diff options
author | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
---|---|---|
committer | Willian Paixao <willian@ufpa.br> | 2021-12-05 19:16:34 +0100 |
commit | ac2e205ae9f465c27297ea542c72e8cfe4966f8c (patch) | |
tree | 16e4d1268b2631ba7e17dcda8f366f070fbd7475 /tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h | |
parent | bbd394a19aaa334a179c36cf2ed2a066f1bb312c (diff) | |
download | Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.gz Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.tar.bz2 Sensor-Watch-ac2e205ae9f465c27297ea542c72e8cfe4966f8c.zip |
remove tinyusb directory
Diffstat (limited to 'tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h')
-rwxr-xr-x | tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h deleted file mode 100755 index 4be2760b..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Copyright 2019 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ -#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_120MHz = 7, - kFlexSpiSerialClk_133MHz = 8, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */ |