remove tinyusb directory

199 files changed, 0 insertions, 16045 deletions

diff --git a/tinyusb/examples/device/99-tinyusb.rules b/tinyusb/examples/device/99-tinyusb.rules
deleted file mode 100755
index e6372ed5..00000000
--- a/tinyusb/examples/device/99-tinyusb.rules
+++ /dev/null
@@ -1,14 +0,0 @@
-# Copy this file to the location of your distribution's udev rules, for example on Ubuntu:
-#   sudo cp 99-tinyusb.rules /etc/udev/rules.d/
-# Then reload udev configuration by executing:
-#   sudo udevadm control --reload-rules
-#   sudo udevadm trigger
-
-# Check SUBSYSTEM
-SUBSYSTEMS=="hidraw", KERNEL=="hidraw*", MODE="0666", GROUP="dialout"
-
-# Rule applies to all TinyUSB example
-ATTRS{idVendor}=="cafe", MODE="0666", GROUP="dialout"
-
-# Rule to blacklist TinyUSB example from being manipulated by ModemManager.
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="cafe", ENV{ID_MM_DEVICE_IGNORE}="1"
diff --git a/tinyusb/examples/device/CMakeLists.txt b/tinyusb/examples/device/CMakeLists.txt
deleted file mode 100755
index a0e4600f..00000000
--- a/tinyusb/examples/device/CMakeLists.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
-
-project(tinyusb_device_examples)
-family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR})
-
-# family_add_subdirectory will filter what to actually add based on selected FAMILY
-family_add_subdirectory(audio_4_channel_mic)
-family_add_subdirectory(audio_test)
-family_add_subdirectory(board_test)
-family_add_subdirectory(cdc_dual_ports)
-family_add_subdirectory(cdc_msc)
-family_add_subdirectory(cdc_msc_freertos)
-family_add_subdirectory(dfu)
-family_add_subdirectory(dfu_runtime)
-family_add_subdirectory(dynamic_configuration)
-family_add_subdirectory(hid_composite)
-family_add_subdirectory(hid_composite_freertos)
-family_add_subdirectory(hid_generic_inout)
-family_add_subdirectory(hid_multiple_interface)
-family_add_subdirectory(midi_test)
-family_add_subdirectory(msc_dual_lun)
-family_add_subdirectory(net_lwip_webserver)
-family_add_subdirectory(uac2_headset)
-family_add_subdirectory(usbtmc)
-family_add_subdirectory(webusb_serial)
diff --git a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X
+++ /dev/null
diff --git a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMG b/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMG
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/.skip.MCU_SAMG
+++ /dev/null
diff --git a/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt b/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt
deleted file mode 100755
index f6e10e2e..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-  ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-)
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-  ${CMAKE_CURRENT_SOURCE_DIR}/src
-)
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
diff --git a/tinyusb/examples/device/audio_4_channel_mic/Makefile b/tinyusb/examples/device/audio_4_channel_mic/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/main.c b/tinyusb/examples/device/audio_4_channel_mic/src/main.c
deleted file mode 100755
index 983b87e5..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/src/main.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Reinhard Panhuber
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-/* plot_audio_samples.py requires following modules:
- * $ sudo apt install libportaudio
- * $ pip3 install sounddevice matplotlib
- *
- * Then run
- * $ python3 plot_audio_samples.py
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-#ifndef AUDIO_SAMPLE_RATE
-#define AUDIO_SAMPLE_RATE   48000
-#endif
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-// Audio controls
-// Current states
-bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 				          // +1 for master channel 0
-uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 					// +1 for master channel 0
-uint32_t sampFreq;
-uint8_t clkValid;
-
-// Range states
-audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
-audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
-
-// Audio test data
-uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ/2];   // Ensure half word aligned
-
-void led_blinking_task(void);
-void audio_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  // Init values
-  sampFreq = AUDIO_SAMPLE_RATE;
-  clkValid = 1;
-
-  sampleFreqRng.wNumSubRanges = 1;
-  sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE;
-  sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE;
-  sampleFreqRng.subrange[0].bRes = 0;
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-    audio_task();
-  }
-
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// AUDIO Task
-//--------------------------------------------------------------------+
-
-void audio_task(void)
-{
-  // Yet to be filled - e.g. put meas data into TX FIFOs etc.
-  asm("nop");
-}
-
-//--------------------------------------------------------------------+
-// Application Callback API Implementations
-//--------------------------------------------------------------------+
-
-// Invoked when audio class specific set request received for an EP
-bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
-{
-  (void) rhport;
-  (void) pBuff;
-
-  // We do not support any set range requests here, only current value requests
-  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t ep = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) ep;
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific set request received for an interface
-bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
-{
-  (void) rhport;
-  (void) pBuff;
-
-  // We do not support any set range requests here, only current value requests
-  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t itf = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) itf;
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific set request received for an entity
-bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t itf = TU_U16_LOW(p_request->wIndex);
-  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
-
-  (void) itf;
-
-  // We do not support any set range requests here, only current value requests
-  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
-
-  // If request is for our feature unit
-  if ( entityID == 2 )
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_FU_CTRL_MUTE:
-        // Request uses format layout 1
-        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t));
-
-        mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur;
-
-        TU_LOG2("    Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum);
-      return true;
-
-      case AUDIO_FU_CTRL_VOLUME:
-        // Request uses format layout 2
-        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t));
-
-        volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur;
-
-        TU_LOG2("    Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum);
-      return true;
-
-        // Unknown/Unsupported control
-      default:
-        TU_BREAKPOINT();
-      return false;
-    }
-  }
-  return false;    // Yet not implemented
-}
-
-// Invoked when audio class specific get request received for an EP
-bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t ep = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) ep;
-
-  //	return tud_control_xfer(rhport, p_request, &tmp, 1);
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific get request received for an interface
-bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t itf = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) itf;
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific get request received for an entity
-bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  // uint8_t itf = TU_U16_LOW(p_request->wIndex); 			// Since we have only one audio function implemented, we do not need the itf value
-  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
-
-  // Input terminal (Microphone input)
-  if (entityID == 1)
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_TE_CTRL_CONNECTOR:
-      {
-        // The terminal connector control only has a get request with only the CUR attribute.
-        audio_desc_channel_cluster_t ret;
-
-        // Those are dummy values for now
-        ret.bNrChannels = 1;
-        ret.bmChannelConfig = 0;
-        ret.iChannelNames = 0;
-
-        TU_LOG2("    Get terminal connector\r\n");
-
-        return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
-      }
-      break;
-
-        // Unknown/Unsupported control selector
-      default:
-        TU_BREAKPOINT();
-        return false;
-    }
-  }
-
-  // Feature unit
-  if (entityID == 2)
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_FU_CTRL_MUTE:
-        // Audio control mute cur parameter block consists of only one byte - we thus can send it right away
-        // There does not exist a range parameter block for mute
-        TU_LOG2("    Get Mute of channel: %u\r\n", channelNum);
-        return tud_control_xfer(rhport, p_request, &mute[channelNum], 1);
-
-      case AUDIO_FU_CTRL_VOLUME:
-        switch ( p_request->bRequest )
-        {
-          case AUDIO_CS_REQ_CUR:
-            TU_LOG2("    Get Volume of channel: %u\r\n", channelNum);
-            return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum]));
-
-          case AUDIO_CS_REQ_RANGE:
-            TU_LOG2("    Get Volume range of channel: %u\r\n", channelNum);
-
-            // Copy values - only for testing - better is version below
-            audio_control_range_2_n_t(1)
-            ret;
-
-            ret.wNumSubRanges = 1;
-            ret.subrange[0].bMin = -90;           // -90 dB
-            ret.subrange[0].bMax = 90;		// +90 dB
-            ret.subrange[0].bRes = 1; 		// 1 dB steps
-
-            return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
-
-            // Unknown/Unsupported control
-          default:
-            TU_BREAKPOINT();
-            return false;
-        }
-      break;
-
-        // Unknown/Unsupported control
-      default:
-        TU_BREAKPOINT();
-        return false;
-    }
-  }
-
-  // Clock Source unit
-  if ( entityID == 4 )
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_CS_CTRL_SAM_FREQ:
-        // channelNum is always zero in this case
-        switch ( p_request->bRequest )
-        {
-          case AUDIO_CS_REQ_CUR:
-            TU_LOG2("    Get Sample Freq.\r\n");
-            return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq));
-
-          case AUDIO_CS_REQ_RANGE:
-            TU_LOG2("    Get Sample Freq. range\r\n");
-            return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng));
-
-           // Unknown/Unsupported control
-          default:
-            TU_BREAKPOINT();
-            return false;
-        }
-      break;
-
-      case AUDIO_CS_CTRL_CLK_VALID:
-        // Only cur attribute exists for this request
-        TU_LOG2("    Get Sample Freq. valid\r\n");
-        return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid));
-
-      // Unknown/Unsupported control
-      default:
-        TU_BREAKPOINT();
-        return false;
-    }
-  }
-
-  TU_LOG2("  Unsupported entity: %d\r\n", entityID);
-  return false; 	// Yet not implemented
-}
-
-bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
-{
-  (void) rhport;
-  (void) itf;
-  (void) ep_in;
-  (void) cur_alt_setting;
-
-  for (uint8_t cnt=0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++)
-  {
-    tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX);
-  }
-
-  return true;
-}
-
-bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
-{
-  (void) rhport;
-  (void) n_bytes_copied;
-  (void) itf;
-  (void) ep_in;
-  (void) cur_alt_setting;
-
-  uint16_t dataVal;
-
-  // Generate dummy data
-  for (uint16_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++)
-  {
-    uint16_t * p_buff = i2s_dummy_buffer[cnt];              // 2 bytes per sample
-    dataVal = 1;
-    for (uint16_t cnt2 = 0; cnt2 < AUDIO_SAMPLE_RATE/1000; cnt2++)
-    {
-      for (uint8_t cnt3 = 0; cnt3 < CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX; cnt3++)
-      {
-        *p_buff++ = dataVal;
-      }
-      dataVal++;
-    }
-  }
-  return true;
-}
-
-bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-  (void) p_request;
-
-  return true;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py
deleted file mode 100755
index 9ab15135..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py
+++ /dev/null
@@ -1,34 +0,0 @@
-import sounddevice as sd
-import matplotlib.pyplot as plt
-import numpy as np
-import platform
-
-if __name__ == '__main__':
-
-    # If you got "ValueError: No input device matching", that is because your PC name example device
-    # differently from tested list below. Uncomment the next line to see full list and try to pick correct one
-    # print(sd.query_devices())
-
-    fs = 48000  		# Sample rate
-    duration = 100e-3   # Duration of recording
-
-    if platform.system() == 'Windows':
-        # WDM-KS is needed since there are more than one MicNode device APIs (at least in Windows)
-        device = 'Microphone (MicNode_4_Ch), Windows WDM-KS'
-    elif platform.system() == 'Darwin':
-        device = 'MicNode_4_Ch'
-    else:
-        device ='default'
-
-    myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=4, dtype='int16', device=device)
-    print('Waiting...')
-    sd.wait()  # Wait until recording is finished
-    print('Done!')
-
-    time = np.arange(0, duration, 1 / fs)  # time vector
-    plt.plot(time, myrecording)
-    plt.xlabel('Time [s]')
-    plt.ylabel('Amplitude')
-    plt.title('MicNode 4 Channel')
-    plt.show()
-    
\ No newline at end of file
diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h b/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h
deleted file mode 100755
index 44be5a0d..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-#error CFG_TUSB_MCU must be defined
-#endif
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
-
-#ifndef CFG_TUSB_DEBUG
-#define CFG_TUSB_DEBUG              0
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_AUDIO             1
-#define CFG_TUD_VENDOR            0
-
-//--------------------------------------------------------------------
-// AUDIO CLASS DRIVER CONFIGURATION
-//--------------------------------------------------------------------
-
-// Have a look into audio_device.h for all configurations
-
-#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                 TUD_AUDIO_MIC_FOUR_CH_DESC_LEN
-
-#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                                 1
-#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ                              64
-
-#define CFG_TUD_AUDIO_ENABLE_EP_IN                                    1
-#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX                    2         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
-#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
-#define CFG_TUD_AUDIO_EP_SZ_IN                                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          CFG_TUD_AUDIO_EP_SZ_IN
-
-#define CFG_TUD_AUDIO_ENABLE_ENCODING                                 1
-#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING                          1
-#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX                      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
-#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO                        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
-#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ                       (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO)
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c
deleted file mode 100755
index 93ec6e9f..00000000
--- a/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]     AUDIO | MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-    _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-enum
-{
-  ITF_NUM_AUDIO_CONTROL = 0,
-  ITF_NUM_AUDIO_STREAMING,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    	(TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-#define EPNUM_AUDIO   0x03
-#else
-#define EPNUM_AUDIO   0x01
-#endif
-
-uint8_t const desc_configuration[] =
-{
-    // Interface count, string index, total length, attribute, power in mA
-    TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-    // Interface number, string index, EP Out & EP In address, EP size
-    TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-    (const char[]) { 0x09, 0x04 }, 	// 0: is supported language is English (0x0409)
-    "PaniRCorp",                   	// 1: Manufacturer
-    "MicNode_4_Ch",    		// 2: Product
-    "123458",                      	// 3: Serials, should use chip ID
-    "UAC2",                 	 	// 4: Audio Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Convert ASCII string into UTF-16
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/audio_test/.skip.MCU_SAMD11 b/tinyusb/examples/device/audio_test/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/audio_test/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/audio_test/.skip.MCU_SAME5X b/tinyusb/examples/device/audio_test/.skip.MCU_SAME5X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/audio_test/.skip.MCU_SAME5X
+++ /dev/null
diff --git a/tinyusb/examples/device/audio_test/.skip.MCU_SAMG b/tinyusb/examples/device/audio_test/.skip.MCU_SAMG
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/audio_test/.skip.MCU_SAMG
+++ /dev/null
diff --git a/tinyusb/examples/device/audio_test/CMakeLists.txt b/tinyusb/examples/device/audio_test/CMakeLists.txt
deleted file mode 100755
index cb321f9a..00000000
--- a/tinyusb/examples/device/audio_test/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-  ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-)
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-  ${CMAKE_CURRENT_SOURCE_DIR}/src
-)
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/audio_test/Makefile b/tinyusb/examples/device/audio_test/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/audio_test/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/audio_test/src/main.c b/tinyusb/examples/device/audio_test/src/main.c
deleted file mode 100755
index 9a2fdd3a..00000000
--- a/tinyusb/examples/device/audio_test/src/main.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Reinhard Panhuber
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-/* plot_audio_samples.py requires following modules:
- * $ sudo apt install libportaudio
- * $ pip3 install sounddevice matplotlib
- *
- * Then run
- * $ python3 plot_audio_samples.py
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-#ifndef AUDIO_SAMPLE_RATE
-#define AUDIO_SAMPLE_RATE   48000
-#endif
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-// Audio controls
-// Current states
-bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 				          // +1 for master channel 0
-uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 					// +1 for master channel 0
-uint32_t sampFreq;
-uint8_t clkValid;
-
-// Range states
-audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
-audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
-
-// Audio test data
-uint16_t test_buffer_audio[CFG_TUD_AUDIO_EP_SZ_IN/2];
-uint16_t startVal = 0;
-
-void led_blinking_task(void);
-void audio_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  // Init values
-  sampFreq = AUDIO_SAMPLE_RATE;
-  clkValid = 1;
-
-  sampleFreqRng.wNumSubRanges = 1;
-  sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE;
-  sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE;
-  sampleFreqRng.subrange[0].bRes = 0;
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-    audio_task();
-  }
-
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// AUDIO Task
-//--------------------------------------------------------------------+
-
-void audio_task(void)
-{
-  // Yet to be filled - e.g. put meas data into TX FIFOs etc.
-  asm("nop");
-}
-
-//--------------------------------------------------------------------+
-// Application Callback API Implementations
-//--------------------------------------------------------------------+
-
-// Invoked when audio class specific set request received for an EP
-bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
-{
-  (void) rhport;
-  (void) pBuff;
-
-  // We do not support any set range requests here, only current value requests
-  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t ep = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) ep;
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific set request received for an interface
-bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
-{
-  (void) rhport;
-  (void) pBuff;
-
-  // We do not support any set range requests here, only current value requests
-  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t itf = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) itf;
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific set request received for an entity
-bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t itf = TU_U16_LOW(p_request->wIndex);
-  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
-
-  (void) itf;
-
-  // We do not support any set range requests here, only current value requests
-  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
-
-  // If request is for our feature unit
-  if ( entityID == 2 )
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_FU_CTRL_MUTE:
-        // Request uses format layout 1
-        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t));
-
-        mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur;
-
-        TU_LOG2("    Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum);
-      return true;
-
-      case AUDIO_FU_CTRL_VOLUME:
-        // Request uses format layout 2
-        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t));
-
-        volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur;
-
-        TU_LOG2("    Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum);
-      return true;
-
-        // Unknown/Unsupported control
-      default:
-        TU_BREAKPOINT();
-      return false;
-    }
-  }
-  return false;    // Yet not implemented
-}
-
-// Invoked when audio class specific get request received for an EP
-bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t ep = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) ep;
-
-  //	return tud_control_xfer(rhport, p_request, &tmp, 1);
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific get request received for an interface
-bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  uint8_t itf = TU_U16_LOW(p_request->wIndex);
-
-  (void) channelNum; (void) ctrlSel; (void) itf;
-
-  return false; 	// Yet not implemented
-}
-
-// Invoked when audio class specific get request received for an entity
-bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-
-  // Page 91 in UAC2 specification
-  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
-  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
-  // uint8_t itf = TU_U16_LOW(p_request->wIndex); 			// Since we have only one audio function implemented, we do not need the itf value
-  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
-
-  // Input terminal (Microphone input)
-  if (entityID == 1)
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_TE_CTRL_CONNECTOR:
-      {
-        // The terminal connector control only has a get request with only the CUR attribute.
-        audio_desc_channel_cluster_t ret;
-
-        // Those are dummy values for now
-        ret.bNrChannels = 1;
-        ret.bmChannelConfig = 0;
-        ret.iChannelNames = 0;
-
-        TU_LOG2("    Get terminal connector\r\n");
-
-        return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
-      }
-      break;
-
-        // Unknown/Unsupported control selector
-      default:
-        TU_BREAKPOINT();
-        return false;
-    }
-  }
-
-  // Feature unit
-  if (entityID == 2)
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_FU_CTRL_MUTE:
-        // Audio control mute cur parameter block consists of only one byte - we thus can send it right away
-        // There does not exist a range parameter block for mute
-        TU_LOG2("    Get Mute of channel: %u\r\n", channelNum);
-        return tud_control_xfer(rhport, p_request, &mute[channelNum], 1);
-
-      case AUDIO_FU_CTRL_VOLUME:
-        switch ( p_request->bRequest )
-        {
-          case AUDIO_CS_REQ_CUR:
-            TU_LOG2("    Get Volume of channel: %u\r\n", channelNum);
-            return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum]));
-
-          case AUDIO_CS_REQ_RANGE:
-            TU_LOG2("    Get Volume range of channel: %u\r\n", channelNum);
-
-            // Copy values - only for testing - better is version below
-            audio_control_range_2_n_t(1)
-            ret;
-
-            ret.wNumSubRanges = 1;
-            ret.subrange[0].bMin = -90;    // -90 dB
-            ret.subrange[0].bMax = 90;		// +90 dB
-            ret.subrange[0].bRes = 1; 		// 1 dB steps
-
-            return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
-
-            // Unknown/Unsupported control
-          default:
-            TU_BREAKPOINT();
-            return false;
-        }
-      break;
-
-        // Unknown/Unsupported control
-      default:
-        TU_BREAKPOINT();
-        return false;
-    }
-  }
-
-  // Clock Source unit
-  if ( entityID == 4 )
-  {
-    switch ( ctrlSel )
-    {
-      case AUDIO_CS_CTRL_SAM_FREQ:
-        // channelNum is always zero in this case
-        switch ( p_request->bRequest )
-        {
-          case AUDIO_CS_REQ_CUR:
-            TU_LOG2("    Get Sample Freq.\r\n");
-            return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq));
-
-          case AUDIO_CS_REQ_RANGE:
-            TU_LOG2("    Get Sample Freq. range\r\n");
-            return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng));
-
-           // Unknown/Unsupported control
-          default:
-            TU_BREAKPOINT();
-            return false;
-        }
-      break;
-
-      case AUDIO_CS_CTRL_CLK_VALID:
-        // Only cur attribute exists for this request
-        TU_LOG2("    Get Sample Freq. valid\r\n");
-        return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid));
-
-      // Unknown/Unsupported control
-      default:
-        TU_BREAKPOINT();
-        return false;
-    }
-  }
-
-  TU_LOG2("  Unsupported entity: %d\r\n", entityID);
-  return false; 	// Yet not implemented
-}
-
-bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
-{
-  (void) rhport;
-  (void) itf;
-  (void) ep_in;
-  (void) cur_alt_setting;
-
-  tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN);
-
-  return true;
-}
-
-bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
-{
-  (void) rhport;
-  (void) n_bytes_copied;
-  (void) itf;
-  (void) ep_in;
-  (void) cur_alt_setting;
-
-  for (size_t cnt = 0; cnt < CFG_TUD_AUDIO_EP_SZ_IN/2; cnt++)
-  {
-    test_buffer_audio[cnt] = startVal++;
-  }
-
-  return true;
-}
-
-bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void) rhport;
-  (void) p_request;
-  startVal = 0;
-
-  return true;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/audio_test/src/plot_audio_samples.py b/tinyusb/examples/device/audio_test/src/plot_audio_samples.py
deleted file mode 100755
index 6e3c4978..00000000
--- a/tinyusb/examples/device/audio_test/src/plot_audio_samples.py
+++ /dev/null
@@ -1,34 +0,0 @@
-import sounddevice as sd
-import matplotlib.pyplot as plt
-import numpy as np
-import platform
-
-if __name__ == '__main__':
-
-    # If you got "ValueError: No input device matching", that is because your PC name example device
-    # differently from tested list below. Uncomment the next line to see full list and try to pick correct one
-    # print(sd.query_devices())
-
-    fs = 48000           # Sample rate
-    duration = 100e-3    # Duration of recording
-
-    if platform.system() == 'Windows':
-        # MME is needed since there are more than one MicNode device APIs (at least in Windows)
-        device = 'Microphone (MicNode) MME'
-    elif platform.system() == 'Darwin':
-        device = 'MicNode'
-    else:
-        device ='default'
-
-    myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=1, dtype='int16', device=device)
-    print('Waiting...')
-    sd.wait()  # Wait until recording is finished
-    print('Done!')
-
-    time = np.arange(0, duration, 1 / fs)  # time vector
-    plt.plot(time, myrecording)
-    plt.xlabel('Time [s]')
-    plt.ylabel('Amplitude')
-    plt.title('MicNode')
-    plt.show()
-    
\ No newline at end of file
diff --git a/tinyusb/examples/device/audio_test/src/tusb_config.h b/tinyusb/examples/device/audio_test/src/tusb_config.h
deleted file mode 100755
index 683a1a56..00000000
--- a/tinyusb/examples/device/audio_test/src/tusb_config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-#error CFG_TUSB_MCU must be defined
-#endif
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
-
-#ifndef CFG_TUSB_DEBUG
-#define CFG_TUSB_DEBUG              0
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_AUDIO             1
-#define CFG_TUD_VENDOR            0
-
-//--------------------------------------------------------------------
-// AUDIO CLASS DRIVER CONFIGURATION
-//--------------------------------------------------------------------
-
-// Have a look into audio_device.h for all configurations
-
-#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                 TUD_AUDIO_MIC_ONE_CH_DESC_LEN
-#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                                 1                                       // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes)
-#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ                              64                                      // Size of control request buffer
-
-#define CFG_TUD_AUDIO_ENABLE_EP_IN                                    1
-#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX                    2                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below
-#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                            1                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor!
-#define CFG_TUD_AUDIO_EP_SZ_IN                                        48 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x 1 Channel
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN                  // Maximum EP IN size for all AS alternate settings used
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          CFG_TUD_AUDIO_EP_SZ_IN + 1
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/audio_test/src/usb_descriptors.c b/tinyusb/examples/device/audio_test/src/usb_descriptors.c
deleted file mode 100755
index 67dd34d2..00000000
--- a/tinyusb/examples/device/audio_test/src/usb_descriptors.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]     AUDIO | MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-    _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-enum
-{
-  ITF_NUM_AUDIO_CONTROL = 0,
-  ITF_NUM_AUDIO_STREAMING,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    	(TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-#define EPNUM_AUDIO   0x03
-#else
-#define EPNUM_AUDIO   0x01
-#endif
-
-uint8_t const desc_configuration[] =
-{
-    // Interface count, string index, total length, attribute, power in mA
-    TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-    // Interface number, string index, EP Out & EP In address, EP size
-    TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-    (const char[]) { 0x09, 0x04 }, 	// 0: is supported language is English (0x0409)
-    "PaniRCorp",                   	// 1: Manufacturer
-    "MicNode",              		// 2: Product
-    "123456",                      	// 3: Serials, should use chip ID
-    "UAC2",                 	 	// 4: Audio Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Convert ASCII string into UTF-16
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/board_test/CMakeLists.txt b/tinyusb/examples/device/board_test/CMakeLists.txt
deleted file mode 100755
index 37113578..00000000
--- a/tinyusb/examples/device/board_test/CMakeLists.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# Check for -DFAMILY=
-if(FAMILY MATCHES "^esp32s[2-3]")
-  # use BOARD-Directory name for project id
-  get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
-  set(PROJECT ${BOARD}-${PROJECT})
-
-  # TOP is absolute path to root directory of TinyUSB git repo
-  set(TOP "../../..")
-  get_filename_component(TOP "${TOP}" REALPATH)
-
-  project(${PROJECT})
-
-else()
-
-  # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-  family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-  project(${PROJECT})
-
-  # Checks this example is valid for the family and initializes the project
-  family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-  add_executable(${PROJECT})
-
-  # Example source
-  target_sources(${PROJECT} PUBLIC
-          ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-          )
-
-  # Example include
-  target_include_directories(${PROJECT} PUBLIC
-          ${CMAKE_CURRENT_SOURCE_DIR}/src
-          )
-
-  # Configure compilation flags and libraries for the example... see the corresponding function
-  # in hw/bsp/FAMILY/family.cmake for details.
-  family_configure_device_example(${PROJECT})
-endif()
diff --git a/tinyusb/examples/device/board_test/Makefile b/tinyusb/examples/device/board_test/Makefile
deleted file mode 100755
index b65575ce..00000000
--- a/tinyusb/examples/device/board_test/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-# board_test example is special example that doesn't enable device or host stack
-# This can cause some TinyUSB API missing, this hack to allow us to fill those API
-# to pass the compilation process
-CFLAGS +=	\
-	-D"tud_int_handler(x)= " \
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/board_test/sdkconfig.defaults b/tinyusb/examples/device/board_test/sdkconfig.defaults
deleted file mode 100755
index 83871619..00000000
--- a/tinyusb/examples/device/board_test/sdkconfig.defaults
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_IDF_CMAKE=y
-CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
diff --git a/tinyusb/examples/device/board_test/src/CMakeLists.txt b/tinyusb/examples/device/board_test/src/CMakeLists.txt
deleted file mode 100755
index e4e1f4e9..00000000
--- a/tinyusb/examples/device/board_test/src/CMakeLists.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-# FAMILY = esp32sx
-idf_component_register(SRCS "main.c"
-                    INCLUDE_DIRS "."
-                    REQUIRES freertos soc)
-                    
-file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
-
-if(EXISTS ${board_cmake})
-    include(${board_cmake})
-endif()
-
-idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH)
-target_include_directories(${COMPONENT_TARGET} PUBLIC
-  "${FREERTOS_ORIG_INCLUDE_PATH}"
-  "${TOP}/hw"
-  "${TOP}/src"
-)
diff --git a/tinyusb/examples/device/board_test/src/main.c b/tinyusb/examples/device/board_test/src/main.c
deleted file mode 100755
index c77dd564..00000000
--- a/tinyusb/examples/device/board_test/src/main.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : button is not pressed
- * - 1000 ms : button is pressed (and hold)
- */
-enum  {
-  BLINK_PRESSED = 250,
-  BLINK_UNPRESSED = 1000
-};
-
-#define HELLO_STR   "Hello from TinyUSB\r\n"
-
-int main(void)
-{
-  board_init();
-
-  uint32_t start_ms = 0;
-  bool led_state = false;
-
-  while (1)
-  {
-    uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED;
-
-    // Blink every interval ms
-    if ( !(board_millis() - start_ms < interval_ms) )
-    {
-      board_uart_write(HELLO_STR, strlen(HELLO_STR));
-
-      start_ms = board_millis();
-
-      board_led_write(led_state);
-      led_state = 1 - led_state; // toggle
-    }
-  }
-
-  return 0;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
-void app_main(void)
-{
-  main();
-}
-#endif
diff --git a/tinyusb/examples/device/board_test/src/tusb_config.h b/tinyusb/examples/device/board_test/src/tusb_config.h
deleted file mode 100755
index da33729e..00000000
--- a/tinyusb/examples/device/board_test/src/tusb_config.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-#ifndef CFG_TUSB_OS
-  #define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_NONE
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE   64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC             0
-#define CFG_TUD_MSC             0
-#define CFG_TUD_HID             0
-#define CFG_TUD_MIDI            0
-#define CFG_TUD_VENDOR          0
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt b/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/cdc_dual_ports/Makefile b/tinyusb/examples/device/cdc_dual_ports/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/cdc_dual_ports/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/cdc_dual_ports/src/main.c b/tinyusb/examples/device/cdc_dual_ports/src/main.c
deleted file mode 100755
index 34cd29ed..00000000
--- a/tinyusb/examples/device/cdc_dual_ports/src/main.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//------------- prototypes -------------//
-static void cdc_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    cdc_task();
-  }
-
-  return 0;
-}
-
-// echo to either Serial0 or Serial1
-// with Serial0 as all lower case, Serial1 as all upper case
-static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count)
-{
-  for(uint32_t i=0; i<count; i++)
-  {
-    if (itf == 0)
-    {
-      // echo back 1st port as lower case
-      if (isupper(buf[i])) buf[i] += 'a' - 'A';
-    }
-    else
-    {
-      // echo back 2nd port as upper case
-      if (islower(buf[i])) buf[i] -= 'a' - 'A';
-    }
-
-    tud_cdc_n_write_char(itf, buf[i]);
-  }
-  tud_cdc_n_write_flush(itf);
-}
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-static void cdc_task(void)
-{
-  uint8_t itf;
-
-  for (itf = 0; itf < CFG_TUD_CDC; itf++)
-  {
-    // connected() check for DTR bit
-    // Most but not all terminal client set this when making connection
-    // if ( tud_cdc_n_connected(itf) )
-    {
-      if ( tud_cdc_n_available(itf) )
-      {
-        uint8_t buf[64];
-
-        uint32_t count = tud_cdc_n_read(itf, buf, sizeof(buf));
-
-        // echo back to both serial ports
-        echo_serial_port(0, buf, count);
-        echo_serial_port(1, buf, count);
-      }
-    }
-  }
-}
diff --git a/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h b/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h
deleted file mode 100755
index ff8535d1..00000000
--- a/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               2
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// CDC FIFO size of TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// CDC Endpoint transfer buffer size, more is faster
-#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c b/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c
deleted file mode 100755
index b935b672..00000000
--- a/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]       MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-enum
-{
-  ITF_NUM_CDC_0 = 0,
-  ITF_NUM_CDC_0_DATA,
-  ITF_NUM_CDC_1,
-  ITF_NUM_CDC_1_DATA,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + CFG_TUD_CDC * TUD_CDC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  #define EPNUM_CDC_0_NOTIF   0x81
-  #define EPNUM_CDC_0_OUT     0x02
-  #define EPNUM_CDC_0_IN      0x82
-
-  #define EPNUM_CDC_1_NOTIF   0x84
-  #define EPNUM_CDC_1_OUT     0x05
-  #define EPNUM_CDC_1_IN      0x85
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
-  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_CDC_0_NOTIF   0x81
-  #define EPNUM_CDC_0_OUT     0x02
-  #define EPNUM_CDC_0_IN      0x83
-
-  #define EPNUM_CDC_1_NOTIF   0x84
-  #define EPNUM_CDC_1_OUT     0x05
-  #define EPNUM_CDC_1_IN      0x86
-
-#else
-  #define EPNUM_CDC_0_NOTIF   0x81
-  #define EPNUM_CDC_0_OUT     0x02
-  #define EPNUM_CDC_0_IN      0x82
-
-  #define EPNUM_CDC_1_NOTIF   0x83
-  #define EPNUM_CDC_1_OUT     0x04
-  #define EPNUM_CDC_1_IN      0x84
-#endif
-
-uint8_t const desc_fs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64),
-
-  // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64),
-};
-
-#if TUD_OPT_HIGH_SPEED
-uint8_t const desc_hs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512),
-
-  // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512),
-};
-#endif
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-
-#if TUD_OPT_HIGH_SPEED
-  // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB CDC",                 // 4: CDC Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/cdc_msc/.skip.MCU_SAMD11 b/tinyusb/examples/device/cdc_msc/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc/CMakeLists.txt b/tinyusb/examples/device/cdc_msc/CMakeLists.txt
deleted file mode 100755
index fa6e83b7..00000000
--- a/tinyusb/examples/device/cdc_msc/CMakeLists.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/cdc_msc/Makefile b/tinyusb/examples/device/cdc_msc/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/cdc_msc/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/cdc_msc/src/main.c b/tinyusb/examples/device/cdc_msc/src/main.c
deleted file mode 100755
index 131ae654..00000000
--- a/tinyusb/examples/device/cdc_msc/src/main.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-void cdc_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-
-    cdc_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-void cdc_task(void)
-{
-  // connected() check for DTR bit
-  // Most but not all terminal client set this when making connection
-  // if ( tud_cdc_connected() )
-  {
-    // connected and there are data available
-    if ( tud_cdc_available() )
-    {
-      // read datas
-      char buf[64];
-      uint32_t count = tud_cdc_read(buf, sizeof(buf));
-      (void) count;
-
-      // Echo back
-      // Note: Skip echo by commenting out write() and write_flush()
-      // for throughput test e.g
-      //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
-      tud_cdc_write(buf, count);
-      tud_cdc_write_flush();
-    }
-  }
-}
-
-// Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
-{
-  (void) itf;
-  (void) rts;
-
-  // TODO set some indicator
-  if ( dtr )
-  {
-    // Terminal connected
-  }else
-  {
-    // Terminal disconnected
-  }
-}
-
-// Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
-  (void) itf;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/cdc_msc/src/msc_disk.c b/tinyusb/examples/device/cdc_msc/src/msc_disk.c
deleted file mode 100755
index 503baace..00000000
--- a/tinyusb/examples/device/cdc_msc/src/msc_disk.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#if CFG_TUD_MSC
-
-// whether host does safe-eject
-static bool ejected = false;
-
-// Some MCU doesn't have enough 8KB SRAM to store the whole disk
-// We will use Flash as read-only disk with board that has
-// CFG_EXAMPLE_MSC_READONLY defined
-
-#define README_CONTENTS \
-"This is tinyusb's MassStorage Class demo.\r\n\r\n\
-If you find any bugs or get any questions, feel free to file an\r\n\
-issue at github.com/hathach/tinyusb"
-
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
-  DISK_BLOCK_SIZE = 512
-};
-
-#ifdef CFG_EXAMPLE_MSC_READONLY
-const
-#endif
-uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
-  //------------- Block0: Boot Sector -------------//
-  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
-  // sector_per_cluster = 1; reserved_sectors = 1;
-  // fat_num            = 1; fat12_root_entry_num = 16;
-  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
-  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
-  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
-  // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
-
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
-
-  //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
-  },
-
-  //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
-  },
-
-  //------------- Block3: Readme Content -------------//
-  README_CONTENTS
-};
-
-// Invoked when received SCSI_CMD_INQUIRY
-// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
-  (void) lun;
-
-  const char vid[] = "TinyUSB";
-  const char pid[] = "Mass Storage";
-  const char rev[] = "1.0";
-
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
-  memcpy(product_rev, rev, strlen(rev));
-}
-
-// Invoked when received Test Unit Ready command.
-// return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
-  (void) lun;
-
-  // RAM disk is ready until ejected
-  if (ejected) {
-    tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00);
-    return false;
-  }
-
-  return true;
-}
-
-// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
-// Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
-  (void) lun;
-
-  *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
-}
-
-// Invoked when received Start Stop Unit command
-// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
-// - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
-  (void) lun;
-  (void) power_condition;
-
-  if ( load_eject )
-  {
-    if (start)
-    {
-      // load disk storage
-    }else
-    {
-      // unload disk storage
-      ejected = true;
-    }
-  }
-
-  return true;
-}
-
-// Callback invoked when received READ10 command.
-// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-  uint8_t const* addr = msc_disk[lba] + offset;
-  memcpy(buffer, addr, bufsize);
-
-  return bufsize;
-}
-
-// Callback invoked when received WRITE10 command.
-// Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
-  memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
-
-  return bufsize;
-}
-
-// Callback invoked when received an SCSI command not in built-in list below
-// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
-// - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
-
-  void const* response = NULL;
-  uint16_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
-    default:
-      // Set Sense = Invalid Command Operation
-      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
-
-      // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
-  }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, resplen);
-    }else
-    {
-      // SCSI output
-    }
-  }
-
-  return resplen;
-}
-
-#endif
diff --git a/tinyusb/examples/device/cdc_msc/src/tusb_config.h b/tinyusb/examples/device/cdc_msc/src/tusb_config.h
deleted file mode 100755
index bf6af06b..00000000
--- a/tinyusb/examples/device/cdc_msc/src/tusb_config.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-// This example doesn't use an RTOS
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC              1
-#define CFG_TUD_MSC              1
-#define CFG_TUD_HID              0
-#define CFG_TUD_MIDI             0
-#define CFG_TUD_VENDOR           0
-
-// CDC FIFO size of TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// CDC Endpoint transfer buffer size, more is faster
-#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// MSC Buffer size of Device Mass storage
-#define CFG_TUD_MSC_EP_BUFSIZE   512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c b/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c
deleted file mode 100755
index 1a89ce56..00000000
--- a/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_CDC = 0,
-  ITF_NUM_CDC_DATA,
-  ITF_NUM_MSC,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x82
-
-  #define EPNUM_MSC_OUT     0x05
-  #define EPNUM_MSC_IN      0x85
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
-  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x83
-
-  #define EPNUM_MSC_OUT     0x04
-  #define EPNUM_MSC_IN      0x85
-
-#elif CFG_TUSB_MCU == OPT_MCU_CXD56
-  // CXD56 doesn't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number
-  // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN)
-  #define EPNUM_CDC_NOTIF   0x83
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x81
-
-  #define EPNUM_MSC_OUT     0x05
-  #define EPNUM_MSC_IN      0x84
-
-#else
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x82
-
-  #define EPNUM_MSC_OUT     0x03
-  #define EPNUM_MSC_IN      0x83
-
-#endif
-
-uint8_t const desc_fs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
-};
-
-#if TUD_OPT_HIGH_SPEED
-uint8_t const desc_hs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
-};
-#endif
-
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-
-#if TUD_OPT_HIGH_SPEED
-  // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB CDC",                 // 4: CDC Interface
-  "TinyUSB MSC",                 // 5: MSC Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_CXD56
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_EFM32GG12
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_RP2040
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI b/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI
+++ /dev/null
diff --git a/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt
deleted file mode 100755
index 639dde99..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-# TOP is absolute path to root directory of TinyUSB git repo
-# needed for esp32sx build. TOOD could be removed later on
-set(TOP "../../..")
-get_filename_component(TOP "${TOP}" REALPATH)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-# Check for -DFAMILY=
-if(FAMILY MATCHES "^esp32s[2-3]")
-else()
-  message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
-endif()
diff --git a/tinyusb/examples/device/cdc_msc_freertos/Makefile b/tinyusb/examples/device/cdc_msc_freertos/Makefile
deleted file mode 100755
index 86bacd2d..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-DEPS_SUBMODULES += lib/FreeRTOS-Kernel
-
-include ../../../tools/top.mk
-include ../../make.mk
-
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-
-INC += \
-	src \
-	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)
-	
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c))
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS += -Wl,--undefined=vTaskSwitchContext
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults b/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults
deleted file mode 100755
index 83871619..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_IDF_CMAKE=y
-CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt b/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt
deleted file mode 100755
index 6b188fd3..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-idf_component_register(SRCS "main.c" "usb_descriptors.c" "msc_disk.c"
-                    INCLUDE_DIRS "."
-                    REQUIRES freertos soc)
-
-file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
-
-if(EXISTS ${board_cmake})
-    include(${board_cmake})
-endif()
-
-idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH)
-target_include_directories(${COMPONENT_TARGET} PUBLIC
-  "${FREERTOS_ORIG_INCLUDE_PATH}"
-  "${TOP}/hw"
-  "${TOP}/src"
-)
-
-target_sources(${COMPONENT_TARGET} PUBLIC
-  "${TOP}/src/tusb.c"
-  "${TOP}/src/common/tusb_fifo.c"
-  "${TOP}/src/device/usbd.c"
-  "${TOP}/src/device/usbd_control.c"
-  "${TOP}/src/class/cdc/cdc_device.c"
-  "${TOP}/src/class/dfu/dfu_rt_device.c"
-  "${TOP}/src/class/hid/hid_device.c"
-  "${TOP}/src/class/midi/midi_device.c"
-  "${TOP}/src/class/msc/msc_device.c"
-  "${TOP}/src/class/net/net_device.c"
-  "${TOP}/src/class/usbtmc/usbtmc_device.c"
-  "${TOP}/src/class/vendor/vendor_device.c"
-  "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c"
-)
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h b/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h
deleted file mode 100755
index 568b27a1..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-extern uint32_t SystemCoreClock;
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( 0*1024 ) // dynamic is not used
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               2
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-/* Define to trap errors during development. */
-// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
-#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
-  #define configASSERT(_exp) \
-    do {\
-      if ( !(_exp) ) { \
-        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
-        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
-          taskDISABLE_INTERRUPTS(); \
-           __asm("BKPT #0\n"); \
-        }\
-      }\
-    } while(0)
-#else
-  #define configASSERT( x )
-#endif
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					INT_Excep_ICU_SWINT
-#define vTickISR								INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				(configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c b/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c
deleted file mode 100755
index ab885947..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-//--------------------------------------------------------------------+
-// INCLUDE
-//--------------------------------------------------------------------+
-#include "FreeRTOS.h"
-#include "task.h"
-#include "common/tusb_common.h"
-
-
-void vApplicationMallocFailedHook(void)
-{
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
-{
-  (void) pxTask;
-  (void) pcTaskName;
-
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
- * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
- * used by the Idle task. */
-void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
-{
-  /* If the buffers to be provided to the Idle task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xIdleTaskTCB;
-  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
-    state will be stored. */
-  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
-
-  /* Pass out the array that will be used as the Idle task's stack. */
-  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
-  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
-}
-
-/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
- * application must provide an implementation of vApplicationGetTimerTaskMemory()
- * to provide the memory that is used by the Timer service task. */
-void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
-{
-  /* If the buffers to be provided to the Timer task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xTimerTaskTCB;
-  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Timer
-    task's state will be stored. */
-  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
-
-  /* Pass out the array that will be used as the Timer task's stack. */
-  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
-  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
-#include "iodefine.h"
-void vApplicationSetupTimerInterrupt(void)
-{
-  /* Enable CMT0 */
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
-  MSTP(CMT0)       = 0;
-  SYSTEM.PRCR.WORD = (0xA5u<<8);
-
-  CMT0.CMCNT      = 0;
-  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
-  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
-  IR(CMT0, CMI0)  = 0;
-  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
-  IEN(CMT0, CMI0) = 1;
-  CMT.CMSTR0.BIT.STR0 = 1;
-}
-#endif
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/main.c b/tinyusb/examples/device/cdc_msc_freertos/src/main.c
deleted file mode 100755
index c27b7fed..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/main.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "FreeRTOS.h"
-#include "task.h"
-#include "timers.h"
-#include "queue.h"
-#include "semphr.h"
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-// static timer
-StaticTimer_t blinky_tmdef;
-TimerHandle_t blinky_tm;
-
-// static task for usbd
-// Increase stack size when debug log is enabled
-#if CFG_TUSB_DEBUG
-  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE)
-#else
-  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE/2)
-#endif
-
-StackType_t  usb_device_stack[USBD_STACK_SIZE];
-StaticTask_t usb_device_taskdef;
-
-// static task for cdc
-#define CDC_STACK_SZIE      configMINIMAL_STACK_SIZE
-StackType_t  cdc_stack[CDC_STACK_SZIE];
-StaticTask_t cdc_taskdef;
-
-
-void led_blinky_cb(TimerHandle_t xTimer);
-void usb_device_task(void* param);
-void cdc_task(void* params);
-
-//--------------------------------------------------------------------+
-// Main
-//--------------------------------------------------------------------+
-
-int main(void)
-{
-  board_init();
-
-  // soft timer for blinky
-  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
-  xTimerStart(blinky_tm, 0);
-
-  // Create a task for tinyusb device stack
-  (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef);
-
-  // Create CDC task
-  (void) xTaskCreateStatic( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef);
-
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if CFG_TUSB_MCU != OPT_MCU_ESP32S2 && CFG_TUSB_MCU != OPT_MCU_ESP32S3
-  vTaskStartScheduler();
-#endif
-
-  return 0;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
-void app_main(void)
-{
-  main();
-}
-#endif
-
-// USB Device Driver task
-// This top level thread process all usb events and invoke callbacks
-void usb_device_task(void* param)
-{
-  (void) param;
-
-  // This should be called after scheduler/kernel is started.
-  // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tusb_init();
-
-  // RTOS forever loop
-  while (1)
-  {
-    // tinyusb device task
-    tud_task();
-  }
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0);
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0);
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
-}
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-void cdc_task(void* params)
-{
-  (void) params;
-
-  // RTOS forever loop
-  while ( 1 )
-  {
-    // connected() check for DTR bit
-    // Most but not all terminal client set this when making connection
-    // if ( tud_cdc_connected() )
-    {
-      // There are data available
-      if ( tud_cdc_available() )
-      {
-        uint8_t buf[64];
-
-        // read and echo back
-        uint32_t count = tud_cdc_read(buf, sizeof(buf));
-        (void) count;
-
-        // Echo back
-        // Note: Skip echo by commenting out write() and write_flush()
-        // for throughput test e.g
-        //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
-        tud_cdc_write(buf, count);
-        tud_cdc_write_flush();
-      }
-    }
-
-    // For ESP32-S2 this delay is essential to allow idle how to run and reset wdt
-    vTaskDelay(pdMS_TO_TICKS(10));
-  }
-}
-
-// Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
-{
-  (void) itf;
-  (void) rts;
-
-  // TODO set some indicator
-  if ( dtr )
-  {
-    // Terminal connected
-  }else
-  {
-    // Terminal disconnected
-  }
-}
-
-// Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
-  (void) itf;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinky_cb(TimerHandle_t xTimer)
-{
-  (void) xTimer;
-  static bool led_state = false;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c b/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c
deleted file mode 100755
index 5aa7befc..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#if CFG_TUD_MSC
-
-// Some MCU doesn't have enough 8KB SRAM to store the whole disk
-// We will use Flash as read-only disk with board that has
-// CFG_EXAMPLE_MSC_READONLY defined
-
-#define README_CONTENTS \
-"This is tinyusb's MassStorage Class demo.\r\n\r\n\
-If you find any bugs or get any questions, feel free to file an\r\n\
-issue at github.com/hathach/tinyusb"
-
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
-  DISK_BLOCK_SIZE = 512
-};
-
-#ifdef CFG_EXAMPLE_MSC_READONLY
-const
-#endif
-uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
-  //------------- Block0: Boot Sector -------------//
-  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
-  // sector_per_cluster = 1; reserved_sectors = 1;
-  // fat_num            = 1; fat12_root_entry_num = 16;
-  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
-  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
-  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
-  // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
-
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
-
-  //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
-  },
-
-  //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
-  },
-
-  //------------- Block3: Readme Content -------------//
-  README_CONTENTS
-};
-
-// Invoked when received SCSI_CMD_INQUIRY
-// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
-  (void) lun;
-
-  const char vid[] = "TinyUSB";
-  const char pid[] = "Mass Storage";
-  const char rev[] = "1.0";
-
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
-  memcpy(product_rev, rev, strlen(rev));
-}
-
-// Invoked when received Test Unit Ready command.
-// return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
-  (void) lun;
-
-  return true; // RAM disk is always ready
-}
-
-// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
-// Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
-  (void) lun;
-
-  *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
-}
-
-// Invoked when received Start Stop Unit command
-// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
-// - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
-  (void) lun;
-  (void) power_condition;
-
-  if ( load_eject )
-  {
-    if (start)
-    {
-      // load disk storage
-    }else
-    {
-      // unload disk storage
-    }
-  }
-
-  return true;
-}
-
-// Callback invoked when received READ10 command.
-// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-  uint8_t const* addr = msc_disk[lba] + offset;
-  memcpy(buffer, addr, bufsize);
-
-  return bufsize;
-}
-
-// Callback invoked when received WRITE10 command.
-// Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
-  memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
-
-  return bufsize;
-}
-
-// Callback invoked when received an SCSI command not in built-in list below
-// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
-// - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
-
-  void const* response = NULL;
-  uint16_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
-    default:
-      // Set Sense = Invalid Command Operation
-      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
-
-      // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
-  }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, resplen);
-    }else
-    {
-      // SCSI output
-    }
-  }
-
-  return resplen;
-}
-
-#endif
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h b/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h
deleted file mode 100755
index ff543834..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-// This examples use FreeRTOS
-#define CFG_TUSB_OS               OPT_OS_FREERTOS
-
-// can be defined by compiler in DEBUG build
-#ifndef CFG_TUSB_DEBUG
-  #define CFG_TUSB_DEBUG           0
-#endif
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC              1
-#define CFG_TUD_MSC              1
-#define CFG_TUD_HID              0
-#define CFG_TUD_MIDI             0
-#define CFG_TUD_VENDOR           0
-
-// CDC FIFO size of TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// CDC Endpoint transfer buffer size, more is faster
-#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// MSC Buffer size of Device Mass storage
-#define CFG_TUD_MSC_EP_BUFSIZE   512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c
deleted file mode 100755
index 75b5ce7b..00000000
--- a/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_CDC = 0,
-  ITF_NUM_CDC_DATA,
-  ITF_NUM_MSC,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x82
-
-  #define EPNUM_MSC_OUT     0x05
-  #define EPNUM_MSC_IN      0x85
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG
-  // SAMG doesn't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x83
-
-  #define EPNUM_MSC_OUT     0x04
-  #define EPNUM_MSC_IN      0x85
-
-#else
-  #define EPNUM_CDC_NOTIF   0x81
-  #define EPNUM_CDC_OUT     0x02
-  #define EPNUM_CDC_IN      0x82
-
-  #define EPNUM_MSC_OUT     0x03
-  #define EPNUM_MSC_IN      0x83
-
-#endif
-
-uint8_t const desc_fs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
-};
-
-#if TUD_OPT_HIGH_SPEED
-uint8_t const desc_hs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
-};
-#endif
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-
-#if TUD_OPT_HIGH_SPEED
-  // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB CDC",                 // 4: CDC Interface
-  "TinyUSB MSC",                 // 5: MSC Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/dfu/CMakeLists.txt b/tinyusb/examples/device/dfu/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/dfu/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/dfu/Makefile b/tinyusb/examples/device/dfu/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/dfu/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/dfu/src/main.c b/tinyusb/examples/device/dfu/src/main.c
deleted file mode 100755
index 5c846452..00000000
--- a/tinyusb/examples/device/dfu/src/main.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
- /*
-  * After device is enumerated in dfu mode run the following commands
-  *
-  * To transfer firmware from host to device (best to test with text file)
-  *
-  * $ dfu-util -d cafe -a 0 -D [filename]
-  * $ dfu-util -d cafe -a 1 -D [filename]
-  *
-  * To transfer firmware from device to host:
-  *
-  * $ dfu-util -d cafe -a 0 -U [filename]
-  * $ dfu-util -d cafe -a 1 -U [filename]
-  *
-  */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-const char* upload_image[2]=
-{
-  "Hello world from TinyUSB DFU! - Partition 0",
-  "Hello world from TinyUSB DFU! - Partition 1"
-};
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// DFU callbacks
-// Note: alt is used as the partition number, in order to support multiple partitions like FLASH, EEPROM, etc.
-//--------------------------------------------------------------------+
-
-// Invoked right before tud_dfu_download_cb() (state=DFU_DNBUSY) or tud_dfu_manifest_cb() (state=DFU_MANIFEST)
-// Application return timeout in milliseconds (bwPollTimeout) for the next download/manifest operation.
-// During this period, USB host won't try to communicate with us.
-uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state)
-{
-  if ( state == DFU_DNBUSY )
-  {
-    // For this example
-    // - Atl0 Flash is fast : 1   ms
-    // - Alt1 EEPROM is slow: 100 ms
-    return (alt == 0) ? 1 : 100;
-  }
-  else if (state == DFU_MANIFEST)
-  {
-    // since we don't buffer entire image and do any flashing in manifest stage
-    return 0;
-  }
-
-  return 0;
-}
-
-// Invoked when received DFU_DNLOAD (wLength>0) following by DFU_GETSTATUS (state=DFU_DNBUSY) requests
-// This callback could be returned before flashing op is complete (async).
-// Once finished flashing, application must call tud_dfu_finish_flashing()
-void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, uint8_t const* data, uint16_t length)
-{
-  (void) alt;
-  (void) block_num;
-
-  //printf("\r\nReceived Alt %u BlockNum %u of length %u\r\n", alt, wBlockNum, length);
-
-  for(uint16_t i=0; i<length; i++)
-  {
-    printf("%c", data[i]);
-  }
-
-  // flashing op for download complete without error
-  tud_dfu_finish_flashing(DFU_STATUS_OK);
-}
-
-// Invoked when download process is complete, received DFU_DNLOAD (wLength=0) following by DFU_GETSTATUS (state=Manifest)
-// Application can do checksum, or actual flashing if buffered entire image previously.
-// Once finished flashing, application must call tud_dfu_finish_flashing()
-void tud_dfu_manifest_cb(uint8_t alt)
-{
-  (void) alt;
-  printf("Download completed, enter manifestation\r\n");
-
-  // flashing op for manifest is complete without error
-  // Application can perform checksum, should it fail, use appropriate status such as errVERIFY.
-  tud_dfu_finish_flashing(DFU_STATUS_OK);
-}
-
-// Invoked when received DFU_UPLOAD request
-// Application must populate data with up to length bytes and
-// Return the number of written bytes
-uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t* data, uint16_t length)
-{
-  (void) block_num;
-  (void) length;
-
-  uint16_t const xfer_len = (uint16_t) strlen(upload_image[alt]);
-  memcpy(data, upload_image[alt], xfer_len);
-
-  return xfer_len;
-}
-
-// Invoked when the Host has terminated a download or upload transfer
-void tud_dfu_abort_cb(uint8_t alt)
-{
-  (void) alt;
-  printf("Host aborted transfer\r\n");
-}
-
-// Invoked when a DFU_DETACH request is received
-void tud_dfu_detach_cb(void)
-{
-  printf("Host detach, we should probably reboot\r\n");
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK + Indicator pulse
-//--------------------------------------------------------------------+
-
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/dfu/src/tusb_config.h b/tinyusb/examples/device/dfu/src/tusb_config.h
deleted file mode 100755
index 66e35702..00000000
--- a/tinyusb/examples/device/dfu/src/tusb_config.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * tusb_config.h
- *
- *  Created on: May 5, 2021
- *      Author: Jeremiah McCarthy
- */
-
-#ifndef TUSB_CONFIG_H_
-#define TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_DFU    1
-
-// DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR
-#define CFG_TUD_DFU_XFER_BUFSIZE    512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/dfu/src/usb_descriptors.c b/tinyusb/examples/device/dfu/src/usb_descriptors.c
deleted file mode 100755
index 1cfe29c5..00000000
--- a/tinyusb/examples/device/dfu/src/usb_descriptors.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "class/dfu/dfu_device.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-  #if CFG_TUD_CDC
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-  #else
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-  #endif
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-// Number of Alternate Interface (each for 1 flash partition)
-#define ALT_COUNT   2
-
-enum
-{
-  ITF_NUM_DFU_MODE,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_DFU_DESC_LEN(ALT_COUNT))
-
-#define FUNC_ATTRS (DFU_ATTR_CAN_UPLOAD | DFU_ATTR_CAN_DOWNLOAD | DFU_ATTR_MANIFESTATION_TOLERANT)
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size
-  TUD_DFU_DESCRIPTOR(ITF_NUM_DFU_MODE, ALT_COUNT, 4, FUNC_ATTRS, 1000, CFG_TUD_DFU_XFER_BUFSIZE),
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "FLASH",                       // 4: DFU Partition 1
-  "EEPROM",                      // 5: DFU Partition 2
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  size_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }
-  else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) {
-      chr_count = 31;
-    }
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/dfu_runtime/CMakeLists.txt b/tinyusb/examples/device/dfu_runtime/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/dfu_runtime/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/dfu_runtime/Makefile b/tinyusb/examples/device/dfu_runtime/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/dfu_runtime/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/dfu_runtime/src/main.c b/tinyusb/examples/device/dfu_runtime/src/main.c
deleted file mode 100755
index 823c71ae..00000000
--- a/tinyusb/examples/device/dfu_runtime/src/main.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-/* After device is enumerated, run following command
- *
- * $ dfu-util -l
- *
- * It should be able to list our device as in Runtime mode. Then run
- *
- * $ dfu-util -e
- *
- * This will send DETTACH command to put device into bootloader. Since this example
- * is minimal, it doesn't actually go into DFU mode but rather change the LED blinking
- * pattern to fast rate as indicator.
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 1000 ms : device should reboot
- * - 250 ms  : device not mounted
- * - 0 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_DFU_MODE = 100,
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked on DFU_DETACH request to reboot to the bootloader
-void tud_dfu_runtime_reboot_to_dfu_cb(void)
-{
-  blink_interval_ms = BLINK_DFU_MODE;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK + Indicator pulse
-//--------------------------------------------------------------------+
-
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/dfu_runtime/src/tusb_config.h b/tinyusb/examples/device/dfu_runtime/src/tusb_config.h
deleted file mode 100755
index bdae1d2e..00000000
--- a/tinyusb/examples/device/dfu_runtime/src/tusb_config.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * tusb_config.h
- *
- *  Created on: Oct 28, 2019
- *      Author: Sylvain Munaut
- */
-
-#ifndef TUSB_CONFIG_H_
-#define TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-
-#define CFG_TUD_DFU_RUNTIME 1
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c b/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c
deleted file mode 100755
index 8b2bd265..00000000
--- a/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "class/dfu/dfu_rt_device.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-  #if CFG_TUD_CDC
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-  #else
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-  #endif
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_DFU_RT,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_DFU_RT_DESC_LEN)
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, attributes, detach timeout, transfer size */
-  TUD_DFU_RT_DESCRIPTOR(ITF_NUM_DFU_RT, 4, 0x0d, 1000, 4096),
-};
-
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB DFU runtime",         // 4: DFU runtime
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  size_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }
-  else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) {
-      chr_count = 31;
-    }
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/dynamic_configuration/.skip.MCU_SAMD11 b/tinyusb/examples/device/dynamic_configuration/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/dynamic_configuration/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt b/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt
deleted file mode 100755
index fa6e83b7..00000000
--- a/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/dynamic_configuration/Makefile b/tinyusb/examples/device/dynamic_configuration/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/dynamic_configuration/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/dynamic_configuration/src/main.c b/tinyusb/examples/device/dynamic_configuration/src/main.c
deleted file mode 100755
index 4c10f55b..00000000
--- a/tinyusb/examples/device/dynamic_configuration/src/main.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-void cdc_task(void);
-void midi_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-    cdc_task();
-    midi_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-void cdc_task(void)
-{
-  if ( tud_cdc_connected() )
-  {
-    // connected and there are data available
-    if ( tud_cdc_available() )
-    {
-      uint8_t buf[64];
-
-      // read and echo back
-      uint32_t count = tud_cdc_read(buf, sizeof(buf));
-
-      for(uint32_t i=0; i<count; i++)
-      {
-        tud_cdc_write_char(buf[i]);
-
-        if ( buf[i] == '\r' ) tud_cdc_write_char('\n');
-      }
-
-      tud_cdc_write_flush();
-    }
-  }
-}
-
-// Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
-{
-  (void) itf;
-
-  // connected
-  if ( dtr && rts )
-  {
-    // print initial message when connected
-    tud_cdc_write_str("\r\nTinyUSB CDC MSC device example\r\n");
-  }
-}
-
-// Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
-  (void) itf;
-}
-
-//--------------------------------------------------------------------+
-// MIDI Task
-//--------------------------------------------------------------------+
-
-// Variable that holds the current position in the sequence.
-uint32_t note_pos = 0;
-
-// Store example melody as an array of note values
-static const uint8_t note_sequence[] =
-{
-  74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78,
-  74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61,
-  56,61,64,68,74,78,81,86,90,93,98,102
-};
-
-void midi_task(void)
-{
-  static uint32_t start_ms = 0;
-
-  uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint
-  uint8_t const channel   = 0; // 0 for channel 1
-
-  // The MIDI interface always creates input and output port/jack descriptors
-  // regardless of these being used or not. Therefore incoming traffic should be read
-  // (possibly just discarded) to avoid the sender blocking in IO
-  uint8_t packet[4];
-  while( tud_midi_available() ) tud_midi_packet_read(packet);
-
-  // send note every 1000 ms
-  if (board_millis() - start_ms < 286) return; // not enough time
-  start_ms += 286;
-
-  // Previous positions in the note sequence.
-  int previous = note_pos - 1;
-
-  // If we currently are at position 0, set the
-  // previous position to the last note in the sequence.
-  if (previous < 0) previous = sizeof(note_sequence) - 1;
-
-  // Send Note On for current position at full velocity (127) on channel 1.
-  uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 };
-  tud_midi_stream_write(cable_num, note_on, 3);
-
-  // Send Note Off for previous note.
-  uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0};
-  tud_midi_stream_write(cable_num, note_off, 3);
-
-  // Increment position
-  note_pos++;
-
-  // If we are at the end of the sequence, start over.
-  if (note_pos >= sizeof(note_sequence)) note_pos = 0;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c b/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c
deleted file mode 100755
index 5aa7befc..00000000
--- a/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#if CFG_TUD_MSC
-
-// Some MCU doesn't have enough 8KB SRAM to store the whole disk
-// We will use Flash as read-only disk with board that has
-// CFG_EXAMPLE_MSC_READONLY defined
-
-#define README_CONTENTS \
-"This is tinyusb's MassStorage Class demo.\r\n\r\n\
-If you find any bugs or get any questions, feel free to file an\r\n\
-issue at github.com/hathach/tinyusb"
-
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
-  DISK_BLOCK_SIZE = 512
-};
-
-#ifdef CFG_EXAMPLE_MSC_READONLY
-const
-#endif
-uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
-  //------------- Block0: Boot Sector -------------//
-  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
-  // sector_per_cluster = 1; reserved_sectors = 1;
-  // fat_num            = 1; fat12_root_entry_num = 16;
-  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
-  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
-  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
-  // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
-
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
-
-  //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
-  },
-
-  //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
-  },
-
-  //------------- Block3: Readme Content -------------//
-  README_CONTENTS
-};
-
-// Invoked when received SCSI_CMD_INQUIRY
-// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
-  (void) lun;
-
-  const char vid[] = "TinyUSB";
-  const char pid[] = "Mass Storage";
-  const char rev[] = "1.0";
-
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
-  memcpy(product_rev, rev, strlen(rev));
-}
-
-// Invoked when received Test Unit Ready command.
-// return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
-  (void) lun;
-
-  return true; // RAM disk is always ready
-}
-
-// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
-// Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
-  (void) lun;
-
-  *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
-}
-
-// Invoked when received Start Stop Unit command
-// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
-// - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
-  (void) lun;
-  (void) power_condition;
-
-  if ( load_eject )
-  {
-    if (start)
-    {
-      // load disk storage
-    }else
-    {
-      // unload disk storage
-    }
-  }
-
-  return true;
-}
-
-// Callback invoked when received READ10 command.
-// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-  uint8_t const* addr = msc_disk[lba] + offset;
-  memcpy(buffer, addr, bufsize);
-
-  return bufsize;
-}
-
-// Callback invoked when received WRITE10 command.
-// Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
-  (void) lun;
-
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
-  memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
-
-  return bufsize;
-}
-
-// Callback invoked when received an SCSI command not in built-in list below
-// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
-// - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
-
-  void const* response = NULL;
-  uint16_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
-    default:
-      // Set Sense = Invalid Command Operation
-      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
-
-      // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
-  }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, resplen);
-    }else
-    {
-      // SCSI output
-    }
-  }
-
-  return resplen;
-}
-
-#endif
diff --git a/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h b/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h
deleted file mode 100755
index 23073faf..00000000
--- a/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               1
-#define CFG_TUD_MSC               1
-#define CFG_TUD_MIDI              1
-#define CFG_TUD_HID               0
-#define CFG_TUD_VENDOR            0
-
-// CDC FIFO size of TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE    (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_CDC_TX_BUFSIZE    (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// MIDI FIFO size of TX and RX
-#define CFG_TUD_MIDI_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_MIDI_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// MSC Buffer size of Device Mass storage
-#define CFG_TUD_MSC_EP_BUFSIZE    512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c b/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c
deleted file mode 100755
index 9ccb3765..00000000
--- a/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "bsp/board.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-// Configuration mode
-// 0 : enumerated as CDC/MIDI. Board button is not pressed when enumerating
-// 1 : enumerated as MSC. Board button is pressed when enumerating
-static uint32_t mode = 0;
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device_0 =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-tusb_desc_device_t const desc_device_1 =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0,
-    .bDeviceSubClass    = 0,
-    .bDeviceProtocol    = 0,
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID + 11, // should be different PID than desc0
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  mode = board_button_read();
-  return (uint8_t const*) (mode ? &desc_device_1 : &desc_device_0);
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_0_NUM_CDC = 0,
-  ITF_0_NUM_CDC_DATA,
-  ITF_0_NUM_MIDI,
-  ITF_0_NUM_MIDI_STREAMING,
-  ITF_0_NUM_TOTAL
-};
-
-enum
-{
-  ITF_1_NUM_MSC = 0,
-  ITF_1_NUM_TOTAL
-};
-
-#define CONFIG_0_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MIDI_DESC_LEN)
-#define CONFIG_1_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
-  #define EPNUM_0_CDC_NOTIF   0x81
-  #define EPNUM_0_CDC_OUT     0x02
-  #define EPNUM_0_CDC_IN      0x82
-
-  #define EPNUM_0_MIDI_OUT    0x05
-  #define EPNUM_0_MIDI_IN     0x85
-
-  #define EPNUM_1_MSC_OUT     0x02
-  #define EPNUM_1_MSC_IN      0x82
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG
-  // SAMG doesn't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_0_CDC_NOTIF   0x81
-  #define EPNUM_0_CDC_OUT     0x02
-  #define EPNUM_0_CDC_IN      0x83
-
-  #define EPNUM_0_MIDI_OUT    0x04
-  #define EPNUM_0_MIDI_IN     0x85
-
-  #define EPNUM_1_MSC_OUT     0x01
-  #define EPNUM_1_MSC_IN      0x82
-
-#else
-  #define EPNUM_0_CDC_NOTIF   0x81
-  #define EPNUM_0_CDC_OUT     0x02
-  #define EPNUM_0_CDC_IN      0x82
-
-  #define EPNUM_0_MIDI_OUT    0x03
-  #define EPNUM_0_MIDI_IN     0x83
-
-  #define EPNUM_1_MSC_OUT     0x01
-  #define EPNUM_1_MSC_IN      0x81
-#endif
-
-uint8_t const desc_configuration_0[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_0_NUM_TOTAL, 0, CONFIG_0_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
-};
-
-
-uint8_t const desc_configuraiton_1[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_1_NUM_TOTAL, 0, CONFIG_1_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
-};
-
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return mode ? desc_configuraiton_1 : desc_configuration_0;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt b/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/hid_boot_interface/Makefile b/tinyusb/examples/device/hid_boot_interface/Makefile
deleted file mode 100755
index 138c2784..00000000
--- a/tinyusb/examples/device/hid_boot_interface/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += \
-	src/main.c \
-	src/usb_descriptors.c
-	
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/hid_boot_interface/src/main.c b/tinyusb/examples/device/hid_boot_interface/src/main.c
deleted file mode 100755
index e5e2f685..00000000
--- a/tinyusb/examples/device/hid_boot_interface/src/main.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-void hid_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-
-    hid_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// USB HID
-//--------------------------------------------------------------------+
-
-// Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..)
-// tud_hid_report_complete_cb() is used to send the next report after previous one is complete
-void hid_task(void)
-{
-  // Poll every 10ms
-  const uint32_t interval_ms = 10;
-  static uint32_t start_ms = 0;
-
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
-  start_ms += interval_ms;
-
-  uint32_t const btn = board_button_read();
-
-  if ( tud_suspended() && btn )
-  {
-    // Wake up host if we are in suspend mode
-    // and REMOTE_WAKEUP feature is enabled by host
-    tud_remote_wakeup();
-  }
-  else
-  {
-    // keyboard interface
-    if ( tud_hid_n_ready(ITF_NUM_KEYBOARD) )
-    {
-      // used to avoid send multiple consecutive zero report for keyboard
-      static bool has_keyboard_key = false;
-
-      uint8_t const report_id = 0;
-      uint8_t const modifier  = 0;
-
-      if ( btn )
-      {
-        uint8_t keycode[6] = { 0 };
-        keycode[0] = HID_KEY_ARROW_RIGHT;
-
-        tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, keycode);
-        has_keyboard_key = true;
-      }else
-      {
-        // send empty key report if previously has key pressed
-        if (has_keyboard_key) tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL);
-        has_keyboard_key = false;
-      }
-    }
-
-    // mouse interface
-    if ( tud_hid_n_ready(ITF_NUM_MOUSE) )
-    {
-      if ( btn )
-      {
-        uint8_t const report_id   = 0;
-        uint8_t const button_mask = 0;
-        uint8_t const veritical   = 0;
-        uint8_t const horizontal  = 0;
-        int8_t  const delta       = 5;
-
-        tud_hid_n_mouse_report(ITF_NUM_MOUSE, report_id, button_mask, delta, delta, veritical, horizontal);
-      }
-    }
-  }
-}
-
-// Invoked when received SET_PROTOCOL request
-// protocol is either HID_PROTOCOL_BOOT (0) or HID_PROTOCOL_REPORT (1)
-void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol)
-{
-  (void) instance;
-  (void) protocol;
-
-  // nothing to do since we use the same compatible boot report for both Boot and Report mode.
-  // TOOD set a indicator for user
-}
-
-// Invoked when sent REPORT successfully to host
-// Application can use this to send the next report
-// Note: For composite reports, report[0] is report ID
-void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len)
-{
-  (void) instance;
-  (void) report;
-  (void) len;
-
-  // nothing to do
-}
-
-// Invoked when received GET_REPORT control request
-// Application must fill buffer report's content and return its length.
-// Return zero will cause the stack to STALL request
-uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
-{
-  // TODO not Implemented
-  (void) instance;
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) reqlen;
-
-  return 0;
-}
-
-// Invoked when received SET_REPORT control request or
-// received data on OUT endpoint ( Report ID = 0, Type = 0 )
-void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
-{
-  (void) report_id;
-
-  // keyboard interface
-  if (instance == ITF_NUM_KEYBOARD)
-  {
-    // Set keyboard LED e.g Capslock, Numlock etc...
-    if (report_type == HID_REPORT_TYPE_OUTPUT)
-    {
-      // bufsize should be (at least) 1
-      if ( bufsize < 1 ) return;
-
-      uint8_t const kbd_leds = buffer[0];
-
-      if (kbd_leds & KEYBOARD_LED_CAPSLOCK)
-      {
-        // Capslock On: disable blink, turn led on
-        blink_interval_ms = 0;
-        board_led_write(true);
-      }else
-      {
-        // Caplocks Off: back to normal blink
-        board_led_write(false);
-        blink_interval_ms = BLINK_MOUNTED;
-      }
-    }
-  }
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // blink is disabled
-  if (!blink_interval_ms) return;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h b/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h
deleted file mode 100755
index 59fb9962..00000000
--- a/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_HID               2 // 1 for boot keyboard, 1 for boot mouse
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    8
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c b/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c
deleted file mode 100755
index 3fa48d98..00000000
--- a/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-
-uint8_t const desc_hid_keyboard_report[] =
-{
-  TUD_HID_REPORT_DESC_KEYBOARD()
-};
-
-uint8_t const desc_hid_mouse_report[] =
-{
-  TUD_HID_REPORT_DESC_MOUSE()
-};
-
-// Invoked when received GET HID REPORT DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance)
-{
-  return (instance == 0) ? desc_hid_keyboard_report : desc_hid_mouse_report;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-#define CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + 2*TUD_HID_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ...
-  #define EPNUM_KEYBOARD   0x81
-  #define EPNUM_MOUSE      0x84
-#else
-  #define EPNUM_KEYBOARD   0x81
-  #define EPNUM_MOUSE      0x82
-#endif
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, CFG_TUD_HID_EP_BUFSIZE, 10),
-
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, 10)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h b/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h
deleted file mode 100755
index 57cf0e2c..00000000
--- a/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_DESCRIPTORS_H_
-#define USB_DESCRIPTORS_H_
-
-enum
-{
-  ITF_NUM_KEYBOARD,
-  ITF_NUM_MOUSE,
-  ITF_NUM_TOTAL
-};
-
-#endif
diff --git a/tinyusb/examples/device/hid_composite/CMakeLists.txt b/tinyusb/examples/device/hid_composite/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/hid_composite/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/hid_composite/Makefile b/tinyusb/examples/device/hid_composite/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/hid_composite/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/hid_composite/src/main.c b/tinyusb/examples/device/hid_composite/src/main.c
deleted file mode 100755
index fd25e620..00000000
--- a/tinyusb/examples/device/hid_composite/src/main.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#include "usb_descriptors.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-void hid_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-
-    hid_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// USB HID
-//--------------------------------------------------------------------+
-
-static void send_hid_report(uint8_t report_id, uint32_t btn)
-{
-  // skip if hid is not ready yet
-  if ( !tud_hid_ready() ) return;
-
-  switch(report_id)
-  {
-    case REPORT_ID_KEYBOARD:
-    {
-      // use to avoid send multiple consecutive zero report for keyboard
-      static bool has_keyboard_key = false;
-
-      if ( btn )
-      {
-        uint8_t keycode[6] = { 0 };
-        keycode[0] = HID_KEY_A;
-
-        tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode);
-        has_keyboard_key = true;
-      }else
-      {
-        // send empty key report if previously has key pressed
-        if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL);
-        has_keyboard_key = false;
-      }
-    }
-    break;
-
-    case REPORT_ID_MOUSE:
-    {
-      int8_t const delta = 5;
-
-      // no button, right + down, no scroll, no pan
-      tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0);
-    }
-    break;
-
-    case REPORT_ID_CONSUMER_CONTROL:
-    {
-      // use to avoid send multiple consecutive zero report
-      static bool has_consumer_key = false;
-
-      if ( btn )
-      {
-        // volume down
-        uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT;
-        tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2);
-        has_consumer_key = true;
-      }else
-      {
-        // send empty key report (release key) if previously has key pressed
-        uint16_t empty_key = 0;
-        if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2);
-        has_consumer_key = false;
-      }
-    }
-    break;
-
-    case REPORT_ID_GAMEPAD:
-    {
-      // use to avoid send multiple consecutive zero report for keyboard
-      static bool has_gamepad_key = false;
-
-      hid_gamepad_report_t report =
-      {
-        .x   = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0,
-        .hat = 0, .buttons = 0
-      };
-
-      if ( btn )
-      {
-        report.hat = GAMEPAD_HAT_UP;
-        report.buttons = GAMEPAD_BUTTON_A;
-        tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
-
-        has_gamepad_key = true;
-      }else
-      {
-        report.hat = GAMEPAD_HAT_CENTERED;
-        report.buttons = 0;
-        if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
-        has_gamepad_key = false;
-      }
-    }
-    break;
-
-    default: break;
-  }
-}
-
-// Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..)
-// tud_hid_report_complete_cb() is used to send the next report after previous one is complete
-void hid_task(void)
-{
-  // Poll every 10ms
-  const uint32_t interval_ms = 10;
-  static uint32_t start_ms = 0;
-
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
-  start_ms += interval_ms;
-
-  uint32_t const btn = board_button_read();
-
-  // Remote wakeup
-  if ( tud_suspended() && btn )
-  {
-    // Wake up host if we are in suspend mode
-    // and REMOTE_WAKEUP feature is enabled by host
-    tud_remote_wakeup();
-  }else
-  {
-    // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb()
-    send_hid_report(REPORT_ID_KEYBOARD, btn);
-  }
-}
-
-// Invoked when sent REPORT successfully to host
-// Application can use this to send the next report
-// Note: For composite reports, report[0] is report ID
-void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len)
-{
-  (void) instance;
-  (void) len;
-
-  uint8_t next_report_id = report[0] + 1;
-
-  if (next_report_id < REPORT_ID_COUNT)
-  {
-    send_hid_report(next_report_id, board_button_read());
-  }
-}
-
-// Invoked when received GET_REPORT control request
-// Application must fill buffer report's content and return its length.
-// Return zero will cause the stack to STALL request
-uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
-{
-  // TODO not Implemented
-  (void) instance;
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) reqlen;
-
-  return 0;
-}
-
-// Invoked when received SET_REPORT control request or
-// received data on OUT endpoint ( Report ID = 0, Type = 0 )
-void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
-{
-  (void) instance;
-
-  if (report_type == HID_REPORT_TYPE_OUTPUT)
-  {
-    // Set keyboard LED e.g Capslock, Numlock etc...
-    if (report_id == REPORT_ID_KEYBOARD)
-    {
-      // bufsize should be (at least) 1
-      if ( bufsize < 1 ) return;
-
-      uint8_t const kbd_leds = buffer[0];
-
-      if (kbd_leds & KEYBOARD_LED_CAPSLOCK)
-      {
-        // Capslock On: disable blink, turn led on
-        blink_interval_ms = 0;
-        board_led_write(true);
-      }else
-      {
-        // Caplocks Off: back to normal blink
-        board_led_write(false);
-        blink_interval_ms = BLINK_MOUNTED;
-      }
-    }
-  }
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // blink is disabled
-  if (!blink_interval_ms) return;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/hid_composite/src/tusb_config.h b/tinyusb/examples/device/hid_composite/src/tusb_config.h
deleted file mode 100755
index 868424e6..00000000
--- a/tinyusb/examples/device/hid_composite/src/tusb_config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_HID               1
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    16
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/hid_composite/src/usb_descriptors.c b/tinyusb/examples/device/hid_composite/src/usb_descriptors.c
deleted file mode 100755
index b9a6e729..00000000
--- a/tinyusb/examples/device/hid_composite/src/usb_descriptors.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-
-uint8_t const desc_hid_report[] =
-{
-  TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD         )),
-  TUD_HID_REPORT_DESC_MOUSE   ( HID_REPORT_ID(REPORT_ID_MOUSE            )),
-  TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )),
-  TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD          ))
-};
-
-// Invoked when received GET HID REPORT DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance)
-{
-  (void) instance;
-  return desc_hid_report;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_HID,
-  ITF_NUM_TOTAL
-};
-
-#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN)
-
-#define EPNUM_HID   0x81
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/hid_composite/src/usb_descriptors.h b/tinyusb/examples/device/hid_composite/src/usb_descriptors.h
deleted file mode 100755
index ca8925ad..00000000
--- a/tinyusb/examples/device/hid_composite/src/usb_descriptors.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_DESCRIPTORS_H_
-#define USB_DESCRIPTORS_H_
-
-enum
-{
-  REPORT_ID_KEYBOARD = 1,
-  REPORT_ID_MOUSE,
-  REPORT_ID_CONSUMER_CONTROL,
-  REPORT_ID_GAMEPAD,
-  REPORT_ID_COUNT
-};
-
-#endif /* USB_DESCRIPTORS_H_ */
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_CXD56 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_CXD56
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_CXD56
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_EFM32GG12 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_EFM32GG12
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_EFM32GG12
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_RP2040 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_RP2040
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_RP2040
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI b/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI
+++ /dev/null
diff --git a/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt b/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt
deleted file mode 100755
index ed734b95..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-# use BOARD-Directory name for project id
-get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
-set(PROJECT ${BOARD}-${PROJECT})
-
-# TOP is absolute path to root directory of TinyUSB git repo
-set(TOP "../../..")
-get_filename_component(TOP "${TOP}" REALPATH)
-
-# Check for -DFAMILY=
-if(FAMILY MATCHES "^esp32s[2-3]")
-  include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
-  project(${PROJECT})
-else()
-  message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
-endif()
diff --git a/tinyusb/examples/device/hid_composite_freertos/Makefile b/tinyusb/examples/device/hid_composite_freertos/Makefile
deleted file mode 100755
index 1c195959..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-DEPS_SUBMODULES += lib/FreeRTOS-Kernel
-
-include ../../../tools/top.mk
-include ../../make.mk
-
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-
-INC += \
-	src \
-	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)	
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c))
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS += -Wl,--undefined=vTaskSwitchContext
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults b/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults
deleted file mode 100755
index 83871619..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_IDF_CMAKE=y
-CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt b/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt
deleted file mode 100755
index 6d4a3c1e..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-idf_component_register(SRCS "main.c" "usb_descriptors.c"
-                    INCLUDE_DIRS "."
-                    REQUIRES freertos soc)
-
-file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
-
-if(EXISTS ${board_cmake})
-    include(${board_cmake})
-endif()
-
-idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH)
-target_include_directories(${COMPONENT_TARGET} PUBLIC
-  "${FREERTOS_ORIG_INCLUDE_PATH}"
-  "${TOP}/hw"
-  "${TOP}/src"
-)
-
-target_sources(${COMPONENT_TARGET} PUBLIC
-  "${TOP}/src/tusb.c"
-  "${TOP}/src/common/tusb_fifo.c"
-  "${TOP}/src/device/usbd.c"
-  "${TOP}/src/device/usbd_control.c"
-  "${TOP}/src/class/cdc/cdc_device.c"
-  "${TOP}/src/class/dfu/dfu_rt_device.c"
-  "${TOP}/src/class/hid/hid_device.c"
-  "${TOP}/src/class/midi/midi_device.c"
-  "${TOP}/src/class/msc/msc_device.c"
-  "${TOP}/src/class/net/net_device.c"
-  "${TOP}/src/class/usbtmc/usbtmc_device.c"
-  "${TOP}/src/class/vendor/vendor_device.c"
-  "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c"
-)
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig.h b/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig.h
deleted file mode 100755
index 568b27a1..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-extern uint32_t SystemCoreClock;
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( 0*1024 ) // dynamic is not used
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               2
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-/* Define to trap errors during development. */
-// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
-#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
-  #define configASSERT(_exp) \
-    do {\
-      if ( !(_exp) ) { \
-        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
-        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
-          taskDISABLE_INTERRUPTS(); \
-           __asm("BKPT #0\n"); \
-        }\
-      }\
-    } while(0)
-#else
-  #define configASSERT( x )
-#endif
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					INT_Excep_ICU_SWINT
-#define vTickISR								INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				(configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c b/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c
deleted file mode 100755
index ab885947..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-//--------------------------------------------------------------------+
-// INCLUDE
-//--------------------------------------------------------------------+
-#include "FreeRTOS.h"
-#include "task.h"
-#include "common/tusb_common.h"
-
-
-void vApplicationMallocFailedHook(void)
-{
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
-{
-  (void) pxTask;
-  (void) pcTaskName;
-
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
- * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
- * used by the Idle task. */
-void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
-{
-  /* If the buffers to be provided to the Idle task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xIdleTaskTCB;
-  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
-    state will be stored. */
-  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
-
-  /* Pass out the array that will be used as the Idle task's stack. */
-  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
-  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
-}
-
-/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
- * application must provide an implementation of vApplicationGetTimerTaskMemory()
- * to provide the memory that is used by the Timer service task. */
-void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
-{
-  /* If the buffers to be provided to the Timer task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xTimerTaskTCB;
-  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Timer
-    task's state will be stored. */
-  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
-
-  /* Pass out the array that will be used as the Timer task's stack. */
-  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
-  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
-#include "iodefine.h"
-void vApplicationSetupTimerInterrupt(void)
-{
-  /* Enable CMT0 */
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
-  MSTP(CMT0)       = 0;
-  SYSTEM.PRCR.WORD = (0xA5u<<8);
-
-  CMT0.CMCNT      = 0;
-  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
-  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
-  IR(CMT0, CMI0)  = 0;
-  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
-  IEN(CMT0, CMI0) = 1;
-  CMT.CMSTR0.BIT.STR0 = 1;
-}
-#endif
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/main.c b/tinyusb/examples/device/hid_composite_freertos/src/main.c
deleted file mode 100755
index 9c9830e3..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/main.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "FreeRTOS.h"
-#include "task.h"
-#include "timers.h"
-#include "queue.h"
-#include "semphr.h"
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#include "usb_descriptors.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-// static timer
-StaticTimer_t blinky_tmdef;
-TimerHandle_t blinky_tm;
-
-// static task for usbd
-#if CFG_TUSB_DEBUG
-  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE)
-#else
-  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE/2)
-#endif
-
-StackType_t  usb_device_stack[USBD_STACK_SIZE];
-StaticTask_t usb_device_taskdef;
-
-// static task for hid
-#define HID_STACK_SZIE      configMINIMAL_STACK_SIZE
-StackType_t  hid_stack[HID_STACK_SZIE];
-StaticTask_t hid_taskdef;
-
-
-void led_blinky_cb(TimerHandle_t xTimer);
-void usb_device_task(void* param);
-void hid_task(void* params);
-
-//--------------------------------------------------------------------+
-// Main
-//--------------------------------------------------------------------+
-
-int main(void)
-{
-  board_init();
-
-  // soft timer for blinky
-  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
-  xTimerStart(blinky_tm, 0);
-
-  // Create a task for tinyusb device stack
-  (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef);
-
-  // Create HID task
-  (void) xTaskCreateStatic( hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, hid_stack, &hid_taskdef);
-
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if CFG_TUSB_MCU != OPT_MCU_ESP32S2 && CFG_TUSB_MCU != OPT_MCU_ESP32S3
-  vTaskStartScheduler();
-#endif
-
-  return 0;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
-void app_main(void)
-{
-  main();
-}
-#endif
-
-// USB Device Driver task
-// This top level thread process all usb events and invoke callbacks
-void usb_device_task(void* param)
-{
-  (void) param;
-
-  // This should be called after scheduler/kernel is started.
