+ +typedef struct { + uint8_t *buf; + uint32_t cnt; +} sci_buf_t; +static volatile sci_buf_t sci0_buf[2]; + +void INT_Excep_SCI0_TXI0(void) +{ + uint8_t *buf = sci0_buf[0].buf; + uint32_t cnt = sci0_buf[0].cnt; + + if (!buf || !cnt) { + SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); + return; + } + SCI0.TDR = *buf; + if (--cnt) { + ++buf; + } else { + buf = NULL; + SCI0.SCR.BIT.TIE = 0; + SCI0.SCR.BIT.TEIE = 1; + } + sci0_buf[0].buf = buf; + sci0_buf[0].cnt = cnt; +} + +void INT_Excep_SCI0_TEI0(void) +{ + SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); +} + +void INT_Excep_SCI0_RXI0(void) +{ + uint8_t *buf = sci0_buf[1].buf; + uint32_t cnt = sci0_buf[1].cnt; + + if (!buf || !cnt || + (SCI0.SSR.BYTE & (SCI_SSR_FER | SCI_SSR_ORER))) { + sci0_buf[1].buf = NULL; + SCI0.SSR.BYTE = 0; + SCI0.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); + return; + } + *buf = SCI0.RDR; + if (--cnt) { + ++buf; + } else { + buf = NULL; + SCI0.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); + } + sci0_buf[1].buf = buf; + sci0_buf[1].cnt = cnt; +} + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void INT_Excep_USB0_USBI0(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ +#if CFG_TUSB_OS == OPT_OS_NONE + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; + /* Setup 1ms tick timer */ + CMT0.CMCNT = 0; + CMT0.CMCOR = CMT_PCLK / 1000 / 128; + CMT0.CMCR.WORD = CMT_CMCR_CMIE | CMT_CMCR_CKS_DIV_128; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = IRQ_PRIORITY_CMT0; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +#endif + + /* Unlock MPC registers */ + MPC.PWPR.BIT.B0WI = 0; + MPC.PWPR.BIT.PFSWE = 1; + /* LED PA0 */ + PORTA.PMR.BIT.B0 = 0U; + PORTA.PODR.BIT.B0 = 0U; + PORTA.PDR.BIT.B0 = 1U; + /* UART TXD0 => P20, RXD0 => P21 */ + PORT2.PMR.BIT.B0 = 1U; + PORT2.PCR.BIT.B0 = 1U; + MPC.P20PFS.BYTE = 0b01010; + PORT2.PMR.BIT.B1 = 1U; + MPC.P21PFS.BYTE = 0b01010; + /* USB VBUS -> P16 DPUPE -> P14 */ + PORT1.PMR.BIT.B4 = 1U; + PORT1.PMR.BIT.B6 = 1U; + MPC.P14PFS.BYTE = 0b10001; + MPC.P16PFS.BYTE = MPC_PFS_ISEL | 0b10001; + MPC.PFUSB0.BIT.PUPHZS = 1; + /* Lock MPC registers */ + MPC.PWPR.BIT.PFSWE = 0; + MPC.PWPR.BIT.B0WI = 1; + + IR(USB0, USBI0) = 0; + IPR(USB0, USBI0) = IRQ_PRIORITY_USBI0; + + /* Enable SCI0 */ + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; + MSTP(SCI0) = 0; + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; + SCI0.BRR = (SCI_PCLK / (32 * 115200)) - 1; + IR(SCI0, RXI0) = 0; + IR(SCI0, TXI0) = 0; + IR(SCI0, TEI0) = 0; + IPR(SCI0, RXI0) = IRQ_PRIORITY_SCI0; + IPR(SCI0, TXI0) = IRQ_PRIORITY_SCI0; + IPR(SCI0, TEI0) = IRQ_PRIORITY_SCI0; + IEN(SCI0, RXI0) = 1; + IEN(SCI0, TXI0) = 1; + IEN(SCI0, TEI0) = 1; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + PORTA.PODR.BIT.B0 = state ? 1 : 0; +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + sci0_buf[1].buf = buf; + sci0_buf[1].cnt = len; + SCI0.SCR.BYTE |= SCI_SCR_RE | SCI_SCR_RIE; + while (SCI0.SCR.BIT.RE) ; + return len - sci0_buf[1].cnt; +} + +int board_uart_write(void const *buf, int len) +{ + sci0_buf[0].buf = (uint8_t*)buf; + sci0_buf[0].cnt = len; + SCI0.SCR.BYTE |= SCI_SCR_TE | SCI_SCR_TIE; + while (SCI0.SCR.BIT.TE) ; + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void INT_Excep_CMT0_CMI0(void) +{ + ++system_ticks; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#else +uint32_t SystemCoreClock = 96000000; +#endif + +int close(int fd) +{ + (void)fd; + return -1; +} +int fstat(int fd, void *pstat) +{ + (void)fd; + (void)pstat; + return 0; +} +off_t lseek(int fd, off_t pos, int whence) +{ + (void)fd; + (void)pos; + (void)whence; + return 0; +} +int isatty(int fd) +{ + (void)fd; + return 1; +} diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/hwinit.c b/tinyusb/hw/bsp/rx/boards/gr_citrus/hwinit.c new file mode 100755 index 00000000..8245d774 --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/gr_citrus/hwinit.c @@ -0,0 +1,31 @@ +/************************************************************************/ +/* File Version: V1.00 */ +/* Date Generated: 08/07/2013 */ +/************************************************************************/ + +#include "iodefine.h" +#ifdef __cplusplus +extern "C" { +#endif +extern void HardwareSetup(void); +#ifdef __cplusplus +} +#endif + +void HardwareSetup(void) +{ + SYSTEM.PRCR.WORD = 0xA503u; + SYSTEM.SOSCCR.BYTE = 0x01u; + SYSTEM.MOSCWTCR.BYTE = 0x0Du; + SYSTEM.PLLWTCR.BYTE = 0x0Eu; + SYSTEM.PLLCR.WORD = 0x0F00u; + SYSTEM.MOSCCR.BYTE = 0x00u; + SYSTEM.PLLCR2.BYTE = 0x00u; + for (unsigned i = 0; i < 2075u; ++i) __asm("nop"); + SYSTEM.SCKCR.LONG = 0x21021211u; + SYSTEM.SCKCR2.WORD = 0x0033u; + SYSTEM.SCKCR3.WORD = 0x0400u; + SYSTEM.SYSCR0.WORD = 0x5A01; + SYSTEM.MSTPCRB.BIT.MSTPB15 = 0; + SYSTEM.PRCR.WORD = 0xA500u; +} diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/r5f5631fd.ld b/tinyusb/hw/bsp/rx/boards/gr_citrus/r5f5631fd.ld new file mode 100755 index 00000000..bb9c297c --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/gr_citrus/r5f5631fd.ld @@ -0,0 +1,127 @@ +__USTACK_SIZE = 0x00000400; +__ISTACK_SIZE = 0x00000400; + +MEMORY +{ + RAM : ORIGIN = 0x4, LENGTH = 0x3fffc + ROM : ORIGIN = 0xFFE00000, LENGTH = 0x200000 +} +SECTIONS +{ + .fvectors 0xFFFFFF80: AT(0xFFFFFF80) + { + KEEP(*(.fvectors)) + } > ROM + .text 0xFFE00000: AT(0xFFE00000) + { + *(.text) + *(.text.*) + *(P) + etext = .; + } > ROM + .rvectors ALIGN(4): + { + _rvectors_start = .; + KEEP(*(.rvectors)) + _rvectors_end = .; + } > ROM + .init : + { + KEEP(*(.init)) + __preinit_array_start = .; + KEEP(*(.preinit_array)) + __preinit_array_end = .; + __init_array_start = (. + 3) & ~ 3; + KEEP(*(.init_array)) + KEEP(*(SORT(.init_array.*))) + __init_array_end = .; + __fini_array_start = .; + KEEP(*(.fini_array)) + KEEP(*(SORT(.fini_array.*))) + __fini_array_end = .; + } > ROM + .fini : + { + KEEP(*(.fini)) + } > ROM + .got : + { + *(.got) + *(.got.plt) + } > ROM + .rodata : + { + *(.rodata) + *(.rodata.*) + *(C_1) + *(C_2) + *(C) + _erodata = .; + } > ROM + .eh_frame_hdr : + { + *(.eh_frame_hdr) + } > ROM + .eh_frame : + { + *(.eh_frame) + } > ROM + .jcr : + { + *(.jcr) + } > ROM + .tors : + { + __CTOR_LIST__ = .; + . = ALIGN(2); + ___ctors = .; + *(.ctors) + ___ctors_end = .; + __CTOR_END__ = .; + __DTOR_LIST__ = .; + ___dtors = .; + *(.dtors) + ___dtors_end = .; + __DTOR_END__ = .; + . = ALIGN(2); + _mdata = .; + } > ROM + .data : AT(_mdata) + { + _data = .; + *(.data) + *(.data.*) + *(D) + *(D_1) + *(D_2) + _edata = .; + } > RAM + .gcc_exc : + { + *(.gcc_exc) + } > RAM + .bss : + { + _bss = .; + *(.bss) + *(.bss.**) + *(COMMON) + *(B) + *(B_1) + *(B_2) + _ebss = .; + _end = .; + } > RAM + .ustack : + { + . = ALIGN(8); + . = . + __USTACK_SIZE; + PROVIDE(_ustack = .); + } > RAM + .istack : + { + . = ALIGN(8); + . = . + __ISTACK_SIZE; + PROVIDE(_istack = .); + } > RAM +} diff --git a/tinyusb/hw/bsp/rx/boards/rx65n_target/board.mk b/tinyusb/hw/bsp/rx/boards/rx65n_target/board.mk new file mode 100755 index 00000000..fc76d79f --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/rx65n_target/board.mk @@ -0,0 +1,25 @@ +CFLAGS += \ + -mcpu=rx64m \ + -misa=v2 \ + -DCFG_TUSB_MCU=OPT_MCU_RX65X \ + -DIR_USB0_USBI0=IR_PERIB_INTB185 \ + -DIER_USB0_USBI0=IER_PERIB_INTB185 \ + -DIEN_USB0_USBI0=IEN_PERIB_INTB185 + +MCU_DIR = hw/mcu/renesas/rx/rx65n + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/r5f565ne.ld + +# For freeRTOS port source +FREERTOS_PORT = RX600 + +# For flash-jlink target +JLINK_DEVICE = R5F565NE +JLINK_IF = JTAG + +# For flash-pyocd target +PYOCD_TARGET = + +# flash using rfp-cli +flash: flash-rfp diff --git a/tinyusb/hw/bsp/rx/boards/rx65n_target/r5f565ne.ld b/tinyusb/hw/bsp/rx/boards/rx65n_target/r5f565ne.ld new file mode 100755 index 00000000..8e5617f2 --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/rx65n_target/r5f565ne.ld @@ -0,0 +1,168 @@ +__USTACK_SIZE = 0x00000400; +__ISTACK_SIZE = 0x00000400; + +MEMORY +{ + RAM : ORIGIN = 0x4, LENGTH = 0x3fffc + RAM2 : ORIGIN = 0x00800000, LENGTH = 0x60000 + OFS : ORIGIN = 0xFE7F5D00, LENGTH = 128 + ROM : ORIGIN = 0xFFE00000, LENGTH = 0x200000 +} +SECTIONS +{ + .exvectors 0xFFFFFF80: AT(0xFFFFFF80) + { + "_exvectors_start" = .; + KEEP(*(.exvectors)) + "_exvectors_end" = .; + } >ROM + .fvectors 0xFFFFFFFC: AT(0xFFFFFFFC) + { + KEEP(*(.fvectors)) + } > ROM + .text 0xFFE00000: AT(0xFFE00000) + { + *(.text) + *(.text.*) + *(P) + KEEP(*(.text.*_isr)) + etext = .; + } > ROM + .rvectors ALIGN(4): + { + _rvectors_start = .; + KEEP(*(.rvectors)) + _rvectors_end = .; + } > ROM + .init : + { + KEEP(*(.init)) + __preinit_array_start = .; + KEEP(*(.preinit_array)) + __preinit_array_end = .; + __init_array_start = (. + 3) & ~ 3; + KEEP(*(.init_array)) + KEEP(*(SORT(.init_array.*))) + __init_array_end = .; + __fini_array_start = .; + KEEP(*(.fini_array)) + KEEP(*(SORT(.fini_array.*))) + __fini_array_end = .; + } > ROM + .fini : + { + KEEP(*(.fini)) + } > ROM + .got : + { + *(.got) + *(.got.plt) + } > ROM + .rodata : + { + *(.rodata) + *(.rodata.*) + *(C_1) + *(C_2) + *(C) + _erodata = .; + } > ROM + .eh_frame_hdr : + { + *(.eh_frame_hdr) + } > ROM + .eh_frame : + { + *(.eh_frame) + } > ROM + .jcr : + { + *(.jcr) + } > ROM + .tors : + { + __CTOR_LIST__ = .; + . = ALIGN(2); + ___ctors = .; + *(.ctors) + ___ctors_end = .; + __CTOR_END__ = .; + __DTOR_LIST__ = .; + ___dtors = .; + *(.dtors) + ___dtors_end = .; + __DTOR_END__ = .; + . = ALIGN(2); + _mdata = .; + } > ROM + .data : AT(_mdata) + { + _data = .; + *(.data) + *(.data.*) + *(D) + *(D_1) + *(D_2) + _edata = .; + } > RAM + .gcc_exc : + { + *(.gcc_exc) + } > RAM + .bss : + { + _bss = .; + *(.bss) + *(.bss.**) + *(COMMON) + *(B) + *(B_1) + *(B_2) + _ebss = .; + _end = .; + } > RAM + .ustack : + { + . = ALIGN(8); + . = . + __USTACK_SIZE; + PROVIDE(_ustack = .); + } > RAM + .istack : + { + . = ALIGN(8); + . = . + __ISTACK_SIZE; + PROVIDE(_istack = .); + } > RAM + .ofs1 0xFE7F5D00: AT(0xFE7F5D00) + { + KEEP(*(.ofs1)) + } > OFS + .ofs2 0xFE7F5D10: AT(0xFE7F5D10) + { + KEEP(*(.ofs2)) + } > OFS + .ofs3 0xFE7F5D20: AT(0xFE7F5D20) + { + KEEP(*(.ofs3)) + } > OFS + .ofs4 0xFE7F5D40: AT(0xFE7F5D40) + { + KEEP(*(.ofs4)) + } > OFS + .ofs5 0xFE7F5D48: AT(0xFE7F5D48) + { + KEEP(*(.ofs5)) + } > OFS + .ofs6 0xFE7F5D50: AT(0xFE7F5D50) + { + KEEP(*(.ofs6)) + } > OFS + .ofs7 0xFE7F5D64: AT(0xFE7F5D64) + { + KEEP(*(.ofs7)) + } > OFS + .ofs8 0xFE7F5D70: AT(0xFE7F5D70) + { + KEEP(*(.ofs8)) + } > OFS +} diff --git a/tinyusb/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/tinyusb/hw/bsp/rx/boards/rx65n_target/rx65n_target.c new file mode 100755 index 00000000..20867455 --- /dev/null +++ b/tinyusb/hw/bsp/rx/boards/rx65n_target/rx65n_target.c @@ -0,0 +1,320 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* How to connect JLink and RX65n Target and option board + * (For original comment https://github.com/hathach/tinyusb/pull/922#issuecomment-869786131) + * + * To enable JTAG, RX65N requires following connections on main board. + * - short EJ2 jumper header, to disable onboard E2L. + * - short EMLE(J1-2) and 3V3(J1-14 or J2-10), to enable In-Circuit Emulator. + * + * Note: For RX65N-Cloud-Kit, the option board's JTAG pins to some switches or floating. + * To use JLink with the option board, I think some further modifications will be necessary. + * + * | Function | RX65N pin | main board | option board | JLink connector | + * |:---------:|:----------:|:----------:|:------------:|:---------------:| + * | 3V3 | VCC | J1-14 | CN5-6 | 1 | + * | TRST | P34 | J1-16 | CN5-7 | 3 | + * | GND | VSS | J1-12 | CN5-5 | 4 | + * | TDI | P30 | J1-20 | CN5-10 | 5 | + * | TMS | P31 | J1-19 | USER_SW | 7 | + * | TCK/FINEC | P27 | J1-21 | N/A | 9 | + * | TDO | P26 | J1-22 | CN5-9 | 13 | + * | nRES | RES# | J1-10 | RESET_SW | 15 | + * + * JLink firmware needs to update to V6.96 or newer version to avoid + * [a bug](https://forum.segger.com/index.php/Thread/7758-SOLVED-Bug-in-JLink-from-V6-88b-regarding-RX65N) + * regarding downloading. + */ + +#include "bsp/board.h" +#include "iodefine.h" +#include "interrupt_handlers.h" + +#define IRQ_PRIORITY_CMT0 5 +#define IRQ_PRIORITY_USBI0 6 +#define IRQ_PRIORITY_SCI5 5 + +#define SYSTEM_PRCR_PRC1 (1<<1) +#define SYSTEM_PRCR_PRKEY (0xA5u<<8) + +#define CMT_PCLK 60000000 +#define CMT_CMCR_CKS_DIV_128 2 +#define CMT_CMCR_CMIE (1<<6) +#define MPC_PFS_ISEL (1<<6) + +#define SCI_PCLK 60000000 +#define SCI_SSR_FER (1<<4) +#define SCI_SSR_ORER (1<<5) + +#define SCI_SCR_TEIE (1u<<2) +#define SCI_SCR_RE (1u<<4) +#define SCI_SCR_TE (1u<<5) +#define SCI_SCR_RIE (1u<<6) +#define SCI_SCR_TIE (1u<<7) +#define INT_Excep_SCI5_TEI5 INT_Excep_ICU_GROUPBL0 + +#define IRQ_USB0_USBI0 62 +#define SLIBR_USBI0 SLIBR185 +#define IPR_USB0_USBI0 IPR_PERIB_INTB185 +#define INT_Excep_USB0_USBI0 INT_Excep_PERIB_INTB185 + +void HardwareSetup(void) +{ + FLASH.ROMCIV.WORD = 1; + while (FLASH.ROMCIV.WORD) ; + FLASH.ROMCE.WORD = 1; + while (!FLASH.ROMCE.WORD) ; + + SYSTEM.PRCR.WORD = 0xA503u; + if (!SYSTEM.RSTSR1.BYTE) { + RTC.RCR4.BYTE = 0; + RTC.RCR3.BYTE = 12; + while (12 != RTC.RCR3.BYTE) ; + } + SYSTEM.SOSCCR.BYTE = 1; + + if (SYSTEM.HOCOCR.BYTE) { + SYSTEM.HOCOCR.BYTE = 0; + while (!SYSTEM.OSCOVFSR.BIT.HCOVF) ; + } + SYSTEM.PLLCR.WORD = 0x1D10u; /* HOCO x 15 */ + SYSTEM.PLLCR2.BYTE = 0; + while (!SYSTEM.OSCOVFSR.BIT.PLOVF) ; + + SYSTEM.SCKCR.LONG = 0x21C11222u; + SYSTEM.SCKCR2.WORD = 0x0041u; + SYSTEM.ROMWT.BYTE = 0x02u; + while (0x02u != SYSTEM.ROMWT.BYTE) ; + SYSTEM.SCKCR3.WORD = 0x400u; + SYSTEM.PRCR.WORD = 0xA500u; +} + +//--------------------------------------------------------------------+ +// SCI handling +//--------------------------------------------------------------------+ +typedef struct { + uint8_t *buf; + uint32_t cnt; +} sci_buf_t; +static volatile sci_buf_t sci_buf[2]; + +void INT_Excep_SCI5_TXI5(void) +{ + uint8_t *buf = sci_buf[0].buf; + uint32_t cnt = sci_buf[0].cnt; + + if (!buf || !cnt) { + SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); + return; + } + SCI5.TDR = *buf; + if (--cnt) { + ++buf; + } else { + buf = NULL; + SCI5.SCR.BIT.TIE = 0; + SCI5.SCR.BIT.TEIE = 1; + } + sci_buf[0].buf = buf; + sci_buf[0].cnt = cnt; +} + +void INT_Excep_SCI5_TEI5(void) +{ + SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); +} + +void INT_Excep_SCI5_RXI5(void) +{ + uint8_t *buf = sci_buf[1].buf; + uint32_t cnt = sci_buf[1].cnt; + + if (!buf || !cnt || + (SCI5.SSR.BYTE & (SCI_SSR_FER | SCI_SSR_ORER))) { + sci_buf[1].buf = NULL; + SCI5.SSR.BYTE = 0; + SCI5.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); + return; + } + *buf = SCI5.RDR; + if (--cnt) { + ++buf; + } else { + buf = NULL; + SCI5.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); + } + sci_buf[1].buf = buf; + sci_buf[1].cnt = cnt; +} + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void INT_Excep_USB0_USBI0(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* setup software configurable interrupts */ + ICU.SLIBR_USBI0.BYTE = IRQ_USB0_USBI0; + ICU.SLIPRCR.BYTE = 1; + +#if CFG_TUSB_OS == OPT_OS_NONE + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; + /* Setup 1ms tick timer */ + CMT0.CMCNT = 0; + CMT0.CMCOR = CMT_PCLK / 1000 / 128; + CMT0.CMCR.WORD = CMT_CMCR_CMIE | CMT_CMCR_CKS_DIV_128; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = IRQ_PRIORITY_CMT0; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +#endif + + /* Unlock MPC registers */ + MPC.PWPR.BIT.B0WI = 0; + MPC.PWPR.BIT.PFSWE = 1; + // SW PB1 + PORTB.PMR.BIT.B1 = 0U; + PORTB.PDR.BIT.B1 = 0U; + // LED PD6 + PORTD.PODR.BIT.B6 = 1U; + PORTD.ODR1.BIT.B4 = 1U; + PORTD.PMR.BIT.B6 = 0U; + PORTD.PDR.BIT.B6 = 1U; + /* UART TXD5 => PA4, RXD5 => PA3 */ + PORTA.PMR.BIT.B4 = 1U; + PORTA.PCR.BIT.B4 = 1U; + MPC.PA4PFS.BYTE = 0b01010; + PORTA.PMR.BIT.B3 = 1U; + MPC.PA5PFS.BYTE = 0b01010; + /* USB VBUS -> P16 */ + PORT1.PMR.BIT.B6 = 1U; + MPC.P16PFS.BYTE = MPC_PFS_ISEL | 0b10001; + /* Lock MPC registers */ + MPC.PWPR.BIT.PFSWE = 0; + MPC.PWPR.BIT.B0WI = 1; + + /* Enable SCI5 */ + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; + MSTP(SCI5) = 0; + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; + SCI5.SEMR.BIT.ABCS = 1; + SCI5.SEMR.BIT.BGDM = 1; + SCI5.BRR = (SCI_PCLK / (8 * 115200)) - 1; + IR(SCI5, RXI5) = 0; + IR(SCI5, TXI5) = 0; + IS(SCI5, TEI5) = 0; + IR(ICU, GROUPBL0) = 0; + IPR(SCI5, RXI5) = IRQ_PRIORITY_SCI5; + IPR(SCI5, TXI5) = IRQ_PRIORITY_SCI5; + IPR(ICU,GROUPBL0) = IRQ_PRIORITY_SCI5; + IEN(SCI5, RXI5) = 1; + IEN(SCI5, TXI5) = 1; + IEN(ICU,GROUPBL0) = 1; + EN(SCI5, TEI5) = 1; + + /* setup USBI0 interrupt. */ + IR(USB0, USBI0) = 0; + IPR(USB0, USBI0) = IRQ_PRIORITY_USBI0; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + PORTD.PODR.BIT.B6 = state ? 0 : 1; +} + +uint32_t board_button_read(void) +{ + return PORTB.PIDR.BIT.B1 ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + sci_buf[1].buf = buf; + sci_buf[1].cnt = len; + SCI5.SCR.BYTE |= SCI_SCR_RE | SCI_SCR_RIE; + while (SCI5.SCR.BIT.RE) ; + return len - sci_buf[1].cnt; +} + +int board_uart_write(void const *buf, int len) +{ + sci_buf[0].buf = (uint8_t*)buf; + sci_buf[0].cnt = len; + SCI5.SCR.BYTE |= SCI_SCR_TE | SCI_SCR_TIE; + while (SCI5.SCR.BIT.TE) ; + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void INT_Excep_CMT0_CMI0(void) +{ + ++system_ticks; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#else +uint32_t SystemCoreClock = 120000000; +#endif + +int close(int fd) +{ + (void)fd; + return -1; +} +int fstat(int fd, void *pstat) +{ + (void)fd; + (void)pstat; + return 0; +} +off_t lseek(int fd, off_t pos, int whence) +{ + (void)fd; + (void)pos; + (void)whence; + return 0; +} +int isatty(int fd) +{ + (void)fd; + return 1; +} diff --git a/tinyusb/hw/bsp/rx/family.mk b/tinyusb/hw/bsp/rx/family.mk new file mode 100755 index 00000000..5a828171 --- /dev/null +++ b/tinyusb/hw/bsp/rx/family.mk @@ -0,0 +1,32 @@ +DEPS_SUBMODULES += hw/mcu/renesas/rx + +# Cross Compiler for RX +CROSS_COMPILE = rx-elf- + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -nostartfiles \ + -ffunction-sections \ + -fdata-sections \ + -fshort-enums \ + -mlittle-endian-data \ + -DSSIZE_MAX=__INT_MAX__ + +SRC_C += \ + src/portable/renesas/usba/dcd_usba.c \ + $(MCU_DIR)/vects.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR) + +SRC_S += $(MCU_DIR)/start.S + +$(BUILD)/$(PROJECT).mot: $(BUILD)/$(PROJECT).elf + @echo CREATE $@ + $(OBJCOPY) -O srec -I elf32-rx-be-ns $^ $@ + +# flash using rfp-cli +flash-rfp: $(BUILD)/$(PROJECT).mot + rfp-cli -device rx65x -tool e2l -if fine -fo id FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -auth id FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -auto $^ diff --git a/tinyusb/hw/bsp/samd11/boards/luna_d11/board.h b/tinyusb/hw/bsp/samd11/boards/luna_d11/board.h new file mode 100755 index 00000000..1bda9293 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/boards/luna_d11/board.h @@ -0,0 +1,46 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA27 // pin PA22 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN PIN_PA16 // pin PB22 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd11/boards/luna_d11/board.mk b/tinyusb/hw/bsp/samd11/boards/luna_d11/board.mk new file mode 100755 index 00000000..ad9cfb25 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/boards/luna_d11/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -D__SAMD11D14AM__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/samd11d14am_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD11D14 + +# flash using dfu-util +flash: $(BUILD)/$(PROJECT).bin + dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/tinyusb/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld b/tinyusb/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld new file mode 100755 index 00000000..cb633c19 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD11D14AM + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 4K, LENGTH = 0x00004000 - 4K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x400; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.h b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.h new file mode 100755 index 00000000..cfeac673 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.h @@ -0,0 +1,46 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA16 // pin PA22 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN PIN_PA14 // pin PB22 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.mk b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.mk new file mode 100755 index 00000000..e351cf0b --- /dev/null +++ b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -D__SAMD11D14AM__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/samd11d14am_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD11D14 + +# flash using edbg +flash: $(BUILD)/$(PROJECT).bin + edbg -b -t samd11 -e -pv -f $< diff --git a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld new file mode 100755 index 00000000..8b3124c0 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD11D14AM + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00004000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x400; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd11/family.c b/tinyusb/hw/bsp/samd11/family.c new file mode 100755 index 00000000..8d963397 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/family.c @@ -0,0 +1,150 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "sam.h" +#include "bsp/board.h" +#include "board.h" + +#include "hal/include/hal_gpio.h" +#include "hal/include/hal_init.h" +#include "hri/hri_nvmctrl_d11.h" + +#include "hpl/gclk/hpl_gclk_base.h" +#include "hpl_pm_config.h" +#include "hpl/pm/hpl_pm_base.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_Handler(void) +{ + tud_int_handler(0); +} + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +/* Referenced GCLKs, should be initialized firstly */ +#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) + +/* Not referenced GCLKs, initialized last */ +#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) + +void board_init(void) +{ + // Clock init ( follow hpl_init.c ) + hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); + + _pm_init(); + _sysctrl_init_sources(); +#if _GCLK_INIT_1ST + _gclk_init_generators_by_fref(_GCLK_INIT_1ST); +#endif + _sysctrl_init_referenced_generators(); + _gclk_init_generators_by_fref(_GCLK_INIT_LAST); + + // 1ms tick timer (samd SystemCoreClock may not correct) + SystemCoreClock = CONF_CPU_FREQUENCY; + SysTick_Config(CONF_CPU_FREQUENCY / 1000); + + // Led init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(LED_PIN, 0); + + // Button init + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + + /* USB Clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ + _pm_enable_bus_clock(PM_BUS_APBB, USB); + _pm_enable_bus_clock(PM_BUS_AHB, USB); + _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); + + // USB Pin Init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE + +volatile uint32_t system_ticks = 0; + +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} + +void _init(void) +{ + // This _init() standin makes certain GCC environments happier. + // They expect the main binary to have a constructor called _init; but don't provide a weak default. + // Providing an empty constructor satisfies this odd case, and doesn't harm anything. +} + + +#endif diff --git a/tinyusb/hw/bsp/samd11/family.mk b/tinyusb/hw/bsp/samd11/family.mk new file mode 100755 index 00000000..032d11b9 --- /dev/null +++ b/tinyusb/hw/bsp/samd11/family.mk @@ -0,0 +1,37 @@ +DEPS_SUBMODULES += hw/mcu/microchip + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -nostdlib -nostartfiles \ + -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ + -DOSC32K_OVERWRITE_CALIBRATION=0 \ + -DCFG_TUSB_MCU=OPT_MCU_SAMD11 + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + hw/mcu/microchip/samd11/gcc/gcc/startup_samd11.c \ + hw/mcu/microchip/samd11/gcc/system_samd11.c \ + hw/mcu/microchip/samd11/hpl/gclk/hpl_gclk.c \ + hw/mcu/microchip/samd11/hpl/pm/hpl_pm.c \ + hw/mcu/microchip/samd11/hpl/sysctrl/hpl_sysctrl.c \ + hw/mcu/microchip/samd11/hal/src/hal_atomic.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/hw/mcu/microchip/samd11/ \ + $(TOP)/hw/mcu/microchip/samd11/config \ + $(TOP)/hw/mcu/microchip/samd11/include \ + $(TOP)/hw/mcu/microchip/samd11/hal/include \ + $(TOP)/hw/mcu/microchip/samd11/hal/utils/include \ + $(TOP)/hw/mcu/microchip/samd11/hpl/pm/ \ + $(TOP)/hw/mcu/microchip/samd11/hpl/port \ + $(TOP)/hw/mcu/microchip/samd11/hri \ + $(TOP)/hw/mcu/microchip/samd11/CMSIS/Include \ + $(TOP)/hw/mcu/microchip/samd11/CMSIS/Core/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 diff --git a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.h new file mode 100755 index 00000000..a3e03997 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN (32 + 30) // PB30 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN (0 + 15) // PA15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.mk b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.mk new file mode 100755 index 00000000..5cd82735 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.mk @@ -0,0 +1,10 @@ +CFLAGS += -D__SAMD21J18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/samd21j18a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21J18 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld new file mode 100755 index 00000000..e2f93416 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21J18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.h b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.h new file mode 100755 index 00000000..2d7da1c0 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 28 +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.mk b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.mk new file mode 100755 index 00000000..bb426cda --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD21G18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld new file mode 100755 index 00000000..f0c93340 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.h b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.h new file mode 100755 index 00000000..b9292b9a --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.mk b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.mk new file mode 100755 index 00000000..bb426cda --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD21G18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld new file mode 100755 index 00000000..f0c93340 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.h new file mode 100755 index 00000000..177fb695 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 21 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.mk b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.mk new file mode 100755 index 00000000..bb426cda --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD21G18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld new file mode 100755 index 00000000..f0c93340 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/boards/luna_d21/board.h b/tinyusb/hw/bsp/samd21/boards/luna_d21/board.h new file mode 100755 index 00000000..2e0a2a60 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/luna_d21/board.h @@ -0,0 +1,46 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA22 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PB22 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/luna_d21/board.mk b/tinyusb/hw/bsp/samd21/boards/luna_d21/board.mk new file mode 100755 index 00000000..5beb5e02 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/luna_d21/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -D__SAMD21G18A__ + +LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +# flash using dfu-util +flash: $(BUILD)/$(PROJECT).bin + dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< + diff --git a/tinyusb/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld b/tinyusb/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld new file mode 100755 index 00000000..15859303 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 4K, LENGTH = 0x00040000 - 4K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.h b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.h new file mode 100755 index 00000000..b9292b9a --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.mk b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.mk new file mode 100755 index 00000000..bb426cda --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD21G18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld new file mode 100755 index 00000000..f0c93340 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.h new file mode 100755 index 00000000..0d1e9cef --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 9 // PA4 pin D1 on seed input +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.mk b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.mk new file mode 100755 index 00000000..54591b3a --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD21G18A__ + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld new file mode 100755 index 00000000..cf11c4c3 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K /* 8K offset to preserve bootloader */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd21/family.c b/tinyusb/hw/bsp/samd21/family.c new file mode 100755 index 00000000..eb5b5586 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/family.c @@ -0,0 +1,153 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "sam.h" +#include "bsp/board.h" +#include "board.h" + +#include "hal/include/hal_gpio.h" +#include "hal/include/hal_init.h" +#include "hri/hri_nvmctrl_d21.h" + +#include "hpl/gclk/hpl_gclk_base.h" +#include "hpl_pm_config.h" +#include "hpl/pm/hpl_pm_base.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_Handler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +/* Referenced GCLKs, should be initialized firstly */ +#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) + +/* Not referenced GCLKs, initialized last */ +#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) + +void board_init(void) +{ + // Clock init ( follow hpl_init.c ) + hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); + + _pm_init(); + _sysctrl_init_sources(); +#if _GCLK_INIT_1ST + _gclk_init_generators_by_fref(_GCLK_INIT_1ST); +#endif + _sysctrl_init_referenced_generators(); + _gclk_init_generators_by_fref(_GCLK_INIT_LAST); + + // Update SystemCoreClock since it is hard coded with asf4 and not correct + // Init 1ms tick timer (samd SystemCoreClock may not correct) + SystemCoreClock = CONF_CPU_FREQUENCY; + SysTick_Config(CONF_CPU_FREQUENCY / 1000); + + // Led init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + board_led_write(false); + + // Button init + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + /* USB Clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ + _pm_enable_bus_clock(PM_BUS_APBB, USB); + _pm_enable_bus_clock(PM_BUS_AHB, USB); + _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); + + // USB Pin Init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); + + // Output 500hz PWM on D12 (PA19 - TCC0 WO[3]) so we can validate the GCLK0 clock speed with a Saleae. + _pm_enable_bus_clock(PM_BUS_APBC, TCC0); + TCC0->PER.bit.PER = 48000000 / 1000; + TCC0->CC[3].bit.CC = 48000000 / 2000; + TCC0->CTRLA.bit.ENABLE = true; + + gpio_set_pin_function(PIN_PA19, PINMUX_PA19F_TCC0_WO3); + _gclk_enable_channel(TCC0_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/samd21/family.mk b/tinyusb/hw/bsp/samd21/family.mk new file mode 100755 index 00000000..f1b063f2 --- /dev/null +++ b/tinyusb/hw/bsp/samd21/family.mk @@ -0,0 +1,46 @@ +UF2_FAMILY_ID = 0x68ed2b88 +DEPS_SUBMODULES += hw/mcu/microchip + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -nostdlib -nostartfiles \ + -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ + -DCFG_TUSB_MCU=OPT_MCU_SAMD21 + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + hw/mcu/microchip/samd21/gcc/gcc/startup_samd21.c \ + hw/mcu/microchip/samd21/gcc/system_samd21.c \ + hw/mcu/microchip/samd21/hpl/gclk/hpl_gclk.c \ + hw/mcu/microchip/samd21/hpl/pm/hpl_pm.c \ + hw/mcu/microchip/samd21/hpl/sysctrl/hpl_sysctrl.c \ + hw/mcu/microchip/samd21/hal/src/hal_atomic.