1 files changed, 77 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h
new file mode 100755
index 00000000..b3a7bc44
--- /dev/null
+++ b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h
@@ -0,0 +1,77 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+// Note: For USB Host demo, install JP4
+// WARNING: don't install JP4 when running as device
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED Red
+#define LED_PORT      3
+#define LED_PIN       7
+
+// ISP Button
+#define BUTTON_PORT   0
+#define BUTTON_PIN    7
+
+#define UART_DEV      LPC_USART0
+
+static inline void board_lpc18_pinmux(void)
+{
+  const PINMUX_GRP_T pinmuxing[] =
+  {
+    // LEDs
+    { 0x6, 9 , SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 },
+    { 0x6, 11, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 },
+
+    // Button
+    { 0x2, 7, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0 },
+
+    // UART
+    { 0x06, 4, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 },
+    { 0x02, 1, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1 },
+
+    // USB0
+    //{ 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 },		                // P6_3 USB0_PWR_EN, USB0 VBus function
+
+    //{ 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 },			              // P9_5 USB1_VBUS_EN, USB1 VBus function
+    //{ 0x2, 5, SCU_MODE_INACT  | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION
+    {0x2, 5, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC4 },
+  };
+
+  Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif