path: root/target/linux/s3c24xx/patches-2.6.24/1033-smedia-glamo.patch.patch

From f9fc3f480aeb1fdfcdefdd3c560d06c8297c758b Mon Sep 17 00:00:00 2001
From: mokopatches <mokopatches@openmoko.org>
Date: Fri, 4 Apr 2008 11:34:54 +0100
Subject: [PATCH] smedia-glamo.patch
 [ FIXME:
  include/asm-arm/arch-s3c2410/irqs.h shouldn't contain device-specific
  changes. ]

This is a Linux kernel driver for the Smedia Glamo336x / Glamo337x
multi-function peripheral device.

Signed-off-by: Harald Welte <laforge@openmoko.org>
---
 drivers/mfd/Kconfig                 |    2 +
 drivers/mfd/Makefile                |    1 +
 drivers/mfd/glamo/Kconfig           |   35 ++
 drivers/mfd/glamo/Makefile          |   11 +
 drivers/mfd/glamo/glamo-core.c      | 1151 +++++++++++++++++++++++++++++++++++
 drivers/mfd/glamo/glamo-core.h      |   91 +++
 drivers/mfd/glamo/glamo-fb.c        |  822 +++++++++++++++++++++++++
 drivers/mfd/glamo/glamo-gpio.c      |   62 ++
 drivers/mfd/glamo/glamo-lcm-spi.c   |  241 ++++++++
 drivers/mfd/glamo/glamo-regs.h      |  477 +++++++++++++++
 drivers/mfd/glamo/glamo-spi-gpio.c  |  256 ++++++++
 include/asm-arm/arch-s3c2410/irqs.h |   32 +-
 include/linux/glamo-gpio.h          |   99 +++
 include/linux/glamofb.h             |   39 ++
 include/linux/spi/glamo.h           |   28 +
 15 files changed, 3345 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mfd/glamo/Kconfig
 create mode 100644 drivers/mfd/glamo/Makefile
 create mode 100644 drivers/mfd/glamo/glamo-core.c
 create mode 100644 drivers/mfd/glamo/glamo-core.h
 create mode 100644 drivers/mfd/glamo/glamo-fb.c
 create mode 100644 drivers/mfd/glamo/glamo-gpio.c
 create mode 100644 drivers/mfd/glamo/glamo-lcm-spi.c
 create mode 100644 drivers/mfd/glamo/glamo-regs.h
 create mode 100644 drivers/mfd/glamo/glamo-spi-gpio.c
 create mode 100644 include/linux/glamo-gpio.h
 create mode 100644 include/linux/glamofb.h
 create mode 100644 include/linux/spi/glamo.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2571619..fe06f8e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -15,6 +15,8 @@ config MFD_SM501
 	  interface. The device may be connected by PCI or local bus with
 	  varying functions enabled.
 
+source "drivers/mfd/glamo/Kconfig"
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5143209..a2da091 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
+obj-$(CONFIG_MFD_GLAMO)		+= glamo/
 
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
diff --git a/drivers/mfd/glamo/Kconfig b/drivers/mfd/glamo/Kconfig
new file mode 100644
index 0000000..b99f2b2
--- /dev/null
+++ b/drivers/mfd/glamo/Kconfig
@@ -0,0 +1,35 @@
+config MFD_GLAMO
+	bool "Smedia Glamo 336x/337x support"
+	help
+	  This enables the core driver for the Smedia Glamo 336x/337x
+	  multi-function device.  It includes irq_chip demultiplex as
+	  well as clock / power management and GPIO support.
+
+config MFD_GLAMO_FB
+	tristate "Smedia Glamo 336x/337x framebuffer support"
+	depends on FB && MFD_GLAMO
+	help
+	  Frame buffer driver for the LCD controller in the Smedia Glamo
+	  336x/337x.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called glamofb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+config MFD_GLAMO_SPI_GPIO
+       tristate "Glamo GPIO SPI bitbang support"
+       depends on MFD_GLAMO
+       help
+         Enable a bitbanging SPI adapter driver for the Smedia Glamo.
+
+config MFD_GLAMO_SPI_FB
+       tristate "Glamo LCM control channel SPI support"
+       depends on MFD_GLAMO_FB
+       help
+         Enable a bitbanging SPI adapter driver for the Smedia Glamo LCM
+	 control channel.  This SPI interface is frequently used to
+	 interconnect the LCM control interface.
+
diff --git a/drivers/mfd/glamo/Makefile b/drivers/mfd/glamo/Makefile
new file mode 100644
index 0000000..fb53982
--- /dev/null
+++ b/drivers/mfd/glamo/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Smedia Glamo framebuffer driver
+#
+
+obj-$(CONFIG_MFD_GLAMO)			+= glamo-core.o glamo-gpio.o
+obj-$(CONFIG_MFD_GLAMO_SPI)		+= glamo-spi.o
+obj-$(CONFIG_MFD_GLAMO_SPI_GPIO) 	+= glamo-spi-gpio.o
+
+obj-$(CONFIG_MFD_GLAMO_FB)		+= glamo-fb.o
+obj-$(CONFIG_MFD_GLAMO_SPI_FB)		+= glamo-lcm-spi.o
+
diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
new file mode 100644
index 0000000..acf545f
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-core.c
@@ -0,0 +1,1151 @@
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/glamofb.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
+
+static struct glamo_core *glamo_handle;
+
+static inline void __reg_write(struct glamo_core *glamo,
+				u_int16_t reg, u_int16_t val)
+{
+	writew(val, glamo->base + reg);
+}
+
+static inline u_int16_t __reg_read(struct glamo_core *glamo,
+				   u_int16_t reg)
+{
+	return readw(glamo->base + reg);
+}
+
+static void __reg_set_bit_mask(struct glamo_core *glamo,
+				u_int16_t reg, u_int16_t mask,
+				u_int16_t val)
+{
+	u_int16_t tmp;
+
+	val &= mask;
+
+	tmp = __reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	__reg_write(glamo, reg, tmp);
+}
+
+static void reg_set_bit_mask(struct glamo_core *glamo,
+				u_int16_t reg, u_int16_t mask,
+				u_int16_t val)
+{
+	spin_lock(&glamo->lock);
+	__reg_set_bit_mask(glamo, reg, mask, val);
+	spin_unlock(&glamo->lock);
+}
+
+static inline void __reg_set_bit(struct glamo_core *glamo,
+				 u_int16_t reg, u_int16_t bit)
+{
+	__reg_set_bit_mask(glamo, reg, bit, 0xffff);
+}
+
+static inline void __reg_clear_bit(struct glamo_core *glamo,
+				   u_int16_t reg, u_int16_t bit)
+{
+	__reg_set_bit_mask(glamo, reg, bit, 0);
+}
+
+static inline void glamo_vmem_write(struct glamo_core *glamo, u_int32_t addr,
+				    u_int16_t *src, int len)
+{
+	if (addr & 0x0001 || (unsigned long)src & 0x0001 || len & 0x0001) {
+		dev_err(&glamo->pdev->dev, "unaligned write(0x%08x, 0x%p, "
+			"0x%x)!!\n", addr, src, len);
+	}
+
+}
+
+static inline void glamo_vmem_read(struct glamo_core *glamo, u_int16_t *buf,
+				   u_int32_t addr, int len)
+{
+	if (addr & 0x0001 || (unsigned long) buf & 0x0001 || len & 0x0001) {
+		dev_err(&glamo->pdev->dev, "unaligned read(0x%p, 0x08%x, "
+			"0x%x)!!\n", buf, addr, len);
+	}
+
+
+}
+
+/***********************************************************************
+ * resources of sibling devices
+ ***********************************************************************/
+
+#if 0
+static struct resource glamo_core_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_GENERIC,
+		.end	= GLAMO_REGOFS_GENERIC + 0x400,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_core_dev = {
+	.name		= "glamo-core",
+	.resource	= &glamo_core_resources,
+	.num_resources	= ARRAY_SIZE(glamo_core_resources),
+};
+#endif
+
+static struct resource glamo_jpeg_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_JPEG,
+		.end	= GLAMO_REGOFS_MPEG - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GLAMO_JPEG,
+		.end	= IRQ_GLAMO_JPEG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_jpeg_dev = {
+	.name		= "glamo-jpeg",
+	.resource	= glamo_jpeg_resources,
+	.num_resources	= ARRAY_SIZE(glamo_jpeg_resources),
+};
+
+static struct resource glamo_mpeg_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_MPEG,
+		.end	= GLAMO_REGOFS_LCD - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GLAMO_MPEG,
+		.end	= IRQ_GLAMO_MPEG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_mpeg_dev = {
+	.name		= "glamo-mpeg",
+	.resource	= glamo_mpeg_resources,
+	.num_resources	= ARRAY_SIZE(glamo_mpeg_resources),
+};
+
+static struct resource glamo_2d_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_2D,
+		.end	= GLAMO_REGOFS_3D - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GLAMO_2D,
+		.end	= IRQ_GLAMO_2D,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device glamo_2d_dev = {
+	.name		= "glamo-2d",
+	.resource	= glamo_2d_resources,
+	.num_resources	= ARRAY_SIZE(glamo_2d_resources),
+};
+
+static struct resource glamo_3d_resources[] = {
+	{
+		.start	= GLAMO_REGOFS_3D,
+		.end	= GLAMO_REGOFS_END - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device glamo_3d_dev = {
+	.name		= "glamo-3d",
+	.resource	= glamo_3d_resources,
+	.num_resources	= ARRAY_SIZE(glamo_3d_resources),
+};
+
+static struct platform_device glamo_spigpio_dev = {
+	.name		= "glamo-spi-gpio",
+};
+
+static struct resource glamo_fb_resources[] = {
+	/* FIXME: those need to be incremented by parent base */
+	{
+		.name	= "glamo-fb-regs",
+		.start	= GLAMO_REGOFS_LCD,
+		.end	= GLAMO_REGOFS_MMC - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "glamo-fb-mem",
+		.start	= GLAMO_OFFSET_FB,
+		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device glamo_fb_dev = {
+	.name		= "glamo-fb",
+	.resource	= glamo_fb_resources,
+	.num_resources	= ARRAY_SIZE(glamo_fb_resources),
+};
+
+static struct resource glamo_mmc_resources[] = {
+	{
+		/* FIXME: those need to be incremented by parent base */
+		.start	= GLAMO_REGOFS_MMC,
+		.end	= GLAMO_REGOFS_MPROC0 - 1,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= IRQ_GLAMO_MMC,
+		.end	= IRQ_GLAMO_MMC,
+		.flags	= IORESOURCE_IRQ,
+	}, { /* our data buffer for MMC transfers */
+		.start	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
+		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
+				  GLAMO_MMC_BUFFER_SIZE - 1,
+		.flags	= IORESOURCE_MEM
+	},
+};
+
+static struct platform_device glamo_mmc_dev = {
+	.name		= "glamo-mci",
+	.resource	= glamo_mmc_resources,
+	.num_resources	= ARRAY_SIZE(glamo_mmc_resources),
+};
+
+struct glamo_mci_pdata glamo_mci_def_pdata = {
+	.gpio_detect		= 0,
+	.glamo_set_mci_power	= NULL, /* filled in from MFD platform data */
+	.ocr_avail		= MMC_VDD_32_33,
+	.glamo_irq_is_wired	= NULL, /* filled in from MFD platform data */
+};
+EXPORT_SYMBOL_GPL(glamo_mci_def_pdata);
+
+
+
+static void mangle_mem_resources(struct resource *res, int num_res,
+				 struct resource *parent)
+{
+	int i;
+
+	for (i = 0; i < num_res; i++) {
+		if (res[i].flags != IORESOURCE_MEM)
+			continue;
+		res[i].start += parent->start;
+		res[i].end += parent->start;
+		res[i].parent = parent;
+	}
+}
+
+/***********************************************************************
+ * IRQ demultiplexer
+ ***********************************************************************/
+#define irq2glamo(x)	(x - IRQ_GLAMO(0))
+
+static void glamo_ack_irq(unsigned int irq)
+{
+	/* clear interrupt source */
+	__reg_write(glamo_handle, GLAMO_REG_IRQ_CLEAR,
+		    1 << irq2glamo(irq));
+}
+
+static void glamo_mask_irq(unsigned int irq)
+{
+	u_int16_t tmp;
+
+	/* clear bit in enable register */
+	tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE);
+	tmp &= ~(1 << irq2glamo(irq));
+	__reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp);
+}
+
+static void glamo_unmask_irq(unsigned int irq)
+{
+	u_int16_t tmp;
+
+	/* set bit in enable register */
+	tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE);
+	tmp |= (1 << irq2glamo(irq));
+	__reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp);
+}
+
+static struct irq_chip glamo_irq_chip = {
+	.ack	= glamo_ack_irq,
+	.mask	= glamo_mask_irq,
+	.unmask	= glamo_unmask_irq,
+};
+
+static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	const unsigned int cpu = smp_processor_id();
+
+	spin_lock(&desc->lock);
+
+	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+	if (unlikely(desc->status & IRQ_INPROGRESS)) {
+		desc->status |= (IRQ_PENDING | IRQ_MASKED);
+		desc->chip->mask(irq);
+		desc->chip->ack(irq);
+		goto out_unlock;
+	}
+
+	kstat_cpu(cpu).irqs[irq]++;
+	desc->chip->ack(irq);
+	desc->status |= IRQ_INPROGRESS;
+
+	do {
+		u_int16_t irqstatus;
+		int i;
+
+		if (unlikely((desc->status &
+				(IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
+				(IRQ_PENDING | IRQ_MASKED))) {
+			/* dealing with pending IRQ, unmasking */
+			desc->chip->unmask(irq);
+			desc->status &= ~IRQ_MASKED;
+		}
+
+		desc->status &= ~IRQ_PENDING;
+
+		/* read IRQ status register */
+		irqstatus = __reg_read(glamo_handle, GLAMO_REG_IRQ_STATUS);
+		for (i = 0; i < 9; i++)
+			if (irqstatus & (1 << i))
+				desc_handle_irq(IRQ_GLAMO(i),
+				    irq_desc+IRQ_GLAMO(i));
+
+	} while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+	desc->status &= ~IRQ_INPROGRESS;
+
+out_unlock:
+	spin_unlock(&desc->lock);
+}
+
+/***********************************************************************
+ * 'engine' support
+ ***********************************************************************/
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	spin_lock(&glamo->lock);
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
+			    GLAMO_CLOCK_LCD_EN_M5CLK |
+			    GLAMO_CLOCK_LCD_EN_DHCLK |
+			    GLAMO_CLOCK_LCD_EN_DMCLK |
+			    GLAMO_CLOCK_LCD_EN_DCLK |
+			    GLAMO_CLOCK_LCD_DG_M5CLK |
+			    GLAMO_CLOCK_LCD_DG_DMCLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
+			    GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
+			    GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
+			    GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+			    GLAMO_HOSTBUS2_MMIO_EN_LCD,
+			    0xffff);
+		break;
+	case GLAMO_ENGINE_MMC:
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
+				   GLAMO_CLOCK_MMC_EN_M9CLK |
+				   GLAMO_CLOCK_MMC_EN_TCLK |
+				   GLAMO_CLOCK_MMC_DG_M9CLK |
+				   GLAMO_CLOCK_MMC_DG_TCLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_MMC,
+				   GLAMO_HOSTBUS2_MMIO_EN_MMC);
+		break;
+	case GLAMO_ENGINE_2D:
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
+				   GLAMO_CLOCK_2D_EN_M7CLK |
+				   GLAMO_CLOCK_2D_EN_GCLK |
+				   GLAMO_CLOCK_2D_DG_M7CLK |
+				   GLAMO_CLOCK_2D_DG_GCLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_2D,
+				   GLAMO_HOSTBUS2_MMIO_EN_2D);
+		break;
+	case GLAMO_ENGINE_CMDQ:
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
+				   GLAMO_CLOCK_2D_EN_M6CLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
+				   GLAMO_HOSTBUS2_MMIO_EN_CQ,
+				   GLAMO_HOSTBUS2_MMIO_EN_CQ);
+		break;
+	/* FIXME: Implementation */
+	default:
+		break;
+	}
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_enable);
+
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	spin_lock(&glamo->lock);
+	switch (engine) {
+	/* FIXME: Implementation */
+	default:
+		break;
+	}
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_disable);
+
+struct glamo_script reset_regs[] = {
+	[GLAMO_ENGINE_LCD] = {
+		GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
+	},
+#if 0
+	[GLAMO_ENGINE_HOST] = {
+		GLAMO_REG_CLOCK_HOST, GLAMO_CLOCK_HOST_RESET
+	},
+	[GLAMO_ENGINE_MEM] = {
+		GLAMO_REG_CLOCK_MEM, GLAMO_CLOCK_MEM_RESET
+	},
+#endif
+	[GLAMO_ENGINE_MMC] = {
+		GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
+	},
+	[GLAMO_ENGINE_2D] = {