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/hw/mcu/microchip/samd21/ \ + $(TOP)/hw/mcu/microchip/samd21/config \ + $(TOP)/hw/mcu/microchip/samd21/include \ + $(TOP)/hw/mcu/microchip/samd21/hal/include \ + $(TOP)/hw/mcu/microchip/samd21/hal/utils/include \ + $(TOP)/hw/mcu/microchip/samd21/hpl/pm/ \ + $(TOP)/hw/mcu/microchip/samd21/hpl/port \ + $(TOP)/hw/mcu/microchip/samd21/hri \ + $(TOP)/hw/mcu/microchip/samd21/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash-bossac: $(BUILD)/$(PROJECT).bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h new file mode 100755 index 00000000..1d5ed804 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 23 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 16 // D5 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_TX_PIN (32 + 17) +#define UART_RX_PIN (32 + 16) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk new file mode 100755 index 00000000..a8a98a98 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk @@ -0,0 +1,8 @@ +CFLAGS += -D__SAMD51J19A__ + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD51J19 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld new file mode 100755 index 00000000..f1a021d7 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD51G19A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h new file mode 100755 index 00000000..0760d428 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 22 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 18 // D5 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_TX_PIN 16 +#define UART_RX_PIN 17 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk new file mode 100755 index 00000000..57a680e9 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD51J19A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD51J19 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld new file mode 100755 index 00000000..f1a021d7 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD51G19A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h new file mode 100755 index 00000000..9bb5f815 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 16 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN (32+14) // D5 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_TX_PIN 23 +#define UART_RX_PIN 22 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk new file mode 100755 index 00000000..d7953cc2 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk @@ -0,0 +1,10 @@ +CFLAGS += -D__SAMD51J19A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD51J19 + +flash: flash-bossac + diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld new file mode 100755 index 00000000..f1a021d7 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD51G19A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/board.h b/tinyusb/hw/bsp/samd51/boards/pybadge/board.h new file mode 100755 index 00000000..1d5ed804 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/pybadge/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 23 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 16 // D5 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_TX_PIN (32 + 17) +#define UART_RX_PIN (32 + 16) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk b/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk new file mode 100755 index 00000000..a8a98a98 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk @@ -0,0 +1,8 @@ +CFLAGS += -D__SAMD51J19A__ + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD51J19 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld b/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld new file mode 100755 index 00000000..f1a021d7 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD51G19A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/board.h b/tinyusb/hw/bsp/samd51/boards/pyportal/board.h new file mode 100755 index 00000000..9e51ded3 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/pyportal/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN (32+23) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN (32+22) // D2 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_TX_PIN (32 + 13) +#define UART_RX_PIN (32 + 12) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk b/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk new file mode 100755 index 00000000..a8a98a98 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk @@ -0,0 +1,8 @@ +CFLAGS += -D__SAMD51J19A__ + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD51J19 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld b/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld new file mode 100755 index 00000000..f1a021d7 --- /dev/null +++ b/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD51G19A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/samd51/family.c b/tinyusb/hw/bsp/samd51/family.c new file mode 100755 index 00000000..020e638c --- /dev/null +++ b/tinyusb/hw/bsp/samd51/family.c @@ -0,0 +1,162 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "sam.h" +#include "bsp/board.h" +#include "board.h" + +#include "hal/include/hal_gpio.h" +#include "hal/include/hal_init.h" +#include "hpl/gclk/hpl_gclk_base.h" +#include "hpl_mclk_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_0_Handler (void) +{ + tud_int_handler(0); +} + +void USB_1_Handler (void) +{ + tud_int_handler(0); +} + +void USB_2_Handler (void) +{ + tud_int_handler(0); +} + +void USB_3_Handler (void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +/* Referenced GCLKs, should be initialized firstly */ +#define _GCLK_INIT_1ST 0xFFFFFFFF + +/* Not referenced GCLKs, initialized last */ +#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) + +void board_init(void) +{ + // Clock init ( follow hpl_init.c ) + hri_nvmctrl_set_CTRLA_RWS_bf(NVMCTRL, 0); + + _osc32kctrl_init_sources(); + _oscctrl_init_sources(); + _mclk_init(); +#if _GCLK_INIT_1ST + _gclk_init_generators_by_fref(_GCLK_INIT_1ST); +#endif + _oscctrl_init_referenced_generators(); + _gclk_init_generators_by_fref(_GCLK_INIT_LAST); + + // Update SystemCoreClock since it is hard coded with asf4 and not correct + // Init 1ms tick timer (samd SystemCoreClock may not correct) + SystemCoreClock = CONF_CPU_FREQUENCY; + SysTick_Config(CONF_CPU_FREQUENCY / 1000); + + // Led init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(LED_PIN, 0); + + // Button init + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + /* USB Clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB Pin Init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // button is active low + return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/tinyusb/hw/bsp/samd51/family.mk b/tinyusb/hw/bsp/samd51/family.mk new file mode 100755 index 00000000..f4e260fb --- /dev/null +++ b/tinyusb/hw/bsp/samd51/family.mk @@ -0,0 +1,49 @@ +UF2_FAMILY_ID = 0x55114460 +DEPS_SUBMODULES += hw/mcu/microchip + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_SAMD51 + +CFLAGS += -Wno-error=undef + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + hw/mcu/microchip/samd51/gcc/gcc/startup_samd51.c \ + hw/mcu/microchip/samd51/gcc/system_samd51.c \ + hw/mcu/microchip/samd51/hpl/gclk/hpl_gclk.c \ + hw/mcu/microchip/samd51/hpl/mclk/hpl_mclk.c \ + hw/mcu/microchip/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c \ + hw/mcu/microchip/samd51/hpl/oscctrl/hpl_oscctrl.c \ + hw/mcu/microchip/samd51/hal/src/hal_atomic.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/hw/mcu/microchip/samd51/ \ + $(TOP)/hw/mcu/microchip/samd51/config \ + $(TOP)/hw/mcu/microchip/samd51/include \ + $(TOP)/hw/mcu/microchip/samd51/hal/include \ + $(TOP)/hw/mcu/microchip/samd51/hal/utils/include \ + $(TOP)/hw/mcu/microchip/samd51/hpl/port \ + $(TOP)/hw/mcu/microchip/samd51/hri \ + $(TOP)/hw/mcu/microchip/samd51/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash-bossac: $(BUILD)/$(PROJECT).bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R diff --git a/tinyusb/hw/bsp/same54xplainedpro/board.mk b/tinyusb/hw/bsp/same54xplainedpro/board.mk new file mode 100755 index 00000000..16ac786d --- /dev/null +++ b/tinyusb/hw/bsp/same54xplainedpro/board.mk @@ -0,0 +1,46 @@ +DEPS_SUBMODULES += hw/mcu/microchip + +CONF_CPU_FREQUENCY ?= 48000000 + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mlong-calls \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__SAME54P20A__ \ + -DCONF_CPU_FREQUENCY=$(CONF_CPU_FREQUENCY) \ + -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ + -DBOARD_NAME="\"Microchip SAM E54 Xplained Pro\"" + + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/same54p20a_flash.ld + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + hw/mcu/microchip/same54/gcc/gcc/startup_same54.c \ + hw/mcu/microchip/same54/gcc/system_same54.c \ + hw/mcu/microchip/same54/hal/utils/src/utils_syscalls.c + +INC += \ + $(TOP)/hw/mcu/microchip/same54/ \ + $(TOP)/hw/mcu/microchip/same54/config \ + $(TOP)/hw/mcu/microchip/same54/include \ + $(TOP)/hw/mcu/microchip/same54/hal/include \ + $(TOP)/hw/mcu/microchip/same54/hal/utils/include \ + $(TOP)/hw/mcu/microchip/same54/hpl/port \ + $(TOP)/hw/mcu/microchip/same54/hri \ + $(TOP)/hw/mcu/microchip/same54/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = ATSAME54P20 + +# flash using edbg from https://github.com/ataradov/edbg +flash: $(BUILD)/$(PROJECT).bin + edbg --verbose -t same54 -pv -f $< diff --git a/tinyusb/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/tinyusb/hw/bsp/same54xplainedpro/same54p20a_flash.ld new file mode 100755 index 00000000..97072bfe --- /dev/null +++ b/tinyusb/hw/bsp/same54xplainedpro/same54p20a_flash.ld @@ -0,0 +1,163 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/tinyusb/hw/bsp/same54xplainedpro/same54p20a_sram.ld new file mode 100755 index 00000000..6219f4af --- /dev/null +++ b/tinyusb/hw/bsp/same54xplainedpro/same54p20a_sram.ld @@ -0,0 +1,162 @@ +/** + * \file + * + * \brief Linker script for running in internal SRAM on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > ram + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > ram + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/same54xplainedpro/same54xplainedpro.c b/tinyusb/hw/bsp/same54xplainedpro/same54xplainedpro.c new file mode 100755 index 00000000..4c38fc6e --- /dev/null +++ b/tinyusb/hw/bsp/same54xplainedpro/same54xplainedpro.c @@ -0,0 +1,306 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Jean Gressmann <jean@0x42.de> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <sam.h> +#include "bsp/board.h" + +#include <hal/include/hal_gpio.h> + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_0_Handler(void) +{ + tud_int_handler(0); +} + +void USB_1_Handler(void) +{ + tud_int_handler(0); +} + +void USB_2_Handler(void) +{ + tud_int_handler(0); +} + +void USB_3_Handler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define LED_PIN PIN_PC18 +#define BUTTON_PIN PIN_PB31 +#define BOARD_SERCOM SERCOM2 + +/** Initializes the clocks from the external 12 MHz crystal + * + * The goal of this setup is to preserve the second PLL + * for the application code while still having a reasonable + * 48 MHz clock for USB / UART. + * + * GCLK0: CONF_CPU_FREQUENCY (default 120 MHz) from PLL0 + * GCLK1: unused + * GCLK2: 12 MHz from XOSC1 + * DFLL48M: closed loop from GLCK2 + * GCLK3: 48 MHz + */ +static inline void init_clock_xtal(void) +{ + /* configure for a 12MHz crystal connected to XIN1/XOUT1 */ + OSCCTRL->XOSCCTRL[1].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(2) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 6 = 2Mhz, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000 / 2) - 1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ + GCLK->GENCTRL[0].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ + + // configure GCLK2 for 12MHz from XOSC1 + GCLK->GENCTRL[2].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_XOSC1 | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ + + /* setup DFLL48M to use GLCK2 */ + GCLK->PCHCTRL[OSCCTRL_GCLK_ID_DFLL48].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; + + OSCCTRL->DFLLCTRLA.reg = 0; + while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); + + OSCCTRL->DFLLCTRLB.reg = OSCCTRL_DFLLCTRLB_MODE | OSCCTRL_DFLLCTRLB_WAITLOCK; + OSCCTRL->DFLLMUL.bit.MUL = 4; // 4 * 12MHz -> 48MHz + + OSCCTRL->DFLLCTRLA.reg = + OSCCTRL_DFLLCTRLA_ENABLE | + OSCCTRL_DFLLCTRLA_RUNSTDBY; + while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); + + // setup 48 MHz GCLK3 from DFLL48M + GCLK->GENCTRL[3].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DFLL | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL3); +} + +/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */ +static inline void uart_init(void) +{ + gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); + gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); + + MCLK->APBBMASK.bit.SERCOM2_ = 1; + GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; + + BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); + + BOARD_SERCOM->USART.CTRLA.reg = + SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ + SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ + SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ + SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ + // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ + BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ + + BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +} + +static inline void uart_send_buffer(uint8_t const *text, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM->USART.DATA.reg = text[i]; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) +{ + while (*text) { + BOARD_SERCOM->USART.DATA.reg = *text++; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + + +void board_init(void) +{ + // Uncomment this line and change the GCLK for UART/USB to run off the XTAL. + // init_clock_xtal(); + + SystemCoreClock = CONF_CPU_FREQUENCY; + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + uart_init(); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " UART initialized\n"); + tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); +#endif + + // LED0 init + gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + board_led_write(0); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " LED pin configured\n"); +#endif + + // BTN0 init + gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " Button pin configured\n"); +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + +#if TUSB_OPT_DEVICE_ENABLED +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device enabled\n"); +#endif + + /* USB clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. + */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK0_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB pin init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); + + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device configured\n"); +#endif +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, !state); +} + +uint32_t board_button_read(void) +{ + return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + if (len < 0) { + uart_send_str(buf); + } else { + uart_send_buffer(buf, len); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/same70_xplained/board.mk b/tinyusb/hw/bsp/same70_xplained/board.mk new file mode 100755 index 00000000..c9bc0cea --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/board.mk @@ -0,0 +1,56 @@ +DEPS_SUBMODULES += hw/mcu/microchip + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__SAME70Q21B__ \ + -DCFG_TUSB_MCU=OPT_MCU_SAMX7X + +# suppress following warnings from mcu driver +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align + +ASF_DIR = hw/mcu/microchip/same70 + +# All source paths should be relative to the top level. +LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld + +SRC_C += \ + src/portable/microchip/samx7x/dcd_samx7x.c \ + $(ASF_DIR)/same70b/gcc/gcc/startup_same70q21b.c \ + $(ASF_DIR)/same70b/gcc/system_same70q21b.c \ + $(ASF_DIR)/hpl/core/hpl_init.c \ + $(ASF_DIR)/hpl/usart/hpl_usart.c \ + $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ + $(ASF_DIR)/hal/src/hal_usart_async.c \ + $(ASF_DIR)/hal/src/hal_io.c \ + $(ASF_DIR)/hal/src/hal_atomic.c \ + $(ASF_DIR)/hal/utils/src/utils_ringbuffer.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(ASF_DIR) \ + $(TOP)/$(ASF_DIR)/config \ + $(TOP)/$(ASF_DIR)/same70b/include \ + $(TOP)/$(ASF_DIR)/hal/include \ + $(TOP)/$(ASF_DIR)/hal/utils/include \ + $(TOP)/$(ASF_DIR)/hpl/core \ + $(TOP)/$(ASF_DIR)/hpl/pio \ + $(TOP)/$(ASF_DIR)/hpl/pmc \ + $(TOP)/$(ASF_DIR)/hri \ + $(TOP)/$(ASF_DIR)/CMSIS/Core/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = SAME70Q21B + +# flash using edbg from https://github.com/ataradov/edbg +# Note: SAME70's GPNVM1 must be set to 1 to boot from flash with +# edbg -t same70 -F w0,1,1 +flash: $(BUILD)/$(PROJECT).bin + edbg --verbose -t same70 -pv -f $< diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_pmc_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_pmc_config.h new file mode 100755 index 00000000..387aaa5d --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/hpl_pmc_config.h @@ -0,0 +1,1053 @@ +/* Auto-generated config file hpl_pmc_config.h */ +#ifndef HPL_PMC_CONFIG_H +#define HPL_PMC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <peripheral_clk_config.h> + +#define CLK_SRC_OPTION_OSC32K 0 +#define CLK_SRC_OPTION_XOSC32K 1 +#define CLK_SRC_OPTION_OSC12M 2 +#define CLK_SRC_OPTION_XOSC20M 3 + +#define CLK_SRC_OPTION_SLCK 0 +#define CLK_SRC_OPTION_MAINCK 1 +#define CLK_SRC_OPTION_PLLACK 2 +#define CLK_SRC_OPTION_UPLLCKDIV 3 +#define CLK_SRC_OPTION_MCK 4 + +#define CLK_SRC_OPTION_UPLLCK 3 + +#define CONF_RC_4M 0 +#define CONF_RC_8M 1 +#define CONF_RC_12M 2 + +#define CONF_XOSC32K_NO_BYPASS 0 +#define CONF_XOSC32K_BYPASS 1 + +#define CONF_XOSC20M_NO_BYPASS 0 +#define CONF_XOSC20M_BYPASS 1 + +// <e> Clock_SLCK configuration +// <i> Indicates whether SLCK configuration is enabled or not +// <id> enable_clk_gen_slck +#ifndef CONF_CLK_SLCK_CONFIG +#define CONF_CLK_SLCK_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator SLCK source + +// <CLK_SRC_OPTION_OSC32K"> 32kHz High Accuracy Internal Oscillator (OSC32K) + +// <CLK_SRC_OPTION_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) + +// <i> This defines the clock source for SLCK +// <id> clk_gen_slck_oscillator +#ifndef CONF_CLK_GEN_SLCK_SRC +#define CONF_CLK_GEN_SLCK_SRC CLK_SRC_OPTION_OSC32K +#endif + +// <q> Enable Clock_SLCK +// <i> Indicates whether SLCK is enabled or disable +// <id> clk_gen_slck_arch_enable +#ifndef CONF_CLK_SLCK_ENABLE +#define CONF_CLK_SLCK_ENABLE 1 +#endif + +// </h> + +// <h> + +// </h> +// </e>// <e> Clock_MAINCK configuration +// <i> Indicates whether MAINCK configuration is enabled or not +// <id> enable_clk_gen_mainck +#ifndef CONF_CLK_MAINCK_CONFIG +#define CONF_CLK_MAINCK_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator MAINCK source + +// <CLK_SRC_OPTION_OSC12M"> Embedded 4/8/12MHz RC Oscillator (OSC12M) + +// <CLK_SRC_OPTION_XOSC20M"> External 3-20MHz Oscillator (XOSC20M) + +// <i> This defines the clock source for MAINCK +// <id> clk_gen_mainck_oscillator +#ifndef CONF_CLK_GEN_MAINCK_SRC +#define CONF_CLK_GEN_MAINCK_SRC CLK_SRC_OPTION_XOSC20M +#endif + +// <q> Enable Clock_MAINCK +// <i> Indicates whether MAINCK is enabled or disable +// <id> clk_gen_mainck_arch_enable +#ifndef CONF_CLK_MAINCK_ENABLE +#define CONF_CLK_MAINCK_ENABLE 1 +#endif + +// <q> Enable Main Clock Failure Detection +// <i> Indicates whether Main Clock Failure Detection is enabled or disable. +// <i> The 4/8/12 MHz RC oscillator must be selected as the source of MAINCK. +// <id> clk_gen_cfden_enable +#ifndef CONF_CLK_CFDEN_ENABLE +#define CONF_CLK_CFDEN_ENABLE 0 +#endif + +// </h> + +// <h> + +// </h> +// </e>// <e> Clock_MCKR configuration +// <i> Indicates whether MCKR configuration is enabled or not +// <id> enable_clk_gen_mckr +#ifndef CONF_CLK_MCKR_CONFIG +#define CONF_CLK_MCKR_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator MCKR source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <i> This defines the clock source for MCKR +// <id> clk_gen_mckr_oscillator +#ifndef CONF_CLK_GEN_MCKR_SRC +#define CONF_CLK_GEN_MCKR_SRC CLK_SRC_OPTION_PLLACK +#endif + +// <q> Enable Clock_MCKR +// <i> Indicates whether MCKR is enabled or disable +// <id> clk_gen_mckr_arch_enable +#ifndef CONF_CLK_MCKR_ENABLE +#define CONF_CLK_MCKR_ENABLE 1 +#endif + +// </h> + +// <h> + +// <o> Master Clock Prescaler +// <0=> 1 +// <1=> 2 +// <2=> 4 +// <3=> 8 +// <4=> 16 +// <5=> 32 +// <6=> 64 +// <7=> 3 +// <i> Select the clock prescaler. +// <id> mckr_presc +#ifndef CONF_MCKR_PRESC +#define CONF_MCKR_PRESC 0 +#endif + +// </h> +// </e>// <e> Clock_MCK configuration +// <i> Indicates whether MCK configuration is enabled or not +// <id> enable_clk_gen_mck +#ifndef CONF_CLK_MCK_CONFIG +#define CONF_CLK_MCK_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator MCK source + +// <CLK_SRC_OPTION_MCKR"> Master Clock Controller (PMC_MCKR) + +// <i> This defines the clock source for MCK +// <id> clk_gen_mck_oscillator +#ifndef CONF_CLK_GEN_MCK_SRC +#define CONF_CLK_GEN_MCK_SRC CLK_SRC_OPTION_MCKR +#endif + +// </h> + +// <h> + +//<o> Master Clock Controller Divider MCK divider +// <0=> 1 +// <1=> 2 +// <3=> 3 +// <2=> 4 +// <i> Select the master clock divider. +// <id> mck_div +#ifndef CONF_MCK_DIV +#define CONF_MCK_DIV 1 +#endif + +// </h> +// </e>// <e> Clock_SYSTICK configuration +// <i> Indicates whether SYSTICK configuration is enabled or not +// <id> enable_clk_gen_systick +#ifndef CONF_CLK_SYSTICK_CONFIG +#define CONF_CLK_SYSTICK_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator SYSTICK source + +// <CLK_SRC_OPTION_MCKR"> Master Clock Controller (PMC_MCKR) + +// <i> This defines the clock source for SYSTICK +// <id> clk_gen_systick_oscillator +#ifndef CONF_CLK_GEN_SYSTICK_SRC +#define CONF_CLK_GEN_SYSTICK_SRC CLK_SRC_OPTION_MCKR +#endif + +// </h> + +// <h> + +// <o> Systick clock divider +// <8=> 8 +// <i> Select systick clock divider +// <id> systick_clock_div +#ifndef CONF_SYSTICK_DIV +#define CONF_SYSTICK_DIV 8 +#endif + +// </h> +// </e>// <e> Clock_FCLK configuration +// <i> Indicates whether FCLK configuration is enabled or not +// <id> enable_clk_gen_fclk +#ifndef CONF_CLK_FCLK_CONFIG +#define CONF_CLK_FCLK_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator FCLK source + +// <CLK_SRC_OPTION_MCKR"> Master Clock Controller (PMC_MCKR) + +// <i> This defines the clock source for FCLK +// <id> clk_gen_fclk_oscillator +#ifndef CONF_CLK_GEN_FCLK_SRC +#define CONF_CLK_GEN_FCLK_SRC CLK_SRC_OPTION_MCKR +#endif + +// </h> + +// <h> + +// </h> +// </e>// <e> Clock_GCLK0 configuration +// <i> Indicates whether GCLK0 configuration is enabled or not +// <id> enable_clk_gen_gclk0 +#ifndef CONF_CLK_GCLK0_CONFIG +#define CONF_CLK_GCLK0_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator GCLK0 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCK"> USB 480M Clock (UPLLCK) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for GCLK0 +// <id> clk_gen_gclk0_oscillator +#ifndef CONF_CLK_GEN_GCLK0_SRC +#define CONF_CLK_GEN_GCLK0_SRC CLK_SRC_OPTION_MCK +#endif + +// <q> Enable Clock_GCLK0 +// <i> Indicates whether GCLK0 is enabled or disable +// <id> clk_gen_gclk0_arch_enable +#ifndef CONF_CLK_GCLK0_ENABLE +#define CONF_CLK_GCLK0_ENABLE 1 +#endif + +// </h> + +// <h> +// <q> Enable GCLK0 GCLKEN +// <i> Indicates whether GCLK0 GCLKEN is enabled or disable +// <id> gclk0_gclken_enable +#ifndef CONF_GCLK0_GCLKEN_ENABLE +#define CONF_GCLK0_GCLKEN_ENABLE 0 +#endif + +// <o> Generic Clock GCLK0 divider <1-256> +// <i> Select the clock divider (divider = GCLKDIV + 1). +// <id> gclk0_div +#ifndef CONF_GCLK0_DIV +#define CONF_GCLK0_DIV 2 +#endif + +// </h> +// </e>// <e> Clock_GCLK1 configuration +// <i> Indicates whether GCLK1 configuration is enabled or not +// <id> enable_clk_gen_gclk1 +#ifndef CONF_CLK_GCLK1_CONFIG +#define CONF_CLK_GCLK1_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator GCLK1 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCK"> USB 480M Clock (UPLLCK) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for GCLK1 +// <id> clk_gen_gclk1_oscillator +#ifndef CONF_CLK_GEN_GCLK1_SRC +#define CONF_CLK_GEN_GCLK1_SRC CLK_SRC_OPTION_PLLACK +#endif + +// <q> Enable Clock_GCLK1 +// <i> Indicates whether GCLK1 is enabled or disable +// <id> clk_gen_gclk1_arch_enable +#ifndef CONF_CLK_GCLK1_ENABLE +#define CONF_CLK_GCLK1_ENABLE 1 +#endif + +// </h> + +// <h> +// <q> Enable GCLK1 GCLKEN +// <i> Indicates whether GCLK1 GCLKEN is enabled or disable +// <id> gclk1_gclken_enable +#ifndef CONF_GCLK1_GCLKEN_ENABLE +#define CONF_GCLK1_GCLKEN_ENABLE 0 +#endif + +// <o> Generic Clock GCLK1 divider <1-256> +// <i> Select the clock divider (divider = GCLKDIV + 1). +// <id> gclk1_div +#ifndef CONF_GCLK1_DIV +#define CONF_GCLK1_DIV 3 +#endif + +// </h> +// </e>// <e> Clock_PCK0 configuration +// <i> Indicates whether PCK0 configuration is enabled or not +// <id> enable_clk_gen_pck0 +#ifndef CONF_CLK_PCK0_CONFIG +#define CONF_CLK_PCK0_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK0 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK0 +// <id> clk_gen_pck0_oscillator +#ifndef CONF_CLK_GEN_PCK0_SRC +#define CONF_CLK_GEN_PCK0_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK0 +// <i> Indicates whether PCK0 is enabled or disable +// <id> clk_gen_pck0_arch_enable +#ifndef CONF_CLK_PCK0_ENABLE +#define CONF_CLK_PCK0_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck0_presc +#ifndef CONF_PCK0_PRESC +#define CONF_PCK0_PRESC 1 +#endif + +// </h> +// </e>// <e> Clock_PCK1 configuration +// <i> Indicates whether PCK1 configuration is enabled or not +// <id> enable_clk_gen_pck1 +#ifndef CONF_CLK_PCK1_CONFIG +#define CONF_CLK_PCK1_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK1 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK1 +// <id> clk_gen_pck1_oscillator +#ifndef CONF_CLK_GEN_PCK1_SRC +#define CONF_CLK_GEN_PCK1_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK1 +// <i> Indicates whether PCK1 is enabled or disable +// <id> clk_gen_pck1_arch_enable +#ifndef CONF_CLK_PCK1_ENABLE +#define CONF_CLK_PCK1_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck1_presc +#ifndef CONF_PCK1_PRESC +#define CONF_PCK1_PRESC 2 +#endif + +// </h> +// </e>// <e> Clock_PCK2 configuration +// <i> Indicates whether PCK2 configuration is enabled or not +// <id> enable_clk_gen_pck2 +#ifndef CONF_CLK_PCK2_CONFIG +#define CONF_CLK_PCK2_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK2 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK2 +// <id> clk_gen_pck2_oscillator +#ifndef CONF_CLK_GEN_PCK2_SRC +#define CONF_CLK_GEN_PCK2_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK2 +// <i> Indicates whether PCK2 is enabled or disable +// <id> clk_gen_pck2_arch_enable +#ifndef CONF_CLK_PCK2_ENABLE +#define CONF_CLK_PCK2_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck2_presc +#ifndef CONF_PCK2_PRESC +#define CONF_PCK2_PRESC 3 +#endif + +// </h> +// </e>// <e> Clock_PCK3 configuration +// <i> Indicates whether PCK3 configuration is enabled or not +// <id> enable_clk_gen_pck3 +#ifndef CONF_CLK_PCK3_CONFIG +#define CONF_CLK_PCK3_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK3 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK3 +// <id> clk_gen_pck3_oscillator +#ifndef CONF_CLK_GEN_PCK3_SRC +#define CONF_CLK_GEN_PCK3_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK3 +// <i> Indicates whether PCK3 is enabled or disable +// <id> clk_gen_pck3_arch_enable +#ifndef CONF_CLK_PCK3_ENABLE +#define CONF_CLK_PCK3_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck3_presc +#ifndef CONF_PCK3_PRESC +#define CONF_PCK3_PRESC 4 +#endif + +// </h> +// </e>// <e> Clock_PCK4 configuration +// <i> Indicates whether PCK4 configuration is enabled or not +// <id> enable_clk_gen_pck4 +#ifndef CONF_CLK_PCK4_CONFIG +#define CONF_CLK_PCK4_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK4 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK4 +// <id> clk_gen_pck4_oscillator +#ifndef CONF_CLK_GEN_PCK4_SRC +#define CONF_CLK_GEN_PCK4_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK4 +// <i> Indicates whether PCK4 is enabled or disable +// <id> clk_gen_pck4_arch_enable +#ifndef CONF_CLK_PCK4_ENABLE +#define CONF_CLK_PCK4_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck4_presc +#ifndef CONF_PCK4_PRESC +#define CONF_PCK4_PRESC 5 +#endif + +// </h> +// </e>// <e> Clock_PCK5 configuration +// <i> Indicates whether PCK5 configuration is enabled or not +// <id> enable_clk_gen_pck5 +#ifndef CONF_CLK_PCK5_CONFIG +#define CONF_CLK_PCK5_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK5 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK5 +// <id> clk_gen_pck5_oscillator +#ifndef CONF_CLK_GEN_PCK5_SRC +#define CONF_CLK_GEN_PCK5_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK5 +// <i> Indicates whether PCK5 is enabled or disable +// <id> clk_gen_pck5_arch_enable +#ifndef CONF_CLK_PCK5_ENABLE +#define CONF_CLK_PCK5_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck5_presc +#ifndef CONF_PCK5_PRESC +#define CONF_PCK5_PRESC 6 +#endif + +// </h> +// </e>// <e> Clock_PCK6 configuration +// <i> Indicates whether PCK6 configuration is enabled or not +// <id> enable_clk_gen_pck6 +#ifndef CONF_CLK_PCK6_CONFIG +#define CONF_CLK_PCK6_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator PCK6 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) + +// <i> This defines the clock source for PCK6 +// <id> clk_gen_pck6_oscillator +#ifndef CONF_CLK_GEN_PCK6_SRC +#define CONF_CLK_GEN_PCK6_SRC CLK_SRC_OPTION_MAINCK +#endif + +// <q> Enable Clock_PCK6 +// <i> Indicates whether PCK6 is enabled or disable +// <id> clk_gen_pck6_arch_enable +#ifndef CONF_CLK_PCK6_ENABLE +#define CONF_CLK_PCK6_ENABLE 0 +#endif + +// </h> + +// <h> + +// <o> Programmable Clock Controller Prescaler <1-256> +// <i> Select the clock prescaler (prescaler = PRESC + 1). +// <id> pck6_presc +#ifndef CONF_PCK6_PRESC +#define CONF_PCK6_PRESC 7 +#endif + +// </h> +// </e>// <e> Clock_USB_480M configuration +// <i> Indicates whether USB_480M configuration is enabled or not +// <id> enable_clk_gen_usb_480m +#ifndef CONF_CLK_USB_480M_CONFIG +#define CONF_CLK_USB_480M_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator USB_480M source + +// <CLK_SRC_OPTION_UPLLCK"> USB 480M Clock (UPLLCK) + +// <i> This defines the clock source for USB_480M +// <id> clk_gen_usb_480m_oscillator +#ifndef CONF_CLK_GEN_USB_480M_SRC +#define CONF_CLK_GEN_USB_480M_SRC CLK_SRC_OPTION_UPLLCK +#endif + +// </h> + +// <h> + +// </h> +// </e>// <e> Clock_USB_48M configuration +// <i> Indicates whether USB_48M configuration is enabled or not +// <id> enable_clk_gen_usb_48m +#ifndef CONF_CLK_USB_48M_CONFIG +#define CONF_CLK_USB_48M_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator USB_48M source + +// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) + +// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) + +// <i> This defines the clock source for USB_48M +// <id> clk_gen_usb_48m_oscillator +#ifndef CONF_CLK_GEN_USB_48M_SRC +#define CONF_CLK_GEN_USB_48M_SRC CLK_SRC_OPTION_UPLLCKDIV +#endif + +// <q> Enable Clock_USB_48M +// <i> Indicates whether USB_48M is enabled or disable +// <id> clk_gen_usb_48m_arch_enable +#ifndef CONF_CLK_USB_48M_ENABLE +#define CONF_CLK_USB_48M_ENABLE 1 +#endif + +// </h> + +// <h> + +// <o> USB Clock Controller Divider <1-16> +// <i> Select the USB clock divider (divider = USBDIV + 1). +// <id> usb_48m_div +#ifndef CONF_USB_48M_DIV +#define CONF_USB_48M_DIV 5 +#endif + +// </h> +// </e>// <e> Clock_SLCK2 configuration +// <i> Indicates whether SLCK2 configuration is enabled or not +// <id> enable_clk_gen_slck2 +#ifndef CONF_CLK_SLCK2_CONFIG +#define CONF_CLK_SLCK2_CONFIG 1 +#endif + +//<h> Clock Generator +// <y> clock generator SLCK2 source + +// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) + +// <i> This defines the clock source for SLCK2 +// <id> clk_gen_slck2_oscillator +#ifndef CONF_CLK_GEN_SLCK2_SRC +#define CONF_CLK_GEN_SLCK2_SRC CLK_SRC_OPTION_SLCK +#endif + +// </h> + +// <h> + +// </h> +// </e> + +// <e> System Configuration +// <i> Indicates whether configuration for system is enabled or not +// <id> enable_hclk_clock +#ifndef CONF_SYSTEM_CONFIG +#define CONF_SYSTEM_CONFIG 1 +#endif + +// <h> Processor Clock Settings +// <y> Processor Clock source +// <MCKR"> Master Clock Controller (PMC_MCKR) +// <i> This defines the clock source for the HCLK (Processor clock) +// <id> hclk_clock_source +#ifndef CONF_HCLK_SRC +#define CONF_HCLK_SRC MCKR +#endif + +// <o> Flash Wait State +// <0=> 1 cycle +// <1=> 2 cycles +// <2=> 3 cycles +// <3=> 4 cycles +// <4=> 5 cycles +// <5=> 6 cycles +// <6=> 7 cycles +// <i> This field defines the number of wait states for read and write operations. +// <id> efc_fws +#ifndef CONF_EFC_WAIT_STATE +#define CONF_EFC_WAIT_STATE 5 +#endif + +// </h> +// </e> + +// <e> SysTick Clock +// <id> enable_systick_clk_clock +#ifndef CONF_SYSTICK_CLK_CONFIG +#define CONF_SYSTICK_CLK_CONFIG 1 +#endif + +// <y> SysTick Clock source +// <MCKR"> Master Clock Controller (PMC_MCKR) +// <i> This defines the clock source for the SysTick Clock +// <id> systick_clk_clock_source +#ifndef CONF_SYSTICK_CLK_SRC +#define CONF_SYSTICK_CLK_SRC MCKR +#endif + +// <o> SysTick Clock Divider +// <8=> 8 +// <i> Fixed to 8 if Systick is not using Processor clock +// <id> systick_clk_clock_div +#ifndef CONF_SYSTICK_CLK_DIV +#define CONF_SYSTICK_CLK_DIV 8 +#endif + +// </e> + +// <e> OSC32K Oscillator Configuration +// <i> Indicates whether configuration for OSC32K is enabled or not +// <id> enable_osc32k +#ifndef CONF_OSC32K_CONFIG +#define CONF_OSC32K_CONFIG 1 +#endif + +// <h> OSC32K Oscillator Control +// <q> OSC32K Oscillator Enable +// <i> Indicates whether OSC32K Oscillator is enabled or not +// <id> osc32k_arch_enable +#ifndef CONF_OSC32K_ENABLE +#define CONF_OSC32K_ENABLE 0 +#endif +// </h> +// </e> + +// <e> XOSC32K Oscillator Configuration +// <i> Indicates whether configuration for XOSC32K is enabled or not +// <id> enable_xosc32k +#ifndef CONF_XOSC32K_CONFIG +#define CONF_XOSC32K_CONFIG 0 +#endif + +// <h> XOSC32K Oscillator Control +// <y> Oscillator Bypass Select +// <CONF_XOSC32K_NO_BYPASS"> The 32kHz crystal oscillator is not bypassed. +// <CONF_XOSC32K_BYPASS"> The 32kHz crystal oscillator is bypassed. +// <i> Indicates whether XOSC32K is bypassed. +// <id> xosc32k_bypass +#ifndef CONF_XOSC32K +#define CONF_XOSC32K CONF_XOSC32K_NO_BYPASS +#endif + +// <q> XOSC32K Oscillator Enable +// <i> Indicates whether XOSC32K Oscillator is enabled or not +// <id> xosc32k_arch_enable +#ifndef CONF_XOSC32K_ENABLE +#define CONF_XOSC32K_ENABLE 0 +#endif +// </h> +// </e> + +// <e> OSC12M Oscillator Configuration +// <i> Indicates whether configuration for OSC12M is enabled or not +// <id> enable_osc12m +#ifndef CONF_OSC12M_CONFIG +#define CONF_OSC12M_CONFIG 0 +#endif + +// <h> OSC12M Oscillator Control +// <q> OSC12M Oscillator Enable +// <i> Indicates whether OSC12M Oscillator is enabled or not. +// <id> osc12m_arch_enable +#ifndef CONF_OSC12M_ENABLE +#define CONF_OSC12M_ENABLE 0 +#endif + +// <o> OSC12M selector +// <0=> 4000000 +// <1=> 8000000 +// <2=> 12000000 +// <i> Select the frequency of embedded fast RC oscillator. +// <id> osc12m_selector +#ifndef CONF_OSC12M_SELECTOR +#define CONF_OSC12M_SELECTOR 2 +#endif +// </h> +// </e> + +// <e> XOSC20M Oscillator Configuration +// <i> Indicates whether configuration for XOSC20M is enabled or not. +// <id> enable_xosc20m +#ifndef CONF_XOSC20M_CONFIG +#define CONF_XOSC20M_CONFIG 1 +#endif + +// <h> XOSC20M Oscillator Control +// <o> XOSC20M selector <3000000-20000000> +// <i> Select the frequency of crystal or ceramic resonator oscillator. +// <id> xosc20m_selector +#ifndef CONF_XOSC20M_SELECTOR +#define CONF_XOSC20M_SELECTOR 12000000 +#endif + +// <o> Start up time for the external oscillator (ms): <0-256> +// <i> Select start-up time. +// <id> xosc20m_startup_time +#ifndef CONF_XOSC20M_STARTUP_TIME +#define CONF_XOSC20M_STARTUP_TIME 62 +#endif + +// <y> Oscillator Bypass Select +// <CONF_XOSC20M_NO_BYPASS"> The external crystal oscillator is not bypassed. +// <CONF_XOSC20M_BYPASS"> The external crystal oscillator is bypassed. +// <i> Indicates whether XOSC20M is bypassed. +// <id> xosc20m_bypass +#ifndef CONF_XOSC20M +#define CONF_XOSC20M CONF_XOSC20M_NO_BYPASS +#endif + +// <q> XOSC20M Oscillator Enable +// <i> Indicates whether XOSC20M Oscillator is enabled or not +// <id> xosc20m_arch_enable +#ifndef CONF_XOSC20M_ENABLE +#define CONF_XOSC20M_ENABLE 1 +#endif +// </h> +// </e> + +// <e> PLLACK Oscillator Configuration +// <i> Indicates whether configuration for PLLACK is enabled or not +// <id> enable_pllack +#ifndef CONF_PLLACK_CONFIG +#define CONF_PLLACK_CONFIG 1 +#endif + +// <y> PLLACK Reference Clock Source +// <MAINCK"> Main Clock (MAINCK) +// <i> Select the clock source. +// <id> pllack_ref_clock +#ifndef CONF_PLLACK_CLK +#define CONF_PLLACK_CLK MAINCK +#endif + +// <h> PLLACK Oscillator Control +// <q> PLLACK Oscillator Enable +// <i> Indicates whether PLLACK Oscillator is enabled or not +// <id> pllack_arch_enable +#ifndef CONF_PLLACK_ENABLE +#define CONF_PLLACK_ENABLE 1 +#endif + +// <o> PLLA Frontend Divider (DIVA) <1-255> +// <i> Select the clock divider +// <id> pllack_div +#ifndef CONF_PLLACK_DIV +#define CONF_PLLACK_DIV 1 +#endif + +// <o> PLLACK Muliplier <1-62> +// <i> Indicates PLLA multiplier (multiplier = MULA + 1). +// <id> pllack_mul +#ifndef CONF_PLLACK_MUL +#define CONF_PLLACK_MUL 25 +#endif +// </h> +// </e> + +// <e> UPLLCK Oscillator Configuration +// <i> Indicates whether configuration for UPLLCK is enabled or not +// <id> enable_upllck +#ifndef CONF_UPLLCK_CONFIG +#define CONF_UPLLCK_CONFIG 1 +#endif + +// <y> UPLLCK Reference Clock Source +// <XOSC20M"> External 3-20MHz Oscillator (XOSC20M) +// <i> Select the clock source,only when the input frequency is 12M or 16M, the upllck output is 480M. +// <id> upllck_ref_clock +#ifndef CONF_UPLLCK_CLK +#define CONF_UPLLCK_CLK XOSC20M +#endif + +// <h> UPLLCK Oscillator Control +// <q> UPLLCK Oscillator Enable +// <i> Indicates whether UPLLCK Oscillator is enabled or not +// <id> upllck_arch_enable +#ifndef CONF_UPLLCK_ENABLE +#define CONF_UPLLCK_ENABLE 1 +#endif +// </h> +// </e> + +// <e> UPLLCKDIV Oscillator Configuration +// <i> Indicates whether configuration for UPLLCKDIV is enabled or not +// <id> enable_upllckdiv +#ifndef CONF_UPLLCKDIV_CONFIG +#define CONF_UPLLCKDIV_CONFIG 1 +#endif + +// <y> UPLLCKDIV Reference Clock Source +// <UPLLCK"> USB 480M Clock (UPLLCK) +// <i> Select the clock source. +// <id> upllckdiv_ref_clock +#ifndef CONF_UPLLCKDIV_CLK +#define CONF_UPLLCKDIV_CLK UPLLCK +#endif + +// <h> UPLLCKDIV Oscillator Control +// <o> UPLLCKDIV Clock Divider +// <0=> 1 +// <1=> 2 +// <i> Select the clock divider. +// <id> upllckdiv_div +#ifndef CONF_UPLLCKDIV_DIV +#define CONF_UPLLCKDIV_DIV 1 +#endif +// </h> +// </e> + +// <e> MCK/8 +// <id> enable_mck_div_8 +#ifndef CONF_MCK_DIV_8_CONFIG +#define CONF_MCK_DIV_8_CONFIG 0 +#endif + +// <o> MCK/8 Source +// <0=> Master Clock (MCK) +// <id> mck_div_8_src +#ifndef CONF_MCK_DIV_8_SRC +#define CONF_MCK_DIV_8_SRC 0 +#endif +// </e> + +// <e> External Clock Input Configuration +// <id> enable_dummy_ext +#ifndef CONF_DUMMY_EXT_CONFIG +#define CONF_DUMMY_EXT_CONFIG 1 +#endif + +// <o> External Clock Input Source +// <i> All here are dummy values +// <i> Refer to the peripherals settings for actual input information +// <0=> Specific clock input from specific pin +// <id> dummy_ext_src +#ifndef CONF_DUMMY_EXT_SRC +#define CONF_DUMMY_EXT_SRC 0 +#endif +// </e> + +// <e> External Clock Configuration +// <id> enable_dummy_ext_clk +#ifndef CONF_DUMMY_EXT_CLK_CONFIG +#define CONF_DUMMY_EXT_CLK_CONFIG 1 +#endif + +// <o> External Clock Source +// <i> All here are dummy values +// <i> Refer to the peripherals settings for actual input information +// <0=> External Clock Input +// <id> dummy_ext_clk_src +#ifndef CONF_DUMMY_EXT_CLK_SRC +#define CONF_DUMMY_EXT_CLK_SRC 0 +#endif +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_PMC_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h new file mode 100755 index 00000000..50ca3f15 --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h @@ -0,0 +1,215 @@ +/* Auto-generated config file hpl_usart_config.h */ +#ifndef HPL_USART_CONFIG_H +#define HPL_USART_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <peripheral_clk_config.h> + +#ifndef CONF_USART_1_ENABLE +#define CONF_USART_1_ENABLE 1 +#endif + +// <h> Basic Configuration + +// <o> Frame parity +// <0x0=>Even parity +// <0x1=>Odd parity +// <0x2=>Parity forced to 0 +// <0x3=>Parity forced to 1 +// <0x4=>No parity +// <i> Parity bit mode for USART frame +// <id> usart_parity +#ifndef CONF_USART_1_PARITY +#define CONF_USART_1_PARITY 0x4 +#endif + +// <o> Character Size +// <0x0=>5 bits +// <0x1=>6 bits +// <0x2=>7 bits +// <0x3=>8 bits +// <i> Data character size in USART frame +// <id> usart_character_size +#ifndef CONF_USART_1_CHSIZE +#define CONF_USART_1_CHSIZE 0x3 +#endif + +// <o> Stop Bit +// <0=>1 stop bit +// <1=>1.5 stop bits +// <2=>2 stop bits +// <i> Number of stop bits in USART frame +// <id> usart_stop_bit +#ifndef CONF_USART_1_SBMODE +#define CONF_USART_1_SBMODE 0 +#endif + +// <o> Clock Output Select +// <0=>The USART does not drive the SCK pin +// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK +// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK. +// <id> usart_clock_output_select +#ifndef CONF_USART_1_CLKO +#define CONF_USART_1_CLKO 0 +#endif + +// <o> Baud rate <1-3000000> +// <i> USART baud rate setting +// <id> usart_baud_rate +#ifndef CONF_USART_1_BAUD +#define CONF_USART_1_BAUD 9600 +#endif + +// </h> + +// <e> Advanced configuration +// <id> usart_advanced +#ifndef CONF_USART_1_ADVANCED_CONFIG +#define CONF_USART_1_ADVANCED_CONFIG 0 +#endif + +// <o> Channel Mode +// <0=>Normal Mode +// <1=>Automatic Echo +// <2=>Local Loopback +// <3=>Remote Loopback +// <i> Channel mode in USART frame +// <id> usart_channel_mode +#ifndef CONF_USART_1_CHMODE +#define CONF_USART_1_CHMODE 0 +#endif + +// <q> 9 bits character enable +// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits. +// <id> usart_9bits_enable +#ifndef CONF_USART_1_MODE9 +#define CONF_USART_1_MODE9 0 +#endif + +// <o> Variable Sync +// <0=>User defined configuration +// <1=>sync field is updated when a character is written into US_THR +// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter +// <id> variable_sync +#ifndef CONF_USART_1_VAR_SYNC +#define CONF_USART_1_VAR_SYNC 0 +#endif + +// <o> Oversampling Mode +// <0=>16 Oversampling +// <1=>8 Oversampling +// <i> Oversampling Mode in UART mode +// <id> usart__oversampling_mode +#ifndef CONF_USART_1_OVER +#define CONF_USART_1_OVER 0 +#endif + +// <o> Inhibit Non Ack +// <0=>The NACK is generated +// <1=>The NACK is not generated +// <i> Inhibit Non Acknowledge +// <id> usart__inack +#ifndef CONF_USART_1_INACK +#define CONF_USART_1_INACK 1 +#endif + +// <o> Disable Successive NACK +// <0=>NACK is sent on the ISO line as soon as a parity error occurs +// <1=>Many parity errors generate a NACK on the ISO line +// <i> Disable Successive NACK +// <id> usart_dsnack +#ifndef CONF_USART_1_DSNACK +#define CONF_USART_1_DSNACK 0 +#endif + +// <o> Inverted Data +// <0=>Data isn't inverted, nomal mode +// <1=>Data is inverted +// <i> Inverted Data +// <id> usart_invdata +#ifndef CONF_USART_1_INVDATA +#define CONF_USART_1_INVDATA 0 +#endif + +// <o> Maximum Number of Automatic Iteration <0-7> +// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0. +// <id> usart_max_iteration +#ifndef CONF_USART_1_MAX_ITERATION +#define CONF_USART_1_MAX_ITERATION 0 +#endif + +// <q> Receive Line Filter enable +// <i> whether the USART filters the receive line using a three-sample filter +// <id> usart_receive_filter_enable +#ifndef CONF_USART_1_FILTER +#define CONF_USART_1_FILTER 0 +#endif + +// <q> Manchester Encoder/Decoder Enable +// <i> whether the USART Manchester Encoder/Decoder +// <id> usart_manchester_filter_enable +#ifndef CONF_USART_1_MAN +#define CONF_USART_1_MAN 0 +#endif + +// <o> Manchester Synchronization Mode +// <0=>The Manchester start bit is a 0 to 1 transition +// <1=>The Manchester start bit is a 1 to 0 transition +// <i> Manchester Synchronization Mode +// <id> usart_manchester_synchronization_mode +#ifndef CONF_USART_1_MODSYNC +#define CONF_USART_1_MODSYNC 0 +#endif + +// <o> Start Frame Delimiter Selector +// <0=>Start frame delimiter is COMMAND or DATA SYNC +// <1=>Start frame delimiter is one bit +// <i> Start Frame Delimiter Selector +// <id> usart_start_frame_delimiter +#ifndef CONF_USART_1_ONEBIT +#define CONF_USART_1_ONEBIT 0 +#endif + +// <o> Fractional Part <0-7> +// <i> Fractional part of the baud rate if baud rate generator is in fractional mode +// <id> usart_arch_fractional +#ifndef CONF_USART_1_FRACTIONAL +#define CONF_USART_1_FRACTIONAL 0x0 +#endif + +// <o> Data Order +// <0=>LSB is transmitted first +// <1=>MSB is transmitted first +// <i> Data order of the data bits in the frame +// <id> usart_arch_msbf +#ifndef CONF_USART_1_MSBF +#define CONF_USART_1_MSBF 0 +#endif + +// </e> + +#define CONF_USART_1_MODE 0x0 + +// Calculate BAUD register value in UART mode +#if CONF_USART1_CK_SRC < 3 +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP \ + ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) +#endif +#elif CONF_USART1_CK_SRC == 3 +// No division is active. The value written in US_BRGR has no effect. +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD 1 +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP 1 +#endif +#endif + +// <<< end of configuration section >>> + +#endif // HPL_USART_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_xdmac_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_xdmac_config.h new file mode 100755 index 00000000..a3d62c6f --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/hpl_xdmac_config.h @@ -0,0 +1,4400 @@ +/* Auto-generated config file hpl_xdmac_config.h */ +#ifndef HPL_XDMAC_CONFIG_H +#define HPL_XDMAC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// <e> XDMAC enable +// <i> Indicates whether xdmac is enabled or not +// <id> xdmac_enable +#ifndef CONF_DMA_ENABLE +#define CONF_DMA_ENABLE 0 +#endif + +// <e> Channel 0 settings +// <id> dmac_channel_0_settings +#ifndef CONF_DMAC_CHANNEL_0_SETTINGS +#define CONF_DMAC_CHANNEL_0_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_0 +#ifndef CONF_DMAC_BURSTSIZE_0 +#define CONF_DMAC_BURSTSIZE_0 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_0 +#ifndef CONF_DMAC_CHUNKSIZE_0 +#define CONF_DMAC_CHUNKSIZE_0 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_0 +#ifndef CONF_DMAC_BEATSIZE_0 +#define CONF_DMAC_BEATSIZE_0 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_0 +#ifndef CONF_DMAC_SRC_INTERFACE_0 +#define CONF_DMAC_SRC_INTERFACE_0 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_0 +#ifndef CONF_DMAC_DES_INTERFACE_0 +#define CONF_DMAC_DES_INTERFACE_0 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_0 +#ifndef CONF_DMAC_SRCINC_0 +#define CONF_DMAC_SRCINC_0 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_0 +#ifndef CONF_DMAC_DSTINC_0 +#define CONF_DMAC_DSTINC_0 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_0 +#ifndef CONF_DMAC_TRANS_TYPE_0 +#define CONF_DMAC_TRANS_TYPE_0 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_0 +#ifndef CONF_DMAC_TRIGSRC_0 +#define CONF_DMAC_TRIGSRC_0 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_0 == 0 +#define CONF_DMAC_TYPE_0 0 +#define CONF_DMAC_DSYNC_0 0 +#elif CONF_DMAC_TRANS_TYPE_0 == 1 +#define CONF_DMAC_TYPE_0 1 +#define CONF_DMAC_DSYNC_0 0 +#elif CONF_DMAC_TRANS_TYPE_0 == 2 +#define CONF_DMAC_TYPE_0 1 +#define CONF_DMAC_DSYNC_0 1 +#endif + +#if CONF_DMAC_TRIGSRC_0 == 0xFF +#define CONF_DMAC_SWREQ_0 1 +#else +#define CONF_DMAC_SWREQ_0 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_0_SETTINGS == 1 && CONF_DMAC_BEATSIZE_0 != 2 && ((!CONF_DMAC_SRCINC_0) || (!CONF_DMAC_DSTINC_0))) +#if (!CONF_DMAC_SRCINC_0) +#define CONF_DMAC_SRC_STRIDE_0 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_0) +#define CONF_DMAC_DES_STRIDE_0 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_0 +#define CONF_DMAC_SRC_STRIDE_0 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_0 +#define CONF_DMAC_DES_STRIDE_0 0 +#endif + +// <e> Channel 1 settings +// <id> dmac_channel_1_settings +#ifndef CONF_DMAC_CHANNEL_1_SETTINGS +#define CONF_DMAC_CHANNEL_1_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_1 +#ifndef CONF_DMAC_BURSTSIZE_1 +#define CONF_DMAC_BURSTSIZE_1 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_1 +#ifndef CONF_DMAC_CHUNKSIZE_1 +#define CONF_DMAC_CHUNKSIZE_1 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_1 +#ifndef CONF_DMAC_BEATSIZE_1 +#define CONF_DMAC_BEATSIZE_1 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_1 +#ifndef CONF_DMAC_SRC_INTERFACE_1 +#define CONF_DMAC_SRC_INTERFACE_1 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_1 +#ifndef CONF_DMAC_DES_INTERFACE_1 +#define CONF_DMAC_DES_INTERFACE_1 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_1 +#ifndef CONF_DMAC_SRCINC_1 +#define CONF_DMAC_SRCINC_1 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_1 +#ifndef CONF_DMAC_DSTINC_1 +#define CONF_DMAC_DSTINC_1 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_1 +#ifndef CONF_DMAC_TRANS_TYPE_1 +#define CONF_DMAC_TRANS_TYPE_1 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_1 +#ifndef CONF_DMAC_TRIGSRC_1 +#define CONF_DMAC_TRIGSRC_1 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_1 == 0 +#define CONF_DMAC_TYPE_1 0 +#define CONF_DMAC_DSYNC_1 0 +#elif CONF_DMAC_TRANS_TYPE_1 == 1 +#define CONF_DMAC_TYPE_1 1 +#define CONF_DMAC_DSYNC_1 0 +#elif CONF_DMAC_TRANS_TYPE_1 == 2 +#define CONF_DMAC_TYPE_1 1 +#define CONF_DMAC_DSYNC_1 1 +#endif + +#if CONF_DMAC_TRIGSRC_1 == 0xFF +#define CONF_DMAC_SWREQ_1 1 +#else +#define CONF_DMAC_SWREQ_1 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_1_SETTINGS == 1 && CONF_DMAC_BEATSIZE_1 != 2 && ((!CONF_DMAC_SRCINC_1) || (!CONF_DMAC_DSTINC_1))) +#if (!CONF_DMAC_SRCINC_1) +#define CONF_DMAC_SRC_STRIDE_1 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_1) +#define CONF_DMAC_DES_STRIDE_1 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_1 +#define CONF_DMAC_SRC_STRIDE_1 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_1 +#define CONF_DMAC_DES_STRIDE_1 0 +#endif + +// <e> Channel 2 settings +// <id> dmac_channel_2_settings +#ifndef CONF_DMAC_CHANNEL_2_SETTINGS +#define CONF_DMAC_CHANNEL_2_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_2 +#ifndef CONF_DMAC_BURSTSIZE_2 +#define CONF_DMAC_BURSTSIZE_2 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_2 +#ifndef CONF_DMAC_CHUNKSIZE_2 +#define CONF_DMAC_CHUNKSIZE_2 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_2 +#ifndef CONF_DMAC_BEATSIZE_2 +#define CONF_DMAC_BEATSIZE_2 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_2 +#ifndef CONF_DMAC_SRC_INTERFACE_2 +#define CONF_DMAC_SRC_INTERFACE_2 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_2 +#ifndef CONF_DMAC_DES_INTERFACE_2 +#define CONF_DMAC_DES_INTERFACE_2 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_2 +#ifndef CONF_DMAC_SRCINC_2 +#define CONF_DMAC_SRCINC_2 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_2 +#ifndef CONF_DMAC_DSTINC_2 +#define CONF_DMAC_DSTINC_2 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_2 +#ifndef CONF_DMAC_TRANS_TYPE_2 +#define CONF_DMAC_TRANS_TYPE_2 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_2 +#ifndef CONF_DMAC_TRIGSRC_2 +#define CONF_DMAC_TRIGSRC_2 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_2 == 0 +#define CONF_DMAC_TYPE_2 0 +#define CONF_DMAC_DSYNC_2 0 +#elif CONF_DMAC_TRANS_TYPE_2 == 1 +#define CONF_DMAC_TYPE_2 1 +#define CONF_DMAC_DSYNC_2 0 +#elif CONF_DMAC_TRANS_TYPE_2 == 2 +#define CONF_DMAC_TYPE_2 1 +#define CONF_DMAC_DSYNC_2 1 +#endif + +#if CONF_DMAC_TRIGSRC_2 == 0xFF +#define CONF_DMAC_SWREQ_2 1 +#else +#define CONF_DMAC_SWREQ_2 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_2_SETTINGS == 1 && CONF_DMAC_BEATSIZE_2 != 2 && ((!CONF_DMAC_SRCINC_2) || (!CONF_DMAC_DSTINC_2))) +#if (!CONF_DMAC_SRCINC_2) +#define CONF_DMAC_SRC_STRIDE_2 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_2) +#define CONF_DMAC_DES_STRIDE_2 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_2 +#define CONF_DMAC_SRC_STRIDE_2 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_2 +#define CONF_DMAC_DES_STRIDE_2 0 +#endif + +// <e> Channel 3 settings +// <id> dmac_channel_3_settings +#ifndef CONF_DMAC_CHANNEL_3_SETTINGS +#define CONF_DMAC_CHANNEL_3_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_3 +#ifndef CONF_DMAC_BURSTSIZE_3 +#define CONF_DMAC_BURSTSIZE_3 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_3 +#ifndef CONF_DMAC_CHUNKSIZE_3 +#define CONF_DMAC_CHUNKSIZE_3 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_3 +#ifndef CONF_DMAC_BEATSIZE_3 +#define CONF_DMAC_BEATSIZE_3 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_3 +#ifndef CONF_DMAC_SRC_INTERFACE_3 +#define CONF_DMAC_SRC_INTERFACE_3 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_3 +#ifndef CONF_DMAC_DES_INTERFACE_3 +#define CONF_DMAC_DES_INTERFACE_3 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_3 +#ifndef CONF_DMAC_SRCINC_3 +#define CONF_DMAC_SRCINC_3 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_3 +#ifndef CONF_DMAC_DSTINC_3 +#define CONF_DMAC_DSTINC_3 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_3 +#ifndef CONF_DMAC_TRANS_TYPE_3 +#define CONF_DMAC_TRANS_TYPE_3 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_3 +#ifndef CONF_DMAC_TRIGSRC_3 +#define CONF_DMAC_TRIGSRC_3 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_3 == 0 +#define CONF_DMAC_TYPE_3 0 +#define CONF_DMAC_DSYNC_3 0 +#elif CONF_DMAC_TRANS_TYPE_3 == 1 +#define CONF_DMAC_TYPE_3 1 +#define CONF_DMAC_DSYNC_3 0 +#elif CONF_DMAC_TRANS_TYPE_3 == 2 +#define CONF_DMAC_TYPE_3 1 +#define CONF_DMAC_DSYNC_3 1 +#endif + +#if CONF_DMAC_TRIGSRC_3 == 0xFF +#define CONF_DMAC_SWREQ_3 1 +#else +#define CONF_DMAC_SWREQ_3 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_3_SETTINGS == 1 && CONF_DMAC_BEATSIZE_3 != 2 && ((!CONF_DMAC_SRCINC_3) || (!CONF_DMAC_DSTINC_3))) +#if (!CONF_DMAC_SRCINC_3) +#define CONF_DMAC_SRC_STRIDE_3 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_3) +#define CONF_DMAC_DES_STRIDE_3 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_3 +#define CONF_DMAC_SRC_STRIDE_3 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_3 +#define CONF_DMAC_DES_STRIDE_3 0 +#endif + +// <e> Channel 4 settings +// <id> dmac_channel_4_settings +#ifndef CONF_DMAC_CHANNEL_4_SETTINGS +#define CONF_DMAC_CHANNEL_4_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_4 +#ifndef CONF_DMAC_BURSTSIZE_4 +#define CONF_DMAC_BURSTSIZE_4 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_4 +#ifndef CONF_DMAC_CHUNKSIZE_4 +#define CONF_DMAC_CHUNKSIZE_4 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_4 +#ifndef CONF_DMAC_BEATSIZE_4 +#define CONF_DMAC_BEATSIZE_4 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_4 +#ifndef CONF_DMAC_SRC_INTERFACE_4 +#define CONF_DMAC_SRC_INTERFACE_4 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_4 +#ifndef CONF_DMAC_DES_INTERFACE_4 +#define CONF_DMAC_DES_INTERFACE_4 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_4 +#ifndef CONF_DMAC_SRCINC_4 +#define CONF_DMAC_SRCINC_4 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_4 +#ifndef CONF_DMAC_DSTINC_4 +#define CONF_DMAC_DSTINC_4 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_4 +#ifndef CONF_DMAC_TRANS_TYPE_4 +#define CONF_DMAC_TRANS_TYPE_4 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_4 +#ifndef CONF_DMAC_TRIGSRC_4 +#define CONF_DMAC_TRIGSRC_4 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_4 == 0 +#define CONF_DMAC_TYPE_4 0 +#define CONF_DMAC_DSYNC_4 0 +#elif CONF_DMAC_TRANS_TYPE_4 == 1 +#define CONF_DMAC_TYPE_4 1 +#define CONF_DMAC_DSYNC_4 0 +#elif CONF_DMAC_TRANS_TYPE_4 == 2 +#define CONF_DMAC_TYPE_4 1 +#define CONF_DMAC_DSYNC_4 1 +#endif + +#if CONF_DMAC_TRIGSRC_4 == 0xFF +#define CONF_DMAC_SWREQ_4 1 +#else +#define CONF_DMAC_SWREQ_4 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_4_SETTINGS == 1 && CONF_DMAC_BEATSIZE_4 != 2 && ((!CONF_DMAC_SRCINC_4) || (!CONF_DMAC_DSTINC_4))) +#if (!CONF_DMAC_SRCINC_4) +#define CONF_DMAC_SRC_STRIDE_4 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_4) +#define CONF_DMAC_DES_STRIDE_4 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_4 +#define CONF_DMAC_SRC_STRIDE_4 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_4 +#define CONF_DMAC_DES_STRIDE_4 0 +#endif + +// <e> Channel 5 settings +// <id> dmac_channel_5_settings +#ifndef CONF_DMAC_CHANNEL_5_SETTINGS +#define CONF_DMAC_CHANNEL_5_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_5 +#ifndef CONF_DMAC_BURSTSIZE_5 +#define CONF_DMAC_BURSTSIZE_5 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_5 +#ifndef CONF_DMAC_CHUNKSIZE_5 +#define CONF_DMAC_CHUNKSIZE_5 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_5 +#ifndef CONF_DMAC_BEATSIZE_5 +#define CONF_DMAC_BEATSIZE_5 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_5 +#ifndef CONF_DMAC_SRC_INTERFACE_5 +#define CONF_DMAC_SRC_INTERFACE_5 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_5 +#ifndef CONF_DMAC_DES_INTERFACE_5 +#define CONF_DMAC_DES_INTERFACE_5 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_5 +#ifndef CONF_DMAC_SRCINC_5 +#define CONF_DMAC_SRCINC_5 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_5 +#ifndef CONF_DMAC_DSTINC_5 +#define CONF_DMAC_DSTINC_5 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_5 +#ifndef CONF_DMAC_TRANS_TYPE_5 +#define CONF_DMAC_TRANS_TYPE_5 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_5 +#ifndef CONF_DMAC_TRIGSRC_5 +#define CONF_DMAC_TRIGSRC_5 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_5 == 0 +#define CONF_DMAC_TYPE_5 0 +#define CONF_DMAC_DSYNC_5 0 +#elif CONF_DMAC_TRANS_TYPE_5 == 1 +#define CONF_DMAC_TYPE_5 1 +#define CONF_DMAC_DSYNC_5 0 +#elif CONF_DMAC_TRANS_TYPE_5 == 2 +#define CONF_DMAC_TYPE_5 1 +#define CONF_DMAC_DSYNC_5 1 +#endif + +#if CONF_DMAC_TRIGSRC_5 == 0xFF +#define CONF_DMAC_SWREQ_5 1 +#else +#define CONF_DMAC_SWREQ_5 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_5_SETTINGS == 1 && CONF_DMAC_BEATSIZE_5 != 2 && ((!CONF_DMAC_SRCINC_5) || (!CONF_DMAC_DSTINC_5))) +#if (!CONF_DMAC_SRCINC_5) +#define CONF_DMAC_SRC_STRIDE_5 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_5) +#define CONF_DMAC_DES_STRIDE_5 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_5 +#define CONF_DMAC_SRC_STRIDE_5 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_5 +#define CONF_DMAC_DES_STRIDE_5 0 +#endif + +// <e> Channel 6 settings +// <id> dmac_channel_6_settings +#ifndef CONF_DMAC_CHANNEL_6_SETTINGS +#define CONF_DMAC_CHANNEL_6_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_6 +#ifndef CONF_DMAC_BURSTSIZE_6 +#define CONF_DMAC_BURSTSIZE_6 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_6 +#ifndef CONF_DMAC_CHUNKSIZE_6 +#define CONF_DMAC_CHUNKSIZE_6 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_6 +#ifndef CONF_DMAC_BEATSIZE_6 +#define CONF_DMAC_BEATSIZE_6 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_6 +#ifndef CONF_DMAC_SRC_INTERFACE_6 +#define CONF_DMAC_SRC_INTERFACE_6 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_6 +#ifndef CONF_DMAC_DES_INTERFACE_6 +#define CONF_DMAC_DES_INTERFACE_6 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_6 +#ifndef CONF_DMAC_SRCINC_6 +#define CONF_DMAC_SRCINC_6 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_6 +#ifndef CONF_DMAC_DSTINC_6 +#define CONF_DMAC_DSTINC_6 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_6 +#ifndef CONF_DMAC_TRANS_TYPE_6 +#define CONF_DMAC_TRANS_TYPE_6 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_6 +#ifndef CONF_DMAC_TRIGSRC_6 +#define CONF_DMAC_TRIGSRC_6 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_6 == 0 +#define CONF_DMAC_TYPE_6 0 +#define CONF_DMAC_DSYNC_6 0 +#elif CONF_DMAC_TRANS_TYPE_6 == 1 +#define CONF_DMAC_TYPE_6 1 +#define CONF_DMAC_DSYNC_6 0 +#elif CONF_DMAC_TRANS_TYPE_6 == 2 +#define CONF_DMAC_TYPE_6 1 +#define CONF_DMAC_DSYNC_6 1 +#endif + +#if CONF_DMAC_TRIGSRC_6 == 0xFF +#define CONF_DMAC_SWREQ_6 1 +#else +#define CONF_DMAC_SWREQ_6 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_6_SETTINGS == 1 && CONF_DMAC_BEATSIZE_6 != 2 && ((!CONF_DMAC_SRCINC_6) || (!CONF_DMAC_DSTINC_6))) +#if (!CONF_DMAC_SRCINC_6) +#define CONF_DMAC_SRC_STRIDE_6 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_6) +#define CONF_DMAC_DES_STRIDE_6 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_6 +#define CONF_DMAC_SRC_STRIDE_6 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_6 +#define CONF_DMAC_DES_STRIDE_6 0 +#endif + +// <e> Channel 7 settings +// <id> dmac_channel_7_settings +#ifndef CONF_DMAC_CHANNEL_7_SETTINGS +#define CONF_DMAC_CHANNEL_7_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_7 +#ifndef CONF_DMAC_BURSTSIZE_7 +#define CONF_DMAC_BURSTSIZE_7 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_7 +#ifndef CONF_DMAC_CHUNKSIZE_7 +#define CONF_DMAC_CHUNKSIZE_7 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_7 +#ifndef CONF_DMAC_BEATSIZE_7 +#define CONF_DMAC_BEATSIZE_7 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_7 +#ifndef CONF_DMAC_SRC_INTERFACE_7 +#define CONF_DMAC_SRC_INTERFACE_7 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_7 +#ifndef CONF_DMAC_DES_INTERFACE_7 +#define CONF_DMAC_DES_INTERFACE_7 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_7 +#ifndef CONF_DMAC_SRCINC_7 +#define CONF_DMAC_SRCINC_7 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_7 +#ifndef CONF_DMAC_DSTINC_7 +#define CONF_DMAC_DSTINC_7 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_7 +#ifndef CONF_DMAC_TRANS_TYPE_7 +#define CONF_DMAC_TRANS_TYPE_7 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_7 +#ifndef CONF_DMAC_TRIGSRC_7 +#define CONF_DMAC_TRIGSRC_7 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_7 == 0 +#define CONF_DMAC_TYPE_7 0 +#define CONF_DMAC_DSYNC_7 0 +#elif CONF_DMAC_TRANS_TYPE_7 == 1 +#define CONF_DMAC_TYPE_7 1 +#define CONF_DMAC_DSYNC_7 0 +#elif CONF_DMAC_TRANS_TYPE_7 == 2 +#define CONF_DMAC_TYPE_7 1 +#define CONF_DMAC_DSYNC_7 1 +#endif + +#if CONF_DMAC_TRIGSRC_7 == 0xFF +#define CONF_DMAC_SWREQ_7 1 +#else +#define CONF_DMAC_SWREQ_7 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_7_SETTINGS == 1 && CONF_DMAC_BEATSIZE_7 != 2 && ((!CONF_DMAC_SRCINC_7) || (!CONF_DMAC_DSTINC_7))) +#if (!CONF_DMAC_SRCINC_7) +#define CONF_DMAC_SRC_STRIDE_7 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_7) +#define CONF_DMAC_DES_STRIDE_7 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_7 +#define CONF_DMAC_SRC_STRIDE_7 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_7 +#define CONF_DMAC_DES_STRIDE_7 0 +#endif + +// <e> Channel 8 settings +// <id> dmac_channel_8_settings +#ifndef CONF_DMAC_CHANNEL_8_SETTINGS +#define CONF_DMAC_CHANNEL_8_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_8 +#ifndef CONF_DMAC_BURSTSIZE_8 +#define CONF_DMAC_BURSTSIZE_8 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_8 +#ifndef CONF_DMAC_CHUNKSIZE_8 +#define CONF_DMAC_CHUNKSIZE_8 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_8 +#ifndef CONF_DMAC_BEATSIZE_8 +#define CONF_DMAC_BEATSIZE_8 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_8 +#ifndef CONF_DMAC_SRC_INTERFACE_8 +#define CONF_DMAC_SRC_INTERFACE_8 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_8 +#ifndef CONF_DMAC_DES_INTERFACE_8 +#define CONF_DMAC_DES_INTERFACE_8 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_8 +#ifndef CONF_DMAC_SRCINC_8 +#define CONF_DMAC_SRCINC_8 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_8 +#ifndef CONF_DMAC_DSTINC_8 +#define CONF_DMAC_DSTINC_8 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_8 +#ifndef CONF_DMAC_TRANS_TYPE_8 +#define CONF_DMAC_TRANS_TYPE_8 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_8 +#ifndef CONF_DMAC_TRIGSRC_8 +#define CONF_DMAC_TRIGSRC_8 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_8 == 0 +#define CONF_DMAC_TYPE_8 0 +#define CONF_DMAC_DSYNC_8 0 +#elif CONF_DMAC_TRANS_TYPE_8 == 1 +#define CONF_DMAC_TYPE_8 1 +#define CONF_DMAC_DSYNC_8 0 +#elif CONF_DMAC_TRANS_TYPE_8 == 2 +#define CONF_DMAC_TYPE_8 1 +#define CONF_DMAC_DSYNC_8 1 +#endif + +#if CONF_DMAC_TRIGSRC_8 == 0xFF +#define CONF_DMAC_SWREQ_8 1 +#else +#define CONF_DMAC_SWREQ_8 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_8_SETTINGS == 1 && CONF_DMAC_BEATSIZE_8 != 2 && ((!CONF_DMAC_SRCINC_8) || (!CONF_DMAC_DSTINC_8))) +#if (!CONF_DMAC_SRCINC_8) +#define CONF_DMAC_SRC_STRIDE_8 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_8) +#define CONF_DMAC_DES_STRIDE_8 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_8 +#define CONF_DMAC_SRC_STRIDE_8 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_8 +#define CONF_DMAC_DES_STRIDE_8 0 +#endif + +// <e> Channel 9 settings +// <id> dmac_channel_9_settings +#ifndef CONF_DMAC_CHANNEL_9_SETTINGS +#define CONF_DMAC_CHANNEL_9_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_9 +#ifndef CONF_DMAC_BURSTSIZE_9 +#define CONF_DMAC_BURSTSIZE_9 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_9 +#ifndef CONF_DMAC_CHUNKSIZE_9 +#define CONF_DMAC_CHUNKSIZE_9 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_9 +#ifndef CONF_DMAC_BEATSIZE_9 +#define CONF_DMAC_BEATSIZE_9 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_9 +#ifndef CONF_DMAC_SRC_INTERFACE_9 +#define CONF_DMAC_SRC_INTERFACE_9 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_9 +#ifndef CONF_DMAC_DES_INTERFACE_9 +#define CONF_DMAC_DES_INTERFACE_9 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_9 +#ifndef CONF_DMAC_SRCINC_9 +#define CONF_DMAC_SRCINC_9 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_9 +#ifndef CONF_DMAC_DSTINC_9 +#define CONF_DMAC_DSTINC_9 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_9 +#ifndef CONF_DMAC_TRANS_TYPE_9 +#define CONF_DMAC_TRANS_TYPE_9 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_9 +#ifndef CONF_DMAC_TRIGSRC_9 +#define CONF_DMAC_TRIGSRC_9 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_9 == 0 +#define CONF_DMAC_TYPE_9 0 +#define CONF_DMAC_DSYNC_9 0 +#elif CONF_DMAC_TRANS_TYPE_9 == 1 +#define CONF_DMAC_TYPE_9 1 +#define CONF_DMAC_DSYNC_9 0 +#elif CONF_DMAC_TRANS_TYPE_9 == 2 +#define CONF_DMAC_TYPE_9 1 +#define CONF_DMAC_DSYNC_9 1 +#endif + +#if CONF_DMAC_TRIGSRC_9 == 0xFF +#define CONF_DMAC_SWREQ_9 1 +#else +#define CONF_DMAC_SWREQ_9 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_9_SETTINGS == 1 && CONF_DMAC_BEATSIZE_9 != 2 && ((!CONF_DMAC_SRCINC_9) || (!CONF_DMAC_DSTINC_9))) +#if (!CONF_DMAC_SRCINC_9) +#define CONF_DMAC_SRC_STRIDE_9 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_9) +#define CONF_DMAC_DES_STRIDE_9 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_9 +#define CONF_DMAC_SRC_STRIDE_9 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_9 +#define CONF_DMAC_DES_STRIDE_9 0 +#endif + +// <e> Channel 10 settings +// <id> dmac_channel_10_settings +#ifndef CONF_DMAC_CHANNEL_10_SETTINGS +#define CONF_DMAC_CHANNEL_10_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_10 +#ifndef CONF_DMAC_BURSTSIZE_10 +#define CONF_DMAC_BURSTSIZE_10 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_10 +#ifndef CONF_DMAC_CHUNKSIZE_10 +#define CONF_DMAC_CHUNKSIZE_10 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_10 +#ifndef CONF_DMAC_BEATSIZE_10 +#define CONF_DMAC_BEATSIZE_10 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_10 +#ifndef CONF_DMAC_SRC_INTERFACE_10 +#define CONF_DMAC_SRC_INTERFACE_10 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_10 +#ifndef CONF_DMAC_DES_INTERFACE_10 +#define CONF_DMAC_DES_INTERFACE_10 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_10 +#ifndef CONF_DMAC_SRCINC_10 +#define CONF_DMAC_SRCINC_10 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_10 +#ifndef CONF_DMAC_DSTINC_10 +#define CONF_DMAC_DSTINC_10 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_10 +#ifndef CONF_DMAC_TRANS_TYPE_10 +#define CONF_DMAC_TRANS_TYPE_10 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_10 +#ifndef CONF_DMAC_TRIGSRC_10 +#define CONF_DMAC_TRIGSRC_10 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_10 == 0 +#define CONF_DMAC_TYPE_10 0 +#define CONF_DMAC_DSYNC_10 0 +#elif CONF_DMAC_TRANS_TYPE_10 == 1 +#define CONF_DMAC_TYPE_10 1 +#define CONF_DMAC_DSYNC_10 0 +#elif CONF_DMAC_TRANS_TYPE_10 == 2 +#define CONF_DMAC_TYPE_10 1 +#define CONF_DMAC_DSYNC_10 1 +#endif + +#if CONF_DMAC_TRIGSRC_10 == 0xFF +#define CONF_DMAC_SWREQ_10 1 +#else +#define CONF_DMAC_SWREQ_10 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_10_SETTINGS == 1 && CONF_DMAC_BEATSIZE_10 != 2 \ + && ((!CONF_DMAC_SRCINC_10) || (!CONF_DMAC_DSTINC_10))) +#if (!CONF_DMAC_SRCINC_10) +#define CONF_DMAC_SRC_STRIDE_10 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_10) +#define CONF_DMAC_DES_STRIDE_10 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_10 +#define CONF_DMAC_SRC_STRIDE_10 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_10 +#define CONF_DMAC_DES_STRIDE_10 0 +#endif + +// <e> Channel 11 settings +// <id> dmac_channel_11_settings +#ifndef CONF_DMAC_CHANNEL_11_SETTINGS +#define CONF_DMAC_CHANNEL_11_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_11 +#ifndef CONF_DMAC_BURSTSIZE_11 +#define CONF_DMAC_BURSTSIZE_11 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_11 +#ifndef CONF_DMAC_CHUNKSIZE_11 +#define CONF_DMAC_CHUNKSIZE_11 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_11 +#ifndef CONF_DMAC_BEATSIZE_11 +#define CONF_DMAC_BEATSIZE_11 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_11 +#ifndef CONF_DMAC_SRC_INTERFACE_11 +#define CONF_DMAC_SRC_INTERFACE_11 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_11 +#ifndef CONF_DMAC_DES_INTERFACE_11 +#define CONF_DMAC_DES_INTERFACE_11 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_11 +#ifndef CONF_DMAC_SRCINC_11 +#define CONF_DMAC_SRCINC_11 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_11 +#ifndef CONF_DMAC_DSTINC_11 +#define CONF_DMAC_DSTINC_11 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_11 +#ifndef CONF_DMAC_TRANS_TYPE_11 +#define CONF_DMAC_TRANS_TYPE_11 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_11 +#ifndef CONF_DMAC_TRIGSRC_11 +#define CONF_DMAC_TRIGSRC_11 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_11 == 0 +#define CONF_DMAC_TYPE_11 0 +#define CONF_DMAC_DSYNC_11 0 +#elif CONF_DMAC_TRANS_TYPE_11 == 1 +#define CONF_DMAC_TYPE_11 1 +#define CONF_DMAC_DSYNC_11 0 +#elif CONF_DMAC_TRANS_TYPE_11 == 2 +#define CONF_DMAC_TYPE_11 1 +#define CONF_DMAC_DSYNC_11 1 +#endif + +#if CONF_DMAC_TRIGSRC_11 == 0xFF +#define CONF_DMAC_SWREQ_11 1 +#else +#define CONF_DMAC_SWREQ_11 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_11_SETTINGS == 1 && CONF_DMAC_BEATSIZE_11 != 2 \ + && ((!CONF_DMAC_SRCINC_11) || (!CONF_DMAC_DSTINC_11))) +#if (!CONF_DMAC_SRCINC_11) +#define CONF_DMAC_SRC_STRIDE_11 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_11) +#define CONF_DMAC_DES_STRIDE_11 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_11 +#define CONF_DMAC_SRC_STRIDE_11 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_11 +#define CONF_DMAC_DES_STRIDE_11 0 +#endif + +// <e> Channel 12 settings +// <id> dmac_channel_12_settings +#ifndef CONF_DMAC_CHANNEL_12_SETTINGS +#define CONF_DMAC_CHANNEL_12_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_12 +#ifndef CONF_DMAC_BURSTSIZE_12 +#define CONF_DMAC_BURSTSIZE_12 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_12 +#ifndef CONF_DMAC_CHUNKSIZE_12 +#define CONF_DMAC_CHUNKSIZE_12 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_12 +#ifndef CONF_DMAC_BEATSIZE_12 +#define CONF_DMAC_BEATSIZE_12 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_12 +#ifndef CONF_DMAC_SRC_INTERFACE_12 +#define CONF_DMAC_SRC_INTERFACE_12 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_12 +#ifndef CONF_DMAC_DES_INTERFACE_12 +#define CONF_DMAC_DES_INTERFACE_12 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_12 +#ifndef CONF_DMAC_SRCINC_12 +#define CONF_DMAC_SRCINC_12 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_12 +#ifndef CONF_DMAC_DSTINC_12 +#define CONF_DMAC_DSTINC_12 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_12 +#ifndef CONF_DMAC_TRANS_TYPE_12 +#define CONF_DMAC_TRANS_TYPE_12 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_12 +#ifndef CONF_DMAC_TRIGSRC_12 +#define CONF_DMAC_TRIGSRC_12 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_12 == 0 +#define CONF_DMAC_TYPE_12 0 +#define CONF_DMAC_DSYNC_12 0 +#elif CONF_DMAC_TRANS_TYPE_12 == 1 +#define CONF_DMAC_TYPE_12 1 +#define CONF_DMAC_DSYNC_12 0 +#elif CONF_DMAC_TRANS_TYPE_12 == 2 +#define CONF_DMAC_TYPE_12 1 +#define CONF_DMAC_DSYNC_12 1 +#endif + +#if CONF_DMAC_TRIGSRC_12 == 0xFF +#define CONF_DMAC_SWREQ_12 1 +#else +#define CONF_DMAC_SWREQ_12 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_12_SETTINGS == 1 && CONF_DMAC_BEATSIZE_12 != 2 \ + && ((!CONF_DMAC_SRCINC_12) || (!CONF_DMAC_DSTINC_12))) +#if (!CONF_DMAC_SRCINC_12) +#define CONF_DMAC_SRC_STRIDE_12 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_12) +#define CONF_DMAC_DES_STRIDE_12 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_12 +#define CONF_DMAC_SRC_STRIDE_12 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_12 +#define CONF_DMAC_DES_STRIDE_12 0 +#endif + +// <e> Channel 13 settings +// <id> dmac_channel_13_settings +#ifndef CONF_DMAC_CHANNEL_13_SETTINGS +#define CONF_DMAC_CHANNEL_13_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_13 +#ifndef CONF_DMAC_BURSTSIZE_13 +#define CONF_DMAC_BURSTSIZE_13 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_13 +#ifndef CONF_DMAC_CHUNKSIZE_13 +#define CONF_DMAC_CHUNKSIZE_13 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_13 +#ifndef CONF_DMAC_BEATSIZE_13 +#define CONF_DMAC_BEATSIZE_13 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_13 +#ifndef CONF_DMAC_SRC_INTERFACE_13 +#define CONF_DMAC_SRC_INTERFACE_13 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_13 +#ifndef CONF_DMAC_DES_INTERFACE_13 +#define CONF_DMAC_DES_INTERFACE_13 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_13 +#ifndef CONF_DMAC_SRCINC_13 +#define CONF_DMAC_SRCINC_13 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_13 +#ifndef CONF_DMAC_DSTINC_13 +#define CONF_DMAC_DSTINC_13 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_13 +#ifndef CONF_DMAC_TRANS_TYPE_13 +#define CONF_DMAC_TRANS_TYPE_13 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_13 +#ifndef CONF_DMAC_TRIGSRC_13 +#define CONF_DMAC_TRIGSRC_13 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_13 == 0 +#define CONF_DMAC_TYPE_13 0 +#define CONF_DMAC_DSYNC_13 0 +#elif CONF_DMAC_TRANS_TYPE_13 == 1 +#define CONF_DMAC_TYPE_13 1 +#define CONF_DMAC_DSYNC_13 0 +#elif CONF_DMAC_TRANS_TYPE_13 == 2 +#define CONF_DMAC_TYPE_13 1 +#define CONF_DMAC_DSYNC_13 1 +#endif + +#if CONF_DMAC_TRIGSRC_13 == 0xFF +#define CONF_DMAC_SWREQ_13 1 +#else +#define CONF_DMAC_SWREQ_13 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_13_SETTINGS == 1 && CONF_DMAC_BEATSIZE_13 != 2 \ + && ((!CONF_DMAC_SRCINC_13) || (!CONF_DMAC_DSTINC_13))) +#if (!CONF_DMAC_SRCINC_13) +#define CONF_DMAC_SRC_STRIDE_13 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_13) +#define CONF_DMAC_DES_STRIDE_13 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_13 +#define CONF_DMAC_SRC_STRIDE_13 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_13 +#define CONF_DMAC_DES_STRIDE_13 0 +#endif + +// <e> Channel 14 settings +// <id> dmac_channel_14_settings +#ifndef CONF_DMAC_CHANNEL_14_SETTINGS +#define CONF_DMAC_CHANNEL_14_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_14 +#ifndef CONF_DMAC_BURSTSIZE_14 +#define CONF_DMAC_BURSTSIZE_14 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_14 +#ifndef CONF_DMAC_CHUNKSIZE_14 +#define CONF_DMAC_CHUNKSIZE_14 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_14 +#ifndef CONF_DMAC_BEATSIZE_14 +#define CONF_DMAC_BEATSIZE_14 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_14 +#ifndef CONF_DMAC_SRC_INTERFACE_14 +#define CONF_DMAC_SRC_INTERFACE_14 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_14 +#ifndef CONF_DMAC_DES_INTERFACE_14 +#define CONF_DMAC_DES_INTERFACE_14 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_14 +#ifndef CONF_DMAC_SRCINC_14 +#define CONF_DMAC_SRCINC_14 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_14 +#ifndef CONF_DMAC_DSTINC_14 +#define CONF_DMAC_DSTINC_14 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_14 +#ifndef CONF_DMAC_TRANS_TYPE_14 +#define CONF_DMAC_TRANS_TYPE_14 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_14 +#ifndef CONF_DMAC_TRIGSRC_14 +#define CONF_DMAC_TRIGSRC_14 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_14 == 0 +#define CONF_DMAC_TYPE_14 0 +#define CONF_DMAC_DSYNC_14 0 +#elif CONF_DMAC_TRANS_TYPE_14 == 1 +#define CONF_DMAC_TYPE_14 1 +#define CONF_DMAC_DSYNC_14 0 +#elif CONF_DMAC_TRANS_TYPE_14 == 2 +#define CONF_DMAC_TYPE_14 1 +#define CONF_DMAC_DSYNC_14 1 +#endif + +#if CONF_DMAC_TRIGSRC_14 == 0xFF +#define CONF_DMAC_SWREQ_14 1 +#else +#define CONF_DMAC_SWREQ_14 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_14_SETTINGS == 1 && CONF_DMAC_BEATSIZE_14 != 2 \ + && ((!CONF_DMAC_SRCINC_14) || (!CONF_DMAC_DSTINC_14))) +#if (!CONF_DMAC_SRCINC_14) +#define CONF_DMAC_SRC_STRIDE_14 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_14) +#define CONF_DMAC_DES_STRIDE_14 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_14 +#define CONF_DMAC_SRC_STRIDE_14 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_14 +#define CONF_DMAC_DES_STRIDE_14 0 +#endif + +// <e> Channel 15 settings +// <id> dmac_channel_15_settings +#ifndef CONF_DMAC_CHANNEL_15_SETTINGS +#define CONF_DMAC_CHANNEL_15_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_15 +#ifndef CONF_DMAC_BURSTSIZE_15 +#define CONF_DMAC_BURSTSIZE_15 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_15 +#ifndef CONF_DMAC_CHUNKSIZE_15 +#define CONF_DMAC_CHUNKSIZE_15 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_15 +#ifndef CONF_DMAC_BEATSIZE_15 +#define CONF_DMAC_BEATSIZE_15 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_15 +#ifndef CONF_DMAC_SRC_INTERFACE_15 +#define CONF_DMAC_SRC_INTERFACE_15 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_15 +#ifndef CONF_DMAC_DES_INTERFACE_15 +#define CONF_DMAC_DES_INTERFACE_15 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_15 +#ifndef CONF_DMAC_SRCINC_15 +#define CONF_DMAC_SRCINC_15 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_15 +#ifndef CONF_DMAC_DSTINC_15 +#define CONF_DMAC_DSTINC_15 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_15 +#ifndef CONF_DMAC_TRANS_TYPE_15 +#define CONF_DMAC_TRANS_TYPE_15 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_15 +#ifndef CONF_DMAC_TRIGSRC_15 +#define CONF_DMAC_TRIGSRC_15 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_15 == 0 +#define CONF_DMAC_TYPE_15 0 +#define CONF_DMAC_DSYNC_15 0 +#elif CONF_DMAC_TRANS_TYPE_15 == 1 +#define CONF_DMAC_TYPE_15 1 +#define CONF_DMAC_DSYNC_15 0 +#elif CONF_DMAC_TRANS_TYPE_15 == 2 +#define CONF_DMAC_TYPE_15 1 +#define CONF_DMAC_DSYNC_15 1 +#endif + +#if CONF_DMAC_TRIGSRC_15 == 0xFF +#define CONF_DMAC_SWREQ_15 1 +#else +#define CONF_DMAC_SWREQ_15 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_15_SETTINGS == 1 && CONF_DMAC_BEATSIZE_15 != 2 \ + && ((!CONF_DMAC_SRCINC_15) || (!CONF_DMAC_DSTINC_15))) +#if (!CONF_DMAC_SRCINC_15) +#define CONF_DMAC_SRC_STRIDE_15 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_15) +#define CONF_DMAC_DES_STRIDE_15 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_15 +#define CONF_DMAC_SRC_STRIDE_15 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_15 +#define CONF_DMAC_DES_STRIDE_15 0 +#endif + +// <e> Channel 16 settings +// <id> dmac_channel_16_settings +#ifndef CONF_DMAC_CHANNEL_16_SETTINGS +#define CONF_DMAC_CHANNEL_16_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_16 +#ifndef CONF_DMAC_BURSTSIZE_16 +#define CONF_DMAC_BURSTSIZE_16 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_16 +#ifndef CONF_DMAC_CHUNKSIZE_16 +#define CONF_DMAC_CHUNKSIZE_16 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_16 +#ifndef CONF_DMAC_BEATSIZE_16 +#define CONF_DMAC_BEATSIZE_16 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_16 +#ifndef CONF_DMAC_SRC_INTERFACE_16 +#define CONF_DMAC_SRC_INTERFACE_16 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_16 +#ifndef CONF_DMAC_DES_INTERFACE_16 +#define CONF_DMAC_DES_INTERFACE_16 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_16 +#ifndef CONF_DMAC_SRCINC_16 +#define CONF_DMAC_SRCINC_16 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_16 +#ifndef CONF_DMAC_DSTINC_16 +#define CONF_DMAC_DSTINC_16 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_16 +#ifndef CONF_DMAC_TRANS_TYPE_16 +#define CONF_DMAC_TRANS_TYPE_16 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_16 +#ifndef CONF_DMAC_TRIGSRC_16 +#define CONF_DMAC_TRIGSRC_16 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_16 == 0 +#define CONF_DMAC_TYPE_16 0 +#define CONF_DMAC_DSYNC_16 0 +#elif CONF_DMAC_TRANS_TYPE_16 == 1 +#define CONF_DMAC_TYPE_16 1 +#define CONF_DMAC_DSYNC_16 0 +#elif CONF_DMAC_TRANS_TYPE_16 == 2 +#define CONF_DMAC_TYPE_16 1 +#define CONF_DMAC_DSYNC_16 1 +#endif + +#if CONF_DMAC_TRIGSRC_16 == 0xFF +#define CONF_DMAC_SWREQ_16 1 +#else +#define CONF_DMAC_SWREQ_16 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_16_SETTINGS == 1 && CONF_DMAC_BEATSIZE_16 != 2 \ + && ((!CONF_DMAC_SRCINC_16) || (!CONF_DMAC_DSTINC_16))) +#if (!CONF_DMAC_SRCINC_16) +#define CONF_DMAC_SRC_STRIDE_16 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_16) +#define CONF_DMAC_DES_STRIDE_16 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_16 +#define CONF_DMAC_SRC_STRIDE_16 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_16 +#define CONF_DMAC_DES_STRIDE_16 0 +#endif + +// <e> Channel 17 settings +// <id> dmac_channel_17_settings +#ifndef CONF_DMAC_CHANNEL_17_SETTINGS +#define CONF_DMAC_CHANNEL_17_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_17 +#ifndef CONF_DMAC_BURSTSIZE_17 +#define CONF_DMAC_BURSTSIZE_17 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_17 +#ifndef CONF_DMAC_CHUNKSIZE_17 +#define CONF_DMAC_CHUNKSIZE_17 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_17 +#ifndef CONF_DMAC_BEATSIZE_17 +#define CONF_DMAC_BEATSIZE_17 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_17 +#ifndef CONF_DMAC_SRC_INTERFACE_17 +#define CONF_DMAC_SRC_INTERFACE_17 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_17 +#ifndef CONF_DMAC_DES_INTERFACE_17 +#define CONF_DMAC_DES_INTERFACE_17 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_17 +#ifndef CONF_DMAC_SRCINC_17 +#define CONF_DMAC_SRCINC_17 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_17 +#ifndef CONF_DMAC_DSTINC_17 +#define CONF_DMAC_DSTINC_17 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_17 +#ifndef CONF_DMAC_TRANS_TYPE_17 +#define CONF_DMAC_TRANS_TYPE_17 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_17 +#ifndef CONF_DMAC_TRIGSRC_17 +#define CONF_DMAC_TRIGSRC_17 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_17 == 0 +#define CONF_DMAC_TYPE_17 0 +#define CONF_DMAC_DSYNC_17 0 +#elif CONF_DMAC_TRANS_TYPE_17 == 1 +#define CONF_DMAC_TYPE_17 1 +#define CONF_DMAC_DSYNC_17 0 +#elif CONF_DMAC_TRANS_TYPE_17 == 2 +#define CONF_DMAC_TYPE_17 1 +#define CONF_DMAC_DSYNC_17 1 +#endif + +#if CONF_DMAC_TRIGSRC_17 == 0xFF +#define CONF_DMAC_SWREQ_17 1 +#else +#define CONF_DMAC_SWREQ_17 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_17_SETTINGS == 1 && CONF_DMAC_BEATSIZE_17 != 2 \ + && ((!CONF_DMAC_SRCINC_17) || (!CONF_DMAC_DSTINC_17))) +#if (!CONF_DMAC_SRCINC_17) +#define CONF_DMAC_SRC_STRIDE_17 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_17) +#define CONF_DMAC_DES_STRIDE_17 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_17 +#define CONF_DMAC_SRC_STRIDE_17 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_17 +#define CONF_DMAC_DES_STRIDE_17 0 +#endif + +// <e> Channel 18 settings +// <id> dmac_channel_18_settings +#ifndef CONF_DMAC_CHANNEL_18_SETTINGS +#define CONF_DMAC_CHANNEL_18_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_18 +#ifndef CONF_DMAC_BURSTSIZE_18 +#define CONF_DMAC_BURSTSIZE_18 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_18 +#ifndef CONF_DMAC_CHUNKSIZE_18 +#define CONF_DMAC_CHUNKSIZE_18 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_18 +#ifndef CONF_DMAC_BEATSIZE_18 +#define CONF_DMAC_BEATSIZE_18 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_18 +#ifndef CONF_DMAC_SRC_INTERFACE_18 +#define CONF_DMAC_SRC_INTERFACE_18 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_18 +#ifndef CONF_DMAC_DES_INTERFACE_18 +#define CONF_DMAC_DES_INTERFACE_18 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_18 +#ifndef CONF_DMAC_SRCINC_18 +#define CONF_DMAC_SRCINC_18 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_18 +#ifndef CONF_DMAC_DSTINC_18 +#define CONF_DMAC_DSTINC_18 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_18 +#ifndef CONF_DMAC_TRANS_TYPE_18 +#define CONF_DMAC_TRANS_TYPE_18 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_18 +#ifndef CONF_DMAC_TRIGSRC_18 +#define CONF_DMAC_TRIGSRC_18 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_18 == 0 +#define CONF_DMAC_TYPE_18 0 +#define CONF_DMAC_DSYNC_18 0 +#elif CONF_DMAC_TRANS_TYPE_18 == 1 +#define CONF_DMAC_TYPE_18 1 +#define CONF_DMAC_DSYNC_18 0 +#elif CONF_DMAC_TRANS_TYPE_18 == 2 +#define CONF_DMAC_TYPE_18 1 +#define CONF_DMAC_DSYNC_18 1 +#endif + +#if CONF_DMAC_TRIGSRC_18 == 0xFF +#define CONF_DMAC_SWREQ_18 1 +#else +#define CONF_DMAC_SWREQ_18 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_18_SETTINGS == 1 && CONF_DMAC_BEATSIZE_18 != 2 \ + && ((!CONF_DMAC_SRCINC_18) || (!CONF_DMAC_DSTINC_18))) +#if (!CONF_DMAC_SRCINC_18) +#define CONF_DMAC_SRC_STRIDE_18 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_18) +#define CONF_DMAC_DES_STRIDE_18 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_18 +#define CONF_DMAC_SRC_STRIDE_18 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_18 +#define CONF_DMAC_DES_STRIDE_18 0 +#endif + +// <e> Channel 19 settings +// <id> dmac_channel_19_settings +#ifndef CONF_DMAC_CHANNEL_19_SETTINGS +#define CONF_DMAC_CHANNEL_19_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_19 +#ifndef CONF_DMAC_BURSTSIZE_19 +#define CONF_DMAC_BURSTSIZE_19 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_19 +#ifndef CONF_DMAC_CHUNKSIZE_19 +#define CONF_DMAC_CHUNKSIZE_19 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_19 +#ifndef CONF_DMAC_BEATSIZE_19 +#define CONF_DMAC_BEATSIZE_19 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_19 +#ifndef CONF_DMAC_SRC_INTERFACE_19 +#define CONF_DMAC_SRC_INTERFACE_19 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_19 +#ifndef CONF_DMAC_DES_INTERFACE_19 +#define CONF_DMAC_DES_INTERFACE_19 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_19 +#ifndef CONF_DMAC_SRCINC_19 +#define CONF_DMAC_SRCINC_19 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_19 +#ifndef CONF_DMAC_DSTINC_19 +#define CONF_DMAC_DSTINC_19 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_19 +#ifndef CONF_DMAC_TRANS_TYPE_19 +#define CONF_DMAC_TRANS_TYPE_19 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_19 +#ifndef CONF_DMAC_TRIGSRC_19 +#define CONF_DMAC_TRIGSRC_19 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_19 == 0 +#define CONF_DMAC_TYPE_19 0 +#define CONF_DMAC_DSYNC_19 0 +#elif CONF_DMAC_TRANS_TYPE_19 == 1 +#define CONF_DMAC_TYPE_19 1 +#define CONF_DMAC_DSYNC_19 0 +#elif CONF_DMAC_TRANS_TYPE_19 == 2 +#define CONF_DMAC_TYPE_19 1 +#define CONF_DMAC_DSYNC_19 1 +#endif + +#if CONF_DMAC_TRIGSRC_19 == 0xFF +#define CONF_DMAC_SWREQ_19 1 +#else +#define CONF_DMAC_SWREQ_19 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_19_SETTINGS == 1 && CONF_DMAC_BEATSIZE_19 != 2 \ + && ((!CONF_DMAC_SRCINC_19) || (!CONF_DMAC_DSTINC_19))) +#if (!CONF_DMAC_SRCINC_19) +#define CONF_DMAC_SRC_STRIDE_19 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_19) +#define CONF_DMAC_DES_STRIDE_19 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_19 +#define CONF_DMAC_SRC_STRIDE_19 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_19 +#define CONF_DMAC_DES_STRIDE_19 0 +#endif + +// <e> Channel 20 settings +// <id> dmac_channel_20_settings +#ifndef CONF_DMAC_CHANNEL_20_SETTINGS +#define CONF_DMAC_CHANNEL_20_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_20 +#ifndef CONF_DMAC_BURSTSIZE_20 +#define CONF_DMAC_BURSTSIZE_20 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_20 +#ifndef CONF_DMAC_CHUNKSIZE_20 +#define CONF_DMAC_CHUNKSIZE_20 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_20 +#ifndef CONF_DMAC_BEATSIZE_20 +#define CONF_DMAC_BEATSIZE_20 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_20 +#ifndef CONF_DMAC_SRC_INTERFACE_20 +#define CONF_DMAC_SRC_INTERFACE_20 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_20 +#ifndef CONF_DMAC_DES_INTERFACE_20 +#define CONF_DMAC_DES_INTERFACE_20 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_20 +#ifndef CONF_DMAC_SRCINC_20 +#define CONF_DMAC_SRCINC_20 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_20 +#ifndef CONF_DMAC_DSTINC_20 +#define CONF_DMAC_DSTINC_20 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_20 +#ifndef CONF_DMAC_TRANS_TYPE_20 +#define CONF_DMAC_TRANS_TYPE_20 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_20 +#ifndef CONF_DMAC_TRIGSRC_20 +#define CONF_DMAC_TRIGSRC_20 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_20 == 0 +#define CONF_DMAC_TYPE_20 0 +#define CONF_DMAC_DSYNC_20 0 +#elif CONF_DMAC_TRANS_TYPE_20 == 1 +#define CONF_DMAC_TYPE_20 1 +#define CONF_DMAC_DSYNC_20 0 +#elif CONF_DMAC_TRANS_TYPE_20 == 2 +#define CONF_DMAC_TYPE_20 1 +#define CONF_DMAC_DSYNC_20 1 +#endif + +#if CONF_DMAC_TRIGSRC_20 == 0xFF +#define CONF_DMAC_SWREQ_20 1 +#else +#define CONF_DMAC_SWREQ_20 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_20_SETTINGS == 1 && CONF_DMAC_BEATSIZE_20 != 2 \ + && ((!CONF_DMAC_SRCINC_20) || (!CONF_DMAC_DSTINC_20))) +#if (!CONF_DMAC_SRCINC_20) +#define CONF_DMAC_SRC_STRIDE_20 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_20) +#define CONF_DMAC_DES_STRIDE_20 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_20 +#define CONF_DMAC_SRC_STRIDE_20 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_20 +#define CONF_DMAC_DES_STRIDE_20 0 +#endif + +// <e> Channel 21 settings +// <id> dmac_channel_21_settings +#ifndef CONF_DMAC_CHANNEL_21_SETTINGS +#define CONF_DMAC_CHANNEL_21_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_21 +#ifndef CONF_DMAC_BURSTSIZE_21 +#define CONF_DMAC_BURSTSIZE_21 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_21 +#ifndef CONF_DMAC_CHUNKSIZE_21 +#define CONF_DMAC_CHUNKSIZE_21 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_21 +#ifndef CONF_DMAC_BEATSIZE_21 +#define CONF_DMAC_BEATSIZE_21 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_21 +#ifndef CONF_DMAC_SRC_INTERFACE_21 +#define CONF_DMAC_SRC_INTERFACE_21 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_21 +#ifndef CONF_DMAC_DES_INTERFACE_21 +#define CONF_DMAC_DES_INTERFACE_21 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_21 +#ifndef CONF_DMAC_SRCINC_21 +#define CONF_DMAC_SRCINC_21 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_21 +#ifndef CONF_DMAC_DSTINC_21 +#define CONF_DMAC_DSTINC_21 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_21 +#ifndef CONF_DMAC_TRANS_TYPE_21 +#define CONF_DMAC_TRANS_TYPE_21 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_21 +#ifndef CONF_DMAC_TRIGSRC_21 +#define CONF_DMAC_TRIGSRC_21 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_21 == 0 +#define CONF_DMAC_TYPE_21 0 +#define CONF_DMAC_DSYNC_21 0 +#elif CONF_DMAC_TRANS_TYPE_21 == 1 +#define CONF_DMAC_TYPE_21 1 +#define CONF_DMAC_DSYNC_21 0 +#elif CONF_DMAC_TRANS_TYPE_21 == 2 +#define CONF_DMAC_TYPE_21 1 +#define CONF_DMAC_DSYNC_21 1 +#endif + +#if CONF_DMAC_TRIGSRC_21 == 0xFF +#define CONF_DMAC_SWREQ_21 1 +#else +#define CONF_DMAC_SWREQ_21 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_21_SETTINGS == 1 && CONF_DMAC_BEATSIZE_21 != 2 \ + && ((!CONF_DMAC_SRCINC_21) || (!CONF_DMAC_DSTINC_21))) +#if (!CONF_DMAC_SRCINC_21) +#define CONF_DMAC_SRC_STRIDE_21 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_21) +#define CONF_DMAC_DES_STRIDE_21 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_21 +#define CONF_DMAC_SRC_STRIDE_21 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_21 +#define CONF_DMAC_DES_STRIDE_21 0 +#endif + +// <e> Channel 22 settings +// <id> dmac_channel_22_settings +#ifndef CONF_DMAC_CHANNEL_22_SETTINGS +#define CONF_DMAC_CHANNEL_22_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_22 +#ifndef CONF_DMAC_BURSTSIZE_22 +#define CONF_DMAC_BURSTSIZE_22 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_22 +#ifndef CONF_DMAC_CHUNKSIZE_22 +#define CONF_DMAC_CHUNKSIZE_22 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_22 +#ifndef CONF_DMAC_BEATSIZE_22 +#define CONF_DMAC_BEATSIZE_22 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_22 +#ifndef CONF_DMAC_SRC_INTERFACE_22 +#define CONF_DMAC_SRC_INTERFACE_22 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_22 +#ifndef CONF_DMAC_DES_INTERFACE_22 +#define CONF_DMAC_DES_INTERFACE_22 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_22 +#ifndef CONF_DMAC_SRCINC_22 +#define CONF_DMAC_SRCINC_22 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_22 +#ifndef CONF_DMAC_DSTINC_22 +#define CONF_DMAC_DSTINC_22 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_22 +#ifndef CONF_DMAC_TRANS_TYPE_22 +#define CONF_DMAC_TRANS_TYPE_22 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_22 +#ifndef CONF_DMAC_TRIGSRC_22 +#define CONF_DMAC_TRIGSRC_22 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_22 == 0 +#define CONF_DMAC_TYPE_22 0 +#define CONF_DMAC_DSYNC_22 0 +#elif CONF_DMAC_TRANS_TYPE_22 == 1 +#define CONF_DMAC_TYPE_22 1 +#define CONF_DMAC_DSYNC_22 0 +#elif CONF_DMAC_TRANS_TYPE_22 == 2 +#define CONF_DMAC_TYPE_22 1 +#define CONF_DMAC_DSYNC_22 1 +#endif + +#if CONF_DMAC_TRIGSRC_22 == 0xFF +#define CONF_DMAC_SWREQ_22 1 +#else +#define CONF_DMAC_SWREQ_22 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_22_SETTINGS == 1 && CONF_DMAC_BEATSIZE_22 != 2 \ + && ((!CONF_DMAC_SRCINC_22) || (!CONF_DMAC_DSTINC_22))) +#if (!CONF_DMAC_SRCINC_22) +#define CONF_DMAC_SRC_STRIDE_22 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_22) +#define CONF_DMAC_DES_STRIDE_22 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_22 +#define CONF_DMAC_SRC_STRIDE_22 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_22 +#define CONF_DMAC_DES_STRIDE_22 0 +#endif + +// <e> Channel 23 settings +// <id> dmac_channel_23_settings +#ifndef CONF_DMAC_CHANNEL_23_SETTINGS +#define CONF_DMAC_CHANNEL_23_SETTINGS 0 +#endif + +// <o> Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// <i> Define the memory burst size +// <id> dmac_burstsize_23 +#ifndef CONF_DMAC_BURSTSIZE_23 +#define CONF_DMAC_BURSTSIZE_23 0x0 +#endif + +// <o> Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// <i> Define the peripheral chunk size +// <id> dmac_chunksize_23 +#ifndef CONF_DMAC_CHUNKSIZE_23 +#define CONF_DMAC_CHUNKSIZE_23 0x0 +#endif + +// <o> Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// <i> Defines the size of one beat +// <id> dmac_beatsize_23 +#ifndef CONF_DMAC_BEATSIZE_23 +#define CONF_DMAC_BEATSIZE_23 0x0 +#endif + +// <o> Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is read through the system bus interface 0 or 1 +// <id> dma_src_interface_23 +#ifndef CONF_DMAC_SRC_INTERFACE_23 +#define CONF_DMAC_SRC_INTERFACE_23 0x0 +#endif + +// <o> Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// <i> Define the data is written through the system bus interface 0 or 1 +// <id> dma_des_interface_23 +#ifndef CONF_DMAC_DES_INTERFACE_23 +#define CONF_DMAC_DES_INTERFACE_23 0x0 +#endif + +// <q> Source Address Increment +// <i> Indicates whether the source address incremented as beat size or not +// <id> dmac_srcinc_23 +#ifndef CONF_DMAC_SRCINC_23 +#define CONF_DMAC_SRCINC_23 0 +#endif + +// <q> Destination Address Increment +// <i> Indicates whether the destination address incremented as beat size or not +// <id> dmac_dstinc_23 +#ifndef CONF_DMAC_DSTINC_23 +#define CONF_DMAC_DSTINC_23 0 +#endif + +// <o> Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// <i> Define the data transfer type +// <id> dma_trans_type_23 +#ifndef CONF_DMAC_TRANS_TYPE_23 +#define CONF_DMAC_TRANS_TYPE_23 0x0 +#endif + +// <o> Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// <i> Define the DMA trigger source +// <id> dmac_trifsrc_23 +#ifndef CONF_DMAC_TRIGSRC_23 +#define CONF_DMAC_TRIGSRC_23 0xff +#endif + +// </e> + +#if CONF_DMAC_TRANS_TYPE_23 == 0 +#define CONF_DMAC_TYPE_23 0 +#define CONF_DMAC_DSYNC_23 0 +#elif CONF_DMAC_TRANS_TYPE_23 == 1 +#define CONF_DMAC_TYPE_23 1 +#define CONF_DMAC_DSYNC_23 0 +#elif CONF_DMAC_TRANS_TYPE_23 == 2 +#define CONF_DMAC_TYPE_23 1 +#define CONF_DMAC_DSYNC_23 1 +#endif + +#if CONF_DMAC_TRIGSRC_23 == 0xFF +#define CONF_DMAC_SWREQ_23 1 +#else +#define CONF_DMAC_SWREQ_23 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_23_SETTINGS == 1 && CONF_DMAC_BEATSIZE_23 != 2 \ + && ((!CONF_DMAC_SRCINC_23) || (!CONF_DMAC_DSTINC_23))) +#if (!CONF_DMAC_SRCINC_23) +#define CONF_DMAC_SRC_STRIDE_23 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_23) +#define CONF_DMAC_DES_STRIDE_23 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_23 +#define CONF_DMAC_SRC_STRIDE_23 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_23 +#define CONF_DMAC_DES_STRIDE_23 0 +#endif + +// </e> + +// <<< end of configuration section >>> + +#endif // HPL_XDMAC_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/peripheral_clk_config.h b/tinyusb/hw/bsp/same70_xplained/peripheral_clk_config.h new file mode 100755 index 00000000..84756f5a --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/peripheral_clk_config.h @@ -0,0 +1,126 @@ +/* Auto-generated config file peripheral_clk_config.h */ +#ifndef PERIPHERAL_CLK_CONFIG_H +#define PERIPHERAL_CLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +/** + * \def CONF_HCLK_FREQUENCY + * \brief HCLK's Clock frequency + */ +#ifndef CONF_HCLK_FREQUENCY +#define CONF_HCLK_FREQUENCY 300000000 +#endif + +/** + * \def CONF_FCLK_FREQUENCY + * \brief FCLK's Clock frequency + */ +#ifndef CONF_FCLK_FREQUENCY +#define CONF_FCLK_FREQUENCY 300000000 +#endif + +/** + * \def CONF_CPU_FREQUENCY + * \brief CPU's Clock frequency + */ +#ifndef CONF_CPU_FREQUENCY +#define CONF_CPU_FREQUENCY 300000000 +#endif + +/** + * \def CONF_SLCK_FREQUENCY + * \brief Slow Clock frequency + */ +#define CONF_SLCK_FREQUENCY 0 + +/** + * \def CONF_MCK_FREQUENCY + * \brief Master Clock frequency + */ +#define CONF_MCK_FREQUENCY 150000000 + +/** + * \def CONF_PCK6_FREQUENCY + * \brief Programmable Clock Controller 6 frequency + */ +#define CONF_PCK6_FREQUENCY 1714285 + +// <h> USART Clock Settings +// <o> USART Clock source + +// <0=> Master Clock (MCK) +// <1=> MCK / 8 for USART +// <2=> Programmable Clock Controller 4 (PMC_PCK4) +// <3=> External Clock +// <i> This defines the clock source for the USART +// <id> usart_clock_source +#ifndef CONF_USART1_CK_SRC +#define CONF_USART1_CK_SRC 0 +#endif + +// <o> USART External Clock Input on SCK <1-4294967295> +// <i> Inputs the external clock frequency on SCK +// <id> usart_clock_freq +#ifndef CONF_USART1_SCK_FREQ +#define CONF_USART1_SCK_FREQ 10000000 +#endif + +// </h> + +/** + * \def USART FREQUENCY + * \brief USART's Clock frequency + */ +#ifndef CONF_USART1_FREQUENCY +#define CONF_USART1_FREQUENCY 150000000 +#endif + +#ifndef CONF_SRC_USB_480M +#define CONF_SRC_USB_480M 0 +#endif + +#ifndef CONF_SRC_USB_48M +#define CONF_SRC_USB_48M 1 +#endif + +// <y> USB Full/Low Speed Clock +// <CONF_SRC_USB_48M"> USB Clock Controller (USB_48M) +// <id> usb_fsls_clock_source +// <i> 48MHz clock source for low speed and full speed. +// <i> It must be available when low speed is supported by host driver. +// <i> It must be available when low power mode is selected. +#ifndef CONF_USBHS_FSLS_SRC +#define CONF_USBHS_FSLS_SRC CONF_SRC_USB_48M +#endif + +// <y> USB Clock Source(Normal/Low-power Mode Selection) +// <CONF_SRC_USB_480M"> USB High Speed Clock (USB_480M) +// <CONF_SRC_USB_48M"> USB Clock Controller (USB_48M) +// <id> usb_clock_source +// <i> Select the clock source for USB. +// <i> In normal mode, use "USB High Speed Clock (USB_480M)". +// <i> In low-power mode, use "USB Clock Controller (USB_48M)". +#ifndef CONF_USBHS_SRC +#define CONF_USBHS_SRC CONF_SRC_USB_480M +#endif + +/** + * \def CONF_USBHS_FSLS_FREQUENCY + * \brief USBHS's Full/Low Speed Clock Source frequency + */ +#ifndef CONF_USBHS_FSLS_FREQUENCY +#define CONF_USBHS_FSLS_FREQUENCY 48000000 +#endif + +/** + * \def CONF_USBHS_FREQUENCY + * \brief USBHS's Selected Clock Source frequency + */ +#ifndef CONF_USBHS_FREQUENCY +#define CONF_USBHS_FREQUENCY 480000000 +#endif + +// <<< end of configuration section >>> + +#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/same70_xplained.c b/tinyusb/hw/bsp/same70_xplained/same70_xplained.c new file mode 100755 index 00000000..e6e7db0f --- /dev/null +++ b/tinyusb/hw/bsp/same70_xplained/same70_xplained.c @@ -0,0 +1,156 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "sam.h" +#include "bsp/board.h" + +#include "peripheral_clk_config.h" +#include "hpl/usart/hpl_usart_base.h" +#include "hpl/pmc/hpl_pmc.h" +#include "hal/include/hal_init.h" +#include "hal/include/hal_usart_async.h" +#include "hal/include/hal_gpio.h" + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#define LED_PIN GPIO(GPIO_PORTC, 8) + +#define BUTTON_PIN GPIO(GPIO_PORTA, 11) +#define BUTTON_STATE_ACTIVE 0 + +#define UART_TX_PIN GPIO(GPIO_PORTB, 4) +#define UART_RX_PIN GPIO(GPIO_PORTA, 21) + +static struct usart_async_descriptor edbg_com; +static uint8_t edbg_com_buffer[64]; +static volatile bool uart_busy = false; + +static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr) +{ + (void) io_descr; + uart_busy = false; +} + +//------------- IMPLEMENTATION -------------// +void board_init(void) +{ + init_mcu(); + + /* Disable Watchdog */ + hri_wdt_set_MR_WDDIS_bit(WDT); + + // LED + _pmc_enable_periph_clock(ID_PIOC); + gpio_set_pin_level(LED_PIN, false); + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); + + // Button + _pmc_enable_periph_clock(ID_PIOA); + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); + + // Uart via EDBG Com + _pmc_enable_periph_clock(ID_USART1); + gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1); + gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1); + + usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async()); + usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); + usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM); + usart_async_enable(&edbg_com); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer (samd SystemCoreClock may not correct) + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + // Enable USB clock + _pmc_enable_periph_clock(ID_USBHS); + +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USBHS_Handler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + // while until previous transfer is complete + while(uart_busy) {} + uart_busy = true; + + io_write(&edbg_com.io, buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/samg55xplained/board.mk b/tinyusb/hw/bsp/samg55xplained/board.mk new file mode 100755 index 00000000..aed4de68 --- /dev/null +++ b/tinyusb/hw/bsp/samg55xplained/board.mk @@ -0,0 +1,52 @@ +DEPS_SUBMODULES += hw/mcu/microchip + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__SAMG55J19__ \ + -DCFG_TUSB_MCU=OPT_MCU_SAMG + +# suppress following warnings from mcu driver +CFLAGS += -Wno-error=undef + +ASF_DIR = hw/mcu/microchip/samg55 + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/samg55j19_flash.ld + +SRC_C += \ + src/portable/microchip/samg/dcd_samg.c \ + $(ASF_DIR)/samg55/gcc/gcc/startup_samg55.c \ + $(ASF_DIR)/samg55/gcc/system_samg55.c \ + $(ASF_DIR)/hpl/core/hpl_init.c \ + $(ASF_DIR)/hpl/usart/hpl_usart.c \ + $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ + $(ASF_DIR)/hal/src/hal_atomic.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(ASF_DIR) \ + $(TOP)/$(ASF_DIR)/config \ + $(TOP)/$(ASF_DIR)/samg55/include \ + $(TOP)/$(ASF_DIR)/hal/include \ + $(TOP)/$(ASF_DIR)/hal/utils/include \ + $(TOP)/$(ASF_DIR)/hpl/core \ + $(TOP)/$(ASF_DIR)/hpl/pio \ + $(TOP)/$(ASF_DIR)/hpl/pmc \ + $(TOP)/$(ASF_DIR)/hri \ + $(TOP)/$(ASF_DIR)/CMSIS/Core/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = ATSAMG55J19 + +# flash using edbg from https://github.com/ataradov/edbg +flash: $(BUILD)/$(PROJECT).bin + edbg --verbose -t samg55 -pv -f $< diff --git a/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h b/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h new file mode 100755 index 00000000..4f2837d2 --- /dev/null +++ b/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h @@ -0,0 +1,215 @@ +/* Auto-generated config file hpl_usart_config.h */ +#ifndef HPL_USART_CONFIG_H +#define HPL_USART_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <peripheral_clk_config.h> + +#ifndef CONF_USART_7_ENABLE +#define CONF_USART_7_ENABLE 1 +#endif + +// <h> Basic Configuration + +// <o> Frame parity +// <0x0=>Even parity +// <0x1=>Odd parity +// <0x2=>Parity forced to 0 +// <0x3=>Parity forced to 1 +// <0x4=>No parity +// <i> Parity bit mode for USART frame +// <id> usart_parity +#ifndef CONF_USART_7_PARITY +#define CONF_USART_7_PARITY 0x4 +#endif + +// <o> Character Size +// <0x0=>5 bits +// <0x1=>6 bits +// <0x2=>7 bits +// <0x3=>8 bits +// <i> Data character size in USART frame +// <id> usart_character_size +#ifndef CONF_USART_7_CHSIZE +#define CONF_USART_7_CHSIZE 0x3 +#endif + +// <o> Stop Bit +// <0=>1 stop bit +// <1=>1.5 stop bits +// <2=>2 stop bits +// <i> Number of stop bits in USART frame +// <id> usart_stop_bit +#ifndef CONF_USART_7_SBMODE +#define CONF_USART_7_SBMODE 0 +#endif + +// <o> Clock Output Select +// <0=>The USART does not drive the SCK pin +// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK +// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK. +// <id> usart_clock_output_select +#ifndef CONF_USART_7_CLKO +#define CONF_USART_7_CLKO 0 +#endif + +// <o> Baud rate <1-3000000> +// <i> USART baud rate setting +// <id> usart_baud_rate +#ifndef CONF_USART_7_BAUD +#define CONF_USART_7_BAUD 9600 +#endif + +// </h> + +// <e> Advanced configuration +// <id> usart_advanced +#ifndef CONF_USART_7_ADVANCED_CONFIG +#define CONF_USART_7_ADVANCED_CONFIG 0 +#endif + +// <o> Channel Mode +// <0=>Normal Mode +// <1=>Automatic Echo +// <2=>Local Loopback +// <3=>Remote Loopback +// <i> Channel mode in USART frame +// <id> usart_channel_mode +#ifndef CONF_USART_7_CHMODE +#define CONF_USART_7_CHMODE 0 +#endif + +// <q> 9 bits character enable +// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits. +// <id> usart_9bits_enable +#ifndef CONF_USART_7_MODE9 +#define CONF_USART_7_MODE9 0 +#endif + +// <o> Variable Sync +// <0=>User defined configuration +// <1=>sync field is updated when a character is written into US_THR +// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter +// <id> variable_sync +#ifndef CONF_USART_7_VAR_SYNC +#define CONF_USART_7_VAR_SYNC 0 +#endif + +// <o> Oversampling Mode +// <0=>16 Oversampling +// <1=>8 Oversampling +// <i> Oversampling Mode in UART mode +// <id> usart__oversampling_mode +#ifndef CONF_USART_7_OVER +#define CONF_USART_7_OVER 0 +#endif + +// <o> Inhibit Non Ack +// <0=>The NACK is generated +// <1=>The NACK is not generated +// <i> Inhibit Non Acknowledge +// <id> usart__inack +#ifndef CONF_USART_7_INACK +#define CONF_USART_7_INACK 1 +#endif + +// <o> Disable Successive NACK +// <0=>NACK is sent on the ISO line as soon as a parity error occurs +// <1=>Many parity errors generate a NACK on the ISO line +// <i> Disable Successive NACK +// <id> usart_dsnack +#ifndef CONF_USART_7_DSNACK +#define CONF_USART_7_DSNACK 0 +#endif + +// <o> Inverted Data +// <0=>Data isn't inverted, nomal mode +// <1=>Data is inverted +// <i> Inverted Data +// <id> usart_invdata +#ifndef CONF_USART_7_INVDATA +#define CONF_USART_7_INVDATA 0 +#endif + +// <o> Maximum Number of Automatic Iteration <0-7> +// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0. +// <id> usart_max_iteration +#ifndef CONF_USART_7_MAX_ITERATION +#define CONF_USART_7_MAX_ITERATION 0 +#endif + +// <q> Receive Line Filter enable +// <i> whether the USART filters the receive line using a three-sample filter +// <id> usart_receive_filter_enable +#ifndef CONF_USART_7_FILTER +#define CONF_USART_7_FILTER 0 +#endif + +// <q> Manchester Encoder/Decoder Enable +// <i> whether the USART Manchester Encoder/Decoder +// <id> usart_manchester_filter_enable +#ifndef CONF_USART_7_MAN +#define CONF_USART_7_MAN 0 +#endif + +// <o> Manchester Synchronization Mode +// <0=>The Manchester start bit is a 0 to 1 transition +// <1=>The Manchester start bit is a 1 to 0 transition +// <i> Manchester Synchronization Mode +// <id> usart_manchester_synchronization_mode +#ifndef CONF_USART_7_MODSYNC +#define CONF_USART_7_MODSYNC 0 +#endif + +// <o> Start Frame Delimiter Selector +// <0=>Start frame delimiter is COMMAND or DATA SYNC +// <1=>Start frame delimiter is one bit +// <i> Start Frame Delimiter Selector +// <id> usart_start_frame_delimiter +#ifndef CONF_USART_7_ONEBIT +#define CONF_USART_7_ONEBIT 0 +#endif + +// <o> Fractional Part <0-7> +// <i> Fractional part of the baud rate if baud rate generator is in fractional mode +// <id> usart_arch_fractional +#ifndef CONF_USART_7_FRACTIONAL +#define CONF_USART_7_FRACTIONAL 0x0 +#endif + +// <o> Data Order +// <0=>LSB is transmitted first +// <1=>MSB is transmitted first +// <i> Data order of the data bits in the frame +// <id> usart_arch_msbf +#ifndef CONF_USART_7_MSBF +#define CONF_USART_7_MSBF 0 +#endif + +// </e> + +#define CONF_USART_7_MODE 0x0 + +// Calculate BAUD register value in UART mode +#if CONF_FLEXCOM7_CK_SRC < 3 +#ifndef CONF_USART_7_BAUD_CD +#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER)) +#endif +#ifndef CONF_USART_7_BAUD_FP +#define CONF_USART_7_BAUD_FP \ + ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD) +#endif +#elif CONF_FLEXCOM7_CK_SRC == 3 +// No division is active. The value written in US_BRGR has no effect. +#ifndef CONF_USART_7_BAUD_CD +#define CONF_USART_7_BAUD_CD 1 +#endif +#ifndef CONF_USART_7_BAUD_FP +#define CONF_USART_7_BAUD_FP 1 +#endif +#endif + +// <<< end of configuration section >>> + +#endif // HPL_USART_CONFIG_H diff --git a/tinyusb/hw/bsp/samg55xplained/peripheral_clk_config.h b/tinyusb/hw/bsp/samg55xplained/peripheral_clk_config.h new file mode 100755 index 00000000..6d390f38 --- /dev/null +++ b/tinyusb/hw/bsp/samg55xplained/peripheral_clk_config.h @@ -0,0 +1,85 @@ +/* Auto-generated config file peripheral_clk_config.h */ +#ifndef PERIPHERAL_CLK_CONFIG_H +#define PERIPHERAL_CLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +/** + * \def CONF_HCLK_FREQUENCY + * \brief HCLK's Clock frequency + */ +#ifndef CONF_HCLK_FREQUENCY +#define CONF_HCLK_FREQUENCY 8000000 +#endif + +/** + * \def CONF_FCLK_FREQUENCY + * \brief FCLK's Clock frequency + */ +#ifndef CONF_FCLK_FREQUENCY +#define CONF_FCLK_FREQUENCY 8000000 +#endif + +/** + * \def CONF_CPU_FREQUENCY + * \brief CPU's Clock frequency + */ +#ifndef CONF_CPU_FREQUENCY +#define CONF_CPU_FREQUENCY 8000000 +#endif + +/** + * \def CONF_SLCK_FREQUENCY + * \brief Slow Clock frequency + */ +#define CONF_SLCK_FREQUENCY 32768 + +/** + * \def CONF_MCK_FREQUENCY + * \brief Master Clock frequency + */ +#define CONF_MCK_FREQUENCY 8000000 + +// <o> USB Clock Source +// <0=> USB Clock Controller (USB_48M) +// <id> usb_clock_source +// <i> Select the clock source for USB. +#ifndef CONF_UDP_SRC +#define CONF_UDP_SRC 0 +#endif + +/** + * \def CONF_UDP_FREQUENCY + * \brief UDP's Clock frequency + */ +#ifndef CONF_UDP_FREQUENCY +#define CONF_UDP_FREQUENCY 48005120 +#endif + +// <h> FLEXCOM Clock Settings +// <o> FLEXCOM Clock source +// <0=> Master Clock (MCK) +// <1=> MCK / 8 +// <2=> Programmable Clock Controller 6 (PMC_PCK6) +// <2=> Programmable Clock Controller 7 (PMC_PCK7) +// <3=> External Clock +// <i> This defines the clock source for the FLEXCOM, PCK6 is used for FLEXCOM0/1/2/3 and PCK7 is used for FLEXCOM4/5/6/7 +// <id> flexcom_clock_source +#ifndef CONF_FLEXCOM7_CK_SRC +#define CONF_FLEXCOM7_CK_SRC 0 +#endif + +// <o> FLEXCOM External Clock Input on SCK <1-4294967295> +// <i> Inputs the external clock frequency on SCK +// <id> flexcom_clock_freq +#ifndef CONF_FLEXCOM7_SCK_FREQ +#define CONF_FLEXCOM7_SCK_FREQ 10000000 +#endif + +#ifndef CONF_FLEXCOM7_FREQUENCY +#define CONF_FLEXCOM7_FREQUENCY 8000000 +#endif + +// <<< end of configuration section >>> + +#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/tinyusb/hw/bsp/samg55xplained/samg55j19_flash.ld b/tinyusb/hw/bsp/samg55xplained/samg55j19_flash.ld new file mode 100755 index 00000000..21c0b5bc --- /dev/null +++ b/tinyusb/hw/bsp/samg55xplained/samg55j19_flash.ld @@ -0,0 +1,158 @@ +/** + * \file + * + * \brief GCC linker script (flash) for ATSAMG55J19 + * + * Copyright (c) 2017 Atmel Corporation, a wholly owned subsidiary of Microchip Technology Inc. + * + * \license_start + * + * \page License + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \license_stop + * + */ + +/*------------------------------------------------------------------------------ + * Linker script for running in internal FLASH on the ATSAMG55J19 + *----------------------------------------------------------------------------*/ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00080000 /* rom, 524288K */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00028000 /* ram, 163840K */ +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x0400; + +/* The heapsize used by the application. NOTE: you need to adjust according to your application. */ +HEAP_SIZE = DEFINED(HEAP_SIZE) ? HEAP_SIZE : DEFINED(__heap_size__) ? __heap_size__ : 0x0200; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(0x4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* heap section */ + .heap (NOLOAD): + { + . = ALIGN(8); + _sheap = .; + . = . + HEAP_SIZE; + . = ALIGN(8); + _eheap = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; + _ram_end_ = ORIGIN(ram) + LENGTH(ram) - 1 ; +} diff --git a/tinyusb/hw/bsp/samg55xplained/samg55xplained.c b/tinyusb/hw/bsp/samg55xplained/samg55xplained.c new file mode 100755 index 00000000..ed106b06 --- /dev/null +++ b/tinyusb/hw/bsp/samg55xplained/samg55xplained.c @@ -0,0 +1,157 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "sam.h" +#include "bsp/board.h" + +#include "peripheral_clk_config.h" +#include "hal/include/hal_init.h" +#include "hal/include/hpl_usart_sync.h" +#include "hpl/pmc/hpl_pmc.h" +#include "hal/include/hal_gpio.h" + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#define LED_PIN GPIO(GPIO_PORTA, 6) + +#define BUTTON_PIN GPIO(GPIO_PORTA, 2) +#define BUTTON_STATE_ACTIVE 0 + +#define UART_TX_PIN GPIO(GPIO_PORTA, 28) +#define UART_RX_PIN GPIO(GPIO_PORTA, 27) + +struct _usart_sync_device edbg_com; + +//------------- IMPLEMENTATION -------------// +void board_init(void) +{ + init_mcu(); + + _pmc_enable_periph_clock(ID_PIOA); + + /* Disable Watchdog */ + hri_wdt_set_MR_WDDIS_bit(WDT); + + // LED + gpio_set_pin_level(LED_PIN, false); + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); + + // Button + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); + + // Uart via EDBG Com + _pmc_enable_periph_clock(ID_FLEXCOM7); + gpio_set_pin_function(UART_RX_PIN, MUX_PA27B_FLEXCOM7_RXD); + gpio_set_pin_function(UART_TX_PIN, MUX_PA28B_FLEXCOM7_TXD); + + _usart_sync_init(&edbg_com, FLEXCOM7); + _usart_sync_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); + _usart_sync_set_mode(&edbg_com, USART_MODE_ASYNCHRONOUS); + _usart_sync_enable(&edbg_com); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer (samd SystemCoreClock may not correct) + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + // USB Pin, Clock init + + /* Clear SYSIO 10 & 11 for USB DM & DP */ + hri_matrix_clear_CCFG_SYSIO_reg(MATRIX, CCFG_SYSIO_SYSIO10 | CCFG_SYSIO_SYSIO11); + + // Enable clock + _pmc_enable_periph_clock(ID_UDP); + + /* USB Device mode & Transceiver active */ + hri_matrix_write_CCFG_USBMR_reg(MATRIX, CCFG_USBMR_USBMODE); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void UDP_Handler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + uint8_t const * buf8 = (uint8_t const *) buf; + for(int i=0; i<len; i++) + { + while ( !_usart_sync_is_ready_to_send(&edbg_com) ) {} + _usart_sync_write_byte(&edbg_com, buf8[i]); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.h new file mode 100755 index 00000000..a3e03997 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN (32 + 30) // PB30 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN (0 + 15) // PA15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk new file mode 100755 index 00000000..81b4ecdc --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk @@ -0,0 +1,12 @@ +CFLAGS += -D__SAML21J18B__ + +SAML_VARIANT = saml21 + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/saml21j18b_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAML21J18 + +# flash using jlink +flash: flash-jlink diff --git a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld new file mode 100755 index 00000000..7f6b7fa9 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld @@ -0,0 +1,153 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAML21J18B + * + * Copyright (c) 2016 Atmel Corporation, + * a wholly owned subsidiary of Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 + lpram (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00002000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .lpram (NOLOAD): + { + . = ALIGN(8); + _slpram = .; + *(.lpram .lpram.*); + . = ALIGN(8); + _elpram = .; + } > lpram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.h b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.h new file mode 100755 index 00000000..13a32600 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.h @@ -0,0 +1,47 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA08 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PA06 +#define BUTTON_STATE_ACTIVE 0 + + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.mk b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.mk new file mode 100755 index 00000000..0605dca1 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -D__SAML22J18A__ + +SAML_VARIANT = saml22 + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAML22J18 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld new file mode 100755 index 00000000..d1aaa44f --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAML22J18A + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.h new file mode 100755 index 00000000..7fc690ab --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.h @@ -0,0 +1,47 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA21 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PA22 +#define BUTTON_STATE_ACTIVE 1 + + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk new file mode 100755 index 00000000..0605dca1 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -D__SAML22J18A__ + +SAML_VARIANT = saml22 + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAML22J18 + +flash: flash-bossac diff --git a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld new file mode 100755 index 00000000..d1aaa44f --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAML22J18A + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/tinyusb/hw/bsp/saml2x/family.c b/tinyusb/hw/bsp/saml2x/family.c new file mode 100755 index 00000000..470fde75 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/family.c @@ -0,0 +1,163 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "sam.h" +#include "bsp/board.h" +#include "board.h" + +#include "hal/include/hal_gpio.h" +#include "hal/include/hal_init.h" +#include "hpl/gclk/hpl_gclk_base.h" +#include "hpl_mclk_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_Handler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +/* Referenced GCLKs (out of 0~4), should be initialized firstly */ +#define _GCLK_INIT_1ST 0x00000000 +/* Not referenced GCLKs, initialized last */ +#define _GCLK_INIT_LAST 0x0000001F + +void board_init(void) +{ + // Clock init ( follow hpl_init.c ) + hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, CONF_NVM_WAIT_STATE); + + _set_performance_level(2); + + _osc32kctrl_init_sources(); + _oscctrl_init_sources(); + _mclk_init(); +#if _GCLK_INIT_1ST + _gclk_init_generators_by_fref(_GCLK_INIT_1ST); +#endif + _oscctrl_init_referenced_generators(); + _gclk_init_generators_by_fref(_GCLK_INIT_LAST); + +#if (CONF_PORT_EVCTRL_PORT_0 | CONF_PORT_EVCTRL_PORT_1 | CONF_PORT_EVCTRL_PORT_2 | CONF_PORT_EVCTRL_PORT_3) + hri_port_set_EVCTRL_reg(PORT, 0, CONF_PORTA_EVCTRL); + hri_port_set_EVCTRL_reg(PORT, 1, CONF_PORTB_EVCTRL); +#endif + + // Update SystemCoreClock since it is hard coded with asf4 and not correct + // Init 1ms tick timer (samd SystemCoreClock may not correct) + SystemCoreClock = CONF_CPU_FREQUENCY; + SysTick_Config(CONF_CPU_FREQUENCY / 1000); + + // Led init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(LED_PIN, !LED_STATE_ON); + + // Button init + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + /* USB Clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB Pin Init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); + + // Output 500hz PWM on PB23 (TCC0 WO[3]) so we can validate the GCLK1 clock speed +// hri_mclk_set_APBCMASK_TCC0_bit(MCLK); +// TCC0->PER.bit.PER = 48000000 / 1000; +// TCC0->CC[3].bit.CC = 48000000 / 2000; +// TCC0->CTRLA.bit.ENABLE = true; +// +// gpio_set_pin_function(PIN_PB23, PINMUX_PB23F_TCC0_WO3); +// hri_gclk_write_PCHCTRL_reg(GCLK, TCC0_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // button is active low + return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/saml2x/family.mk b/tinyusb/hw/bsp/saml2x/family.mk new file mode 100755 index 00000000..e0f6b2f7 --- /dev/null +++ b/tinyusb/hw/bsp/saml2x/family.mk @@ -0,0 +1,48 @@ +UF2_FAMILY_ID = 0x68ed2b88 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/microchip + +include $(TOP)/$(BOARD_PATH)/board.mk + +MCU_DIR = hw/mcu/microchip/$(SAML_VARIANT) + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -nostdlib -nostartfiles \ + -DCONF_OSC32K_CALIB_ENABLE=0 \ + -DCFG_TUSB_MCU=OPT_MCU_SAML22 + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + $(MCU_DIR)/gcc/gcc/startup_$(SAML_VARIANT).c \ + $(MCU_DIR)/gcc/system_$(SAML_VARIANT).c \ + $(MCU_DIR)/hpl/gclk/hpl_gclk.c \ + $(MCU_DIR)/hpl/mclk/hpl_mclk.c \ + $(MCU_DIR)/hpl/pm/hpl_pm.c \ + $(MCU_DIR)/hpl/osc32kctrl/hpl_osc32kctrl.c \ + $(MCU_DIR)/hpl/oscctrl/hpl_oscctrl.c \ + $(MCU_DIR)/hal/src/hal_atomic.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR)/ \ + $(TOP)/$(MCU_DIR)/config \ + $(TOP)/$(MCU_DIR)/include \ + $(TOP)/$(MCU_DIR)/hal/include \ + $(TOP)/$(MCU_DIR)/hal/utils/include \ + $(TOP)/$(MCU_DIR)/hpl/port \ + $(TOP)/$(MCU_DIR)/hri \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash-bossac: $(BUILD)/$(PROJECT).bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/tinyusb/hw/bsp/sltb009a/board.mk b/tinyusb/hw/bsp/sltb009a/board.mk new file mode 100755 index 00000000..e8a24d1b --- /dev/null +++ b/tinyusb/hw/bsp/sltb009a/board.mk @@ -0,0 +1,47 @@ +CFLAGS += \ + -flto \ + -mthumb \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__STARTUP_CLEAR_BSS \ + -D__START=main \ + -DEFM32GG12B810F1024GM64 \ + -DCFG_TUSB_MCU=OPT_MCU_EFM32GG12 + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=unused-parameter + +SILABS_FAMILY = efm32gg12b +SILABS_CMSIS = hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY)/Device/SiliconLabs/$(shell echo $(SILABS_FAMILY) | tr a-z A-Z) + +DEPS_SUBMODULES += hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY) +DEPS_SUBMODULES += lib/CMSIS_5 + +# All source paths should be relative to the top level. +LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(SILABS_FAMILY).ld + +SRC_C += \ + $(SILABS_CMSIS)/Source/system_$(SILABS_FAMILY).c \ + src/portable/silabs/efm32/dcd_efm32.c + +SRC_S += \ + $(SILABS_CMSIS)/Source/GCC/startup_$(SILABS_FAMILY).S + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(SILABS_CMSIS)/Include \ + $(TOP)/hw/bsp/$(BOARD) + +# For TinyUSB port source +VENDOR = silabs +CHIP_FAMILY = efm32 + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4 + +# For flash-jlink target +JLINK_DEVICE = EFM32GG12B810F1024 + +flash: flash-jlink diff --git a/tinyusb/hw/bsp/sltb009a/sltb009a.c b/tinyusb/hw/bsp/sltb009a/sltb009a.c new file mode 100755 index 00000000..b929adb1 --- /dev/null +++ b/tinyusb/hw/bsp/sltb009a/sltb009a.c @@ -0,0 +1,721 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Rafael Silva (@perigoso) + * Copyright (c) 2021 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "em_device.h" + +/*--------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM */ +/*--------------------------------------------------------------------*/ + +#define LED_PORT 0 // A +#define LED_PIN_R 12 // 12 +#define LED_PIN_B 13 // 13 +#define LED_PIN_G 14 // 14 +#define LED_STATE_ON 0 // active-low + +#define BUTTON_PORT 3 // D +#define BUTTON_PIN 5 // 5 +#define BUTTON_STATE_ACTIVE 0 // active-low + +/*--------------------------------------------------------------------*/ +/* Forward USB interrupt events to TinyUSB IRQ Handler */ +/*--------------------------------------------------------------------*/ + +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +/*--------------------------------------------------------------------*/ +/* Fault Handlers */ +/*--------------------------------------------------------------------*/ + +void HardFault_Handler(void) +{ + asm("bkpt"); +} + +void MemManage_Handler(void) +{ + asm("bkpt"); +} + +void BusFault_Handler(void) +{ + asm("bkpt"); +} + +void UsageFault_Handler(void) +{ + asm("bkpt"); +} + +/*--------------------------------------------------------------------*/ +/* Startup */ +/*--------------------------------------------------------------------*/ + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} + +/*--------------------------------------------------------------------*/ +/* Initing Funcs */ +/*--------------------------------------------------------------------*/ + +void emu_init(uint8_t immediate_switch) +{ + EMU->PWRCTRL = (immediate_switch ? EMU_PWRCTRL_IMMEDIATEPWRSWITCH : 0) | EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; +} + +void emu_reg_init(float target_voltage) +{ + if(target_voltage < 2300.f || target_voltage >= 3800.f) + return; + + uint8_t level = ((target_voltage - 2300.f) / 100.f); + + EMU->R5VCTRL = EMU_R5VCTRL_INPUTMODE_AUTO; + + EMU->R5VOUTLEVEL = level; /* Reg output to 3.3V*/ +} + +void emu_dcdc_init(float target_voltage, float max_ln_current, float max_lp_current, float max_reverse_current) +{ + if(target_voltage < 1800.f || target_voltage >= 3000.f) + return; + + if(max_ln_current <= 0.f || max_ln_current > 200.f) + return; + + if(max_lp_current <= 0.f || max_lp_current > 10000.f) + return; + + if(max_reverse_current < 0.f || max_reverse_current > 160.f) + return; + + // Low Power & Low Noise current limit + uint8_t lp_bias = 0; + + if(max_lp_current < 75.f) + lp_bias = 0; + else if(max_lp_current < 500.f) + lp_bias = 1; + else if(max_lp_current < 2500.f) + lp_bias = 2; + else + lp_bias = 3; + + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_LPCMPBIASEM234H_MASK) | ((uint32_t)lp_bias << _EMU_DCDCMISCCTRL_LPCMPBIASEM234H_SHIFT); + EMU->DCDCMISCCTRL |= EMU_DCDCMISCCTRL_LNFORCECCM; // Force CCM to prevent reverse current + EMU->DCDCLPCTRL |= EMU_DCDCLPCTRL_LPVREFDUTYEN; // Enable duty cycling of the bias for LP mode + EMU->DCDCLNFREQCTRL = (EMU->DCDCLNFREQCTRL & ~_EMU_DCDCLNFREQCTRL_RCOBAND_MASK) | 4; // Set RCO Band to 7MHz + + uint8_t fet_count = 0; + + if(max_ln_current < 20.f) + fet_count = 4; + else if(max_ln_current >= 20.f && max_ln_current < 40.f) + fet_count = 8; + else + fet_count = 16; + + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_NFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_NFETCNT_SHIFT); + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_PFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_PFETCNT_SHIFT); + + uint8_t ln_current_limit = (((max_ln_current + 40.f) * 1.5f) / (5.f * fet_count)) - 1; + uint8_t lp_current_limit = 1; // Recommended value + + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~(_EMU_DCDCMISCCTRL_LNCLIMILIMSEL_MASK | _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_MASK)) | ((uint32_t)ln_current_limit << _EMU_DCDCMISCCTRL_LNCLIMILIMSEL_SHIFT) | ((uint32_t)lp_current_limit << _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_SHIFT); + + uint8_t z_det_limit = ((max_reverse_current + 40.f) * 1.5f) / (2.5f * fet_count); + + EMU->DCDCZDETCTRL = (EMU->DCDCZDETCTRL & ~_EMU_DCDCZDETCTRL_ZDETILIMSEL_MASK) | ((uint32_t)z_det_limit << _EMU_DCDCZDETCTRL_ZDETILIMSEL_SHIFT); + + EMU->DCDCCLIMCTRL |= EMU_DCDCCLIMCTRL_BYPLIMEN; // Enable bypass current limiter to prevent overcurrent when switching modes + + // Output Voltage + if(target_voltage > 1800.f) + { + float max_vout = 3000.f; + float min_vout = 1800.f; + float diff_vout = max_vout - min_vout; + + uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_SHIFT; + uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_SHIFT; + + uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; + ln_vref += ln_vref_low; + + EMU->DCDCLNVCTRL = (ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT) | EMU_DCDCLNVCTRL_LNATT; + + uint8_t lp_vref_low = 0; + uint8_t lp_vref_high = 0; + + switch(lp_bias) + { + case 0: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; + } + break; + case 1: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; + } + break; + case 2: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; + } + break; + case 3: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; + } + break; + } + + uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; + lp_vref += lp_vref_low; + + EMU->DCDCLPVCTRL = (lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT) | EMU_DCDCLPVCTRL_LPATT; + } + else + { + float max_vout = 1800.f; + float min_vout = 1200.f; + float diff_vout = max_vout - min_vout; + + uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_SHIFT; + uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_SHIFT; + + uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; + ln_vref += ln_vref_low; + + EMU->DCDCLNVCTRL = ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT; + + uint8_t lp_vref_low = 0; + uint8_t lp_vref_high = 0; + + switch(lp_bias) + { + case 0: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; + } + break; + case 1: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; + } + break; + case 2: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; + } + break; + case 3: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; + } + break; + } + + uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; + lp_vref += lp_vref_low; + + EMU->DCDCLPVCTRL = lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT; + } + + EMU->DCDCLPCTRL = (EMU->DCDCLPCTRL & ~_EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_MASK) | (((DEVINFO->DCDCLPCMPHYSSEL1 & (((uint32_t)0xFF) << (lp_bias * 8))) >> (lp_bias * 8)) << _EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_SHIFT); + + while(EMU->DCDCSYNC & EMU_DCDCSYNC_DCDCCTRLBUSY); // Wait for configuration to write + + // Calibration + //EMU->DCDCLNCOMPCTRL = 0x57204077; // Compensation for 1uF DCDC capacitor + EMU->DCDCLNCOMPCTRL = 0xB7102137; // Compensation for 4.7uF DCDC capacitor + + // Enable DCDC converter + EMU->DCDCCTRL = EMU_DCDCCTRL_DCDCMODEEM4_EM4LOWPOWER | EMU_DCDCCTRL_DCDCMODEEM23_EM23LOWPOWER | EMU_DCDCCTRL_DCDCMODE_LOWNOISE; + + // Switch digital domain to DVDD + EMU->PWRCTRL = EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; +} + +void cmu_hfxo_startup_calib(uint16_t ib_trim, uint16_t c_tune) +{ + if(CMU->STATUS & CMU_STATUS_HFXOENS) + return; + + CMU->HFXOSTARTUPCTRL = (CMU->HFXOSTARTUPCTRL & ~(_CMU_HFXOSTARTUPCTRL_CTUNE_MASK | _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTARTUPCTRL_CTUNE_SHIFT) & _CMU_HFXOSTARTUPCTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK); +} + +void cmu_hfxo_steady_calib(uint16_t ib_trim, uint16_t c_tune) +{ + if(CMU->STATUS & CMU_STATUS_HFXOENS) + return; + + CMU->HFXOSTEADYSTATECTRL = (CMU->HFXOSTEADYSTATECTRL & ~(_CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK | _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTEADYSTATECTRL_CTUNE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK); +} + +void cmu_hfrco_calib(uint32_t calibration) +{ + if(CMU->STATUS & CMU_STATUS_DPLLENS) + return; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); + + CMU->HFRCOCTRL = calibration; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); +} + +void cmu_ushfrco_calib(uint8_t enable, uint32_t calibration) +{ + if(CMU->USBCRCTRL & CMU_USBCRCTRL_USBCREN) + return; + + if(!enable) + { + CMU->OSCENCMD = CMU_OSCENCMD_USHFRCODIS; + while(CMU->STATUS & CMU_STATUS_USHFRCOENS); + + return; + } + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); + + CMU->USHFRCOCTRL = calibration | CMU_USHFRCOCTRL_FINETUNINGEN; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); + + if(enable && !(CMU->STATUS & CMU_STATUS_USHFRCOENS)) + { + CMU->OSCENCMD = CMU_OSCENCMD_USHFRCOEN; + + while(!(CMU->STATUS & CMU_STATUS_USHFRCORDY)); + } +} + +void cmu_auxhfrco_calib(uint8_t enable, uint32_t calibration) +{ + if(!enable) + { + CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCODIS; + while(CMU->STATUS & CMU_STATUS_AUXHFRCOENS); + + return; + } + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); + + CMU->AUXHFRCOCTRL = calibration; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); + + if(enable && !(CMU->STATUS & CMU_STATUS_AUXHFRCOENS)) + { + CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCOEN; + + while(!(CMU->STATUS & CMU_STATUS_AUXHFRCORDY)); + } +} + + +void cmu_init(void) +{ + // Change SDIO clock to HFXO if HFRCO selected and disable it + CMU->SDIOCTRL = CMU_SDIOCTRL_SDIOCLKDIS | CMU_SDIOCTRL_SDIOCLKSEL_HFXO; + while(CMU->STATUS & CMU_STATUS_SDIOCLKENS); + + // Change QSPI clock to HFXO if HFRCO selected and disable it + CMU->QSPICTRL = CMU_QSPICTRL_QSPI0CLKDIS | CMU_QSPICTRL_QSPI0CLKSEL_HFXO; + while(CMU->STATUS & CMU_STATUS_QSPI0CLKENS); + + // Disable DPLL if enabled + if(CMU->STATUS & CMU_STATUS_DPLLENS) + { + CMU->OSCENCMD = CMU_OSCENCMD_DPLLDIS; + while(CMU->STATUS & CMU_STATUS_DPLLENS); + } + + // Disable HFXO if enabled + if(CMU->STATUS & CMU_STATUS_HFXOENS) + { + CMU->OSCENCMD = CMU_OSCENCMD_HFXODIS; + while(CMU->STATUS & CMU_STATUS_HFXOENS); + } + + // Setup HFXO + CMU->HFXOCTRL = CMU_HFXOCTRL_PEAKDETMODE_AUTOCMD | CMU_HFXOCTRL_MODE_XTAL; + CMU->HFXOCTRL1 = CMU_HFXOCTRL1_PEAKDETTHR_DEFAULT; + CMU->HFXOSTEADYSTATECTRL |= CMU_HFXOSTEADYSTATECTRL_PEAKMONEN; + CMU->HFXOTIMEOUTCTRL = (7 << _CMU_HFXOTIMEOUTCTRL_PEAKDETTIMEOUT_SHIFT) | (8 << _CMU_HFXOTIMEOUTCTRL_STEADYTIMEOUT_SHIFT) | (12 << _CMU_HFXOTIMEOUTCTRL_STARTUPTIMEOUT_SHIFT); + + // Enable HFXO and wait for it to be ready + CMU->OSCENCMD = CMU_OSCENCMD_HFXOEN; + while(!