Sensor Watch Simulator (#35)

* Put something on screen

* Use the 32bit watch_date_time repr to pass from JS

* Implement periodic callbacks

* Clear display on enabling

* Hook up watch_set_led_color() to SVG (green-only)

* Make debug output full-width

* Remove default Emscripten canvas

* Implement sleep and button clicks

* Fix time zone conversion bug in beats-time app

* Clean up warnings

* Fix pin levels

* Set time zone to browser value (if available)

* Add basic backup data saving

* Silence format specifier warnings in both targets

* Remove unnecessary, copied files

* Use RTC pointer to clear callbacks (if available)

* Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES

* Change each face to const preprocessor definition

* Remove Intl.DateTimeFormat usage

* Update shell.html title, header

* Add touch start/end event handlers on SVG buttons

* Update shell.html

* Update folder structure (shared, simulator, hardware under watch-library)

* Tease out shared components from watch_slcd

* Clean up simulator watch_slcd.c inline JS calls

* Fix missing newlines at end of file

* Add simulator warnings (except format, unused-paremter)

* Implement remaining watch_rtc functions

* Fix button bug on mouse down then drag out

* Implement remaining watch_slcd functions

* Link keyboard events to buttons (for keys A, L, M)

* Rewrite event handling (mouse, touch, keyboard) in C

* Set explicit text UTF-8 charset in shell.html

* Address PR comments

* Remove unused directories from include paths

1 files changed, 0 insertions, 166 deletions

diff --git a/watch-library/hal/include/hpl_spi_m_sync.h b/watch-library/hal/include/hpl_spi_m_sync.h
deleted file mode 100644
index 38df15b4..00000000
--- a/watch-library/hal/include/hpl_spi_m_sync.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/**
- * \file
- *
- * \brief SPI related functionality declaration.
- *
- * Copyright (c) 2015-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HPL_SPI_M_SYNC_H_INCLUDED
-#define _HPL_SPI_M_SYNC_H_INCLUDED
-
-#include <hpl_spi.h>
-#include <hpl_spi_sync.h>
-
-/**
- * \addtogroup hpl_spi HPL SPI
- *
- *@{
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Uses common SPI sync device driver. */
-#define _spi_m_sync_dev _spi_sync_dev
-
-/**
- * \name HPL functions
- */
-//@{
-/**
- *  \brief Initialize SPI for access without interrupts
- *  It will load default hardware configuration and software struct.
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \param[in] hw Pointer to the hardware base.
- *  \return Operation status.
- *  \retval ERR_INVALID_ARG Input parameter problem.
- *  \retval ERR_BUSY SPI hardware not ready (resetting).
- *  \retval ERR_DENIED SPI has been enabled.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_init(struct _spi_m_sync_dev *dev, void *const hw);
-
-/**
- *  \brief Deinitialize SPI
- *  Disable, reset the hardware and the software struct.
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \return Operation status.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_deinit(struct _spi_m_sync_dev *dev);
-
-/**
- *  \brief Enable SPI for access without interrupts
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \return Operation status.
- *  \retval ERR_BUSY SPI hardware not ready (resetting).
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_enable(struct _spi_m_sync_dev *dev);
-
-/**
- *  \brief Disable SPI for access without interrupts
- *  Disable SPI. Deactivate all CS pins if works as master.
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \return Operation status.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_disable(struct _spi_m_sync_dev *dev);
-
-/**
- *  \brief Set SPI transfer mode
- *  Set SPI transfer mode (\ref spi_transfer_mode),
- *  which controls clock polarity and clock phase.
- *  Mode 0: leading edge is rising edge, data sample on leading edge.
- *  Mode 1: leading edge is rising edge, data sample on trailing edge.
- *  Mode 2: leading edge is falling edge, data sample on leading edge.
- *  Mode 3: leading edge is falling edge, data sample on trailing edge.
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \param[in] mode The SPI transfer mode.
- *  \return Operation status.
- *  \retval ERR_BUSY SPI is not ready to accept new setting.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_set_mode(struct _spi_m_sync_dev *dev, const enum spi_transfer_mode mode);
-
-/**
- *  \brief Set SPI baudrate
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \param[in] baud_val The SPI baudrate value, see \ref _spi_calc_baud_val() on
- *                  how it's generated.
- *  \return Operation status.
- *  \retval ERR_BUSY SPI is not ready to accept new setting.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_set_baudrate(struct _spi_m_sync_dev *dev, const uint32_t baud_val);
-
-/**
- *  \brief Set SPI char size
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \param[in] char_size The character size, see \ref spi_char_size.
- *  \return Operation status.
- *  \retval ERR_INVALID_ARG The character size is not supported.
- *  \retval ERR_BUSY SPI is not ready to accept new setting.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_set_char_size(struct _spi_m_sync_dev *dev, const enum spi_char_size char_size);
-
-/**
- *  \brief Set SPI data order
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \param[in] dord SPI data order (LSB/MSB first).
- *  \return Operation status.
- *  \retval ERR_INVALID_ARG The character size is not supported.
- *  \retval ERR_BUSY SPI is not ready to accept new setting.
- *  \retval 0 Operation done successfully.
- */
-int32_t _spi_m_sync_set_data_order(struct _spi_m_sync_dev *dev, const enum spi_data_order dord);
-
-/**
- *  \brief Transfer the whole message without interrupt
- *  Transfer the message, it will keep waiting until the message finish or
- *  error.
- *  \param[in, out] dev Pointer to the SPI device instance.
- *  \param[in] msg Pointer to the message instance to process.
- *  \return Error or number of characters transferred.
- *  \retval ERR_BUSY SPI hardware is not ready to start transfer (not
- *                   enabled, busy applying settings, ...).
- *  \retval SPI_ERR_OVERFLOW Overflow error.
- *  \retval >=0 Number of characters transferred.
- */
-int32_t _spi_m_sync_trans(struct _spi_m_sync_dev *dev, const struct spi_msg *msg);
-//@}
-
-#ifdef __cplusplus
-}
-#endif
-
-/**@}*/
-#endif /* ifndef _HPL_SPI_M_SYNC_H_INCLUDED */