-  // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tusb_init();
-
-  // RTOS forever loop
-  while (1)
-  {
-    // tinyusb device task
-    tud_task();
-  }
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0);
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0);
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
-}
-
-//--------------------------------------------------------------------+
-// USB HID
-//--------------------------------------------------------------------+
-
-static void send_hid_report(uint8_t report_id, uint32_t btn)
-{
-  // skip if hid is not ready yet
-  if ( !tud_hid_ready() ) return;
-
-  switch(report_id)
-  {
-    case REPORT_ID_KEYBOARD:
-    {
-      // use to avoid send multiple consecutive zero report for keyboard
-      static bool has_keyboard_key = false;
-
-      if ( btn )
-      {
-        uint8_t keycode[6] = { 0 };
-        keycode[0] = HID_KEY_A;
-
-        tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode);
-        has_keyboard_key = true;
-      }else
-      {
-        // send empty key report if previously has key pressed
-        if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL);
-        has_keyboard_key = false;
-      }
-    }
-    break;
-
-    case REPORT_ID_MOUSE:
-    {
-      int8_t const delta = 5;
-
-      // no button, right + down, no scroll, no pan
-      tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0);
-    }
-    break;
-
-    case REPORT_ID_CONSUMER_CONTROL:
-    {
-      // use to avoid send multiple consecutive zero report
-      static bool has_consumer_key = false;
-
-      if ( btn )
-      {
-        // volume down
-        uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT;
-        tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2);
-        has_consumer_key = true;
-      }else
-      {
-        // send empty key report (release key) if previously has key pressed
-        uint16_t empty_key = 0;
-        if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2);
-        has_consumer_key = false;
-      }
-    }
-    break;
-
-    case REPORT_ID_GAMEPAD:
-    {
-      // use to avoid send multiple consecutive zero report for keyboard
-      static bool has_gamepad_key = false;
-
-      hid_gamepad_report_t report =
-      {
-        .x   = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0,
-        .hat = 0, .buttons = 0
-      };
-
-      if ( btn )
-      {
-        report.hat = GAMEPAD_HAT_UP;
-        report.buttons = GAMEPAD_BUTTON_A;
-        tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
-
-        has_gamepad_key = true;
-      }else
-      {
-        report.hat = GAMEPAD_HAT_CENTERED;
-        report.buttons = 0;
-        if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
-        has_gamepad_key = false;
-      }
-    }
-    break;
-
-    default: break;
-  }
-}
-
-void hid_task(void* param)
-{
-  (void) param;
-
-  while(1)
-  {
-    // Poll every 10ms
-    vTaskDelay(pdMS_TO_TICKS(10));
-
-    uint32_t const btn = board_button_read();
-
-    // Remote wakeup
-    if ( tud_suspended() && btn )
-    {
-      // Wake up host if we are in suspend mode
-      // and REMOTE_WAKEUP feature is enabled by host
-      tud_remote_wakeup();
-    }
-    else
-    {
-      // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb()
-      send_hid_report(REPORT_ID_KEYBOARD, btn);
-    }
-  }
-}
-
-// Invoked when sent REPORT successfully to host
-// Application can use this to send the next report
-// Note: For composite reports, report[0] is report ID
-void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len)
-{
-  (void) instance;
-  (void) len;
-
-  uint8_t next_report_id = report[0] + 1;
-
-  if (next_report_id < REPORT_ID_COUNT)
-  {
-    send_hid_report(next_report_id, board_button_read());
-  }
-}
-
-
-// Invoked when received GET_REPORT control request
-// Application must fill buffer report's content and return its length.
-// Return zero will cause the stack to STALL request
-uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
-{
-  // TODO not Implemented
-  (void) instance;
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) reqlen;
-
-  return 0;
-}
-
-// Invoked when received SET_REPORT control request or
-// received data on OUT endpoint ( Report ID = 0, Type = 0 )
-void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
-{
-  (void) instance;
-
-  if (report_type == HID_REPORT_TYPE_OUTPUT)
-  {
-    // Set keyboard LED e.g Capslock, Numlock etc...
-    if (report_id == REPORT_ID_KEYBOARD)
-    {
-      // bufsize should be (at least) 1
-      if ( bufsize < 1 ) return;
-
-      uint8_t const kbd_leds = buffer[0];
-
-      if (kbd_leds & KEYBOARD_LED_CAPSLOCK)
-      {
-        // Capslock On: disable blink, turn led on
-        xTimerStop(blinky_tm, portMAX_DELAY);
-        board_led_write(true);
-      }else
-      {
-        // Caplocks Off: back to normal blink
-        board_led_write(false);
-        xTimerStart(blinky_tm, portMAX_DELAY);
-      }
-    }
-  }
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinky_cb(TimerHandle_t xTimer)
-{
-  (void) xTimer;
-  static bool led_state = false;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h b/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h
deleted file mode 100755
index 4b0458ef..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-// This examples use FreeRTOS
-#define CFG_TUSB_OS               OPT_OS_FREERTOS
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_HID               1
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    16
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c b/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c
deleted file mode 100755
index b9a6e729..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-
-uint8_t const desc_hid_report[] =
-{
-  TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD         )),
-  TUD_HID_REPORT_DESC_MOUSE   ( HID_REPORT_ID(REPORT_ID_MOUSE            )),
-  TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )),
-  TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD          ))
-};
-
-// Invoked when received GET HID REPORT DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance)
-{
-  (void) instance;
-  return desc_hid_report;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_HID,
-  ITF_NUM_TOTAL
-};
-
-#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN)
-
-#define EPNUM_HID   0x81
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h b/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h
deleted file mode 100755
index ca8925ad..00000000
--- a/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_DESCRIPTORS_H_
-#define USB_DESCRIPTORS_H_
-
-enum
-{
-  REPORT_ID_KEYBOARD = 1,
-  REPORT_ID_MOUSE,
-  REPORT_ID_CONSUMER_CONTROL,
-  REPORT_ID_GAMEPAD,
-  REPORT_ID_COUNT
-};
-
-#endif /* USB_DESCRIPTORS_H_ */
diff --git a/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt b/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/hid_generic_inout/Makefile b/tinyusb/examples/device/hid_generic_inout/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/hid_generic_inout/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/hid_generic_inout/boards.js b/tinyusb/examples/device/hid_generic_inout/boards.js
deleted file mode 100755
index 6b78231a..00000000
--- a/tinyusb/examples/device/hid_generic_inout/boards.js
+++ /dev/null
@@ -1,4 +0,0 @@
-module.exports = {
-	"Adafruit Boards":[0x239A,0xFFFF],
-	"TinyUSB example":[0xCAFE,0xFFFF]
-}
diff --git a/tinyusb/examples/device/hid_generic_inout/hid_test.js b/tinyusb/examples/device/hid_generic_inout/hid_test.js
deleted file mode 100755
index daa958fd..00000000
--- a/tinyusb/examples/device/hid_generic_inout/hid_test.js
+++ /dev/null
@@ -1,68 +0,0 @@
-// IMPORTANT: install the dependency via 'npm i node-hid' in the same location as the script
-// If the install fails on windows you may need to run 'npm i -g windows-build-tools' first to be able to compile native code needed for this library
-
-var HID = require('node-hid');
-var os = require('os')
-// list of supported devices
-var boards = require('./boards.js')
-var devices = HID.devices();
-
-// this will choose any device found in the boards.js file
-var deviceInfo = devices.find(anySupportedBoard);
-var reportLen = 64;
-
-var message = "Hello World!"
-
-// Turn our string into an array of integers e.g. 'ascii codes', though charCodeAt spits out UTF-16
-// This means if you have characters in your string that are not Latin-1 you will have to add additional logic for character codes above 255
-var messageBuffer = Array.from(message, function(c){return c.charCodeAt(0)});
-
-// HIDAPI requires us to prepend a 0 for single hid report as dummy reportID
-messageBuffer.unshift(0)
-
-// Some OSes expect that you always send a buffer that equals your report length
-// So lets fill up the rest of the buffer with zeros
-var paddingBuf = Array(reportLen-messageBuffer.length);
-paddingBuf.fill(0)
-messageBuffer = messageBuffer.concat(paddingBuf)
-
-// check if we actually found a device and if so send our messageBuffer to it
-if( deviceInfo ) {
-	console.log(deviceInfo)
-	var device = new HID.HID( deviceInfo.path );
-
-	// register an event listener for data coming from the device
-	device.on("data", function(data) {
-		// Print what we get from the device
-		console.log(data.toString('ascii'));
-	});
-
-	// the same for any error that occur
-	device.on("error", function(err) {console.log(err)});
-
-	// send our message to the device every 500ms
-	setInterval(function () {
-		device.write(messageBuffer);
-	},500)
-}
-
-
-function anySupportedBoard(d) {
-	
-	for (var key in boards) {
-	    if (boards.hasOwnProperty(key)) {
-	        if (isDevice(boards[key],d)) {
-	        	console.log("Found " + d.product);
-	        	return true;
-	        }
-	    }
-	}
-	return false;
-}
-
-
-function isDevice(board,d){
-	// product id 0xff is matches all
-	return d.vendorId==board[0] && (d.productId==board[1] || board[1] == 0xFFFF);
-}
-
diff --git a/tinyusb/examples/device/hid_generic_inout/hid_test.py b/tinyusb/examples/device/hid_generic_inout/hid_test.py
deleted file mode 100755
index a42930fb..00000000
--- a/tinyusb/examples/device/hid_generic_inout/hid_test.py
+++ /dev/null
@@ -1,20 +0,0 @@
-# Install python3 HID package https://pypi.org/project/hid/
-import hid
-
-USB_VID = 0xcafe
-
-print("Openning HID device with VID = 0x%X" % USB_VID)
-
-for dict in hid.enumerate(USB_VID):
-    print(dict)
-    dev = hid.Device(dict['vendor_id'], dict['product_id'])
-    if dev:
-        while True:
-            # Get input from console and encode to UTF8 for array of chars.
-            # hid generic inout is single report therefore by HIDAPI requirement
-            # it must be preceeded with 0x00 as dummy reportID
-            str_out = b'\x00'
-            str_out += input("Send text to HID Device : ").encode('utf-8')
-            dev.write(str_out)
-            str_in = dev.read(64)
-            print("Received from HID Device:", str_in, '\n')
diff --git a/tinyusb/examples/device/hid_generic_inout/src/main.c b/tinyusb/examples/device/hid_generic_inout/src/main.c
deleted file mode 100755
index 32185560..00000000
--- a/tinyusb/examples/device/hid_generic_inout/src/main.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-/* This example demonstrate HID Generic raw Input & Output.
- * It will receive data from Host (In endpoint) and echo back (Out endpoint).
- * HID Report descriptor use vendor for usage page (using template TUD_HID_REPORT_DESC_GENERIC_INOUT)
- *
- * There are 2 ways to test the sketch
- * 1. Using nodejs
- * - Install nodejs and npm to your PC
- *
- * - Install excellent node-hid (https://github.com/node-hid/node-hid) by
- *   $ npm install node-hid
- *
- * - Run provided hid test script
- *   $ node hid_test.js
- *
- * 2. Using python
- * - Install `hid` package (https://pypi.org/project/hid/) by
- *   $ pip install hid
- *
- * - hid package replies on hidapi (https://github.com/libusb/hidapi) for backend,
- *   which already available in Linux. However on windows, you may need to download its dlls from their release page and
- *   copy it over to folder where python is installed.
- *
- * - Run provided hid test script to send and receive data to this device.
- *   $ python3 hid_test.py
- */
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// USB HID
-//--------------------------------------------------------------------+
-
-// Invoked when received GET_REPORT control request
-// Application must fill buffer report's content and return its length.
-// Return zero will cause the stack to STALL request
-uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
-{
-  // TODO not Implemented
-  (void) itf;
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) reqlen;
-
-  return 0;
-}
-
-// Invoked when received SET_REPORT control request or
-// received data on OUT endpoint ( Report ID = 0, Type = 0 )
-void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
-{
-  // This example doesn't use multiple report and report ID
-  (void) itf;
-  (void) report_id;
-  (void) report_type;
-
-  // echo back anything we received from host
-  tud_hid_report(0, buffer, bufsize);
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h b/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h
deleted file mode 100755
index 1b8b91c4..00000000
--- a/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               1
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    64
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c b/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c
deleted file mode 100755
index 5a2f5ffd..00000000
--- a/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-
-uint8_t const desc_hid_report[] =
-{
-  TUD_HID_REPORT_DESC_GENERIC_INOUT(CFG_TUD_HID_EP_BUFSIZE)
-};
-
-// Invoked when received GET HID REPORT DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf)
-{
-  (void) itf;
-  return desc_hid_report;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_HID,
-  ITF_NUM_TOTAL
-};
-
-#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_INOUT_DESC_LEN)
-
-#define EPNUM_HID   0x01
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval
-  TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, 0x80 | EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt b/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/hid_multiple_interface/Makefile b/tinyusb/examples/device/hid_multiple_interface/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/hid_multiple_interface/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/hid_multiple_interface/src/main.c b/tinyusb/examples/device/hid_multiple_interface/src/main.c
deleted file mode 100755
index 7cb1d75a..00000000
--- a/tinyusb/examples/device/hid_multiple_interface/src/main.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-// Interface index depends on the order in configuration descriptor
-enum {
-  ITF_KEYBOARD = 0,
-  ITF_MOUSE = 1
-};
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-void hid_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-
-    hid_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// USB HID
-//--------------------------------------------------------------------+
-
-void hid_task(void)
-{
-  // Poll every 10ms
-  const uint32_t interval_ms = 10;
-  static uint32_t start_ms = 0;
-
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
-  start_ms += interval_ms;
-
-  uint32_t const btn = board_button_read();
-
-  // Remote wakeup
-  if ( tud_suspended() && btn )
-  {
-    // Wake up host if we are in suspend mode
-    // and REMOTE_WAKEUP feature is enabled by host
-    tud_remote_wakeup();
-  }
-
-  /*------------- Keyboard -------------*/
-  if ( tud_hid_n_ready(ITF_KEYBOARD) )
-  {
-    // use to avoid send multiple consecutive zero report for keyboard
-    static bool has_key = false;
-
-    if ( btn )
-    {
-      uint8_t keycode[6] = { 0 };
-      keycode[0] = HID_KEY_A;
-
-      tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, keycode);
-
-      has_key = true;
-    }else
-    {
-      // send empty key report if previously has key pressed
-      if (has_key) tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, NULL);
-      has_key = false;
-    }
-  }
-
-  /*------------- Mouse -------------*/
-  if ( tud_hid_n_ready(ITF_MOUSE) )
-  {
-    if ( btn )
-    {
-      int8_t const delta = 5;
-
-      // no button, right + down, no scroll pan
-      tud_hid_n_mouse_report(ITF_MOUSE, 0, 0x00, delta, delta, 0, 0);
-    }
-  }
-}
-
-
-// Invoked when received GET_REPORT control request
-// Application must fill buffer report's content and return its length.
-// Return zero will cause the stack to STALL request
-uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
-{
-  // TODO not Implemented
-  (void) itf;
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) reqlen;
-
-  return 0;
-}
-
-// Invoked when received SET_REPORT control request or
-// received data on OUT endpoint ( Report ID = 0, Type = 0 )
-void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
-{
-  // TODO set LED based on CAPLOCK, NUMLOCK etc...
-  (void) itf;
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) bufsize;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h b/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h
deleted file mode 100755
index a0aa17a9..00000000
--- a/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_HID               2
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    8
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c b/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c
deleted file mode 100755
index 9eef2150..00000000
--- a/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-
-uint8_t const desc_hid_report1[] =
-{
-  TUD_HID_REPORT_DESC_KEYBOARD()
-};
-
-uint8_t const desc_hid_report2[] =
-{
-  TUD_HID_REPORT_DESC_MOUSE()
-};
-
-// Invoked when received GET HID REPORT DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf)
-{
-  if (itf == 0)
-  {
-    return desc_hid_report1;
-  }
-  else if (itf == 1)
-  {
-    return desc_hid_report2;
-  }
-
-  return NULL;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_HID1,
-  ITF_NUM_HID2,
-  ITF_NUM_TOTAL
-};
-
-#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN + TUD_HID_DESC_LEN)
-
-#define EPNUM_HID1   0x81
-#define EPNUM_HID2   0x82
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID1, 4, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report1), EPNUM_HID1, CFG_TUD_HID_EP_BUFSIZE, 10),
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID2, 5, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report2), EPNUM_HID2, CFG_TUD_HID_EP_BUFSIZE, 10)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 },  // 0: is supported language is English (0x0409)
-  "TinyUSB",                      // 1: Manufacturer
-  "TinyUSB Device",               // 2: Product
-  "123456",                       // 3: Serials, should use chip ID
-  "Keyboard Interface",           // 4: Interface 1 String
-  "Mouse Interface",              // 5: Interface 2 String
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/midi_test/CMakeLists.txt b/tinyusb/examples/device/midi_test/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/midi_test/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/midi_test/Makefile b/tinyusb/examples/device/midi_test/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/midi_test/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/midi_test/src/main.c b/tinyusb/examples/device/midi_test/src/main.c
deleted file mode 100755
index 19374847..00000000
--- a/tinyusb/examples/device/midi_test/src/main.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-/* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install
- * synth software and midi connection management software. On
- * - Linux (Ubuntu): install qsynth, qjackctl. Then connect TinyUSB output port to FLUID Synth input port
- * - Windows: install MIDI-OX
- * - MacOS: SimpleSynth
- */
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-void midi_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-    midi_task();
-  }
-
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// MIDI Task
-//--------------------------------------------------------------------+
-
-// Variable that holds the current position in the sequence.
-uint32_t note_pos = 0;
-
-// Store example melody as an array of note values
-uint8_t note_sequence[] =
-{
-  74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78,
-  74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61,
-  56,61,64,68,74,78,81,86,90,93,98,102
-};
-
-void midi_task(void)
-{
-  static uint32_t start_ms = 0;
-
-  uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint
-  uint8_t const channel   = 0; // 0 for channel 1
-
-  // The MIDI interface always creates input and output port/jack descriptors
-  // regardless of these being used or not. Therefore incoming traffic should be read
-  // (possibly just discarded) to avoid the sender blocking in IO
-  uint8_t packet[4];
-  while ( tud_midi_available() ) tud_midi_packet_read(packet);
-
-  // send note periodically
-  if (board_millis() - start_ms < 286) return; // not enough time
-  start_ms += 286;
-
-  // Previous positions in the note sequence.
-  int previous = note_pos - 1;
-
-  // If we currently are at position 0, set the
-  // previous position to the last note in the sequence.
-  if (previous < 0) previous = sizeof(note_sequence) - 1;
-
-  // Send Note On for current position at full velocity (127) on channel 1.
-  uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 };
-  tud_midi_stream_write(cable_num, note_on, 3);
-
-  // Send Note Off for previous note.
-  uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0};
-  tud_midi_stream_write(cable_num, note_off, 3);
-
-  // Increment position
-  note_pos++;
-
-  // If we are at the end of the sequence, start over.
-  if (note_pos >= sizeof(note_sequence)) note_pos = 0;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/midi_test/src/tusb_config.h b/tinyusb/examples/device/midi_test/src/tusb_config.h
deleted file mode 100755
index 61b9b655..00000000
--- a/tinyusb/examples/device/midi_test/src/tusb_config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              1
-#define CFG_TUD_VENDOR            0
-
-// MIDI FIFO size of TX and RX
-#define CFG_TUD_MIDI_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_MIDI_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/midi_test/src/usb_descriptors.c b/tinyusb/examples/device/midi_test/src/usb_descriptors.c
deleted file mode 100755
index 9d92a775..00000000
--- a/tinyusb/examples/device/midi_test/src/usb_descriptors.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]       MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_MIDI = 0,
-  ITF_NUM_MIDI_STREAMING,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_MIDI_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  #define EPNUM_MIDI   0x02
-#else
-  #define EPNUM_MIDI   0x01
-#endif
-
-uint8_t const desc_fs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 64)
-};
-
-#if TUD_OPT_HIGH_SPEED
-uint8_t const desc_hs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 512)
-};
-#endif
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-
-#if TUD_OPT_HIGH_SPEED
-  // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX
+++ /dev/null
diff --git a/tinyusb/examples/device/msc_dual_lun/.skip.MCU_SAMD11 b/tinyusb/examples/device/msc_dual_lun/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/msc_dual_lun/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/msc_dual_lun/CMakeLists.txt b/tinyusb/examples/device/msc_dual_lun/CMakeLists.txt
deleted file mode 100755
index 9e834ae2..00000000
--- a/tinyusb/examples/device/msc_dual_lun/CMakeLists.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/msc_dual_lun/Makefile b/tinyusb/examples/device/msc_dual_lun/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/msc_dual_lun/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/msc_dual_lun/src/main.c b/tinyusb/examples/device/msc_dual_lun/src/main.c
deleted file mode 100755
index 0293261a..00000000
--- a/tinyusb/examples/device/msc_dual_lun/src/main.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/msc_dual_lun/src/msc_disk_dual.c b/tinyusb/examples/device/msc_dual_lun/src/msc_disk_dual.c
deleted file mode 100755
index 2ab050da..00000000
--- a/tinyusb/examples/device/msc_dual_lun/src/msc_disk_dual.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#if CFG_TUD_MSC
-
-// Some MCU doesn't have enough 8KB SRAM to store the whole disk
-// We will use Flash as read-only disk with board that has
-// CFG_EXAMPLE_MSC_READONLY defined
-
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
-  DISK_BLOCK_SIZE = 512
-};
-
-
-//--------------------------------------------------------------------+
-// LUN 0
-//--------------------------------------------------------------------+
-#define README0_CONTENTS \
-"LUN0: This is tinyusb's MassStorage Class demo.\r\n\r\n\
-If you find any bugs or get any questions, feel free to file an\r\n\
-issue at github.com/hathach/tinyusb"
-
-
-#ifdef CFG_EXAMPLE_MSC_READONLY
-const
-#endif
-uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
-  //------------- Block0: Boot Sector -------------//
-  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
-  // sector_per_cluster = 1; reserved_sectors = 1;
-  // fat_num            = 1; fat12_root_entry_num = 16;
-  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
-  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
-  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB 0  ";
-  // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , '0' , ' ' , ' ' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
-
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
-
-  //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
-  },
-
-  //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , '0' , ' ' , ' ' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , '0' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README0_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
-  },
-
-  //------------- Block3: Readme Content -------------//
-  README0_CONTENTS
-};
-
-//--------------------------------------------------------------------+
-// LUN 1
-//--------------------------------------------------------------------+
-#define README1_CONTENTS \
-"LUN1: This is tinyusb's MassStorage Class demo.\r\n\r\n\
-If you find any bugs or get any questions, feel free to file an\r\n\
-issue at github.com/hathach/tinyusb"
-
-#ifdef CFG_EXAMPLE_MSC_READONLY
-const
-#endif
-uint8_t msc_disk1[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
-  //------------- Block0: Boot Sector -------------//
-  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
-  // sector_per_cluster = 1; reserved_sectors = 1;
-  // fat_num            = 1; fat12_root_entry_num = 16;
-  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
-  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
-  // filesystem_type    = "FAT12   "; volume_serial_number = 0x5678; volume_label = "TinyUSB 1  ";
-  // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x78, 0x56, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , '1' , ' ' , ' ' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
-
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
-
-  //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
-  },
-
-  //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , '1' , ' ' , ' ' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , '1' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README1_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
-  },
-
-  //------------- Block3: Readme Content -------------//
-  README1_CONTENTS
-};
-
-// Invoked to determine max LUN
-uint8_t tud_msc_get_maxlun_cb(void)
-{
-  return 2; // dual LUN
-}
-
-// Invoked when received SCSI_CMD_INQUIRY
-// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
-  (void) lun; // use same ID for both LUNs
-
-  const char vid[] = "TinyUSB";
-  const char pid[] = "Mass Storage";
-  const char rev[] = "1.0";
-
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
-  memcpy(product_rev, rev, strlen(rev));
-}
-
-// Invoked when received Test Unit Ready command.
-// return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
-  (void) lun;
-
-  return true; // RAM disk is always ready
-}
-
-// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
-// Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
-  (void) lun;
-
-  *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
-}
-
-// Invoked when received Start Stop Unit command
-// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
-// - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
-  (void) lun;
-  (void) power_condition;
-
-  if ( load_eject )
-  {
-    if (start)
-    {
-      // load disk storage
-    }else
-    {
-      // unload disk storage
-    }
-  }
-
-  return true;
-}
-
-// Callback invoked when received READ10 command.
-// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
-  uint8_t const* addr = (lun ? msc_disk1[lba] : msc_disk0[lba]) + offset;
-  memcpy(buffer, addr, bufsize);
-
-  return bufsize;
-}
-
-// Callback invoked when received WRITE10 command.
-// Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = (lun ? msc_disk1[lba] : msc_disk0[lba])  + offset;
-  memcpy(addr, buffer, bufsize);
-#else
-  (void) lun; (void) lba; (void) offset; (void) buffer;
-#endif
-
-  return bufsize;
-}
-
-// Callback invoked when received an SCSI command not in built-in list below
-// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
-// - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
-
-  void const* response = NULL;
-  uint16_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
-    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-      // Host is about to read/write etc ... better not to disconnect disk
-      resplen = 0;
-    break;
-
-    case SCSI_CMD_START_STOP_UNIT:
-      // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power
-      /* scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd;
-        // Start bit = 0 : low power mode, if load_eject = 1 : unmount disk storage as well
-        // Start bit = 1 : Ready mode, if load_eject = 1 : mount disk storage
-        start_stop->start;
-        start_stop->load_eject;
-       */
-       resplen = 0;
-    break;
-
-
-    default:
-      // Set Sense = Invalid Command Operation
-      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
-
-      // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
-  }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, resplen);
-    }else
-    {
-      // SCSI output
-    }
-  }
-
-  return resplen;
-}
-
-#endif
diff --git a/tinyusb/examples/device/msc_dual_lun/src/tusb_config.h b/tinyusb/examples/device/msc_dual_lun/src/tusb_config.h
deleted file mode 100755
index 44da21e5..00000000
--- a/tinyusb/examples/device/msc_dual_lun/src/tusb_config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               1
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-
-// MSC Buffer size of Device Mass storage
-#define CFG_TUD_MSC_EP_BUFSIZE    512
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/msc_dual_lun/src/usb_descriptors.c b/tinyusb/examples/device/msc_dual_lun/src/usb_descriptors.c
deleted file mode 100755
index 138de62a..00000000
--- a/tinyusb/examples/device/msc_dual_lun/src/usb_descriptors.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-enum
-{
-  ITF_NUM_MSC,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  //  0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
-  #define EPNUM_MSC_OUT   0x02
-  #define EPNUM_MSC_IN    0x82
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG
-  // SAMG doesn't support a same endpoint number with different direction IN and OUT
-  //  e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_MSC_OUT   0x01
-  #define EPNUM_MSC_IN    0x82
-
-#else
-  #define EPNUM_MSC_OUT   0x01
-  #define EPNUM_MSC_IN    0x81
-
-#endif
-
-uint8_t const desc_fs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
-};
-
-#if TUD_OPT_HIGH_SPEED
-uint8_t const desc_hs_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
-};
-#endif
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-
-#if TUD_OPT_HIGH_SPEED
-  // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX
+++ /dev/null
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX
+++ /dev/null
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX
+++ /dev/null
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx
deleted file mode 100755
index 17600f06..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx
+++ /dev/null
@@ -1 +0,0 @@
-too many warnings for 16-bit integer overflow
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_NUC121 b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_NUC121
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_NUC121
+++ /dev/null
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 b/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_STM32L0
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/.skip.MCU_STM32L0
+++ /dev/null
diff --git a/tinyusb/examples/device/net_lwip_webserver/CMakeLists.txt b/tinyusb/examples/device/net_lwip_webserver/CMakeLists.txt
deleted file mode 100755
index 7500f6e9..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/CMakeLists.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-set(TOP "../../..")
