diff options
Diffstat (limited to 'Smol Watch Project/My Project/Config/hpl_port_config.h')
| -rw-r--r-- | Smol Watch Project/My Project/Config/hpl_port_config.h | 284 |
1 files changed, 0 insertions, 284 deletions
diff --git a/Smol Watch Project/My Project/Config/hpl_port_config.h b/Smol Watch Project/My Project/Config/hpl_port_config.h deleted file mode 100644 index 1efce33e..00000000 --- a/Smol Watch Project/My Project/Config/hpl_port_config.h +++ /dev/null @@ -1,284 +0,0 @@ -/* Auto-generated config file hpl_port_config.h */ -#ifndef HPL_PORT_CONFIG_H -#define HPL_PORT_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -// <e> PORT Input Event 0 configuration -// <id> enable_port_input_event_0 -#ifndef CONF_PORT_EVCTRL_PORT_0 -#define CONF_PORT_EVCTRL_PORT_0 0 -#endif - -// <h> PORT Input Event 0 configuration on PORT A - -// <q> PORTA Input Event 0 Enable -// <i> The event action will be triggered on any incoming event if PORT A Input Event 0 configuration is enabled -// <id> porta_input_event_enable_0 -#ifndef CONF_PORTA_EVCTRL_PORTEI_0 -#define CONF_PORTA_EVCTRL_PORTEI_0 0x0 -#endif - -// <o> PORTA Event 0 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port A on which the event action will be performed -// <id> porta_event_pin_identifier_0 -#ifndef CONF_PORTA_EVCTRL_PID_0 -#define CONF_PORTA_EVCTRL_PID_0 0x0 -#endif - -// <o> PORTA Event 0 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT A will perform on event input 0 -// <id> porta_event_action_0 -#ifndef CONF_PORTA_EVCTRL_EVACT_0 -#define CONF_PORTA_EVCTRL_EVACT_0 0 -#endif - -// </h> -// <h> PORT Input Event 0 configuration on PORT B - -// <q> PORTB Input Event 0 Enable -// <i> The event action will be triggered on any incoming event if PORT B Input Event 0 configuration is enabled -// <id> portb_input_event_enable_0 -#ifndef CONF_PORTB_EVCTRL_PORTEI_0 -#define CONF_PORTB_EVCTRL_PORTEI_0 0x0 -#endif - -// <o> PORTB Event 0 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port B on which the event action will be performed -// <id> portb_event_pin_identifier_0 -#ifndef CONF_PORTB_EVCTRL_PID_0 -#define CONF_PORTB_EVCTRL_PID_0 0x0 -#endif - -// <o> PORTB Event 0 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT B will perform on event input 0 -// <id> portb_event_action_0 -#ifndef CONF_PORTB_EVCTRL_EVACT_0 -#define CONF_PORTB_EVCTRL_EVACT_0 0 -#endif - -// </h> - -// </e> - -// <e> PORT Input Event 1 configuration -// <id> enable_port_input_event_1 -#ifndef CONF_PORT_EVCTRL_PORT_1 -#define CONF_PORT_EVCTRL_PORT_1 0 -#endif - -// <h> PORT Input Event 1 configuration on PORT A - -// <q> PORTA Input Event 1 Enable -// <i> The event action will be triggered on any incoming event if PORT A Input Event 1 configuration is enabled -// <id> porta_input_event_enable_1 -#ifndef CONF_PORTA_EVCTRL_PORTEI_1 -#define CONF_PORTA_EVCTRL_PORTEI_1 0x0 -#endif - -// <o> PORTA Event 1 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port A on which the event action will be performed -// <id> porta_event_pin_identifier_1 -#ifndef CONF_PORTA_EVCTRL_PID_1 -#define CONF_PORTA_EVCTRL_PID_1 0x0 -#endif - -// <o> PORTA Event 1 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT A will perform on event input 1 -// <id> porta_event_action_1 -#ifndef CONF_PORTA_EVCTRL_EVACT_1 -#define CONF_PORTA_EVCTRL_EVACT_1 0 -#endif - -// </h> -// <h> PORT Input Event 1 configuration on PORT B - -// <q> PORTB Input Event 1 Enable -// <i> The event action will be triggered on any incoming event if PORT B Input Event 1 configuration is enabled -// <id> portb_input_event_enable_1 -#ifndef CONF_PORTB_EVCTRL_PORTEI_1 -#define CONF_PORTB_EVCTRL_PORTEI_1 0x0 -#endif - -// <o> PORTB Event 1 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port B on which the event action will be performed -// <id> portb_event_pin_identifier_1 -#ifndef CONF_PORTB_EVCTRL_PID_1 -#define CONF_PORTB_EVCTRL_PID_1 0x0 -#endif - -// <o> PORTB Event 1 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT B will perform on event input 1 -// <id> portb_event_action_1 -#ifndef CONF_PORTB_EVCTRL_EVACT_1 -#define CONF_PORTB_EVCTRL_EVACT_1 0 -#endif - -// </h> - -// </e> - -// <e> PORT Input Event 2 configuration -// <id> enable_port_input_event_2 -#ifndef CONF_PORT_EVCTRL_PORT_2 -#define CONF_PORT_EVCTRL_PORT_2 0 -#endif - -// <h> PORT Input Event 2 configuration on PORT A - -// <q> PORTA Input Event 2 Enable -// <i> The event action will be triggered on any incoming event if PORT A Input Event 2 configuration is enabled -// <id> porta_input_event_enable_2 -#ifndef CONF_PORTA_EVCTRL_PORTEI_2 -#define CONF_PORTA_EVCTRL_PORTEI_2 0x0 -#endif - -// <o> PORTA Event 2 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port A on which the event action will be performed -// <id> porta_event_pin_identifier_2 -#ifndef CONF_PORTA_EVCTRL_PID_2 -#define CONF_PORTA_EVCTRL_PID_2 0x0 -#endif - -// <o> PORTA Event 2 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT A will perform on event input 2 -// <id> porta_event_action_2 -#ifndef CONF_PORTA_EVCTRL_EVACT_2 -#define CONF_PORTA_EVCTRL_EVACT_2 0 -#endif - -// </h> -// <h> PORT Input Event 2 configuration on PORT B - -// <q> PORTB Input Event 2 Enable -// <i> The event action will be triggered on any incoming event if PORT B Input Event 2 configuration is enabled -// <id> portb_input_event_enable_2 -#ifndef CONF_PORTB_EVCTRL_PORTEI_2 -#define CONF_PORTB_EVCTRL_PORTEI_2 0x0 -#endif - -// <o> PORTB Event 2 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port B on which the event action will be performed -// <id> portb_event_pin_identifier_2 -#ifndef CONF_PORTB_EVCTRL_PID_2 -#define CONF_PORTB_EVCTRL_PID_2 0x0 -#endif - -// <o> PORTB Event 2 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT B will perform on event input 2 -// <id> portb_event_action_2 -#ifndef CONF_PORTB_EVCTRL_EVACT_2 -#define CONF_PORTB_EVCTRL_EVACT_2 0 -#endif - -// </h> - -// </e> - -// <e> PORT Input Event 3 configuration -// <id> enable_port_input_event_3 -#ifndef CONF_PORT_EVCTRL_PORT_3 -#define CONF_PORT_EVCTRL_PORT_3 0 -#endif - -// <h> PORT Input Event 3 configuration on PORT A - -// <q> PORTA Input Event 3 Enable -// <i> The event