(CMU->STATUS & CMU_STATUS_HFXORDY)); + + // Switch main clock to HFXO and wait for it to be selected + CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFXO; + while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFXO); + + // Calibrate HFRCO for 72MHz and enable tunning by PLL + cmu_hfrco_calib((DEVINFO->HFRCOCAL16) | CMU_HFRCOCTRL_FINETUNINGEN); + + // Setup the PLL + CMU->DPLLCTRL = CMU_DPLLCTRL_REFSEL_HFXO | CMU_DPLLCTRL_AUTORECOVER | CMU_DPLLCTRL_EDGESEL_RISE | CMU_DPLLCTRL_MODE_FREQLL; + // 72MHz = 50MHz (HFXO) * 1.44 (144/100) + CMU->DPLLCTRL1 = (143 << _CMU_DPLLCTRL1_N_SHIFT) | (99 << _CMU_DPLLCTRL1_M_SHIFT); // fHFRCO = fHFXO * (N + 1) / (M + 1) + + // Enable the DPLL and wait for it to be ready + CMU->OSCENCMD = CMU_OSCENCMD_DPLLEN; + while(!(CMU->STATUS & CMU_STATUS_DPLLRDY)); + + // Config peripherals for the new frequency (freq > 32MHz) + CMU->CTRL |= CMU_CTRL_WSHFLE; + + // Set prescalers + CMU->HFPRESC = CMU_HFPRESC_HFCLKLEPRESC_DIV2 | CMU_HFPRESC_PRESC_NODIVISION; + CMU->HFBUSPRESC = 1 << _CMU_HFBUSPRESC_PRESC_SHIFT; + CMU->HFCOREPRESC = 0 << _CMU_HFCOREPRESC_PRESC_SHIFT; + CMU->HFPERPRESC = 1 << _CMU_HFPERPRESC_PRESC_SHIFT; + CMU->HFEXPPRESC = 0 << _CMU_HFEXPPRESC_PRESC_SHIFT; + CMU->HFPERPRESCB = 0 << _CMU_HFPERPRESCB_PRESC_SHIFT; + CMU->HFPERPRESCC = 1 << _CMU_HFPERPRESCC_PRESC_SHIFT; + + // Enable clock to peripherals + CMU->CTRL |= CMU_CTRL_HFPERCLKEN; + + // Switch main clock to HFRCO and wait for it to be selected + CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFRCO; + while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFRCO); + + // LFA Clock + CMU->LFACLKSEL = CMU_LFACLKSEL_LFA_LFRCO; + + // LFB Clock + CMU->LFBCLKSEL = CMU_LFBCLKSEL_LFB_LFRCO; + + // LFC Clock + CMU->LFCCLKSEL = CMU_LFCCLKSEL_LFC_LFRCO; + + // LFE Clock + CMU->LFECLKSEL = CMU_LFECLKSEL_LFE_ULFRCO; +} + +void systick_init(void) +{ + SysTick->LOAD = (72000000 / 1000) - 1; + SysTick->VAL = 0; + SysTick->CTRL = SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_CLKSOURCE_Msk; + + SCB->SHP[11] = 7 << (8 - __NVIC_PRIO_BITS); // Set priority 3,1 (min) +} + +void gpio_init(void) +{ + CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_GPIO; + + // NC - Not Connected (not available in mcu package) + // NR - Not routed (no routing to pin on pcb, floating) + // NU - Not used (not currently in use) + + // Port A + GPIO->P[0].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[0].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU + | GPIO_P_MODEL_MODE1_DISABLED // NU + | GPIO_P_MODEL_MODE2_DISABLED // NU + | GPIO_P_MODEL_MODE3_DISABLED // NU + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NU + | GPIO_P_MODEL_MODE7_DISABLED; // NC + GPIO->P[0].MODEH = GPIO_P_MODEH_MODE8_DISABLED // GPIO - MIC_ENABLE + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // NC + | GPIO_P_MODEH_MODE12_WIREDAND // LED0R + | GPIO_P_MODEH_MODE13_WIREDAND // LED0B + | GPIO_P_MODEH_MODE14_WIREDAND // LED0G + | GPIO_P_MODEH_MODE15_DISABLED; // NU + GPIO->P[0].DOUT = 0x7000; // Leds off By default + GPIO->P[0].OVTDIS = 0; + + // Port B + GPIO->P[1].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[1].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC + | GPIO_P_MODEL_MODE1_DISABLED // NC + | GPIO_P_MODEL_MODE2_DISABLED // NC + | GPIO_P_MODEL_MODE3_DISABLED // NU + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NU + | GPIO_P_MODEL_MODE7_DISABLED; // MAIN_LFXTAL_P + GPIO->P[1].MODEH = GPIO_P_MODEH_MODE8_DISABLED // MAIN_LFXTAL_N + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // PDM_DAT0 - MIC_DATA + | GPIO_P_MODEH_MODE12_DISABLED // PDM_CLK - MIC_CLOCK + | GPIO_P_MODEH_MODE13_DISABLED // MAIN_HFXTAL_P + | GPIO_P_MODEH_MODE14_DISABLED // MAIN_HFXTAL_N + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[1].DOUT = 0; + GPIO->P[1].OVTDIS = 0; + + // Port C + GPIO->P[2].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (7 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[2].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC + | GPIO_P_MODEL_MODE1_DISABLED // NC + | GPIO_P_MODEL_MODE2_DISABLED // NC + | GPIO_P_MODEL_MODE3_DISABLED // NC + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NC + | GPIO_P_MODEL_MODE7_DISABLED; // NC + GPIO->P[2].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // NC + | GPIO_P_MODEH_MODE12_DISABLED // NC + | GPIO_P_MODEH_MODE13_DISABLED // NC + | GPIO_P_MODEH_MODE14_DISABLED // NC + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[2].DOUT = 0; + GPIO->P[2].OVTDIS = 0; + + // Port D + GPIO->P[3].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[3].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU + | GPIO_P_MODEL_MODE1_DISABLED // NU + | GPIO_P_MODEL_MODE2_DISABLED // NU + | GPIO_P_MODEL_MODE3_DISABLED // NU + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_INPUT // GPIO - BTN0 + | GPIO_P_MODEL_MODE6_WIREDAND // LED1R + | GPIO_P_MODEL_MODE7_DISABLED; // NU + GPIO->P[3].MODEH = GPIO_P_MODEH_MODE8_INPUT // GPIO - BTN1 + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // NC + | GPIO_P_MODEH_MODE12_DISABLED // NC + | GPIO_P_MODEH_MODE13_DISABLED // NC + | GPIO_P_MODEH_MODE14_DISABLED // NC + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[3].DOUT = 0; + GPIO->P[3].OVTDIS = 0; + + // Port E + GPIO->P[4].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[4].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC + | GPIO_P_MODEL_MODE1_DISABLED // NC + | GPIO_P_MODEL_MODE2_DISABLED // NC + | GPIO_P_MODEL_MODE3_DISABLED // NC + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NU + | GPIO_P_MODEL_MODE7_DISABLED; // NU + GPIO->P[4].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NU + | GPIO_P_MODEH_MODE9_DISABLED // NU + | GPIO_P_MODEH_MODE10_DISABLED // NU + | GPIO_P_MODEH_MODE11_DISABLED // NU + | GPIO_P_MODEH_MODE12_WIREDAND // LED1B + | GPIO_P_MODEH_MODE13_DISABLED // NU + | GPIO_P_MODEH_MODE14_DISABLED // NU + | GPIO_P_MODEH_MODE15_DISABLED; // NU + GPIO->P[4].DOUT = 0; + GPIO->P[4].OVTDIS = 0; + + // Port F + GPIO->P[5].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[5].MODEL = GPIO_P_MODEL_MODE0_PUSHPULL // SWCLK + | GPIO_P_MODEL_MODE1_PUSHPULL // SWDIO + | GPIO_P_MODEL_MODE2_PUSHPULL // SWO + | GPIO_P_MODEL_MODE3_DISABLED // NC + | GPIO_P_MODEL_MODE4_DISABLED // NC + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NC + | GPIO_P_MODEL_MODE7_DISABLED; // NC + GPIO->P[5].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // USB N + | GPIO_P_MODEH_MODE11_DISABLED // USB P + | GPIO_P_MODEH_MODE12_WIREDAND // LED1G + | GPIO_P_MODEH_MODE13_DISABLED // NC + | GPIO_P_MODEH_MODE14_DISABLED // NC + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[5].DOUT = 0; + + GPIO->P[5].OVTDIS = 0; + + // Debugger Route + GPIO->ROUTEPEN &= ~(GPIO_ROUTEPEN_TDIPEN | GPIO_ROUTEPEN_TDOPEN); // Disable JTAG + GPIO->ROUTEPEN |= GPIO_ROUTEPEN_SWVPEN; // Enable SWO + GPIO->ROUTELOC0 = GPIO_ROUTELOC0_SWVLOC_LOC0; // SWO on PF2 + + // External interrupts + GPIO->EXTIPSELL = GPIO_EXTIPSELL_EXTIPSEL0_PORTE // NU + | GPIO_EXTIPSELL_EXTIPSEL1_PORTB // NU + | GPIO_EXTIPSELL_EXTIPSEL2_PORTB // NU + | GPIO_EXTIPSELL_EXTIPSEL3_PORTB // NU + | GPIO_EXTIPSELL_EXTIPSEL4_PORTA // NU + | GPIO_EXTIPSELL_EXTIPSEL5_PORTA // NU + | GPIO_EXTIPSELL_EXTIPSEL6_PORTC // NU + | GPIO_EXTIPSELL_EXTIPSEL7_PORTC; // NU + GPIO->EXTIPSELH = GPIO_EXTIPSELH_EXTIPSEL8_PORTA // NU + | GPIO_EXTIPSELH_EXTIPSEL9_PORTE // NU + | GPIO_EXTIPSELH_EXTIPSEL10_PORTF // NU + | GPIO_EXTIPSELH_EXTIPSEL11_PORTA // NU + | GPIO_EXTIPSELH_EXTIPSEL12_PORTA // NU + | GPIO_EXTIPSELH_EXTIPSEL13_PORTE // NU + | GPIO_EXTIPSELH_EXTIPSEL14_PORTF // NU + | GPIO_EXTIPSELH_EXTIPSEL15_PORTA; // NU + + GPIO->EXTIPINSELL = GPIO_EXTIPINSELL_EXTIPINSEL0_PIN3 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL1_PIN1 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL2_PIN2 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL3_PIN3 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL4_PIN6 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL5_PIN7 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL6_PIN4 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL7_PIN7; // NU + GPIO->EXTIPINSELH = GPIO_EXTIPINSELH_EXTIPINSEL8_PIN8 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL9_PIN9 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL10_PIN11 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL11_PIN8 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL12_PIN13 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL13_PIN15 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL14_PIN12 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL15_PIN12; // NU + +} + +/*--------------------------------------------------------------------*/ +/* Board Init */ +/*--------------------------------------------------------------------*/ + +void board_init(void) +{ + + emu_dcdc_init(1800.f, 50.f, 100.f, 0.f); // Init DC-DC converter (1.8 V, 50 mA active, 100 uA sleep, 0 mA reverse limit) + emu_init(0); + emu_reg_init(3300.f); // set output regulator to 3.3V + + cmu_hfxo_startup_calib(0x200, 0x145); // Config HFXO Startup for 1280 uA, 36 pF (18 pF + 2 pF CLOAD) + cmu_hfxo_steady_calib(0x009, 0x145); // Config HFXO Steady for 12 uA, 36 pF (18 pF + 2 pF CLOAD) + + cmu_init(); // Init Clock Management Unit + + cmu_ushfrco_calib(1, DEVINFO->USHFRCOCAL13); // Enable and calibrate USHFRCO for 48 MHz + cmu_auxhfrco_calib(1, DEVINFO->AUXHFRCOCAL11); // Enable and calibrate AUXHFRCO for 32 MHz + + CMU->USBCRCTRL = CMU_USBCRCTRL_USBCREN; // enable USB clock recovery + CMU->USBCTRL = CMU_USBCTRL_USBCLKSEL_USHFRCO | CMU_USBCTRL_USBCLKEN; // select USHFRCO as USB Phy clock source and enable it + + CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_USB; // enable USB peripheral clock + + systick_init(); // Init system tick + + gpio_init(); // Init IOs + +} + +/*--------------------------------------------------------------------*/ +/* Board porting API */ +/*--------------------------------------------------------------------*/ + +void board_led_write(bool state) +{ + // Combine red and blue for pink Because it looks good :) + GPIO->P[LED_PORT].DOUT = (GPIO->P[LED_PORT].DOUT & ~((1 << LED_PIN_R) | (1 << LED_PIN_B))) | (state << LED_PIN_R) | (state << LED_PIN_B); +} + +uint32_t board_button_read(void) +{ + return !!(GPIO->P[BUTTON_PORT].DIN & (1 << BUTTON_PIN)); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(char *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/tinyusb/hw/bsp/spresense/board.mk b/tinyusb/hw/bsp/spresense/board.mk new file mode 100755 index 00000000..a46c42bd --- /dev/null +++ b/tinyusb/hw/bsp/spresense/board.mk @@ -0,0 +1,73 @@ +DEPS_SUBMODULES += hw/mcu/sony/cxd56/spresense-exported-sdk + +# Platforms are: Linux, Darwin, MSYS, CYGWIN +PLATFORM := $(firstword $(subst _, ,$(shell uname -s 2>/dev/null))) + +ifeq ($(PLATFORM),Darwin) + # macOS + MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk +else ifeq ($(PLATFORM),Linux) + # Linux + MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk +else + # Cygwin/MSYS2 + MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk.exe +endif + +SERIAL ?= /dev/ttyUSB0 + +CFLAGS += \ + -DCONFIG_HAVE_DOUBLE \ + -Dmain=spresense_main \ + -pipe \ + -std=gnu11 \ + -mcpu=cortex-m4 \ + -mthumb \ + -mfpu=fpv4-sp-d16 \ + -mfloat-abi=hard \ + -mabi=aapcs \ + -fno-builtin \ + -fno-strength-reduce \ + -fomit-frame-pointer \ + -Wno-error=undef \ + -Wno-error=cast-align \ + -Wno-error=unused-parameter \ + -DCFG_TUSB_MCU=OPT_MCU_CXD56 \ + +# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration +CFLAGS += -Wno-error=shadow + +SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk + +SRC_C += src/portable/sony/cxd56/dcd_cxd56.c + +INC += \ + $(SPRESENSE_SDK)/nuttx/include \ + $(SPRESENSE_SDK)/nuttx/arch \ + $(SPRESENSE_SDK)/nuttx/arch/chip \ + $(SPRESENSE_SDK)/nuttx/arch/os \ + $(SPRESENSE_SDK)/sdk/include \ + +LIBS += \ + $(SPRESENSE_SDK)/nuttx/libs/libapps.a \ + $(SPRESENSE_SDK)/nuttx/libs/libnuttx.a \ + +LD_FILE = hw/mcu/sony/cxd56/spresense-exported-sdk/nuttx/scripts/ramconfig.ld + +LDFLAGS += \ + -Xlinker --entry=__start \ + -nostartfiles \ + -nodefaultlibs \ + -Wl,--gc-sections \ + -u spresense_main + +$(MKSPK): $(BUILD)/$(PROJECT).elf + $(MAKE) -C $(TOP)/hw/mcu/sony/cxd56/mkspk + +$(BUILD)/$(PROJECT).spk: $(MKSPK) + @echo CREATE $@ + @$(MKSPK) -c 2 $(BUILD)/$(PROJECT).elf nuttx $@ + +# flash +flash: $(BUILD)/$(PROJECT).spk + @$(TOP)/hw/mcu/sony/cxd56/tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $< diff --git a/tinyusb/hw/bsp/spresense/board_spresense.c b/tinyusb/hw/bsp/spresense/board_spresense.c new file mode 100755 index 00000000..256bccd1 --- /dev/null +++ b/tinyusb/hw/bsp/spresense/board_spresense.c @@ -0,0 +1,105 @@ +/* + * The MIT License (MIT) + * + * Copyright 2019 Sony Semiconductor Solutions Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <sys/boardctl.h> +#include <nuttx/arch.h> +#include <arch/board/board.h> +#include <arch/chip/pin.h> + +#include "bsp/board.h" + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ +#define LED_PIN PIN_I2S1_BCK + +#define BUTTON_PIN PIN_HIF_IRQ_OUT + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) +{ + boardctl(BOARDIOC_INIT, 0); + + board_gpio_write(PIN_I2S1_BCK, -1); + board_gpio_config(PIN_I2S1_BCK, 0, false, true, PIN_FLOAT); + + board_gpio_write(PIN_HIF_IRQ_OUT, -1); + board_gpio_config(PIN_HIF_IRQ_OUT, 0, true, true, PIN_FLOAT); +}; + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +// Turn LED on or off +void board_led_write(bool state) +{ + board_gpio_write(LED_PIN, state); +} + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void) +{ + if (board_gpio_read(BUTTON_PIN)) + { + return 0; + } + + return 1; +} + +// Get characters from UART +int board_uart_read(uint8_t *buf, int len) +{ + int r = read(0, buf, len); + + return r; +} + +// Send characters to UART +int board_uart_write(void const *buf, int len) +{ + int r = write(1, buf, len); + + return r; +} + +// Get current milliseconds +uint32_t board_millis(void) +{ + struct timespec tp; + + /* Wait until RTC is available */ + while (g_rtc_enabled == false); + + if (clock_gettime(CLOCK_MONOTONIC, &tp)) + { + return 0; + } + + return (((uint64_t)tp.tv_sec) * 1000 + tp.tv_nsec / 1000000); +} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h new file mode 100755 index 00000000..7c527e2c --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h @@ -0,0 +1,93 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_5 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART2 +#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF1_USART2 +#define UART_TX_PIN GPIO_PIN_2 +#define UART_RX_PIN GPIO_PIN_3 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f0_clock_init(void) +{ + /* Configure the system clock to 48 MHz */ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /* Enable HSE Oscillator and activate PLL with 8 MHz HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); + + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ; +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk new file mode 100755 index 00000000..9e636cd7 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F070xB + +LD_FILE = $(BOARD_PATH)/stm32F070rbtx_flash.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f070rb + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld new file mode 100755 index 00000000..59e18f37 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld @@ -0,0 +1,200 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for STM32F070RBTx Device from STM32F0 series +** 128Kbytes FLASH +** 16Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of STMicroelectronics nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004000; /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld new file mode 100755 index 00000000..8d31f6a0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F072RBTx Device with +** 128KByte FLASH, 16KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h new file mode 100755 index 00000000..0b1824b8 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h @@ -0,0 +1,85 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_6 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF1_USART1 +#define UART_TX_PIN GPIO_PIN_9 +#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f0_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Select HSI48 Oscillator as PLL source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI48; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV2; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK and PCLK1 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk new file mode 100755 index 00000000..2ef0ee63 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F072xB + +LD_FILE = $(BOARD_PATH)/STM32F072RBTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f072rb + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld new file mode 100755 index 00000000..581613a5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * Abstract : Linker script for STM32072B-EVAL Board embedding STM32F072VBTx Device from stm32f0 series + * 128Kbytes FLASH + * 16Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h new file mode 100755 index 00000000..8869d5dc --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h @@ -0,0 +1,102 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOD +#define LED_PIN GPIO_PIN_8 // LED1, GREEN +// #define LED_PIN GPIO_PIN_9 // LED2, ORANGE +// #define LED_PIN GPIO_PIN_10 // LED3, RED +// #define LED_PIN GPIO_PIN_11 // LED4, BLUE +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 // JOY_SEL +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_DEV USART2 +#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE +#define UART_GPIO_PORT GPIOD +#define UART_GPIO_AF GPIO_AF0_USART2 +#define UART_TX_PIN GPIO_PIN_5 +#define UART_RX_PIN GPIO_PIN_6 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f0_clock_init(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = + RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_USART2; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk new file mode 100755 index 00000000..f7f8c84e --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F072xB -DLSI_VALUE=40000 + +LD_FILE = $(BOARD_PATH)/STM32F072VBTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f072vb + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/family.c b/tinyusb/hw/bsp/stm32f0/family.c new file mode 100755 index 00000000..853bb9d6 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/family.c @@ -0,0 +1,179 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f0xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + board_stm32f0_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + + // Enable UART Clock + UART_CLK_EN(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // LED + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UART_DEV; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + + // USB Pins + // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // USB Clock enable + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + (void) file; (void) line; + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32f0/family.mk b/tinyusb/hw/bsp/stm32f0/family.mk new file mode 100755 index 00000000..08cbf562 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/family.mk @@ -0,0 +1,40 @@ +UF2_FAMILY_ID = 0x647824b6 +ST_FAMILY = f0 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F0 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align + +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 diff --git a/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h b/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h new file mode 100755 index 00000000..cfa66b36 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h @@ -0,0 +1,321 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_CONF_H +#define __STM32F0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_CEC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/*#define HAL_EXTI_MODULE_ENABLED */ +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ + +/* ######################### Oscillator Values adaptation ################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator for ADC (HSI14) value. + */ +#if !defined (HSI14_VALUE) + #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ + /* Warning: Must be set to higher priority for HAL_Delay() */ + /* and HAL_GetTick() usage under interrupt context */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ + #define USE_FULL_ASSERT 1 + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f0xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld new file mode 100755 index 00000000..ca180490 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** +** File : STM32F103XB_FLASH.ld +** +** Abstract : Linker script for STM32F103xB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h new file mode 100755 index 00000000..57a607ed --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -0,0 +1,92 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART1 +//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF1_USART1 +//#define UART_TX_PIN GPIO_PIN_9 +//#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f1_clock_init(void) +{ + RCC_ClkInitTypeDef clkinitstruct = {0}; + RCC_OscInitTypeDef oscinitstruct = {0}; + RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + oscinitstruct.HSEState = RCC_HSE_ON; + oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; + oscinitstruct.PLL.PLLState = RCC_PLL_ON; + oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + HAL_RCC_OscConfig(&oscinitstruct); + + /* USB clock selection */ + rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; + rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; + clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk new file mode 100755 index 00000000..9c690ca7 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F103X8_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f103c8 + +# flash target ROM bootloader +flash: flash-dfu-util diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld new file mode 100755 index 00000000..da40d1eb --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** +** File : STM32F103XB_FLASH.ld +** +** Abstract : Linker script for STM32F103xB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 48K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h new file mode 100755 index 00000000..bedce7f1 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -0,0 +1,92 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_8 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART1 +//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF1_USART1 +//#define UART_TX_PIN GPIO_PIN_9 +//#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f1_clock_init(void) +{ + RCC_ClkInitTypeDef clkinitstruct = {0}; + RCC_OscInitTypeDef oscinitstruct = {0}; + RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + oscinitstruct.HSEState = RCC_HSE_ON; + oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; + oscinitstruct.PLL.PLLState = RCC_PLL_ON; + oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + HAL_RCC_OscConfig(&oscinitstruct); + + /* USB clock selection */ + rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; + rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; + clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk new file mode 100755 index 00000000..eeda8708 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F103XC_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f103rc + +# flash target ROM bootloader +flash: flash-jlink diff --git a/tinyusb/hw/bsp/stm32f1/family.c b/tinyusb/hw/bsp/stm32f1/family.c new file mode 100755 index 00000000..8fcf9ebd --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/family.c @@ -0,0 +1,167 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f1xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_HP_IRQHandler(void) +{ + tud_int_handler(0); +} + +void USB_LP_IRQHandler(void) +{ + tud_int_handler(0); +} + +void USBWakeUp_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +void board_init(void) +{ + board_stm32f1_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // LED + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = LED_STATE_ON ? GPIO_PULLDOWN : GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // USB Pins + // Configure USB DM and DP pins. + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // USB Clock enable + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(char *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32f1/family.mk b/tinyusb/hw/bsp/stm32f1/family.mk new file mode 100755 index 00000000..3fb2e6e7 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/family.mk @@ -0,0 +1,45 @@ +ST_FAMILY = f1 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F1 + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=unused-parameter + +# All source paths should be relative to the top level. +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 + +# For flash-jlink target +JLINK_DEVICE = stm32f103c8 + +# flash target ROM bootloader +flash-dfu-util: $(BUILD)/$(PROJECT).bin + dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f1/stm32f1xx_hal_conf.h b/tinyusb/hw/bsp/stm32f1/stm32f1xx_hal_conf.h new file mode 100755 index 00000000..a4a3f308 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f1/stm32f1xx_hal_conf.h @@ -0,0 +1,379 @@ +/** + ****************************************************************************** + * @file USB_Device/HID_Standalone/Inc/stm32f1xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f1xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_CONF_H +#define __STM32F1xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#if defined(USE_STM3210C_EVAL) + #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ +#else + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f1xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f1xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f1xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f1xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f1xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32f1xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f1xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f1xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f1xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f1xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f1xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f1xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f1xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f1xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f1xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f1xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f1xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f1xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f1xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f1xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f1xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f1xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f1xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f1xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f1xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f1xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f1xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f1xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f1xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld new file mode 100755 index 00000000..29e387f2 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F207IGHx Device with +** 1024KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f207nucleo/board.mk b/tinyusb/hw/bsp/stm32f207nucleo/board.mk new file mode 100755 index 00000000..2b979f3d --- /dev/null +++ b/tinyusb/hw/bsp/stm32f207nucleo/board.mk @@ -0,0 +1,48 @@ +ST_FAMILY = f2 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DSTM32F207xx \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F2 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=sign-compare + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM3 + +# For flash-jlink target +JLINK_DEVICE = stm32f207zg + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f207nucleo/stm32f207nucleo.c b/tinyusb/hw/bsp/stm32f207nucleo/stm32f207nucleo.c new file mode 100755 index 00000000..619c90d6 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f207nucleo/stm32f207nucleo.c @@ -0,0 +1,213 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "stm32f2xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 120000000 + * HCLK(Hz) = 120000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 8000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 240 + * PLL_P = 2 + * PLL_Q = 5 + * VDD(V) = 3.3 + * Flash Latency(WS) = 3 + * @param None + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 240; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 5; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); +} + +void board_init(void) +{ + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + + all_rcc_clk_enable(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h b/tinyusb/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h new file mode 100755 index 00000000..2ab46b26 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h @@ -0,0 +1,407 @@ +/** + ****************************************************************************** + * @file stm32f2xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F2xx_HAL_CONF_H +#define __STM32F2xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f2xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f2xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f2xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f2xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f2xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f2xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f2xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f2xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f2xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f2xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f2xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f2xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f2xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f2xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f2xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f2xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f2xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f2xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f2xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f2xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f2xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f2xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f2xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f2xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f2xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f2xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f2xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f2xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f2xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f2xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f2xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f2xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f2xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f2xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F2xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/tinyusb/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld new file mode 100755 index 00000000..ca9046d2 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld @@ -0,0 +1,189 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F303VCTx Device with +** 256KByte FLASH, 40KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x2000a000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x800;; /* required amount of heap */ +_Min_Stack_Size = 0x800;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f303disco/board.mk b/tinyusb/hw/bsp/stm32f303disco/board.mk new file mode 100755 index 00000000..9dd27a85 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f303disco/board.mk @@ -0,0 +1,49 @@ +ST_FAMILY = f3 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DSTM32F303xC \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F3 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32F303VCTx_FLASH.ld + +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = stm32f303vc + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f303disco/stm32f303disco.c b/tinyusb/hw/bsp/stm32f303disco/stm32f303disco.c new file mode 100755 index 00000000..33552bc0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f303disco/stm32f303disco.c @@ -0,0 +1,215 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "stm32f3xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the +// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. + +// FIXME: Do all three need to be handled, or just the LP one? +// USB high-priority interrupt (Channel 74): Triggered only by a correct +// transfer event for isochronous and double-buffer bulk transfer to reach +// the highest possible transfer rate. +void USB_HP_IRQHandler(void) +{ + tud_int_handler(0); +} + +// USB low-priority interrupt (Channel 75): Triggered by all USB events +// (Correct transfer, USB reset, etc.). The firmware has to check the +// interrupt source before serving the interrupt. +void USB_LP_IRQHandler(void) +{ + tud_int_handler(0); +} + +// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB +// Suspend mode. +void USBWakeUp_RMP_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_9 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 