diff options
| -rw-r--r-- | apps/accelerometer-test/app.c | 46 | ||||
| -rw-r--r-- | make.mk | 1 | ||||
| -rw-r--r-- | watch-library/driver/lis2dw.c | 121 | ||||
| -rw-r--r-- | watch-library/driver/lis2dw.h | 280 |
4 files changed, 415 insertions, 33 deletions
diff --git a/apps/accelerometer-test/app.c b/apps/accelerometer-test/app.c index 8bd6537e..bfef132c 100644 --- a/apps/accelerometer-test/app.c +++ b/apps/accelerometer-test/app.c @@ -3,21 +3,15 @@ #include <stdlib.h> #include <math.h> #include "watch.h" -#include "lis2dh.h" +#include "lis2dw.h" -// This application displays data from the old Sensor Watch Motion sensor board. -// Note that this board required A0 to be set high to power the sensor. -// Future accelerometer boards will be powered directly from VCC. -// Also note that this board has its INT1 pin wired to A1, which is not an external -// wake pin. Future accelerometer boards will wire interrupt pins to A2 and A4. - -void cb_light_pressed(void) { +static void cb_light_pressed(void) { } -void cb_mode_pressed(void) { +static void cb_mode_pressed(void) { } -void cb_alarm_pressed(void) { +static void cb_alarm_pressed(void) { } uint8_t interrupts = 0; @@ -25,23 +19,16 @@ uint8_t last_interrupts = 0; uint8_t ticks = 0; char buf[13] = {0}; -void cb_interrupt_1(void) { - interrupts++; -} +static void cb_tick(void) { + if (!lis2dw_have_new_data()) return; -void cb_tick(void) { - if (++ticks == 30) { - last_interrupts = interrupts; - interrupts = 0; - ticks = 0; - } + lis2dw_reading raw_reading; + lis2dw_acceleration_measurement measurement = lis2dw_get_acceleration_measurement(&raw_reading); + (void)measurement; + printf("%d, %d, %d\n", raw_reading.x, raw_reading.y, raw_reading.z); } void app_init(void) { - gpio_set_pin_direction(A0, GPIO_DIRECTION_OUT); - gpio_set_pin_function(A0, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_level(A0, true); - watch_enable_display(); watch_display_string("IN 0 0 0", 0); @@ -51,17 +38,9 @@ void app_init(void) { watch_register_interrupt_callback(BTN_ALARM, cb_alarm_pressed, INTERRUPT_TRIGGER_RISING); watch_enable_i2c(); + lis2dw_begin(); - lis2dh_begin(); - lis2dh_set_data_rate(LIS2DH_DATA_RATE_10_HZ); - lis2dh_configure_aoi_int1( - LIS2DH_INTERRUPT_CONFIGURATION_OR | - LIS2DH_INTERRUPT_CONFIGURATION_X_HIGH_ENABLE | - LIS2DH_INTERRUPT_CONFIGURATION_Y_HIGH_ENABLE | - LIS2DH_INTERRUPT_CONFIGURATION_Z_HIGH_ENABLE, 96, 0, true); - - watch_register_interrupt_callback(A1, cb_interrupt_1, INTERRUPT_TRIGGER_RISING); - watch_rtc_register_tick_callback(cb_tick); + watch_rtc_register_periodic_callback(cb_tick, 16); } void app_wake_from_backup(void) { @@ -77,6 +56,7 @@ void app_wake_from_standby(void) { } bool app_loop(void) { + // TODO: interrupt configuration for LIS2DW sprintf(buf, "IN%2d%3d%3d", ticks, interrupts, last_interrupts); watch_display_string(buf, 0); @@ -115,6 +115,7 @@ SRCS += \ $(TOP)/watch-library/hpl/slcd/hpl_slcd.c \ $(TOP)/watch-library/hpl/systick/hpl_systick.c \ $(TOP)/watch-library/driver/lis2dh.c \ + $(TOP)/watch-library/driver/lis2dW.c \ DEFINES += \ -D__SAML22J18A__ \ diff --git a/watch-library/driver/lis2dw.c b/watch-library/driver/lis2dw.c new file mode 100644 index 00000000..73b54aaf --- /dev/null +++ b/watch-library/driver/lis2dw.c @@ -0,0 +1,121 @@ +/* + * MIT License + * + * Copyright (c) 2021 Joey Castillo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "lis2dw.h" +#include "watch.h" + +bool lis2dw_begin(void) { + if (lis2dw_get_device_id() != LIS2DW_WHO_AM_I_VAL) { + return false; + } + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL2, LIS2DW_CTRL2_VAL_BOOT); + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL2, LIS2DW_CTRL2_VAL_SOFT_RESET); + // Start at 100 Hz data rate + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL1, LIS2DW_CTRL1_VAL_ODR_100HZ | LIS2DW_CTRL1_VAL_MODE_HIGH_PERFORMANCE); + // Enable block data update (output registers not updated until MSB and LSB have been read) and address autoincrement + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL2, LIS2DW_CTRL2_VAL_BDU | LIS2DW_CTRL2_VAL_IF_ADD_INC); + // Set range to ±2G + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL6, LIS2DW_CTRL6_VAL_RANGE_2G); + + return true; +} + +uint8_t lis2dw_get_device_id(void) { + return watch_i2c_read8(LIS2DW_ADDRESS, LIS2DW_REG_WHO_AM_I); +} + +bool lis2dw_have_new_data(void) { + uint8_t retval = watch_i2c_read8(LIS2DW_ADDRESS, LIS2DW_REG_STATUS); + return retval & LIS2DW_STATUS_VAL_DRDY; +} + +lis2dw_reading lis2dw_get_raw_reading(void) { + uint8_t buffer[6]; + uint8_t reg = LIS2DW_REG_OUT_X_L | 0x80; // set high bit for consecutive reads + lis2dw_reading retval; + + watch_i2c_send(LIS2DW_ADDRESS, ®, 1); + watch_i2c_receive(LIS2DW_ADDRESS, (uint8_t *)&buffer, 6); + + retval.x = buffer[0]; + retval.x |= ((uint16_t)buffer[1]) << 8; + retval.y = buffer[2]; + retval.y |= ((uint16_t)buffer[3]) << 8; + retval.z = buffer[4]; + retval.z |= ((uint16_t)buffer[5]) << 8; + + retval.x >>= 2; + retval.y >>= 2; + retval.z >>= 2; + + return retval; +} + + lis2dw_acceleration_measurement lis2dw_get_acceleration_measurement(lis2dw_reading *out_reading) { + lis2dw_reading reading = lis2dw_get_raw_reading(); + uint8_t range = lis2dw_get_range(); + if (out_reading != NULL) *out_reading = reading; + + // this bit is cribbed from Adafruit's LIS3DH driver; from their notes, the magic number below + // converts from 16-bit lsb to 10-bit and divides by 1k to convert from milli-gs. + // final value is raw_lsb => 10-bit lsb -> milli-gs -> gs + uint8_t lsb_value = 1; + if (range == LIS2DW_RANGE_2_G) lsb_value = 4; + if (range == LIS2DW_RANGE_4_G) lsb_value = 8; + if (range == LIS2DW_RANGE_8_G) lsb_value = 16; + if (range == LIS2DW_RANGE_16_G) lsb_value = 48; + + lis2dw_acceleration_measurement retval; + + retval.x = lsb_value * ((float)reading.x / 64000.0); + retval.y = lsb_value * ((float)reading.y / 64000.0); + retval.z = lsb_value * ((float)reading.z / 64000.0); + + return retval; +} + +void lis2dw_set_range(lis2dw_range_t range) { + uint8_t val = watch_i2c_read8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL4) & 0xCF; + uint8_t bits = range << 4; + + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL4, val | bits); +} + +lis2dw_range_t lis2dw_get_range(void) { + uint8_t retval = watch_i2c_read8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL4) & 0x30; + retval >>= 4; + return (lis2dw_range_t)retval; +} + + +void lis2dw_set_data_rate(lis2dw_data_rate_t dataRate) { + uint8_t val = watch_i2c_read8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL1) & 0x0F; + uint8_t bits = dataRate << 4; + + watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL1, val | bits); +} + +lis2dw_data_rate_t lis2dw_get_data_rate(void) { + return watch_i2c_read8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL1) >> 4; +} diff --git a/watch-library/driver/lis2dw.h b/watch-library/driver/lis2dw.h new file mode 100644 index 00000000..ac2d60bb --- /dev/null +++ b/watch-library/driver/lis2dw.h @@ -0,0 +1,280 @@ +/* + * MIT License + * + * Copyright (c) 2021 Joey Castillo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef LIS2DW_H +#define LIS2DW_H + +#include <stdbool.h> +#include <stdint.h> + +typedef struct { + int16_t x; + int16_t y; + int16_t z; +} lis2dw_reading; + +typedef struct { + float x; + float y; + float z; +} lis2dw_acceleration_measurement; + +typedef enum { + LIS2DW_DATA_RATE_POWERDOWN = 0, + LIS2DW_DATA_RATE_LOWEST = 0b0001, // 12.5 Hz in high performance mode, 1.6 Hz in low power + LIS2DW_DATA_RATE_12_5_HZ = 0b0010, + LIS2DW_DATA_RATE_25_HZ = 0b0011, + LIS2DW_DATA_RATE_50_HZ = 0b0100, + LIS2DW_DATA_RATE_100_HZ = 0b0101, + LIS2DW_DATA_RATE_200_HZ = 0b0110, + LIS2DW_DATA_RATE_HP_400_HZ = 0b0111, + LIS2DW_DATA_RATE_HP_800_HZ = 0b1000, + LIS2DW_DATA_RATE_HP_1600_HZ = 0b1001, + +} lis2dw_data_rate_t; + +typedef enum { + LIS2DW_MODE_LOW_POWER = 0b00, + LIS2DW_MODE_HIGH_PERFORMANCE = 0b01, + LIS2DW_MODE_ON_DEMAND = 0b10, +} lis2dw_mode_t; + +typedef enum { + LIS2DW_LP_MODE_1 = 0b00, // 12-bit + LIS2DW_LP_MODE_2 = 0b01, // 14-bit + LIS2DW_LP_MODE_3 = 0b10, // 14-bit + LIS2DW_LP_MODE_4 = 0b11, // 14-bit +} lis2dw_low_power_mode_t; + +typedef enum { + LIS2DW_BANDWIDTH_FILTER_DIV2 = 0b00, + LIS2DW_BANDWIDTH_FILTER_DIV4 = 0b01, + LIS2DW_BANDWIDTH_FILTER_DIV10 = 0b10, + LIS2DW_BANDWIDTH_FILTER_DIV20 = 0b11, +} lis2dw_bandwidth_filtering_mode_t; + +typedef enum { + LIS2DW_RANGE_16_G = 0b11, // +/- 16g + LIS2DW_RANGE_8_G = 0b10, // +/- 8g + LIS2DW_RANGE_4_G = 0b01, // +/- 4g + LIS2DW_RANGE_2_G = 0b00 // +/- 2g (default value) +} lis2dw_range_t; + +typedef enum { + LIS2DW_INTERRUPT_CONFIGURATION_OR = 0b00000000, + LIS2DW_INTERRUPT_CONFIGURATION_AND = 0b10000000, + LIS2DW_INTERRUPT_CONFIGURATION_6D_MOVEMENT = 0b01000000, + LIS2DW_INTERRUPT_CONFIGURATION_6D_POSITION = 0b11000000, // in 6D mode, these have an alternate meaning: + LIS2DW_INTERRUPT_CONFIGURATION_Z_HIGH_ENABLE = 0b00100000, // Z up enable + LIS2DW_INTERRUPT_CONFIGURATION_Z_LOW_ENABLE = 0b00010000, // Z down enable + LIS2DW_INTERRUPT_CONFIGURATION_Y_HIGH_ENABLE = 0b00001000, // Y up enable + LIS2DW_INTERRUPT_CONFIGURATION_Y_LOW_ENABLE = 0b00000100, // Y down enable + LIS2DW_INTERRUPT_CONFIGURATION_X_HIGH_ENABLE = 0b00000010, // X up enable + LIS2DW_INTERRUPT_CONFIGURATION_X_LOW_ENABLE = 0b00000001, // X down enable +} lis2dw_interrupt_configuration; + +typedef enum { + LIS2DW_INTERRUPT_STATE_ACTIVE = 0b01000000, + LIS2DW_INTERRUPT_STATE_Z_HIGH = 0b00100000, // Z up + LIS2DW_INTERRUPT_STATE_Z_LOW = 0b00010000, // Z down + LIS2DW_INTERRUPT_STATE_Y_HIGH = 0b00001000, // Y up + LIS2DW_INTERRUPT_STATE_Y_LOW = 0b00000100, // Y down + LIS2DW_INTERRUPT_STATE_X_HIGH = 0b00000010, // X up + LIS2DW_INTERRUPT_STATE_X_LOW = 0b00000001, // X down +} lis2dw_interrupt_state; + +// Assumes SA0 is high; if low, its 0x18 +#define LIS2DW_ADDRESS (0x19) + +#define LIS2DW_REG_OUT_TEMP_L 0x0D ///< Temperature data low bit +#define LIS2DW_REG_OUT_TEMP_H 0x0E ///< Temperature data high bit + +#define LIS2DW_REG_WHO_AM_I 0x0F ///< Device identification, will read 0x44 +#define LIS2DW_WHO_AM_I_VAL 0x44 ///< Expected value of the WHO_AM_I register + +#define LIS2DW_REG_CTRL1 0x20 ///< CTRL_REG1 in the data sheet. +#define LIS2DW_CTRL1_VAL_ODR_POWERDOWN 0 +#define LIS2DW_CTRL1_VAL_ODR_LOWEST (LIS2DW_DATA_RATE_LOWEST << 4) +#define LIS2DW_CTRL1_VAL_ODR_12_5HZ (LIS2DW_DATA_RATE_12_5_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_25HZ (LIS2DW_DATA_RATE_25_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_50HZ (LIS2DW_DATA_RATE_50_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_100HZ (LIS2DW_DATA_RATE_100_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_200HZ (LIS2DW_DATA_RATE_200_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_HP_400_HZ (LIS2DW_DATA_RATE_HP_400_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_HP_800_HZ (LIS2DW_DATA_RATE_HP_800_HZ << 4) +#define LIS2DW_CTRL1_VAL_ODR_HP_1600_HZ (LIS2DW_DATA_RATE_HP_1600_HZ << 4) +#define LIS2DW_CTRL1_VAL_MODE_LOW_POWER (LIS2DW_MODE_LOW_POWER << 2) +#define LIS2DW_CTRL1_VAL_MODE_HIGH_PERFORMANCE (LIS2DW_MODE_HIGH_PERFORMANCE << 2) +#define LIS2DW_CTRL1_VAL_MODE_ON_DEMAND (LIS2DW_MODE_ON_DEMAND << 2) +#define LIS2DW_CTRL1_VAL_LPMODE_1 (LIS2DW_LP_MODE_1 << 0) +#define LIS2DW_CTRL1_VAL_LPMODE_2 (LIS2DW_LP_MODE_2 << 0) +#define LIS2DW_CTRL1_VAL_LPMODE_3 (LIS2DW_LP_MODE_3 << 0) +#define LIS2DW_CTRL1_VAL_LPMODE_4 (LIS2DW_LP_MODE_4 << 0) + +#define LIS2DW_REG_CTRL2 0x21 +#define LIS2DW_CTRL2_VAL_BOOT 0b10000000 +#define LIS2DW_CTRL2_VAL_SOFT_RESET 0b01000000 +#define LIS2DW_CTRL2_VAL_CS_PU_DISC 0b00010000 +#define LIS2DW_CTRL2_VAL_BDU 0b00001000 +#define LIS2DW_CTRL2_VAL_IF_ADD_INC 0b00000100 + +#define LIS2DW_REG_CTRL3 0x22 +#define LIS2DW_CTRL4_VAL_SELF_TEST_POS 0b10000000 +#define LIS2DW_CTRL4_VAL_SELF_TEST_NEG 0b01000000 +#define LIS2DW_CTRL3_VAL_PP_OD 0b00100000 +#define LIS2DW_CTRL3_VAL_LIR 0b00010000 +#define LIS2DW_CTRL3_VAL_H_L_ACTIVE 0b00001000 +#define LIS2DW_CTRL3_VAL_SLP_MODE_SEL 0b00000010 +#define LIS2DW_CTRL3_VAL_SLP_MODE_1 0b00000001 + +#define LIS2DW_REG_CTRL4 0x23 +#define LIS2DW_CTRL4_INT1_6D 0b10000000 +#define LIS2DW_CTRL4_INT1_SINGLE_TAP 0b01000000 +#define LIS2DW_CTRL4_INT1_WU 0b00100000 +#define LIS2DW_CTRL4_INT1_FF 0b00010000 +#define LIS2DW_CTRL4_INT1_TAP 0b00001000 +#define LIS2DW_CTRL4_INT1_DIFF5 0b00000100 +#define LIS2DW_CTRL4_INT1_FTH 0b00000010 +#define LIS2DW_CTRL4_INT1_DRDY 0b00000001 + +#define LIS2DW_REG_CTRL5 0x24 +#define LIS2DW_CTRL5_INT2_SLEEP_STATE 0b10000000 +#define LIS2DW_CTRL5_INT2_SLEEP_CHG 0b01000000 +#define LIS2DW_CTRL5_INT2_BOOT 0b00100000 +#define LIS2DW_CTRL5_INT2_DRDY_T 0b00010000 +#define LIS2DW_CTRL5_INT2_OVR 0b00001000 +#define LIS2DW_CTRL5_INT2_DIFF5 0b00000100 +#define LIS2DW_CTRL5_INT2_FTH 0b00000010 +#define LIS2DW_CTRL5_INT2_DRDY 0b00000001 + +#define LIS2DW_REG_CTRL6 0x25 +#define LIS2DW_CTRL6_VAL_BANDWIDTH_DIV2 (LIS2DW_BANDWIDTH_FILTER_DIV2 << 6) +#define LIS2DW_CTRL6_VAL_BANDWIDTH_DIV4 (LIS2DW_BANDWIDTH_FILTER_DIV4 << 6) +#define LIS2DW_CTRL6_VAL_BANDWIDTH_DIV10 (LIS2DW_BANDWIDTH_FILTER_DIV10 << 6) +#define LIS2DW_CTRL6_VAL_BANDWIDTH_DIV20 (LIS2DW_BANDWIDTH_FILTER_DIV20 << 6) +#define LIS2DW_CTRL6_VAL_RANGE_2G (LIS2DW_RANGE_2_G << 4) +#define LIS2DW_CTRL6_VAL_RANGE_4G (LIS2DW_RANGE_4_G << 4) +#define LIS2DW_CTRL6_VAL_RANGE_8G (LIS2DW_RANGE_8_G << 4) +#define LIS2DW_CTRL6_VAL_RANGE_16G (LIS2DW_RANGE_16_G << 4) +#define LIS2DW_CTRL6_VAL_FDS 0b00001000 +#define LIS2DW_CTRL6_VAL_LOW_NOISE 0b00000100 + +#define LIS2DW_REG_OUT_TEMP 0x26 + +#define LIS2DW_REG_STATUS 0x27 +#define LIS2DW_STATUS_VAL_FIFO_THS 0b10000000 +#define LIS2DW_STATUS_VAL_WU_IA 0b01000000 +#define LIS2DW_STATUS_VAL_SLEEP_STATE 0b00100000 +#define LIS2DW_STATUS_VAL_DOUBLE_TAP 0b00010000 +#define LIS2DW_STATUS_VAL_SINGLE_TAP 0b00001000 +#define LIS2DW_STATUS_VAL_6D_IA 0b00000100 +#define LIS2DW_STATUS_VAL_FF_IA 0b00000010 +#define LIS2DW_STATUS_VAL_DRDY 0b00000001 + +#define LIS2DW_REG_OUT_X_L 0x28 +#define LIS2DW_REG_OUT_X_H 0x29 +#define LIS2DW_REG_OUT_Y_L 0x2A +#define LIS2DW_REG_OUT_Y_H 0x2B +#define LIS2DW_REG_OUT_Z_L 0x2C +#define LIS2DW_REG_OUT_Z_H 0x2D + +#define LIS2DW_REG_FIFO_CTRL 0x2E +#define LIS2DW_REG_FIFO_SRC 0x2F + +#define LIS2DW_REG_TAP_THS_X 0x30 +#define LIS2DW_REG_TAP_THS_Y 0x31 +#define LIS2DW_REG_TAP_THS_Z 0x32 +#define LIS2DW_REG_INT1_DUR 0x33 +#define LIS2DW_REG_WAKE_UP_THS 0x34 +#define LIS2DW_REG_WAKE_UP_DUR 0x35 +#define LIS2DW_REG_FREE_FALL 0x36 +#define LIS2DW_REG_STATUS_DUP 0x37 + +#define LIS2DW_REG_WAKE_UP_SRC 0x38 +#define LIS2DW_WAKE_UP_SRC_VAL_FF_IA 0b00100000 +#define LIS2DW_WAKE_UP_SRC_VAL_SLEEP_STATE_IA 0b00010000 +#define LIS2DW_WAKE_UP_SRC_VAL_WU_IA 0b00001000 +#define LIS2DW_WAKE_UP_SRC_VAL_X_WU 0b00000100 +#define LIS2DW_WAKE_UP_SRC_VAL_Y_WU 0b00000010 +#define LIS2DW_WAKE_UP_SRC_VAL_Z_WU 0b00000001 + +#define LIS2DW_REG_TAP_SRC 0x39 +#define LIS2DW_TAP_SRC_VAL_TAP_IA 0b01000000 +#define LIS2DW_TAP_SRC_VAL_SINGLE_TAP 0b00100000 +#define LIS2DW_TAP_SRC_VAL_DOUBLE_TAP 0b00010000 +#define LIS2DW_TAP_SRC_VAL_TAP_SIGN 0b00001000 +#define LIS2DW_TAP_SRC_VAL_X_TAP 0b00000100 +#define LIS2DW_TAP_SRC_VAL_Y_TAP 0b00000010 +#define LIS2DW_TAP_SRC_VAL_Z_TAP 0b00000001 + +#define LIS2DW_REG_SIXD_SRC 0x3A +#define LIS2DW_WAKE_UP_SRC_VAL_6D_IA 0b01000000 +#define LIS2DW_WAKE_UP_SRC_VAL_ZH 0b00100000 +#define LIS2DW_WAKE_UP_SRC_VAL_ZL 0b00010000 +#define LIS2DW_WAKE_UP_SRC_VAL_YH 0b00001000 +#define LIS2DW_WAKE_UP_SRC_VAL_YL 0b00000100 +#define LIS2DW_WAKE_UP_SRC_VAL_XH 0b00000010 +#define LIS2DW_WAKE_UP_SRC_VAL_XL 0b00000001 + +#define LIS2DW_REG_ALL_INT_SRC 0x3B +#define LIS2DW_REG_ALL_INT_SRC_SLEEP_CHANGE_IA 0b00100000 +#define LIS2DW_REG_ALL_INT_SRC_6D_IA 0b00010000 +#define LIS2DW_REG_ALL_INT_SRC_DOUBLE_TAP 0b00001000 +#define LIS2DW_REG_ALL_INT_SRC_SINGLE_TAP 0b00000100 +#define LIS2DW_REG_ALL_INT_SRC_WU_IA 0b00000010 +#define LIS2DW_REG_ALL_INT_SRC_FF_IA 0b00000001 + +#define LIS2DW_REG_X_OFS_USR 0x3C +#define LIS2DW_REG_Y_OFS_USR 0x3D +#define LIS2DW_REG_Z_OFS_USR 0x3E + +#define LIS2DW_REG_CTRL7 0x3F +#define LIS2DW_CTRL7_VAL_DRDY_PULSED 0b10000000 +#define LIS2DW_CTRL7_VAL_INT2_ON_INT1 0b01000000 +#define LIS2DW_CTRL7_VAL_INTERRUPTS_ENABLE 0b00100000 +#define LIS2DW_CTRL7_VAL_USR_OFF_ON_OUT 0b00010000 +#define LIS2DW_CTRL7_VAL_USR_OFF_ON_WU 0b00001000 +#define LIS2DW_CTRL7_VAL_USR_OFF_W 0b00000100 +#define LIS2DW_CTRL7_VAL_HP_REF_MODE 0b00000010 +#define LIS2DW_CTRL7_VAL_LPASS_ON6D 0b00000001 + +bool lis2dw_begin(void); + +uint8_t lis2dw_get_device_id(void); + +bool lis2dw_have_new_data(void); + +lis2dw_reading lis2dw_get_raw_reading(void); + +lis2dw_acceleration_measurement lis2dw_get_acceleration_measurement(lis2dw_reading *out_reading); + +void lis2dw_set_range(lis2dw_range_t range); + +lis2dw_range_t lis2dw_get_range(void); + +void lis2dw_set_data_rate(lis2dw_data_rate_t dataRate); + +lis2dw_data_rate_t lis2dw_get_data_rate(void); + +#endif // LIS2DW_H |