-get_filename_component(TOP "${TOP}" REALPATH)
-
-if (EXISTS ${TOP}/lib/lwip/src)
-    include(${TOP}/hw/bsp/family_support.cmake)
-
-    # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-    family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-    project(${PROJECT})
-
-    # Checks this example is valid for the family and initializes the project
-    family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-    add_executable(${PROJECT})
-
-    # Example source
-    target_sources(${PROJECT} PUBLIC
-            ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-            ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-            )
-
-    # Example include
-    target_include_directories(${PROJECT} PUBLIC
-            ${CMAKE_CURRENT_SOURCE_DIR}/src
-            ${TOP}/lib/lwip/src/include
-            ${TOP}/lib/lwip/src/include/ipv4
-            ${TOP}/lib/lwip/src/include/lwip/apps
-            ${TOP}/lib/networking
-            )
-
-    target_sources(${PROJECT} PUBLIC
-            ${TOP}/lib/lwip/src/core/altcp.c
-            ${TOP}/lib/lwip/src/core/altcp_alloc.c
-            ${TOP}/lib/lwip/src/core/altcp_tcp.c
-            ${TOP}/lib/lwip/src/core/def.c
-            ${TOP}/lib/lwip/src/core/dns.c
-            ${TOP}/lib/lwip/src/core/inet_chksum.c
-            ${TOP}/lib/lwip/src/core/init.c
-            ${TOP}/lib/lwip/src/core/ip.c
-            ${TOP}/lib/lwip/src/core/mem.c
-            ${TOP}/lib/lwip/src/core/memp.c
-            ${TOP}/lib/lwip/src/core/netif.c
-            ${TOP}/lib/lwip/src/core/pbuf.c
-            ${TOP}/lib/lwip/src/core/raw.c
-            ${TOP}/lib/lwip/src/core/stats.c
-            ${TOP}/lib/lwip/src/core/sys.c
-            ${TOP}/lib/lwip/src/core/tcp.c
-            ${TOP}/lib/lwip/src/core/tcp_in.c
-            ${TOP}/lib/lwip/src/core/tcp_out.c
-            ${TOP}/lib/lwip/src/core/timeouts.c
-            ${TOP}/lib/lwip/src/core/udp.c
-            ${TOP}/lib/lwip/src/core/ipv4/autoip.c
-            ${TOP}/lib/lwip/src/core/ipv4/dhcp.c
-            ${TOP}/lib/lwip/src/core/ipv4/etharp.c
-            ${TOP}/lib/lwip/src/core/ipv4/icmp.c
-            ${TOP}/lib/lwip/src/core/ipv4/igmp.c
-            ${TOP}/lib/lwip/src/core/ipv4/ip4.c
-            ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c
-            ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c
-            ${TOP}/lib/lwip/src/netif/ethernet.c
-            ${TOP}/lib/lwip/src/netif/slipif.c
-            ${TOP}/lib/lwip/src/apps/http/httpd.c
-            ${TOP}/lib/lwip/src/apps/http/fs.c
-            ${TOP}/lib/networking/dhserver.c
-            ${TOP}/lib/networking/dnserver.c
-            ${TOP}/lib/networking/rndis_reports.c
-            )
-
-    target_compile_definitions(${PROJECT} PUBLIC
-            PBUF_POOL_SIZE=2
-            TCP_WND=2*TCP_MSS
-            HTTPD_USE_CUSTOM_FSDATA=0
-            )
-
-    # Configure compilation flags and libraries for the example... see the corresponding function
-    # in hw/bsp/FAMILY/family.cmake for details.
-    family_configure_device_example(${PROJECT})
-endif()
\ No newline at end of file
diff --git a/tinyusb/examples/device/net_lwip_webserver/Makefile b/tinyusb/examples/device/net_lwip_webserver/Makefile
deleted file mode 100755
index c3e0d889..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/Makefile
+++ /dev/null
@@ -1,61 +0,0 @@
-DEPS_SUBMODULES += lib/lwip
-
-include ../../../tools/top.mk
-include ../../make.mk
-
-CFLAGS += \
-  -DPBUF_POOL_SIZE=2 \
-  -DTCP_WND=2*TCP_MSS \
-  -DHTTPD_USE_CUSTOM_FSDATA=0
-
-INC += \
-  src \
-  $(TOP)/hw \
-  $(TOP)/lib/lwip/src/include \
-  $(TOP)/lib/lwip/src/include/ipv4 \
-  $(TOP)/lib/lwip/src/include/lwip/apps \
-  $(TOP)/lib/networking
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-# lwip sources
-SRC_C += \
-  lib/lwip/src/core/altcp.c \
-  lib/lwip/src/core/altcp_alloc.c \
-  lib/lwip/src/core/altcp_tcp.c \
-  lib/lwip/src/core/def.c \
-  lib/lwip/src/core/dns.c \
-  lib/lwip/src/core/inet_chksum.c \
-  lib/lwip/src/core/init.c \
-  lib/lwip/src/core/ip.c \
-  lib/lwip/src/core/mem.c \
-  lib/lwip/src/core/memp.c \
-  lib/lwip/src/core/netif.c \
-  lib/lwip/src/core/pbuf.c \
-  lib/lwip/src/core/raw.c \
-  lib/lwip/src/core/stats.c \
-  lib/lwip/src/core/sys.c \
-  lib/lwip/src/core/tcp.c \
-  lib/lwip/src/core/tcp_in.c \
-  lib/lwip/src/core/tcp_out.c \
-  lib/lwip/src/core/timeouts.c \
-  lib/lwip/src/core/udp.c \
-  lib/lwip/src/core/ipv4/autoip.c \
-  lib/lwip/src/core/ipv4/dhcp.c \
-  lib/lwip/src/core/ipv4/etharp.c \
-  lib/lwip/src/core/ipv4/icmp.c \
-  lib/lwip/src/core/ipv4/igmp.c \
-  lib/lwip/src/core/ipv4/ip4.c \
-  lib/lwip/src/core/ipv4/ip4_addr.c \
-  lib/lwip/src/core/ipv4/ip4_frag.c \
-  lib/lwip/src/netif/ethernet.c \
-  lib/lwip/src/netif/slipif.c \
-  lib/lwip/src/apps/http/httpd.c \
-  lib/lwip/src/apps/http/fs.c \
-  lib/networking/dhserver.c \
-  lib/networking/dnserver.c \
-  lib/networking/rndis_reports.c
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/net_lwip_webserver/src/arch/cc.h b/tinyusb/examples/device/net_lwip_webserver/src/arch/cc.h
deleted file mode 100755
index 56a0cacf..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/src/arch/cc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
- * All rights reserved. 
- * 
- * Redistribution and use in source and binary forms, with or without modification, 
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- * 
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-#ifndef __CC_H__
-#define __CC_H__
-
-//#include "cpu.h"
-
-typedef int sys_prot_t;
-
-
-
-/* define compiler specific symbols */
-#if defined (__ICCARM__)
-
-#define PACK_STRUCT_BEGIN
-#define PACK_STRUCT_STRUCT 
-#define PACK_STRUCT_END
-#define PACK_STRUCT_FIELD(x) x
-#define PACK_STRUCT_USE_INCLUDES
-
-#elif defined (__CC_ARM)
-
-#define PACK_STRUCT_BEGIN __packed
-#define PACK_STRUCT_STRUCT 
-#define PACK_STRUCT_END
-#define PACK_STRUCT_FIELD(x) x
-
-#elif defined (__GNUC__)
-
-#define PACK_STRUCT_BEGIN
-#define PACK_STRUCT_STRUCT __attribute__ ((__packed__))
-#define PACK_STRUCT_END
-#define PACK_STRUCT_FIELD(x) x
-
-#elif defined (__TASKING__)
-
-#define PACK_STRUCT_BEGIN
-#define PACK_STRUCT_STRUCT
-#define PACK_STRUCT_END
-#define PACK_STRUCT_FIELD(x) x
-
-#endif
-
-#define LWIP_PLATFORM_ASSERT(x) do { if(!(x)) while(1); } while(0)
-
-#endif /* __CC_H__ */
diff --git a/tinyusb/examples/device/net_lwip_webserver/src/lwipopts.h b/tinyusb/examples/device/net_lwip_webserver/src/lwipopts.h
deleted file mode 100755
index 5a8096f5..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/src/lwipopts.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
- * All rights reserved. 
- * 
- * Redistribution and use in source and binary forms, with or without modification, 
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- * 
- * Author: Simon Goldschmidt
- *
- */
-#ifndef __LWIPOPTS_H__
-#define __LWIPOPTS_H__
-
-/* Prevent having to link sys_arch.c (we don't test the API layers in unit tests) */
-#define NO_SYS                          1
-#define MEM_ALIGNMENT                   4
-#define LWIP_RAW                        0
-#define LWIP_NETCONN                    0
-#define LWIP_SOCKET                     0
-#define LWIP_DHCP                       0
-#define LWIP_ICMP                       1
-#define LWIP_UDP                        1
-#define LWIP_TCP                        1
-#define ETH_PAD_SIZE                    0
-#define LWIP_IP_ACCEPT_UDP_PORT(p)      ((p) == PP_NTOHS(67))
-
-#define TCP_MSS                         (1500 /*mtu*/ - 20 /*iphdr*/ - 20 /*tcphhr*/)
-#define TCP_SND_BUF                     (2 * TCP_MSS)
-
-#define ETHARP_SUPPORT_STATIC_ENTRIES   1
-
-#define LWIP_HTTPD_CGI                  0
-#define LWIP_HTTPD_SSI                  0
-#define LWIP_HTTPD_SSI_INCLUDE_TAG      0
-
-#define LWIP_SINGLE_NETIF               1
-
-#endif /* __LWIPOPTS_H__ */
diff --git a/tinyusb/examples/device/net_lwip_webserver/src/main.c b/tinyusb/examples/device/net_lwip_webserver/src/main.c
deleted file mode 100755
index 80831921..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/src/main.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Peter Lawrence
- *
- * influenced by lrndis https://github.com/fetisov/lrndis
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-/*
-this appears as either a RNDIS or CDC-ECM USB virtual network adapter; the OS picks its preference
-
-RNDIS should be valid on Linux and Windows hosts, and CDC-ECM should be valid on Linux and macOS hosts
-
-The MCU appears to the host as IP address 192.168.7.1, and provides a DHCP server, DNS server, and web server.
-*/
-/*
-Some smartphones *may* work with this implementation as well, but likely have limited (broken) drivers,
-and likely their manufacturer has not tested such functionality.  Some code workarounds could be tried:
-
-The smartphone may only have an ECM driver, but refuse to automatically pick ECM (unlike the OSes above);
-try modifying ./examples/devices/net_lwip_webserver/usb_descriptors.c so that CONFIG_ID_ECM is default.
-
-The smartphone may be artificially picky about which Ethernet MAC address to recognize; if this happens, 
-try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 (clearing bit 1).
-*/
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-#include "dhserver.h"
-#include "dnserver.h"
-#include "lwip/init.h"
-#include "lwip/timeouts.h"
-#include "httpd.h"
-
-/* lwip context */
-static struct netif netif_data;
-
-/* shared between tud_network_recv_cb() and service_traffic() */
-static struct pbuf *received_frame;
-
-/* this is used by this code, ./class/net/net_driver.c, and usb_descriptors.c */
-/* ideally speaking, this should be generated from the hardware's unique ID (if available) */
-/* it is suggested that the first byte is 0x02 to indicate a link-local address */
-const uint8_t tud_network_mac_address[6] = {0x02,0x02,0x84,0x6A,0x96,0x00};
-
-/* network parameters of this MCU */
-static const ip_addr_t ipaddr  = IPADDR4_INIT_BYTES(192, 168, 7, 1);
-static const ip_addr_t netmask = IPADDR4_INIT_BYTES(255, 255, 255, 0);
-static const ip_addr_t gateway = IPADDR4_INIT_BYTES(0, 0, 0, 0);
-
-/* database IP addresses that can be offered to the host; this must be in RAM to store assigned MAC addresses */
-static dhcp_entry_t entries[] =
-{
-    /* mac ip address                          lease time */
-    { {0}, IPADDR4_INIT_BYTES(192, 168, 7, 2), 24 * 60 * 60 },
-    { {0}, IPADDR4_INIT_BYTES(192, 168, 7, 3), 24 * 60 * 60 },
-    { {0}, IPADDR4_INIT_BYTES(192, 168, 7, 4), 24 * 60 * 60 },
-};
-
-static const dhcp_config_t dhcp_config =
-{
-    .router = IPADDR4_INIT_BYTES(0, 0, 0, 0),  /* router address (if any) */
-    .port = 67,                                /* listen port */
-    .dns = IPADDR4_INIT_BYTES(192, 168, 7, 1), /* dns server (if any) */
-    "usb",                                     /* dns suffix */
-    TU_ARRAY_SIZE(entries),                    /* num entry */
-    entries                                    /* entries */
-};
-static err_t linkoutput_fn(struct netif *netif, struct pbuf *p)
-{
-  (void)netif;
-
-  for (;;)
-  {
-    /* if TinyUSB isn't ready, we must signal back to lwip that there is nothing we can do */
-    if (!tud_ready())
-      return ERR_USE;
-
-    /* if the network driver can accept another packet, we make it happen */
-    if (tud_network_can_xmit())
-    {
-      tud_network_xmit(p, 0 /* unused for this example */);
-      return ERR_OK;
-    }
-
-    /* transfer execution to TinyUSB in the hopes that it will finish transmitting the prior packet */
-    tud_task();
-  }
-}
-
-static err_t output_fn(struct netif *netif, struct pbuf *p, const ip_addr_t *addr)
-{
-  return etharp_output(netif, p, addr);
-}
-
-static err_t netif_init_cb(struct netif *netif)
-{
-  LWIP_ASSERT("netif != NULL", (netif != NULL));
-  netif->mtu = CFG_TUD_NET_MTU;
-  netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP | NETIF_FLAG_UP;
-  netif->state = NULL;
-  netif->name[0] = 'E';
-  netif->name[1] = 'X';
-  netif->linkoutput = linkoutput_fn;
-  netif->output = output_fn;
-  return ERR_OK;
-}
-
-static void init_lwip(void)
-{
-  struct netif *netif = &netif_data;
-
-  lwip_init();
-
-  /* the lwip virtual MAC address must be different from the host's; to ensure this, we toggle the LSbit */
-  netif->hwaddr_len = sizeof(tud_network_mac_address);
-  memcpy(netif->hwaddr, tud_network_mac_address, sizeof(tud_network_mac_address));
-  netif->hwaddr[5] ^= 0x01;
-
-  netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ip_input);
-  netif_set_default(netif);
-}
-
-/* handle any DNS requests from dns-server */
-bool dns_query_proc(const char *name, ip_addr_t *addr)
-{
-  if (0 == strcmp(name, "tiny.usb"))
-  {
-    *addr = ipaddr;
-    return true;
-  }
-  return false;
-}
-
-bool tud_network_recv_cb(const uint8_t *src, uint16_t size)
-{
-  /* this shouldn't happen, but if we get another packet before 
-  parsing the previous, we must signal our inability to accept it */
-  if (received_frame) return false;
-
-  if (size)
-  {
-    struct pbuf *p = pbuf_alloc(PBUF_RAW, size, PBUF_POOL);
-
-    if (p)
-    {
-      /* pbuf_alloc() has already initialized struct; all we need to do is copy the data */
-      memcpy(p->payload, src, size);
-
-      /* store away the pointer for service_traffic() to later handle */
-      received_frame = p;
-    }
-  }
-
-  return true;
-}
-
-uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg)
-{
-  struct pbuf *p = (struct pbuf *)ref;
-
-  (void)arg; /* unused for this example */
-
-  return pbuf_copy_partial(p, dst, p->tot_len, 0);
-}
-
-static void service_traffic(void)
-{
-  /* handle any packet received by tud_network_recv_cb() */
-  if (received_frame)
-  {
-    ethernet_input(received_frame, &netif_data);
-    pbuf_free(received_frame);
-    received_frame = NULL;
-    tud_network_recv_renew();
-  }
-
-  sys_check_timeouts();
-}
-
-void tud_network_init_cb(void)
-{
-  /* if the network is re-initializing and we have a leftover packet, we must do a cleanup */
-  if (received_frame)
-  {
-    pbuf_free(received_frame);
-    received_frame = NULL;
-  }
-}
-
-int main(void)
-{
-  /* initialize TinyUSB */
-  board_init();
-  tusb_init();
-
-  /* initialize lwip, dhcp-server, dns-server, and http */
-  init_lwip();
-  while (!netif_is_up(&netif_data));
-  while (dhserv_init(&dhcp_config) != ERR_OK);
-  while (dnserv_init(&ipaddr, 53, dns_query_proc) != ERR_OK);
-  httpd_init();
-
-  while (1)
-  {
-    tud_task();
-    service_traffic();
-  }
-
-  return 0;
-}
-
-/* lwip has provision for using a mutex, when applicable */
-sys_prot_t sys_arch_protect(void)
-{
-  return 0;
-}
-void sys_arch_unprotect(sys_prot_t pval)
-{
-  (void)pval;
-}
-
-/* lwip needs a millisecond time source, and the TinyUSB board support code has one available */
-uint32_t sys_now(void)
-{
-  return board_millis();
-}
diff --git a/tinyusb/examples/device/net_lwip_webserver/src/tusb_config.h b/tinyusb/examples/device/net_lwip_webserver/src/tusb_config.h
deleted file mode 100755
index 262d4ebc..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/src/tusb_config.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            0
-#define CFG_TUD_NET               1
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/net_lwip_webserver/src/usb_descriptors.c b/tinyusb/examples/device/net_lwip_webserver/src/usb_descriptors.c
deleted file mode 100755
index 71e6c458..00000000
--- a/tinyusb/examples/device/net_lwip_webserver/src/usb_descriptors.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]       NET | VENDOR | MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(NET, 5) )
-
-// String Descriptor Index
-enum
-{
-  STRID_LANGID = 0,
-  STRID_MANUFACTURER,
-  STRID_PRODUCT,
-  STRID_SERIAL,
-  STRID_INTERFACE,
-  STRID_MAC
-};
-
-enum
-{
-  ITF_NUM_CDC = 0,
-  ITF_NUM_CDC_DATA,
-  ITF_NUM_TOTAL
-};
-
-enum
-{
-  CONFIG_ID_RNDIS = 0,
-  CONFIG_ID_ECM   = 1,
-  CONFIG_ID_COUNT
-};
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) device class
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-    
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0101,
-
-    .iManufacturer      = STRID_MANUFACTURER,
-    .iProduct           = STRID_PRODUCT,
-    .iSerialNumber      = STRID_SERIAL,
-
-    .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-#define MAIN_CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN)
-#define ALT_CONFIG_TOTAL_LEN     (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  #define EPNUM_NET_NOTIF   0x81
-  #define EPNUM_NET_OUT     0x02
-  #define EPNUM_NET_IN      0x82
-
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
-  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_NET_NOTIF   0x81
-  #define EPNUM_NET_OUT     0x02
-  #define EPNUM_NET_IN      0x83
-
-#else
-  #define EPNUM_NET_NOTIF   0x81
-  #define EPNUM_NET_OUT     0x02
-  #define EPNUM_NET_IN      0x82
-#endif
-
-static uint8_t const rndis_configuration[] =
-{
-  // Config number (index+1), interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE),
-};
-
-static uint8_t const ecm_configuration[] =
-{
-  // Config number (index+1), interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100),
-
-  // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size.
-  TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU),
-};
-
-// Configuration array: RNDIS and CDC-ECM
-// - Windows only works with RNDIS
-// - MacOS only works with CDC-ECM
-// - Linux will work on both
-static uint8_t const * const configuration_arr[2] =
-{
-  [CONFIG_ID_RNDIS] = rndis_configuration,
-  [CONFIG_ID_ECM  ] = ecm_configuration
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-static char const* string_desc_arr [] =
-{
-  [STRID_LANGID]       = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409)
-  [STRID_MANUFACTURER] = "TinyUSB",                     // Manufacturer
-  [STRID_PRODUCT]      = "TinyUSB Device",              // Product
-  [STRID_SERIAL]       = "123456",                      // Serial
-  [STRID_INTERFACE]    = "TinyUSB Network Interface"    // Interface Description
-
-  // STRID_MAC index is handled separately
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  unsigned int chr_count = 0;
-
-  if (STRID_LANGID == index)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[STRID_LANGID], 2);
-    chr_count = 1;
-  }
-  else if (STRID_MAC == index)
-  {
-    // Convert MAC address into UTF-16
-
-    for (unsigned i=0; i<sizeof(tud_network_mac_address); i++)
-    {
-      _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf];
-      _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf];
-    }
-  }
-  else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1;
-
-    // Convert ASCII string into UTF-16
-    for (unsigned int i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC11UXX b/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC11UXX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC11UXX
+++ /dev/null
diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC13XX b/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC13XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/uac2_headset/.skip.MCU_LPC13XX
+++ /dev/null
diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_NUC121 b/tinyusb/examples/device/uac2_headset/.skip.MCU_NUC121
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/uac2_headset/.skip.MCU_NUC121
+++ /dev/null
diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMD11 b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMD11
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMD11
+++ /dev/null
diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAME5X b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAME5X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAME5X
+++ /dev/null
diff --git a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMG b/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMG
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/device/uac2_headset/.skip.MCU_SAMG
+++ /dev/null
diff --git a/tinyusb/examples/device/uac2_headset/CMakeLists.txt b/tinyusb/examples/device/uac2_headset/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/uac2_headset/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/uac2_headset/Makefile b/tinyusb/examples/device/uac2_headset/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/uac2_headset/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/uac2_headset/src/main.c b/tinyusb/examples/device/uac2_headset/src/main.c
deleted file mode 100755
index 790af088..00000000
--- a/tinyusb/examples/device/uac2_headset/src/main.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Jerzy Kasenberg
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTOTYPES
-//--------------------------------------------------------------------+
-
-// List of supported sample rates
-#if defined(__RX__)
-const uint32_t sample_rates[]       = {44100, 48000};
-#else
-const uint32_t sample_rates[]       = {44100, 48000, 88200, 96000};
-#endif
-uint32_t       current_sample_rate  = 44100;
-
-#define N_SAMPLE_RATES  TU_ARRAY_SIZE(sample_rates)
-
-/* Blink pattern
- * - 25 ms   : streaming data
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum
-{
-  BLINK_STREAMING = 25,
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 1000,
-  BLINK_SUSPENDED = 2500,
-};
-
-enum
-{
-  VOLUME_CTRL_0_DB = 0,
-  VOLUME_CTRL_10_DB = 2560,
-  VOLUME_CTRL_20_DB = 5120,
-  VOLUME_CTRL_30_DB = 7680,
-  VOLUME_CTRL_40_DB = 10240,
-  VOLUME_CTRL_50_DB = 12800,
-  VOLUME_CTRL_60_DB = 15360,
-  VOLUME_CTRL_70_DB = 17920,
-  VOLUME_CTRL_80_DB = 20480,
-  VOLUME_CTRL_90_DB = 23040,
-  VOLUME_CTRL_100_DB = 25600,
-  VOLUME_CTRL_SILENCE = 0x8000,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-// Audio controls
-// Current states
-int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];       // +1 for master channel 0
-int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];    // +1 for master channel 0
-
-// Buffer for microphone data
-int32_t mic_buf[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ / 4];
-// Buffer for speaker data
-int32_t spk_buf[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ / 4];
-// Speaker data size received in the last frame
-int spk_data_size;
-// Resolution per format
-const uint8_t resolutions_per_format[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = {CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX,
-                                                                        CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX};
-// Current resolution, update on format change
-uint8_t current_resolution;
-
-void led_blinking_task(void);
-void audio_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  TU_LOG1("Headset running\r\n");
-
-  while (1)
-  {
-    tud_task(); // TinyUSB device task
-    audio_task();
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void)remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Helper for clock get requests
-static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request)
-{
-  TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK);
-
-  if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ)
-  {
-    if (request->bRequest == AUDIO_CS_REQ_CUR)
-    {
-      TU_LOG1("Clock get current freq %u\r\n", current_sample_rate);
-
-      audio_control_cur_4_t curf = { tu_htole32(current_sample_rate) };
-      return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf));
-    }
-    else if (request->bRequest == AUDIO_CS_REQ_RANGE)
-    {
-      audio_control_range_4_n_t(N_SAMPLE_RATES) rangef =
-      {
-        .wNumSubRanges = tu_htole16(N_SAMPLE_RATES)
-      };
-      TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES);
-      for(uint8_t i = 0; i < N_SAMPLE_RATES; i++)
-      {
-        rangef.subrange[i].bMin = sample_rates[i];
-        rangef.subrange[i].bMax = sample_rates[i];
-        rangef.subrange[i].bRes = 0;
-        TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes);
-      }
-      
-      return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef));
-    }
-  }
-  else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID &&
-           request->bRequest == AUDIO_CS_REQ_CUR)
-  {
-    audio_control_cur_1_t cur_valid = { .bCur = 1 };
-    TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur);
-    return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_valid, sizeof(cur_valid));
-  }
-  TU_LOG1("Clock get request not supported, entity = %u, selector = %u, request = %u\r\n",
-          request->bEntityID, request->bControlSelector, request->bRequest);
-  return false;
-}
-
-// Helper for clock set requests
-static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf)
-{
-  (void)rhport;
-
-  TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK);
-  TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR);
-
-  if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ)
-  {
-    TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t));
-
-    current_sample_rate = ((audio_control_cur_4_t *)buf)->bCur;
-
-    TU_LOG1("Clock set current freq: %d\r\n", current_sample_rate);
-
-    return true;
-  }
-  else
-  {
-    TU_LOG1("Clock set request not supported, entity = %u, selector = %u, request = %u\r\n",
-            request->bEntityID, request->bControlSelector, request->bRequest);
-    return false;
-  }
-}
-
-// Helper for feature unit get requests
-static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request)
-{
-  TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT);
-
-  if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR)
-  {
-    audio_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] };
-    TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur);
-    return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &mute1, sizeof(mute1));
-  }
-  else if (UAC2_ENTITY_SPK_FEATURE_UNIT && request->bControlSelector == AUDIO_FU_CTRL_VOLUME)
-  {
-    if (request->bRequest == AUDIO_CS_REQ_RANGE)
-    {
-      audio_control_range_2_n_t(1) range_vol = {
-        .wNumSubRanges = tu_htole16(1),
-        .subrange[0] = { .bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256) }
-      };
-      TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber,
-              range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256);
-      return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &range_vol, sizeof(range_vol));
-    }
-    else if (request->bRequest == AUDIO_CS_REQ_CUR)
-    {
-      audio_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) };
-      TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256);
-      return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_vol, sizeof(cur_vol));
-    }
-  }
-  TU_LOG1("Feature unit get request not supported, entity = %u, selector = %u, request = %u\r\n",
-          request->bEntityID, request->bControlSelector, request->bRequest);
-
-  return false;
-}
-
-// Helper for feature unit set requests
-static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf)
-{
-  (void)rhport;
-
-  TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT);
-  TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR);
-
-  if (request->bControlSelector == AUDIO_FU_CTRL_MUTE)
-  {
-    TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t));
-
-    mute[request->bChannelNumber] = ((audio_control_cur_1_t *)buf)->bCur;
-
-    TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]);
-
-    return true;
-  }
-  else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME)
-  {
-    TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t));
-
-    volume[request->bChannelNumber] = ((audio_control_cur_2_t const *)buf)->bCur;
-
-    TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256);
-
-    return true;
-  }
-  else
-  {
-    TU_LOG1("Feature unit set request not supported, entity = %u, selector = %u, request = %u\r\n",
-            request->bEntityID, request->bControlSelector, request->bRequest);
-    return false;
-  }
-}
-
-//--------------------------------------------------------------------+
-// Application Callback API Implementations
-//--------------------------------------------------------------------+
-
-// Invoked when audio class specific get request received for an entity
-bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request)
-{
-  audio_control_request_t *request = (audio_control_request_t *)p_request;
-
-  if (request->bEntityID == UAC2_ENTITY_CLOCK)
-    return tud_audio_clock_get_request(rhport, request);
-  if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT)
-    return tud_audio_feature_unit_get_request(rhport, request);
-  else
-  {
-    TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n",
-            request->bEntityID, request->bControlSelector, request->bRequest);
-  }
-  return false;
-}
-
-// Invoked when audio class specific set request received for an entity
-bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf)
-{
-  audio_control_request_t const *request = (audio_control_request_t const *)p_request;
-
-  if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT)
-    return tud_audio_feature_unit_set_request(rhport, request, buf);
-  if (request->bEntityID == UAC2_ENTITY_CLOCK)
-    return tud_audio_clock_set_request(rhport, request, buf);
-  TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n",
-          request->bEntityID, request->bControlSelector, request->bRequest);
-
-  return false;
-}
-
-bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void)rhport;
-
-  uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex));
-  uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue));
-
-  if (ITF_NUM_AUDIO_STREAMING_SPK == itf && alt == 0)
-      blink_interval_ms = BLINK_MOUNTED;
-
-  return true;
-}
-
-bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request)
-{
-  (void)rhport;
-  uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex));
-  uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue));
-
-  TU_LOG2("Set interface %d alt %d\r\n", itf, alt);
-  if (ITF_NUM_AUDIO_STREAMING_SPK == itf && alt != 0)
-      blink_interval_ms = BLINK_STREAMING;
-
-  // Clear buffer when streaming format is changed
-  spk_data_size = 0;
-  if(alt != 0)
-  {
-    current_resolution = resolutions_per_format[alt-1];
-  }
-
-  return true;
-}
-
-bool tud_audio_rx_done_pre_read_cb(uint8_t rhport, uint16_t n_bytes_received, uint8_t func_id, uint8_t ep_out, uint8_t cur_alt_setting)
-{
-  (void)rhport;
-  (void)func_id;
-  (void)ep_out;
-  (void)cur_alt_setting;
-
-  spk_data_size = tud_audio_read(spk_buf, n_bytes_received);
-  return true;
-}
-
-bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
-{
-  (void)rhport;
-  (void)itf;
-  (void)ep_in;
-  (void)cur_alt_setting;
-
-  // This callback could be used to fill microphone data separately
-  return true;
-}
-
-//--------------------------------------------------------------------+
-// AUDIO Task
-//--------------------------------------------------------------------+
-
-void audio_task(void)
-{
-  // When new data arrived, copy data from speaker buffer, to microphone buffer
-  // and send it over
-  // Only support speaker & headphone both have the same resolution
-  // If one is 16bit another is 24bit be care of LOUD noise !
-  if (spk_data_size)
-  {
-    if (current_resolution == 16)
-    {
-      int16_t *src = (int16_t*)spk_buf;
-      int16_t *limit = (int16_t*)spk_buf + spk_data_size / 2;
-      int16_t *dst = (int16_t*)mic_buf;
-      while (src < limit)
-      {
-        // Combine two channels into one
-        int32_t left = *src++;
-        int32_t right = *src++;
-        *dst++ = (left >> 1) + (right >> 1);
-      }
-      tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2);
-      spk_data_size = 0;
-    }
-    else if (current_resolution == 24)
-    {
-      int32_t *src = spk_buf;
-      int32_t *limit = spk_buf + spk_data_size / 4;
-      int32_t *dst = mic_buf;
-      while (src < limit)
-      {
-        // Combine two channels into one
-        int32_t left = *src++;
-        int32_t right = *src++;
-        *dst++ = ((left >> 1) + (right >> 1)) & 0xffffff00;
-      }
-      tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2);
-      spk_data_size = 0;
-    }
-  }
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if (board_millis() - start_ms < blink_interval_ms) return;
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state;
-}
diff --git a/tinyusb/examples/device/uac2_headset/src/tusb_config.h b/tinyusb/examples/device/uac2_headset/src/tusb_config.h
deleted file mode 100755
index e8d93f56..00000000
--- a/tinyusb/examples/device/uac2_headset/src/tusb_config.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Ha Thach (tinyusb.org)
- * Copyright (c) 2020 Jerzy Kasenberg
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-#include "usb_descriptors.h"
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-#error CFG_TUSB_MCU must be defined
-#endif
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
-
-#ifndef CFG_TUSB_DEBUG
-// Can be set during compilation i.e.: make LOG=<value for CFG_TUSB_DEBUG> BOARD=<bsp>
-// Keep in mind that enabling logs when data is streaming can disrupt data flow.
-// It can be very helpful though when audio unit requests are tested/debugged.
-#define CFG_TUSB_DEBUG              0
-#endif
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               0
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_AUDIO             1
-#define CFG_TUD_VENDOR            0
-
-//--------------------------------------------------------------------
-// AUDIO CLASS DRIVER CONFIGURATION
-//--------------------------------------------------------------------
-
-#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                TUD_AUDIO_HEADSET_STEREO_DESC_LEN
-
-// How many formats are used, need to adjust USB descriptor if changed
-#define CFG_TUD_AUDIO_FUNC_1_N_FORMATS                               2
-
-// Audio format type I specifications
-#if defined(__RX__)
-#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE                         48000     // 16bit/48kHz is the best quality for Renesas RX
-#else
-#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE                         96000     // 24bit/96kHz is the best quality for full-speed, high-speed is needed beyond this
-#endif
-#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                           1
-#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX                           2
-
-// 16bit in 16bit slots
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX          2
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX                  16
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX          2
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX                  16
-
-#if defined(__RX__)
-// 8bit in 8bit slots
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX          1
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX                  8
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX          1
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX                  8
-#else
-// 24bit in 32bit slots
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX          4
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX                  24
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX          4
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX                  24
-#endif
-
-// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense)
-#define CFG_TUD_AUDIO_ENABLE_EP_IN                1
-
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN    TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
-#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN    TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
-
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ      TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN)*2
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX         TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used
-
-// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense)
-#define CFG_TUD_AUDIO_ENABLE_EP_OUT               1
-
-#define CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT    TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX)
-#define CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT    TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX)
-
-#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ     TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT)*2
-#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX        TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used
-
-// Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes)
-#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 	          2
-
-// Size of control request buffer
-#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ	64
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/uac2_headset/src/usb_descriptors.c b/tinyusb/examples/device/uac2_headset/src/usb_descriptors.c
deleted file mode 100755
index 4a26b0b1..00000000
--- a/tinyusb/examples/device/uac2_headset/src/usb_descriptors.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Ha Thach (tinyusb.org)
- * Copyright (c) 2020 Jerzy Kasenberg
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]     AUDIO | MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-    _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *)&desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-#define CONFIG_TOTAL_LEN    	(TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_HEADSET_STEREO_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-#define EPNUM_AUDIO_IN    0x03
-#define EPNUM_AUDIO_OUT   0x03
-#elif CFG_TUSB_MCU == OPT_MCU_NRF5X
-// ISO endpoints for NRF5x are fixed to 0x08 (0x88)
-#define EPNUM_AUDIO_IN    0x08
-#define EPNUM_AUDIO_OUT   0x08
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
-// SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
-//    e.g EP1 OUT & EP1 IN cannot exist together
-#define EPNUM_AUDIO_IN    0x01
-#define EPNUM_AUDIO_OUT   0x02
-#else
-#define EPNUM_AUDIO_IN    0x01
-#define EPNUM_AUDIO_OUT   0x01
-#endif
-
-uint8_t const desc_configuration[] =
-{
-    // Interface count, string index, total length, attribute, power in mA
-    TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-    // Interface number, string index, EP Out & EP In address, EP size
-    TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void)index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 },  // 0: is supported language is English (0x0409)
-  "TinyUSB",                      // 1: Manufacturer
-  "TinyUSB headset",              // 2: Product
-  "000001",                       // 3: Serials, should use chip ID
-  "TinyUSB Speakers",             // 4: Audio Interface
-  "TinyUSB Microphone",           // 5: Audio Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void)langid;
-
-  uint8_t chr_count;
-
-  if (index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }
-  else
-  {
-    // Convert ASCII string into UTF-16
-
-    if (!(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0]))) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if (chr_count > 31) chr_count = 31;
-
-    for (uint8_t i = 0; i < chr_count; i++)
-    {
-      _desc_str[1 + i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2 * chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/uac2_headset/src/usb_descriptors.h b/tinyusb/examples/device/uac2_headset/src/usb_descriptors.h
deleted file mode 100755
index d9510ea4..00000000
--- a/tinyusb/examples/device/uac2_headset/src/usb_descriptors.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Jerzy Kasenbreg
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _USB_DESCRIPTORS_H_
-#define _USB_DESCRIPTORS_H_
-
-// #include "tusb.h"
-
-// Unit numbers are arbitrary selected
-#define UAC2_ENTITY_CLOCK               0x04
-// Speaker path
-#define UAC2_ENTITY_SPK_INPUT_TERMINAL  0x01
-#define UAC2_ENTITY_SPK_FEATURE_UNIT    0x02
-#define UAC2_ENTITY_SPK_OUTPUT_TERMINAL 0x03
-// Microphone path
-#define UAC2_ENTITY_MIC_INPUT_TERMINAL  0x11
-#define UAC2_ENTITY_MIC_OUTPUT_TERMINAL 0x13
-
-enum
-{
-  ITF_NUM_AUDIO_CONTROL = 0,
-  ITF_NUM_AUDIO_STREAMING_SPK,
-  ITF_NUM_AUDIO_STREAMING_MIC,
-  ITF_NUM_TOTAL
-};
-
-#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\
-    + TUD_AUDIO_DESC_STD_AC_LEN\
-    + TUD_AUDIO_DESC_CS_AC_LEN\
-    + TUD_AUDIO_DESC_CLK_SRC_LEN\
-    + TUD_AUDIO_DESC_INPUT_TERM_LEN\
-    + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\
-    + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\
-    + TUD_AUDIO_DESC_INPUT_TERM_LEN\
-    + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\
-    /* Interface 1, Alternate 0 */\
-    + TUD_AUDIO_DESC_STD_AS_INT_LEN\
-    /* Interface 1, Alternate 0 */\
-    + TUD_AUDIO_DESC_STD_AS_INT_LEN\
-    + TUD_AUDIO_DESC_CS_AS_INT_LEN\
-    + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\
-    + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\
-    + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\
-    /* Interface 1, Alternate 2 */\
-    + TUD_AUDIO_DESC_STD_AS_INT_LEN\
-    + TUD_AUDIO_DESC_CS_AS_INT_LEN\
-    + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\
-    + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\
-    + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\
-    /* Interface 2, Alternate 0 */\
-    + TUD_AUDIO_DESC_STD_AS_INT_LEN\
-    /* Interface 2, Alternate 1 */\
-    + TUD_AUDIO_DESC_STD_AS_INT_LEN\
-    + TUD_AUDIO_DESC_CS_AS_INT_LEN\
-    + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\
-    + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\
-    + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\
-    /* Interface 2, Alternate 2 */\
-    + TUD_AUDIO_DESC_STD_AS_INT_LEN\
-    + TUD_AUDIO_DESC_CS_AS_INT_LEN\
-    + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\
-    + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\
-    + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN)
-
-#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \
-    /* Standard Interface Association Descriptor (IAD) */\
-    TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\
-    /* Standard AC Interface Descriptor(4.7.1) */\
-    TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\
-    /* Class-Specific AC Interface Header Descriptor(4.7.2) */\
-    TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\
-    /* Clock Source Descriptor(4.7.2.1) */\
-    TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00,  /*_stridx*/ 0x00),    \
-    /* Input Terminal Descriptor(4.7.2.4) */\
-    TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\
-    /* Feature Unit Descriptor(4.7.2.8) */\
-    TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\
-    /* Output Terminal Descriptor(4.7.2.5) */\
-    TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\
-    /* Input Terminal Descriptor(4.7.2.4) */\
-    TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\
-    /* Output Terminal Descriptor(4.7.2.5) */\
-    TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\
-    /* Standard AS Interface Descriptor(4.9.1) */\
-    /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\
-    TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\
-    /* Standard AS Interface Descriptor(4.9.1) */\
-    /* Interface 1, Alternate 1 - alternate interface for data streaming */\
-    TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\
-    /* Class-Specific AS Interface Descriptor(4.9.2) */\
-    TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\
-    /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
-    TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\
-    /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\
-    /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
-    TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\
-    /* Interface 1, Alternate 2 - alternate interface for data streaming */\
-    TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\
-    /* Class-Specific AS Interface Descriptor(4.9.2) */\
-    TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\
-    /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
-    TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\
-    /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\
-    /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
-    TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\
-    /* Standard AS Interface Descriptor(4.9.1) */\
-    /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\
-    TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\
-    /* Standard AS Interface Descriptor(4.9.1) */\
-    /* Interface 2, Alternate 1 - alternate interface for data streaming */\
-    TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\
-    /* Class-Specific AS Interface Descriptor(4.9.2) */\
-    TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\
-    /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
-    TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\
-    /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\
-    /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
-    TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
-    /* Interface 2, Alternate 2 - alternate interface for data streaming */\
-    TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\
-    /* Class-Specific AS Interface Descriptor(4.9.2) */\
-    TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\
-    /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
-    TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\
-    /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\
-    /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
-    TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
-
-#endif
diff --git a/tinyusb/examples/device/usbtmc/CMakeLists.txt b/tinyusb/examples/device/usbtmc/CMakeLists.txt
deleted file mode 100755
index c49603c2..00000000
--- a/tinyusb/examples/device/usbtmc/CMakeLists.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/usbtmc/Makefile b/tinyusb/examples/device/usbtmc/Makefile
deleted file mode 100755
index 69b633fe..00000000
--- a/tinyusb/examples/device/usbtmc/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/usbtmc/src/main.c b/tinyusb/examples/device/usbtmc/src/main.c
deleted file mode 100755
index 1fce48f4..00000000
--- a/tinyusb/examples/device/usbtmc/src/main.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-#include "usbtmc_app.h"
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 0 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED = 0,
-  BLINK_SUSPENDED = 2500,
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-void led_blinking_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    led_blinking_task();
-    usbtmc_app_task_iter();
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK + Indicator pulse
-//--------------------------------------------------------------------+
-
-
-volatile uint8_t doPulse = false;
-// called from USB context
-void led_indicator_pulse(void) {
-	doPulse = true;
-}
-
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-  if(blink_interval_ms == BLINK_MOUNTED) // Mounted
-  {
-    if(doPulse)
-    {
-      led_state = true;
-      board_led_write(true);
-      start_ms = board_millis();
-      doPulse = false;
-    }
-    else if (led_state == true)
-    {
-      if ( board_millis() - start_ms < 750) //Spec says blink must be between 500 and 1000 ms.
-      {
-        return; // not enough time
-      }
-      led_state = false;
-      board_led_write(false);
-    }
-  }
-  else
-  {
-    // Blink every interval ms
-    if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-    start_ms += blink_interval_ms;
-
-    board_led_write(led_state);
-    led_state = 1 - led_state; // toggle
-  }
-}
diff --git a/tinyusb/examples/device/usbtmc/src/main.h b/tinyusb/examples/device/usbtmc/src/main.h
deleted file mode 100755
index 673247ec..00000000
--- a/tinyusb/examples/device/usbtmc/src/main.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef MAIN_H
-#define MAIN_H
-void led_indicator_pulse(void);
-
-#endif
diff --git a/tinyusb/examples/device/usbtmc/src/tusb_config.h b/tinyusb/examples/device/usbtmc/src/tusb_config.h
deleted file mode 100755
index a192d0db..00000000
--- a/tinyusb/examples/device/usbtmc/src/tusb_config.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * tusb_config.h
- *
- *  Created on: Sep 5, 2019
- *      Author: nconrad
- */
-
-#ifndef TUSB_CONFIG_H_
-#define TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-
-#define CFG_TUD_USBTMC                1
-#define CFG_TUD_USBTMC_ENABLE_INT_EP  1
-#define CFG_TUD_USBTMC_ENABLE_488     1
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/usbtmc/src/usb_descriptors.c b/tinyusb/examples/device/usbtmc/src/usb_descriptors.c
deleted file mode 100755
index 2336266b..00000000
--- a/tinyusb/examples/device/usbtmc/src/usb_descriptors.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "class/usbtmc/usbtmc.h"
-#include "class/usbtmc/usbtmc_device.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]         HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-#if defined(CFG_TUD_USBTMC)
-
-#  define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints) \
-     TUD_USBTMC_IF_DESCRIPTOR(_itfnum, _bNumEndpoints,  /*_stridx = */ 4u, TUD_USBTMC_PROTOCOL_USB488), \
-     TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */USBTMCD_MAX_PACKET_SIZE)
-
-#if CFG_TUD_USBTMC_ENABLE_INT_EP
-// USBTMC Interrupt xfer always has length of 2, but we use epMaxSize=8 for
-//  compatibility with mcus that only allow 8, 16, 32 or 64 for FS endpoints
-#  define TUD_USBTMC_DESC(_itfnum) \
-     TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3), \
-     TUD_USBTMC_INT_DESCRIPTOR(/* INT ep # */ 0x82, /* epMaxSize = */ 8, /* bInterval = */16u )
-#  define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN + TUD_USBTMC_INT_DESCRIPTOR_LEN)
-
-#else
-
-#  define TUD_USBTMC_DESC(_itfnum) \
-     TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u)
-#  define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN)
-
-#endif /* CFG_TUD_USBTMC_ENABLE_INT_EP */
-
-#else
-#  define USBTMC_DESC_LEN (0)
-#endif /* CFG_TUD_USBTMC */
-
-enum
-{
-  ITF_NUM_USBTMC,
-  ITF_NUM_TOTAL
-};
-
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_USBTMC_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  // Note: since CDC EP ( 1 & 2), HID (4) are spot-on, thus we only need to force
-  // endpoint number for MSC to 5
-  #define EPNUM_MSC   0x05
-#else
-  #define EPNUM_MSC   0x03
-#endif
-
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  TUD_USBTMC_DESC(ITF_NUM_USBTMC),
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB USBTMC",              // 4: USBTMC
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  size_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }
-  else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) {
-      chr_count = 31;
-    }
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/usbtmc/src/usbtmc_app.c b/tinyusb/examples/device/usbtmc/src/usbtmc_app.c
deleted file mode 100755
index 8f87a6dc..00000000
--- a/tinyusb/examples/device/usbtmc/src/usbtmc_app.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Nathan Conrad
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <strings.h>
-#include <stdlib.h>     /* atoi */
-#include "tusb.h"
-#include "bsp/board.h"
-#include "main.h"
-
-#if (CFG_TUD_USBTMC_ENABLE_488)
-static usbtmc_response_capabilities_488_t const
-#else
-static usbtmc_response_capabilities_t const
-#endif
-tud_usbtmc_app_capabilities  =
-{
-    .USBTMC_status = USBTMC_STATUS_SUCCESS,
-    .bcdUSBTMC = USBTMC_VERSION,
-    .bmIntfcCapabilities =
-    {
-        .listenOnly = 0,
-        .talkOnly = 0,
-        .supportsIndicatorPulse = 1
-    },
-    .bmDevCapabilities = {
-        .canEndBulkInOnTermChar = 0
-    },
-
-#if (CFG_TUD_USBTMC_ENABLE_488)
-    .bcdUSB488 = USBTMC_488_VERSION,
-    .bmIntfcCapabilities488 =
-    {
-        .supportsTrigger = 1,
-        .supportsREN_GTL_LLO = 0,
-        .is488_2 = 1
-    },
-    .bmDevCapabilities488 =
-    {
-      .SCPI = 1,
-      .SR1 = 0,
-      .RL1 = 0,
-      .DT1 =0,
-    }
-#endif
-};
-
-#define IEEE4882_STB_QUESTIONABLE (0x08u)
-#define IEEE4882_STB_MAV          (0x10u)
-#define IEEE4882_STB_SER          (0x20u)
-#define IEEE4882_STB_SRQ          (0x40u)
-
-static const char idn[] = "TinyUSB,ModelNumber,SerialNumber,FirmwareVer123456\r\n";
-//static const char idn[] = "TinyUSB,ModelNumber,SerialNumber,FirmwareVer and a bunch of other text to make it longer than a packet, perhaps? lets make it three transfers...\n";
-static volatile uint8_t status;
-
-// 0=not query, 1=queried, 2=delay,set(MAV), 3=delay 4=ready?
-// (to simulate delay)
-static volatile uint16_t queryState = 0;
-static volatile uint32_t queryDelayStart;
-static volatile uint32_t bulkInStarted;
-static volatile uint32_t idnQuery;
-
-static uint32_t resp_delay = 125u; // Adjustable delay, to allow for better testing
-static size_t buffer_len;
-static size_t buffer_tx_ix; // for transmitting using multiple transfers
-static uint8_t buffer[225]; // A few packets long should be enough.
-
-
-static usbtmc_msg_dev_dep_msg_in_header_t rspMsg = {
-    .bmTransferAttributes =
-    {
-      .EOM = 1,
-      .UsingTermChar = 0
-    }
-};
-
-void tud_usbtmc_open_cb(uint8_t interface_id)
-{
-  (void)interface_id;
-  tud_usbtmc_start_bus_read();
-}
-
-#if (CFG_TUD_USBTMC_ENABLE_488)
-usbtmc_response_capabilities_488_t const *
-#else
-usbtmc_response_capabilities_t const *
-#endif
-tud_usbtmc_get_capabilities_cb()
-{
-  return &tud_usbtmc_app_capabilities;
-}
-
-
-bool tud_usbtmc_msg_trigger_cb(usbtmc_msg_generic_t* msg) {
-  (void)msg;
-  // Let trigger set the SRQ
-  status |= IEEE4882_STB_SRQ;
-  return true;
-}
-
-bool tud_usbtmc_msgBulkOut_start_cb(usbtmc_msg_request_dev_dep_out const * msgHeader)
-{
-  (void)msgHeader;
-  buffer_len = 0;
-  if(msgHeader->TransferSize > sizeof(buffer))
-  {
-
-    return false;
-  }
-  return true;
-}
-
-bool tud_usbtmc_msg_data_cb(void *data, size_t len, bool transfer_complete)
-{
-  // If transfer isn't finished, we just ignore it (for now)
-
-  if(len + buffer_len < sizeof(buffer))
-  {
-    memcpy(&(buffer[buffer_len]), data, len);
-    buffer_len += len;
-  }
-  else
-  {
-    return false; // buffer overflow!
-  }
-  queryState = transfer_complete;
-  idnQuery = 0;
-
-  if(transfer_complete && (len >=4) && !strncasecmp("*idn?",data,4))
-  {
-    idnQuery = 1;
-  }
-  if(transfer_complete && !strncasecmp("delay ",data,5))
-  {
-    queryState = 0;
-    int d = atoi((char*)data + 5);
-    if(d > 10000)
-      d = 10000;
-    if(d<0)
-      d=0;
-    resp_delay = (uint32_t)d;
-  }
-  tud_usbtmc_start_bus_read();
-  return true;
-}
-
-bool tud_usbtmc_msgBulkIn_complete_cb()
-{
-  if((buffer_tx_ix == buffer_len) || idnQuery) // done
-  {
-    status &= (uint8_t)~(IEEE4882_STB_MAV); // clear MAV
-    queryState = 0;
-    bulkInStarted = 0;
-    buffer_tx_ix = 0;
-  }
-  tud_usbtmc_start_bus_read();
-
-  return true;
-}
-
-static unsigned int msgReqLen;
-
-bool tud_usbtmc_msgBulkIn_request_cb(usbtmc_msg_request_dev_dep_in const * request)
-{
-  rspMsg.header.MsgID = request->header.MsgID,
-  rspMsg.header.bTag = request->header.bTag,
-  rspMsg.header.bTagInverse = request->header.bTagInverse;
-  msgReqLen = request->TransferSize;
-
-#ifdef xDEBUG
-  uart_tx_str_sync("MSG_IN_DATA: Requested!\r\n");
-#endif
-  if(queryState == 0 || (buffer_tx_ix == 0))
-  {
-    TU_ASSERT(bulkInStarted == 0);
-    bulkInStarted = 1;
-
-    // > If a USBTMC interface receives a Bulk-IN request prior to receiving a USBTMC command message
-    //   that expects a response, the device must NAK the request (*not stall*)
-  }
-  else
-  {
-    size_t txlen = tu_min32(buffer_len-buffer_tx_ix,msgReqLen);
-    tud_usbtmc_transmit_dev_msg_data(&buffer[buffer_tx_ix], txlen,
-        (buffer_tx_ix+txlen) == buffer_len, false);
-    buffer_tx_ix += txlen;
-  }
-  // Always return true indicating not to stall the EP.
-  return true;
-}
-
-void usbtmc_app_task_iter(void) {
-  switch(queryState) {
-  case 0:
-    break;
-  case 1:
-    queryDelayStart = board_millis();
-    queryState = 2;
-    break;
-  case 2:
-    if( (board_millis() - queryDelayStart) > resp_delay) {
-      queryDelayStart = board_millis();
-      queryState=3;
-      status |= 0x10u; // MAV
-      status |= 0x40u; // SRQ
-    }
-    break;
-  case 3:
-    if( (board_millis() - queryDelayStart) > resp_delay) {
-      queryState = 4;
-    }
-    break;
-  case 4: // time to transmit;
-    if(bulkInStarted && (buffer_tx_ix == 0)) {
-      if(idnQuery)
-      {
-        tud_usbtmc_transmit_dev_msg_data(idn,  tu_min32(sizeof(idn)-1,msgReqLen),true,false);
-        queryState = 0;
-        bulkInStarted = 0;
-      }
-      else
-      {
-        buffer_tx_ix = tu_min32(buffer_len,msgReqLen);
-        tud_usbtmc_transmit_dev_msg_data(buffer, buffer_tx_ix, buffer_tx_ix == buffer_len, false);
-      }
-      // MAV is cleared in the transfer complete callback.
-    }
-    break;
-  default:
-    TU_ASSERT(false,);
-    return;
-  }
-}
-
-bool tud_usbtmc_initiate_clear_cb(uint8_t *tmcResult)
-{
-  *tmcResult = USBTMC_STATUS_SUCCESS;
-  queryState = 0;
-  bulkInStarted = false;
-  status = 0;
-  return true;
-}
-
-bool tud_usbtmc_check_clear_cb(usbtmc_get_clear_status_rsp_t *rsp)
-{
-  queryState = 0;
-  bulkInStarted = false;
-  status = 0;
-  buffer_tx_ix = 0u;
-  buffer_len = 0u;
-  rsp->USBTMC_status = USBTMC_STATUS_SUCCESS;
-  rsp->bmClear.BulkInFifoBytes = 0u;
-  return true;
-}
-bool tud_usbtmc_initiate_abort_bulk_in_cb(uint8_t *tmcResult)
-{
-  bulkInStarted = 0;
-  *tmcResult = USBTMC_STATUS_SUCCESS;
-  return true;
-}
-bool tud_usbtmc_check_abort_bulk_in_cb(usbtmc_check_abort_bulk_rsp_t *rsp)
-{
-  (void)rsp;
-  tud_usbtmc_start_bus_read();
-  return true;
-}
-
-bool tud_usbtmc_initiate_abort_bulk_out_cb(uint8_t *tmcResult)
-{
-  *tmcResult = USBTMC_STATUS_SUCCESS;
-  return true;
-
-}
-bool tud_usbtmc_check_abort_bulk_out_cb(usbtmc_check_abort_bulk_rsp_t *rsp)
-{
-  (void)rsp;
-  tud_usbtmc_start_bus_read();
-  return true;
-}
-
-void tud_usbtmc_bulkIn_clearFeature_cb(void)
-{
-}
-void tud_usbtmc_bulkOut_clearFeature_cb(void)
-{
-  tud_usbtmc_start_bus_read();
-}
-
-// Return status byte, but put the transfer result status code in the rspResult argument.
-uint8_t tud_usbtmc_get_stb_cb(uint8_t *tmcResult)
-{
-  uint8_t old_status = status;
-  status = (uint8_t)(status & ~(IEEE4882_STB_SRQ)); // clear SRQ
-
-  *tmcResult = USBTMC_STATUS_SUCCESS;
-  // Increment status so that we see different results on each read...
-
-  return old_status;
-}
-
-bool tud_usbtmc_indicator_pulse_cb(tusb_control_request_t const * msg, uint8_t *tmcResult)
-{
-  (void)msg;
-  led_indicator_pulse();
-  *tmcResult = USBTMC_STATUS_SUCCESS;
-  return true;
-}
diff --git a/tinyusb/examples/device/usbtmc/src/usbtmc_app.h b/tinyusb/examples/device/usbtmc/src/usbtmc_app.h
deleted file mode 100755
index 4de30c2b..00000000
--- a/tinyusb/examples/device/usbtmc/src/usbtmc_app.h
+++ /dev/null
@@ -1,7 +0,0 @@
-
-#ifndef USBTMC_APP_H
-#define USBTMC_APP_H
-
-void usbtmc_app_task_iter(void);
-
-#endif
diff --git a/tinyusb/examples/device/usbtmc/visaQuery.py b/tinyusb/examples/device/usbtmc/visaQuery.py
deleted file mode 100755
index 50a765a0..00000000
--- a/tinyusb/examples/device/usbtmc/visaQuery.py
+++ /dev/null
@@ -1,209 +0,0 @@
-#!/usr/bin/env python3
-
-import visa
-import time
-import sys
-
-
-def test_idn():
-	idn = inst.query("*idn?");
-	assert (idn == "TinyUSB,ModelNumber,SerialNumber,FirmwareVer123456\r\n")
-	assert (inst.is_4882_compliant)
-
-def test_echo(m,n):
-	longstr = "0123456789abcdefghijklmnopqrstuvwxyz" * 50
-	t0 = time.monotonic()
-
-	#Next try echo from 1 to 175 characters (200 is max buffer size on DUT)
-	for i in range(m,n):
-		#print(i)
-		x = longstr[0:i]
-		xt = x + inst.write_termination
-		y = inst.query(x)
-		#print(x)
-		#print (":".join("{:02x}".format(ord(c)) for c in xt))
-		#print (":".join("{:02x}".format(ord(c)) for c in y))
-		assert(xt == y), f"failed i={i}"
-		#inst.read_stb();# Just to make USB logging easier by sending a control query (bad thing is that this made things slow)
-	t = time.monotonic() - t0
-	print(f"  elapsed: {t:0.3} sec")
-
-def test_trig():
-	# clear SRQ
-	inst.read_stb()
-	assert (inst.read_stb() == 0)
-	inst.assert_trigger()
-	time.sleep(0.3) # SRQ may have some delay
-	assert (inst.read_stb() & 0x40), "SRQ not set after 0.3 seconds"
-	assert (inst.read_stb() == 0)
-	
-	
-def test_mav():
-	inst.write("delay 50")
-	inst.read_stb() # clear STB
-	assert (inst.read_stb() == 0)
-	inst.write("123")
-	time.sleep(0.3)
-	assert (inst.read_stb() & 0x10), "MAV not set after 0.5 seconds"
-	
-	rsp = inst.read()
-	assert(rsp == "123\r\n")
-	
-	
-def test_srq():
-	assert (inst.read_stb() == 0)
-	inst.write("123")
-	
-	#inst.enable_event(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE)
-	#waitrsp = inst.wait_on_event(visa.constants.VI_EVENT_SERVICE_REQ, 5000)
-	#inst.discard_events(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE)
-	#inst.wait_for_srq()
-	time.sleep(0.3)
-	stb = inst.read_stb()
-	msg =  "SRQ not set after 0.5 seconds, was {:02x}".format(stb)
-	assert (stb == 0x50),msg
-
-	assert (inst.read_stb() == 0x10), "SRQ set at second read!"
-	
-	rsp = inst.read()
-	assert(rsp == "123\r\n")
-
-def test_read_timeout():
-	inst.timeout = 500
-	# First read with no MAV
-	inst.read_stb()
-	assert (inst.read_stb() == 0)
-	inst.write("delay 500")
-	t0 = time.monotonic()
-	try:
-		rsp = inst.read()
-		assert(false), "Read should have resulted in timeout"
-	except visa.VisaIOError:
-		print("  Got expected exception")
-	t = time.monotonic() - t0
-	assert ((t*1000.0) > (inst.timeout - 300))
-	assert ((t*1000.0) < (inst.timeout + 300))
-	print(f"Delay was {t:0.3}")
-	# Response is still in queue, so send a clear (to be more helpful to the next test)
-	inst.clear()
-	time.sleep(0.3)
-	assert(0 ==  (inst.read_stb() & 0x10)), "MAV not reset after clear"
-
-def test_abort_in():
-	inst.timeout = 200
-	# First read with no MAV
-	inst.read_stb()
-	assert (inst.read_stb() == 0)
-	inst.write("delay 500")
-	inst.write("xxx")
-	t0 = time.monotonic()
-	try:
-		rsp = inst.read()
-		assert(false), "Read should have resulted in timeout"
-	except visa.VisaIOError:
-		print("  Got expected exception")
-	t = time.monotonic() - t0
-	assert ((t*1000.0) > (inst.timeout - 300))
-	assert ((t*1000.0) < (inst.timeout + 300))
-	print(f"  Delay was {t:0.3}")
-	# Response is still in queue, so send a clear (to be more helpful to the next test)
-	inst.timeout = 800
-	y = inst.read()
-	assert(y == "xxx\r\n")
-	
-def test_indicate():
-	# perform indicator pulse
-	usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM)
-	retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=64, request_value=0x0000, index=usb_iface, length=0x0001)
-	assert((retv[1] == visa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}"
-	
-	
-def test_multi_read():
-	old_chunk_size = inst.chunk_size
-	longstr = "0123456789abcdefghijklmnopqrstuvwxyz" * 10
-	timeout = 10
-	x = longstr[0:174]
-	inst.chunk_size = 50 # Seems chunk size only applies to read but not write
-	inst.write(x)
-	# I'm not sure how to request just the remaining bit using a max count... so just read it all.
-	y = inst.read()
-	assert (x + "\r\n" == y)
-	#inst.chunk_size = old_chunk_size
-	
-def test_stall_ep0():
-	usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM)
-	inst.read_stb()
-	# This is an invalid request, should create stall.
-	try:
-		retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=60, request_value=0x0000, index=usb_iface, length=0x0001)
-		assert false
-	except visa.VisaIOError:
-		pass
-	
-	assert (inst.read_stb() == 0)
-
-
-rm = visa.ResourceManager()
-reslist = rm.list_resources("USB?::?*::INSTR")
-print(reslist)
-
-if (len(reslist) == 0):
-    sys.exit()
-	
-inst = rm.open_resource(reslist[0]);
-inst.timeout = 3000
-
-inst.clear()
-
-print("+ IDN")
-test_idn()
-
-print("+test abort in")
-test_abort_in()
-
-
-inst.timeout = 2000
-
-print("+ multi read")
-test_multi_read()
-
-
-print("+ echo delay=0")
-inst.write("delay 0")
-test_echo(1,175)
-
-print("+ echo delay=2")
-inst.write("delay 2")
-test_echo(1,175)
-
-print("+ echo delay=150")
-inst.write("delay 150")
-test_echo(53,76)
-test_echo(165,170)
-
-print("+ Read timeout (no MAV)")
-test_read_timeout()
-
-print("+ Test EP0 stall recovery")
-test_stall_ep0()
-
-print("+ MAV")
-test_mav()
-
-print("+ SRQ")
-test_srq()
-
-print("+ indicate")
-test_indicate()
-
-print("+ TRIG")
-test_trig()
-
-# Untested:
-#  abort bulk out
-#  LLO, GTL, etc
-#  Throughput rate?
-#  Transmitting a message using multiple transfers
-
-inst.close()
-print("Test complete")
diff --git a/tinyusb/examples/device/webusb_serial/CMakeLists.txt b/tinyusb/examples/device/webusb_serial/CMakeLists.txt
deleted file mode 100755
index abc4d91d..00000000
--- a/tinyusb/examples/device/webusb_serial/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/device/webusb_serial/Makefile b/tinyusb/examples/device/webusb_serial/Makefile
deleted file mode 100755
index 5a455078..00000000
--- a/tinyusb/examples/device/webusb_serial/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-  src \
-  $(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../rules.mk
diff --git a/tinyusb/examples/device/webusb_serial/src/main.c b/tinyusb/examples/device/webusb_serial/src/main.c
deleted file mode 100755
index aba4aedf..00000000
--- a/tinyusb/examples/device/webusb_serial/src/main.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-/* This example demonstrates WebUSB as web serial with browser with WebUSB support (e.g Chrome).
- * After enumerated successfully, browser will pop-up notification
- * with URL to landing page, click on it to test
- *  - Click "Connect" and select device, When connected the on-board LED will litted up.
- *  - Any charters received from either webusb/Serial will be echo back to webusb and Serial
- *
- * Note:
- * - The WebUSB landing page notification is currently disabled in Chrome
- * on Windows due to Chromium issue 656702 (https://crbug.com/656702). You have to
- * go to landing page (below) to test
- *
- * - On Windows 7 and prior: You need to use Zadig tool to manually bind the
- * WebUSB interface with the WinUSB driver for Chrome to access. From windows 8 and 10, this
- * is done automatically by firmware.
- *
- * - On Linux/macOS, udev permission may need to be updated by
- *   - copying '/examples/device/99-tinyusb.rules' file to /etc/udev/rules.d/ then
- *   - run 'sudo udevadm control --reload-rules && sudo udevadm trigger'
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-/* Blink pattern
- * - 250 ms  : device not mounted
- * - 1000 ms : device mounted
- * - 2500 ms : device is suspended
- */
-enum  {
-  BLINK_NOT_MOUNTED = 250,
-  BLINK_MOUNTED     = 1000,
-  BLINK_SUSPENDED   = 2500,
-
-  BLINK_ALWAYS_ON   = UINT32_MAX,
-  BLINK_ALWAYS_OFF  = 0
-};
-
-static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
-
-#define URL  "example.tinyusb.org/webusb-serial/"
-
-const tusb_desc_webusb_url_t desc_url =
-{
-  .bLength         = 3 + sizeof(URL) - 1,
-  .bDescriptorType = 3, // WEBUSB URL type
-  .bScheme         = 1, // 0: http, 1: https
-  .url             = URL
-};
-
-static bool web_serial_connected = false;
-
-//------------- prototypes -------------//
-void led_blinking_task(void);
-void cdc_task(void);
-void webserial_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  tusb_init();
-
-  while (1)
-  {
-    tud_task(); // tinyusb device task
-    cdc_task();
-    webserial_task();
-    led_blinking_task();
-  }
-
-  return 0;
-}
-
-// send characters to both CDC and WebUSB
-void echo_all(uint8_t buf[], uint32_t count)
-{
-  // echo to web serial
-  if ( web_serial_connected )
-  {
-    tud_vendor_write(buf, count);
-  }
-
-  // echo to cdc
-  if ( tud_cdc_connected() )
-  {
-    for(uint32_t i=0; i<count; i++)
-    {
-      tud_cdc_write_char(buf[i]);
-
-      if ( buf[i] == '\r' ) tud_cdc_write_char('\n');
-    }
-    tud_cdc_write_flush();
-  }
-}
-
-//--------------------------------------------------------------------+
-// Device callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device is mounted
-void tud_mount_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-// Invoked when device is unmounted
-void tud_umount_cb(void)
-{
-  blink_interval_ms = BLINK_NOT_MOUNTED;
-}
-
-// Invoked when usb bus is suspended
-// remote_wakeup_en : if host allow us  to perform remote wakeup
-// Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
-  (void) remote_wakeup_en;
-  blink_interval_ms = BLINK_SUSPENDED;
-}
-
-// Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
-  blink_interval_ms = BLINK_MOUNTED;
-}
-
-//--------------------------------------------------------------------+
-// WebUSB use vendor class
-//--------------------------------------------------------------------+
-
-// Invoked when a control transfer occurred on an interface of this class
-// Driver response accordingly to the request and the transfer stage (setup/data/ack)
-// return false to stall control endpoint (e.g unsupported request)
-bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request)
-{
-  // nothing to with DATA & ACK stage
-  if (stage != CONTROL_STAGE_SETUP) return true;
-
-  switch (request->bmRequestType_bit.type)
-  {
-    case TUSB_REQ_TYPE_VENDOR:
-      switch (request->bRequest)
-      {
-        case VENDOR_REQUEST_WEBUSB:
-          // match vendor request in BOS descriptor
-          // Get landing page url
-          return tud_control_xfer(rhport, request, (void*) &desc_url, desc_url.bLength);
-
-        case VENDOR_REQUEST_MICROSOFT:
-          if ( request->wIndex == 7 )
-          {
-            // Get Microsoft OS 2.0 compatible descriptor
-            uint16_t total_len;
-            memcpy(&total_len, desc_ms_os_20+8, 2);
-
-            return tud_control_xfer(rhport, request, (void*) desc_ms_os_20, total_len);
-          }else
-          {
-            return false;
-          }
-
-        default: break;
-      }
-    break;
-
-    case TUSB_REQ_TYPE_CLASS:
-      if (request->bRequest == 0x22)
-      {
-        // Webserial simulate the CDC_REQUEST_SET_CONTROL_LINE_STATE (0x22) to connect and disconnect.
-        web_serial_connected = (request->wValue != 0);
-
-        // Always lit LED if connected
-        if ( web_serial_connected )
-        {
-          board_led_write(true);
-          blink_interval_ms = BLINK_ALWAYS_ON;
-
-          tud_vendor_write_str("\r\nTinyUSB WebUSB device example\r\n");
-        }else
-        {
-          blink_interval_ms = BLINK_MOUNTED;
-        }
-
-        // response with status OK
-        return tud_control_status(rhport, request);
-      }
-    break;
-
-    default: break;
-  }
-
-  // stall unknown request
-  return false;
-}
-
-void webserial_task(void)
-{
-  if ( web_serial_connected )
-  {
-    if ( tud_vendor_available() )
-    {
-      uint8_t buf[64];
-      uint32_t count = tud_vendor_read(buf, sizeof(buf));
-
-      // echo back to both web serial and cdc
-      echo_all(buf, count);
-    }
-  }
-}
-
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-void cdc_task(void)
-{
-  if ( tud_cdc_connected() )
-  {
-    // connected and there are data available
-    if ( tud_cdc_available() )
-    {
-      uint8_t buf[64];
-
-      uint32_t count = tud_cdc_read(buf, sizeof(buf));
-
-      // echo back to both web serial and cdc
-      echo_all(buf, count);
-    }
-  }
-}
-
-// Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
-{
-  (void) itf;
-
-  // connected
-  if ( dtr && rts )
-  {
-    // print initial message when connected
-    tud_cdc_write_str("\r\nTinyUSB WebUSB device example\r\n");
-  }
-}
-
-// Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
-  (void) itf;
-}
-
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  static uint32_t start_ms = 0;
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
-  start_ms += blink_interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/device/webusb_serial/src/tusb_config.h b/tinyusb/examples/device/webusb_serial/src/tusb_config.h
deleted file mode 100755
index 26b81b38..00000000
--- a/tinyusb/examples/device/webusb_serial/src/tusb_config.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
-#endif
-
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC               1
-#define CFG_TUD_MSC               0
-#define CFG_TUD_HID               0
-#define CFG_TUD_MIDI              0
-#define CFG_TUD_VENDOR            1
-
-// CDC FIFO size of TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE    (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_CDC_TX_BUFSIZE    (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-// Vendor FIFO size of TX and RX
-// If not configured vendor endpoints will not be buffered
-#define CFG_TUD_VENDOR_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
-#define CFG_TUD_VENDOR_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/device/webusb_serial/src/usb_descriptors.c b/tinyusb/examples/device/webusb_serial/src/usb_descriptors.c
deleted file mode 100755
index d1539488..00000000
--- a/tinyusb/examples/device/webusb_serial/src/usb_descriptors.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-#include "usb_descriptors.h"
-
-/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
- * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
- *
- * Auto ProductID layout's Bitmap:
- *   [MSB]       MIDI | HID | MSC | CDC          [LSB]
- */
-#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
-#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
-                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
-    .bLength            = sizeof(tusb_desc_device_t),
-    .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0210, // at least 2.1 or 3.x for BOS & webUSB
-
-    // Use Interface Association Descriptor (IAD) for CDC
-    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
-    .bDeviceClass       = TUSB_CLASS_MISC,
-    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
-    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-    .idVendor           = 0xCafe,
-    .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
-
-    .iManufacturer      = 0x01,
-    .iProduct           = 0x02,
-    .iSerialNumber      = 0x03,
-
-    .bNumConfigurations = 0x01
-};
-
-// Invoked when received GET DEVICE DESCRIPTOR
-// Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-enum
-{
-  ITF_NUM_CDC = 0,
-  ITF_NUM_CDC_DATA,
-  ITF_NUM_VENDOR,
-  ITF_NUM_TOTAL
-};
-
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_VENDOR_DESC_LEN)
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
-  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  #define EPNUM_CDC_IN     2
-  #define EPNUM_CDC_OUT    2
-  #define EPNUM_VENDOR_IN  5
-  #define EPNUM_VENDOR_OUT 5
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
-  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
-  //    e.g EP1 OUT & EP1 IN cannot exist together
-  #define EPNUM_CDC_IN     2
-  #define EPNUM_CDC_OUT    3
-  #define EPNUM_VENDOR_IN  4
-  #define EPNUM_VENDOR_OUT 5
-#else
-  #define EPNUM_CDC_IN     2
-  #define EPNUM_CDC_OUT    2
-  #define EPNUM_VENDOR_IN  3
-  #define EPNUM_VENDOR_OUT 3
-#endif
-
-uint8_t const desc_configuration[] =
-{
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
-
-  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC_OUT, 0x80 | EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
-
-  // Interface number, string index, EP Out & IN address, EP size
-  TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR_OUT, 0x80 | EPNUM_VENDOR_IN, TUD_OPT_HIGH_SPEED ? 512 : 64)
-};
-
-// Invoked when received GET CONFIGURATION DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
-  return desc_configuration;
-}
-
-//--------------------------------------------------------------------+
-// BOS Descriptor
-//--------------------------------------------------------------------+
-
-/* Microsoft OS 2.0 registry property descriptor
-Per MS requirements https://msdn.microsoft.com/en-us/library/windows/hardware/hh450799(v=vs.85).aspx
-device should create DeviceInterfaceGUIDs. It can be done by driver and
-in case of real PnP solution device should expose MS "Microsoft OS 2.0
-registry property descriptor". Such descriptor can insert any record
-into Windows registry per device/configuration/interface. In our case it
-will insert "DeviceInterfaceGUIDs" multistring property.
-
-GUID is freshly generated and should be OK to use.
-
-https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/
-(Section Microsoft OS compatibility descriptors)
-*/
-
-#define BOS_TOTAL_LEN      (TUD_BOS_DESC_LEN + TUD_BOS_WEBUSB_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN)
-
-#define MS_OS_20_DESC_LEN  0xB2
-
-// BOS Descriptor is required for webUSB
-uint8_t const desc_bos[] =
-{
-  // total length, number of device caps
-  TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 2),
-
-  // Vendor Code, iLandingPage
-  TUD_BOS_WEBUSB_DESCRIPTOR(VENDOR_REQUEST_WEBUSB, 1),
-
-  // Microsoft OS 2.0 descriptor
-  TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, VENDOR_REQUEST_MICROSOFT)
-};
-
-uint8_t const * tud_descriptor_bos_cb(void)
-{
-  return desc_bos;
-}
-
-
-uint8_t const desc_ms_os_20[] =
-{
-  // Set header: length, type, windows version, total length
-  U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN),
-
-  // Configuration subset header: length, type, configuration index, reserved, configuration total length
-  U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A),
-
-  // Function Subset header: length, type, first interface, reserved, subset length
-  U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_VENDOR, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08),
-
-  // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID
-  U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible
-
-  // MS OS 2.0 Registry property descriptor: length, type
-  U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY),
-  U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16
-  'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00,
-  'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00,
-  U16_TO_U8S_LE(0x0050), // wPropertyDataLength
-	//bPropertyData: “{975F44D9-0D08-43FD-8B3E-127CA8AFFF9D}”.
-  '{', 0x00, '9', 0x00, '7', 0x00, '5', 0x00, 'F', 0x00, '4', 0x00, '4', 0x00, 'D', 0x00, '9', 0x00, '-', 0x00,
-  '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00,
-  '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00,
-  '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size");
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-// array of pointer to string descriptors
-char const* string_desc_arr [] =
-{
-  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  "123456",                      // 3: Serials, should use chip ID
-  "TinyUSB CDC",                 // 4: CDC Interface
-  "TinyUSB WebUSB"               // 5: Vendor Interface
-};
-
-static uint16_t _desc_str[32];
-
-// Invoked when received GET STRING DESCRIPTOR request
-// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
-  (void) langid;
-
-  uint8_t chr_count;
-
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
-    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
-
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
-
-    const char* str = string_desc_arr[index];
-
-    // Cap at max char
-    chr_count = strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
-
-    // Convert ASCII string into UTF-16
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
-  }
-
-  // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
-
-  return _desc_str;
-}
diff --git a/tinyusb/examples/device/webusb_serial/src/usb_descriptors.h b/tinyusb/examples/device/webusb_serial/src/usb_descriptors.h
deleted file mode 100755
index 19f1ff3f..00000000
--- a/tinyusb/examples/device/webusb_serial/src/usb_descriptors.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_DESCRIPTORS_H_
-#define USB_DESCRIPTORS_H_
-
-enum
-{
-  VENDOR_REQUEST_WEBUSB = 1,
-  VENDOR_REQUEST_MICROSOFT = 2
-};
-
-extern uint8_t const desc_ms_os_20[];
-
-#endif /* USB_DESCRIPTORS_H_ */
diff --git a/tinyusb/examples/host/CMakeLists.txt b/tinyusb/examples/host/CMakeLists.txt
deleted file mode 100755
index f185ac4f..00000000
--- a/tinyusb/examples/host/CMakeLists.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
-
-project(tinyusb_host_examples)
-family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR})
-
-# family_add_subdirectory will filter what to actually add based on selected FAMILY
-family_add_subdirectory(cdc_msc_hid)
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC18XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC18XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC18XX
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC40XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC40XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC40XX
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC43XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC43XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_LPC43XX
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_RP2040 b/tinyusb/examples/host/cdc_msc_hid/.only.MCU_RP2040
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/.only.MCU_RP2040
+++ /dev/null
diff --git a/tinyusb/examples/host/cdc_msc_hid/CMakeLists.txt b/tinyusb/examples/host/cdc_msc_hid/CMakeLists.txt
deleted file mode 100755
index 0a99bc3a..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/CMakeLists.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/host/cdc_msc_hid/Makefile b/tinyusb/examples/host/cdc_msc_hid/Makefile
deleted file mode 100755
index 6a2b4d90..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-CFLAGS += -Wno-error=cast-align
-
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/host/usbh_control.c \
-	src/portable/ehci/ehci.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/transdimension/hcd_transdimension.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
diff --git a/tinyusb/examples/host/cdc_msc_hid/src/hid_app.c b/tinyusb/examples/host/cdc_msc_hid/src/hid_app.c
deleted file mode 100755
index 11437c2b..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/src/hid_app.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2021, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-// If your host terminal support ansi escape code such as TeraTerm
-// it can be use to simulate mouse cursor movement within terminal
-#define USE_ANSI_ESCAPE   0
-
-#define MAX_REPORT  4
-
-static uint8_t const keycode2ascii[128][2] =  { HID_KEYCODE_TO_ASCII };
-
-// Each HID instance can has multiple reports
-static struct
-{
-  uint8_t report_count;
-  tuh_hid_report_info_t report_info[MAX_REPORT];
-}hid_info[CFG_TUH_HID];
-
-static void process_kbd_report(hid_keyboard_report_t const *report);
-static void process_mouse_report(hid_mouse_report_t const * report);
-static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len);
-
-void hid_app_task(void)
-{
-  // nothing to do
-}
-
-//--------------------------------------------------------------------+
-// TinyUSB Callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device with hid interface is mounted
-// Report descriptor is also available for use. tuh_hid_parse_report_descriptor()
-// can be used to parse common/simple enough descriptor.
-// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped
-// therefore report_desc = NULL, desc_len = 0
-void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len)
-{
-  printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
-
-  // Interface protocol (hid_interface_protocol_enum_t)
-  const char* protocol_str[] = { "None", "Keyboard", "Mouse" };
-  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
-
-  printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]);
-
-  // By default host stack will use activate boot protocol on supported interface.
