1 files changed, 153 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c
new file mode 100755
index 00000000..da62e7bd
--- /dev/null
+++ b/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c
@@ -0,0 +1,153 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "bsp/board.h"
+#include "NuMicro.h"
+#include "clk.h"
+#include "sys.h"
+
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USBD_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+#define LED_PORT              PC
+#define LED_PIN               9
+#define LED_PIN_IO            PC9
+#define LED_STATE_ON          0
+
+#define CRYSTAL_LESS /* system will be 48MHz when defined, otherwise, system is 72MHz */
+#define HIRC48_AUTO_TRIM    SYS_IRCTCTL1_REFCKSEL_Msk | (1UL << SYS_IRCTCTL1_LOOPSEL_Pos) | (2UL << SYS_IRCTCTL1_FREQSEL_Pos)
+#define TRIM_INIT           (SYS_BASE+0x118)
+
+void board_init(void)
+{
+  /* Unlock protected registers */
+  SYS_UnlockReg();
+
+  /*---------------------------------------------------------------------------------------------------------*/
+  /* Init System Clock                                                                                       */
+  /*---------------------------------------------------------------------------------------------------------*/
+
+  /* Enable Internal RC 22.1184 MHz clock */
+  CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk);
+
+  /* Waiting for Internal RC clock ready */
+  CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk);
+
+  /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */
+  CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1));
+
+#ifndef CRYSTAL_LESS
+  /* Enable external XTAL 12 MHz clock */
+  CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk);
+
+  /* Waiting for external XTAL clock ready */
+  CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk);
+
+  /* Set core clock */
+  CLK_SetCoreClock(72000000);
+
+  /* Use HIRC as UART clock source */
+  CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1));
+
+  /* Use PLL as USB clock source */
+  CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_PLL, CLK_CLKDIV0_USB(3));
+
+#else
+  /* Enable Internal RC 48MHz clock */
+  CLK_EnableXtalRC(CLK_PWRCTL_HIRC48EN_Msk);
+
+  /* Waiting for Internal RC clock ready */
+  CLK_WaitClockReady(CLK_STATUS_HIRC48STB_Msk);
+
+  /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */
+  CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC48, CLK_CLKDIV0_HCLK(1));
+
+  /* Use HIRC as UART clock source */
+  CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1));
+
+  /* Use HIRC48 as USB clock source */
+  CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC48, CLK_CLKDIV0_USB(1));
+#endif
+
+  /* Enable module clock */
+  CLK_EnableModuleClock(USBD_MODULE);
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(48000000 / 1000);
+#endif
+
+  // LED
+  GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT);
+}
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON));
+}
+
+uint32_t board_button_read(void)
+{
+  return 0;
+}
+
+int board_uart_read(uint8_t* buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+int board_uart_write(void const * buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}