+		GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
+	},
+	[GLAMO_ENGINE_JPEG] = {
+		GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
+	},
+};
+
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	struct glamo_script *rst;
+
+	if (engine >= ARRAY_SIZE(reset_regs)) {
+		dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
+		return;
+	}
+
+	rst = &reset_regs[engine];
+
+	spin_lock(&glamo->lock);
+	__reg_set_bit(glamo, rst->reg, rst->val);
+	spin_unlock(&glamo->lock);
+
+	msleep(1);
+
+	spin_lock(&glamo->lock);
+	__reg_clear_bit(glamo, rst->reg, rst->val);
+	spin_unlock(&glamo->lock);
+
+	msleep(1);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reset);
+
+enum glamo_pll {
+	GLAMO_PLL1,
+	GLAMO_PLL2,
+};
+
+static int glamo_pll_rate(struct glamo_core *glamo,
+			  enum glamo_pll pll)
+{
+	u_int16_t reg;
+	unsigned int div = 512;
+	/* FIXME: move osci into platform_data */
+	unsigned int osci = 32768;
+
+	if (osci == 32768)
+		div = 1;
+
+	switch (pll) {
+	case GLAMO_PLL1:
+		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
+		break;
+	case GLAMO_PLL2:
+		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return (osci/div)*reg;
+}
+
+int glamo_engine_reclock(struct glamo_core *glamo,
+			 enum glamo_engine engine,
+			 int ps)
+{
+	int pll, khz;
+	u_int16_t reg, mask, val = 0;
+
+	if (!ps)
+		return 0;
+
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+		pll = GLAMO_PLL1;
+		reg = GLAMO_REG_CLOCK_GEN7;
+		mask = 0xff;
+		break;
+	default:
+		dev_warn(&glamo->pdev->dev,
+			 "reclock of engine 0x%x not supported\n", engine);
+		return -EINVAL;
+		break;
+	}
+
+	pll = glamo_pll_rate(glamo, pll);
+	khz = 1000000000UL / ps;
+
+	if (khz)
+		val = (pll / khz) / 1000;
+
+	dev_dbg(&glamo->pdev->dev,
+			"PLL %d, kHZ %d, div %d\n", pll, khz, val);
+
+	if (val) {
+		val--;
+		reg_set_bit_mask(glamo, reg, mask, val);
+		msleep(5); /* wait some time to stabilize */
+
+		return 0;
+	} else {
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reclock);
+
+/***********************************************************************
+ * script support
+ ***********************************************************************/
+
+int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script,
+		     int len, int may_sleep)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		struct glamo_script *line = &script[i];
+
+		switch (line->reg) {
+		case 0xffff:
+			return 0;
+		case 0xfffe:
+			if (may_sleep)
+				msleep(line->val);
+			else
+				mdelay(line->val);
+			break;
+		case 0xfffd:
+			/* spin until PLLs lock */
+			while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3)
+				;
+			break;
+		default:
+			__reg_write(glamo, script[i].reg, script[i].val);
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(glamo_run_script);
+
+static struct glamo_script glamo_init_script[] = {
+	{ GLAMO_REG_CLOCK_HOST,		0x1000 },
+		{ 0xfffe, 2 },
+	{ GLAMO_REG_CLOCK_MEMORY, 	0x1000 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x2000 },
+	{ GLAMO_REG_CLOCK_LCD,		0x1000 },
+	{ GLAMO_REG_CLOCK_MMC,		0x1000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x1000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x3000 },
+	{ GLAMO_REG_CLOCK_JPEG,		0x1000 },
+	{ GLAMO_REG_CLOCK_3D,		0x1000 },
+	{ GLAMO_REG_CLOCK_3D,		0x3000 },
+	{ GLAMO_REG_CLOCK_2D,		0x1000 },
+	{ GLAMO_REG_CLOCK_2D,		0x3000 },
+	{ GLAMO_REG_CLOCK_RISC1,	0x1000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x3000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x3000 },
+	{ GLAMO_REG_CLOCK_MPROC,	0x1000 /*0x100f*/ },
+		{ 0xfffe, 2 },
+	{ GLAMO_REG_CLOCK_HOST,		0x0000 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x0000 },
+	{ GLAMO_REG_CLOCK_LCD,		0x0000 },
+	{ GLAMO_REG_CLOCK_MMC,		0x0000 },
+#if 0
+/* unused engines must be left in reset to stop MMC block read "blackouts" */
+	{ GLAMO_REG_CLOCK_ISP,		0x0000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x0000 },
+	{ GLAMO_REG_CLOCK_JPEG,		0x0000 },
+	{ GLAMO_REG_CLOCK_3D,		0x0000 },
+	{ GLAMO_REG_CLOCK_3D,		0x0000 },
+	{ GLAMO_REG_CLOCK_2D,		0x0000 },
+	{ GLAMO_REG_CLOCK_2D,		0x0000 },
+	{ GLAMO_REG_CLOCK_RISC1,	0x0000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x0000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x0000 },
+#endif
+	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
+	{ GLAMO_REG_PLL_GEN3,		0x09c3 },	/* 80MHz */
+		{ 0xfffd, 0 },
+	/*
+	 * b9 of this register MUST be zero to get any interrupts on INT#
+	 * the other set bits enable all the engine interrupt sources
+	 */
+	{ GLAMO_REG_IRQ_ENABLE,		0x01ff },
+	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
+	{ GLAMO_REG_CLOCK_GEN7,		0x0101 },
+	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
+	{ GLAMO_REG_CLOCK_HOST,		0x000d },
+	{ 0x200,	0x0ef0 },
+	{ 0x202, 	0x07ff },
+	{ 0x212,	0x0000 },
+	{ 0x214,	0x4000 },
+	{ 0x216,	0xf00e },
+	{ GLAMO_REG_MEM_TYPE,		0x0874 }, /* 8MB, 16 word pg wr+rd */
+	{ GLAMO_REG_MEM_GEN,		0xafaf }, /* 63 grants min + max */
+	/*
+	 * the register below originally 0x0108 makes unreliable Glamo MMC
+	 * write operations.  Cranked to 0x05ad to add a wait state, the
+	 * unreliability is not seen after 4GB of write / read testing
+	 */
+	{ GLAMO_REG_MEM_TIMING1,	0x0108 },
+	{ GLAMO_REG_MEM_TIMING2,	0x0010 }, /* Taa = 3 MCLK */
+	{ GLAMO_REG_MEM_TIMING3,	0x0000 },
+	{ GLAMO_REG_MEM_TIMING4,	0x0000 }, /* CE1# delay fall/rise */
+	{ GLAMO_REG_MEM_TIMING5,	0x0000 }, /* UB# LB# */
+	{ GLAMO_REG_MEM_TIMING6,	0x0000 }, /* OE# */
+	{ GLAMO_REG_MEM_TIMING7,	0x0000 }, /* WE# */
+	{ GLAMO_REG_MEM_TIMING8,	0x1002 }, /* MCLK delay, was 0x1000 */
+	{ GLAMO_REG_MEM_TIMING9,	0x6006 },
+	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
+	{ GLAMO_REG_MEM_TIMING11,	0x0001 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ GLAMO_REG_MEM_POWER2,		0x0000 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
+};
+
+static struct glamo_script glamo_resume_script[] = {
+	{ GLAMO_REG_IRQ_ENABLE,		0x01ff },
+	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
+	{ GLAMO_REG_CLOCK_GEN7,		0x0001 }, /* 0101 */
+	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
+	{ GLAMO_REG_CLOCK_HOST,		0x000d },
+	{ 0x200,	0x0ef0 },
+	{ 0x202, 	0x07ff },
+	{ 0x212,	0x0000 },
+	{ 0x214,	0x4000 },
+	{ 0x216,	0xf00e },
+	{ GLAMO_REG_MEM_TYPE,		0x0874 }, /* 8MB, 16 word pg wr+rd */
+	{ GLAMO_REG_MEM_GEN,		0xafaf }, /* 63 grants min + max */
+
+	{ GLAMO_REG_MEM_TIMING1,	0x0108 },
+	{ GLAMO_REG_MEM_TIMING2,	0x0010 }, /* Taa = 3 MCLK */
+	{ GLAMO_REG_MEM_TIMING3,	0x0000 },
+	{ GLAMO_REG_MEM_TIMING4,	0x0000 }, /* CE1# delay fall/rise */
+	{ GLAMO_REG_MEM_TIMING5,	0x0000 }, /* UB# LB# */
+	{ GLAMO_REG_MEM_TIMING6,	0x0000 }, /* OE# */
+	{ GLAMO_REG_MEM_TIMING7,	0x0000 }, /* WE# */
+	{ GLAMO_REG_MEM_TIMING8,	0x1002 }, /* MCLK delay, was 0x1000 */
+	{ GLAMO_REG_MEM_TIMING9,	0x6006 },
+	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
+	{ GLAMO_REG_MEM_TIMING11,	0x0001 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ GLAMO_REG_MEM_POWER2,		0x0000 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
+};
+
+#if 0 /* MM370 */
+static const struct glamo_script regs_vram_2mb = {
+	{ GLAMO_REG_CLOCK_MEMORY,	0x3aaa },
+		{ 0xfffe, 50 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x0aaa },
+		{ 0xfffe, 3 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ 0x033a,			0x0000 },
+	{ 0x033c,			0x0000 },