72000000 + * HCLK(Hz) = 72000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 2 + * APB2 Prescaler = 1 + * HSE Frequency(Hz) = 8000000 + * HSE PREDIV = 1 + * PLLMUL = RCC_PLL_MUL9 (9) + * Flash Latency(WS) = 2 + * @param None + * @retval None + */ +static void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Configures the USB clock */ + HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + /* Enable Power Clock */ + __HAL_RCC_PWR_CLK_ENABLE(); +} + +void board_init(void) +{ + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + // Remap the USB interrupts + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_REMAPINTERRUPT_USB_ENABLE(); + + // LED + __HAL_RCC_GPIOE_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure USB DM and DP pins */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF14_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable USB clock + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h b/tinyusb/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h new file mode 100755 index 00000000..0abcbb01 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h @@ -0,0 +1,357 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_CONF_H +#define __STM32F3xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_PWR_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SDADC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) + * - External clock not generated on EVAL 373 + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1U*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f3xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f3xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f3xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f3xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f3xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f3xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f3xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f3xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f3xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f3xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f3xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f3xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f3xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f3xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f3xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f3xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f3xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32f3xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f3xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f3xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f3xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f3xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32f3xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f3xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f3xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f3xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SDADC_MODULE_ENABLED + #include "stm32f3xx_hal_sdadc.h" +#endif /* HAL_SDADC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f3xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f3xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f3xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f3xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f3xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f3xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f3xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f3xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld new file mode 100755 index 00000000..57ef61e2 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld @@ -0,0 +1,189 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F405RGTx Device with +** 1024KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.h new file mode 100755 index 00000000..19d0a1ea --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -0,0 +1,104 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_1 +#define LED_STATE_ON 1 + +// Button: Pin D5 +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_7 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART3 +#define UART_GPIO_PORT GPIOB +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_10 +#define UART_RX_PIN GPIO_PIN_11 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_USART3_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk new file mode 100755 index 00000000..1de56fe5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk @@ -0,0 +1,12 @@ +CFLAGS += -DSTM32F405xx + +LD_FILE = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f405rg + +# flash target ROM bootloader +flash: $(BUILD)/$(PROJECT).bin + dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..b892df3b --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h @@ -0,0 +1,491 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* Copied over manually- STM32Cube didn't generate these for some reason. */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld new file mode 100755 index 00000000..57ef61e2 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld @@ -0,0 +1,189 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F405RGTx Device with +** 1024KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.h b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.h new file mode 100755 index 00000000..685919c5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -0,0 +1,102 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Blue LED is chosen because the other LEDs are connected to ST-LINK lines. +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_4 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOB +#define BUTTON_PIN GPIO_PIN_3 +#define BUTTON_STATE_ACTIVE 1 + +// Enable PA2 as the debug log UART +// It is not routed to the ST/Link on the Discovery board. +//#define UART_DEV USART2 +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF7_USART2 +//#define UART_TX_PIN GPIO_PIN_2 +//#define UART_RX_PIN GPIO_PIN_3 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOB_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.mk b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.mk new file mode 100755 index 00000000..02dcd121 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F405xx + +LD_FILE = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f405rg + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..b892df3b --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h @@ -0,0 +1,491 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* Copied over manually- STM32Cube didn't generate these for some reason. */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld new file mode 100755 index 00000000..f51f1ab4 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F401VCTx Device with +** 256KByte FLASH, 64KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20010000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200;; /* required amount of heap */ +_Min_Stack_Size = 0x400;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h new file mode 100755 index 00000000..0f820512 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -0,0 +1,106 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 0 + +// Enable PA2 as the debug log UART +//#define UART_DEV USART2 +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF7_USART2 +//#define UART_TX_PIN GPIO_PIN_2 +//#define UART_RX_PIN GPIO_PIN_3 + + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + //__HAL_RCC_USART2_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Blackpill doens't use VBUS sense (B device) explicitly disable it + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk new file mode 100755 index 00000000..de0f3d4c --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk @@ -0,0 +1,12 @@ +CFLAGS += -DSTM32F401xC + +LD_FILE = $(BOARD_PATH)/STM32F401VCTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f401xc.s + +# For flash-jlink target +JLINK_DEVICE = stm32f401cc + +# flash target ROM bootloader +flash: $(BUILD)/$(PROJECT).bin + dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..2ab9a1d5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld new file mode 100755 index 00000000..c4160272 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld @@ -0,0 +1,189 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F407VGTx Device with +** 1024KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x1000; /* required amount of heap */ +_Min_Stack_Size = 0x4000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K + CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.h new file mode 100755 index 00000000..693e0393 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -0,0 +1,105 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOD +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// Enable PA2 as the debug log UART +// It is not routed to the ST/Link on the Discovery board. +#define UART_DEV USART2 +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF7_USART2 +#define UART_TX_PIN GPIO_PIN_2 +#define UART_RX_PIN GPIO_PIN_3 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_USART2_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.mk new file mode 100755 index 00000000..212b924b --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F407xx + +LD_FILE = $(BOARD_PATH)/STM32F407VGTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f407xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f407vg + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..7864f8d5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld new file mode 100755 index 00000000..efea1e06 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F411CEUx Device with +** 512KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200;; /* required amount of heap */ +_Min_Stack_Size = 0x400;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h new file mode 100755 index 00000000..0f820512 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -0,0 +1,106 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOC +#define LED_PIN GPIO_PIN_13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 0 + +// Enable PA2 as the debug log UART +//#define UART_DEV USART2 +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF7_USART2 +//#define UART_TX_PIN GPIO_PIN_2 +//#define UART_RX_PIN GPIO_PIN_3 + + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + //__HAL_RCC_USART2_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Blackpill doens't use VBUS sense (B device) explicitly disable it + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk new file mode 100755 index 00000000..78be4348 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk @@ -0,0 +1,12 @@ +CFLAGS += -DSTM32F411xE + +LD_FILE = $(BOARD_PATH)/STM32F411CEUx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s + +# For flash-jlink target +JLINK_DEVICE = stm32f411ce + +# flash target ROM bootloader +flash: $(BUILD)/$(PROJECT).bin + dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..2ab9a1d5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld new file mode 100755 index 00000000..3a0ce526 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F411VETx Device with +** 512KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200;; /* required amount of heap */ +_Min_Stack_Size = 0x400;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.h new file mode 100755 index 00000000..008a94a5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -0,0 +1,104 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Orange LED +#define LED_PORT GPIOD +#define LED_PIN GPIO_PIN_13 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// Enable PA2 as the debug log UART +#define UART_DEV USART2 +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF7_USART2 +#define UART_TX_PIN GPIO_PIN_2 +#define UART_RX_PIN GPIO_PIN_3 + + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_USART2_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.mk new file mode 100755 index 00000000..48272acf --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F411xE + +LD_FILE = $(BOARD_PATH)/STM32F411VETx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s + +# For flash-jlink target +JLINK_DEVICE = stm32f411ve + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..7864f8d5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld new file mode 100755 index 00000000..b00b5dbe --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F412ZGTx Device with +** 1024KByte FLASH, 256KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20040000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.h new file mode 100755 index 00000000..7f4a4fa1 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -0,0 +1,118 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_2 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable PA2 as the debug log UART +#define UART_DEV USART2 +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF7_USART2 +#define UART_TX_PIN GPIO_PIN_2 +#define UART_RX_PIN GPIO_PIN_3 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the + * device is clocked below the maximum system frequency, to update the + * voltage scaling value regarding system frequency refer to product + * datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 200; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + RCC_OscInitStruct.PLL.PLLR = 2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLLSAI output as USB clock source */ + PeriphClkInitStruct.PLLI2S.PLLI2SM = 8; + PeriphClkInitStruct.PLLI2S.PLLI2SQ = 4; + PeriphClkInitStruct.PLLI2S.PLLI2SN = 192; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CK48; + PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLI2SQ; + PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC; + PeriphClkInitStruct.PLLI2S.PLLI2SR = 7; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + * clocks dividers */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_USART2_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.mk new file mode 100755 index 00000000..50973f73 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F412Zx + +LD_FILE = $(BOARD_PATH)/STM32F412ZGTx_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f412zx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f412zg + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h new file mode 100755 index 00000000..7864f8d5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/family.c b/tinyusb/hw/bsp/stm32f4/family.c new file mode 100755 index 00000000..4a0dbcb1 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/family.c @@ -0,0 +1,191 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f4xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + board_clock_init(); + //SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + +#ifdef UART_DEV + // UART + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle = (UART_HandleTypeDef){ + .Instance = UART_DEV, + .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, + .Init.WordLength = UART_WORDLENGTH_8B, + .Init.StopBits = UART_STOPBITS_1, + .Init.Parity = UART_PARITY_NONE, + .Init.HwFlowCtl = UART_HWCONTROL_NONE, + .Init.Mode = UART_MODE_TX_RX, + .Init.OverSampling = UART_OVERSAMPLING_16 + }; + HAL_UART_Init(&UartHandle); +#endif + + /* Configure USB FS GPIOs */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /* Configure USB D+ D- Pins */ + GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* ID Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + +#ifdef STM32F412Zx + /* Configure POWER_SWITCH IO pin */ + __HAL_RCC_GPIOG_CLK_ENABLE(); + GPIO_InitStruct.Pin = GPIO_PIN_8; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); +#endif + + // Enable USB OTG clock + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + board_vbus_sense_init(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +#ifdef UART_DEV + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +#else + (void) buf; (void) len; (void) UartHandle; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32f4/family.mk b/tinyusb/hw/bsp/stm32f4/family.mk new file mode 100755 index 00000000..584d6940 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f4/family.mk @@ -0,0 +1,43 @@ +UF2_FAMILY_ID = 0x57755a57 +ST_FAMILY = f4 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F4 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld new file mode 100755 index 00000000..8645ce5c --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F723xE Device with +** 512KByte FLASH, 256KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20040000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.h new file mode 100755 index 00000000..d0ef6625 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -0,0 +1,101 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_10 +#define LED_STATE_ON 1 + +// No physical button is populated +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART6 +#define UART_CLK_EN __HAL_RCC_USART6_CLK_ENABLE +#define UART_GPIO_AF GPIO_AF8_USART6 + +#define UART_TX_PORT GPIOG +#define UART_TX_PIN GPIO_PIN_9 + +#define UART_RX_PORT GPIOG +#define UART_RX_PIN GPIO_PIN_14 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk new file mode 100755 index 00000000..a18b3231 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk @@ -0,0 +1,14 @@ +# Only OTG-HS has a connector on this board +PORT ?= 1 +SPEED ?= high + +CFLAGS += \ + -DSTM32F723xx \ + -DHSE_VALUE=25000000 \ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F723xE_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h new file mode 100755 index 00000000..581f0e46 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld new file mode 100755 index 00000000..8645ce5c --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F723xE Device with +** 512KByte FLASH, 256KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20040000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.h new file mode 100755 index 00000000..93d83efc --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -0,0 +1,105 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_1 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART6 +#define UART_CLK_EN __HAL_RCC_USART6_CLK_ENABLE +#define UART_GPIO_AF GPIO_AF8_USART6 + +#define UART_TX_PORT GPIOC +#define UART_TX_PIN GPIO_PIN_6 + +#define UART_RX_PORT GPIOC +#define UART_RX_PIN GPIO_PIN_7 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +//static inline void board_vbus_sense_init(void) +//{ +// +//} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.mk new file mode 100755 index 00000000..8f05199d --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.mk @@ -0,0 +1,12 @@ +PORT ?= 1 +SPEED ?= high + +CFLAGS += \ + -DSTM32F723xx \ + -DHSE_VALUE=25000000 \ + +LD_FILE = $(BOARD_PATH)/STM32F723xE_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h new file mode 100755 index 00000000..581f0e46 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld new file mode 100755 index 00000000..045ec76f --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F746ZGTx Device with +** 1024KByte FLASH, 320KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20050000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 320K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.h new file mode 100755 index 00000000..ee342b9f --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -0,0 +1,100 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOI +#define LED_PIN GPIO_PIN_1 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOI +#define BUTTON_PIN GPIO_PIN_11 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_AF GPIO_AF7_USART1 + +#define UART_TX_PORT GPIOA +#define UART_TX_PIN GPIO_PIN_9 + +#define UART_RX_PORT GPIOB +#define UART_RX_PIN GPIO_PIN_7 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.mk new file mode 100755 index 00000000..2ba59f67 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.mk @@ -0,0 +1,12 @@ +PORT ?= 1 +SPEED ?= high + +CFLAGS += \ + -DSTM32F746xx \ + -DHSE_VALUE=25000000 + +LD_FILE = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h new file mode 100755 index 00000000..03dec8f0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld new file mode 100755 index 00000000..b434a01b --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F746ZGTx Device with +** 1024KByte FLASH, 320KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20050000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 320K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h new file mode 100755 index 00000000..093445ed --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -0,0 +1,96 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_AF GPIO_AF7_USART3 + +#define UART_TX_PORT GPIOD +#define UART_TX_PIN GPIO_PIN_8 +#define UART_RX_PORT GPIOD +#define UART_RX_PIN GPIO_PIN_9 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk new file mode 100755 index 00000000..3dcf4817 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk @@ -0,0 +1,12 @@ +PORT ?= 0 +SPEED ?= full + +CFLAGS += \ + -DSTM32F746xx \ + -DHSE_VALUE=8000000 + +LD_FILE = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h new file mode 100755 index 00000000..234191b0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld new file mode 100755 index 00000000..0b6d5a49 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F767ZITx Device with +** 2048KByte FLASH, 512KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20080000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h new file mode 100755 index 00000000..1283f231 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -0,0 +1,102 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_AF GPIO_AF7_USART3 + +#define UART_TX_PORT GPIOD +#define UART_TX_PIN GPIO_PIN_8 + +#define UART_RX_PORT GPIOD +#define UART_RX_PIN GPIO_PIN_9 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + RCC_OscInitStruct.PLL.PLLR = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk new file mode 100755 index 00000000..2400a4ba --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk @@ -0,0 +1,12 @@ +PORT ?= 0 +SPEED ?= full + +CFLAGS += \ + -DSTM32F767xx \ + -DHSE_VALUE=8000000 \ + +LD_FILE = $(BOARD_PATH)/STM32F767ZITx_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f767xx.s + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h new file mode 100755 index 00000000..234191b0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld new file mode 100755 index 00000000..378ed80d --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F767ZITx Device with +** 2048KByte FLASH, 512KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20080000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.h new file mode 100755 index 00000000..5ec217f5 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -0,0 +1,101 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOJ +#define LED_PIN GPIO_PIN_12 +#define LED_STATE_ON 5 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_AF GPIO_AF7_USART1 + +#define UART_TX_PORT GPIOA +#define UART_TX_PIN GPIO_PIN_9 + +#define UART_RX_PORT GPIOA +#define UART_RX_PIN GPIO_PIN_10 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + RCC_OscInitStruct.PLL.PLLR = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.mk new file mode 100755 index 00000000..45b4a78c --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.mk @@ -0,0 +1,13 @@ +# Only OTG-HS has a connector on this board +PORT ?= 1 +SPEED ?= high + +CFLAGS += \ + -DSTM32F769xx \ + -DHSE_VALUE=25000000 \ + +LD_FILE = $(BOARD_PATH)/STM32F769ZITx_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f769xx.s + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h new file mode 100755 index 00000000..581f0e46 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/family.c b/tinyusb/hw/bsp/stm32f7/family.c new file mode 100755 index 00000000..c0d32459 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/family.c @@ -0,0 +1,306 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de), + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f7xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +// Despite being call USB2_OTG +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + board_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); // ULPI NXT + __HAL_RCC_GPIOI_CLK_ENABLE(); // ULPI NXT + +#ifdef __HAL_RCC_GPIOJ_CLK_ENABLE + __HAL_RCC_GPIOJ_CLK_ENABLE(); +#endif + + UART_CLK_EN(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart TX + GPIO_InitStruct.Pin = UART_TX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_TX_PORT, &GPIO_InitStruct); + + // Uart RX + GPIO_InitStruct.Pin = UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_RX_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UART_DEV; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + +#if BOARD_DEVICE_RHPORT_NUM == 0 + // OTG_FS + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure OTG-FS ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + +#if OTG_FS_VBUS_SENSE + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif // vbus sense + +#else + // OTG_HS + + #ifdef USB_HS_PHYC + // MCU with built-in HS PHY such as F723, F733, F730 + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_14 | GPIO_PIN_15); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + // Enable HS VBUS sense (B device) via pin PB13 + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; + + /* Configure OTG-HS ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_13; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* Enable PHYC Clocks */ + __HAL_RCC_OTGPHYC_CLK_ENABLE(); + + #else + // MUC with external ULPI PHY + + /* ULPI CLK */ + GPIO_InitStruct.Pin = GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* ULPI D0 */ + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* ULPI D1 D2 D3 D4 D5 D6 D7 */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* ULPI STP */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* NXT */ + GPIO_InitStruct.Pin = GPIO_PIN_4; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + /* ULPI DIR */ + GPIO_InitStruct.Pin = GPIO_PIN_11; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); + #endif // USB_HS_PHYC + + // Enable USB HS & ULPI Clocks + __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + +#if OTG_HS_VBUS_SENSE + #error OTG HS VBUS Sense enabled is not implemented +#else + // No VBUS sense + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + +#endif // BOARD_DEVICE_RHPORT_NUM + +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32f7/family.mk b/tinyusb/hw/bsp/stm32f7/family.mk new file mode 100755 index 00000000..ead0c977 --- /dev/null +++ b/tinyusb/hw/bsp/stm32f7/family.mk @@ -0,0 +1,54 @@ +UF2_FAMILY_ID = 0x53b80f00 +ST_FAMILY = f7 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) + ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") + else + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") + endif +else + $(info "Using OTG_FS") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=shadow -Wno-error=cast-align + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.h new file mode 100755 index 00000000..ab263d2b --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -0,0 +1,132 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_4 +#define LED_STATE_ON 1 + +// Tamper push-button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 0 + +// Need to change jumper setting J7 and J8 from RS-232 to STLink +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOB +#define UART_GPIO_AF GPIO_AF4_USART1 +#define UART_TX_PIN GPIO_PIN_14 +#define UART_RX_PIN GPIO_PIN_15 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /*!< Supply configuration update enable */ + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + + /* PLL1 for System Clock */ + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 160; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* PLL3 for USB Clock */ + PeriphClkInitStruct.PLL3.PLL3M = 25; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure bus clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /*activate CSI clock mondatory for I/O Compensation Cell*/ + __HAL_RCC_CSI_ENABLE() ; + + /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ + __HAL_RCC_SYSCFG_CLK_ENABLE() ; + + /* Enables the I/O Compensation Cell */ + HAL_EnableCompensationCell(); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.mk b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.mk new file mode 100755 index 00000000..96d14a79 --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.mk @@ -0,0 +1,13 @@ +CFLAGS += -DSTM32H743xx -DHSE_VALUE=25000000 + +# Default is Highspeed port +PORT ?= 1 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s +LD_FILE = $(BOARD_PATH)/stm32h743xx_flash.ld + +# For flash-jlink target +JLINK_DEVICE = stm32h743xi + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld new file mode 100755 index 00000000..59b9ff4d --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld @@ -0,0 +1,173 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32H743XIHx Device with +** 2048KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K +RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K +RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >DTCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >DTCMRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >DTCMRAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h new file mode 100755 index 00000000..3a31783a --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -0,0 +1,116 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_0 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_PORT GPIOD +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_8 +#define UART_RX_PIN GPIO_PIN_9 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* The PWR block is always enabled on the H7 series- there is no clock + enable. For now, use the default VOS3 scale mode (lowest) and limit clock + frequencies to avoid potential current draw problems from bus + power when using the max clock speeds throughout the chip. */ + + /* Enable HSE Oscillator and activate PLL1 with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 7; + RCC_OscInitStruct.PLL.PLLR = 2; /* Unused */ + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ + RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ + RCC_CLOCKTYPE_D3PCLK1); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; + + /* Unlike on the STM32F4 family, it appears the maximum APB frequencies are + device-dependent- 120 MHz for this board according to Figure 2 of + the datasheet. Dividing by half will be safe for now. */ + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; + + /* 4 wait states required for 168MHz and VOS3. */ + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /* Like on F4, on H7, USB's actual peripheral clock and bus clock are + separate. However, the main system PLL (PLL1) doesn't have a direct + connection to the USB peripheral clock to generate 48 MHz, so we do this + dance. This will connect PLL1's Q output to the USB peripheral clock. */ + RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; + + RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk new file mode 100755 index 00000000..fc670fe7 --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk @@ -0,0 +1,13 @@ +CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 + +# Default is FulSpeed port +PORT ?= 0 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s +LD_FILE = $(BOARD_PATH)/stm32h743xx_flash.ld + +# For flash-jlink target +JLINK_DEVICE = stm32h743zi + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld new file mode 100755 index 00000000..59b9ff4d --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld @@ -0,0 +1,173 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32H743XIHx Device with +** 2048KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K +RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K +RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >DTCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >DTCMRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >DTCMRAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h new file mode 100755 index 00000000..30a7a9ff --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -0,0 +1,134 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOJ +#define LED_PIN GPIO_PIN_2 +#define LED_STATE_ON 1 + +// Blue push-button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_PORT GPIOB +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_10 +#define UART_RX_PIN GPIO_PIN_11 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /*!< Supply configuration update enable */ + /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ + HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); + + /* The voltage scaling allows optimizing the power consumption when the + device is clocked below the maximum system frequency, to update the + voltage scaling value regarding system frequency refer to product + datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + + /* PLL1 for System Clock */ + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 160; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* PLL3 for USB Clock */ + PeriphClkInitStruct.PLL3.PLL3M = 25; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure bus clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /*activate CSI clock mondatory for I/O Compensation Cell*/ + __HAL_RCC_CSI_ENABLE() ; + + /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ + __HAL_RCC_SYSCFG_CLK_ENABLE() ; + + /* Enables the I/O Compensation Cell */ + HAL_EnableCompensationCell(); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.mk new file mode 100755 index 00000000..384065bd --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -0,0 +1,17 @@ +# STM32H745I-DISCO uses OTG_FS +# FIXME: Reset enumerates, un/replug USB plug does not enumerate + +CFLAGS += -DSTM32H745xx -DCORE_CM7 -DHSE_VALUE=25000000 + +# Default is FulSpeed port +PORT ?