diff options
Diffstat (limited to 'tinyusb/examples/device/usbtmc/src/usb_descriptors.c')
-rwxr-xr-x | tinyusb/examples/device/usbtmc/src/usb_descriptors.c | 194 |
1 files changed, 0 insertions, 194 deletions
diff --git a/tinyusb/examples/device/usbtmc/src/usb_descriptors.c b/tinyusb/examples/device/usbtmc/src/usb_descriptors.c deleted file mode 100755 index 2336266b..00000000 --- a/tinyusb/examples/device/usbtmc/src/usb_descriptors.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "tusb.h" -#include "class/usbtmc/usbtmc.h" -#include "class/usbtmc/usbtmc_device.h" - -/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. - * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. - * - * Auto ProductID layout's Bitmap: - * [MSB] HID | MSC | CDC [LSB] - */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) - -//--------------------------------------------------------------------+ -// Device Descriptors -//--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = 0x00, - .bDeviceSubClass = 0x00, - .bDeviceProtocol = 0x00, - - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0100, - - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, - - .bNumConfigurations = 0x01 -}; - -// Invoked when received GET DEVICE DESCRIPTOR -// Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; -} - -//--------------------------------------------------------------------+ -// Configuration Descriptor -//--------------------------------------------------------------------+ - -#if defined(CFG_TUD_USBTMC) - -# define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints) \ - TUD_USBTMC_IF_DESCRIPTOR(_itfnum, _bNumEndpoints, /*_stridx = */ 4u, TUD_USBTMC_PROTOCOL_USB488), \ - TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */USBTMCD_MAX_PACKET_SIZE) - -#if CFG_TUD_USBTMC_ENABLE_INT_EP -// USBTMC Interrupt xfer always has length of 2, but we use epMaxSize=8 for -// compatibility with mcus that only allow 8, 16, 32 or 64 for FS endpoints -# define TUD_USBTMC_DESC(_itfnum) \ - TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3), \ - TUD_USBTMC_INT_DESCRIPTOR(/* INT ep # */ 0x82, /* epMaxSize = */ 8, /* bInterval = */16u ) -# define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN + TUD_USBTMC_INT_DESCRIPTOR_LEN) - -#else - -# define TUD_USBTMC_DESC(_itfnum) \ - TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u) -# define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN) - -#endif /* CFG_TUD_USBTMC_ENABLE_INT_EP */ - -#else -# define USBTMC_DESC_LEN (0) -#endif /* CFG_TUD_USBTMC */ - -enum -{ - ITF_NUM_USBTMC, - ITF_NUM_TOTAL -}; - - -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_USBTMC_DESC_LEN) - -#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - // Note: since CDC EP ( 1 & 2), HID (4) are spot-on, thus we only need to force - // endpoint number for MSC to 5 - #define EPNUM_MSC 0x05 -#else - #define EPNUM_MSC 0x03 -#endif - - -uint8_t const desc_configuration[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), - - TUD_USBTMC_DESC(ITF_NUM_USBTMC), -}; - -// Invoked when received GET CONFIGURATION DESCRIPTOR -// Application return pointer to descriptor -// Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void) index; // for multiple configurations - return desc_configuration; -} - -//--------------------------------------------------------------------+ -// String Descriptors -//--------------------------------------------------------------------+ - -// array of pointer to string descriptors -char const* string_desc_arr [] = -{ - (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) - "TinyUSB", // 1: Manufacturer - "TinyUSB Device", // 2: Product - "123456", // 3: Serials, should use chip ID - "TinyUSB USBTMC", // 4: USBTMC -}; - -static uint16_t _desc_str[32]; - -// Invoked when received GET STRING DESCRIPTOR request -// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) -{ - (void) langid; - - size_t chr_count; - - if ( index == 0) - { - memcpy(&_desc_str[1], string_desc_arr[0], 2); - chr_count = 1; - } - else - { - // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. - // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - - if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; - - const char* str = string_desc_arr[index]; - - // Cap at max char - chr_count = strlen(str); - if ( chr_count > 31 ) { - chr_count = 31; - } - - // Convert ASCII string into UTF-16 - for(uint8_t i=0; i<chr_count; i++) - { - _desc_str[1+i] = str[i]; - } - } - - // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); - - return _desc_str; -} |