+	{ 0x033e,			0x0000 },
+	{ 0x0340,			0x0000 },
+	{ 0x0342,			0x0000 },
+	{ 0x0344,			0x0000 },
+	{ 0x0346,			0x0240 },
+	{ GLAMO_REG_MEM_TIMING8,	0x1016 },
+	{ GLAMO_REG_MEM_TIMING9,	0x6067 },
+	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
+	{ GLAMO_REG_MEM_TIMING11,	0x0030 },
+	{ GLAMO_REG_MEM_GEN,		0x3fff },
+	{ GLAMO_REG_MEM_GEN,		0xafaf },
+	{ GLAMO_REG_MEM_TIMING1,	0x0108 },
+	{ GLAMO_REG_MEM_TIMING2,	0x0010 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0a00 },
+		{ 0xfffe, 3 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe200 },
+		{ 0xfffe, 1 },
+};
+
+static const struct glamo_script regs_vram_8mb = {
+	{ GLAMO_REG_CLOCK_MEMORY,	0x3aaa },
+		{ 0xfffe, 50 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x0aaa },
+		{ 0xfffe, 3 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ 0x033a,			0x45cf },
+	{ 0x033c, 			0x4240 },
+	{ 0x033e,			0x53e0 },
+	{ 0x0340,			0x1401 },
+	{ 0x0342,			0x0c44 },
+	{ 0x0344,			0x1d0b },
+	{ 0x0346,			0x25ac },
+	{ 0x0348,			0x1953 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_TYPE,		0x087a },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_MEM_TIMING8,	0x1060 },
+	{ GLAMO_REG_MEM_TIMING9,	0x6067 },
+	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
+	{ GLAMO_REG_MEM_TIMING11,	0x0030 },
+	{ GLAMO_REG_MEM_GEN,		0x3fff },
+	{ GLAMO_REG_MEM_GEN,		0xafaf },
+	{ GLAMO_REG_MEM_TIMING1,	0x3108 },
+	{ GLAMO_REG_MEM_TIMING2,	0x0010 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0a00 },
+		{ 0xfffe, 3 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe200 },
+		{ 0xfffe, 1 },
+};
+#endif
+
+enum glamo_power {
+	GLAMO_POWER_ON,
+	GLAMO_POWER_STANDBY,
+	GLAMO_POWER_SUSPEND,
+};
+
+static void glamo_power(struct glamo_core *glamo,
+			enum glamo_power new_state)
+{
+	spin_lock(&glamo->lock);
+
+	switch (new_state) {
+	case GLAMO_POWER_ON:
+		/* power up PLL1 and PLL2 */
+		__reg_set_bit_mask(glamo, GLAMO_REG_DFT_GEN6, 0x0001, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 0x2000, 0x0000);
+
+		/* spin until PLL1 and PLL2 lock */
+		while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3)
+			;
+
+		/* enable memory clock and get it out of deep pwrdown */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MEMORY,
+				   GLAMO_CLOCK_MEM_EN_MOCACLK, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_MEM_DRAM2,
+				   GLAMO_MEM_DRAM2_DEEP_PWRDOWN, 0x0000);
+		__reg_set_bit_mask(glamo, GLAMO_REG_MEM_DRAM1,
+				   GLAMO_MEM_DRAM1_SELF_REFRESH, 0x0000);
+
+		glamo_run_script(glamo, glamo_resume_script,
+				 ARRAY_SIZE(glamo_resume_script), 0);
+
+		break;
+	case GLAMO_POWER_STANDBY:
+		/* enable memory self-refresh */
+		__reg_set_bit_mask(glamo, GLAMO_REG_MEM_DRAM1,
+				   GLAMO_MEM_DRAM1_SELF_REFRESH, 0xffff);
+		/* stop memory clock */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MEMORY,
+				   GLAMO_CLOCK_MEM_EN_MOCACLK, 0x0000);
+		/* power down PLL2 and then PLL1 */
+		__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 0x2000, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_DFT_GEN5, 0x0001, 0xffff);
+		break;
+	case GLAMO_POWER_SUSPEND:
+		__reg_set_bit_mask(glamo, GLAMO_REG_MEM_DRAM2,
+				   GLAMO_MEM_DRAM2_DEEP_PWRDOWN, 0xffff);
+		/* stop memory clock */
+		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MEMORY,
+				   GLAMO_CLOCK_MEM_EN_MOCACLK, 0x0000);
+		/* power down PLL2 and then PLL1 */
+		__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 0x2000, 0xffff);
+		__reg_set_bit_mask(glamo, GLAMO_REG_DFT_GEN5, 0x0001, 0xffff);
+		break;
+	}
+
+	spin_unlock(&glamo->lock);
+}
+
+#if 0
+#define MEMDETECT_RETRY	6
+static unsigned int detect_memsize(struct glamo_core *glamo)
+{
+	int i;
+
+	/*static const u_int16_t pattern[] = {
+		0x1111, 0x8a8a, 0x2222, 0x7a7a,
+		0x3333, 0x6a6a, 0x4444, 0x5a5a,
+		0x5555, 0x4a4a, 0x6666, 0x3a3a,
+		0x7777, 0x2a2a, 0x8888, 0x1a1a
+	}; */
+
+	for (i = 0; i < MEMDETECT_RETRY; i++) {
+		switch (glamo->type) {
+		case 3600:
+			__reg_write(glamo, GLAMO_REG_MEM_TYPE, 0x0072);
+			__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
+			break;
+		case 3650:
+			switch (glamo->revision) {
+			case GLAMO_CORE_REV_A0:
+				if (i & 1)
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x097a);
+				else
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x0173);
+
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
+				msleep(1);
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
+				break;
+			default:
+				if (i & 1)
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x0972);
+				else
+					__reg_write(glamo, GLAMO_REG_MEM_TYPE,
+						    0x0872);
+
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
+				msleep(1);
+				__reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xe100);
+				break;
+			}
+			break;
+		case 3700:
+			/* FIXME */
+		default:
+			break;
+		}
+
+#if 0
+		/* FIXME: finish implementation */
+		for (j = 0; j < 8; j++) {
+			__
+#endif
+	}
+
+	return 0;
+}
+#endif
+
+/* Find out if we can support this version of the Glamo chip */
+static int glamo_supported(struct glamo_core *glamo)
+{
+	u_int16_t dev_id, rev_id; /*, memsize; */
+
+	dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
+	rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
+
+	switch (dev_id) {
+	case 0x3650:
+		switch (rev_id) {
+		case GLAMO_CORE_REV_A2:
+			break;
+		case GLAMO_CORE_REV_A0:
+		case GLAMO_CORE_REV_A1:
+		case GLAMO_CORE_REV_A3:
+			dev_warn(&glamo->pdev->dev, "untested core revision "
+				 "%04x, your mileage may vary\n", rev_id);
+			break;
+		default:
+			dev_warn(&glamo->pdev->dev, "unknown glamo revision "
+				 "%04x, your mileage may vary\n", rev_id);
+			/* maybe should abort ? */
+		}
+		break;
+	case 0x3600:
+	case 0x3700:
+	default:
+		dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
+			dev_id);
+		return 0;
+	}
+
+	dev_info(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
+		 "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
+		 glamo_pll_rate(glamo, GLAMO_PLL1),
+		 glamo_pll_rate(glamo, GLAMO_PLL2));
+
+	return 1;
+}
+
+
+static int __init glamo_probe(struct platform_device *pdev)
+{
+	int rc, irq;
+	struct glamo_core *glamo;
+
+	if (glamo_handle) {
+		dev_err(&pdev->dev,
+			"This driver supports only one instance\n");
+		return -EBUSY;
+	}
+
+	glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
+	if (!glamo)
+		return -ENOMEM;
+
+	spin_lock_init(&glamo->lock);
+	glamo_handle = glamo;
+	glamo->pdev = pdev;
+	glamo->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	glamo->irq = platform_get_irq(pdev, 0);
+	glamo->pdata = pdev->dev.platform_data;
+	if (!glamo->mem || !glamo->pdata) {
+		dev_err(&pdev->dev, "platform device with no MEM/PDATA ?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	/* register a number of sibling devices whoise IOMEM resources
+	 * are siblings of pdev's IOMEM resource */
+#if 0
+	glamo_core_dev.dev.parent = &pdev.dev;
+	mangle_mem_resources(glamo_core_dev.resources,
+			     glamo_core_dev.num_resources, glamo->mem);
+	glamo_core_dev.resources[1].start = glamo->irq;
+	glamo_core_dev.resources[1].end = glamo->irq;
+	platform_device_register(&glamo_core_dev);
+#endif
+	/* only remap the generic, hostbus and memory controller registers */
+	glamo->base = ioremap(glamo->mem->start, GLAMO_REGOFS_VIDCAP);
+	if (!glamo->base) {
+		dev_err(&pdev->dev, "failed to ioremap() memory region\n");
