use simple 8-bit counter for LED PWM

1 files changed, 0 insertions, 206 deletions

diff --git a/Smol Watch Project/My Project/Config/hpl_tc_config.h b/Smol Watch Project/My Project/Config/hpl_tc_config.h
deleted file mode 100644
index 61e5b1b6..00000000
--- a/Smol Watch Project/My Project/Config/hpl_tc_config.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/* Auto-generated config file hpl_tc_config.h */
-#ifndef HPL_TC_CONFIG_H
-#define HPL_TC_CONFIG_H
-
-// <<< Use Configuration Wizard in Context Menu >>>
-
-#include <peripheral_clk_config.h>
-
-#ifndef CONF_TC3_ENABLE
-#define CONF_TC3_ENABLE 1
-#endif
-
-// <h> Basic settings
-// <o> Prescaler
-// <0=> No division
-// <1=> Divide by 2
-// <2=> Divide by 4
-// <3=> Divide by 8
-// <4=> Divide by 16
-// <5=> Divide by 64
-// <6=> Divide by 256
-// <7=> Divide by 1024
-// <i> This defines the prescaler value
-// <id> tc_prescaler
-#ifndef CONF_TC3_PRESCALER
-#define CONF_TC3_PRESCALER 0
-#endif
-// </h>
-
-// <h> PWM Waveform Output settings
-// <o> Waveform Period Value (uS) <0x00-0xFFFFFFFF>
-// <i> The unit of this value is us.
-// <id> tc_arch_wave_per_val
-#ifndef CONF_TC3_WAVE_PER_VAL
-#define CONF_TC3_WAVE_PER_VAL 0x3e8
-#endif
-
-// <o> Waveform Duty Value (0.1%) <0x00-0x03E8>
-// <i> The unit of this value is 1/1000.
-// <id> tc_arch_wave_duty_val
-#ifndef CONF_TC3_WAVE_DUTY_VAL
-#define CONF_TC3_WAVE_DUTY_VAL 0x1f4
-#endif
-
-/* Caculate pwm ccx register value based on WAVE_PER_VAL and Waveform Duty Value */
-#if CONF_TC3_PRESCALER < TC_CTRLA_PRESCALER_DIV64_Val
-#define CONF_TC3_CC0                                                                                                   \
-	((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 1000000 / (1 << CONF_TC3_PRESCALER) - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-
-#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV64_Val
-#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 64000000 - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-
-#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV256_Val
-#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 256000000 - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-
-#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV1024_Val
-#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 1024000000 - 1))
-#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000)
-#endif
-
-// </h>
-
-// <h> Advanced settings
-// <y> Mode
-// <TC_CTRLA_MODE_COUNT16_Val"> Counter in 16-bit mode
-// <TC_CTRLA_MODE_COUNT32_Val"> Counter in 32-bit mode
-// <i> These bits mode
-// <id> tc_mode
-#ifndef CONF_TC3_MODE
-#define CONF_TC3_MODE TC_CTRLA_MODE_COUNT16_Val
-#endif
-
-/*  Unused in 16/32 bit PWM mode */
-#ifndef CONF_TC3_PER
-#define CONF_TC3_PER 0x32
-#endif
-
-// <y> Prescaler and Counter Synchronization Selection
-// <TC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK
-// <TC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock
-// <TC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter
-// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCx clock or on the next prescaled GCLK_TCx clock.
-// <id> tc_arch_presync
-#ifndef CONF_TC3_PRESCSYNC
-#define CONF_TC3_PRESCSYNC TC_CTRLA_PRESCSYNC_GCLK_Val
-#endif
-
-// <q> Run in standby
-// <i> Indicates whether the will continue running in standby sleep mode or not
-// <id> tc_arch_runstdby
-#ifndef CONF_TC3_RUNSTDBY
-#define CONF_TC3_RUNSTDBY 0
-#endif
-
-// <q> On-Demand
-// <i> Indicates whether the TC3's on-demand mode is on or not
-// <id> tc_arch_ondemand
-#ifndef CONF_TC3_ONDEMAND
-#define CONF_TC3_ONDEMAND 0
-#endif
-
-// <o> Auto Lock
-// <0x0=>The Lock Update bit is not affected on overflow/underflow and re-trigger event
-// <0x1=>The Lock Update bit is set on each overflow/underflow or re-trigger event
-// <id> tc_arch_alock
-#ifndef CONF_TC3_ALOCK
-#define CONF_TC3_ALOCK 0
-#endif
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_CAPTEN0 0
-//#define CONF_TC3_CAPTEN1 0
-//#define CONF_TC3_COPEN0  0
-//#define CONF_TC3_COPEN1  0
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_DIR     0
-//#define CONF_TC3_ONESHOT 0
-//#define CONF_TC3_LUPD    0
-
-// <q> Debug Running Mode
-// <i> Indicates whether the Debug Running Mode is enabled or not
-// <id> tc_arch_dbgrun
-#ifndef CONF_TC3_DBGRUN
-#define CONF_TC3_DBGRUN 0
-#endif
-
-// <e> Event control
-// <id> timer_event_control
-#ifndef CONF_TC3_EVENT_CONTROL_ENABLE
-#define CONF_TC3_EVENT_CONTROL_ENABLE 0
-#endif
-
-// <q> Output Event On Match or Capture on Channel 0
-// <i> Enable output of event on timer tick
-// <id> tc_arch_mceo0
-#ifndef CONF_TC3_MCEO0
-#define CONF_TC3_MCEO0 0
-#endif
-
-// <q> Output Event On Match or Capture on Channel 1
-// <i> Enable output of event on timer tick
-// <id> tc_arch_mceo1
-#ifndef CONF_TC3_MCEO1
-#define CONF_TC3_MCEO1 0
-#endif
-
-// <q> Output Event On Timer Tick
-// <i> Enable output of event on timer tick
-// <id> tc_arch_ovfeo
-#ifndef CONF_TC3_OVFEO
-#define CONF_TC3_OVFEO 0
-#endif
-
-// <q> Event Input
-// <i> Enable asynchronous input events
-// <id> tc_arch_tcei
-#ifndef CONF_TC3_TCEI
-#define CONF_TC3_TCEI 0
-#endif
-
-// <q> Inverted Event Input
-// <i> Invert the asynchronous input events
-// <id> tc_arch_tcinv
-#ifndef CONF_TC3_TCINV
-#define CONF_TC3_TCINV 0
-#endif
-
-// <o> Event action
-// <0=> Event action disabled
-// <1=> Start, restart or re-trigger TC on event
-// <2=> Count on event
-// <3=> Start on event
-// <4=> Time stamp capture
-// <5=> Period captured in CC0, pulse width in CC1
-// <6=> Period captured in CC1, pulse width in CC0
-// <7=> Pulse width capture
-// <i> Event which will be performed on an event
-//<id> tc_arch_evact
-#ifndef CONF_TC3_EVACT
-#define CONF_TC3_EVACT 0
-#endif
-// </e>
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_WAVEGEN   TC_CTRLA_WAVEGEN_MFRQ_Val
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_INVEN0 0
-//#define CONF_TC3_INVEN1 0
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_PERBUF 0
-
-/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */
-//#define CONF_TC3_CCBUF0 0
-//#define CONF_TC3_CCBUF1 0
-
-// </h>
-
-// <<< end of configuration section >>>
-
-#endif // HPL_TC_CONFIG_H