fix missing prototype warnings

5 files changed, 63 insertions, 63 deletions

diff --git a/apps/accelerometer-test/app.c b/apps/accelerometer-test/app.c
index bea00f6f..8bd6537e 100644
--- a/apps/accelerometer-test/app.c
+++ b/apps/accelerometer-test/app.c
@@ -11,13 +11,13 @@
 // Also note that this board has its INT1 pin wired to A1, which is not an external
 // wake pin. Future accelerometer boards will wire interrupt pins to A2 and A4.
 
-void cb_light_pressed() {
+void cb_light_pressed(void) {
 }
 
-void cb_mode_pressed() {
+void cb_mode_pressed(void) {
 }
 
-void cb_alarm_pressed() {
+void cb_alarm_pressed(void) {
 }
 
 uint8_t interrupts = 0;
@@ -25,11 +25,11 @@ uint8_t last_interrupts = 0;
 uint8_t ticks = 0;
 char buf[13] = {0};
 
-void cb_interrupt_1() {
+void cb_interrupt_1(void) {
     interrupts++;
 }
 
-void cb_tick() {
+void cb_tick(void) {
     if (++ticks == 30) {
         last_interrupts = interrupts;
         interrupts = 0;
@@ -37,7 +37,7 @@ void cb_tick() {
     }
 }
 
-void app_init() {
+void app_init(void) {
     gpio_set_pin_direction(A0, GPIO_DIRECTION_OUT);
     gpio_set_pin_function(A0, GPIO_PIN_FUNCTION_OFF);
     gpio_set_pin_level(A0, true);
@@ -64,19 +64,19 @@ void app_init() {
     watch_rtc_register_tick_callback(cb_tick);
 }
 
-void app_wake_from_backup() {
+void app_wake_from_backup(void) {
 }
 
-void app_setup() {
+void app_setup(void) {
 }
 
-void app_prepare_for_standby() {
+void app_prepare_for_standby(void) {
 }
 
-void app_wake_from_standby() {
+void app_wake_from_standby(void) {
 }
 
-bool app_loop() {
+bool app_loop(void) {
     sprintf(buf, "IN%2d%3d%3d", ticks, interrupts, last_interrupts);
     watch_display_string(buf, 0);
 
diff --git a/apps/beats-time/app.c b/apps/beats-time/app.c
index 5c68a3e8..3a8c2dac 100644
--- a/apps/beats-time/app.c
+++ b/apps/beats-time/app.c
@@ -26,19 +26,19 @@ typedef struct ApplicationState {
     uint8_t subsecond;      // a value from 0 to (BEAT_REFRESH_FREQUENCY - 1) indicating the fractional second
 } ApplicationState;
 
-void do_clock_mode();
-void do_beats_mode();
-void do_set_time_mode();
-void set_time_mode_handle_primary_button();
-void set_time_mode_handle_secondary_button();
+void do_clock_mode(void);
+void do_beats_mode(void);
+void do_set_time_mode(void);
+void set_time_mode_handle_primary_button(void);
+void set_time_mode_handle_secondary_button(void);
 
 float clock2beats(uint16_t, uint16_t, uint16_t, int16_t);
 
-void cb_light_pressed();
-void cb_mode_pressed();
-void cb_alarm_pressed();
-void cb_tick();
-void cb_fast_tick();
+void cb_light_pressed(void);
+void cb_mode_pressed(void);
+void cb_alarm_pressed(void);
+void cb_tick(void);
+void cb_fast_tick(void);
 
 ApplicationState application_state;
 char buf[16] = {0};
@@ -46,15 +46,15 @@ char buf[16] = {0};
 /**
  * @brief Zeroes out the application state struct.
  */
-void app_init() {
+void app_init(void) {
     memset(&application_state, 0, sizeof(application_state));
 }
 
-void app_wake_from_backup() {
+void app_wake_from_backup(void) {
     // This app does not support BACKUP mode.
 }
 
-void app_setup() {
+void app_setup(void) {
     watch_enable_external_interrupts();
     watch_register_interrupt_callback(BTN_MODE, cb_mode_pressed, INTERRUPT_TRIGGER_RISING);
     watch_register_interrupt_callback(BTN_LIGHT, cb_light_pressed, INTERRUPT_TRIGGER_RISING);
@@ -67,13 +67,13 @@ void app_setup() {
     watch_rtc_register_tick_callback(cb_tick);
 }
 
-void app_prepare_for_standby() {
+void app_prepare_for_standby(void) {
 }
 
-void app_wake_from_standby() {
+void app_wake_from_standby(void) {
 }
 
-void update_tick_frequency() {
+static void update_tick_frequency(void) {
     watch_rtc_disable_all_periodic_callbacks();
     if (application_state.mode == MODE_BEATS) {
         watch_rtc_register_periodic_callback(cb_fast_tick, BEAT_REFRESH_FREQUENCY);
@@ -82,7 +82,7 @@ void update_tick_frequency() {
     }
 }
 
-bool app_loop() {
+bool app_loop(void) {
     // play a beep if the mode has changed in response to a user's press of the MODE button
     if (application_state.mode_changed) {
         // low note for nonzero case, high note for return to clock
@@ -135,7 +135,7 @@ bool app_loop() {
     return true;
 }
 
-void do_clock_mode() {
+void do_clock_mode(void) {
     watch_date_time date_time = watch_rtc_get_date_time();
     const char months[12][3] = {"JA", "FE", "MR", "AR", "MA", "JN", "JL", "AU", "SE", "OC", "NO", "dE"};
 
@@ -146,7 +146,7 @@ void do_clock_mode() {
 
 }
 
-void do_beats_mode() {
+void do_beats_mode(void) {
     watch_clear_colon();
 
     watch_date_time date_time = watch_rtc_get_date_time();
@@ -168,7 +168,7 @@ float clock2beats(uint16_t hours, uint16_t minutes, uint16_t seconds, int16_t ut
     return beats;
 }
 
-void do_set_time_mode() {
+void do_set_time_mode(void) {
     watch_date_time date_time = watch_rtc_get_date_time();
 
     watch_display_string("          ", 0);
@@ -196,12 +196,12 @@ void do_set_time_mode() {
     watch_set_pixel(1, 12); // required for T in position 1
 }
 
-void set_time_mode_handle_primary_button() {
+void set_time_mode_handle_primary_button(void) {
     application_state.page++;
     if (application_state.page == 6) application_state.page = 0;
 }
 
-void set_time_mode_handle_secondary_button() {
+void set_time_mode_handle_secondary_button(void) {
     watch_date_time date_time = watch_rtc_get_date_time();
     const uint8_t days_in_month[12] = {31, 28, 31, 30, 31, 30, 30, 31, 30, 31, 30, 31};
 
@@ -234,14 +234,14 @@ void set_time_mode_handle_secondary_button() {
     watch_rtc_set_date_time(date_time);
 }
 
-void cb_mode_pressed() {
+void cb_mode_pressed(void) {
     application_state.mode = (application_state.mode + 1) % NUM_MODES;
     application_state.mode_changed = true;
     application_state.mode_ticks = 300;
     application_state.page = 0;
 }
 
-void cb_light_pressed() {
+void cb_light_pressed(void) {
     switch (application_state.mode) {
         case MODE_SET:
             set_time_mode_handle_secondary_button();
@@ -252,7 +252,7 @@ void cb_light_pressed() {
     }
 }
 
-void cb_alarm_pressed() {
+void cb_alarm_pressed(void) {
     switch (application_state.mode) {
         case MODE_SET:
             set_time_mode_handle_primary_button();
@@ -262,7 +262,7 @@ void cb_alarm_pressed() {
     }
 }
 
-void cb_tick() {
+void cb_tick(void) {
     if (application_state.light_ticks > 0) {
         application_state.light_ticks--;
     }
@@ -271,7 +271,7 @@ void cb_tick() {
     }
 }
 
-void cb_fast_tick() {
+void cb_fast_tick(void) {
     watch_date_time date_time = watch_rtc_get_date_time();
     if (date_time.unit.second != application_state.last_second) {
         application_state.last_second = date_time.unit.second;
diff --git a/apps/buzzer-test/app.c b/apps/buzzer-test/app.c
index 58158dff..65d2356c 100644
--- a/apps/buzzer-test/app.c
+++ b/apps/buzzer-test/app.c
@@ -9,18 +9,18 @@ typedef struct ApplicationState {
 ApplicationState application_state;
 
 
-void cb_alarm_pressed() {
+void cb_alarm_pressed(void) {
     application_state.play = true;
 }
 
-void app_init() {
+void app_init(void) {
     memset(&application_state, 0, sizeof(application_state));
 }
 
-void app_wake_from_backup() {
+void app_wake_from_backup(void) {
 }
 
-void app_setup() {
+void app_setup(void) {
     watch_register_extwake_callback(BTN_ALARM, cb_alarm_pressed, true);
 
     watch_enable_display();
@@ -28,14 +28,14 @@ void app_setup() {
     watch_enable_buzzer();
 }
 
-void app_prepare_for_standby() {
+void app_prepare_for_standby(void) {
     watch_display_string("  rains ", 2);
 }
 
-void app_wake_from_standby() {
+void app_wake_from_standby(void) {
 }
 
-bool app_loop() {
+bool app_loop(void) {
     if (application_state.play) {
         printf("Playing song...\n");
         const BuzzerNote rains[] = {
diff --git a/apps/spi-test/app.c b/apps/spi-test/app.c
index 3fba9386..6ddd2782 100644
--- a/apps/spi-test/app.c
+++ b/apps/spi-test/app.c
@@ -10,7 +10,7 @@
 struct io_descriptor *io;
 struct spi_m_sync_descriptor SPI_0;
 
-void app_init() {
+void app_init(void) {
     // SPI_0_CLOCK_init
     hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_CORE, CONF_GCLK_SERCOM3_CORE_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos));
     hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_SLOW, CONF_GCLK_SERCOM3_SLOW_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos));
@@ -39,21 +39,21 @@ void app_init() {
     spi_m_sync_enable(&SPI_0);
 }
 
-void app_wake_from_backup() {
+void app_wake_from_backup(void) {
 }
 
-void app_setup() {
+void app_setup(void) {
 }
 
-void app_prepare_for_standby() {
+void app_prepare_for_standby(void) {
 }
 
-void app_wake_from_standby() {
+void app_wake_from_standby(void) {
 }
 
 static uint8_t get_id_command[4] = {0x9F};
 
-bool app_loop() {
+bool app_loop(void) {
     watch_set_pin_level(A3, false);
     io_write(io, get_id_command, 1);
     uint8_t buf[3] = {0};
diff --git a/apps/starter-project/app.c b/apps/starter-project/app.c
index fa887bae..9a4ef4fe 100644
--- a/apps/starter-project/app.c
+++ b/apps/starter-project/app.c
@@ -31,9 +31,9 @@ ApplicationState application_state;
 //////////////////////////////////////////////////////////////////////////////////////////
 // This section defines the callbacks for our button press events (implemented at bottom).
 // Add any other callbacks you may need either here or in another file.
-void cb_light_pressed();
-void cb_mode_pressed();
-void cb_alarm_pressed();
+void cb_light_pressed(void);
+void cb_mode_pressed(void);
+void cb_alarm_pressed(void);
 
 
 //////////////////////////////////////////////////////////////////////////////////////////
@@ -46,7 +46,7 @@ void cb_alarm_pressed();
  * @brief the app_init function is called before anything else. Use it to set up any
  * internal data structures or application state required by your app.
  */
-void app_init() {
+void app_init(void) {
     memset(&application_state, 0, sizeof(application_state));
 }
 
@@ -57,7 +57,7 @@ void app_init() {
  *
  * @see watch_enter_deep_sleep()
  */
-void app_wake_from_backup() {
+void app_wake_from_backup(void) {
     // This app does not support BACKUP mode.
 }
 
@@ -76,7 +76,7 @@ void app_wake_from_backup() {
  * also wiped out the system RAM. Note that when this is called after waking from sleep,
  * the RTC will still be configured with the correct date and time.
  */
-void app_setup() {
+void app_setup(void) {
     watch_enable_leds();
     watch_enable_buzzer();
 
@@ -101,14 +101,14 @@ void app_setup() {
  * In STANDBY mode, most peripherals are shut down, and no code will run until the watch receives
  * an interrupt (generally either the 1Hz tick or a press on one of the buttons).
  */
-void app_prepare_for_standby() {
+void app_prepare_for_standby(void) {
 }
 
 /**
  * @brief the app_wake_from_standby function is called after the watch wakes from STANDBY mode,
  * but before your main app_loop.
  */
-void app_wake_from_standby() {
+void app_wake_from_standby(void) {
     application_state.wake_count++;
 }
 
@@ -116,7 +116,7 @@ void app_wake_from_standby() {
  * @brief the app_loop function is called once on app startup and then again each time the
  * watch exits STANDBY mode.
  */
-bool app_loop() {
+bool app_loop(void) {
     if (application_state.beep) {
         watch_buzzer_play_note(BUZZER_NOTE_C7, 50);
         application_state.beep = false;
@@ -178,7 +178,7 @@ bool app_loop() {
 //////////////////////////////////////////////////////////////////////////////////////////
 // Implementations for our callback functions. Replace these with whatever functionality
 // your app requires.
-void cb_light_pressed() {
+void cb_light_pressed(void) {
     // always turn the light off when the pin goes low
     if (watch_get_pin_level(BTN_LIGHT) == 0) {
         application_state.light_on = false;
@@ -188,11 +188,11 @@ void cb_light_pressed() {
     application_state.light_on = true;
 }
 
-void cb_mode_pressed() {
+void cb_mode_pressed(void) {
     application_state.mode = (application_state.mode + 1) % 2;
     application_state.beep = true;
 }
 
-void cb_alarm_pressed() {
+void cb_alarm_pressed(void) {
     application_state.enter_sleep_mode = true;
 }