+		goto out_free;
+	}
+
+	/* bring MCI specific stuff over from our MFD platform data */
+	glamo_mci_def_pdata.glamo_set_mci_power =
+					glamo->pdata->glamo_set_mci_power;
+	glamo_mci_def_pdata.glamo_irq_is_wired =
+					glamo->pdata->glamo_irq_is_wired;
+
+	glamo_mmc_dev.dev.parent = &pdev->dev;
+	/* we need it later to give to the engine enable and disable */
+	glamo_mci_def_pdata.pglamo = glamo;
+	mangle_mem_resources(glamo_mmc_dev.resource,
+			     glamo_mmc_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_mmc_dev);
+
+	glamo_2d_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_2d_dev.resource,
+			     glamo_2d_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_2d_dev);
+
+	glamo_3d_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_3d_dev.resource,
+			     glamo_3d_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_3d_dev);
+
+	glamo_jpeg_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_jpeg_dev.resource,
+			     glamo_jpeg_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_jpeg_dev);
+
+	glamo_mpeg_dev.dev.parent = &pdev->dev;
+	mangle_mem_resources(glamo_mpeg_dev.resource,
+			     glamo_mpeg_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_mpeg_dev);
+
+	glamo->pdata->glamo = glamo;
+	glamo_fb_dev.dev.parent = &pdev->dev;
+	glamo_fb_dev.dev.platform_data = glamo->pdata;
+	mangle_mem_resources(glamo_fb_dev.resource,
+			     glamo_fb_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_fb_dev);
+
+	glamo->pdata->spigpio_info->glamo = glamo;
+	glamo_spigpio_dev.dev.parent = &pdev->dev;
+	glamo_spigpio_dev.dev.platform_data = glamo->pdata->spigpio_info;
+	platform_device_register(&glamo_spigpio_dev);
+
+	/* only request the generic, hostbus and memory controller MMIO */
+	glamo->mem = request_mem_region(glamo->mem->start,
+					GLAMO_REGOFS_VIDCAP, "glamo-core");
+	if (!glamo->mem) {
+		dev_err(&pdev->dev, "failed to request memory region\n");
+		goto out_free;
+	}
+
+	if (!glamo_supported(glamo)) {
+		dev_err(&pdev->dev, "This Glamo is not supported\n");
+		goto out_free;
+	}
+
+	platform_set_drvdata(pdev, glamo);
+
+	dev_dbg(&glamo->pdev->dev, "running init script\n");
+	glamo_run_script(glamo, glamo_init_script,
+			 ARRAY_SIZE(glamo_init_script), 1);
+
+	dev_info(&glamo->pdev->dev, "Glamo core now %uHz CPU / %uHz Memory)\n",
+		 glamo_pll_rate(glamo, GLAMO_PLL1),
+		 glamo_pll_rate(glamo, GLAMO_PLL2));
+
+	for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
+		set_irq_chip(irq, &glamo_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	if (glamo->pdata->glamo_irq_is_wired &&
+	    !glamo->pdata->glamo_irq_is_wired()) {
+		set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
+		set_irq_type(glamo->irq, IRQT_FALLING);
+		glamo->irq_works = 1;
+	} else
+		glamo->irq_works = 0;
+	return 0;
+
+out_free:
+	glamo_handle = NULL;
+	kfree(glamo);
+	return rc;
+}
+
+static int glamo_remove(struct platform_device *pdev)
+{
+	struct glamo_core *glamo = platform_get_drvdata(pdev);
+	int irq;
+
+	disable_irq(glamo->irq);
+	set_irq_chained_handler(glamo->irq, NULL);
+
+	for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
+		set_irq_flags(irq, 0);
+		set_irq_chip(irq, NULL);
+	}
+
+	platform_set_drvdata(pdev, NULL);
+	platform_device_unregister(&glamo_fb_dev);
+	platform_device_unregister(&glamo_mmc_dev);
+	iounmap(glamo->base);
+	release_mem_region(glamo->mem->start, GLAMO_REGOFS_VIDCAP);
+	glamo_handle = NULL;
+	kfree(glamo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int glamo_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return 0;
+}
+
+static int glamo_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+#else
+#define glamo_suspend NULL
+#define glamo_resume  NULL
+#endif
+
+static struct platform_driver glamo_driver = {
+	.probe		= glamo_probe,
+	.remove		= glamo_remove,
+	.suspend	= glamo_suspend,
+	.resume		= glamo_resume,
+	.driver		= {
+		.name	= "glamo3362",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __devinit glamo_init(void)
+{
+	return platform_driver_register(&glamo_driver);
+}
+
+static void __exit glamo_cleanup(void)
+{
+	platform_driver_unregister(&glamo_driver);
+}
+
+module_init(glamo_init);
+module_exit(glamo_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x core/resource driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/glamo/glamo-core.h b/drivers/mfd/glamo/glamo-core.h
new file mode 100644
index 0000000..cf89f03
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-core.h
@@ -0,0 +1,91 @@
+#ifndef __GLAMO_CORE_H
+#define __GLAMO_CORE_H
+
+#include <asm/system.h>
+
+
+/* for the time being, we put the on-screen framebuffer into the lowest
+ * VRAM space.  This should make the code easily compatible with the various
+ * 2MB/4MB/8MB variants of the Smedia chips */
+#define GLAMO_OFFSET_VRAM	0x800000
+#define GLAMO_OFFSET_FB	(GLAMO_OFFSET_VRAM)
+
+/* we only allocate the minimum possible size for the framebuffer to make
+ * sure we have sufficient memory for other functions of the chip */
+//#define GLAMO_FB_SIZE	(640*480*4)	/* == 0x12c000 */
+#define GLAMO_INTERNAL_RAM_SIZE 0x800000
+#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
+#define GLAMO_FB_SIZE	(GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
+
+
+struct glamo_core {
+	int irq;
+	int irq_works; /* 0 means PCB does not support Glamo IRQ */
+	struct resource *mem;
+	struct resource *mem_core;
+	void __iomem *base;
+	struct platform_device *pdev;
+	struct glamofb_platform_data *pdata;
+	u_int16_t type;
+	u_int16_t revision;
+	spinlock_t lock;
+};
+
+struct glamo_script {
+	u_int16_t reg;
+	u_int16_t val;
+};
+
+int glamo_run_script(struct glamo_core *glamo,
+		     struct glamo_script *script, int len, int may_sleep);
+
+enum glamo_engine {
+	GLAMO_ENGINE_CAPTURE,
+	GLAMO_ENGINE_ISP,
+	GLAMO_ENGINE_JPEG,
+	GLAMO_ENGINE_MPEG_ENC,
+	GLAMO_ENGINE_MPEG_DEC,
+	GLAMO_ENGINE_LCD,
+	GLAMO_ENGINE_CMDQ,
+	GLAMO_ENGINE_2D,
+	GLAMO_ENGINE_3D,
+	GLAMO_ENGINE_MMC,
+	GLAMO_ENGINE_MICROP0,
+	GLAMO_ENGINE_RISC,
+	GLAMO_ENGINE_MICROP1_MPEG_ENC,
+	GLAMO_ENGINE_MICROP1_MPEG_DEC,
+#if 0
+	GLAMO_ENGINE_H264_DEC,
+	GLAMO_ENGINE_RISC1,
+	GLAMO_ENGINE_SPI,
+#endif
+	__NUM_GLAMO_ENGINES
+};
+
+struct glamo_mci_pdata {
+	struct glamo_core * pglamo;
+	unsigned int	gpio_detect;
+	unsigned int	gpio_wprotect;
+	unsigned long	ocr_avail;
+	void		(*glamo_set_mci_power)(unsigned char power_mode,
+				     unsigned short vdd);
+	int		(*glamo_irq_is_wired)(void);
+};
+
+
+static inline void glamo_reg_access_delay(void)
+{
+	int n;
+
+	for (n = 0; n != 2; n++)
+		nop();
+}
+
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_reclock(struct glamo_core *glamo,
+			 enum glamo_engine engine, int ps);
+
+#endif /* __GLAMO_CORE_H */
diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c
new file mode 100644
index 0000000..394a0ad
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-fb.c
@@ -0,0 +1,822 @@
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include <linux/glamofb.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#ifdef DEBUG
+#define GLAMO_LOG(...)
+#else
+#define GLAMO_LOG(...) \
+do { \
+	printk(KERN_DEBUG "in %s:%s:%d", __FILE__, __func__, __LINE__); \
+	printk(KERN_DEBUG __VA_ARGS__); \
+} while (0);
+#endif
+
+
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
+
+struct glamofb_handle {
+	struct fb_info *fb;
+	struct device *dev;
+	struct resource *reg;
+	struct resource *fb_res;
+	char __iomem *base;
+	struct glamofb_platform_data *mach_info;
+	char __iomem *cursor_addr;
+	u_int32_t pseudo_pal[16];
+};
+
+/* 'sibling' spi device for lcm init */
+static struct platform_device glamo_spi_dev = {
+	.name		= "glamo-lcm-spi",
+};
+
+
+static int reg_read(struct glamofb_handle *glamo,
+			   u_int16_t reg)
+{
+	glamo_reg_access_delay();
+	return readw(glamo->base + reg);
+}
+
+static void reg_write(struct glamofb_handle *glamo,
+			     u_int16_t reg, u_int16_t val)
+{
+	glamo_reg_access_delay();
+	writew(val, glamo->base + reg);
+}
+
+static struct glamo_script glamo_regs[] = {
+	{ GLAMO_REG_LCD_MODE1, 0x0020 },
+	/* no display rotation, no hardware cursor, no dither, no gamma,
+	 * no retrace flip, vsync low-active, hsync low active,
+	 * no TVCLK, no partial display, hw dest color from fb,
+	 * no partial display mode, LCD1, software flip,  */
+	{ GLAMO_REG_LCD_MODE2, 0x1020 },
+	  /* no video flip, no ptr, no ptr, dhclk,
+	   * normal mode,  no cpuif,
+	   * res, serial msb first, single fb, no fr ctrl,
+	   * cpu if bits all zero, no crc
+	   * 0000 0000 0010  0000 */
+	{ GLAMO_REG_LCD_MODE3, 0x0b40 },
+	  /* src data rgb565, res, 18bit rgb666
+	   * 000 01 011 0100 0000 */
+	{ GLAMO_REG_LCD_POLARITY, 0x440c },
+	  /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
+	   * np cpu if, 9bit serial data, sclk rising edge latch data
+	   * 01 00 0 100 0 000 01 0 0 */
+	{ GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
+	{ GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */
+};
+
+static int glamofb_run_script(struct glamofb_handle *glamo,
+				struct glamo_script *script, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		struct glamo_script *line = &script[i];
+
+		if (line->reg == 0xffff)
+			return 0;
+		else if (line->reg == 0xfffe)
+			msleep(line->val);
+		else
+			reg_write(glamo, script[i].reg, script[i].val);
+	}
+
+	return 0;
+}
+
+static int glamofb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+
+	if (var->yres > glamo->mach_info->yres.max)
+		var->yres = glamo->mach_info->yres.max;
+	else if (var->yres < glamo->mach_info->yres.min)
+		var->yres = glamo->mach_info->yres.min;
+
+	if (var->xres > glamo->mach_info->xres.max)
+		var->xres = glamo->mach_info->xres.max;
+	else if (var->xres < glamo->mach_info->xres.min)
+		var->xres = glamo->mach_info->xres.min;
+
+	if (var->bits_per_pixel > glamo->mach_info->bpp.max)
+		var->bits_per_pixel = glamo->mach_info->bpp.max;
+	else if (var->bits_per_pixel < glamo->mach_info->bpp.min)
+		var->bits_per_pixel = glamo->mach_info->bpp.min;
+
+	/* FIXME: set rgb positions */
+	switch (var->bits_per_pixel) {
+	case 16:
+		switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
+		case GLAMO_LCD_SRC_RGB565:
+			var->red.offset		= 11;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+			var->red.length		= 5;
+			var->green.length	= 6;
+			var->blue.length	= 5;
+			var->transp.length	= 0;
+			break;
+		case GLAMO_LCD_SRC_ARGB1555:
+			var->transp.offset	= 15;
+			var->red.offset		= 10;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+			var->transp.length	= 1;
+			var->red.length		= 5;
+			var->green.length	= 5;
+			var->blue.length	= 5;
+			break;
+		case GLAMO_LCD_SRC_ARGB4444:
+			var->transp.offset	= 12;
+			var->red.offset		= 8;
+			var->green.offset	= 4;
+			var->blue.offset	= 0;
+			var->transp.length	= 4;
+			var->red.length		= 4;
+			var->green.length	= 4;
+			var->blue.length	= 4;
+			break;
+		}
+		break;
+	case 24:
+	case 32:
+	default:
+		/* The Smedia Glamo doesn't support anything but 16bit color */
+		printk(KERN_ERR
+		       "Smedia driver does not [yet?] support 24/32bpp\n");
+		return -EINVAL;
+		break;
+	}
+
+	return 0;
+}
+
+static void reg_set_bit_mask(struct glamofb_handle *glamo,
+			     u_int16_t reg, u_int16_t mask,
+			     u_int16_t val)
+{
+	u_int16_t tmp;
+
+	val &= mask;
+
+	tmp = reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	reg_write(glamo, reg, tmp);
+}
+
+#define GLAMO_LCD_WIDTH_MASK 0x03FF
+#define GLAMO_LCD_HEIGHT_MASK 0x03FF
+#define GLAMO_LCD_PITCH_MASK 0x07FE
+#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
+
+enum orientation {
+    ORIENTATION_PORTRAIT,
+    ORIENTATION_LANDSCAPE
+};
+
+
+static void rotate_lcd(struct glamofb_handle *glamo,
+                       __u32 rotation)
+{
+	int glamo_rot;
+
+	switch (rotation) {
+		case FB_ROTATE_UR:
+			glamo_rot = GLAMO_LCD_ROT_MODE_0;
+			break;
+		case FB_ROTATE_CW:
+			glamo_rot = GLAMO_LCD_ROT_MODE_90;
+			break;
+		case FB_ROTATE_UD:
+			glamo_rot = GLAMO_LCD_ROT_MODE_180;
+			break;
+		case FB_ROTATE_CCW:
+			glamo_rot = GLAMO_LCD_ROT_MODE_270;
+			break;
+		default:
+			glamo_rot = GLAMO_LCD_ROT_MODE_0;
+			break;
+	}
+	glamofb_cmd_mode(glamo, 1);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_WIDTH,
+			 GLAMO_LCD_ROT_MODE_MASK,
+			 glamo_rot);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_MODE1,
+			 GLAMO_LCD_MODE1_ROTATE_EN,
+			 (glamo_rot != GLAMO_LCD_ROT_MODE_0)?
+				 GLAMO_LCD_MODE1_ROTATE_EN : 0);
+	glamofb_cmd_mode(glamo, 0);
+}
+
+static enum orientation get_orientation(struct fb_var_screeninfo *var)
+{
+	GLAMO_LOG("mark\n")
+	if (var->xres <= var->yres) {
+		GLAMO_LOG("portrait\n")
+		return ORIENTATION_PORTRAIT;
+	}
+	GLAMO_LOG("landscape\n")
+	return ORIENTATION_LANDSCAPE;
+}
+
+static int will_orientation_change(struct fb_var_screeninfo *var)
+{
+	enum  orientation orient = get_orientation(var);
+	switch (orient) {
+		case ORIENTATION_LANDSCAPE:
+			if (var->rotate == FB_ROTATE_UR || var->rotate == FB_ROTATE_UD)
+				return 1;
+			break;
+		case ORIENTATION_PORTRAIT:
+			if (var->rotate == FB_ROTATE_CW || var->rotate == FB_ROTATE_CCW)
+				return 1;
+			break;
+	}
+	return 0;
+}
+
+static void glamofb_update_lcd_controller(struct glamofb_handle *glamo,
+					  struct fb_var_screeninfo *var)
+{
+	int sync, bp, disp, fp, total, xres, yres, pitch, orientation_changing;
+
+	GLAMO_LOG("enter: glamo:%#x, var:%#x\n", (unsigned)glamo, (unsigned)var);
+	if (!glamo || !var)
+		return;
+
+	glamofb_cmd_mode(glamo, 1);
+
+	if (var->pixclock)
+		glamo_engine_reclock(glamo->mach_info->glamo,
+				     GLAMO_ENGINE_LCD,
+				     var->pixclock);
+
+	xres = var->xres;
+	yres = var->yres;
+	GLAMO_LOG("xres:%d, yres:%d, rotate:%d\n", xres, yres, var->rotate);
+
+	/*
+	 * figure out if orientation is going to change
+	 */
+	orientation_changing = will_orientation_change(var);
+	GLAMO_LOG("orientation_changing:%d\n", orientation_changing);
+
+        /*
+         * adjust the pitch according to new orientation to come
+         */
+        if (orientation_changing) {
+		pitch = var->yres * var->bits_per_pixel / 8;
+        } else {
+		pitch = var->xres * var->bits_per_pixel / 8;
+        }
+	GLAMO_LOG("pitch:%d\n", pitch);
+
+	/*
+	 * set the awaiten LCD geometry
+	 */
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_WIDTH,
+			 GLAMO_LCD_WIDTH_MASK,
+			 xres);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_HEIGHT,
+			 GLAMO_LCD_HEIGHT_MASK,
+			 yres);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_PITCH,
+			 GLAMO_LCD_PITCH_MASK,
+			 pitch);
+
+	GLAMO_LOG("mark:\n");
+	/*
+	 * honour the rotation request
+	 */
+	rotate_lcd(glamo, var->rotate);
+
+	/*
+	 * update the reported geometry
+	 * of the framebuffer.
