diff options
Diffstat (limited to 'Sensor Watch Starter Project/include/component/usb.h')
| -rw-r--r--[-rwxr-xr-x] | Sensor Watch Starter Project/include/component/usb.h | 1992 |
1 files changed, 1001 insertions, 991 deletions
diff --git a/Sensor Watch Starter Project/include/component/usb.h b/Sensor Watch Starter Project/include/component/usb.h index 1a920242..315256cd 100755..100644 --- a/Sensor Watch Starter Project/include/component/usb.h +++ b/Sensor Watch Starter Project/include/component/usb.h @@ -1,991 +1,1001 @@ -/**
- * \file
- *
- * \brief Component description for USB
- *
- * Copyright (c) 2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _SAML22_USB_COMPONENT_
-#define _SAML22_USB_COMPONENT_
-
-/* ========================================================================== */
-/** SOFTWARE API DEFINITION FOR USB */
-/* ========================================================================== */
-/** \addtogroup SAML22_USB Universal Serial Bus */
-/*@{*/
-
-#define USB_U2222
-#define REV_USB 0x111
-
-/* -------- USB_CTRLA : (USB Offset: 0x000) (R/W 8) Control A -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t SWRST:1; /*!< bit: 0 Software Reset */
- uint8_t ENABLE:1; /*!< bit: 1 Enable */
- uint8_t RUNSTDBY:1; /*!< bit: 2 Run in Standby Mode */
- uint8_t :4; /*!< bit: 3.. 6 Reserved */
- uint8_t MODE:1; /*!< bit: 7 Operating Mode */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_CTRLA_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_CTRLA_OFFSET 0x000 /**< \brief (USB_CTRLA offset) Control A */
-#define USB_CTRLA_RESETVALUE 0x00ul /**< \brief (USB_CTRLA reset_value) Control A */
-
-#define USB_CTRLA_SWRST_Pos 0 /**< \brief (USB_CTRLA) Software Reset */
-#define USB_CTRLA_SWRST (0x1ul << USB_CTRLA_SWRST_Pos)
-#define USB_CTRLA_ENABLE_Pos 1 /**< \brief (USB_CTRLA) Enable */
-#define USB_CTRLA_ENABLE (0x1ul << USB_CTRLA_ENABLE_Pos)
-#define USB_CTRLA_RUNSTDBY_Pos 2 /**< \brief (USB_CTRLA) Run in Standby Mode */
-#define USB_CTRLA_RUNSTDBY (0x1ul << USB_CTRLA_RUNSTDBY_Pos)
-#define USB_CTRLA_MODE_Pos 7 /**< \brief (USB_CTRLA) Operating Mode */
-#define USB_CTRLA_MODE (0x1ul << USB_CTRLA_MODE_Pos)
-#define USB_CTRLA_MODE_DEVICE_Val 0x0ul /**< \brief (USB_CTRLA) Device Mode */
-#define USB_CTRLA_MODE_DEVICE (USB_CTRLA_MODE_DEVICE_Val << USB_CTRLA_MODE_Pos)
-#define USB_CTRLA_MASK 0x87ul /**< \brief (USB_CTRLA) MASK Register */
-
-/* -------- USB_SYNCBUSY : (USB Offset: 0x002) (R/ 8) Synchronization Busy -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t SWRST:1; /*!< bit: 0 Software Reset Synchronization Busy */
- uint8_t ENABLE:1; /*!< bit: 1 Enable Synchronization Busy */
- uint8_t :6; /*!< bit: 2.. 7 Reserved */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_SYNCBUSY_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_SYNCBUSY_OFFSET 0x002 /**< \brief (USB_SYNCBUSY offset) Synchronization Busy */
-#define USB_SYNCBUSY_RESETVALUE 0x00ul /**< \brief (USB_SYNCBUSY reset_value) Synchronization Busy */
-
-#define USB_SYNCBUSY_SWRST_Pos 0 /**< \brief (USB_SYNCBUSY) Software Reset Synchronization Busy */
-#define USB_SYNCBUSY_SWRST (0x1ul << USB_SYNCBUSY_SWRST_Pos)
-#define USB_SYNCBUSY_ENABLE_Pos 1 /**< \brief (USB_SYNCBUSY) Enable Synchronization Busy */
-#define USB_SYNCBUSY_ENABLE (0x1ul << USB_SYNCBUSY_ENABLE_Pos)
-#define USB_SYNCBUSY_MASK 0x03ul /**< \brief (USB_SYNCBUSY) MASK Register */
-
-/* -------- USB_DEVICE_CTRLB : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE Control B -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t DETACH:1; /*!< bit: 0 Detach */
- uint16_t UPRSM:1; /*!< bit: 1 Upstream Resume */
- uint16_t SPDCONF:2; /*!< bit: 2.. 3 Speed Configuration */
- uint16_t NREPLY:1; /*!< bit: 4 No Reply */
- uint16_t TSTJ:1; /*!< bit: 5 Test mode J */
- uint16_t TSTK:1; /*!< bit: 6 Test mode K */
- uint16_t TSTPCKT:1; /*!< bit: 7 Test packet mode */
- uint16_t OPMODE2:1; /*!< bit: 8 Specific Operational Mode */
- uint16_t GNAK:1; /*!< bit: 9 Global NAK */
- uint16_t LPMHDSK:2; /*!< bit: 10..11 Link Power Management Handshake */
- uint16_t :4; /*!< bit: 12..15 Reserved */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_CTRLB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_CTRLB_OFFSET 0x008 /**< \brief (USB_DEVICE_CTRLB offset) DEVICE Control B */
-#define USB_DEVICE_CTRLB_RESETVALUE 0x0001ul /**< \brief (USB_DEVICE_CTRLB reset_value) DEVICE Control B */
-
-#define USB_DEVICE_CTRLB_DETACH_Pos 0 /**< \brief (USB_DEVICE_CTRLB) Detach */
-#define USB_DEVICE_CTRLB_DETACH (0x1ul << USB_DEVICE_CTRLB_DETACH_Pos)
-#define USB_DEVICE_CTRLB_UPRSM_Pos 1 /**< \brief (USB_DEVICE_CTRLB) Upstream Resume */
-#define USB_DEVICE_CTRLB_UPRSM (0x1ul << USB_DEVICE_CTRLB_UPRSM_Pos)
-#define USB_DEVICE_CTRLB_SPDCONF_Pos 2 /**< \brief (USB_DEVICE_CTRLB) Speed Configuration */
-#define USB_DEVICE_CTRLB_SPDCONF_Msk (0x3ul << USB_DEVICE_CTRLB_SPDCONF_Pos)
-#define USB_DEVICE_CTRLB_SPDCONF(value) (USB_DEVICE_CTRLB_SPDCONF_Msk & ((value) << USB_DEVICE_CTRLB_SPDCONF_Pos))
-#define USB_DEVICE_CTRLB_SPDCONF_FS_Val 0x0ul /**< \brief (USB_DEVICE_CTRLB) FS : Full Speed */
-#define USB_DEVICE_CTRLB_SPDCONF_LS_Val 0x1ul /**< \brief (USB_DEVICE_CTRLB) LS : Low Speed */
-#define USB_DEVICE_CTRLB_SPDCONF_HS_Val 0x2ul /**< \brief (USB_DEVICE_CTRLB) HS : High Speed capable */
-#define USB_DEVICE_CTRLB_SPDCONF_HSTM_Val 0x3ul /**< \brief (USB_DEVICE_CTRLB) HSTM: High Speed Test Mode (force high-speed mode for test mode) */
-#define USB_DEVICE_CTRLB_SPDCONF_FS (USB_DEVICE_CTRLB_SPDCONF_FS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
-#define USB_DEVICE_CTRLB_SPDCONF_LS (USB_DEVICE_CTRLB_SPDCONF_LS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
-#define USB_DEVICE_CTRLB_SPDCONF_HS (USB_DEVICE_CTRLB_SPDCONF_HS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
-#define USB_DEVICE_CTRLB_SPDCONF_HSTM (USB_DEVICE_CTRLB_SPDCONF_HSTM_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
-#define USB_DEVICE_CTRLB_NREPLY_Pos 4 /**< \brief (USB_DEVICE_CTRLB) No Reply */
-#define USB_DEVICE_CTRLB_NREPLY (0x1ul << USB_DEVICE_CTRLB_NREPLY_Pos)
-#define USB_DEVICE_CTRLB_TSTJ_Pos 5 /**< \brief (USB_DEVICE_CTRLB) Test mode J */
-#define USB_DEVICE_CTRLB_TSTJ (0x1ul << USB_DEVICE_CTRLB_TSTJ_Pos)
-#define USB_DEVICE_CTRLB_TSTK_Pos 6 /**< \brief (USB_DEVICE_CTRLB) Test mode K */
-#define USB_DEVICE_CTRLB_TSTK (0x1ul << USB_DEVICE_CTRLB_TSTK_Pos)
-#define USB_DEVICE_CTRLB_TSTPCKT_Pos 7 /**< \brief (USB_DEVICE_CTRLB) Test packet mode */
-#define USB_DEVICE_CTRLB_TSTPCKT (0x1ul << USB_DEVICE_CTRLB_TSTPCKT_Pos)
-#define USB_DEVICE_CTRLB_OPMODE2_Pos 8 /**< \brief (USB_DEVICE_CTRLB) Specific Operational Mode */
-#define USB_DEVICE_CTRLB_OPMODE2 (0x1ul << USB_DEVICE_CTRLB_OPMODE2_Pos)
-#define USB_DEVICE_CTRLB_GNAK_Pos 9 /**< \brief (USB_DEVICE_CTRLB) Global NAK */
-#define USB_DEVICE_CTRLB_GNAK (0x1ul << USB_DEVICE_CTRLB_GNAK_Pos)
-#define USB_DEVICE_CTRLB_LPMHDSK_Pos 10 /**< \brief (USB_DEVICE_CTRLB) Link Power Management Handshake */
-#define USB_DEVICE_CTRLB_LPMHDSK_Msk (0x3ul << USB_DEVICE_CTRLB_LPMHDSK_Pos)
-#define USB_DEVICE_CTRLB_LPMHDSK(value) (USB_DEVICE_CTRLB_LPMHDSK_Msk & ((value) << USB_DEVICE_CTRLB_LPMHDSK_Pos))
-#define USB_DEVICE_CTRLB_LPMHDSK_NO_Val 0x0ul /**< \brief (USB_DEVICE_CTRLB) No handshake. LPM is not supported */
-#define USB_DEVICE_CTRLB_LPMHDSK_ACK_Val 0x1ul /**< \brief (USB_DEVICE_CTRLB) ACK */
-#define USB_DEVICE_CTRLB_LPMHDSK_NYET_Val 0x2ul /**< \brief (USB_DEVICE_CTRLB) NYET */
-#define USB_DEVICE_CTRLB_LPMHDSK_STALL_Val 0x3ul /**< \brief (USB_DEVICE_CTRLB) STALL */
-#define USB_DEVICE_CTRLB_LPMHDSK_NO (USB_DEVICE_CTRLB_LPMHDSK_NO_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
-#define USB_DEVICE_CTRLB_LPMHDSK_ACK (USB_DEVICE_CTRLB_LPMHDSK_ACK_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
-#define USB_DEVICE_CTRLB_LPMHDSK_NYET (USB_DEVICE_CTRLB_LPMHDSK_NYET_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
-#define USB_DEVICE_CTRLB_LPMHDSK_STALL (USB_DEVICE_CTRLB_LPMHDSK_STALL_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
-#define USB_DEVICE_CTRLB_MASK 0x0FFFul /**< \brief (USB_DEVICE_CTRLB) MASK Register */
-
-/* -------- USB_DEVICE_DADD : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE Device Address -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t DADD:7; /*!< bit: 0.. 6 Device Address */
- uint8_t ADDEN:1; /*!< bit: 7 Device Address Enable */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_DADD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_DADD_OFFSET 0x00A /**< \brief (USB_DEVICE_DADD offset) DEVICE Device Address */
-#define USB_DEVICE_DADD_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_DADD reset_value) DEVICE Device Address */
-
-#define USB_DEVICE_DADD_DADD_Pos 0 /**< \brief (USB_DEVICE_DADD) Device Address */
-#define USB_DEVICE_DADD_DADD_Msk (0x7Ful << USB_DEVICE_DADD_DADD_Pos)
-#define USB_DEVICE_DADD_DADD(value) (USB_DEVICE_DADD_DADD_Msk & ((value) << USB_DEVICE_DADD_DADD_Pos))
-#define USB_DEVICE_DADD_ADDEN_Pos 7 /**< \brief (USB_DEVICE_DADD) Device Address Enable */
-#define USB_DEVICE_DADD_ADDEN (0x1ul << USB_DEVICE_DADD_ADDEN_Pos)
-#define USB_DEVICE_DADD_MASK 0xFFul /**< \brief (USB_DEVICE_DADD) MASK Register */
-
-/* -------- USB_DEVICE_STATUS : (USB Offset: 0x00C) (R/ 8) DEVICE DEVICE Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t :2; /*!< bit: 0.. 1 Reserved */
- uint8_t SPEED:2; /*!< bit: 2.. 3 Speed Status */
- uint8_t :2; /*!< bit: 4.. 5 Reserved */
- uint8_t LINESTATE:2; /*!< bit: 6.. 7 USB Line State Status */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_STATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_STATUS_OFFSET 0x00C /**< \brief (USB_DEVICE_STATUS offset) DEVICE Status */
-#define USB_DEVICE_STATUS_RESETVALUE 0x40ul /**< \brief (USB_DEVICE_STATUS reset_value) DEVICE Status */
-
-#define USB_DEVICE_STATUS_SPEED_Pos 2 /**< \brief (USB_DEVICE_STATUS) Speed Status */
-#define USB_DEVICE_STATUS_SPEED_Msk (0x3ul << USB_DEVICE_STATUS_SPEED_Pos)
-#define USB_DEVICE_STATUS_SPEED(value) (USB_DEVICE_STATUS_SPEED_Msk & ((value) << USB_DEVICE_STATUS_SPEED_Pos))
-#define USB_DEVICE_STATUS_SPEED_FS_Val 0x0ul /**< \brief (USB_DEVICE_STATUS) Full-speed mode */
-#define USB_DEVICE_STATUS_SPEED_HS_Val 0x1ul /**< \brief (USB_DEVICE_STATUS) High-speed mode */
-#define USB_DEVICE_STATUS_SPEED_LS_Val 0x2ul /**< \brief (USB_DEVICE_STATUS) Low-speed mode */
-#define USB_DEVICE_STATUS_SPEED_FS (USB_DEVICE_STATUS_SPEED_FS_Val << USB_DEVICE_STATUS_SPEED_Pos)
-#define USB_DEVICE_STATUS_SPEED_HS (USB_DEVICE_STATUS_SPEED_HS_Val << USB_DEVICE_STATUS_SPEED_Pos)
-#define USB_DEVICE_STATUS_SPEED_LS (USB_DEVICE_STATUS_SPEED_LS_Val << USB_DEVICE_STATUS_SPEED_Pos)
-#define USB_DEVICE_STATUS_LINESTATE_Pos 6 /**< \brief (USB_DEVICE_STATUS) USB Line State Status */
-#define USB_DEVICE_STATUS_LINESTATE_Msk (0x3ul << USB_DEVICE_STATUS_LINESTATE_Pos)
-#define USB_DEVICE_STATUS_LINESTATE(value) (USB_DEVICE_STATUS_LINESTATE_Msk & ((value) << USB_DEVICE_STATUS_LINESTATE_Pos))
-#define USB_DEVICE_STATUS_LINESTATE_0_Val 0x0ul /**< \brief (USB_DEVICE_STATUS) SE0/RESET */
-#define USB_DEVICE_STATUS_LINESTATE_1_Val 0x1ul /**< \brief (USB_DEVICE_STATUS) FS-J or LS-K State */
-#define USB_DEVICE_STATUS_LINESTATE_2_Val 0x2ul /**< \brief (USB_DEVICE_STATUS) FS-K or LS-J State */
-#define USB_DEVICE_STATUS_LINESTATE_0 (USB_DEVICE_STATUS_LINESTATE_0_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
-#define USB_DEVICE_STATUS_LINESTATE_1 (USB_DEVICE_STATUS_LINESTATE_1_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
-#define USB_DEVICE_STATUS_LINESTATE_2 (USB_DEVICE_STATUS_LINESTATE_2_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
-#define USB_DEVICE_STATUS_MASK 0xCCul /**< \brief (USB_DEVICE_STATUS) MASK Register */
-
-/* -------- USB_FSMSTATUS : (USB Offset: 0x00D) (R/ 8) Finite State Machine Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t FSMSTATE:6; /*!< bit: 0.. 5 Fine State Machine Status */
- uint8_t :2; /*!< bit: 6.. 7 Reserved */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_FSMSTATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_FSMSTATUS_OFFSET 0x00D /**< \brief (USB_FSMSTATUS offset) Finite State Machine Status */
-#define USB_FSMSTATUS_RESETVALUE 0x01ul /**< \brief (USB_FSMSTATUS reset_value) Finite State Machine Status */
-
-#define USB_FSMSTATUS_FSMSTATE_Pos 0 /**< \brief (USB_FSMSTATUS) Fine State Machine Status */
-#define USB_FSMSTATUS_FSMSTATE_Msk (0x3Ful << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE(value) (USB_FSMSTATUS_FSMSTATE_Msk & ((value) << USB_FSMSTATUS_FSMSTATE_Pos))
-#define USB_FSMSTATUS_FSMSTATE_OFF_Val 0x1ul /**< \brief (USB_FSMSTATUS) OFF (L3). It corresponds to the powered-off, disconnected, and disabled state */
-#define USB_FSMSTATUS_FSMSTATE_ON_Val 0x2ul /**< \brief (USB_FSMSTATUS) ON (L0). It corresponds to the Idle and Active states */
-#define USB_FSMSTATUS_FSMSTATE_SUSPEND_Val 0x4ul /**< \brief (USB_FSMSTATUS) SUSPEND (L2) */
-#define USB_FSMSTATUS_FSMSTATE_SLEEP_Val 0x8ul /**< \brief (USB_FSMSTATUS) SLEEP (L1) */
-#define USB_FSMSTATUS_FSMSTATE_DNRESUME_Val 0x10ul /**< \brief (USB_FSMSTATUS) DNRESUME. Down Stream Resume. */
-#define USB_FSMSTATUS_FSMSTATE_UPRESUME_Val 0x20ul /**< \brief (USB_FSMSTATUS) UPRESUME. Up Stream Resume. */
-#define USB_FSMSTATUS_FSMSTATE_RESET_Val 0x40ul /**< \brief (USB_FSMSTATUS) RESET. USB lines Reset. */
-#define USB_FSMSTATUS_FSMSTATE_OFF (USB_FSMSTATUS_FSMSTATE_OFF_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE_ON (USB_FSMSTATUS_FSMSTATE_ON_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE_SUSPEND (USB_FSMSTATUS_FSMSTATE_SUSPEND_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE_SLEEP (USB_FSMSTATUS_FSMSTATE_SLEEP_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE_DNRESUME (USB_FSMSTATUS_FSMSTATE_DNRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE_UPRESUME (USB_FSMSTATUS_FSMSTATE_UPRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_FSMSTATE_RESET (USB_FSMSTATUS_FSMSTATE_RESET_Val << USB_FSMSTATUS_FSMSTATE_Pos)
-#define USB_FSMSTATUS_MASK 0x3Ful /**< \brief (USB_FSMSTATUS) MASK Register */
-
-/* -------- USB_DEVICE_FNUM : (USB Offset: 0x010) (R/ 16) DEVICE DEVICE Device Frame Number -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t MFNUM:3; /*!< bit: 0.. 2 Micro Frame Number */
- uint16_t FNUM:11; /*!< bit: 3..13 Frame Number */
- uint16_t :1; /*!< bit: 14 Reserved */
- uint16_t FNCERR:1; /*!< bit: 15 Frame Number CRC Error */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_FNUM_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_FNUM_OFFSET 0x010 /**< \brief (USB_DEVICE_FNUM offset) DEVICE Device Frame Number */
-#define USB_DEVICE_FNUM_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_FNUM reset_value) DEVICE Device Frame Number */
-
-#define USB_DEVICE_FNUM_MFNUM_Pos 0 /**< \brief (USB_DEVICE_FNUM) Micro Frame Number */
-#define USB_DEVICE_FNUM_MFNUM_Msk (0x7ul << USB_DEVICE_FNUM_MFNUM_Pos)
-#define USB_DEVICE_FNUM_MFNUM(value) (USB_DEVICE_FNUM_MFNUM_Msk & ((value) << USB_DEVICE_FNUM_MFNUM_Pos))
-#define USB_DEVICE_FNUM_FNUM_Pos 3 /**< \brief (USB_DEVICE_FNUM) Frame Number */
-#define USB_DEVICE_FNUM_FNUM_Msk (0x7FFul << USB_DEVICE_FNUM_FNUM_Pos)
-#define USB_DEVICE_FNUM_FNUM(value) (USB_DEVICE_FNUM_FNUM_Msk & ((value) << USB_DEVICE_FNUM_FNUM_Pos))
-#define USB_DEVICE_FNUM_FNCERR_Pos 15 /**< \brief (USB_DEVICE_FNUM) Frame Number CRC Error */
-#define USB_DEVICE_FNUM_FNCERR (0x1ul << USB_DEVICE_FNUM_FNCERR_Pos)
-#define USB_DEVICE_FNUM_MASK 0xBFFFul /**< \brief (USB_DEVICE_FNUM) MASK Register */
-
-/* -------- USB_DEVICE_INTENCLR : (USB Offset: 0x014) (R/W 16) DEVICE DEVICE Device Interrupt Enable Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */
- uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */
- uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */
- uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */
- uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
- uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */
- uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */
- uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
- uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */
- uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */
- uint16_t :6; /*!< bit: 10..15 Reserved */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_INTENCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_INTENCLR_OFFSET 0x014 /**< \brief (USB_DEVICE_INTENCLR offset) DEVICE Device Interrupt Enable Clear */
-#define USB_DEVICE_INTENCLR_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_INTENCLR reset_value) DEVICE Device Interrupt Enable Clear */
-
-#define USB_DEVICE_INTENCLR_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENCLR) Suspend Interrupt Enable */
-#define USB_DEVICE_INTENCLR_SUSPEND (0x1ul << USB_DEVICE_INTENCLR_SUSPEND_Pos)
-#define USB_DEVICE_INTENCLR_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENCLR) Micro Start of Frame Interrupt Enable in High Speed Mode */
-#define USB_DEVICE_INTENCLR_MSOF (0x1ul << USB_DEVICE_INTENCLR_MSOF_Pos)
-#define USB_DEVICE_INTENCLR_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENCLR) Start Of Frame Interrupt Enable */
-#define USB_DEVICE_INTENCLR_SOF (0x1ul << USB_DEVICE_INTENCLR_SOF_Pos)
-#define USB_DEVICE_INTENCLR_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENCLR) End of Reset Interrupt Enable */
-#define USB_DEVICE_INTENCLR_EORST (0x1ul << USB_DEVICE_INTENCLR_EORST_Pos)
-#define USB_DEVICE_INTENCLR_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENCLR) Wake Up Interrupt Enable */
-#define USB_DEVICE_INTENCLR_WAKEUP (0x1ul << USB_DEVICE_INTENCLR_WAKEUP_Pos)
-#define USB_DEVICE_INTENCLR_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENCLR) End Of Resume Interrupt Enable */
-#define USB_DEVICE_INTENCLR_EORSM (0x1ul << USB_DEVICE_INTENCLR_EORSM_Pos)
-#define USB_DEVICE_INTENCLR_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENCLR) Upstream Resume Interrupt Enable */
-#define USB_DEVICE_INTENCLR_UPRSM (0x1ul << USB_DEVICE_INTENCLR_UPRSM_Pos)
-#define USB_DEVICE_INTENCLR_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENCLR) Ram Access Interrupt Enable */
-#define USB_DEVICE_INTENCLR_RAMACER (0x1ul << USB_DEVICE_INTENCLR_RAMACER_Pos)
-#define USB_DEVICE_INTENCLR_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Not Yet Interrupt Enable */
-#define USB_DEVICE_INTENCLR_LPMNYET (0x1ul << USB_DEVICE_INTENCLR_LPMNYET_Pos)
-#define USB_DEVICE_INTENCLR_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Suspend Interrupt Enable */
-#define USB_DEVICE_INTENCLR_LPMSUSP (0x1ul << USB_DEVICE_INTENCLR_LPMSUSP_Pos)
-#define USB_DEVICE_INTENCLR_MASK 0x03FFul /**< \brief (USB_DEVICE_INTENCLR) MASK Register */
-
-/* -------- USB_DEVICE_INTENSET : (USB Offset: 0x018) (R/W 16) DEVICE DEVICE Device Interrupt Enable Set -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */
- uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */
- uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */
- uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */
- uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
- uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */
- uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */
- uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
- uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */
- uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */
- uint16_t :6; /*!< bit: 10..15 Reserved */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_INTENSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_INTENSET_OFFSET 0x018 /**< \brief (USB_DEVICE_INTENSET offset) DEVICE Device Interrupt Enable Set */
-#define USB_DEVICE_INTENSET_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_INTENSET reset_value) DEVICE Device Interrupt Enable Set */
-
-#define USB_DEVICE_INTENSET_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENSET) Suspend Interrupt Enable */
-#define USB_DEVICE_INTENSET_SUSPEND (0x1ul << USB_DEVICE_INTENSET_SUSPEND_Pos)
-#define USB_DEVICE_INTENSET_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENSET) Micro Start of Frame Interrupt Enable in High Speed Mode */
-#define USB_DEVICE_INTENSET_MSOF (0x1ul << USB_DEVICE_INTENSET_MSOF_Pos)
-#define USB_DEVICE_INTENSET_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENSET) Start Of Frame Interrupt Enable */
-#define USB_DEVICE_INTENSET_SOF (0x1ul << USB_DEVICE_INTENSET_SOF_Pos)
-#define USB_DEVICE_INTENSET_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENSET) End of Reset Interrupt Enable */
-#define USB_DEVICE_INTENSET_EORST (0x1ul << USB_DEVICE_INTENSET_EORST_Pos)
-#define USB_DEVICE_INTENSET_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENSET) Wake Up Interrupt Enable */
-#define USB_DEVICE_INTENSET_WAKEUP (0x1ul << USB_DEVICE_INTENSET_WAKEUP_Pos)
-#define USB_DEVICE_INTENSET_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENSET) End Of Resume Interrupt Enable */
-#define USB_DEVICE_INTENSET_EORSM (0x1ul << USB_DEVICE_INTENSET_EORSM_Pos)
-#define USB_DEVICE_INTENSET_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENSET) Upstream Resume Interrupt Enable */
-#define USB_DEVICE_INTENSET_UPRSM (0x1ul << USB_DEVICE_INTENSET_UPRSM_Pos)
-#define USB_DEVICE_INTENSET_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENSET) Ram Access Interrupt Enable */
-#define USB_DEVICE_INTENSET_RAMACER (0x1ul << USB_DEVICE_INTENSET_RAMACER_Pos)
-#define USB_DEVICE_INTENSET_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Not Yet Interrupt Enable */
-#define USB_DEVICE_INTENSET_LPMNYET (0x1ul << USB_DEVICE_INTENSET_LPMNYET_Pos)
-#define USB_DEVICE_INTENSET_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Suspend Interrupt Enable */
-#define USB_DEVICE_INTENSET_LPMSUSP (0x1ul << USB_DEVICE_INTENSET_LPMSUSP_Pos)
-#define USB_DEVICE_INTENSET_MASK 0x03FFul /**< \brief (USB_DEVICE_INTENSET) MASK Register */
-
-/* -------- USB_DEVICE_INTFLAG : (USB Offset: 0x01C) (R/W 16) DEVICE DEVICE Device Interrupt Flag -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union { // __I to avoid read-modify-write on write-to-clear register
- struct {
- __I uint16_t SUSPEND:1; /*!< bit: 0 Suspend */
- __I uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame in High Speed Mode */
- __I uint16_t SOF:1; /*!< bit: 2 Start Of Frame */
- __I uint16_t EORST:1; /*!< bit: 3 End of Reset */
- __I uint16_t WAKEUP:1; /*!< bit: 4 Wake Up */
- __I uint16_t EORSM:1; /*!< bit: 5 End Of Resume */
- __I uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume */
- __I uint16_t RAMACER:1; /*!< bit: 7 Ram Access */
- __I uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet */
- __I uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend */
- __I uint16_t :6; /*!< bit: 10..15 Reserved */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_INTFLAG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_INTFLAG_OFFSET 0x01C /**< \brief (USB_DEVICE_INTFLAG offset) DEVICE Device Interrupt Flag */
-#define USB_DEVICE_INTFLAG_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_INTFLAG reset_value) DEVICE Device Interrupt Flag */
-
-#define USB_DEVICE_INTFLAG_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTFLAG) Suspend */
-#define USB_DEVICE_INTFLAG_SUSPEND (0x1ul << USB_DEVICE_INTFLAG_SUSPEND_Pos)
-#define USB_DEVICE_INTFLAG_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTFLAG) Micro Start of Frame in High Speed Mode */
-#define USB_DEVICE_INTFLAG_MSOF (0x1ul << USB_DEVICE_INTFLAG_MSOF_Pos)
-#define USB_DEVICE_INTFLAG_SOF_Pos 2 /**< \brief (USB_DEVICE_INTFLAG) Start Of Frame */
-#define USB_DEVICE_INTFLAG_SOF (0x1ul << USB_DEVICE_INTFLAG_SOF_Pos)
-#define USB_DEVICE_INTFLAG_EORST_Pos 3 /**< \brief (USB_DEVICE_INTFLAG) End of Reset */
-#define USB_DEVICE_INTFLAG_EORST (0x1ul << USB_DEVICE_INTFLAG_EORST_Pos)
-#define USB_DEVICE_INTFLAG_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTFLAG) Wake Up */
-#define USB_DEVICE_INTFLAG_WAKEUP (0x1ul << USB_DEVICE_INTFLAG_WAKEUP_Pos)
-#define USB_DEVICE_INTFLAG_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTFLAG) End Of Resume */
-#define USB_DEVICE_INTFLAG_EORSM (0x1ul << USB_DEVICE_INTFLAG_EORSM_Pos)
-#define USB_DEVICE_INTFLAG_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTFLAG) Upstream Resume */
-#define USB_DEVICE_INTFLAG_UPRSM (0x1ul << USB_DEVICE_INTFLAG_UPRSM_Pos)
-#define USB_DEVICE_INTFLAG_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTFLAG) Ram Access */
-#define USB_DEVICE_INTFLAG_RAMACER (0x1ul << USB_DEVICE_INTFLAG_RAMACER_Pos)
-#define USB_DEVICE_INTFLAG_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Not Yet */
-#define USB_DEVICE_INTFLAG_LPMNYET (0x1ul << USB_DEVICE_INTFLAG_LPMNYET_Pos)
-#define USB_DEVICE_INTFLAG_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Suspend */
-#define USB_DEVICE_INTFLAG_LPMSUSP (0x1ul << USB_DEVICE_INTFLAG_LPMSUSP_Pos)
-#define USB_DEVICE_INTFLAG_MASK 0x03FFul /**< \brief (USB_DEVICE_INTFLAG) MASK Register */
-
-/* -------- USB_DEVICE_EPINTSMRY : (USB Offset: 0x020) (R/ 16) DEVICE DEVICE End Point Interrupt Summary -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t EPINT0:1; /*!< bit: 0 End Point 0 Interrupt */
- uint16_t EPINT1:1; /*!< bit: 1 End Point 1 Interrupt */
- uint16_t EPINT2:1; /*!< bit: 2 End Point 2 Interrupt */
- uint16_t EPINT3:1; /*!< bit: 3 End Point 3 Interrupt */
- uint16_t EPINT4:1; /*!< bit: 4 End Point 4 Interrupt */
- uint16_t EPINT5:1; /*!< bit: 5 End Point 5 Interrupt */
- uint16_t EPINT6:1; /*!< bit: 6 End Point 6 Interrupt */
- uint16_t EPINT7:1; /*!< bit: 7 End Point 7 Interrupt */
- uint16_t :8; /*!< bit: 8..15 Reserved */
- } bit; /*!< Structure used for bit access */
- struct {
- uint16_t EPINT:8; /*!< bit: 0.. 7 End Point x Interrupt */
- uint16_t :8; /*!< bit: 8..15 Reserved */
- } vec; /*!< Structure used for vec access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPINTSMRY_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPINTSMRY_OFFSET 0x020 /**< \brief (USB_DEVICE_EPINTSMRY offset) DEVICE End Point Interrupt Summary */
-#define USB_DEVICE_EPINTSMRY_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_EPINTSMRY reset_value) DEVICE End Point Interrupt Summary */
-
-#define USB_DEVICE_EPINTSMRY_EPINT0_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 0 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT0 (1 << USB_DEVICE_EPINTSMRY_EPINT0_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT1_Pos 1 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 1 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT1 (1 << USB_DEVICE_EPINTSMRY_EPINT1_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT2_Pos 2 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 2 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT2 (1 << USB_DEVICE_EPINTSMRY_EPINT2_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT3_Pos 3 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 3 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT3 (1 << USB_DEVICE_EPINTSMRY_EPINT3_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT4_Pos 4 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 4 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT4 (1 << USB_DEVICE_EPINTSMRY_EPINT4_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT5_Pos 5 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 5 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT5 (1 << USB_DEVICE_EPINTSMRY_EPINT5_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT6_Pos 6 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 6 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT6 (1 << USB_DEVICE_EPINTSMRY_EPINT6_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT7_Pos 7 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 7 Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT7 (1 << USB_DEVICE_EPINTSMRY_EPINT7_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point x Interrupt */
-#define USB_DEVICE_EPINTSMRY_EPINT_Msk (0xFFul << USB_DEVICE_EPINTSMRY_EPINT_Pos)
-#define USB_DEVICE_EPINTSMRY_EPINT(value) (USB_DEVICE_EPINTSMRY_EPINT_Msk & ((value) << USB_DEVICE_EPINTSMRY_EPINT_Pos))
-#define USB_DEVICE_EPINTSMRY_MASK 0x00FFul /**< \brief (USB_DEVICE_EPINTSMRY) MASK Register */
-
-/* -------- USB_DESCADD : (USB Offset: 0x024) (R/W 32) Descriptor Address -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint32_t DESCADD:32; /*!< bit: 0..31 Descriptor Address Value */
- } bit; /*!< Structure used for bit access */
- uint32_t reg; /*!< Type used for register access */
-} USB_DESCADD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DESCADD_OFFSET 0x024 /**< \brief (USB_DESCADD offset) Descriptor Address */
-#define USB_DESCADD_RESETVALUE 0x00000000ul /**< \brief (USB_DESCADD reset_value) Descriptor Address */
-
-#define USB_DESCADD_DESCADD_Pos 0 /**< \brief (USB_DESCADD) Descriptor Address Value */
-#define USB_DESCADD_DESCADD_Msk (0xFFFFFFFFul << USB_DESCADD_DESCADD_Pos)
-#define USB_DESCADD_DESCADD(value) (USB_DESCADD_DESCADD_Msk & ((value) << USB_DESCADD_DESCADD_Pos))
-#define USB_DESCADD_MASK 0xFFFFFFFFul /**< \brief (USB_DESCADD) MASK Register */
-
-/* -------- USB_PADCAL : (USB Offset: 0x028) (R/W 16) USB PAD Calibration -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t TRANSP:5; /*!< bit: 0.. 4 USB Pad Transp calibration */
- uint16_t :1; /*!< bit: 5 Reserved */
- uint16_t TRANSN:5; /*!< bit: 6..10 USB Pad Transn calibration */
- uint16_t :1; /*!< bit: 11 Reserved */
- uint16_t TRIM:3; /*!< bit: 12..14 USB Pad Trim calibration */
- uint16_t :1; /*!< bit: 15 Reserved */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_PADCAL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_PADCAL_OFFSET 0x028 /**< \brief (USB_PADCAL offset) USB PAD Calibration */
-#define USB_PADCAL_RESETVALUE 0x0000ul /**< \brief (USB_PADCAL reset_value) USB PAD Calibration */
-
-#define USB_PADCAL_TRANSP_Pos 0 /**< \brief (USB_PADCAL) USB Pad Transp calibration */
-#define USB_PADCAL_TRANSP_Msk (0x1Ful << USB_PADCAL_TRANSP_Pos)
-#define USB_PADCAL_TRANSP(value) (USB_PADCAL_TRANSP_Msk & ((value) << USB_PADCAL_TRANSP_Pos))
-#define USB_PADCAL_TRANSN_Pos 6 /**< \brief (USB_PADCAL) USB Pad Transn calibration */
-#define USB_PADCAL_TRANSN_Msk (0x1Ful << USB_PADCAL_TRANSN_Pos)
-#define USB_PADCAL_TRANSN(value) (USB_PADCAL_TRANSN_Msk & ((value) << USB_PADCAL_TRANSN_Pos))
-#define USB_PADCAL_TRIM_Pos 12 /**< \brief (USB_PADCAL) USB Pad Trim calibration */
-#define USB_PADCAL_TRIM_Msk (0x7ul << USB_PADCAL_TRIM_Pos)
-#define USB_PADCAL_TRIM(value) (USB_PADCAL_TRIM_Msk & ((value) << USB_PADCAL_TRIM_Pos))
-#define USB_PADCAL_MASK 0x77DFul /**< \brief (USB_PADCAL) MASK Register */
-
-/* -------- USB_DEVICE_EPCFG : (USB Offset: 0x100) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Configuration -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t EPTYPE0:3; /*!< bit: 0.. 2 End Point Type0 */
- uint8_t :1; /*!< bit: 3 Reserved */
- uint8_t EPTYPE1:3; /*!< bit: 4.. 6 End Point Type1 */
- uint8_t NYETDIS:1; /*!< bit: 7 NYET Token Disable */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPCFG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPCFG_OFFSET 0x100 /**< \brief (USB_DEVICE_EPCFG offset) DEVICE_ENDPOINT End Point Configuration */
-#define USB_DEVICE_EPCFG_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPCFG reset_value) DEVICE_ENDPOINT End Point Configuration */
-
-#define USB_DEVICE_EPCFG_EPTYPE0_Pos 0 /**< \brief (USB_DEVICE_EPCFG) End Point Type0 */