-  // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser)
-  if ( itf_protocol == HID_ITF_PROTOCOL_NONE )
-  {
-    hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, desc_report, desc_len);
-    printf("HID has %u reports \r\n", hid_info[instance].report_count);
-  }
-
-  // request to receive report
-  // tuh_hid_report_received_cb() will be invoked when report is available
-  if ( !tuh_hid_receive_report(dev_addr, instance) )
-  {
-    printf("Error: cannot request to receive report\r\n");
-  }
-}
-
-// Invoked when device with hid interface is un-mounted
-void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance)
-{
-  printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance);
-}
-
-// Invoked when received report from device via interrupt endpoint
-void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
-{
-  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
-
-  switch (itf_protocol)
-  {
-    case HID_ITF_PROTOCOL_KEYBOARD:
-      TU_LOG2("HID receive boot keyboard report\r\n");
-      process_kbd_report( (hid_keyboard_report_t const*) report );
-    break;
-
-    case HID_ITF_PROTOCOL_MOUSE:
-      TU_LOG2("HID receive boot mouse report\r\n");
-      process_mouse_report( (hid_mouse_report_t const*) report );
-    break;
-
-    default:
-      // Generic report requires matching ReportID and contents with previous parsed report info
-      process_generic_report(dev_addr, instance, report, len);
-    break;
-  }
-
-  // continue to request to receive report
-  if ( !tuh_hid_receive_report(dev_addr, instance) )
-  {
-    printf("Error: cannot request to receive report\r\n");
-  }
-}
-
-//--------------------------------------------------------------------+
-// Keyboard
-//--------------------------------------------------------------------+
-
-// look up new key in previous keys
-static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode)
-{
-  for(uint8_t i=0; i<6; i++)
-  {
-    if (report->keycode[i] == keycode)  return true;
-  }
-
-  return false;
-}
-
-static void process_kbd_report(hid_keyboard_report_t const *report)
-{
-  static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released
-
-  //------------- example code ignore control (non-printable) key affects -------------//
-  for(uint8_t i=0; i<6; i++)
-  {
-    if ( report->keycode[i] )
-    {
-      if ( find_key_in_report(&prev_report, report->keycode[i]) )
-      {
-        // exist in previous report means the current key is holding
-      }else
-      {
-        // not existed in previous report means the current key is pressed
-        bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
-        uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0];
-        putchar(ch);
-        if ( ch == '\r' ) putchar('\n'); // added new line for enter key
-
-        fflush(stdout); // flush right away, else nanolib will wait for newline
-      }
-    }
-    // TODO example skips key released
-  }
-
-  prev_report = *report;
-}
-
-//--------------------------------------------------------------------+
-// Mouse
-//--------------------------------------------------------------------+
-
-void cursor_movement(int8_t x, int8_t y, int8_t wheel)
-{
-#if USE_ANSI_ESCAPE
-  // Move X using ansi escape
-  if ( x < 0)
-  {
-    printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left
-  }else if ( x > 0)
-  {
-    printf(ANSI_CURSOR_FORWARD(%d), x); // move right
-  }
-
-  // Move Y using ansi escape
-  if ( y < 0)
-  {
-    printf(ANSI_CURSOR_UP(%d), (-y)); // move up
-  }else if ( y > 0)
-  {
-    printf(ANSI_CURSOR_DOWN(%d), y); // move down
-  }
-
-  // Scroll using ansi escape
-  if (wheel < 0)
-  {
-    printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up
-  }else if (wheel > 0)
-  {
-    printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down
-  }
-
-  printf("\r\n");
-#else
-  printf("(%d %d %d)\r\n", x, y, wheel);
-#endif
-}
-
-static void process_mouse_report(hid_mouse_report_t const * report)
-{
-  static hid_mouse_report_t prev_report = { 0 };
-
-  //------------- button state  -------------//
-  uint8_t button_changed_mask = report->buttons ^ prev_report.buttons;
-  if ( button_changed_mask & report->buttons)
-  {
-    printf(" %c%c%c ",
-       report->buttons & MOUSE_BUTTON_LEFT   ? 'L' : '-',
-       report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-',
-       report->buttons & MOUSE_BUTTON_RIGHT  ? 'R' : '-');
-  }
-
-  //------------- cursor movement -------------//
-  cursor_movement(report->x, report->y, report->wheel);
-}
-
-//--------------------------------------------------------------------+
-// Generic Report
-//--------------------------------------------------------------------+
-static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
-{
-  (void) dev_addr;
-
-  uint8_t const rpt_count = hid_info[instance].report_count;
-  tuh_hid_report_info_t* rpt_info_arr = hid_info[instance].report_info;
-  tuh_hid_report_info_t* rpt_info = NULL;
-
-  if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0)
-  {
-    // Simple report without report ID as 1st byte
-    rpt_info = &rpt_info_arr[0];
-  }else
-  {
-    // Composite report, 1st byte is report ID, data starts from 2nd byte
-    uint8_t const rpt_id = report[0];
-
-    // Find report id in the arrray
-    for(uint8_t i=0; i<rpt_count; i++)
-    {
-      if (rpt_id == rpt_info_arr[i].report_id )
-      {
-        rpt_info = &rpt_info_arr[i];
-        break;
-      }
-    }
-
-    report++;
-    len--;
-  }
-
-  if (!rpt_info)
-  {
-    printf("Couldn't find the report info for this report !\r\n");
-    return;
-  }
-
-  // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples:
-  // - Keyboard                     : Desktop, Keyboard
-  // - Mouse                        : Desktop, Mouse
-  // - Gamepad                      : Desktop, Gamepad
-  // - Consumer Control (Media Key) : Consumer, Consumer Control
-  // - System Control (Power key)   : Desktop, System Control
-  // - Generic (vendor)             : 0xFFxx, xx
-  if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP )
-  {
-    switch (rpt_info->usage)
-    {
-      case HID_USAGE_DESKTOP_KEYBOARD:
-        TU_LOG1("HID receive keyboard report\r\n");
-        // Assume keyboard follow boot report layout
-        process_kbd_report( (hid_keyboard_report_t const*) report );
-      break;
-
-      case HID_USAGE_DESKTOP_MOUSE:
-        TU_LOG1("HID receive mouse report\r\n");
-        // Assume mouse follow boot report layout
-        process_mouse_report( (hid_mouse_report_t const*) report );
-      break;
-
-      default: break;
-    }
-  }
-}
diff --git a/tinyusb/examples/host/cdc_msc_hid/src/main.c b/tinyusb/examples/host/cdc_msc_hid/src/main.c
deleted file mode 100755
index a14be05e..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/src/main.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-void led_blinking_task(void);
-
-extern void cdc_task(void);
-extern void hid_app_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  printf("TinyUSB Host CDC MSC HID Example\r\n");
-
-  tusb_init();
-
-  while (1)
-  {
-    // tinyusb host task
-    tuh_task();
-    led_blinking_task();
-
-#if CFG_TUH_CDC
-    cdc_task();
-#endif
-
-#if CFG_TUH_HID
-    hid_app_task();
-#endif
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-#if CFG_TUH_CDC
-CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 };
-
-void tuh_mount_cb(uint8_t dev_addr)
-{
-  // application set-up
-  printf("A device with address %d is mounted\r\n", dev_addr);
-
-  tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // schedule first transfer
-}
-
-void tuh_umount_cb(uint8_t dev_addr)
-{
-  // application tear-down
-  printf("A device with address %d is unmounted \r\n", dev_addr);
-}
-
-// invoked ISR context
-void tuh_cdc_xfer_isr(uint8_t dev_addr, xfer_result_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes)
-{
-  (void) event;
-  (void) pipe_id;
-  (void) xferred_bytes;
-
-  printf(serial_in_buffer);
-  tu_memclr(serial_in_buffer, sizeof(serial_in_buffer));
-
-  tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // waiting for next data
-}
-
-void cdc_task(void)
-{
-
-}
-
-#endif
-
-//--------------------------------------------------------------------+
-// TinyUSB Callbacks
-//--------------------------------------------------------------------+
-
-//--------------------------------------------------------------------+
-// Blinking Task
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  const uint32_t interval_ms = 1000;
-  static uint32_t start_ms = 0;
-
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
-  start_ms += interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/host/cdc_msc_hid/src/msc_app.c b/tinyusb/examples/host/cdc_msc_hid/src/msc_app.c
deleted file mode 100755
index 77a72052..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/src/msc_app.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "tusb.h"
-
-#if CFG_TUH_MSC
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-static scsi_inquiry_resp_t inquiry_resp;
-
-bool inquiry_complete_cb(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw)
-{
-  if (csw->status != 0)
-  {
-    printf("Inquiry failed\r\n");
-    return false;
-  }
-
-  // Print out Vendor ID, Product ID and Rev
-  printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev);
-
-  // Get capacity of device
-  uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun);
-  uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun);
-
-  printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size));
-  printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size);
-
-  return true;
-}
-
-//------------- IMPLEMENTATION -------------//
-void tuh_msc_mount_cb(uint8_t dev_addr)
-{
-  printf("A MassStorage device is mounted\r\n");
-
-  uint8_t const lun = 0;
-  tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb);
-//
-//  //------------- file system (only 1 LUN support) -------------//
-//  uint8_t phy_disk = dev_addr-1;
-//  disk_initialize(phy_disk);
-//
-//  if ( disk_is_ready(phy_disk) )
-//  {
-//    if ( f_mount(phy_disk, &fatfs[phy_disk]) != FR_OK )
-//    {
-//      puts("mount failed");
-//      return;
-//    }
-//
-//    f_chdrive(phy_disk); // change to newly mounted drive
-//    f_chdir("/"); // root as current dir
-//
-//    cli_init();
-//  }
-}
-
-void tuh_msc_umount_cb(uint8_t dev_addr)
-{
-  (void) dev_addr;
-  printf("A MassStorage device is unmounted\r\n");
-
-//  uint8_t phy_disk = dev_addr-1;
-//
-//  f_mount(phy_disk, NULL); // unmount disk
-//  disk_deinitialize(phy_disk);
-//
-//  if ( phy_disk == f_get_current_drive() )
-//  { // active drive is unplugged --> change to other drive
-//    for(uint8_t i=0; i<CFG_TUH_DEVICE_MAX; i++)
-//    {
-//      if ( disk_is_ready(i) )
-//      {
-//        f_chdrive(i);
-//        cli_init(); // refractor, rename
-//      }
-//    }
-//  }
-}
-
-#endif
diff --git a/tinyusb/examples/host/cdc_msc_hid/src/tusb_config.h b/tinyusb/examples/host/cdc_msc_hid/src/tusb_config.h
deleted file mode 100755
index bc6c68e5..00000000
--- a/tinyusb/examples/host/cdc_msc_hid/src/tusb_config.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
-#else
-  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// CONFIGURATION
-//--------------------------------------------------------------------
-
-// Size of buffer to hold descriptors and other data used for enumeration
-#define CFG_TUH_ENUMERATION_BUFSIZE 256
-
-#define CFG_TUH_HUB                 1
-#define CFG_TUH_CDC                 1
-#define CFG_TUH_HID                 4 // typical keyboard + mouse device can have 3-4 HID interfaces
-#define CFG_TUH_MSC                 1
-#define CFG_TUH_VENDOR              0
-
-// max device support (excluding hub device)
-#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports
-
-//------------- HID -------------//
-#define CFG_TUH_HID_EPIN_BUFSIZE    64
-#define CFG_TUH_HID_EPOUT_BUFSIZE   64
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC175X_6X b/tinyusb/examples/host/hid_controller/.only.MCU_LPC175X_6X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_LPC175X_6X
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC177X_8X b/tinyusb/examples/host/hid_controller/.only.MCU_LPC177X_8X
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_LPC177X_8X
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC18XX b/tinyusb/examples/host/hid_controller/.only.MCU_LPC18XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_LPC18XX
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC40XX b/tinyusb/examples/host/hid_controller/.only.MCU_LPC40XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_LPC40XX
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_LPC43XX b/tinyusb/examples/host/hid_controller/.only.MCU_LPC43XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_LPC43XX
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_MIMXRT10XX b/tinyusb/examples/host/hid_controller/.only.MCU_MIMXRT10XX
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_MIMXRT10XX
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/.only.MCU_RP2040 b/tinyusb/examples/host/hid_controller/.only.MCU_RP2040
deleted file mode 100755
index e69de29b..00000000
--- a/tinyusb/examples/host/hid_controller/.only.MCU_RP2040
+++ /dev/null
diff --git a/tinyusb/examples/host/hid_controller/CMakeLists.txt b/tinyusb/examples/host/hid_controller/CMakeLists.txt
deleted file mode 100755
index aaf8bc34..00000000
--- a/tinyusb/examples/host/hid_controller/CMakeLists.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-cmake_minimum_required(VERSION 3.5)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
-family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
-
-project(${PROJECT})
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
-
-add_executable(${PROJECT})
-
-# Example source
-target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        )
-
-# Example include
-target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
\ No newline at end of file
diff --git a/tinyusb/examples/host/hid_controller/Makefile b/tinyusb/examples/host/hid_controller/Makefile
deleted file mode 100755
index 6f59faee..00000000
--- a/tinyusb/examples/host/hid_controller/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-
-# Example source
-EXAMPLE_SOURCE += \
-	src/hid_app.c \
-	src/main.c
-	
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-CFLAGS += -Wno-error=cast-align
-
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/host/usbh_control.c \
-	src/portable/ehci/ehci.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/transdimension/hcd_transdimension.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
diff --git a/tinyusb/examples/host/hid_controller/src/hid_app.c b/tinyusb/examples/host/hid_controller/src/hid_app.c
deleted file mode 100755
index c61ce70f..00000000
--- a/tinyusb/examples/host/hid_controller/src/hid_app.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2021, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-/* From https://www.kernel.org/doc/html/latest/input/gamepad.html
-          ____________________________              __
-         / [__ZL__]          [__ZR__] \               |
-        / [__ TL __]        [__ TR __] \              | Front Triggers
-     __/________________________________\__         __|
-    /                                  _   \          |
-   /      /\           __             (N)   \         |
-  /       ||      __  |MO|  __     _       _ \        | Main Pad
- |    <===DP===> |SE|      |ST|   (W) -|- (E) |       |
-  \       ||    ___          ___       _     /        |
-  /\      \/   /   \        /   \     (S)   /\      __|
- /  \________ | LS  | ____ |  RS | ________/  \       |
-|         /  \ \___/ /    \ \___/ /  \         |      | Control Sticks
-|        /    \_____/      \_____/    \        |    __|
-|       /                              \       |
- \_____/                                \_____/
-
-     |________|______|    |______|___________|
-       D-Pad    Left       Right   Action Pad
-               Stick       Stick
-
-                 |_____________|
-                    Menu Pad
-
-  Most gamepads have the following features:
-  - Action-Pad 4 buttons in diamonds-shape (on the right side) NORTH, SOUTH, WEST and EAST.
-  - D-Pad (Direction-pad) 4 buttons (on the left side) that point up, down, left and right.
-  - Menu-Pad Different constellations, but most-times 2 buttons: SELECT - START.
-  - Analog-Sticks provide freely moveable sticks to control directions, Analog-sticks may also
-  provide a digital button if you press them.
-  - Triggers are located on the upper-side of the pad in vertical direction. The upper buttons
-  are normally named Left- and Right-Triggers, the lower buttons Z-Left and Z-Right.
-  - Rumble Many devices provide force-feedback features. But are mostly just simple rumble motors.
- */
-
-// Sony DS4 report layout detail https://www.psdevwiki.com/ps4/DS4-USB
-typedef struct TU_ATTR_PACKED
-{
-  uint8_t x, y, z, rz; // joystick
-
-  struct {
-    uint8_t dpad     : 4; // (hat format, 0x08 is released, 0=N, 1=NE, 2=E, 3=SE, 4=S, 5=SW, 6=W, 7=NW)
-    uint8_t square   : 1; // west
-    uint8_t cross    : 1; // south
-    uint8_t circle   : 1; // east
-    uint8_t triangle : 1; // north
-  };
-
-  struct {
-    uint8_t l1     : 1;
-    uint8_t r1     : 1;
-    uint8_t l2     : 1;
-    uint8_t r2     : 1;
-    uint8_t share  : 1;
-    uint8_t option : 1;
-    uint8_t l3     : 1;
-    uint8_t r3     : 1;
-  };
-
-  struct {
-    uint8_t ps      : 1; // playstation button
-    uint8_t tpad    : 1; // track pad click
-    uint8_t counter : 6; // +1 each report
-  };
-
-  // comment out since not used by this example
-  // uint8_t l2_trigger; // 0 released, 0xff fully pressed
-  // uint8_t r2_trigger; // as above
-
-  //  uint16_t timestamp;
-  //  uint8_t  battery;
-  //
-  //  int16_t gyro[3];  // x, y, z;
-  //  int16_t accel[3]; // x, y, z
-
-  // there is still lots more info
-
-} sony_ds4_report_t;
-
-// check if device is Sony DualShock 4
-static inline bool is_sony_ds4(uint8_t dev_addr)
-{
-  uint16_t vid, pid;
-  tuh_vid_pid_get(dev_addr, &vid, &pid);
-
-  return (vid == 0x054c && pid == 0x09cc);
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-void hid_app_task(void)
-{
-  // nothing to do
-}
-
-//--------------------------------------------------------------------+
-// TinyUSB Callbacks
-//--------------------------------------------------------------------+
-
-// Invoked when device with hid interface is mounted
-// Report descriptor is also available for use. tuh_hid_parse_report_descriptor()
-// can be used to parse common/simple enough descriptor.
-// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped
-// therefore report_desc = NULL, desc_len = 0
-void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len)
-{
-  uint16_t vid, pid;
-  tuh_vid_pid_get(dev_addr, &vid, &pid);
-
-  printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
-  printf("VID = %04x, PID = %04x\r\n", vid, pid);
-
-  // Sony DualShock 4 [CUH-ZCT2x]
-  if ( is_sony_ds4(dev_addr) )
-  {
-    // request to receive report
-    // tuh_hid_report_received_cb() will be invoked when report is available
-    if ( !tuh_hid_receive_report(dev_addr, instance) )
-    {
-      printf("Error: cannot request to receive report\r\n");
-    }
-  }
-}
-
-// Invoked when device with hid interface is un-mounted
-void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance)
-{
-  printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance);
-
-}
-
-// check if different than 2
-bool diff_than_2(uint8_t x, uint8_t y)
-{
-  return (x - y > 2) || (y - x > 2);
-}
-
-// check if 2 reports are different enough
-bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2)
-{
-  bool result;
-
-  // x, y, z, rz must different than 2 to be counted
-  result = diff_than_2(rpt1->x, rpt2->x) || diff_than_2(rpt1->y , rpt2->y ) ||
-           diff_than_2(rpt1->z, rpt2->z) || diff_than_2(rpt1->rz, rpt2->rz);
-
-  // check the reset with mem compare
-  result |= memcmp(&rpt1->rz + 1, &rpt2->rz + 1, sizeof(sony_ds4_report_t)-4);
-
-  return result;
-}
-
-void process_sony_ds4(uint8_t const* report, uint16_t len)
-{
-  const char* dpad_str[] = { "N", "NE", "E", "SE", "S", "SW", "W", "NW", "none" };
-
-  // previous report used to compare for changes
-  static sony_ds4_report_t prev_report = { 0 };
-
-  uint8_t const report_id = report[0];
-  report++;
-  len--;
-
-  // all buttons state is stored in ID 1
-  if (report_id == 1)
-  {
-    sony_ds4_report_t ds4_report;
-    memcpy(&ds4_report, report, sizeof(ds4_report));
-
-    // counter is +1, assign to make it easier to compare 2 report
-    prev_report.counter = ds4_report.counter;
-
-    // only print if changes since it is polled ~ 5ms
-    // Since count+1 after each report and  x, y, z, rz fluctuate within 1 or 2
-    // We need more than memcmp to check if report is different enough
-    if ( diff_report(&prev_report, &ds4_report) )
-    {
-      printf("(x, y, z, rz) = (%u, %u, %u, %u)\r\n", ds4_report.x, ds4_report.y, ds4_report.z, ds4_report.rz);
-      printf("DPad = %s ", dpad_str[ds4_report.dpad]);
-
-      if (ds4_report.square   ) printf("Square ");
-      if (ds4_report.cross    ) printf("Cross ");
-      if (ds4_report.circle   ) printf("Circle ");
-      if (ds4_report.triangle ) printf("Triangle ");
-
-      if (ds4_report.l1       ) printf("L1 ");
-      if (ds4_report.r1       ) printf("R1 ");
-      if (ds4_report.l2       ) printf("L2 ");
-      if (ds4_report.r2       ) printf("R2 ");
-
-      if (ds4_report.share    ) printf("Share ");
-      if (ds4_report.option   ) printf("Option ");
-      if (ds4_report.l3       ) printf("L3 ");
-      if (ds4_report.r3       ) printf("R3 ");
-
-      if (ds4_report.ps       ) printf("PS ");
-      if (ds4_report.tpad     ) printf("TPad ");
-
-      printf("\r\n");
-    }
-
-    prev_report = ds4_report;
-  }
-}
-
-// Invoked when received report from device via interrupt endpoint
-void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
-{
-  if ( is_sony_ds4(dev_addr) )
-  {
-    process_sony_ds4(report, len);
-  }
-
-  // continue to request to receive report
-  if ( !tuh_hid_receive_report(dev_addr, instance) )
-  {
-    printf("Error: cannot request to receive report\r\n");
-  }
-}
diff --git a/tinyusb/examples/host/hid_controller/src/main.c b/tinyusb/examples/host/hid_controller/src/main.c
deleted file mode 100755
index e13fa818..00000000
--- a/tinyusb/examples/host/hid_controller/src/main.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-/* This example current worked and tested with following controller
- * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc
- */
-
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-void led_blinking_task(void);
-
-extern void cdc_task(void);
-extern void hid_app_task(void);
-
-/*------------- MAIN -------------*/
-int main(void)
-{
-  board_init();
-
-  printf("TinyUSB Host HID Controller Example\r\n");
-
-  tusb_init();
-
-  while (1)
-  {
-    // tinyusb host task
-    tuh_task();
-    led_blinking_task();
-
-#if CFG_TUH_CDC
-    cdc_task();
-#endif
-
-#if CFG_TUH_HID
-    hid_app_task();
-#endif
-  }
-
-  return 0;
-}
-
-//--------------------------------------------------------------------+
-// TinyUSB Callbacks
-//--------------------------------------------------------------------+
-
-//--------------------------------------------------------------------+
-// Blinking Task
-//--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
-  const uint32_t interval_ms = 1000;
-  static uint32_t start_ms = 0;
-
-  static bool led_state = false;
-
-  // Blink every interval ms
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
-  start_ms += interval_ms;
-
-  board_led_write(led_state);
-  led_state = 1 - led_state; // toggle
-}
diff --git a/tinyusb/examples/host/hid_controller/src/tusb_config.h b/tinyusb/examples/host/hid_controller/src/tusb_config.h
deleted file mode 100755
index 74b471ae..00000000
--- a/tinyusb/examples/host/hid_controller/src/tusb_config.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
-#else
-  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
-#endif
-
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
-
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// CONFIGURATION
-//--------------------------------------------------------------------
-
-// Size of buffer to hold descriptors and other data used for enumeration
-#define CFG_TUH_ENUMERATION_BUFSIZE 256
-
-#define CFG_TUH_HUB                 0
-#define CFG_TUH_CDC                 0
-#define CFG_TUH_HID                 4 // typical keyboard + mouse device can have 3-4 HID interfaces
-#define CFG_TUH_MSC                 0
-#define CFG_TUH_VENDOR              0
-
-// max device support (excluding hub device)
-// 1 hub typically has 4 ports
-#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1)
-
-//------------- HID -------------//
-
-#define CFG_TUH_HID_EP_BUFSIZE      64
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/tinyusb/examples/make.mk b/tinyusb/examples/make.mk
deleted file mode 100755
index 9daf60e3..00000000
--- a/tinyusb/examples/make.mk
+++ /dev/null
@@ -1,132 +0,0 @@
-# ---------------------------------------
-# Common make definition for all examples
-# ---------------------------------------
-
-# Build directory
-BUILD := _build/$(BOARD)
-
-PROJECT := $(notdir $(CURDIR))
-BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR))
-
-# Handy check parameter function
-check_defined = \
-    $(strip $(foreach 1,$1, \
-    $(call __check_defined,$1,$(strip $(value 2)))))
-__check_defined = \
-    $(if $(value $1),, \
-    $(error Undefined make flag: $1$(if $2, ($2))))
-
-#-------------- Select the board to build for. ------------
-
-# Board without family
-ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),)
-BOARD_PATH := hw/bsp/$(BOARD)
-FAMILY :=
-endif
-
-# Board within family
-ifeq ($(BOARD_PATH),)
-  BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD)))
-  FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH)))
-  FAMILY_PATH = hw/bsp/$(FAMILY)
-endif
-
-ifeq ($(BOARD_PATH),)
-  $(info You must provide a BOARD parameter with 'BOARD=')
-  $(error Invalid BOARD specified)
-endif
-
-ifeq ($(FAMILY),)
-  include $(TOP)/hw/bsp/$(BOARD)/board.mk
-else
-  # Include Family and Board specific defs
-  include $(TOP)/$(FAMILY_PATH)/family.mk
-
-  SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c))
-endif
-
-# Fetch submodules depended by family
-fetch_submodule_if_empty = $(if $(wildcard $(TOP)/$1/*),,$(info $(shell git -C $(TOP) submodule update --init $1)))
-ifdef DEPS_SUBMODULES
-  $(foreach s,$(DEPS_SUBMODULES),$(call fetch_submodule_if_empty,$(s)))
-endif
-
-#-------------- Cross Compiler  ------------
-# Can be set by board, default to ARM GCC
-CROSS_COMPILE ?= arm-none-eabi-
-
-CC = $(CROSS_COMPILE)gcc
-CXX = $(CROSS_COMPILE)g++
-GDB = $(CROSS_COMPILE)gdb
-OBJCOPY = $(CROSS_COMPILE)objcopy
-SIZE = $(CROSS_COMPILE)size
-MKDIR = mkdir
-
-ifeq ($(CMDEXE),1)
-  CP = copy
-  RM = del
-else
-  SED = sed
-  CP = cp
-  RM = rm
-endif
-
-#-------------- Source files and compiler flags --------------
-
-# Include all source C in family & board folder
-SRC_C += hw/bsp/board.c
-SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c))
-
-INC   += $(TOP)/$(FAMILY_PATH)
-
-# Compiler Flags
-CFLAGS += \
-  -ggdb \
-  -fdata-sections \
-  -ffunction-sections \
-  -fsingle-precision-constant \
-  -fno-strict-aliasing \
-  -Wdouble-promotion \
-  -Wstrict-prototypes \
-  -Wstrict-overflow \
-  -Wall \
-  -Wextra \
-  -Werror \
-  -Wfatal-errors \
-  -Werror-implicit-function-declaration \
-  -Wfloat-equal \
-  -Wundef \
-  -Wshadow \
-  -Wwrite-strings \
-  -Wsign-compare \
-  -Wmissing-format-attribute \
-  -Wunreachable-code \
-  -Wcast-align \
-  -Wcast-function-type
-
-# Debugging/Optimization
-ifeq ($(DEBUG), 1)
-  CFLAGS += -Og
-else
-  CFLAGS += -Os
-endif
-
-# Log level is mapped to TUSB DEBUG option
-ifneq ($(LOG),)
-  CMAKE_DEFSYM +=	-DLOG=$(LOG)
-  CFLAGS += -DCFG_TUSB_DEBUG=$(LOG)
-endif
-
-# Logger: default is uart, can be set to rtt or swo
-ifneq ($(LOGGER),)
-	CMAKE_DEFSYM +=	-DLOGGER=$(LOGGER)
-endif
-
-ifeq ($(LOGGER),rtt)
-  CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
-  RTT_SRC = lib/SEGGER_RTT
-  INC   += $(TOP)/$(RTT_SRC)/RTT
-  SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT.c
-else ifeq ($(LOGGER),swo)
-  CFLAGS += -DLOGGER_SWO
-endif
diff --git a/tinyusb/examples/rules.mk b/tinyusb/examples/rules.mk
deleted file mode 100755
index 4fce468f..00000000
--- a/tinyusb/examples/rules.mk
+++ /dev/null
@@ -1,204 +0,0 @@
-# ---------------------------------------
-# Common make rules for all examples
-# ---------------------------------------
-
-# Set all as default goal
-.DEFAULT_GOAL := all
-
-# ESP32-SX and RP2040 has its own CMake build system
-ifneq ($(FAMILY),esp32s2)
-ifneq ($(FAMILY),esp32s3)
-ifneq ($(FAMILY),rp2040)
-# ---------------------------------------
-# GNU Make build system
-# ---------------------------------------
-
-# libc
-LIBS += -lgcc -lm -lnosys
-
-ifneq ($(BOARD), spresense)
-LIBS += -lc
-endif
-
-# TinyUSB Stack source
-SRC_C += \
-	src/tusb.c \
-	src/common/tusb_fifo.c \
-	src/device/usbd.c \
-	src/device/usbd_control.c \
-	src/class/audio/audio_device.c \
-	src/class/cdc/cdc_device.c \
-	src/class/dfu/dfu_device.c \
-	src/class/dfu/dfu_rt_device.c \
-	src/class/hid/hid_device.c \
-	src/class/midi/midi_device.c \
-	src/class/msc/msc_device.c \
-	src/class/net/net_device.c \
-	src/class/usbtmc/usbtmc_device.c \
-	src/class/vendor/vendor_device.c
-
-# TinyUSB stack include
-INC += $(TOP)/src
-
-CFLAGS += $(addprefix -I,$(INC))
-
-LDFLAGS += $(CFLAGS) -Wl,-T,$(TOP)/$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections
-ifneq ($(SKIP_NANOLIB), 1)
-LDFLAGS += -specs=nosys.specs -specs=nano.specs
-endif
-
-ASFLAGS += $(CFLAGS)
-
-# Assembly files can be name with upper case .S, convert it to .s
-SRC_S := $(SRC_S:.S=.s)
-
-# Due to GCC LTO bug https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966
-# assembly file should be placed first in linking order
-# '_asm' suffix is added to object of assembly file
-OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=_asm.o))
-OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o))
-
-# Verbose mode
-ifeq ("$(V)","1")
-$(info CFLAGS  $(CFLAGS) ) $(info )
-$(info LDFLAGS $(LDFLAGS)) $(info )
-$(info ASFLAGS $(ASFLAGS)) $(info )
-endif
-
-all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size
-
-uf2: $(BUILD)/$(PROJECT).uf2
-
-OBJ_DIRS = $(sort $(dir $(OBJ)))
-$(OBJ): | $(OBJ_DIRS)
-$(OBJ_DIRS):
-ifeq ($(CMDEXE),1)
-	@$(MKDIR) $(subst /,\,$@)
-else
-	@$(MKDIR) -p $@
-endif
-
-$(BUILD)/$(PROJECT).elf: $(OBJ)
-	@echo LINK $@
-	@$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
-
-$(BUILD)/$(PROJECT).bin: $(BUILD)/$(PROJECT).elf
-	@echo CREATE $@
-	@$(OBJCOPY) -O binary $^ $@
-
-$(BUILD)/$(PROJECT).hex: $(BUILD)/$(PROJECT).elf
-	@echo CREATE $@
-	@$(OBJCOPY) -O ihex $^ $@
-
-# UF2 generation, iMXRT need to strip to text only before conversion
-ifeq ($(FAMILY),imxrt)
-$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).elf
-	@echo CREATE $@
-	@$(OBJCOPY) -O ihex -R .flash_config -R .ivt $^ $(BUILD)/$(PROJECT)-textonly.hex
-	$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $(BUILD)/$(PROJECT)-textonly.hex
-else
-$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex
-	@echo CREATE $@
-	$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^
-endif
-
-copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2
-
-# We set vpath to point to the top of the tree so that the source files
-# can be located. By following this scheme, it allows a single build rule
-# to be used to compile all .c files.
-vpath %.c . $(TOP)
-$(BUILD)/obj/%.o: %.c
-	@echo CC $(notdir $@)
-	@$(CC) $(CFLAGS) -c -MD -o $@ $<
-
-# ASM sources lower case .s
-vpath %.s . $(TOP)
-$(BUILD)/obj/%_asm.o: %.s
-	@echo AS $(notdir $@)
-	@$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $<
-
-# ASM sources upper case .S
-vpath %.S . $(TOP)
-$(BUILD)/obj/%_asm.o: %.S
-	@echo AS $(notdir $@)
-	@$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $<
-
-size: $(BUILD)/$(PROJECT).elf
-	-@echo ''
-	@$(SIZE) $<
-	-@echo ''
-
-.PHONY: clean
-clean:
-ifeq ($(CMDEXE),1)
-	rd /S /Q $(subst /,\,$(BUILD))
-else
-	$(RM) -rf $(BUILD)
-endif
-
-endif
-endif
-endif # GNU Make
-
-# ---------------------------------------
-# Flash Targets
-# ---------------------------------------
-
-# Flash binary using Jlink
-ifeq ($(OS),Windows_NT)
-  JLINKEXE = JLink.exe
-else
-  JLINKEXE = JLinkExe
-endif
-
-JLINK_IF ?= swd
-
-# Flash using jlink
-flash-jlink: $(BUILD)/$(PROJECT).hex
-	@echo halt > $(BUILD)/$(BOARD).jlink
-	@echo r > $(BUILD)/$(BOARD).jlink
-	@echo loadfile $^ >> $(BUILD)/$(BOARD).jlink
-	@echo r >> $(BUILD)/$(BOARD).jlink
-	@echo go >> $(BUILD)/$(BOARD).jlink
-	@echo exit >> $(BUILD)/$(BOARD).jlink
-	$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
-
-# flash STM32 MCU using stlink with STM32 Cube Programmer CLI
-flash-stlink: $(BUILD)/$(PROJECT).elf
-	STM32_Programmer_CLI --connect port=swd --write $< --go
-
-# flash with pyocd
-flash-pyocd: $(BUILD)/$(PROJECT).hex
-	pyocd flash -t $(PYOCD_TARGET) $<
-	pyocd reset -t $(PYOCD_TARGET)
-
-# flash with Black Magic Probe
-
-# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules
-BMP ?= /dev/ttyBmpGdb
-
-flash-bmp: $(BUILD)/$(PROJECT).elf
-	$(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load  $<
-
-debug-bmp: $(BUILD)/$(PROJECT).elf
-	$(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $<
-
-#-------------- Artifacts --------------
-
-# Create binary directory
-$(BIN):
-	@$(MKDIR) -p $@
-
-# Copy binaries .elf, .bin, .hex, .uf2 to BIN for upload
-# due to large size of combined artifacts, only uf2 is uploaded for now
-copy-artifact: $(BIN)
-	@$(CP) $(BUILD)/$(PROJECT).uf2 $(BIN)
-	#@$(CP) $(BUILD)/$(PROJECT).bin $(BIN)
-	#@$(CP) $(BUILD)/$(PROJECT).hex $(BIN)
-	#@$(CP) $(BUILD)/$(PROJECT).elf $(BIN)
-
-# Print out the value of a make variable.
-# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile
-print-%:
-	@echo $* = $($*)