+	 */
+	if (orientation_changing) {
+		var->xres_virtual = var->xres = yres;
+		var->yres_virtual = var->yres = xres;
+	} else {
+		var->xres_virtual = var->xres = xres;
+		var->yres_virtual = var->yres = yres;
+	}
+
+	GLAMO_LOG("reported res:(%d,%d)\n", var->xres, var->yres);
+	/*
+	 * update scannout timings
+	 */
+	sync = 0;
+	bp = sync + var->hsync_len;
+	disp = bp + var->left_margin;
+	fp = disp + xres;
+	total = fp + var->right_margin;
+
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_TOTAL,
+			 GLAMO_LCD_HV_TOTAL_MASK, total);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_START,
+			 GLAMO_LCD_HV_RETR_START_MASK, sync);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_END,
+			 GLAMO_LCD_HV_RETR_END_MASK, bp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_START,
+			  GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_END,
+			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+	GLAMO_LOG("mark:\n");
+
+	sync = 0;
+	bp = sync + var->vsync_len;
+	disp = bp + var->upper_margin;
+	fp = disp + yres;
+	total = fp + var->lower_margin;
+
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_TOTAL,
+			 GLAMO_LCD_HV_TOTAL_MASK, total);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_START,
+			  GLAMO_LCD_HV_RETR_START_MASK, sync);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_END,
+			 GLAMO_LCD_HV_RETR_END_MASK, bp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_START,
+			 GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_END,
+			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+	GLAMO_LOG("mark:\n");
+	glamofb_cmd_mode(glamo, 0);
+
+	GLAMO_LOG("leave:\n");
+}
+
+static int glamofb_set_par(struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	default:
+		printk("Smedia driver doesn't support != 16bpp\n");
+		return -EINVAL;
+	}
+
+	info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
+
+	glamofb_update_lcd_controller(glamo, var);
+
+	return 0;
+}
+
+static int glamofb_blank(int blank_mode, struct fb_info *info)
+{
+	/* FIXME */
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int glamofb_setcolreg(unsigned regno,
+			     unsigned red, unsigned green, unsigned blue,
+			     unsigned transp, struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	unsigned int val;
+
+	switch (glamo->fb->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+	case FB_VISUAL_DIRECTCOLOR:
+		/* true-colour, use pseuo-palette */
+
+		if (regno < 16) {
+			u32 *pal = glamo->fb->pseudo_palette;
+
+			val  = chan_to_field(red, &glamo->fb->var.red);
+			val |= chan_to_field(green, &glamo->fb->var.green);
+			val |= chan_to_field(blue, &glamo->fb->var.blue);
+
+			pal[regno] = val;
+		};
+		break;
+	default:
+		return 1; /* unknown type */
+	}
+
+	return 0;
+}
+
+static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct glamofb_handle *glamo = info->par;
+	u_int16_t reg;
+
+	if (cursor->image.depth > 2)
+		return -EINVAL;
+
+	reg = reg_read(glamo, GLAMO_REG_LCD_MODE1);
+
+	if (cursor->enable)
+		reg_write(glamo, GLAMO_REG_LCD_MODE1,
+			  reg | GLAMO_LCD_MODE1_CURSOR_EN);
+	else
+		reg_write(glamo, GLAMO_REG_LCD_MODE1,
+			  reg & ~GLAMO_LCD_MODE1_CURSOR_EN);
+
+	if (cursor->set & FB_CUR_SETPOS) {
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
+			  cursor->image.dx);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
+			  cursor->image.dy);
+	}
+
+	if (cursor->set & FB_CUR_SETCMAP) {
+		/* FIXME */
+	}
+
+	if (cursor->set & FB_CUR_SETSIZE ||
+	    cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
+		int x, y, op;
+		const unsigned char *pcol = cursor->image.data;
+		const unsigned char *pmsk = cursor->mask;
+		void __iomem *dst = glamo->cursor_addr;
+		unsigned char dcol = 0;
+		unsigned char dmsk = 0;
+
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
+			  cursor->image.width);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
+			  cursor->image.width * 2);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
+			  cursor->image.height);
+
+		for (op = 0; op < (cursor->image.width *
+				   cursor->image.height * 2)/8; op += 4)
+			writel(0x0, dst + op);
+
+		for (y = 0; y < cursor->image.height; y++) {
+			for (x = 0; x < cursor->image.width; x++) {
+				if ((x % 8) == 0) {
+					dcol = *pcol++;
+					dmsk = *pmsk++;
+				} else {
+					dcol >>= 1;
+					dmsk >>= 1;
+				}
+
+				if (dmsk & 1) {
+					unsigned int op;
+
+					op = (dcol & 1) ? 1 : 3;
+					op <<= ((x % 4) * 2);
+
+					op |= readb(dst + (x / 4));
+					writeb(op, dst + (x / 4));
+				}
+			}
+		}
+	}
+}
+
+static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
+{
+	return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
+}
+
+void glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
+{
+	dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
+	if (on) {
+		dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
+			__FUNCTION__);
+		while (!glamofb_cmdq_empty(gfb))
+			yield();
+		dev_dbg(gfb->dev, "empty!\n");
+
+		/* display the entire frame then switch to command */
+		reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+			  GLAMO_LCD_CMD_TYPE_DISP |
+			  GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
+
+		/* wait until LCD is idle */
+		dev_dbg(gfb->dev, "waiting for LCD idle: ");
+		while (!reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12))
+			yield();
+		dev_dbg(gfb->dev, "idle!\n");
+
+		msleep(90);
+	} else {
+		/* RGB interface needs vsync/hsync */
+		if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
+			reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+				  GLAMO_LCD_CMD_TYPE_DISP |
+				  GLAMO_LCD_CMD_DATA_DISP_SYNC);
+
+		reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+			  GLAMO_LCD_CMD_TYPE_DISP |
+			  GLAMO_LCD_CMD_DATA_DISP_FIRE);
+	}
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_mode);
+
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val)
+{
+	dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n",
+		__FUNCTION__);
+	while (!glamofb_cmdq_empty(gfb))
+		yield();
+	dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val);
+
+	reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_write);
+
+static struct fb_ops glamofb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= glamofb_check_var,
+	.fb_set_par	= glamofb_set_par,
+	.fb_blank	= glamofb_blank,
+	.fb_setcolreg	= glamofb_setcolreg,
+	//.fb_cursor	= glamofb_cursor,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int glamofb_init_regs(struct glamofb_handle *glamo)
+{
+	struct fb_info *info = glamo->fb;
+
+	glamofb_check_var(&info->var, info);
+	glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
+	glamofb_set_par(info);
+
+	return 0;
+}
+
+static int __init glamofb_probe(struct platform_device *pdev)
+{
+	int rc = -EIO;
+	struct fb_info *fbinfo;
+	struct glamofb_handle *glamofb;
+	struct glamofb_platform_data *mach_info = pdev->dev.platform_data;
+
+	printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
+		"OpenMoko, Inc.\n");
+
+	fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
+	if (!fbinfo)
+		return -ENOMEM;
+
+	glamofb = fbinfo->par;
+	glamofb->fb = fbinfo;
+	glamofb->dev = &pdev->dev;
+
+	strcpy(fbinfo->fix.id, "SMedia Glamo");
+
+	glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "glamo-fb-regs");
+	if (!glamofb->reg) {
+		dev_err(&pdev->dev, "platform device with no registers?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+							"glamo-fb-mem");
+	if (!glamofb->fb_res) {
+		dev_err(&pdev->dev, "platform device with no memory ?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	glamofb->reg = request_mem_region(glamofb->reg->start,
+					  RESSIZE(glamofb->reg), pdev->name);
+	if (!glamofb->reg) {
+		dev_err(&pdev->dev, "failed to request mmio region\n");
+		goto out_free;
+	}
+
+	glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
+					     mach_info->fb_mem_size,
+					     pdev->name);
+	if (!glamofb->fb_res) {
+		dev_err(&pdev->dev, "failed to request vram region\n");
+		goto out_release_reg;
+	}
+
+	/* we want to remap only the registers required for this core
+	 * driver. */
+	glamofb->base = ioremap(glamofb->reg->start, RESSIZE(glamofb->reg));
+	if (!glamofb->base) {
+		dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
+		goto out_release_fb;
+	}
+	fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start;
+	fbinfo->fix.smem_len = mach_info->fb_mem_size;
+
+	fbinfo->screen_base = ioremap(glamofb->fb_res->start,
+				       RESSIZE(glamofb->fb_res));
+	if (!fbinfo->screen_base) {
+		dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
+		goto out_release_fb;
+	}
+
+	platform_set_drvdata(pdev, fbinfo);
+
+	glamofb->mach_info = pdev->dev.platform_data;
+
+	fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+	fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.type_aux = 0;
+	fbinfo->fix.xpanstep = 0;
+	fbinfo->fix.ypanstep = 0;
+	fbinfo->fix.ywrapstep = 0;
+	fbinfo->fix.accel = FB_ACCEL_NONE; /* FIXME */
+
+	fbinfo->var.nonstd = 0;
+	fbinfo->var.activate = FB_ACTIVATE_NOW;
+	fbinfo->var.height = mach_info->height;
+	fbinfo->var.width = mach_info->width;
+	fbinfo->var.accel_flags = 0;
+	fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+	fbinfo->fbops = &glamofb_ops;
+	fbinfo->flags = FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette = &glamofb->pseudo_pal;
+
+	fbinfo->var.xres = mach_info->xres.defval;
+	fbinfo->var.xres_virtual = mach_info->xres.defval;
+	fbinfo->var.yres = mach_info->yres.defval;
+	fbinfo->var.yres_virtual = mach_info->yres.defval;
+	fbinfo->var.bits_per_pixel = mach_info->bpp.defval;
+
+	fbinfo->var.pixclock = mach_info->pixclock;
+	fbinfo->var.left_margin = mach_info->left_margin;
+	fbinfo->var.right_margin = mach_info->right_margin;
+	fbinfo->var.upper_margin = mach_info->upper_margin;
+	fbinfo->var.lower_margin = mach_info->lower_margin;
+	fbinfo->var.hsync_len = mach_info->hsync_len;
+	fbinfo->var.vsync_len = mach_info->vsync_len;
+
+	memset(fbinfo->screen_base, 0, fbinfo->fix.smem_len);
+
+	glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD);
+	glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD);
+	glamofb_init_regs(glamofb);
+
+	rc = register_framebuffer(fbinfo);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to register framebuffer\n");
+		goto out_unmap_fb;
+	}
+
+	if (mach_info->spi_info) {
+		/* register the sibling spi device */
+		mach_info->spi_info->glamofb_handle = glamofb;
+		glamo_spi_dev.dev.parent = &pdev->dev;
+		glamo_spi_dev.dev.platform_data = mach_info->spi_info;
+		platform_device_register(&glamo_spi_dev);
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		fbinfo->node, fbinfo->fix.id);
+
+	return 0;
+
+out_unmap_fb:
+	iounmap(fbinfo->screen_base);
+	iounmap(glamofb->base);
+out_release_fb:
+	release_mem_region(glamofb->fb_res->start, RESSIZE(glamofb->fb_res));
+out_release_reg:
+	release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg));
+out_free:
+	framebuffer_release(fbinfo);
+	return rc;
+}
+
+static int glamofb_remove(struct platform_device *pdev)
+{
+	struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(glamofb->base);
+	release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg));
+	kfree(glamofb);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int glamofb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return 0;
+}
+
+static int glamofb_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+#else
+#define glamofb_suspend NULL
+#define glamofb_resume  NULL
+#endif
+
+static struct platform_driver glamofb_driver = {
+	.probe		= glamofb_probe,
+	.remove		= glamofb_remove,
+	.suspend	= glamofb_suspend,
+	.resume		= glamofb_resume,
+	.driver		= {
+		.name	= "glamo-fb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __devinit glamofb_init(void)
+{
+	return platform_driver_register(&glamofb_driver);
+}
+
+static void __exit glamofb_cleanup(void)
+{
+	platform_driver_unregister(&glamofb_driver);
+}
+
+module_init(glamofb_init);
+module_exit(glamofb_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/glamo/glamo-gpio.c b/drivers/mfd/glamo/glamo-gpio.c
new file mode 100644
index 0000000..45d0bf9
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-gpio.c
@@ -0,0 +1,62 @@
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <linux/glamo-gpio.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
+		       unsigned int value)
+{
+	unsigned int reg = REG_OF_GPIO(pin);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+	if (value)
+		tmp |= OUTPUT_BIT(pin);
+	else
+		tmp &= ~OUTPUT_BIT(pin);
+	writew(tmp, glamo->base + reg);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_gpio_setpin);
+
+int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin)
+{
+	return readw(REG_OF_GPIO(pin)) & INPUT_BIT(pin) ? 1 : 0;
+}
+EXPORT_SYMBOL(glamo_gpio_getpin);
+
+void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc)
+{
+	unsigned int reg = REG_OF_GPIO(pinfunc);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+
+	if ((pinfunc & 0x00f0) == GLAMO_GPIO_F_FUNC) {
+		/* pin is a function pin: clear gpio bit */
+		tmp &= ~FUNC_BIT(pinfunc);
+	} else {
+		/* pin is gpio: set gpio bit */
+		tmp |= FUNC_BIT(pinfunc);
+
+		if (pinfunc & GLAMO_GPIO_F_IN) {
+			/* gpio input: set bit to disable output mode */
+			tmp |= GPIO_OUT_BIT(pinfunc);
+		} else if (pinfunc & GLAMO_GPIO_F_OUT) {
+			/* gpio output: clear bit to enable output mode */
+			tmp &= ~GPIO_OUT_BIT(pinfunc);
+		}
+	}
+	writew(tmp, glamo->base + reg);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_gpio_cfgpin);
+
diff --git a/drivers/mfd/glamo/glamo-lcm-spi.c b/drivers/mfd/glamo/glamo-lcm-spi.c
new file mode 100644
index 0000000..92cabe4
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-lcm-spi.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2007 OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Smedia Glamo GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver currently only implements a minimum subset of the hardware
+ * features, esp. those features that are required to drive the jbt6k74
+ * LCM controller asic in the TD028TTEC1 LCM.