-#define USB_DEVICE_EPCFG_EPTYPE0_Msk (0x7ul << USB_DEVICE_EPCFG_EPTYPE0_Pos)
-#define USB_DEVICE_EPCFG_EPTYPE0(value) (USB_DEVICE_EPCFG_EPTYPE0_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE0_Pos))
-#define USB_DEVICE_EPCFG_EPTYPE1_Pos 4 /**< \brief (USB_DEVICE_EPCFG) End Point Type1 */
-#define USB_DEVICE_EPCFG_EPTYPE1_Msk (0x7ul << USB_DEVICE_EPCFG_EPTYPE1_Pos)
-#define USB_DEVICE_EPCFG_EPTYPE1(value) (USB_DEVICE_EPCFG_EPTYPE1_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE1_Pos))
-#define USB_DEVICE_EPCFG_NYETDIS_Pos 7 /**< \brief (USB_DEVICE_EPCFG) NYET Token Disable */
-#define USB_DEVICE_EPCFG_NYETDIS (0x1ul << USB_DEVICE_EPCFG_NYETDIS_Pos)
-#define USB_DEVICE_EPCFG_MASK 0xF7ul /**< \brief (USB_DEVICE_EPCFG) MASK Register */
-
-/* -------- USB_DEVICE_EPSTATUSCLR : (USB Offset: 0x104) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Clear */
- uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Clear */
- uint8_t CURBK:1; /*!< bit: 2 Current Bank Clear */
- uint8_t :1; /*!< bit: 3 Reserved */
- uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Clear */
- uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Clear */
- uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Clear */
- uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Clear */
- } bit; /*!< Structure used for bit access */
- struct {
- uint8_t :4; /*!< bit: 0.. 3 Reserved */
- uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Clear */
- uint8_t :2; /*!< bit: 6.. 7 Reserved */
- } vec; /*!< Structure used for vec access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPSTATUSCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPSTATUSCLR_OFFSET 0x104 /**< \brief (USB_DEVICE_EPSTATUSCLR offset) DEVICE_ENDPOINT End Point Pipe Status Clear */
-#define USB_DEVICE_EPSTATUSCLR_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPSTATUSCLR reset_value) DEVICE_ENDPOINT End Point Pipe Status Clear */
-
-#define USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle OUT Clear */
-#define USB_DEVICE_EPSTATUSCLR_DTGLOUT (0x1ul << USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos)
-#define USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle IN Clear */
-#define USB_DEVICE_EPSTATUSCLR_DTGLIN (0x1ul << USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos)
-#define USB_DEVICE_EPSTATUSCLR_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSCLR) Current Bank Clear */
-#define USB_DEVICE_EPSTATUSCLR_CURBK (0x1ul << USB_DEVICE_EPSTATUSCLR_CURBK_Pos)
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 0 Request Clear */
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ0 (1 << USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos)
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 1 Request Clear */
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ1 (1 << USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos)
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall x Request Clear */
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk (0x3ul << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos)
-#define USB_DEVICE_EPSTATUSCLR_STALLRQ(value) (USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos))
-#define USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 0 Ready Clear */
-#define USB_DEVICE_EPSTATUSCLR_BK0RDY (0x1ul << USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos)
-#define USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 1 Ready Clear */
-#define USB_DEVICE_EPSTATUSCLR_BK1RDY (0x1ul << USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos)
-#define USB_DEVICE_EPSTATUSCLR_MASK 0xF7ul /**< \brief (USB_DEVICE_EPSTATUSCLR) MASK Register */
-
-/* -------- USB_DEVICE_EPSTATUSSET : (USB Offset: 0x105) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Set -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Set */
- uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Set */
- uint8_t CURBK:1; /*!< bit: 2 Current Bank Set */
- uint8_t :1; /*!< bit: 3 Reserved */
- uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Set */
- uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Set */
- uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Set */
- uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Set */
- } bit; /*!< Structure used for bit access */
- struct {
- uint8_t :4; /*!< bit: 0.. 3 Reserved */
- uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Set */
- uint8_t :2; /*!< bit: 6.. 7 Reserved */
- } vec; /*!< Structure used for vec access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPSTATUSSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPSTATUSSET_OFFSET 0x105 /**< \brief (USB_DEVICE_EPSTATUSSET offset) DEVICE_ENDPOINT End Point Pipe Status Set */
-#define USB_DEVICE_EPSTATUSSET_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPSTATUSSET reset_value) DEVICE_ENDPOINT End Point Pipe Status Set */
-
-#define USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle OUT Set */
-#define USB_DEVICE_EPSTATUSSET_DTGLOUT (0x1ul << USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos)
-#define USB_DEVICE_EPSTATUSSET_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle IN Set */
-#define USB_DEVICE_EPSTATUSSET_DTGLIN (0x1ul << USB_DEVICE_EPSTATUSSET_DTGLIN_Pos)
-#define USB_DEVICE_EPSTATUSSET_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSSET) Current Bank Set */
-#define USB_DEVICE_EPSTATUSSET_CURBK (0x1ul << USB_DEVICE_EPSTATUSSET_CURBK_Pos)
-#define USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 0 Request Set */
-#define USB_DEVICE_EPSTATUSSET_STALLRQ0 (1 << USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos)
-#define USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 1 Request Set */
-#define USB_DEVICE_EPSTATUSSET_STALLRQ1 (1 << USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos)
-#define USB_DEVICE_EPSTATUSSET_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall x Request Set */
-#define USB_DEVICE_EPSTATUSSET_STALLRQ_Msk (0x3ul << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos)
-#define USB_DEVICE_EPSTATUSSET_STALLRQ(value) (USB_DEVICE_EPSTATUSSET_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos))
-#define USB_DEVICE_EPSTATUSSET_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 0 Ready Set */
-#define USB_DEVICE_EPSTATUSSET_BK0RDY (0x1ul << USB_DEVICE_EPSTATUSSET_BK0RDY_Pos)
-#define USB_DEVICE_EPSTATUSSET_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 1 Ready Set */
-#define USB_DEVICE_EPSTATUSSET_BK1RDY (0x1ul << USB_DEVICE_EPSTATUSSET_BK1RDY_Pos)
-#define USB_DEVICE_EPSTATUSSET_MASK 0xF7ul /**< \brief (USB_DEVICE_EPSTATUSSET) MASK Register */
-
-/* -------- USB_DEVICE_EPSTATUS : (USB Offset: 0x106) (R/ 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle Out */
- uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle In */
- uint8_t CURBK:1; /*!< bit: 2 Current Bank */
- uint8_t :1; /*!< bit: 3 Reserved */
- uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request */
- uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request */
- uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 ready */
- uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 ready */
- } bit; /*!< Structure used for bit access */
- struct {
- uint8_t :4; /*!< bit: 0.. 3 Reserved */
- uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request */
- uint8_t :2; /*!< bit: 6.. 7 Reserved */
- } vec; /*!< Structure used for vec access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPSTATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPSTATUS_OFFSET 0x106 /**< \brief (USB_DEVICE_EPSTATUS offset) DEVICE_ENDPOINT End Point Pipe Status */
-#define USB_DEVICE_EPSTATUS_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPSTATUS reset_value) DEVICE_ENDPOINT End Point Pipe Status */
-
-#define USB_DEVICE_EPSTATUS_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle Out */
-#define USB_DEVICE_EPSTATUS_DTGLOUT (0x1ul << USB_DEVICE_EPSTATUS_DTGLOUT_Pos)
-#define USB_DEVICE_EPSTATUS_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle In */
-#define USB_DEVICE_EPSTATUS_DTGLIN (0x1ul << USB_DEVICE_EPSTATUS_DTGLIN_Pos)
-#define USB_DEVICE_EPSTATUS_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUS) Current Bank */
-#define USB_DEVICE_EPSTATUS_CURBK (0x1ul << USB_DEVICE_EPSTATUS_CURBK_Pos)
-#define USB_DEVICE_EPSTATUS_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall 0 Request */
-#define USB_DEVICE_EPSTATUS_STALLRQ0 (1 << USB_DEVICE_EPSTATUS_STALLRQ0_Pos)
-#define USB_DEVICE_EPSTATUS_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUS) Stall 1 Request */
-#define USB_DEVICE_EPSTATUS_STALLRQ1 (1 << USB_DEVICE_EPSTATUS_STALLRQ1_Pos)
-#define USB_DEVICE_EPSTATUS_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall x Request */
-#define USB_DEVICE_EPSTATUS_STALLRQ_Msk (0x3ul << USB_DEVICE_EPSTATUS_STALLRQ_Pos)
-#define USB_DEVICE_EPSTATUS_STALLRQ(value) (USB_DEVICE_EPSTATUS_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUS_STALLRQ_Pos))
-#define USB_DEVICE_EPSTATUS_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUS) Bank 0 ready */
-#define USB_DEVICE_EPSTATUS_BK0RDY (0x1ul << USB_DEVICE_EPSTATUS_BK0RDY_Pos)
-#define USB_DEVICE_EPSTATUS_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUS) Bank 1 ready */
-#define USB_DEVICE_EPSTATUS_BK1RDY (0x1ul << USB_DEVICE_EPSTATUS_BK1RDY_Pos)
-#define USB_DEVICE_EPSTATUS_MASK 0xF7ul /**< \brief (USB_DEVICE_EPSTATUS) MASK Register */
-
-/* -------- USB_DEVICE_EPINTFLAG : (USB Offset: 0x107) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Flag -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union { // __I to avoid read-modify-write on write-to-clear register
- struct {
- __I uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 */
- __I uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 */
- __I uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 */
- __I uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 */
- __I uint8_t RXSTP:1; /*!< bit: 4 Received Setup */
- __I uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out */
- __I uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out */
- __I uint8_t :1; /*!< bit: 7 Reserved */
- } bit; /*!< Structure used for bit access */
- struct {
- __I uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x */
- __I uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x */
- __I uint8_t :1; /*!< bit: 4 Reserved */
- __I uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out */
- __I uint8_t :1; /*!< bit: 7 Reserved */
- } vec; /*!< Structure used for vec access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPINTFLAG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPINTFLAG_OFFSET 0x107 /**< \brief (USB_DEVICE_EPINTFLAG offset) DEVICE_ENDPOINT End Point Interrupt Flag */
-#define USB_DEVICE_EPINTFLAG_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPINTFLAG reset_value) DEVICE_ENDPOINT End Point Interrupt Flag */
-
-#define USB_DEVICE_EPINTFLAG_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 0 */
-#define USB_DEVICE_EPINTFLAG_TRCPT0 (1 << USB_DEVICE_EPINTFLAG_TRCPT0_Pos)
-#define USB_DEVICE_EPINTFLAG_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 1 */
-#define USB_DEVICE_EPINTFLAG_TRCPT1 (1 << USB_DEVICE_EPINTFLAG_TRCPT1_Pos)
-#define USB_DEVICE_EPINTFLAG_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete x */
-#define USB_DEVICE_EPINTFLAG_TRCPT_Msk (0x3ul << USB_DEVICE_EPINTFLAG_TRCPT_Pos)
-#define USB_DEVICE_EPINTFLAG_TRCPT(value) (USB_DEVICE_EPINTFLAG_TRCPT_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRCPT_Pos))
-#define USB_DEVICE_EPINTFLAG_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 0 */
-#define USB_DEVICE_EPINTFLAG_TRFAIL0 (1 << USB_DEVICE_EPINTFLAG_TRFAIL0_Pos)
-#define USB_DEVICE_EPINTFLAG_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 1 */
-#define USB_DEVICE_EPINTFLAG_TRFAIL1 (1 << USB_DEVICE_EPINTFLAG_TRFAIL1_Pos)
-#define USB_DEVICE_EPINTFLAG_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow x */
-#define USB_DEVICE_EPINTFLAG_TRFAIL_Msk (0x3ul << USB_DEVICE_EPINTFLAG_TRFAIL_Pos)
-#define USB_DEVICE_EPINTFLAG_TRFAIL(value) (USB_DEVICE_EPINTFLAG_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRFAIL_Pos))
-#define USB_DEVICE_EPINTFLAG_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTFLAG) Received Setup */
-#define USB_DEVICE_EPINTFLAG_RXSTP (0x1ul << USB_DEVICE_EPINTFLAG_RXSTP_Pos)
-#define USB_DEVICE_EPINTFLAG_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 0 In/out */
-#define USB_DEVICE_EPINTFLAG_STALL0 (1 << USB_DEVICE_EPINTFLAG_STALL0_Pos)
-#define USB_DEVICE_EPINTFLAG_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 1 In/out */
-#define USB_DEVICE_EPINTFLAG_STALL1 (1 << USB_DEVICE_EPINTFLAG_STALL1_Pos)
-#define USB_DEVICE_EPINTFLAG_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall x In/out */
-#define USB_DEVICE_EPINTFLAG_STALL_Msk (0x3ul << USB_DEVICE_EPINTFLAG_STALL_Pos)
-#define USB_DEVICE_EPINTFLAG_STALL(value) (USB_DEVICE_EPINTFLAG_STALL_Msk & ((value) << USB_DEVICE_EPINTFLAG_STALL_Pos))
-#define USB_DEVICE_EPINTFLAG_MASK 0x7Ful /**< \brief (USB_DEVICE_EPINTFLAG) MASK Register */
-
-/* -------- USB_DEVICE_EPINTENCLR : (USB Offset: 0x108) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Clear Flag -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Disable */
- uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Disable */
- uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Disable */
- uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Disable */
- uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Disable */
- uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/Out Interrupt Disable */
- uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/Out Interrupt Disable */
- uint8_t :1; /*!< bit: 7 Reserved */
- } bit; /*!< Structure used for bit access */
- struct {
- uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Disable */
- uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Disable */
- uint8_t :1; /*!< bit: 4 Reserved */
- uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/Out Interrupt Disable */
- uint8_t :1; /*!< bit: 7 Reserved */
- } vec; /*!< Structure used for vec access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPINTENCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPINTENCLR_OFFSET 0x108 /**< \brief (USB_DEVICE_EPINTENCLR offset) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
-#define USB_DEVICE_EPINTENCLR_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPINTENCLR reset_value) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
-
-#define USB_DEVICE_EPINTENCLR_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 0 Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_TRCPT0 (1 << USB_DEVICE_EPINTENCLR_TRCPT0_Pos)
-#define USB_DEVICE_EPINTENCLR_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 1 Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_TRCPT1 (1 << USB_DEVICE_EPINTENCLR_TRCPT1_Pos)
-#define USB_DEVICE_EPINTENCLR_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete x Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_TRCPT_Msk (0x3ul << USB_DEVICE_EPINTENCLR_TRCPT_Pos)
-#define USB_DEVICE_EPINTENCLR_TRCPT(value) (USB_DEVICE_EPINTENCLR_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRCPT_Pos))
-#define USB_DEVICE_EPINTENCLR_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 0 Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_TRFAIL0 (1 << USB_DEVICE_EPINTENCLR_TRFAIL0_Pos)
-#define USB_DEVICE_EPINTENCLR_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 1 Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_TRFAIL1 (1 << USB_DEVICE_EPINTENCLR_TRFAIL1_Pos)
-#define USB_DEVICE_EPINTENCLR_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow x Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_TRFAIL_Msk (0x3ul << USB_DEVICE_EPINTENCLR_TRFAIL_Pos)
-#define USB_DEVICE_EPINTENCLR_TRFAIL(value) (USB_DEVICE_EPINTENCLR_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRFAIL_Pos))
-#define USB_DEVICE_EPINTENCLR_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENCLR) Received Setup Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_RXSTP (0x1ul << USB_DEVICE_EPINTENCLR_RXSTP_Pos)
-#define USB_DEVICE_EPINTENCLR_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 0 In/Out Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_STALL0 (1 << USB_DEVICE_EPINTENCLR_STALL0_Pos)
-#define USB_DEVICE_EPINTENCLR_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 1 In/Out Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_STALL1 (1 << USB_DEVICE_EPINTENCLR_STALL1_Pos)
-#define USB_DEVICE_EPINTENCLR_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall x In/Out Interrupt Disable */
-#define USB_DEVICE_EPINTENCLR_STALL_Msk (0x3ul << USB_DEVICE_EPINTENCLR_STALL_Pos)
-#define USB_DEVICE_EPINTENCLR_STALL(value) (USB_DEVICE_EPINTENCLR_STALL_Msk & ((value) << USB_DEVICE_EPINTENCLR_STALL_Pos))
-#define USB_DEVICE_EPINTENCLR_MASK 0x7Ful /**< \brief (USB_DEVICE_EPINTENCLR) MASK Register */
-
-/* -------- USB_DEVICE_EPINTENSET : (USB Offset: 0x109) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Set Flag -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Enable */
- uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Enable */
- uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Enable */
- uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Enable */
- uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Enable */
- uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out Interrupt enable */
- uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out Interrupt enable */
- uint8_t :1; /*!< bit: 7 Reserved */
- } bit; /*!< Structure used for bit access */
- struct {
- uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Enable */
- uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Enable */
- uint8_t :1; /*!< bit: 4 Reserved */
- uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out Interrupt enable */
- uint8_t :1; /*!< bit: 7 Reserved */
- } vec; /*!< Structure used for vec access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_EPINTENSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EPINTENSET_OFFSET 0x109 /**< \brief (USB_DEVICE_EPINTENSET offset) DEVICE_ENDPOINT End Point Interrupt Set Flag */
-#define USB_DEVICE_EPINTENSET_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPINTENSET reset_value) DEVICE_ENDPOINT End Point Interrupt Set Flag */
-
-#define USB_DEVICE_EPINTENSET_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 0 Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_TRCPT0 (1 << USB_DEVICE_EPINTENSET_TRCPT0_Pos)
-#define USB_DEVICE_EPINTENSET_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 1 Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_TRCPT1 (1 << USB_DEVICE_EPINTENSET_TRCPT1_Pos)
-#define USB_DEVICE_EPINTENSET_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete x Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_TRCPT_Msk (0x3ul << USB_DEVICE_EPINTENSET_TRCPT_Pos)
-#define USB_DEVICE_EPINTENSET_TRCPT(value) (USB_DEVICE_EPINTENSET_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENSET_TRCPT_Pos))
-#define USB_DEVICE_EPINTENSET_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 0 Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_TRFAIL0 (1 << USB_DEVICE_EPINTENSET_TRFAIL0_Pos)
-#define USB_DEVICE_EPINTENSET_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 1 Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_TRFAIL1 (1 << USB_DEVICE_EPINTENSET_TRFAIL1_Pos)
-#define USB_DEVICE_EPINTENSET_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow x Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_TRFAIL_Msk (0x3ul << USB_DEVICE_EPINTENSET_TRFAIL_Pos)
-#define USB_DEVICE_EPINTENSET_TRFAIL(value) (USB_DEVICE_EPINTENSET_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENSET_TRFAIL_Pos))
-#define USB_DEVICE_EPINTENSET_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENSET) Received Setup Interrupt Enable */
-#define USB_DEVICE_EPINTENSET_RXSTP (0x1ul << USB_DEVICE_EPINTENSET_RXSTP_Pos)
-#define USB_DEVICE_EPINTENSET_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall 0 In/out Interrupt enable */
-#define USB_DEVICE_EPINTENSET_STALL0 (1 << USB_DEVICE_EPINTENSET_STALL0_Pos)
-#define USB_DEVICE_EPINTENSET_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENSET) Stall 1 In/out Interrupt enable */
-#define USB_DEVICE_EPINTENSET_STALL1 (1 << USB_DEVICE_EPINTENSET_STALL1_Pos)
-#define USB_DEVICE_EPINTENSET_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall x In/out Interrupt enable */
-#define USB_DEVICE_EPINTENSET_STALL_Msk (0x3ul << USB_DEVICE_EPINTENSET_STALL_Pos)
-#define USB_DEVICE_EPINTENSET_STALL(value) (USB_DEVICE_EPINTENSET_STALL_Msk & ((value) << USB_DEVICE_EPINTENSET_STALL_Pos))
-#define USB_DEVICE_EPINTENSET_MASK 0x7Ful /**< \brief (USB_DEVICE_EPINTENSET) MASK Register */
-
-/* -------- USB_DEVICE_ADDR : (USB Offset: 0x000) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint32_t ADDR:32; /*!< bit: 0..31 Adress of data buffer */
- } bit; /*!< Structure used for bit access */
- uint32_t reg; /*!< Type used for register access */
-} USB_DEVICE_ADDR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_ADDR_OFFSET 0x000 /**< \brief (USB_DEVICE_ADDR offset) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */
-
-#define USB_DEVICE_ADDR_ADDR_Pos 0 /**< \brief (USB_DEVICE_ADDR) Adress of data buffer */
-#define USB_DEVICE_ADDR_ADDR_Msk (0xFFFFFFFFul << USB_DEVICE_ADDR_ADDR_Pos)
-#define USB_DEVICE_ADDR_ADDR(value) (USB_DEVICE_ADDR_ADDR_Msk & ((value) << USB_DEVICE_ADDR_ADDR_Pos))
-#define USB_DEVICE_ADDR_MASK 0xFFFFFFFFul /**< \brief (USB_DEVICE_ADDR) MASK Register */
-
-/* -------- USB_DEVICE_PCKSIZE : (USB Offset: 0x004) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Packet Size -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint32_t BYTE_COUNT:14; /*!< bit: 0..13 Byte Count */
- uint32_t MULTI_PACKET_SIZE:14; /*!< bit: 14..27 Multi Packet In or Out size */
- uint32_t SIZE:3; /*!< bit: 28..30 Enpoint size */
- uint32_t AUTO_ZLP:1; /*!< bit: 31 Automatic Zero Length Packet */
- } bit; /*!< Structure used for bit access */
- uint32_t reg; /*!< Type used for register access */
-} USB_DEVICE_PCKSIZE_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_PCKSIZE_OFFSET 0x004 /**< \brief (USB_DEVICE_PCKSIZE offset) DEVICE_DESC_BANK Endpoint Bank, Packet Size */
-
-#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos 0 /**< \brief (USB_DEVICE_PCKSIZE) Byte Count */
-#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk (0x3FFFul << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos)
-#define USB_DEVICE_PCKSIZE_BYTE_COUNT(value) (USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk & ((value) << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos))
-#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos 14 /**< \brief (USB_DEVICE_PCKSIZE) Multi Packet In or Out size */
-#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk (0x3FFFul << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos)
-#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE(value) (USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos))
-#define USB_DEVICE_PCKSIZE_SIZE_Pos 28 /**< \brief (USB_DEVICE_PCKSIZE) Enpoint size */
-#define USB_DEVICE_PCKSIZE_SIZE_Msk (0x7ul << USB_DEVICE_PCKSIZE_SIZE_Pos)
-#define USB_DEVICE_PCKSIZE_SIZE(value) (USB_DEVICE_PCKSIZE_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_SIZE_Pos))
-#define USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos 31 /**< \brief (USB_DEVICE_PCKSIZE) Automatic Zero Length Packet */
-#define USB_DEVICE_PCKSIZE_AUTO_ZLP (0x1ul << USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos)
-#define USB_DEVICE_PCKSIZE_MASK 0xFFFFFFFFul /**< \brief (USB_DEVICE_PCKSIZE) MASK Register */
-
-/* -------- USB_DEVICE_EXTREG : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE_DESC_BANK Endpoint Bank, Extended -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint16_t SUBPID:4; /*!< bit: 0.. 3 SUBPID field send with extended token */
- uint16_t VARIABLE:11; /*!< bit: 4..14 Variable field send with extended token */
- uint16_t :1; /*!< bit: 15 Reserved */
- } bit; /*!< Structure used for bit access */
- uint16_t reg; /*!< Type used for register access */
-} USB_DEVICE_EXTREG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_EXTREG_OFFSET 0x008 /**< \brief (USB_DEVICE_EXTREG offset) DEVICE_DESC_BANK Endpoint Bank, Extended */
-
-#define USB_DEVICE_EXTREG_SUBPID_Pos 0 /**< \brief (USB_DEVICE_EXTREG) SUBPID field send with extended token */
-#define USB_DEVICE_EXTREG_SUBPID_Msk (0xFul << USB_DEVICE_EXTREG_SUBPID_Pos)
-#define USB_DEVICE_EXTREG_SUBPID(value) (USB_DEVICE_EXTREG_SUBPID_Msk & ((value) << USB_DEVICE_EXTREG_SUBPID_Pos))
-#define USB_DEVICE_EXTREG_VARIABLE_Pos 4 /**< \brief (USB_DEVICE_EXTREG) Variable field send with extended token */
-#define USB_DEVICE_EXTREG_VARIABLE_Msk (0x7FFul << USB_DEVICE_EXTREG_VARIABLE_Pos)
-#define USB_DEVICE_EXTREG_VARIABLE(value) (USB_DEVICE_EXTREG_VARIABLE_Msk & ((value) << USB_DEVICE_EXTREG_VARIABLE_Pos))
-#define USB_DEVICE_EXTREG_MASK 0x7FFFul /**< \brief (USB_DEVICE_EXTREG) MASK Register */
-
-/* -------- USB_DEVICE_STATUS_BK : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE_DESC_BANK Enpoint Bank, Status of Bank -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- struct {
- uint8_t CRCERR:1; /*!< bit: 0 CRC Error Status */
- uint8_t ERRORFLOW:1; /*!< bit: 1 Error Flow Status */
- uint8_t :6; /*!< bit: 2.. 7 Reserved */
- } bit; /*!< Structure used for bit access */
- uint8_t reg; /*!< Type used for register access */
-} USB_DEVICE_STATUS_BK_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define USB_DEVICE_STATUS_BK_OFFSET 0x00A /**< \brief (USB_DEVICE_STATUS_BK offset) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */
-
-#define USB_DEVICE_STATUS_BK_CRCERR_Pos 0 /**< \brief (USB_DEVICE_STATUS_BK) CRC Error Status */
-#define USB_DEVICE_STATUS_BK_CRCERR (0x1ul << USB_DEVICE_STATUS_BK_CRCERR_Pos)
-#define USB_DEVICE_STATUS_BK_ERRORFLOW_Pos 1 /**< \brief (USB_DEVICE_STATUS_BK) Error Flow Status */
-#define USB_DEVICE_STATUS_BK_ERRORFLOW (0x1ul << USB_DEVICE_STATUS_BK_ERRORFLOW_Pos)
-#define USB_DEVICE_STATUS_BK_MASK 0x03ul /**< \brief (USB_DEVICE_STATUS_BK) MASK Register */
-
-/** \brief UsbDeviceDescBank SRAM registers */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef struct {
- __IO USB_DEVICE_ADDR_Type ADDR; /**< \brief Offset: 0x000 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */
- __IO USB_DEVICE_PCKSIZE_Type PCKSIZE; /**< \brief Offset: 0x004 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Packet Size */
- __IO USB_DEVICE_EXTREG_Type EXTREG; /**< \brief Offset: 0x008 (R/W 16) DEVICE_DESC_BANK Endpoint Bank, Extended */
- __IO USB_DEVICE_STATUS_BK_Type STATUS_BK; /**< \brief Offset: 0x00A (R/W 8) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */
- RoReg8 Reserved1[0x5];
-} UsbDeviceDescBank;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/** \brief UsbDeviceEndpoint hardware registers */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef struct {
- __IO USB_DEVICE_EPCFG_Type EPCFG; /**< \brief Offset: 0x000 (R/W 8) DEVICE_ENDPOINT End Point Configuration */
- RoReg8 Reserved1[0x3];
- __O USB_DEVICE_EPSTATUSCLR_Type EPSTATUSCLR; /**< \brief Offset: 0x004 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Clear */
- __O USB_DEVICE_EPSTATUSSET_Type EPSTATUSSET; /**< \brief Offset: 0x005 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Set */
- __I USB_DEVICE_EPSTATUS_Type EPSTATUS; /**< \brief Offset: 0x006 (R/ 8) DEVICE_ENDPOINT End Point Pipe Status */
- __IO USB_DEVICE_EPINTFLAG_Type EPINTFLAG; /**< \brief Offset: 0x007 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Flag */
- __IO USB_DEVICE_EPINTENCLR_Type EPINTENCLR; /**< \brief Offset: 0x008 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
- __IO USB_DEVICE_EPINTENSET_Type EPINTENSET; /**< \brief Offset: 0x009 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Set Flag */
- RoReg8 Reserved2[0x16];
-} UsbDeviceEndpoint;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/** \brief USB_DEVICE APB hardware registers */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef struct { /* USB is Device */
- __IO USB_CTRLA_Type CTRLA; /**< \brief Offset: 0x000 (R/W 8) Control A */
- RoReg8 Reserved1[0x1];
- __I USB_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x002 (R/ 8) Synchronization Busy */
- RoReg8 Reserved2[0x5];
- __IO USB_DEVICE_CTRLB_Type CTRLB; /**< \brief Offset: 0x008 (R/W 16) DEVICE Control B */
- __IO USB_DEVICE_DADD_Type DADD; /**< \brief Offset: 0x00A (R/W 8) DEVICE Device Address */
- RoReg8 Reserved3[0x1];
- __I USB_DEVICE_STATUS_Type STATUS; /**< \brief Offset: 0x00C (R/ 8) DEVICE Status */
- __I USB_FSMSTATUS_Type FSMSTATUS; /**< \brief Offset: 0x00D (R/ 8) Finite State Machine Status */
- RoReg8 Reserved4[0x2];
- __I USB_DEVICE_FNUM_Type FNUM; /**< \brief Offset: 0x010 (R/ 16) DEVICE Device Frame Number */
- RoReg8 Reserved5[0x2];
- __IO USB_DEVICE_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x014 (R/W 16) DEVICE Device Interrupt Enable Clear */
- RoReg8 Reserved6[0x2];
- __IO USB_DEVICE_INTENSET_Type INTENSET; /**< \brief Offset: 0x018 (R/W 16) DEVICE Device Interrupt Enable Set */
- RoReg8 Reserved7[0x2];
- __IO USB_DEVICE_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x01C (R/W 16) DEVICE Device Interrupt Flag */
- RoReg8 Reserved8[0x2];
- __I USB_DEVICE_EPINTSMRY_Type EPINTSMRY; /**< \brief Offset: 0x020 (R/ 16) DEVICE End Point Interrupt Summary */
- RoReg8 Reserved9[0x2];
- __IO USB_DESCADD_Type DESCADD; /**< \brief Offset: 0x024 (R/W 32) Descriptor Address */
- __IO USB_PADCAL_Type PADCAL; /**< \brief Offset: 0x028 (R/W 16) USB PAD Calibration */
- RoReg8 Reserved10[0xD6];
- UsbDeviceEndpoint DeviceEndpoint[8]; /**< \brief Offset: 0x100 UsbDeviceEndpoint groups [EPT_NUM] */
-} UsbDevice;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/** \brief USB_DEVICE Descriptor SRAM registers */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef struct { /* USB is Device */
- UsbDeviceDescBank DeviceDescBank[2]; /**< \brief Offset: 0x000 UsbDeviceDescBank groups */
-} UsbDeviceDescriptor;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#ifdef __GNUC__
- #define SECTION_USB_DESCRIPTOR __attribute__ ((section(".hsram")))
-#elif defined(__ICCARM__)
- #define SECTION_USB_DESCRIPTOR @".hsram"
-#endif
-
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
- UsbDevice DEVICE; /**< \brief Offset: 0x000 USB is Device */
-} Usb;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/*@}*/
-
-#endif /* _SAML22_USB_COMPONENT_ */