action will be triggered on any incoming event if PORT A Input Event 3 configuration is enabled -// <id> porta_input_event_enable_3 -#ifndef CONF_PORTA_EVCTRL_PORTEI_3 -#define CONF_PORTA_EVCTRL_PORTEI_3 0x0 -#endif - -// <o> PORTA Event 3 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port A on which the event action will be performed -// <id> porta_event_pin_identifier_3 -#ifndef CONF_PORTA_EVCTRL_PID_3 -#define CONF_PORTA_EVCTRL_PID_3 0x0 -#endif - -// <o> PORTA Event 3 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT A will perform on event input 3 -// <id> porta_event_action_3 -#ifndef CONF_PORTA_EVCTRL_EVACT_3 -#define CONF_PORTA_EVCTRL_EVACT_3 0 -#endif - -// </h> -// <h> PORT Input Event 3 configuration on PORT B - -// <q> PORTB Input Event 3 Enable -// <i> The event action will be triggered on any incoming event if PORT B Input Event 3 configuration is enabled -// <id> portb_input_event_enable_3 -#ifndef CONF_PORTB_EVCTRL_PORTEI_3 -#define CONF_PORTB_EVCTRL_PORTEI_3 0x0 -#endif - -// <o> PORTB Event 3 Pin Identifier <0x00-0x1F> -// <i> These bits define the I/O pin from port B on which the event action will be performed -// <id> portb_event_pin_identifier_3 -#ifndef CONF_PORTB_EVCTRL_PID_3 -#define CONF_PORTB_EVCTRL_PID_3 0x0 -#endif - -// <o> PORTB Event 3 Action -// <0=> Output register of pin will be set to level of event -// <1=> Set output register of pin on event -// <2=> Clear output register of pin on event -// <3=> Toggle output register of pin on event -// <i> These bits define the event action the PORT B will perform on event input 3 -// <id> portb_event_action_3 -#ifndef CONF_PORTB_EVCTRL_EVACT_3 -#define CONF_PORTB_EVCTRL_EVACT_3 0 -#endif - -// </h> - -// </e> - -#define CONF_PORTA_EVCTRL \ - (0 | PORT_EVCTRL_EVACT0(CONF_PORTA_EVCTRL_EVACT_0) | CONF_PORTA_EVCTRL_PORTEI_0 << PORT_EVCTRL_PORTEI0_Pos \ - | PORT_EVCTRL_PID0(CONF_PORTA_EVCTRL_PID_0) | PORT_EVCTRL_EVACT1(CONF_PORTA_EVCTRL_EVACT_1) \ - | CONF_PORTA_EVCTRL_PORTEI_1 << PORT_EVCTRL_PORTEI1_Pos | PORT_EVCTRL_PID1(CONF_PORTA_EVCTRL_PID_1) \ - | PORT_EVCTRL_EVACT2(CONF_PORTA_EVCTRL_EVACT_2) | CONF_PORTA_EVCTRL_PORTEI_2 << PORT_EVCTRL_PORTEI2_Pos \ - | PORT_EVCTRL_PID2(CONF_PORTA_EVCTRL_PID_2) | PORT_EVCTRL_EVACT3(CONF_PORTA_EVCTRL_EVACT_3) \ - | CONF_PORTA_EVCTRL_PORTEI_3 << PORT_EVCTRL_PORTEI3_Pos | PORT_EVCTRL_PID3(CONF_PORTA_EVCTRL_PID_3)) -#define CONF_PORTB_EVCTRL \ - (0 | PORT_EVCTRL_EVACT0(CONF_PORTB_EVCTRL_EVACT_0) | CONF_PORTB_EVCTRL_PORTEI_0 << PORT_EVCTRL_PORTEI0_Pos \ - | PORT_EVCTRL_PID0(CONF_PORTB_EVCTRL_PID_0) | PORT_EVCTRL_EVACT1(CONF_PORTB_EVCTRL_EVACT_1) \ - | CONF_PORTB_EVCTRL_PORTEI_1 << PORT_EVCTRL_PORTEI1_Pos | PORT_EVCTRL_PID1(CONF_PORTB_EVCTRL_PID_1) \ - | PORT_EVCTRL_EVACT2(CONF_PORTB_EVCTRL_EVACT_2) | CONF_PORTB_EVCTRL_PORTEI_2 << PORT_EVCTRL_PORTEI2_Pos \ - | PORT_EVCTRL_PID2(CONF_PORTB_EVCTRL_PID_2) | PORT_EVCTRL_EVACT3(CONF_PORTB_EVCTRL_EVACT_3) \ - | CONF_PORTB_EVCTRL_PORTEI_3 << PORT_EVCTRL_PORTEI3_Pos | PORT_EVCTRL_PID3(CONF_PORTB_EVCTRL_PID_3)) - -// <<< end of configuration section >>> - -#endif // HPL_PORT_CONFIG_H |