bring in all the atmel studio stuff

1 files changed, 89 insertions, 103 deletions

diff --git a/Sensor Watch Starter Project/include/instance/adc.h b/Sensor Watch Starter Project/include/instance/adc.h
index 418a3e93..593cf070 100755..100644
--- a/Sensor Watch Starter Project/include/instance/adc.h
+++ b/Sensor Watch Starter Project/include/instance/adc.h
@@ -1,103 +1,89 @@
-/**

- * \file

- *

- * \brief Instance description for ADC

- *

- * Copyright (c) 2015 Atmel Corporation. All rights reserved.

- *

- * \asf_license_start

- *

- * \page License

- *

- * Redistribution and use in source and binary forms, with or without

- * modification, are permitted provided that the following conditions are met:

- *

- * 1. Redistributions of source code must retain the above copyright notice,

- *    this list of conditions and the following disclaimer.

- *

- * 2. Redistributions in binary form must reproduce the above copyright notice,

- *    this list of conditions and the following disclaimer in the documentation

- *    and/or other materials provided with the distribution.

- *

- * 3. The name of Atmel may not be used to endorse or promote products derived

- *    from this software without specific prior written permission.

- *

- * 4. This software may only be redistributed and used in connection with an

- *    Atmel microcontroller product.

- *

- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED

- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR

- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

- * POSSIBILITY OF SUCH DAMAGE.

- *

- * \asf_license_stop

- *

- */

-

-#ifndef _SAML22_ADC_INSTANCE_

-#define _SAML22_ADC_INSTANCE_

-

-/* ========== Register definition for ADC peripheral ========== */

-#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))

-#define REG_ADC_CTRLA              (0x42003000U) /**< \brief (ADC) Control A */

-#define REG_ADC_CTRLB              (0x42003001U) /**< \brief (ADC) Control B */

-#define REG_ADC_REFCTRL            (0x42003002U) /**< \brief (ADC) Reference Control */

-#define REG_ADC_EVCTRL             (0x42003003U) /**< \brief (ADC) Event Control */

-#define REG_ADC_INTENCLR           (0x42003004U) /**< \brief (ADC) Interrupt Enable Clear */

-#define REG_ADC_INTENSET           (0x42003005U) /**< \brief (ADC) Interrupt Enable Set */

-#define REG_ADC_INTFLAG            (0x42003006U) /**< \brief (ADC) Interrupt Flag Status and Clear */

-#define REG_ADC_SEQSTATUS          (0x42003007U) /**< \brief (ADC) Sequence Status */

-#define REG_ADC_INPUTCTRL          (0x42003008U) /**< \brief (ADC) Input Control */

-#define REG_ADC_CTRLC              (0x4200300AU) /**< \brief (ADC) Control C */

-#define REG_ADC_AVGCTRL            (0x4200300CU) /**< \brief (ADC) Average Control */

-#define REG_ADC_SAMPCTRL           (0x4200300DU) /**< \brief (ADC) Sample Time Control */

-#define REG_ADC_WINLT              (0x4200300EU) /**< \brief (ADC) Window Monitor Lower Threshold */

-#define REG_ADC_WINUT              (0x42003010U) /**< \brief (ADC) Window Monitor Upper Threshold */

-#define REG_ADC_GAINCORR           (0x42003012U) /**< \brief (ADC) Gain Correction */

-#define REG_ADC_OFFSETCORR         (0x42003014U) /**< \brief (ADC) Offset Correction */

-#define REG_ADC_SWTRIG             (0x42003018U) /**< \brief (ADC) Software Trigger */

-#define REG_ADC_DBGCTRL            (0x4200301CU) /**< \brief (ADC) Debug Control */

-#define REG_ADC_SYNCBUSY           (0x42003020U) /**< \brief (ADC) Synchronization Busy */

-#define REG_ADC_RESULT             (0x42003024U) /**< \brief (ADC) Result */

-#define REG_ADC_SEQCTRL            (0x42003028U) /**< \brief (ADC) Sequence Control */

-#define REG_ADC_CALIB              (0x4200302CU) /**< \brief (ADC) Calibration */

-#else

-#define REG_ADC_CTRLA              (*(RwReg8 *)0x42003000U) /**< \brief (ADC) Control A */

-#define REG_ADC_CTRLB              (*(RwReg8 *)0x42003001U) /**< \brief (ADC) Control B */

-#define REG_ADC_REFCTRL            (*(RwReg8 *)0x42003002U) /**< \brief (ADC) Reference Control */

-#define REG_ADC_EVCTRL             (*(RwReg8 *)0x42003003U) /**< \brief (ADC) Event Control */