+/** + * \file + * + * \brief Component description for USB + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_USB_COMPONENT_ +#define _SAML22_USB_COMPONENT_ + +/* ========================================================================== */ +/** SOFTWARE API DEFINITION FOR USB */ +/* ========================================================================== */ +/** \addtogroup SAML22_USB Universal Serial Bus */ +/*@{*/ + +#define USB_U2222 +#define REV_USB 0x111 + +/* -------- USB_CTRLA : (USB Offset: 0x000) (R/W 8) Control A -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t SWRST:1; /*!< bit: 0 Software Reset */ + uint8_t ENABLE:1; /*!< bit: 1 Enable */ + uint8_t RUNSTDBY:1; /*!< bit: 2 Run in Standby Mode */ + uint8_t :4; /*!< bit: 3.. 6 Reserved */ + uint8_t MODE:1; /*!< bit: 7 Operating Mode */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_CTRLA_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_CTRLA_OFFSET 0x000 /**< \brief (USB_CTRLA offset) Control A */ +#define USB_CTRLA_RESETVALUE _U_(0x00) /**< \brief (USB_CTRLA reset_value) Control A */ + +#define USB_CTRLA_SWRST_Pos 0 /**< \brief (USB_CTRLA) Software Reset */ +#define USB_CTRLA_SWRST (_U_(0x1) << USB_CTRLA_SWRST_Pos) +#define USB_CTRLA_ENABLE_Pos 1 /**< \brief (USB_CTRLA) Enable */ +#define USB_CTRLA_ENABLE (_U_(0x1) << USB_CTRLA_ENABLE_Pos) +#define USB_CTRLA_RUNSTDBY_Pos 2 /**< \brief (USB_CTRLA) Run in Standby Mode */ +#define USB_CTRLA_RUNSTDBY (_U_(0x1) << USB_CTRLA_RUNSTDBY_Pos) +#define USB_CTRLA_MODE_Pos 7 /**< \brief (USB_CTRLA) Operating Mode */ +#define USB_CTRLA_MODE (_U_(0x1) << USB_CTRLA_MODE_Pos) +#define USB_CTRLA_MODE_DEVICE_Val _U_(0x0) /**< \brief (USB_CTRLA) Device Mode */ +#define USB_CTRLA_MODE_DEVICE (USB_CTRLA_MODE_DEVICE_Val << USB_CTRLA_MODE_Pos) +#define USB_CTRLA_MASK _U_(0x87) /**< \brief (USB_CTRLA) MASK Register */ + +/* -------- USB_SYNCBUSY : (USB Offset: 0x002) (R/ 8) Synchronization Busy -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t SWRST:1; /*!< bit: 0 Software Reset Synchronization Busy */ + uint8_t ENABLE:1; /*!< bit: 1 Enable Synchronization Busy */ + uint8_t :6; /*!< bit: 2.. 7 Reserved */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_SYNCBUSY_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_SYNCBUSY_OFFSET 0x002 /**< \brief (USB_SYNCBUSY offset) Synchronization Busy */ +#define USB_SYNCBUSY_RESETVALUE _U_(0x00) /**< \brief (USB_SYNCBUSY reset_value) Synchronization Busy */ + +#define USB_SYNCBUSY_SWRST_Pos 0 /**< \brief (USB_SYNCBUSY) Software Reset Synchronization Busy */ +#define USB_SYNCBUSY_SWRST (_U_(0x1) << USB_SYNCBUSY_SWRST_Pos) +#define USB_SYNCBUSY_ENABLE_Pos 1 /**< \brief (USB_SYNCBUSY) Enable Synchronization Busy */ +#define USB_SYNCBUSY_ENABLE (_U_(0x1) << USB_SYNCBUSY_ENABLE_Pos) +#define USB_SYNCBUSY_MASK _U_(0x03) /**< \brief (USB_SYNCBUSY) MASK Register */ + +/* -------- USB_QOSCTRL : (USB Offset: 0x003) (R/W 8) USB Quality Of Service -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t CQOS:2; /*!< bit: 0.. 1 Configuration Quality of Service */ + uint8_t DQOS:2; /*!< bit: 2.. 3 Data Quality of Service */ + uint8_t :4; /*!< bit: 4.. 7 Reserved */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_QOSCTRL_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_QOSCTRL_OFFSET 0x003 /**< \brief (USB_QOSCTRL offset) USB Quality Of Service */ +#define USB_QOSCTRL_RESETVALUE _U_(0x0F) /**< \brief (USB_QOSCTRL reset_value) USB Quality Of Service */ + +#define USB_QOSCTRL_CQOS_Pos 0 /**< \brief (USB_QOSCTRL) Configuration Quality of Service */ +#define USB_QOSCTRL_CQOS_Msk (_U_(0x3) << USB_QOSCTRL_CQOS_Pos) +#define USB_QOSCTRL_CQOS(value) (USB_QOSCTRL_CQOS_Msk & ((value) << USB_QOSCTRL_CQOS_Pos)) +#define USB_QOSCTRL_DQOS_Pos 2 /**< \brief (USB_QOSCTRL) Data Quality of Service */ +#define USB_QOSCTRL_DQOS_Msk (_U_(0x3) << USB_QOSCTRL_DQOS_Pos) +#define USB_QOSCTRL_DQOS(value) (USB_QOSCTRL_DQOS_Msk & ((value) << USB_QOSCTRL_DQOS_Pos)) +#define USB_QOSCTRL_MASK _U_(0x0F) /**< \brief (USB_QOSCTRL) MASK Register */ + +/* -------- USB_DEVICE_CTRLB : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE Control B -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t DETACH:1; /*!< bit: 0 Detach */ + uint16_t UPRSM:1; /*!< bit: 1 Upstream Resume */ + uint16_t SPDCONF:2; /*!< bit: 2.. 3 Speed Configuration */ + uint16_t NREPLY:1; /*!< bit: 4 No Reply */ + uint16_t TSTJ:1; /*!< bit: 5 Test mode J */ + uint16_t TSTK:1; /*!< bit: 6 Test mode K */ + uint16_t TSTPCKT:1; /*!< bit: 7 Test packet mode */ + uint16_t OPMODE2:1; /*!< bit: 8 Specific Operational Mode */ + uint16_t GNAK:1; /*!< bit: 9 Global NAK */ + uint16_t LPMHDSK:2; /*!< bit: 10..11 Link Power Management Handshake */ + uint16_t :4; /*!< bit: 12..15 Reserved */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_CTRLB_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_CTRLB_OFFSET 0x008 /**< \brief (USB_DEVICE_CTRLB offset) DEVICE Control B */ +#define USB_DEVICE_CTRLB_RESETVALUE _U_(0x0001) /**< \brief (USB_DEVICE_CTRLB reset_value) DEVICE Control B */ + +#define USB_DEVICE_CTRLB_DETACH_Pos 0 /**< \brief (USB_DEVICE_CTRLB) Detach */ +#define USB_DEVICE_CTRLB_DETACH (_U_(0x1) << USB_DEVICE_CTRLB_DETACH_Pos) +#define USB_DEVICE_CTRLB_UPRSM_Pos 1 /**< \brief (USB_DEVICE_CTRLB) Upstream Resume */ +#define USB_DEVICE_CTRLB_UPRSM (_U_(0x1) << USB_DEVICE_CTRLB_UPRSM_Pos) +#define USB_DEVICE_CTRLB_SPDCONF_Pos 2 /**< \brief (USB_DEVICE_CTRLB) Speed Configuration */ +#define USB_DEVICE_CTRLB_SPDCONF_Msk (_U_(0x3) << USB_DEVICE_CTRLB_SPDCONF_Pos) +#define USB_DEVICE_CTRLB_SPDCONF(value) (USB_DEVICE_CTRLB_SPDCONF_Msk & ((value) << USB_DEVICE_CTRLB_SPDCONF_Pos)) +#define USB_DEVICE_CTRLB_SPDCONF_FS_Val _U_(0x0) /**< \brief (USB_DEVICE_CTRLB) FS : Full Speed */ +#define USB_DEVICE_CTRLB_SPDCONF_LS_Val _U_(0x1) /**< \brief (USB_DEVICE_CTRLB) LS : Low Speed */ +#define USB_DEVICE_CTRLB_SPDCONF_HS_Val _U_(0x2) /**< \brief (USB_DEVICE_CTRLB) HS : High Speed capable */ +#define USB_DEVICE_CTRLB_SPDCONF_HSTM_Val _U_(0x3) /**< \brief (USB_DEVICE_CTRLB) HSTM: High Speed Test Mode (force high-speed mode for test mode) */ +#define USB_DEVICE_CTRLB_SPDCONF_FS (USB_DEVICE_CTRLB_SPDCONF_FS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos) +#define USB_DEVICE_CTRLB_SPDCONF_LS (USB_DEVICE_CTRLB_SPDCONF_LS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos) +#define USB_DEVICE_CTRLB_SPDCONF_HS (USB_DEVICE_CTRLB_SPDCONF_HS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos) +#define USB_DEVICE_CTRLB_SPDCONF_HSTM (USB_DEVICE_CTRLB_SPDCONF_HSTM_Val << USB_DEVICE_CTRLB_SPDCONF_Pos) +#define USB_DEVICE_CTRLB_NREPLY_Pos 4 /**< \brief (USB_DEVICE_CTRLB) No Reply */ +#define USB_DEVICE_CTRLB_NREPLY (_U_(0x1) << USB_DEVICE_CTRLB_NREPLY_Pos) +#define USB_DEVICE_CTRLB_TSTJ_Pos 5 /**< \brief (USB_DEVICE_CTRLB) Test mode J */ +#define USB_DEVICE_CTRLB_TSTJ (_U_(0x1) << USB_DEVICE_CTRLB_TSTJ_Pos) +#define USB_DEVICE_CTRLB_TSTK_Pos 6 /**< \brief (USB_DEVICE_CTRLB) Test mode K */ +#define USB_DEVICE_CTRLB_TSTK (_U_(0x1) << USB_DEVICE_CTRLB_TSTK_Pos) +#define USB_DEVICE_CTRLB_TSTPCKT_Pos 7 /**< \brief (USB_DEVICE_CTRLB) Test packet mode */ +#define USB_DEVICE_CTRLB_TSTPCKT (_U_(0x1) << USB_DEVICE_CTRLB_TSTPCKT_Pos) +#define USB_DEVICE_CTRLB_OPMODE2_Pos 8 /**< \brief (USB_DEVICE_CTRLB) Specific Operational Mode */ +#define USB_DEVICE_CTRLB_OPMODE2 (_U_(0x1) << USB_DEVICE_CTRLB_OPMODE2_Pos) +#define USB_DEVICE_CTRLB_GNAK_Pos 9 /**< \brief (USB_DEVICE_CTRLB) Global NAK */ +#define USB_DEVICE_CTRLB_GNAK (_U_(0x1) << USB_DEVICE_CTRLB_GNAK_Pos) +#define USB_DEVICE_CTRLB_LPMHDSK_Pos 10 /**< \brief (USB_DEVICE_CTRLB) Link Power Management Handshake */ +#define USB_DEVICE_CTRLB_LPMHDSK_Msk (_U_(0x3) << USB_DEVICE_CTRLB_LPMHDSK_Pos) +#define USB_DEVICE_CTRLB_LPMHDSK(value) (USB_DEVICE_CTRLB_LPMHDSK_Msk & ((value) << USB_DEVICE_CTRLB_LPMHDSK_Pos)) +#define USB_DEVICE_CTRLB_LPMHDSK_NO_Val _U_(0x0) /**< \brief (USB_DEVICE_CTRLB) No handshake. LPM is not supported */ +#define USB_DEVICE_CTRLB_LPMHDSK_ACK_Val _U_(0x1) /**< \brief (USB_DEVICE_CTRLB) ACK */ +#define USB_DEVICE_CTRLB_LPMHDSK_NYET_Val _U_(0x2) /**< \brief (USB_DEVICE_CTRLB) NYET */ +#define USB_DEVICE_CTRLB_LPMHDSK_STALL_Val _U_(0x3) /**< \brief (USB_DEVICE_CTRLB) STALL */ +#define USB_DEVICE_CTRLB_LPMHDSK_NO (USB_DEVICE_CTRLB_LPMHDSK_NO_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos) +#define USB_DEVICE_CTRLB_LPMHDSK_ACK (USB_DEVICE_CTRLB_LPMHDSK_ACK_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos) +#define USB_DEVICE_CTRLB_LPMHDSK_NYET (USB_DEVICE_CTRLB_LPMHDSK_NYET_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos) +#define USB_DEVICE_CTRLB_LPMHDSK_STALL (USB_DEVICE_CTRLB_LPMHDSK_STALL_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos) +#define USB_DEVICE_CTRLB_MASK _U_(0x0FFF) /**< \brief (USB_DEVICE_CTRLB) MASK Register */ + +/* -------- USB_DEVICE_DADD : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE Device Address -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t DADD:7; /*!< bit: 0.. 6 Device Address */ + uint8_t ADDEN:1; /*!< bit: 7 Device Address Enable */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_DADD_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_DADD_OFFSET 0x00A /**< \brief (USB_DEVICE_DADD offset) DEVICE Device Address */ +#define USB_DEVICE_DADD_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_DADD reset_value) DEVICE Device Address */ + +#define USB_DEVICE_DADD_DADD_Pos 0 /**< \brief (USB_DEVICE_DADD) Device Address */ +#define USB_DEVICE_DADD_DADD_Msk (_U_(0x7F) << USB_DEVICE_DADD_DADD_Pos) +#define USB_DEVICE_DADD_DADD(value) (USB_DEVICE_DADD_DADD_Msk & ((value) << USB_DEVICE_DADD_DADD_Pos)) +#define USB_DEVICE_DADD_ADDEN_Pos 7 /**< \brief (USB_DEVICE_DADD) Device Address Enable */ +#define USB_DEVICE_DADD_ADDEN (_U_(0x1) << USB_DEVICE_DADD_ADDEN_Pos) +#define USB_DEVICE_DADD_MASK _U_(0xFF) /**< \brief (USB_DEVICE_DADD) MASK Register */ + +/* -------- USB_DEVICE_STATUS : (USB Offset: 0x00C) (R/ 8) DEVICE DEVICE Status -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t :2; /*!< bit: 0.. 1 Reserved */ + uint8_t SPEED:2; /*!< bit: 2.. 3 Speed Status */ + uint8_t :2; /*!< bit: 4.. 5 Reserved */ + uint8_t LINESTATE:2; /*!< bit: 6.. 7 USB Line State Status */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_STATUS_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_STATUS_OFFSET 0x00C /**< \brief (USB_DEVICE_STATUS offset) DEVICE Status */ +#define USB_DEVICE_STATUS_RESETVALUE _U_(0x40) /**< \brief (USB_DEVICE_STATUS reset_value) DEVICE Status */ + +#define USB_DEVICE_STATUS_SPEED_Pos 2 /**< \brief (USB_DEVICE_STATUS) Speed Status */ +#define USB_DEVICE_STATUS_SPEED_Msk (_U_(0x3) << USB_DEVICE_STATUS_SPEED_Pos) +#define USB_DEVICE_STATUS_SPEED(value) (USB_DEVICE_STATUS_SPEED_Msk & ((value) << USB_DEVICE_STATUS_SPEED_Pos)) +#define USB_DEVICE_STATUS_SPEED_FS_Val _U_(0x0) /**< \brief (USB_DEVICE_STATUS) Full-speed mode */ +#define USB_DEVICE_STATUS_SPEED_HS_Val _U_(0x1) /**< \brief (USB_DEVICE_STATUS) High-speed mode */ +#define USB_DEVICE_STATUS_SPEED_LS_Val _U_(0x2) /**< \brief (USB_DEVICE_STATUS) Low-speed mode */ +#define USB_DEVICE_STATUS_SPEED_FS (USB_DEVICE_STATUS_SPEED_FS_Val << USB_DEVICE_STATUS_SPEED_Pos) +#define USB_DEVICE_STATUS_SPEED_HS (USB_DEVICE_STATUS_SPEED_HS_Val << USB_DEVICE_STATUS_SPEED_Pos) +#define USB_DEVICE_STATUS_SPEED_LS (USB_DEVICE_STATUS_SPEED_LS_Val << USB_DEVICE_STATUS_SPEED_Pos) +#define USB_DEVICE_STATUS_LINESTATE_Pos 6 /**< \brief (USB_DEVICE_STATUS) USB Line State Status */ +#define USB_DEVICE_STATUS_LINESTATE_Msk (_U_(0x3) << USB_DEVICE_STATUS_LINESTATE_Pos) +#define USB_DEVICE_STATUS_LINESTATE(value) (USB_DEVICE_STATUS_LINESTATE_Msk & ((value) << USB_DEVICE_STATUS_LINESTATE_Pos)) +#define USB_DEVICE_STATUS_LINESTATE_0_Val _U_(0x0) /**< \brief (USB_DEVICE_STATUS) SE0/RESET */ +#define USB_DEVICE_STATUS_LINESTATE_1_Val _U_(0x1) /**< \brief (USB_DEVICE_STATUS) FS-J or LS-K State */ +#define USB_DEVICE_STATUS_LINESTATE_2_Val _U_(0x2) /**< \brief (USB_DEVICE_STATUS) FS-K or LS-J State */ +#define USB_DEVICE_STATUS_LINESTATE_0 (USB_DEVICE_STATUS_LINESTATE_0_Val << USB_DEVICE_STATUS_LINESTATE_Pos) +#define USB_DEVICE_STATUS_LINESTATE_1 (USB_DEVICE_STATUS_LINESTATE_1_Val << USB_DEVICE_STATUS_LINESTATE_Pos) +#define USB_DEVICE_STATUS_LINESTATE_2 (USB_DEVICE_STATUS_LINESTATE_2_Val << USB_DEVICE_STATUS_LINESTATE_Pos) +#define USB_DEVICE_STATUS_MASK _U_(0xCC) /**< \brief (USB_DEVICE_STATUS) MASK Register */ + +/* -------- USB_FSMSTATUS : (USB Offset: 0x00D) (R/ 8) Finite State Machine Status -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t FSMSTATE:7; /*!< bit: 0.. 6 Fine State Machine Status */ + uint8_t :1; /*!< bit: 7 Reserved */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_FSMSTATUS_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_FSMSTATUS_OFFSET 0x00D /**< \brief (USB_FSMSTATUS offset) Finite State Machine Status */ +#define USB_FSMSTATUS_RESETVALUE _U_(0x01) /**< \brief (USB_FSMSTATUS reset_value) Finite State Machine Status */ + +#define USB_FSMSTATUS_FSMSTATE_Pos 0 /**< \brief (USB_FSMSTATUS) Fine State Machine Status */ +#define USB_FSMSTATUS_FSMSTATE_Msk (_U_(0x7F) << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE(value) (USB_FSMSTATUS_FSMSTATE_Msk & ((value) << USB_FSMSTATUS_FSMSTATE_Pos)) +#define USB_FSMSTATUS_FSMSTATE_OFF_Val _U_(0x1) /**< \brief (USB_FSMSTATUS) OFF (L3). It corresponds to the powered-off, disconnected, and disabled state */ +#define USB_FSMSTATUS_FSMSTATE_ON_Val _U_(0x2) /**< \brief (USB_FSMSTATUS) ON (L0). It corresponds to the Idle and Active states */ +#define USB_FSMSTATUS_FSMSTATE_SUSPEND_Val _U_(0x4) /**< \brief (USB_FSMSTATUS) SUSPEND (L2) */ +#define USB_FSMSTATUS_FSMSTATE_SLEEP_Val _U_(0x8) /**< \brief (USB_FSMSTATUS) SLEEP (L1) */ +#define USB_FSMSTATUS_FSMSTATE_DNRESUME_Val _U_(0x10) /**< \brief (USB_FSMSTATUS) DNRESUME. Down Stream Resume. */ +#define USB_FSMSTATUS_FSMSTATE_UPRESUME_Val _U_(0x20) /**< \brief (USB_FSMSTATUS) UPRESUME. Up Stream Resume. */ +#define USB_FSMSTATUS_FSMSTATE_RESET_Val _U_(0x40) /**< \brief (USB_FSMSTATUS) RESET. USB lines Reset. */ +#define USB_FSMSTATUS_FSMSTATE_OFF (USB_FSMSTATUS_FSMSTATE_OFF_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE_ON (USB_FSMSTATUS_FSMSTATE_ON_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE_SUSPEND (USB_FSMSTATUS_FSMSTATE_SUSPEND_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE_SLEEP (USB_FSMSTATUS_FSMSTATE_SLEEP_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE_DNRESUME (USB_FSMSTATUS_FSMSTATE_DNRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE_UPRESUME (USB_FSMSTATUS_FSMSTATE_UPRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_FSMSTATE_RESET (USB_FSMSTATUS_FSMSTATE_RESET_Val << USB_FSMSTATUS_FSMSTATE_Pos) +#define USB_FSMSTATUS_MASK _U_(0x7F) /**< \brief (USB_FSMSTATUS) MASK Register */ + +/* -------- USB_DEVICE_FNUM : (USB Offset: 0x010) (R/ 16) DEVICE DEVICE Device Frame Number -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t MFNUM:3; /*!< bit: 0.. 2 Micro Frame Number */ + uint16_t FNUM:11; /*!< bit: 3..13 Frame Number */ + uint16_t :1; /*!< bit: 14 Reserved */ + uint16_t FNCERR:1; /*!< bit: 15 Frame Number CRC Error */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_FNUM_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_FNUM_OFFSET 0x010 /**< \brief (USB_DEVICE_FNUM offset) DEVICE Device Frame Number */ +#define USB_DEVICE_FNUM_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_FNUM reset_value) DEVICE Device Frame Number */ + +#define USB_DEVICE_FNUM_MFNUM_Pos 0 /**< \brief (USB_DEVICE_FNUM) Micro Frame Number */ +#define USB_DEVICE_FNUM_MFNUM_Msk (_U_(0x7) << USB_DEVICE_FNUM_MFNUM_Pos) +#define USB_DEVICE_FNUM_MFNUM(value) (USB_DEVICE_FNUM_MFNUM_Msk & ((value) << USB_DEVICE_FNUM_MFNUM_Pos)) +#define USB_DEVICE_FNUM_FNUM_Pos 3 /**< \brief (USB_DEVICE_FNUM) Frame Number */ +#define USB_DEVICE_FNUM_FNUM_Msk (_U_(0x7FF) << USB_DEVICE_FNUM_FNUM_Pos) +#define USB_DEVICE_FNUM_FNUM(value) (USB_DEVICE_FNUM_FNUM_Msk & ((value) << USB_DEVICE_FNUM_FNUM_Pos)) +#define USB_DEVICE_FNUM_FNCERR_Pos 15 /**< \brief (USB_DEVICE_FNUM) Frame Number CRC Error */ +#define USB_DEVICE_FNUM_FNCERR (_U_(0x1) << USB_DEVICE_FNUM_FNCERR_Pos) +#define USB_DEVICE_FNUM_MASK _U_(0xBFFF) /**< \brief (USB_DEVICE_FNUM) MASK Register */ + +/* -------- USB_DEVICE_INTENCLR : (USB Offset: 0x014) (R/W 16) DEVICE DEVICE Device Interrupt Enable Clear -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */ + uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */ + uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */ + uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */ + uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */ + uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */ + uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */ + uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */ + uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */ + uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */ + uint16_t :6; /*!< bit: 10..15 Reserved */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_INTENCLR_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_INTENCLR_OFFSET 0x014 /**< \brief (USB_DEVICE_INTENCLR offset) DEVICE Device Interrupt Enable Clear */ +#define USB_DEVICE_INTENCLR_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_INTENCLR reset_value) DEVICE Device Interrupt Enable Clear */ + +#define USB_DEVICE_INTENCLR_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENCLR) Suspend Interrupt Enable */ +#define USB_DEVICE_INTENCLR_SUSPEND (_U_(0x1) << USB_DEVICE_INTENCLR_SUSPEND_Pos) +#define USB_DEVICE_INTENCLR_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENCLR) Micro Start of Frame Interrupt Enable in High Speed Mode */ +#define USB_DEVICE_INTENCLR_MSOF (_U_(0x1) << USB_DEVICE_INTENCLR_MSOF_Pos) +#define USB_DEVICE_INTENCLR_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENCLR) Start Of Frame Interrupt Enable */ +#define USB_DEVICE_INTENCLR_SOF (_U_(0x1) << USB_DEVICE_INTENCLR_SOF_Pos) +#define USB_DEVICE_INTENCLR_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENCLR) End of Reset Interrupt Enable */ +#define USB_DEVICE_INTENCLR_EORST (_U_(0x1) << USB_DEVICE_INTENCLR_EORST_Pos) +#define USB_DEVICE_INTENCLR_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENCLR) Wake Up Interrupt Enable */ +#define USB_DEVICE_INTENCLR_WAKEUP (_U_(0x1) << USB_DEVICE_INTENCLR_WAKEUP_Pos) +#define USB_DEVICE_INTENCLR_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENCLR) End Of Resume Interrupt Enable */ +#define USB_DEVICE_INTENCLR_EORSM (_U_(0x1) << USB_DEVICE_INTENCLR_EORSM_Pos) +#define USB_DEVICE_INTENCLR_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENCLR) Upstream Resume Interrupt Enable */ +#define USB_DEVICE_INTENCLR_UPRSM (_U_(0x1) << USB_DEVICE_INTENCLR_UPRSM_Pos) +#define USB_DEVICE_INTENCLR_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENCLR) Ram Access Interrupt Enable */ +#define USB_DEVICE_INTENCLR_RAMACER (_U_(0x1) << USB_DEVICE_INTENCLR_RAMACER_Pos) +#define USB_DEVICE_INTENCLR_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Not Yet Interrupt Enable */ +#define USB_DEVICE_INTENCLR_LPMNYET (_U_(0x1) << USB_DEVICE_INTENCLR_LPMNYET_Pos) +#define USB_DEVICE_INTENCLR_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Suspend Interrupt Enable */ +#define USB_DEVICE_INTENCLR_LPMSUSP (_U_(0x1) << USB_DEVICE_INTENCLR_LPMSUSP_Pos) +#define USB_DEVICE_INTENCLR_MASK _U_(0x03FF) /**< \brief (USB_DEVICE_INTENCLR) MASK Register */ + +/* -------- USB_DEVICE_INTENSET : (USB Offset: 0x018) (R/W 16) DEVICE DEVICE Device Interrupt Enable Set -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */ + uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */ + uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */ + uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */ + uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */ + uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */ + uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */ + uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */ + uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */ + uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */ + uint16_t :6; /*!< bit: 10..15 Reserved */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_INTENSET_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_INTENSET_OFFSET 0x018 /**< \brief (USB_DEVICE_INTENSET offset) DEVICE Device Interrupt Enable Set */ +#define USB_DEVICE_INTENSET_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_INTENSET reset_value) DEVICE Device Interrupt Enable Set */ + +#define USB_DEVICE_INTENSET_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENSET) Suspend Interrupt Enable */ +#define USB_DEVICE_INTENSET_SUSPEND (_U_(0x1) << USB_DEVICE_INTENSET_SUSPEND_Pos) +#define USB_DEVICE_INTENSET_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENSET) Micro Start of Frame Interrupt Enable in High Speed Mode */ +#define USB_DEVICE_INTENSET_MSOF (_U_(0x1) << USB_DEVICE_INTENSET_MSOF_Pos) +#define USB_DEVICE_INTENSET_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENSET) Start Of Frame Interrupt Enable */ +#define USB_DEVICE_INTENSET_SOF (_U_(0x1) << USB_DEVICE_INTENSET_SOF_Pos) +#define USB_DEVICE_INTENSET_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENSET) End of Reset Interrupt Enable */ +#define USB_DEVICE_INTENSET_EORST (_U_(0x1) << USB_DEVICE_INTENSET_EORST_Pos) +#define USB_DEVICE_INTENSET_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENSET) Wake Up Interrupt Enable */ +#define USB_DEVICE_INTENSET_WAKEUP (_U_(0x1) << USB_DEVICE_INTENSET_WAKEUP_Pos) +#define USB_DEVICE_INTENSET_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENSET) End Of Resume Interrupt Enable */ +#define USB_DEVICE_INTENSET_EORSM (_U_(0x1) << USB_DEVICE_INTENSET_EORSM_Pos) +#define USB_DEVICE_INTENSET_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENSET) Upstream Resume Interrupt Enable */ +#define USB_DEVICE_INTENSET_UPRSM (_U_(0x1) << USB_DEVICE_INTENSET_UPRSM_Pos) +#define USB_DEVICE_INTENSET_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENSET) Ram Access Interrupt Enable */ +#define USB_DEVICE_INTENSET_RAMACER (_U_(0x1) << USB_DEVICE_INTENSET_RAMACER_Pos) +#define USB_DEVICE_INTENSET_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Not Yet Interrupt Enable */ +#define USB_DEVICE_INTENSET_LPMNYET (_U_(0x1) << USB_DEVICE_INTENSET_LPMNYET_Pos) +#define USB_DEVICE_INTENSET_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Suspend Interrupt Enable */ +#define USB_DEVICE_INTENSET_LPMSUSP (_U_(0x1) << USB_DEVICE_INTENSET_LPMSUSP_Pos) +#define USB_DEVICE_INTENSET_MASK _U_(0x03FF) /**< \brief (USB_DEVICE_INTENSET) MASK Register */ + +/* -------- USB_DEVICE_INTFLAG : (USB Offset: 0x01C) (R/W 16) DEVICE DEVICE Device Interrupt Flag -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { // __I to avoid read-modify-write on write-to-clear register + struct { + __I uint16_t SUSPEND:1; /*!< bit: 0 Suspend */ + __I uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame in High Speed Mode */ + __I uint16_t SOF:1; /*!< bit: 2 Start Of Frame */ + __I uint16_t EORST:1; /*!< bit: 3 End of Reset */ + __I uint16_t WAKEUP:1; /*!< bit: 4 Wake Up */ + __I uint16_t EORSM:1; /*!< bit: 5 End Of Resume */ + __I uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume */ + __I uint16_t RAMACER:1; /*!< bit: 7 Ram Access */ + __I uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet */ + __I uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend */ + __I uint16_t :6; /*!< bit: 10..15 Reserved */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_INTFLAG_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_INTFLAG_OFFSET 0x01C /**< \brief (USB_DEVICE_INTFLAG offset) DEVICE Device Interrupt Flag */ +#define USB_DEVICE_INTFLAG_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_INTFLAG reset_value) DEVICE Device Interrupt Flag */ + +#define USB_DEVICE_INTFLAG_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTFLAG) Suspend */ +#define USB_DEVICE_INTFLAG_SUSPEND (_U_(0x1) << USB_DEVICE_INTFLAG_SUSPEND_Pos) +#define USB_DEVICE_INTFLAG_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTFLAG) Micro Start of Frame in High Speed Mode */ +#define USB_DEVICE_INTFLAG_MSOF (_U_(0x1) << USB_DEVICE_INTFLAG_MSOF_Pos) +#define USB_DEVICE_INTFLAG_SOF_Pos 2 /**< \brief (USB_DEVICE_INTFLAG) Start Of Frame */ +#define USB_DEVICE_INTFLAG_SOF (_U_(0x1) << USB_DEVICE_INTFLAG_SOF_Pos) +#define USB_DEVICE_INTFLAG_EORST_Pos 3 /**< \brief (USB_DEVICE_INTFLAG) End of Reset */ +#define USB_DEVICE_INTFLAG_EORST (_U_(0x1) << USB_DEVICE_INTFLAG_EORST_Pos) +#define USB_DEVICE_INTFLAG_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTFLAG) Wake Up */ +#define USB_DEVICE_INTFLAG_WAKEUP (_U_(0x1) << USB_DEVICE_INTFLAG_WAKEUP_Pos) +#define USB_DEVICE_INTFLAG_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTFLAG) End Of Resume */ +#define USB_DEVICE_INTFLAG_EORSM (_U_(0x1) << USB_DEVICE_INTFLAG_EORSM_Pos) +#define USB_DEVICE_INTFLAG_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTFLAG) Upstream Resume */ +#define USB_DEVICE_INTFLAG_UPRSM (_U_(0x1) << USB_DEVICE_INTFLAG_UPRSM_Pos) +#define USB_DEVICE_INTFLAG_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTFLAG) Ram Access */ +#define USB_DEVICE_INTFLAG_RAMACER (_U_(0x1) << USB_DEVICE_INTFLAG_RAMACER_Pos) +#define USB_DEVICE_INTFLAG_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Not Yet */ +#define USB_DEVICE_INTFLAG_LPMNYET (_U_(0x1) << USB_DEVICE_INTFLAG_LPMNYET_Pos) +#define USB_DEVICE_INTFLAG_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Suspend */ +#define USB_DEVICE_INTFLAG_LPMSUSP (_U_(0x1) << USB_DEVICE_INTFLAG_LPMSUSP_Pos) +#define USB_DEVICE_INTFLAG_MASK _U_(0x03FF) /**< \brief (USB_DEVICE_INTFLAG) MASK Register */ + +/* -------- USB_DEVICE_EPINTSMRY : (USB Offset: 0x020) (R/ 16) DEVICE DEVICE End Point Interrupt Summary -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t EPINT0:1; /*!< bit: 0 End Point 0 Interrupt */ + uint16_t EPINT1:1; /*!< bit: 1 End Point 1 Interrupt */ + uint16_t EPINT2:1; /*!< bit: 2 End Point 2 Interrupt */ + uint16_t EPINT3:1; /*!< bit: 3 End Point 3 Interrupt */ + uint16_t EPINT4:1; /*!< bit: 4 End Point 4 Interrupt */ + uint16_t EPINT5:1; /*!< bit: 5 End Point 5 Interrupt */ + uint16_t EPINT6:1; /*!< bit: 6 End Point 6 Interrupt */ + uint16_t EPINT7:1; /*!< bit: 7 End Point 7 Interrupt */ + uint16_t :8; /*!< bit: 8..15 Reserved */ + } bit; /*!< Structure used for bit access */ + struct { + uint16_t EPINT:8; /*!< bit: 0.. 7 End Point x Interrupt */ + uint16_t :8; /*!< bit: 8..15 Reserved */ + } vec; /*!< Structure used for vec access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPINTSMRY_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPINTSMRY_OFFSET 0x020 /**< \brief (USB_DEVICE_EPINTSMRY offset) DEVICE End Point Interrupt Summary */ +#define USB_DEVICE_EPINTSMRY_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_EPINTSMRY reset_value) DEVICE End Point Interrupt Summary */ + +#define USB_DEVICE_EPINTSMRY_EPINT0_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 0 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT0 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT0_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT1_Pos 1 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 1 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT1 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT1_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT2_Pos 2 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 2 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT2 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT2_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT3_Pos 3 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 3 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT3 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT3_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT4_Pos 4 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 4 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT4 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT4_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT5_Pos 5 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 5 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT5 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT5_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT6_Pos 6 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 6 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT6 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT6_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT7_Pos 7 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 7 Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT7 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT7_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point x Interrupt */ +#define USB_DEVICE_EPINTSMRY_EPINT_Msk (_U_(0xFF) << USB_DEVICE_EPINTSMRY_EPINT_Pos) +#define USB_DEVICE_EPINTSMRY_EPINT(value) (USB_DEVICE_EPINTSMRY_EPINT_Msk & ((value) << USB_DEVICE_EPINTSMRY_EPINT_Pos)) +#define USB_DEVICE_EPINTSMRY_MASK _U_(0x00FF) /**< \brief (USB_DEVICE_EPINTSMRY) MASK Register */ + +/* -------- USB_DESCADD : (USB Offset: 0x024) (R/W 32) Descriptor Address -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint32_t DESCADD:32; /*!< bit: 0..31 Descriptor Address Value */ + } bit; /*!< Structure used for bit access */ + uint32_t reg; /*!< Type used for register access */ +} USB_DESCADD_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DESCADD_OFFSET 0x024 /**< \brief (USB_DESCADD offset) Descriptor Address */ +#define USB_DESCADD_RESETVALUE _U_(0x00000000) /**< \brief (USB_DESCADD reset_value) Descriptor Address */ + +#define USB_DESCADD_DESCADD_Pos 0 /**< \brief (USB_DESCADD) Descriptor Address Value */ +#define USB_DESCADD_DESCADD_Msk (_U_(0xFFFFFFFF) << USB_DESCADD_DESCADD_Pos) +#define USB_DESCADD_DESCADD(value) (USB_DESCADD_DESCADD_Msk & ((value) << USB_DESCADD_DESCADD_Pos)) +#define USB_DESCADD_MASK _U_(0xFFFFFFFF) /**< \brief (USB_DESCADD) MASK Register */ + +/* -------- USB_PADCAL : (USB Offset: 0x028) (R/W 16) USB PAD Calibration -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t TRANSP:5; /*!< bit: 0.. 4 USB Pad Transp calibration */ + uint16_t :1; /*!< bit: 5 Reserved */ + uint16_t TRANSN:5; /*!< bit: 6..10 USB Pad Transn calibration */ + uint16_t :1; /*!< bit: 11 Reserved */ + uint16_t TRIM:3; /*!< bit: 12..14 USB Pad Trim calibration */ + uint16_t :1; /*!< bit: 15 Reserved */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_PADCAL_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_PADCAL_OFFSET 0x028 /**< \brief (USB_PADCAL offset) USB PAD Calibration */ +#define USB_PADCAL_RESETVALUE _U_(0x0000) /**< \brief (USB_PADCAL reset_value) USB PAD Calibration */ + +#define USB_PADCAL_TRANSP_Pos 0 /**< \brief (USB_PADCAL) USB Pad Transp calibration */ +#define USB_PADCAL_TRANSP_Msk (_U_(0x1F) << USB_PADCAL_TRANSP_Pos) +#define USB_PADCAL_TRANSP(value) (USB_PADCAL_TRANSP_Msk & ((value) << USB_PADCAL_TRANSP_Pos)) +#define USB_PADCAL_TRANSN_Pos 6 /**< \brief (USB_PADCAL) USB Pad Transn calibration */ +#define USB_PADCAL_TRANSN_Msk (_U_(0x1F) << USB_PADCAL_TRANSN_Pos) +#define USB_PADCAL_TRANSN(value) (USB_PADCAL_TRANSN_Msk & ((value) << USB_PADCAL_TRANSN_Pos)) +#define USB_PADCAL_TRIM_Pos 12 /**< \brief (USB_PADCAL) USB Pad Trim calibration */ +#define USB_PADCAL_TRIM_Msk (_U_(0x7) << USB_PADCAL_TRIM_Pos) +#define USB_PADCAL_TRIM(value) (USB_PADCAL_TRIM_Msk & ((value) << USB_PADCAL_TRIM_Pos)) +#define USB_PADCAL_MASK _U_(0x77DF) /**< \brief (USB_PADCAL) MASK Register */ + +/* -------- USB_DEVICE_EPCFG : (USB Offset: 0x100) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Configuration -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t EPTYPE0:3; /*!< bit: 0.. 2 End Point Type0 */ + uint8_t :1; /*!< bit: 3 Reserved */ + uint8_t EPTYPE1:3; /*!< bit: 4.. 6 End Point Type1 */ + uint8_t NYETDIS:1; /*!< bit: 7 NYET Token Disable */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPCFG_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPCFG_OFFSET 0x100 /**< \brief (USB_DEVICE_EPCFG offset) DEVICE_ENDPOINT End Point Configuration */ +#define USB_DEVICE_EPCFG_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPCFG reset_value) DEVICE_ENDPOINT End Point Configuration */ + +#define USB_DEVICE_EPCFG_EPTYPE0_Pos 0 /**< \brief (USB_DEVICE_EPCFG) End Point Type0 */ +#define USB_DEVICE_EPCFG_EPTYPE0_Msk (_U_(0x7) << USB_DEVICE_EPCFG_EPTYPE0_Pos) +#define USB_DEVICE_EPCFG_EPTYPE0(value) (USB_DEVICE_EPCFG_EPTYPE0_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE0_Pos)) +#define USB_DEVICE_EPCFG_EPTYPE1_Pos 4 /**< \brief (USB_DEVICE_EPCFG) End Point Type1 */ +#define USB_DEVICE_EPCFG_EPTYPE1_Msk (_U_(0x7) << USB_DEVICE_EPCFG_EPTYPE1_Pos) +#define USB_DEVICE_EPCFG_EPTYPE1(value) (USB_DEVICE_EPCFG_EPTYPE1_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE1_Pos)) +#define USB_DEVICE_EPCFG_NYETDIS_Pos 7 /**< \brief (USB_DEVICE_EPCFG) NYET Token Disable */ +#define USB_DEVICE_EPCFG_NYETDIS (_U_(0x1) << USB_DEVICE_EPCFG_NYETDIS_Pos) +#define USB_DEVICE_EPCFG_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPCFG) MASK Register */ + +/* -------- USB_DEVICE_EPSTATUSCLR : (USB Offset: 0x104) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Clear -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Clear */ + uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Clear */ + uint8_t CURBK:1; /*!< bit: 2 Current Bank Clear */ + uint8_t :1; /*!< bit: 3 Reserved */ + uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Clear */ + uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Clear */ + uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Clear */ + uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Clear */ + } bit; /*!< Structure used for bit access */ + struct { + uint8_t :4; /*!< bit: 0.. 3 Reserved */ + uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Clear */ + uint8_t :2; /*!< bit: 6.. 7 Reserved */ + } vec; /*!< Structure used for vec access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPSTATUSCLR_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPSTATUSCLR_OFFSET 0x104 /**< \brief (USB_DEVICE_EPSTATUSCLR offset) DEVICE_ENDPOINT End Point Pipe Status Clear */ +#define USB_DEVICE_EPSTATUSCLR_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPSTATUSCLR reset_value) DEVICE_ENDPOINT End Point Pipe Status Clear */ + +#define USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle OUT Clear */ +#define USB_DEVICE_EPSTATUSCLR_DTGLOUT (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos) +#define USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle IN Clear */ +#define USB_DEVICE_EPSTATUSCLR_DTGLIN (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos) +#define USB_DEVICE_EPSTATUSCLR_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSCLR) Current Bank Clear */ +#define USB_DEVICE_EPSTATUSCLR_CURBK (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_CURBK_Pos) +#define USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 0 Request Clear */ +#define USB_DEVICE_EPSTATUSCLR_STALLRQ0 (_U_(1) << USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos) +#define USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 1 Request Clear */ +#define USB_DEVICE_EPSTATUSCLR_STALLRQ1 (_U_(1) << USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos) +#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall x Request Clear */ +#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk (_U_(0x3) << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos) +#define USB_DEVICE_EPSTATUSCLR_STALLRQ(value) (USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos)) +#define USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 0 Ready Clear */ +#define USB_DEVICE_EPSTATUSCLR_BK0RDY (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos) +#define USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 1 Ready Clear */ +#define USB_DEVICE_EPSTATUSCLR_BK1RDY (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos) +#define USB_DEVICE_EPSTATUSCLR_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPSTATUSCLR) MASK Register */ + +/* -------- USB_DEVICE_EPSTATUSSET : (USB Offset: 0x105) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Set -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Set */ + uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Set */ + uint8_t CURBK:1; /*!< bit: 2 Current Bank Set */ + uint8_t :1; /*!< bit: 3 Reserved */ + uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Set */ + uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Set */ + uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Set */ + uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Set */ + } bit; /*!< Structure used for bit access */ + struct { + uint8_t :4; /*!< bit: 0.. 3 Reserved */ + uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Set */ + uint8_t :2; /*!< bit: 6.. 7 Reserved */ + } vec; /*!< Structure used for vec access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPSTATUSSET_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPSTATUSSET_OFFSET 0x105 /**< \brief (USB_DEVICE_EPSTATUSSET offset) DEVICE_ENDPOINT End Point Pipe Status Set */ +#define USB_DEVICE_EPSTATUSSET_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPSTATUSSET reset_value) DEVICE_ENDPOINT End Point Pipe Status Set */ + +#define USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle OUT Set */ +#define USB_DEVICE_EPSTATUSSET_DTGLOUT (_U_(0x1) << USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos) +#define USB_DEVICE_EPSTATUSSET_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle IN Set */ +#define USB_DEVICE_EPSTATUSSET_DTGLIN (_U_(0x1) << USB_DEVICE_EPSTATUSSET_DTGLIN_Pos) +#define USB_DEVICE_EPSTATUSSET_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSSET) Current Bank Set */ +#define USB_DEVICE_EPSTATUSSET_CURBK (_U_(0x1) << USB_DEVICE_EPSTATUSSET_CURBK_Pos) +#define USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 0 Request Set */ +#define USB_DEVICE_EPSTATUSSET_STALLRQ0 (_U_(1) << USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos) +#define USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 1 Request Set */ +#define USB_DEVICE_EPSTATUSSET_STALLRQ1 (_U_(1) << USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos) +#define USB_DEVICE_EPSTATUSSET_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall x Request Set */ +#define USB_DEVICE_EPSTATUSSET_STALLRQ_Msk (_U_(0x3) << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos) +#define USB_DEVICE_EPSTATUSSET_STALLRQ(value) (USB_DEVICE_EPSTATUSSET_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos)) +#define USB_DEVICE_EPSTATUSSET_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 0 Ready Set */ +#define USB_DEVICE_EPSTATUSSET_BK0RDY (_U_(0x1) << USB_DEVICE_EPSTATUSSET_BK0RDY_Pos) +#define USB_DEVICE_EPSTATUSSET_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 1 Ready Set */ +#define USB_DEVICE_EPSTATUSSET_BK1RDY (_U_(0x1) << USB_DEVICE_EPSTATUSSET_BK1RDY_Pos) +#define USB_DEVICE_EPSTATUSSET_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPSTATUSSET) MASK Register */ + +/* -------- USB_DEVICE_EPSTATUS : (USB Offset: 0x106) (R/ 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle Out */ + uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle In */ + uint8_t CURBK:1; /*!< bit: 2 Current Bank */ + uint8_t :1; /*!< bit: 3 Reserved */ + uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request */ + uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request */ + uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 ready */ + uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 ready */ + } bit; /*!< Structure used for bit access */ + struct { + uint8_t :4; /*!< bit: 0.. 3 Reserved */ + uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request */ + uint8_t :2; /*!< bit: 6.. 7 Reserved */ + } vec; /*!< Structure used for vec access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPSTATUS_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPSTATUS_OFFSET 0x106 /**< \brief (USB_DEVICE_EPSTATUS offset) DEVICE_ENDPOINT End Point Pipe Status */ +#define USB_DEVICE_EPSTATUS_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPSTATUS reset_value) DEVICE_ENDPOINT End Point Pipe Status */ + +#define USB_DEVICE_EPSTATUS_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle Out */ +#define USB_DEVICE_EPSTATUS_DTGLOUT (_U_(0x1) << USB_DEVICE_EPSTATUS_DTGLOUT_Pos) +#define USB_DEVICE_EPSTATUS_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle In */ +#define USB_DEVICE_EPSTATUS_DTGLIN (_U_(0x1) << USB_DEVICE_EPSTATUS_DTGLIN_Pos) +#define USB_DEVICE_EPSTATUS_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUS) Current Bank */ +#define USB_DEVICE_EPSTATUS_CURBK (_U_(0x1) << USB_DEVICE_EPSTATUS_CURBK_Pos) +#define USB_DEVICE_EPSTATUS_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall 0 Request */ +#define USB_DEVICE_EPSTATUS_STALLRQ0 (_U_(1) << USB_DEVICE_EPSTATUS_STALLRQ0_Pos) +#define USB_DEVICE_EPSTATUS_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUS) Stall 1 Request */ +#define USB_DEVICE_EPSTATUS_STALLRQ1 (_U_(1) << USB_DEVICE_EPSTATUS_STALLRQ1_Pos) +#define USB_DEVICE_EPSTATUS_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall x Request */ +#define USB_DEVICE_EPSTATUS_STALLRQ_Msk (_U_(0x3) << USB_DEVICE_EPSTATUS_STALLRQ_Pos) +#define USB_DEVICE_EPSTATUS_STALLRQ(value) (USB_DEVICE_EPSTATUS_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUS_STALLRQ_Pos)) +#define USB_DEVICE_EPSTATUS_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUS) Bank 0 ready */ +#define USB_DEVICE_EPSTATUS_BK0RDY (_U_(0x1) << USB_DEVICE_EPSTATUS_BK0RDY_Pos) +#define USB_DEVICE_EPSTATUS_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUS) Bank 1 ready */ +#define USB_DEVICE_EPSTATUS_BK1RDY (_U_(0x1) << USB_DEVICE_EPSTATUS_BK1RDY_Pos) +#define USB_DEVICE_EPSTATUS_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPSTATUS) MASK Register */ + +/* -------- USB_DEVICE_EPINTFLAG : (USB Offset: 0x107) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Flag -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { // __I to avoid read-modify-write on write-to-clear register + struct { + __I uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 */ + __I uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 */ + __I uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 */ + __I uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 */ + __I uint8_t RXSTP:1; /*!< bit: 4 Received Setup */ + __I uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out */ + __I uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out */ + __I uint8_t :1; /*!< bit: 7 Reserved */ + } bit; /*!< Structure used for bit access */ + struct { + __I uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x */ + __I uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x */ + __I uint8_t :1; /*!< bit: 4 Reserved */ + __I uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out */ + __I uint8_t :1; /*!< bit: 7 Reserved */ + } vec; /*!< Structure used for vec access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPINTFLAG_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPINTFLAG_OFFSET 0x107 /**< \brief (USB_DEVICE_EPINTFLAG offset) DEVICE_ENDPOINT End Point Interrupt Flag */ +#define USB_DEVICE_EPINTFLAG_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPINTFLAG reset_value) DEVICE_ENDPOINT End Point Interrupt Flag */ + +#define USB_DEVICE_EPINTFLAG_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 0 */ +#define USB_DEVICE_EPINTFLAG_TRCPT0 (_U_(1) << USB_DEVICE_EPINTFLAG_TRCPT0_Pos) +#define USB_DEVICE_EPINTFLAG_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 1 */ +#define USB_DEVICE_EPINTFLAG_TRCPT1 (_U_(1) << USB_DEVICE_EPINTFLAG_TRCPT1_Pos) +#define USB_DEVICE_EPINTFLAG_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete x */ +#define USB_DEVICE_EPINTFLAG_TRCPT_Msk (_U_(0x3) << USB_DEVICE_EPINTFLAG_TRCPT_Pos) +#define USB_DEVICE_EPINTFLAG_TRCPT(value) (USB_DEVICE_EPINTFLAG_TRCPT_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRCPT_Pos)) +#define USB_DEVICE_EPINTFLAG_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 0 */ +#define USB_DEVICE_EPINTFLAG_TRFAIL0 (_U_(1) << USB_DEVICE_EPINTFLAG_TRFAIL0_Pos) +#define USB_DEVICE_EPINTFLAG_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 1 */ +#define USB_DEVICE_EPINTFLAG_TRFAIL1 (_U_(1) << USB_DEVICE_EPINTFLAG_TRFAIL1_Pos) +#define USB_DEVICE_EPINTFLAG_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow x */ +#define USB_DEVICE_EPINTFLAG_TRFAIL_Msk (_U_(0x3) << USB_DEVICE_EPINTFLAG_TRFAIL_Pos) +#define USB_DEVICE_EPINTFLAG_TRFAIL(value) (USB_DEVICE_EPINTFLAG_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRFAIL_Pos)) +#define USB_DEVICE_EPINTFLAG_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTFLAG) Received Setup */ +#define USB_DEVICE_EPINTFLAG_RXSTP (_U_(0x1) << USB_DEVICE_EPINTFLAG_RXSTP_Pos) +#define USB_DEVICE_EPINTFLAG_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 0 In/out */ +#define USB_DEVICE_EPINTFLAG_STALL0 (_U_(1) << USB_DEVICE_EPINTFLAG_STALL0_Pos) +#define USB_DEVICE_EPINTFLAG_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 1 In/out */ +#define USB_DEVICE_EPINTFLAG_STALL1 (_U_(1) << USB_DEVICE_EPINTFLAG_STALL1_Pos) +#define USB_DEVICE_EPINTFLAG_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall x In/out */ +#define USB_DEVICE_EPINTFLAG_STALL_Msk (_U_(0x3) << USB_DEVICE_EPINTFLAG_STALL_Pos) +#define USB_DEVICE_EPINTFLAG_STALL(value) (USB_DEVICE_EPINTFLAG_STALL_Msk & ((value) << USB_DEVICE_EPINTFLAG_STALL_Pos)) +#define USB_DEVICE_EPINTFLAG_MASK _U_(0x7F) /**< \brief (USB_DEVICE_EPINTFLAG) MASK Register */ + +/* -------- USB_DEVICE_EPINTENCLR : (USB Offset: 0x108) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Clear Flag -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Disable */ + uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Disable */ + uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Disable */ + uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Disable */ + uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Disable */ + uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/Out Interrupt Disable */ + uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/Out Interrupt Disable */ + uint8_t :1; /*!< bit: 7 Reserved */ + } bit; /*!< Structure used for bit access */ + struct { + uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Disable */ + uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Disable */ + uint8_t :1; /*!< bit: 4 Reserved */ + uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/Out Interrupt Disable */ + uint8_t :1; /*!< bit: 7 Reserved */ + } vec; /*!< Structure used for vec access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPINTENCLR_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPINTENCLR_OFFSET 0x108 /**< \brief (USB_DEVICE_EPINTENCLR offset) DEVICE_ENDPOINT End Point Interrupt Clear Flag */ +#define USB_DEVICE_EPINTENCLR_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPINTENCLR reset_value) DEVICE_ENDPOINT End Point Interrupt Clear Flag */ + +#define USB_DEVICE_EPINTENCLR_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 0 Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_TRCPT0 (_U_(1) << USB_DEVICE_EPINTENCLR_TRCPT0_Pos) +#define USB_DEVICE_EPINTENCLR_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 1 Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_TRCPT1 (_U_(1) << USB_DEVICE_EPINTENCLR_TRCPT1_Pos) +#define USB_DEVICE_EPINTENCLR_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete x Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_TRCPT_Msk (_U_(0x3) << USB_DEVICE_EPINTENCLR_TRCPT_Pos) +#define USB_DEVICE_EPINTENCLR_TRCPT(value) (USB_DEVICE_EPINTENCLR_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRCPT_Pos)) +#define USB_DEVICE_EPINTENCLR_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 0 Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_TRFAIL0 (_U_(1) << USB_DEVICE_EPINTENCLR_TRFAIL0_Pos) +#define USB_DEVICE_EPINTENCLR_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 1 Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_TRFAIL1 (_U_(1) << USB_DEVICE_EPINTENCLR_TRFAIL1_Pos) +#define USB_DEVICE_EPINTENCLR_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow x Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_TRFAIL_Msk (_U_(0x3) << USB_DEVICE_EPINTENCLR_TRFAIL_Pos) +#define USB_DEVICE_EPINTENCLR_TRFAIL(value) (USB_DEVICE_EPINTENCLR_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRFAIL_Pos)) +#define USB_DEVICE_EPINTENCLR_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENCLR) Received Setup Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_RXSTP (_U_(0x1) << USB_DEVICE_EPINTENCLR_RXSTP_Pos) +#define USB_DEVICE_EPINTENCLR_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 0 In/Out Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_STALL0 (_U_(1) << USB_DEVICE_EPINTENCLR_STALL0_Pos) +#define USB_DEVICE_EPINTENCLR_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 1 In/Out Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_STALL1 (_U_(1) << USB_DEVICE_EPINTENCLR_STALL1_Pos) +#define USB_DEVICE_EPINTENCLR_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall x In/Out Interrupt Disable */ +#define USB_DEVICE_EPINTENCLR_STALL_Msk (_U_(0x3) << USB_DEVICE_EPINTENCLR_STALL_Pos) +#define USB_DEVICE_EPINTENCLR_STALL(value) (USB_DEVICE_EPINTENCLR_STALL_Msk & ((value) << USB_DEVICE_EPINTENCLR_STALL_Pos)) +#define USB_DEVICE_EPINTENCLR_MASK _U_(0x7F) /**< \brief (USB_DEVICE_EPINTENCLR) MASK Register */ + +/* -------- USB_DEVICE_EPINTENSET : (USB Offset: 0x109) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Set Flag -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Enable */ + uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Enable */ + uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Enable */ + uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Enable */ + uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Enable */ + uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out Interrupt enable */ + uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out Interrupt enable */ + uint8_t :1; /*!< bit: 7 Reserved */ + } bit; /*!< Structure used for bit access */ + struct { + uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Enable */ + uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Enable */ + uint8_t :1; /*!< bit: 4 Reserved */ + uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out Interrupt enable */ + uint8_t :1; /*!< bit: 7 Reserved */ + } vec; /*!< Structure used for vec access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_EPINTENSET_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EPINTENSET_OFFSET 0x109 /**< \brief (USB_DEVICE_EPINTENSET offset) DEVICE_ENDPOINT End Point Interrupt Set Flag */ +#define USB_DEVICE_EPINTENSET_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPINTENSET reset_value) DEVICE_ENDPOINT End Point Interrupt Set Flag */ + +#define USB_DEVICE_EPINTENSET_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 0 Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_TRCPT0 (_U_(1) << USB_DEVICE_EPINTENSET_TRCPT0_Pos) +#define USB_DEVICE_EPINTENSET_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 1 Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_TRCPT1 (_U_(1) << USB_DEVICE_EPINTENSET_TRCPT1_Pos) +#define USB_DEVICE_EPINTENSET_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete x Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_TRCPT_Msk (_U_(0x3) << USB_DEVICE_EPINTENSET_TRCPT_Pos) +#define USB_DEVICE_EPINTENSET_TRCPT(value) (USB_DEVICE_EPINTENSET_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENSET_TRCPT_Pos)) +#define USB_DEVICE_EPINTENSET_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 0 Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_TRFAIL0 (_U_(1) << USB_DEVICE_EPINTENSET_TRFAIL0_Pos) +#define USB_DEVICE_EPINTENSET_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 1 Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_TRFAIL1 (_U_(1) << USB_DEVICE_EPINTENSET_TRFAIL1_Pos) +#define USB_DEVICE_EPINTENSET_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow x Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_TRFAIL_Msk (_U_(0x3) << USB_DEVICE_EPINTENSET_TRFAIL_Pos) +#define USB_DEVICE_EPINTENSET_TRFAIL(value) (USB_DEVICE_EPINTENSET_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENSET_TRFAIL_Pos)) +#define USB_DEVICE_EPINTENSET_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENSET) Received Setup Interrupt Enable */ +#define USB_DEVICE_EPINTENSET_RXSTP (_U_(0x1) << USB_DEVICE_EPINTENSET_RXSTP_Pos) +#define USB_DEVICE_EPINTENSET_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall 0 In/out Interrupt enable */ +#define USB_DEVICE_EPINTENSET_STALL0 (_U_(1) << USB_DEVICE_EPINTENSET_STALL0_Pos) +#define USB_DEVICE_EPINTENSET_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENSET) Stall 1 In/out Interrupt enable */ +#define USB_DEVICE_EPINTENSET_STALL1 (_U_(1) << USB_DEVICE_EPINTENSET_STALL1_Pos) +#define USB_DEVICE_EPINTENSET_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall x In/out Interrupt enable */ +#define USB_DEVICE_EPINTENSET_STALL_Msk (_U_(0x3) << USB_DEVICE_EPINTENSET_STALL_Pos) +#define USB_DEVICE_EPINTENSET_STALL(value) (USB_DEVICE_EPINTENSET_STALL_Msk & ((value) << USB_DEVICE_EPINTENSET_STALL_Pos)) +#define USB_DEVICE_EPINTENSET_MASK _U_(0x7F) /**< \brief (USB_DEVICE_EPINTENSET) MASK Register */ + +/* -------- USB_DEVICE_ADDR : (USB Offset: 0x000) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint32_t ADDR:32; /*!< bit: 0..31 Adress of data buffer */ + } bit; /*!< Structure used for bit access */ + uint32_t reg; /*!< Type used for register access */ +} USB_DEVICE_ADDR_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_ADDR_OFFSET 0x000 /**< \brief (USB_DEVICE_ADDR offset) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */ + +#define USB_DEVICE_ADDR_ADDR_Pos 0 /**< \brief (USB_DEVICE_ADDR) Adress of data buffer */ +#define USB_DEVICE_ADDR_ADDR_Msk (_U_(0xFFFFFFFF) << USB_DEVICE_ADDR_ADDR_Pos) +#define USB_DEVICE_ADDR_ADDR(value) (USB_DEVICE_ADDR_ADDR_Msk & ((value) << USB_DEVICE_ADDR_ADDR_Pos)) +#define USB_DEVICE_ADDR_MASK _U_(0xFFFFFFFF) /**< \brief (USB_DEVICE_ADDR) MASK Register */ + +/* -------- USB_DEVICE_PCKSIZE : (USB Offset: 0x004) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Packet Size -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint32_t BYTE_COUNT:14; /*!< bit: 0..13 Byte Count */ + uint32_t MULTI_PACKET_SIZE:14; /*!< bit: 14..27 Multi Packet In or Out size */ + uint32_t SIZE:3; /*!< bit: 28..30 Enpoint size */ + uint32_t AUTO_ZLP:1; /*!< bit: 31 Automatic Zero Length Packet */ + } bit; /*!< Structure used for bit access */ + uint32_t reg; /*!< Type used for register access */ +} USB_DEVICE_PCKSIZE_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_PCKSIZE_OFFSET 0x004 /**< \brief (USB_DEVICE_PCKSIZE offset) DEVICE_DESC_BANK Endpoint Bank, Packet Size */ + +#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos 0 /**< \brief (USB_DEVICE_PCKSIZE) Byte Count */ +#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk (_U_(0x3FFF) << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos) +#define USB_DEVICE_PCKSIZE_BYTE_COUNT(value) (USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk & ((value) << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos)) +#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos 14 /**< \brief (USB_DEVICE_PCKSIZE) Multi Packet In or Out size */ +#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk (_U_(0x3FFF) << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos) +#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE(value) (USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos)) +#define USB_DEVICE_PCKSIZE_SIZE_Pos 28 /**< \brief (USB_DEVICE_PCKSIZE) Enpoint size */ +#define USB_DEVICE_PCKSIZE_SIZE_Msk (_U_(0x7) << USB_DEVICE_PCKSIZE_SIZE_Pos) +#define USB_DEVICE_PCKSIZE_SIZE(value) (USB_DEVICE_PCKSIZE_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_SIZE_Pos)) +#define USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos 31 /**< \brief (USB_DEVICE_PCKSIZE) Automatic Zero Length Packet */ +#define USB_DEVICE_PCKSIZE_AUTO_ZLP (_U_(0x1) << USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos) +#define USB_DEVICE_PCKSIZE_MASK _U_(0xFFFFFFFF) /**< \brief (USB_DEVICE_PCKSIZE) MASK Register */ + +/* -------- USB_DEVICE_EXTREG : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE_DESC_BANK Endpoint Bank, Extended -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint16_t SUBPID:4; /*!< bit: 0.. 3 SUBPID field send with extended token */ + uint16_t VARIABLE:11; /*!< bit: 4..14 Variable field send with extended token */ + uint16_t :1; /*!< bit: 15 Reserved */ + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB_DEVICE_EXTREG_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_EXTREG_OFFSET 0x008 /**< \brief (USB_DEVICE_EXTREG offset) DEVICE_DESC_BANK Endpoint Bank, Extended */ + +#define USB_DEVICE_EXTREG_SUBPID_Pos 0 /**< \brief (USB_DEVICE_EXTREG) SUBPID field send with extended token */ +#define USB_DEVICE_EXTREG_SUBPID_Msk (_U_(0xF) << USB_DEVICE_EXTREG_SUBPID_Pos) +#define USB_DEVICE_EXTREG_SUBPID(value) (USB_DEVICE_EXTREG_SUBPID_Msk & ((value) << USB_DEVICE_EXTREG_SUBPID_Pos)) +#define USB_DEVICE_EXTREG_VARIABLE_Pos 4 /**< \brief (USB_DEVICE_EXTREG) Variable field send with extended token */ +#define USB_DEVICE_EXTREG_VARIABLE_Msk (_U_(0x7FF) << USB_DEVICE_EXTREG_VARIABLE_Pos) +#define USB_DEVICE_EXTREG_VARIABLE(value) (USB_DEVICE_EXTREG_VARIABLE_Msk & ((value) << USB_DEVICE_EXTREG_VARIABLE_Pos)) +#define USB_DEVICE_EXTREG_MASK _U_(0x7FFF) /**< \brief (USB_DEVICE_EXTREG) MASK Register */ + +/* -------- USB_DEVICE_STATUS_BK : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE_DESC_BANK Enpoint Bank, Status of Bank -------- */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + struct { + uint8_t CRCERR:1; /*!< bit: 0 CRC Error Status */ + uint8_t ERRORFLOW:1; /*!< bit: 1 Error Flow Status */ + uint8_t :6; /*!< bit: 2.. 7 Reserved */ + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB_DEVICE_STATUS_BK_Type; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#define USB_DEVICE_STATUS_BK_OFFSET 0x00A /**< \brief (USB_DEVICE_STATUS_BK offset) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */ + +#define USB_DEVICE_STATUS_BK_CRCERR_Pos 0 /**< \brief (USB_DEVICE_STATUS_BK) CRC Error Status */ +#define USB_DEVICE_STATUS_BK_CRCERR (_U_(0x1) << USB_DEVICE_STATUS_BK_CRCERR_Pos) +#define USB_DEVICE_STATUS_BK_ERRORFLOW_Pos 1 /**< \brief (USB_DEVICE_STATUS_BK) Error Flow Status */ +#define USB_DEVICE_STATUS_BK_ERRORFLOW (_U_(0x1) << USB_DEVICE_STATUS_BK_ERRORFLOW_Pos) +#define USB_DEVICE_STATUS_BK_MASK _U_(0x03) /**< \brief (USB_DEVICE_STATUS_BK) MASK Register */ + +/** \brief UsbDeviceDescBank SRAM registers */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef struct { + __IO USB_DEVICE_ADDR_Type ADDR; /**< \brief Offset: 0x000 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */ + __IO USB_DEVICE_PCKSIZE_Type PCKSIZE; /**< \brief Offset: 0x004 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Packet Size */ + __IO USB_DEVICE_EXTREG_Type EXTREG; /**< \brief Offset: 0x008 (R/W 16) DEVICE_DESC_BANK Endpoint Bank, Extended */ + __IO USB_DEVICE_STATUS_BK_Type STATUS_BK; /**< \brief Offset: 0x00A (R/W 8) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */ + RoReg8 Reserved1[0x5]; +} UsbDeviceDescBank; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/** \brief UsbDeviceEndpoint hardware registers */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef struct { + __IO USB_DEVICE_EPCFG_Type EPCFG; /**< \brief Offset: 0x000 (R/W 8) DEVICE_ENDPOINT End Point Configuration */ + RoReg8 Reserved1[0x3]; + __O USB_DEVICE_EPSTATUSCLR_Type EPSTATUSCLR; /**< \brief Offset: 0x004 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Clear */ + __O USB_DEVICE_EPSTATUSSET_Type EPSTATUSSET; /**< \brief Offset: 0x005 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Set */ + __I USB_DEVICE_EPSTATUS_Type EPSTATUS; /**< \brief Offset: 0x006 (R/ 8) DEVICE_ENDPOINT End Point Pipe Status */ + __IO USB_DEVICE_EPINTFLAG_Type EPINTFLAG; /**< \brief Offset: 0x007 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Flag */ + __IO USB_DEVICE_EPINTENCLR_Type EPINTENCLR; /**< \brief Offset: 0x008 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Clear Flag */ + __IO USB_DEVICE_EPINTENSET_Type EPINTENSET; /**< \brief Offset: 0x009 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Set Flag */ + RoReg8 Reserved2[0x16]; +} UsbDeviceEndpoint; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/** \brief USB_DEVICE APB hardware registers */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef struct { /* USB is Device */ + __IO USB_CTRLA_Type CTRLA; /**< \brief Offset: 0x000 (R/W 8) Control A */ + RoReg8 Reserved1[0x1]; + __I USB_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x002 (R/ 8) Synchronization Busy */ + __IO USB_QOSCTRL_Type QOSCTRL; /**< \brief Offset: 0x003 (R/W 8) USB Quality Of Service */ + RoReg8 Reserved2[0x4]; + __IO USB_DEVICE_CTRLB_Type CTRLB; /**< \brief Offset: 0x008 (R/W 16) DEVICE Control B */ + __IO USB_DEVICE_DADD_Type DADD; /**< \brief Offset: 0x00A (R/W 8) DEVICE Device Address */ + RoReg8 Reserved3[0x1]; + __I USB_DEVICE_STATUS_Type STATUS; /**< \brief Offset: 0x00C (R/ 8) DEVICE Status */ + __I USB_FSMSTATUS_Type FSMSTATUS; /**< \brief Offset: 0x00D (R/ 8) Finite State Machine Status */ + RoReg8 Reserved4[0x2]; + __I USB_DEVICE_FNUM_Type FNUM; /**< \brief Offset: 0x010 (R/ 16) DEVICE Device Frame Number */ + RoReg8 Reserved5[0x2]; + __IO USB_DEVICE_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x014 (R/W 16) DEVICE Device Interrupt Enable Clear */ + RoReg8 Reserved6[0x2]; + __IO USB_DEVICE_INTENSET_Type INTENSET; /**< \brief Offset: 0x018 (R/W 16) DEVICE Device Interrupt Enable Set */ + RoReg8 Reserved7[0x2]; + __IO USB_DEVICE_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x01C (R/W 16) DEVICE Device Interrupt Flag */ + RoReg8 Reserved8[0x2]; + __I USB_DEVICE_EPINTSMRY_Type EPINTSMRY; /**< \brief Offset: 0x020 (R/ 16) DEVICE End Point Interrupt Summary */ + RoReg8 Reserved9[0x2]; + __IO USB_DESCADD_Type DESCADD; /**< \brief Offset: 0x024 (R/W 32) Descriptor Address */ + __IO USB_PADCAL_Type PADCAL; /**< \brief Offset: 0x028 (R/W 16) USB PAD Calibration */ + RoReg8 Reserved10[0xD6]; + UsbDeviceEndpoint DeviceEndpoint[8]; /**< \brief Offset: 0x100 UsbDeviceEndpoint groups [EPT_NUM] */ +} UsbDevice; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/** \brief USB_DEVICE Descriptor SRAM registers */ +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef struct { /* USB is Device */ + UsbDeviceDescBank DeviceDescBank[2]; /**< \brief Offset: 0x000 UsbDeviceDescBank groups */ +} UsbDeviceDescriptor; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#ifdef __GNUC__ + #define SECTION_USB_DESCRIPTOR __attribute__ ((section(".hsram"))) +#elif defined(__ICCARM__) + #define SECTION_USB_DESCRIPTOR @".hsram" +#endif + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +typedef union { + UsbDevice DEVICE; /**< \brief Offset: 0x000 USB is Device */ +} Usb; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/*@}*/ + +#endif /* _SAML22_USB_COMPONENT_ */ |