diff options
| author | Joey Castillo <jose.castillo@gmail.com> | 2021-08-28 12:50:18 -0400 |
|---|---|---|
| committer | Joey Castillo <jose.castillo@gmail.com> | 2021-08-28 12:50:18 -0400 |
| commit | 39a5c822a2a2e798e2e39ff8a98b7af84253026c (patch) | |
| tree | fa157c98d3aea0d4f996e4415aa2a7ad1093ac05 /tinyusb/hw/bsp/stm32l476disco/board.mk | |
| parent | c9e00b83bbdcb05058806d915ec4fff3cf4e596f (diff) | |
| download | Sensor-Watch-39a5c822a2a2e798e2e39ff8a98b7af84253026c.tar.gz Sensor-Watch-39a5c822a2a2e798e2e39ff8a98b7af84253026c.tar.bz2 Sensor-Watch-39a5c822a2a2e798e2e39ff8a98b7af84253026c.zip | |
add tinyusb
Diffstat (limited to 'tinyusb/hw/bsp/stm32l476disco/board.mk')
| -rwxr-xr-x | tinyusb/hw/bsp/stm32l476disco/board.mk | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/stm32l476disco/board.mk b/tinyusb/hw/bsp/stm32l476disco/board.mk new file mode 100755 index 00000000..28824efd --- /dev/null +++ b/tinyusb/hw/bsp/stm32l476disco/board.mk @@ -0,0 +1,56 @@ +ST_FAMILY = l4 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DSTM32L476xx \ + -DCFG_TUSB_MCU=OPT_MCU_STM32L4 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32L476VGTx_FLASH.ld + +SRC_C += \ + src/portable/st/synopsys/dcd_synopsys.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l476xx.s + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = stm32l476vg + +# Path to STM32 Cube Programmer CLI, should be added into system path +STM32Prog = STM32_Programmer_CLI + +# flash target using on-board stlink +flash: $(BUILD)/$(PROJECT).elf + $(STM32Prog) --connect port=swd --write $< --go |