diff options
Diffstat (limited to 'tinyusb/docs/info/changelog.rst')
| m--------- | tinyusb | 0 | ||||
| -rwxr-xr-x | tinyusb/docs/info/changelog.rst | 513 |
2 files changed, 0 insertions, 513 deletions
diff --git a/tinyusb b/tinyusb new file mode 160000 +Subproject f8288be03f28ad7b944e6925f49422dfa39202c diff --git a/tinyusb/docs/info/changelog.rst b/tinyusb/docs/info/changelog.rst deleted file mode 100755 index 80205a72..00000000 --- a/tinyusb/docs/info/changelog.rst +++ /dev/null @@ -1,513 +0,0 @@ -********* -Changelog -********* - -0.10.1 (03-06-221) -=================== - -- rework rp2040 examples and CMake build, allow better integration with pico-sdk - -Host Controller Driver (HCD) ----------------------------- - -- Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes -- Improve hub driver -- Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer() -- Use hcd_frame_number() instead of micro frame -- Fix OHCI endpoint address and xferred_bytes in xfer complete event - - -0.10.0 (28-05-2021) -=================== - -- Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode -- Improve audio_test example and add audio_4_channel_mic example -- Add new dfu example -- Remove pico-sdk from submodule - -Device Controller Driver (DCD) ------------------------------- - -- Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A) -- Add new DCD port Renesas RX63N, board GR-CITRUS -- Add new (optional) endpoint API dcd_edpt_xfer_fifo -- Fix build with nRF5340 -- Fix build with lpc15 and lpc54 -- Fix build with lpc177x_8x -- STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API -- Support LPC55 port1 highspeed -- Add support for Espressif esp32s3 -- nRF: fix race condition that could cause drop packet of Bulk OUT transfer - -USB Device Driver (USBD) ------------------------- - -- Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo - -Device Class Driver -------------------- - -CDC - -- [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter. - -DFU - -- Add new DFU 1.1 class driver (WIP) - -HID - -- Fix keyboard report descriptor template -- Add more hid keys constant from 0x6B to 0xA4 -- [Breaking] rename API - - HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE - - tud_hid_boot_mode() to tud_hid_get_protocol() - - tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb() - -MIDI - -- Fix MIDI buffer overflow issue -- [Breaking] rename API - - Rename tud_midi_read() to tud_midi_stream_read() - - Rename tud_midi_write() to tud_midi_stream_write() - - Rename tud_midi_receive() to tud_midi_packet_read() - - Rename tud_midi_send() to tud_midi_packet_write() - -Host Controller Driver (HCD) ----------------------------- - -- No noticable changes - -USB Host Driver (USBH) ----------------------- - -- No noticable changes - -Host Class Driver ------------------ - -- HID: Rework host hid driver, basically everything changes - - -0.9.0 (12-03-2021) -================== - -Device Stack ------------- - -Device Controller Driver (DCD) -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -RP2040 - -- Fix endpoint buffer reallocation overrun problem -- Fix osal_pico queue overflow in initialization -- Fix Isochronous endpoint buffer size in transfer -- Optimize hardware endpoint struct to reduce RAM usage -- Fix enum walkaround forever check for SE0 when pull up is disabled - -Sony CXD56 - -- Pass the correct speed on Spresense -- Fix setup processed flag - -NXP Transdimention - -- Update dcd_init() to reset controller to device mode - -USB Device Driver (USBD) -^^^^^^^^^^^^^^^^^^^^^^^^ - -- Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint. -- Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64 -- Ack SET_INTERFACE even if it is not implemented by class driver. - -Device Class Driver -^^^^^^^^^^^^^^^^^^^ - -DFU Runtime - -- rename dfu_rt to dfu_runtime for easy reading - -CDC - -- Add tud_cdc_send_break_cb() to support break request -- Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo - -HID - -- [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes - - tud_hid_descriptor_report_cb() - - tud_hid_get_report_cb() - - tud_hid_set_report_cb() - - tud_hid_boot_mode_cb() - - tud_hid_set_idle_cb() -- Add report complete callback tud_hid_report_complete_cb() API -- Add DPad/Hat support for HID Gamepad - - `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad - - Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum - - Add Gamepad to hid_composite / hid_composite_freertos example - -MIDI - -- Fix dropping MIDI sysex message when fifo is full -- Fix typo in tud_midi_write24(), make example less ambigous for cable and channel -- Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7) - -Host Stack ----------- - -Host Controller Driver (HCD) -^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -- Add rhport to hcd_init() -- Improve EHCI/OHCI driver abstraction - - Move echi/ohci files to portable/ - - Rename hcd_lpc18_43 to hcd_transdimension - - Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr() -- Update NXP transdimention hcd_init() to reset controller to host mode - - Ported hcd to rt10xx - -USB Host Driver (USBH) -^^^^^^^^^^^^^^^^^^^^^^ - -- No noticeable changes to usbh - -Host Class Driver -^^^^^^^^^^^^^^^^^ - -MSC - -- Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry() -- Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming -- Change tuh_msc_is_busy() to tuh_msc_ready() -- Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10() -- Read_Capacity is invoked as part of enumeration process -- Add tuh_msc_get_block_count(), tuh_msc_get_block_size() -- Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities - -Others ------- - -- Add basic support for rt-thread OS -- Change zero bitfield length to more explicit padding -- Build example now fetch required submodules on the fly while running `make` without prio submodule init for mcu drivers -- Update pico-sdk to v1.1.0 - -**New Boards** - -- Microchip SAM E54 Xplained Pro -- LPCXpresso 55s28 -- LPCXpresso 18s37 - - -0.8.0 (05-02-2021) -================== - -Device Controller Driver ------------------------- - -- Added new device support for Raspberry Pi RP2040 -- Added new device support for NXP Kinetis KL25ZXX -- Use dcd_event_bus_reset() with link speed to replace bus_signal -- ESP32-S2: - - Add bus suspend and wakeup support -- SAMD21: - - Fix (walkaround) samd21 setup_packet overflow by USB DMA -- STM32 Synopsys: - - Rework USB FIFO allocation scheme and allow RX FIFO size reduction -- Sony CXD56 - - Update Update Spresense SDK to 2.0.2 - - Fix dcd issues with setup packets - - Correct EP number for cdc_msc example - -USB Device ----------- - -**USBD** - -- Rework usbd control transfer to have additional stage parameter for setup, data, status -- Fix tusb_init() return true instead of TUSB_ERROR_NONE -- Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet - -**Class Driver** - -- CDC - - Allow to transmit data, even if the host does not support control line states i.e set DTR -- HID - - change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64 -- MIDI - - Fix midi sysex sending bug -- MSC - - Invoke only scsi complete callback after status transaction is complete. - - Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error. -- USBTMC - - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu - -**Example** - -- Support make from windows cmd.exe -- Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples - - -USB Host --------- - -No noticeable changes to host stack - -New Boards ----------- - -- NXP/Freescale Freedom FRDM-KL25Z -- Feather Double M33 express -- Raspberry Pi Pico -- Adafruit Feather RP2040 -- Adafruit Itsy Bitsy RP2040 -- Adafruit QT RP2040 -- Adfruit Feather ESP32-S2 -- Adafruit Magtag 29" Eink -- Adafruit Metro ESP32-S2 -- Adafruit PyBadge -- Adafruit PyPortal -- Great Scott Gadgets' LUNA D11 & D21 - - -0.7.0 (08-11-2020) -================== - -Device Controller Driver ------------------------- - -- Added new support for Espressif ESP32-S2 -- Added new support for Dialog DA1469x -- Enhance STM32 Synopsys -- Support bus events disconnection/suspend/resume/wakeup - - Improve transfer performance with optimizing xfer and fifo size - - Support Highspeed port (OTG_HS) with both internal and external PHY - - Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY) - - Add ISO transfer, fix odd/even frame - - Fix FIFO flush during stall - - Implement dcd_edpt_close() API - - Support F105, F107 -- Enhance STM32 fsdev - - Improve dcd fifo allocation - - Fix ISTR race condition - - Support remap USB IRQ on supported MCUs - - Implement dcd_edpt_close() API -- Enhance NUC 505: enhance set configure behavior -- Enhance SAMD - - Fix race condition with setup packet - - Add SAMD11 option `OPT_MCU_SAMD11` - - Add SAME5x option `OPT_MCU_SAME5X` -- Fix SAMG control data toggle and stall race condition -- Enhance nRF - - Fix hanged when tud_task() is called within critical section (disabled interrupt) - - Fix disconnect bus event not submitted - - Implement ISO transfer and dcd_edpt_close() - - -USB Device ----------- - -**USBD** - -- Add new class driver for **Bluetooth HCI** class driver with example can be found in [mynewt-tinyusb-example](https://github.com/hathach/mynewt-tinyusb-example) since it needs mynewt OS to run with. -- Fix USBD endpoint usage racing condition with `usbd_edpt_claim()/usbd_edpt_release()` -- Added `tud_task_event_ready()` and `osal_queue_empty()`. This API is needed to check before enter low power mode with WFI/WFE -- Rename USB IRQ Handler to `dcd_int_handler()`. Application must define IRQ handler in which it calls this API. -- Add `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D- on supported MCUs. -- Add `usbd_edpt_open()` -- Remove `dcd_set_config()` -- Add *OPT_OS_CUMSTOM* as hook for application to overwrite and/or add their own OS implementation -- Support SET_INTERFACE, GET_INTERFACE request -- Add Logging for debug with optional uart/rtt/swo printf retarget or `CFG_TUSB_DEBUG_PRINTF` hook -- Add IAR compiler support -- Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument -- Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()` -- Enhance class driver management - - `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver - - Add application implemented class driver via `usbd_app_driver_get_cb()` - - IAD is handled to assign driver id -- Added `tud_descriptor_device_qualifier_cb()` callback -- Optimize `tu_fifo` bulk write/read transfer -- Forward non-std control request to class driver -- Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string) -- Fix OSAL FreeRTOS yield from ISR - -**Class Drivers** - -- USBNET: remove ACM-EEM due to lack of support from host -- USBTMC: fix descriptors when INT EP is disabled -- CDC: - - Send zero length packet for end of data when needed - - Add `tud_cdc_tx_complete_cb()` callback - - Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo -- MIDI: - - Add packet interface - - Add multiple jack descriptors - - Fix MIDI driver for sysex -- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request -- Rename some configure macro to make it clear that those are used directly for endpoint transfer - - CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE - - CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE - - CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE - - CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE -- HID: - - Fix gamepad template descriptor - - Add multiple HID interface API - - Add extra comma to HID_REPORT_ID - -USB Host --------- - -- Rework USB host stack (still work in progress) - - Fix compile error with pipehandle - - Rework usbh control and enumeration as non-blocking -- Improve Hub, MSC, HID host driver - -Examples --------- - -- Add new hid_composite_freertos -- Add new dynamic_configuration to demonstrate how to switch configuration descriptors -- Add new hid_multiple_interface -- Enhance `net_lwip_webserver` example - - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) - - Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver -- Added new Audio example: audio_test uac2_headsest - -New Boards ----------- - -- Espressif ESP32-S2: saola_1, kaluga_1 -- STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo -- Dialog DA1469x dk pro and dk usb -- Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro -- nRF: ItsyBitsy nRF52840 - - -0.6.0 (30-03-2020) -================== - -Added **CONTRIBUTORS.md** to give proper credit for contributors to the stack. Special thanks to `Nathan Conrad <https://github.com/pigrew>`__ , `Peter Lawrence <https://github.com/majbthrd>`__ , `William D. Jones <https://github.com/cr1901>`__ and `Sean Cross <https://github.com/xobs>`__ and others for spending their precious time to add lots of features and ports for this release. - -Added ------ - -**MCU** - -- Added support for Microchip SAMG55 -- Added support for Nordic nRF52833 -- Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505 -- Added support for NXP LPC: 51Uxx, 54xxx, 55xx -- Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 -- Added support for Sony CXD56 (Spresense) -- Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7 -- Added support for TI MSP430 -- Added support for ValentyUSB's eptri - -**Class Driver** - -- Added DFU Runtime class driver -- Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress) -- Added USBTMC class driver -- Added WebUSB class driver using vendor-specific class -- Added multiple instances support for CDC and MIDI -- Added a handful of unit test with Ceedling. -- Added LOG support for debugging with CFG_TUSB_DEBUG -- Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1) -- Added `dcd_edpt0_status_complete()` as optional API for DCD - -**Examples** - -Following examples are added: - -- board_test -- cdc_dual_ports -- dfu_rt -- hid_composite -- net_lwip_webserver -- usbtmc -- webusb_serial - -**Boards** - -Following boards are added: - -- adafruit_clue -- arduino_nano33_ble -- circuitplayground_bluefruit -- circuitplayground_express -- feather_m0_express -- feather_nrf52840_sense -- feather_stm32f405 -- fomu -- itsybitsy_m0 -- itsybitsy_m4 -- lpcxpresso11u37 -- lpcxpresso1549 -- lpcxpresso51u68 -- lpcxpresso54114 -- lpcxpresso55s69 -- mbed1768 -- mimxrt1010_evk -- mimxrt1015_evk -- mimxrt1020_evk -- mimxrt1050_evkb -- mimxrt1060_evk -- mimxrt1064_evk -- msp_exp430f5529lp -- ngx4330 -- nrf52840_mdk_dongle -- nutiny_nuc121s -- nutiny_nuc125s -- nutiny_nuc126v -- nutiny_sdk_nuc120 -- nutiny_sdk_nuc505 -- pca10059 -- pca10100 -- pyboardv11 -- raytac_mdbt50q_rx -- samg55xplained -- seeeduino_xiao -- spresense -- stm32f070rbnucleo -- stm32f072disco -- stm32f103bluepill -- stm32f207nucleo -- stm32f401blackpill -- stm32f411blackpill -- stm32f411disco -- stm32f412disco -- stm32f767nucleo -- stm32h743nucleo -- stm32l0538disco -- stm32l476disco -- teensy_40 - -Changed -------- - -- Changed `tud_descriptor_string_cb()` to have additional Language ID argument -- Merged hal_nrf5x.c into dcd_nrf5x.c -- Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c -- Generalized dcd_stm32f4.c to dcd_synopsys.c -- Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs -- Improved DCD SAMD stability, fix missing setup packet occasionally -- Improved usbd/usbd_control with proper hanlding of zero-length packet (ZLP) -- Improved STM32 DCD FSDev -- Improved STM32 DCD Synopsys -- Migrated CI from Travis to Github Action -- Updated nrfx submodule to 2.1.0 -- Fixed mynewt osal queue definition -- Fixed cdc_msc_freertos example build for all MCUs - - -0.5.0 (06-2019) -=============== - -First release, device stack works great, host stack works but still need improvement. - -- Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc... -- Thanks to @cr1901 for adding STM32F4 port. -- Thanks to @PTS93 and @todbot for HID raw API |