-#define REG_ADC_INTENCLR           (*(RwReg8 *)0x42003004U) /**< \brief (ADC) Interrupt Enable Clear */

-#define REG_ADC_INTENSET           (*(RwReg8 *)0x42003005U) /**< \brief (ADC) Interrupt Enable Set */

-#define REG_ADC_INTFLAG            (*(RwReg8 *)0x42003006U) /**< \brief (ADC) Interrupt Flag Status and Clear */

-#define REG_ADC_SEQSTATUS          (*(RoReg8 *)0x42003007U) /**< \brief (ADC) Sequence Status */

-#define REG_ADC_INPUTCTRL          (*(RwReg16*)0x42003008U) /**< \brief (ADC) Input Control */

-#define REG_ADC_CTRLC              (*(RwReg16*)0x4200300AU) /**< \brief (ADC) Control C */

-#define REG_ADC_AVGCTRL            (*(RwReg8 *)0x4200300CU) /**< \brief (ADC) Average Control */

-#define REG_ADC_SAMPCTRL           (*(RwReg8 *)0x4200300DU) /**< \brief (ADC) Sample Time Control */

-#define REG_ADC_WINLT              (*(RwReg16*)0x4200300EU) /**< \brief (ADC) Window Monitor Lower Threshold */

-#define REG_ADC_WINUT              (*(RwReg16*)0x42003010U) /**< \brief (ADC) Window Monitor Upper Threshold */

-#define REG_ADC_GAINCORR           (*(RwReg16*)0x42003012U) /**< \brief (ADC) Gain Correction */

-#define REG_ADC_OFFSETCORR         (*(RwReg16*)0x42003014U) /**< \brief (ADC) Offset Correction */

-#define REG_ADC_SWTRIG             (*(RwReg8 *)0x42003018U) /**< \brief (ADC) Software Trigger */

-#define REG_ADC_DBGCTRL            (*(RwReg8 *)0x4200301CU) /**< \brief (ADC) Debug Control */

-#define REG_ADC_SYNCBUSY           (*(RoReg16*)0x42003020U) /**< \brief (ADC) Synchronization Busy */

-#define REG_ADC_RESULT             (*(RoReg16*)0x42003024U) /**< \brief (ADC) Result */

-#define REG_ADC_SEQCTRL            (*(RwReg  *)0x42003028U) /**< \brief (ADC) Sequence Control */

-#define REG_ADC_CALIB              (*(RwReg16*)0x4200302CU) /**< \brief (ADC) Calibration */

-#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

-

-/* ========== Instance parameters for ADC peripheral ========== */

-#define ADC_DMAC_ID_RESRDY          31       // index of DMA RESRDY trigger

-#define ADC_EXTCHANNEL_MSB          19       // Number of external channels

-#define ADC_GCLK_ID                 25       // index of Generic Clock

-#define ADC_INT_CH30                2        // Select OPAMP or CTAT on Channel 30