= 0 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s +LD_FILE = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld + +# For flash-jlink target +JLINK_DEVICE = stm32h745xi_m7 + +# flash target using on-board stlink +flash: flash-stlink + diff --git a/tinyusb/hw/bsp/stm32h7/family.c b/tinyusb/hw/bsp/stm32h7/family.c new file mode 100755 index 00000000..2cbd8741 --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/family.c @@ -0,0 +1,287 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 + * William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32h7xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +// Despite being call USB2_OTG +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + board_stm32h7_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOC_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOI_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOJ_CLK_ENABLE(); + + // Enable UART Clock + UART_CLK_EN(); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UART_DEV; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + +#if BOARD_DEVICE_RHPORT_NUM == 0 + // Despite being call USB2_OTG + // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port + // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* This for ID line debug */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // https://community.st.com/s/question/0D50X00009XkYZLSA3/stm32h7-nucleo-usb-fs-cdc + // TODO: Board init actually works fine without this line. + HAL_PWREx_EnableUSBVoltageDetector(); + __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); + +#if OTG_FS_VBUS_SENSE + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif // vbus sense + +#elif BOARD_DEVICE_RHPORT_NUM == 1 + // Despite being call USB2_OTG + // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port + + /* CLK */ + GPIO_InitStruct.Pin = GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* D0 */ + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* D1 D2 D3 D4 D5 D6 D7 */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* STP */ + GPIO_InitStruct.Pin = GPIO_PIN_0; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* NXT */ + GPIO_InitStruct.Pin = GPIO_PIN_4; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + /* DIR */ + GPIO_InitStruct.Pin = GPIO_PIN_11; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); + + // Enable USB HS & ULPI Clocks + __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); + __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); + +#if OTG_HS_VBUS_SENSE + #error OTG HS VBUS Sense enabled is not implemented +#else + // No VBUS sense + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + + HAL_PWREx_EnableUSBVoltageDetector(); +#endif // rhport = 1 + +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32h7/family.mk b/tinyusb/hw/bsp/stm32h7/family.mk new file mode 100755 index 00000000..e35e7561 --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/family.mk @@ -0,0 +1,51 @@ +UF2_FAMILY_ID = 0x6db66082 +ST_FAMILY = h7 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "PORT1 High Speed") +else + $(info "PORT0 Full Speed") +endif + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align + +# All source paths should be relative to the top level. +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + diff --git a/tinyusb/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/tinyusb/hw/bsp/stm32h7/stm32h7xx_hal_conf.h new file mode 100755 index 00000000..a7cc6d82 --- /dev/null +++ b/tinyusb/hw/bsp/stm32h7/stm32h7xx_hal_conf.h @@ -0,0 +1,483 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf_template.h + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32h7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_HAL_CONF_H +#define __STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_MDMA_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_RAMECC_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +//#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#error HSE_VALUE is not defined +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 1U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 ((uint8_t)0x02) +#define ETH_MAC_ADDR1 ((uint8_t)0x00) +#define ETH_MAC_ADDR2 ((uint8_t)0x00) +#define ETH_MAC_ADDR3 ((uint8_t)0x00) +#define ETH_MAC_ADDR4 ((uint8_t)0x00) +#define ETH_MAC_ADDR5 ((uint8_t)0x00) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/tinyusb/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld new file mode 100755 index 00000000..787418e0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32L053C8Tx Device with +** 64KByte FLASH, 8KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20002000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x200; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32l0538disco/board.mk b/tinyusb/hw/bsp/stm32l0538disco/board.mk new file mode 100755 index 00000000..c46887f1 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l0538disco/board.mk @@ -0,0 +1,53 @@ +ST_FAMILY = l0 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DSTM32L053xx \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_STM32L0 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld + +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = STM32L053R8 + +# Path to STM32 Cube Programmer CLI, should be added into system path +STM32Prog = STM32_Programmer_CLI + +# flash target using on-board stlink +flash: $(BUILD)/$(PROJECT).elf + $(STM32Prog) --connect port=swd --write $< --go diff --git a/tinyusb/hw/bsp/stm32l0538disco/stm32l0538disco.c b/tinyusb/hw/bsp/stm32l0538disco/stm32l0538disco.c new file mode 100755 index 00000000..f0f1d028 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l0538disco/stm32l0538disco.c @@ -0,0 +1,205 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "stm32l0xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_5 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow: + * HSI48 used as USB clock source + * - System Clock source = HSI + * - HSI Frequency(Hz) = 16000000 + * - SYSCLK(Hz) = 16000000 + * - HCLK(Hz) = 16000000 + * - AHB Prescaler = 1 + * - APB1 Prescaler = 1 + * - APB2 Prescaler = 1 + * - Flash Latency(WS) = 0 + * - Main regulator output voltage = Scale1 mode + * @param None + * @retval None + */ +static void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + static RCC_CRSInitTypeDef RCC_CRSInitStruct; + + /* Enable HSI Oscillator to be used as System clock source + Enable HSI48 Oscillator to be used as USB clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select HSI48 as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 + clock dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); + + /*Configure the clock recovery system (CRS)**********************************/ + + /*Enable CRS Clock*/ + __HAL_RCC_CRS_CLK_ENABLE(); + + /* Default Synchro Signal division factor (not divided) */ + RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ + RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + /* HSI48 is synchronized with USB SOF at 1KHz rate */ + RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); + RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; + /* Set the TRIM[5:0] to the default value*/ + RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; + /* Start automatic synchronization */ + HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); +} + +void board_init(void) +{ + SystemClock_Config(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + //__HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // USB + /* Configure DM DP Pins */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clock */ + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h b/tinyusb/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h new file mode 100755 index 00000000..773b74e2 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h @@ -0,0 +1,331 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * + * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L0xx_HAL_CONF_H +#define __STM32L0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +// #define HAL_ADC_MODULE_ENABLED +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_FIREWALL_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LCD_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +//#define HAL_RNG_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +//#define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +//#define HAL_PCD_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ + + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define PREREAD_ENABLE 1U +#define BUFFER_CACHE_DISABLE 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l0xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32l0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l0xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32l0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L0xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32l476disco/STM32L476VGTx_FLASH.ld b/tinyusb/hw/bsp/stm32l476disco/STM32L476VGTx_FLASH.ld new file mode 100755 index 00000000..98f468ac --- /dev/null +++ b/tinyusb/hw/bsp/stm32l476disco/STM32L476VGTx_FLASH.ld @@ -0,0 +1,183 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32L476VGTx Device with +** 1024KByte FLASH, 96KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20018000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x500; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(8); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(8); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(8); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(8); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(8); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(8); + } >FLASH + + .ARM.extab : + { + . = ALIGN(8); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(8); + } >FLASH + .ARM : { + . = ALIGN(8); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(8); + } >FLASH + + .preinit_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(8); + } >FLASH + + .init_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(8); + } >FLASH + .fini_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(8); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(8); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(8); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/stm32l476disco/board.mk b/tinyusb/hw/bsp/stm32l476disco/board.mk new file mode 100755 index 00000000..28824efd --- /dev/null +++ b/tinyusb/hw/bsp/stm32l476disco/board.mk @@ -0,0 +1,56 @@ +ST_FAMILY = l4 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DSTM32L476xx \ + -DCFG_TUSB_MCU=OPT_MCU_STM32L4 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32L476VGTx_FLASH.ld + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l476xx.s + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = stm32l476vg + +# Path to STM32 Cube Programmer CLI, should be added into system path +STM32Prog = STM32_Programmer_CLI + +# flash target using on-board stlink +flash: $(BUILD)/$(PROJECT).elf + $(STM32Prog) --connect port=swd --write $< --go diff --git a/tinyusb/hw/bsp/stm32l476disco/stm32l476disco.c b/tinyusb/hw/bsp/stm32l476disco/stm32l476disco.c new file mode 100755 index 00000000..b1884668 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l476disco/stm32l476disco.c @@ -0,0 +1,242 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "stm32l4xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_2 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D-, Button + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // VBUS pin +} + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * + * If define USB_USE_LSE_MSI_CLOCK enabled: + * System Clock source = PLL (MSI) + * SYSCLK(Hz) = 80000000 + * HCLK(Hz) = 80000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 1 + * APB2 Prescaler = 2 + * MSI Frequency(Hz) = 4800000 + * LSE Frequency(Hz) = 32768 + * PLL_M = 6 + * PLL_N = 40 + * PLL_P = 7 + * PLL_Q = 4 + * PLL_R = 4 + * Flash Latency(WS) = 4 + * @param None + * @retval None + */ +static void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /* Enable the LSE Oscillator */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Enable the CSS interrupt in case LSE signal is corrupted or not present */ + HAL_RCCEx_DisableLSECSS(); + + /* Set tick interrupt priority, default HAL value is intentionally invalid + and that prevents PLL initialization in HAL_RCC_OscConfig() */ + HAL_InitTick((1UL << __NVIC_PRIO_BITS) - 1UL); + + /* Enable MSI Oscillator and activate PLL with MSI as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; + RCC_OscInitStruct.PLL.PLLM = 6; + RCC_OscInitStruct.PLL.PLLN = 40; + RCC_OscInitStruct.PLL.PLLP = 7; + RCC_OscInitStruct.PLL.PLLQ = 4; + RCC_OscInitStruct.PLL.PLLR = 4; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Enable MSI Auto-calibration through LSE */ + HAL_RCCEx_EnableMSIPLLMode(); + + /* Select MSI output as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); +} + +void board_init(void) +{ + SystemClock_Config(); + all_rcc_clk_enable(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // USB + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_11; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* Enable USB FS Clock */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +} + +//--------------------------------------------------------------------+ +// board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32l476disco/stm32l4xx_hal_conf.h b/tinyusb/hw/bsp/stm32l476disco/stm32l4xx_hal_conf.h new file mode 100755 index 00000000..312f86da --- /dev/null +++ b/tinyusb/hw/bsp/stm32l476disco/stm32l4xx_hal_conf.h @@ -0,0 +1,420 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32l4xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_CONF_H +#define __STM32L4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_FIREWALL_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +// #define HAL_NOR_MODULE_ENABLED +// #define HAL_SRAM_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +//#define HAL_I2C_MODULE_ENABLED +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +//#define HAL_LCD_MODULE_ENABLED +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +//#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +//#define HAL_SAI_MODULE_ENABLED +//#define HAL_SD_MODULE_ENABLED +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/** + * @brief External clock source for SAI2 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) + #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32l4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32l4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32l4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l4xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32l4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l4xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32l4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32l4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32l4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32l4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32l4xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l4xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32l4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld b/tinyusb/hw/bsp/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld new file mode 100755 index 00000000..f93a1604 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32L4RxI Device with +** 2048KByte FLASH, 640KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x200a0000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 640K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/board.mk b/tinyusb/hw/bsp/stm32l4r5nucleo/board.mk new file mode 100755 index 00000000..12a291d0 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l4r5nucleo/board.mk @@ -0,0 +1,50 @@ +ST_FAMILY = l4 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DHSE_VALUE=8000000 \ + -DSTM32L4R5xx \ + -DCFG_TUSB_MCU=OPT_MCU_STM32L4 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32L4RXxI_FLASH.ld + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l4r5xx.s + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# flash target using on-board stlink +flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4r5nucleo.c b/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4r5nucleo.c new file mode 100755 index 00000000..bab66b55 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4r5nucleo.c @@ -0,0 +1,287 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "stm32l4xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +#define UARTx LPUART1 +#define UART_GPIO_PORT GPIOG +#define UART_GPIO_AF GPIO_AF8_LPUART1 +#define UART_TX_PIN GPIO_PIN_7 +#define UART_RX_PIN GPIO_PIN_8 + +UART_HandleTypeDef UartHandle; + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button + __HAL_RCC_GPIOG_CLK_ENABLE(); // Uart TX, RX + __HAL_RCC_LPUART1_CLK_ENABLE(); // LPUart1 module +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (MSI) + * SYSCLK(Hz) = 120000000 + * HCLK(Hz) = 120000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 1 + * APB2 Prescaler = 1 + * MSI Frequency(Hz) = 48000000 + * PLL_M = 12 + * PLL_N = 60 + * PLL_P = 2 + * PLL_Q = 2 + * VDD(V) = 3.3 + * Main regulator output voltage = Scale1 mode + * Flash Latency(WS) = 5 + * The USB clock configuration from PLLSAI: + * PLLSAIP = 8 FIXME + * PLLSAIN = 384 FIXME + * PLLSAIQ = 7 FIXME + * @param None + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /* Activate PLL with MSI , stabilizied via PLL by LSE */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; + RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; + RCC_OscInitStruct.PLL.PLLM = 12; + RCC_OscInitStruct.PLL.PLLN = 60; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Enable MSI Auto-calibration through LSE */ + HAL_RCCEx_EnableMSIPLLMode(); + + /* Select MSI output as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select MSI output as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1; + PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + // Avoid overshoot and start with HCLK 60 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); + + /* AHB prescaler divider at 1 as second step */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); +} + +void board_init(void) +{ + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + /* Enable voltage range 1 boost mode for frequency above 80 Mhz */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); + + /* Set tick interrupt priority, default HAL value is intentionally invalid + and that prevents PLL initialization in HAL_RCC_OscConfig() */ + + HAL_InitTick((1UL << __NVIC_PRIO_BITS) - 1UL); + + SystemClock_Config(); + all_rcc_clk_enable(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // IOSV bit MUST be set to access GPIO port G[2:15] */ + __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWREx_EnableVddIO2(); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UARTx; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + UartHandle.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + UartHandle.Init.ClockPrescaler = UART_PRESCALER_DIV1; + UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + + HAL_UART_Init(&UartHandle); + + /* Configure USB FS GPIOs */ + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4xx_hal_conf.h b/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4xx_hal_conf.h new file mode 100755 index 00000000..470ef129 --- /dev/null +++ b/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4xx_hal_conf.h @@ -0,0 +1,419 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32l4xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_CONF_H +#define __STM32L4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_FIREWALL_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +// #define HAL_NOR_MODULE_ENABLED +// #define HAL_SRAM_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +//#define HAL_I2C_MODULE_ENABLED +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +//#define HAL_LCD_MODULE_ENABLED +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +//#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +//#define HAL_SAI_MODULE_ENABLED +//#define HAL_SD_MODULE_ENABLED +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/** + * @brief External clock source for SAI2 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) + #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32l4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32l4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32l4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l4xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32l4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l4xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32l4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32l4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32l4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32l4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32l4xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l4xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32l4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/waveshare_openh743i/STM32H743IITX_FLASH.ld b/tinyusb/hw/bsp/waveshare_openh743i/STM32H743IITX_FLASH.ld new file mode 100755 index 00000000..73d2dedb --- /dev/null +++ b/tinyusb/hw/bsp/waveshare_openh743i/STM32H743IITX_FLASH.ld @@ -0,0 +1,175 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32H7 series +** 2048Kbytes FLASH and 192Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2019 STMicroelectronics. +** All rights reserved. +** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +**************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x2000 ; /* required amount of heap */ +_Min_Stack_Size = 0x2000 ; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K + RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K + RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K + RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K + ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/tinyusb/hw/bsp/waveshare_openh743i/board.c b/tinyusb/hw/bsp/waveshare_openh743i/board.c new file mode 100755 index 00000000..4468c066 --- /dev/null +++ b/tinyusb/hw/bsp/waveshare_openh743i/board.c @@ -0,0 +1,495 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 + * Benjamin Evans + * William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32h7xx_hal.h" +#include "stm32h7xx_hal_tim.h" +#include "bsp/board.h" + + +/* ** BOARD SETUP ** + * + * NOTE: This board has bad signal integrity so you may experience some problems. + * This setup assumes you have an openh743i-c Core and breakout board. For the HS + * examples it also assumes you have a waveshare USB3300 breakout board plugged + * into the ULPI PMOD header on the openh743i-c. + * + * UART Debugging: + * Due to pin conflicts in the HS configuration, this BSP uses USART3 (PD8, PD9). + * As such, you won't be able to use the UART to USB converter on board and will + * require an external UART to USB converter. You could use the waveshare FT232 + * USB UART Board (micro) but any 3.3V UART to USB converter will be fine. + * + * Fullspeed: + * If VBUS sense is enabled, ensure the PA9-VBUS jumper is connected on the core + * board. Connect the PB6 jumper for the LED and the Wakeup - PA0 jumper for the + * button. Connect the USB cable to the USB connector on the core board. + * + * High Speed: + * Remove all jumpers from the openh743i-c (especially the USART1 jumpers as the + * pins conflict). Connect the PB6 jumper for the LED and the Wakeup - PA0 + * jumper for the button. + * + * The reset pin on the ULPI PMOD port is not connected to the MCU. You'll need + * to solder a wire from the RST pin on the USB3300 to a pin of your choosing on + * the openh743i-c board (this example assumes you've used PD14 as specified with + * the ULPI_RST_PORT and ULPI_RST_PIN defines below). + * + * Preferably power the board using the external 5VDC jack. Connect the USB cable + * to the USB connector on the ULPI board. Adjust delays in this file as required. + * + * If you're having trouble, ask a question on the tinyUSB Github Discussion boards. + * + * Have fun! + * +*/ + +//--------------------------------------------------------------------+ +// BOARD DEFINES +//--------------------------------------------------------------------+ + +//LED Pin +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_6 +#define LED_STATE_ON 1 + +//ULPI PHY reset pin +#define ULPI_RST_PORT GPIOD +#define ULPI_RST_PIN GPIO_PIN_14 + +// Tamper push-button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// Need external UART to USB converter as USART1 pins conflict with HS ULPI pins +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_PORT GPIOD +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_8 +#define UART_RX_PIN GPIO_PIN_9 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +UART_HandleTypeDef uartHandle; +TIM_HandleTypeDef tim2Handle; + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +// Despite being call USB2_OTG +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + // Supply configuration update enable + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + // Configure the main internal regulator output voltage + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0); + + while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) + { + } + // Macro to configure the PLL clock source + __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE); + + // Initializes the RCC Oscillators according to the specified parameters in the RCC_OscInitTypeDef structure. + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 2; + RCC_OscInitStruct.PLL.PLLN = 240; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_USART3; + PeriphClkInitStruct.PLL3.PLL3M = 8; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_0; + PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_PLL3; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + // Initializes the CPU, AHB and APB buses clocks + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1 | RCC_CLOCKTYPE_D1PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + __HAL_RCC_CSI_ENABLE(); + + // Enable SYSCFG clock mondatory for I/O Compensation Cell + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + // Enables the I/O Compensation Cell + HAL_EnableCompensationCell(); + + // Enable voltage detector + HAL_PWREx_EnableUSBVoltageDetector(); + + return; +} + + +//--------------------------------------------------------------------+ +// Timer implementation for board delay +// This should be OS safe and doesn't require the scheduler to be running +//--------------------------------------------------------------------+ +static void init_timer(void) +{ + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + + __HAL_RCC_TIM2_CLK_ENABLE(); + + //Assuming timer clock is running at 260Mhz this should configure the timer counter to 1000Hz + tim2Handle.Instance = TIM2; + tim2Handle.Init.Prescaler = 60000U - 1U; + tim2Handle.Init.CounterMode = TIM_COUNTERMODE_UP; + tim2Handle.Init.Period = 0xFFFFFFFFU; + tim2Handle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; + tim2Handle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + HAL_TIM_Base_Init(&tim2Handle); + + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + HAL_TIM_ConfigClockSource(&tim2Handle, &sClockSourceConfig); + + //Start the timer + HAL_TIM_Base_Start(&tim2Handle); + + return; +} + + +// Custom board delay implementation using timer ticks +static inline void timer_board_delay(uint32_t ms) +{ + uint32_t startMs = __HAL_TIM_GET_COUNTER(&tim2Handle); + while ((__HAL_TIM_GET_COUNTER(&tim2Handle) - startMs) < ms) + { + asm("nop"); //do nothing + } +} + + +//Board initialisation +void board_init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + // Init clocks + board_stm32h7_clock_init(); + + // Init timer for delays + init_timer(); + + //Disable systick for now + //If using an RTOS and the systick interrupt fires without the scheduler running you might have an issue + //Because this init code now introduces delays, the systick should be disabled until after board init + SysTick->CTRL &= ~1U; + + // Enable GPIO clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOI_CLK_ENABLE(); + + // Enable UART Clock + UART_CLK_EN(); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // PHY RST Pin + GPIO_InitStruct.Pin = ULPI_RST_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(ULPI_RST_PORT, &GPIO_InitStruct); + HAL_GPIO_WritePin(ULPI_RST_PORT, ULPI_RST_PIN, 0U); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + uartHandle.Instance = UART_DEV; + uartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + uartHandle.Init.WordLength = UART_WORDLENGTH_8B; + uartHandle.Init.StopBits = UART_STOPBITS_1; + uartHandle.Init.Parity = UART_PARITY_NONE; + uartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + uartHandle.Init.Mode = UART_MODE_TX_RX; + uartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&uartHandle); + +#if BOARD_DEVICE_RHPORT_NUM == 0 + //Full Speed + + // Configure DM DP Pins + GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // This for ID line debug + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); + +#if OTG_FS_VBUS_SENSE + // Configure VBUS Pin + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif // vbus sense + +#elif BOARD_DEVICE_RHPORT_NUM == 1 + //High Speed + + /**USB_OTG_HS GPIO Configuration + PC0 ------> USB_OTG_HS_ULPI_STP + PC2_C ------> USB_OTG_HS_ULPI_DIR + PC3_C ------> USB_OTG_HS_ULPI_NXT + PA3 ------> USB_OTG_HS_ULPI_D0 + PA5 ------> USB_OTG_HS_ULPI_CK + PB1 ------> USB_OTG_HS_ULPI_D2 + PB10 ------> USB_OTG_HS_ULPI_D3 + PB11 ------> USB_OTG_HS_ULPI_D4 + PB12 ------> USB_OTG_HS_ULPI_D5 + PB13 ------> USB_OTG_HS_ULPI_D6 + PB5 ------> USB_OTG_HS_ULPI_D7 + */ + + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_3 | GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + // Peripheral clock enable + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); + +#if OTG_HS_VBUS_SENSE +#error OTG HS VBUS Sense enabled is not implemented +#else + // No VBUS sense + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + + //Reset the PHY - Change the delays as you see fit + timer_board_delay(5U); //Delay 5ms + HAL_GPIO_WritePin(ULPI_RST_PORT, ULPI_RST_PIN, 1U); + timer_board_delay(20U); //Delay 20ms + HAL_GPIO_WritePin(ULPI_RST_PORT, ULPI_RST_PIN, 0U); + timer_board_delay(20U); //Delay 20ms + +#endif // rhport = 1 + + //Disable the timer used for delays + HAL_TIM_Base_Stop(&tim2Handle); + __HAL_RCC_TIM2_CLK_DISABLE(); + + // Configure systick 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + + //Enable systick + SysTick->CTRL |= ~1U; + + return; +} + + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + + +uint32_t board_button_read(void) +{ + return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; +} + + +int board_uart_read(uint8_t *buf, int len) +{ + (void)buf; + (void)len; + return 0; +} + + +int board_uart_write(void const *buf, int len) +{ + HAL_UART_Transmit(&uartHandle, (uint8_t *)buf, len, 0xffff); + return len; +} + + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + + +void HardFault_Handler(void) +{ + asm("bkpt"); +} + + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ +}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/waveshare_openh743i/board.mk b/tinyusb/hw/bsp/waveshare_openh743i/board.mk new file mode 100755 index 00000000..721df1bd --- /dev/null +++ b/tinyusb/hw/bsp/waveshare_openh743i/board.mk @@ -0,0 +1,64 @@ +UF2_FAMILY_ID = 0x6db66082 +ST_FAMILY = h7 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +# Default is HS port +PORT ?= 1 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s +LD_FILE = $(BOARD_PATH)/STM32H743IITX_FLASH.ld + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) \ + -DSTM32H743xx \ + -DHSE_VALUE=8000000 + +ifeq ($(PORT), 1) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "PORT1 High Speed") +else + $(info "PORT0 Full Speed") +endif + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align + +# All source paths should be relative to the top level. +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim_ex.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + +# For flash-jlink target +JLINK_DEVICE = stm32h743ii + +# flash target using jlink +flash: flash-jlink
\ No newline at end of file diff --git a/tinyusb/hw/bsp/waveshare_openh743i/stm32h7xx_hal_conf.h b/tinyusb/hw/bsp/waveshare_openh743i/stm32h7xx_hal_conf.h new file mode 100755 index 00000000..11d29ed6 --- /dev/null +++ b/tinyusb/hw/bsp/waveshare_openh743i/stm32h7xx_hal_conf.h @@ -0,0 +1,483 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf_template.h + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32h7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_HAL_CONF_H +#define __STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_MDMA_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_RAMECC_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +//#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#error HSE_VALUE is not defined +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 1U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 ((uint8_t)0x02) +#define ETH_MAC_ADDR1 ((uint8_t)0x00) +#define ETH_MAC_ADDR2 ((uint8_t)0x00) +#define ETH_MAC_ADDR3 ((uint8_t)0x00) +#define ETH_MAC_ADDR4 ((uint8_t)0x00) +#define ETH_MAC_ADDR5 ((uint8_t)0x00) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |