Sensor Watch Simulator (#35)

* Put something on screen

* Use the 32bit watch_date_time repr to pass from JS

* Implement periodic callbacks

* Clear display on enabling

* Hook up watch_set_led_color() to SVG (green-only)

* Make debug output full-width

* Remove default Emscripten canvas

* Implement sleep and button clicks

* Fix time zone conversion bug in beats-time app

* Clean up warnings

* Fix pin levels

* Set time zone to browser value (if available)

* Add basic backup data saving

* Silence format specifier warnings in both targets

* Remove unnecessary, copied files

* Use RTC pointer to clear callbacks (if available)

* Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES

* Change each face to const preprocessor definition

* Remove Intl.DateTimeFormat usage

* Update shell.html title, header

* Add touch start/end event handlers on SVG buttons

* Update shell.html

* Update folder structure (shared, simulator, hardware under watch-library)

* Tease out shared components from watch_slcd

* Clean up simulator watch_slcd.c inline JS calls

* Fix missing newlines at end of file

* Add simulator warnings (except format, unused-paremter)

* Implement remaining watch_rtc functions

* Fix button bug on mouse down then drag out

* Implement remaining watch_slcd functions

* Link keyboard events to buttons (for keys A, L, M)

* Rewrite event handling (mouse, touch, keyboard) in C

* Set explicit text UTF-8 charset in shell.html

* Address PR comments

* Remove unused directories from include paths

1 files changed, 0 insertions, 159 deletions

diff --git a/watch-library/watch/watch_deepsleep.h b/watch-library/watch/watch_deepsleep.h
deleted file mode 100644
index 56d75478..00000000
--- a/watch-library/watch/watch_deepsleep.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * MIT License
- *
- * Copyright (c) 2020 Joey Castillo
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-#ifndef _WATCH_DEEPSLEEP_H_INCLUDED
-#define _WATCH_DEEPSLEEP_H_INCLUDED
-////< @file watch_deepsleep.h
-
-#include "watch.h"
-
-// These are declared in watch_rtc.c.
-extern ext_irq_cb_t btn_alarm_callback;
-extern ext_irq_cb_t a2_callback;
-extern ext_irq_cb_t a4_callback;
-
-/** @addtogroup deepsleep Sleep Control
-  * @brief This section covers functions related to the various sleep modes available to the watch,
-  *        including Sleep, Deep Sleep, and BACKUP mode.
-  * @details These terms changed meaning a bit over the course of development; if you are coming
-  *          to this documentation after having worked with an earlier version of the library,
-  *          these definitions should clarify the terminology. Terms in all caps are modes of the
-  *          SAM L22; terms in Title Case are specific implementations in this library.
-  *           - ACTIVE mode is the mode the SAM L22 is in when both the main clock and the CPU are
-  *             running. It is the most power-hungry mode. If you ever call delay_ms to wait a beat,
-  *             the watch will remain in ACTIVE mode while taking that delay. In addition, whenever
-  *             your `app_loop` function returns false, the device will remain in ACTIVE mode and
-  *             call your `app_loop` function again.
-  *           - STANDBY mode turns off the main clock and halts the CPU. Since the PWM driver is
-  *             run from the main clock, it also stops the buzzer and any dimming of the LEDs.
-  *             In this mode, the watch can wake from any interrupt source. Whenever your `app_loop`
-  *             function returns true, the watch enters STANDBY mode until the next tick or other
-  *             interrupt. This mode uses much less power than ACTIVE mode.
-  *           - Sleep Mode is a special case of STANDBY mode. In this mode, the watch turns off
-  *             almost all peripherals (including the external interrupt controller), and disables
-  *             all pins except for the external wake pins. In this mode the watch can only wake
-  *             from the RTC alarm interrupt or an external wake pin (A2, A4 or the alarm button),
-  *             but the display remains on and your app's state is retained. You can enter this
-  *             mode by calling `watch_enter_sleep_mode`. It consumes an order of magnitude less
-  *             power than STANDBY mode.
-  *           - Deep Sleep Mode is identical to sleep mode, but it also turns off the LCD to save
-  *             a bit more power. You can enter this mode by calling `watch_enter_deep_sleep_mode`.
-  *           - BACKUP mode is the lowest possible power mode on the SAM L22. It turns off all pins
-  *             and peripherals except for the RTC. It also turns off the RAM, obliterating your
-  *             application's state. The only way to wake from this mode is by setting an external
-  *             wake interrupt on pin A2 or pin A4, and when you do wake it will be much like a
-  *             wake from reset. You can enter this mode by calling `watch_enter_backup_mode`.
-  */
-/// @{
-
-/** @brief Registers a callback on one of the RTC's external wake pins, which can wake the device
-  *        from Sleep, Deep Sleep and BACKUP modes (but see warning re: BACKUP mode).
-  * @param pin Either pin BTN_ALARM, A2, or A4. These are the three external wake pins. If the pin
-  *            is BTN_ALARM, this function also enables an internal pull down on that pin.
-  * @param callback The callback to be called if this pin triggers outside of BACKUP mode. If this is
-  *                 NULL, no callback will be called even in normal modes, but the interrupt will