-#define ADC_MASTER_SLAVE_MODE       0        // ADC Master/Slave Mode

-

-#endif /* _SAML22_ADC_INSTANCE_ */

+/**
+ * \file
+ *
+ * \brief Instance description for ADC
+ *
+ * Copyright (c) 2018 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ * 
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAML22_ADC_INSTANCE_
+#define _SAML22_ADC_INSTANCE_
+
+/* ========== Register definition for ADC peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_ADC_CTRLA              (0x42003000) /**< \brief (ADC) Control A */
+#define REG_ADC_CTRLB              (0x42003001) /**< \brief (ADC) Control B */
+#define REG_ADC_REFCTRL            (0x42003002) /**< \brief (ADC) Reference Control */
+#define REG_ADC_EVCTRL             (0x42003003) /**< \brief (ADC) Event Control */
+#define REG_ADC_INTENCLR           (0x42003004) /**< \brief (ADC) Interrupt Enable Clear */
+#define REG_ADC_INTENSET           (0x42003005) /**< \brief (ADC) Interrupt Enable Set */
+#define REG_ADC_INTFLAG            (0x42003006) /**< \brief (ADC) Interrupt Flag Status and Clear */
+#define REG_ADC_SEQSTATUS          (0x42003007) /**< \brief (ADC) Sequence Status */
+#define REG_ADC_INPUTCTRL          (0x42003008) /**< \brief (ADC) Input Control */
+#define REG_ADC_CTRLC              (0x4200300A) /**< \brief (ADC) Control C */
+#define REG_ADC_AVGCTRL            (0x4200300C) /**< \brief (ADC) Average Control */
+#define REG_ADC_SAMPCTRL           (0x4200300D) /**< \brief (ADC) Sample Time Control */
+#define REG_ADC_WINLT              (0x4200300E) /**< \brief (ADC) Window Monitor Lower Threshold */
+#define REG_ADC_WINUT              (0x42003010) /**< \brief (ADC) Window Monitor Upper Threshold */
+#define REG_ADC_GAINCORR           (0x42003012) /**< \brief (ADC) Gain Correction */
+#define REG_ADC_OFFSETCORR         (0x42003014) /**< \brief (ADC) Offset Correction */
+#define REG_ADC_SWTRIG             (0x42003018) /**< \brief (ADC) Software Trigger */
+#define REG_ADC_DBGCTRL            (0x4200301C) /**< \brief (ADC) Debug Control */
+#define REG_ADC_SYNCBUSY           (0x42003020) /**< \brief (ADC) Synchronization Busy */
+#define REG_ADC_RESULT             (0x42003024) /**< \brief (ADC) Result */
+#define REG_ADC_SEQCTRL            (0x42003028) /**< \brief (ADC) Sequence Control */
+#define REG_ADC_CALIB              (0x4200302C) /**< \brief (ADC) Calibration */
+#else
+#define REG_ADC_CTRLA              (*(RwReg8 *)0x42003000UL) /**< \brief (ADC) Control A */
+#define REG_ADC_CTRLB              (*(RwReg8 *)0x42003001UL) /**< \brief (ADC) Control B */
+#define REG_ADC_REFCTRL            (*(RwReg8 *)0x42003002UL) /**< \brief (ADC) Reference Control */
+#define REG_ADC_EVCTRL             (*(RwReg8 *)0x42003003UL) /**< \brief (ADC) Event Control */
+#define REG_ADC_INTENCLR           (*(RwReg8 *)0x42003004UL) /**< \brief (ADC) Interrupt Enable Clear */
+#define REG_ADC_INTENSET           (*(RwReg8 *)0x42003005UL) /**< \brief (ADC) Interrupt Enable Set */
+#define REG_ADC_INTFLAG            (*(RwReg8 *)0x42003006UL) /**< \brief (ADC) Interrupt Flag Status and Clear */
+#define REG_ADC_SEQSTATUS          (*(RoReg8 *)0x42003007UL) /**< \brief (ADC) Sequence Status */
+#define REG_ADC_INPUTCTRL          (*(RwReg16*)0x42003008UL) /**< \brief (ADC) Input Control */
+#define REG_ADC_CTRLC              (*(RwReg16*)0x4200300AUL) /**< \brief (ADC) Control C */
+#define REG_ADC_AVGCTRL            (*(RwReg8 *)0x4200300CUL) /**< \brief (ADC) Average Control */
+#define REG_ADC_SAMPCTRL           (*(RwReg8 *)0x4200300DUL) /**< \brief (ADC) Sample Time Control */
+#define REG_ADC_WINLT              (*(RwReg16*)0x4200300EUL) /**< \brief (ADC) Window Monitor Lower Threshold */
+#define REG_ADC_WINUT              (*(RwReg16*)0x42003010UL) /**< \brief (ADC) Window Monitor Upper Threshold */
+#define REG_ADC_GAINCORR           (*(RwReg16*)0x42003012UL) /**< \brief (ADC) Gain Correction */
+#define REG_ADC_OFFSETCORR         (*(RwReg16*)0x42003014UL) /**< \brief (ADC) Offset Correction */
+#define REG_ADC_SWTRIG             (*(RwReg8 *)0x42003018UL) /**< \brief (ADC) Software Trigger */
+#define REG_ADC_DBGCTRL            (*(RwReg8 *)0x4200301CUL) /**< \brief (ADC) Debug Control */
+#define REG_ADC_SYNCBUSY           (*(RoReg16*)0x42003020UL) /**< \brief (ADC) Synchronization Busy */
+#define REG_ADC_RESULT             (*(RoReg16*)0x42003024UL) /**< \brief (ADC) Result */
+#define REG_ADC_SEQCTRL            (*(RwReg  *)0x42003028UL) /**< \brief (ADC) Sequence Control */
+#define REG_ADC_CALIB              (*(RwReg16*)0x4200302CUL) /**< \brief (ADC) Calibration */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for ADC peripheral ========== */
+#define ADC_DMAC_ID_RESRDY          31       // index of DMA RESRDY trigger
+#define ADC_EXTCHANNEL_MSB          19       // Number of external channels
+#define ADC_GCLK_ID                 25       // index of Generic Clock
+#define ADC_INT_CH30                2        // Select OPAMP or CTAT on Channel 30
+#define ADC_MASTER_SLAVE_MODE       0        // ADC Master/Slave Mode
+
+#endif /* _SAML22_ADC_INSTANCE_ */