-  *                 still be enabled so that it can wake the device.
-  * @param level The level you wish to scan for: true for rising, false for falling. Note that you
-  *              cannot scan for both rising and falling edges like you can with the external interrupt
-  *              pins; with the external wake interrupt, you can only get one or the other.
-  * @note When in ACTIVE, STANDBY and Sleep / Deep sleep modes, this will function much like a standard
-  *       external interrupt situation: these pins will wake the device, and your callback will be
-  *       called. However, if the device enters BACKUP mode and one of these pins wakes the device, your
-  *       callback WILL NOT be called, as the device is basically waking from reset at that point.
-  * @warning As of the current SAM L22 silicon revision (rev B), the BTN_ALARM pin cannot wake the
-  *          device from BACKUP mode. You can still use this function to register a BTN_ALARM interrupt
-  *          in normal or deep sleep mode, but to wake from BACKUP, you will need to use pin A2 or A4.
-  */
-void watch_register_extwake_callback(uint8_t pin, ext_irq_cb_t callback, bool level);
-
-/** @brief Unregisters the RTC interrupt on one of the EXTWAKE pins. This will prevent a value change on
-  *        one of these pins from waking the device.
-  * @param pin Either pin BTN_ALARM, A2, or A4. If the pin is BTN_ALARM, this function DOES NOT disable
-  *            the internal pull down on that pin.
-  */
-void watch_disable_extwake_interrupt(uint8_t pin);
-
-/** @brief Stores data in one of the RTC's backup registers, which retain their data in BACKUP mode.
-  * @param data An unsigned 32 bit integer with the data you wish to store.
-  * @param reg A register from 0-7.
-  */
-void watch_store_backup_data(uint32_t data, uint8_t reg);
-
-/** @brief Gets 32 bits of data from the RTC's BACKUP register.
-  * @param reg A register from 0-7.
-  * @return An unsigned 32 bit integer with the from the backup register.
-  */
-uint32_t watch_get_backup_data(uint8_t reg);
-
-/** @brief enters Sleep Mode by disabling all pins and peripherals except the RTC and the LCD.
-  * @details This sleep mode is not the lowest power mode available, but it has the benefit of allowing you
-  *          to display a message to the user while asleep. You can also set an alarm interrupt to wake at a
-  *          configfurable interval (every minute, hour or day) to update the display. You can wake from this
-  *          mode by pressing the ALARM button, if you registered an extwake callback on the ALARM button.
-  *          Also note that when your app wakes from this sleep mode, your app_setup method will be called
-  *          again, since this function will have disabled things you set up there.
-  *
-  *          Note that to wake from either the ALARM button, the A2 interrupt or the A4 interrupt, you
-  *          must first configure this by calling watch_register_extwake_callback.
-  *
-  *          You can estimate the power consumption of this mode to be on the order of 30 microwatts
-  *          (about 10 µA at 3 V).
-  */
-void watch_enter_sleep_mode(void);
-
-/** @brief enters Deep Sleep Mode by disabling all pins and peripherals except the RTC.
-  * @details Short of BACKUP mode, this is the lowest power mode you can enter while retaining your
-  *          application state (and the ability to wake with the alarm button). Just note that the display
-  *          will be completely off, so you should document to the user of your application that they will
-  *          need to press the alarm button to wake the device, or use a sensor board with support for
-  *          an external wake pin.
-  *
-  *          All notes from watch_enter_sleep_mode apply here, except for power consumption. You can estimate
-  *          the power consumption of this mode to be on the order of 12 microwatts (about 4µA at 3 V).
-  */
-void watch_enter_deep_sleep_mode(void);
-
-/** @brief Enters the SAM L22's lowest-power mode, BACKUP.
-  * @details This function does some housekeeping before entering BACKUP mode. It first disables all pins
-  *          and peripherals except for the RTC, and disables the tick interrupt (since that would wake
-  *          us up from BACKUP mode). Once again, if you wish to wake from the A2 or the A4 interrupt,
-  *          you must first configure this by calling watch_register_extwake_callback.
-  * @note If you have a callback set for an external wake interrupt, it will be called if triggered while
-  *       in ACTIVE, STANDBY, Sleep and Deep Sleep modes, but it *will not be called* when waking from
-  *       BACKUP mode. Waking from backup is effectively like waking from reset, except that your
-  *       @ref app_wake_from_backup function will be called.
-  * @warning On current revisions of the SAM L22 silicon, the ALARM_BTN pin (PA02 RTC/IN2) cannot wake
-  *          the device from deep sleep mode. There is an errata note (Reference: 15010) that says that
-  *          due to a silicon bug, RTC/IN2 is not functional in BACKUP. As a result, you should not call
-  *          this function unless you have a device on the nine-pin connector with an external interrupt
-  *          on pin A2 or A4 (i.e. an accelerometer with an interrupt pin).
-  */
-void watch_enter_backup_mode(void);
-
-__attribute__((deprecated("Use watch_enter_sleep_mode or watch_enter_deep_sleep_mode instead")))
-void watch_enter_shallow_sleep(bool display_on);
-
-__attribute__((deprecated("Use watch_enter_backup_mode instead")))
-void watch_enter_deep_sleep(void);
-/// @}
-#endif