+ *
+*/
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/glamo.h>
+
+#include <linux/glamofb.h>
+
+#include <asm/hardware.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+struct glamo_spi {
+	struct spi_bitbang	bitbang;
+	struct spi_master	*master;
+	struct glamo_spi_info	*info;
+	struct device		*dev;
+};
+
+static inline struct glamo_spi *to_gs(struct spi_device *spi)
+{
+	return spi->controller_data;
+}
+
+static int glamo_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct glamo_spi *gs = to_gs(spi);
+	unsigned int bpw;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+
+	if (bpw != 9 && bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void glamo_spi_chipsel(struct spi_device *spi, int value)
+{
+#if 0
+	struct glamo_spi *gs = to_gs(spi);
+
+	dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
+		value, spi, gs, gs->info, gs->info->glamofb_handle);
+
+	glamofb_cmd_mode(gs->info->glamofb_handle, value);
+#endif
+}
+
+static int glamo_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct glamo_spi *gs = to_gs(spi);
+	const u_int16_t *ui16 = (const u_int16_t *) t->tx_buf;
+	u_int16_t nine_bits;
+	int i;
+
+	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, bpw %d, len %d\n",
+		t->tx_buf, t->rx_buf, t->bits_per_word, t->len);
+
+	if (spi->bits_per_word == 9)
+		nine_bits = (1 << 9);
+	else
+		nine_bits = 0;
+
+	if (t->len > 3 * sizeof(u_int16_t)) {
+		dev_err(&spi->dev, "this driver doesn't support "
+			"%u sized xfers\n", t->len);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < t->len/sizeof(u_int16_t); i++) {
+		/* actually transfer the data */
+#if 1
+		glamofb_cmd_write(gs->info->glamofb_handle,
+				  GLAMO_LCD_CMD_TYPE_SERIAL | nine_bits |
+				  (1 << 10) | (1 << 11) | (ui16[i] & 0x1ff));
+#endif
+		/* FIXME: fire ?!? */
+		if (i == 0 && (ui16[i] & 0x1ff) == 0x29) {
+			dev_dbg(&spi->dev, "leaving command mode\n");
+			glamofb_cmd_mode(gs->info->glamofb_handle, 0);
+		}
+	}
+
+	return t->len;
+}
+
+static int glamo_spi_setup(struct spi_device *spi)
+{
+	int ret;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 9;
+
+	/* FIXME: hardware can do this */
+	if (spi->mode & SPI_LSB_FIRST)
+		return -EINVAL;
+
+	ret = glamo_spi_setupxfer(spi, NULL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw\n",
+		__FUNCTION__, spi->mode, spi->bits_per_word);
+
+	return 0;
+}
+
+static int glamo_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct glamo_spi *sp;
+	int ret;
+	int i;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spi));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+	memset(sp, 0, sizeof(struct glamo_spi));
+
+	sp->master = spi_master_get(master);
+	sp->info = pdev->dev.platform_data;
+	if (!sp->info) {
+		dev_err(&pdev->dev, "can't operate without platform data\n");
+		ret = -EIO;
+		goto err_no_pdev;
+	}
+	dev_dbg(&pdev->dev, "sp->info(pdata) = %p\n", sp->info);
+
+	sp->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, sp);
+
+	sp->bitbang.master = sp->master;
+	sp->bitbang.setup_transfer = glamo_spi_setupxfer;
+	sp->bitbang.chipselect = glamo_spi_chipsel;
+	sp->bitbang.txrx_bufs = glamo_spi_txrx;
+	sp->bitbang.master->setup = glamo_spi_setup;
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	/* register the chips to go with the board */
+
+	glamofb_cmd_mode(sp->info->glamofb_handle, 1);
+
+	for (i = 0; i < sp->info->board_size; i++) {
+		dev_info(&pdev->dev, "registering %p: %s\n",
+			 &sp->info->board_info[i],
+			 sp->info->board_info[i].modalias);
+
+		sp->info->board_info[i].controller_data = sp;
+		spi_new_device(master, sp->info->board_info + i);
+	}
+
+	return 0;
+
+err_no_bitbang:
+	platform_set_drvdata(pdev, NULL);
+err_no_pdev:
+	spi_master_put(sp->bitbang.master);
+err:
+	return ret;
+
+}
+
+static int glamo_spi_remove(struct platform_device *pdev)
+{
+	struct glamo_spi *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+#define glamo_spi_suspend NULL
+#define glamo_spi_resume NULL
+
+static struct platform_driver glamo_spi_drv = {
+	.probe		= glamo_spi_probe,
+	.remove		= glamo_spi_remove,
+	.suspend	= glamo_spi_suspend,
+	.resume		= glamo_spi_resume,
+	.driver		= {
+		.name	= "glamo-lcm-spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init glamo_spi_init(void)
+{
+	return platform_driver_register(&glamo_spi_drv);
+}
+
+static void __exit glamo_spi_exit(void)
+{
+	platform_driver_unregister(&glamo_spi_drv);
+}
+
+module_init(glamo_spi_init);
+module_exit(glamo_spi_exit);
+
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/glamo/glamo-regs.h b/drivers/mfd/glamo/glamo-regs.h
new file mode 100644
index 0000000..151cd66
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-regs.h
@@ -0,0 +1,477 @@
+#ifndef _GLAMO_REGS_H
+#define _GLAMO_REGS_H
+
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+enum glamo_regster_offsets {
+	GLAMO_REGOFS_GENERIC	= 0x0000,
+	GLAMO_REGOFS_HOSTBUS	= 0x0200,
+	GLAMO_REGOFS_MEMORY	= 0x0300,
+	GLAMO_REGOFS_VIDCAP	= 0x0400,
+	GLAMO_REGOFS_ISP	= 0x0500,
+	GLAMO_REGOFS_JPEG	= 0x0800,
+	GLAMO_REGOFS_MPEG	= 0x0c00,
+	GLAMO_REGOFS_LCD	= 0x1100,
+	GLAMO_REGOFS_MMC	= 0x1400,
+	GLAMO_REGOFS_MPROC0	= 0x1500,
+	GLAMO_REGOFS_MPROC1	= 0x1580,
+	GLAMO_REGOFS_CMDQUEUE	= 0x1600,
+	GLAMO_REGOFS_RISC	= 0x1680,
+	GLAMO_REGOFS_2D		= 0x1700,
+	GLAMO_REGOFS_3D		= 0x1b00,
+	GLAMO_REGOFS_END	= 0x2400,
+};
+
+
+enum glamo_register_generic {
+	GLAMO_REG_GCONF1	= 0x0000,
+	GLAMO_REG_GCONF2	= 0x0002,
+#define	GLAMO_REG_DEVICE_ID	GLAMO_REG_GCONF2
+	GLAMO_REG_GCONF3	= 0x0004,
+#define	GLAMO_REG_REVISION_ID	GLAMO_REG_GCONF3
+	GLAMO_REG_IRQ_GEN1	= 0x0006,
+#define GLAMO_REG_IRQ_ENABLE	GLAMO_REG_IRQ_GEN1
+	GLAMO_REG_IRQ_GEN2	= 0x0008,
+#define GLAMO_REG_IRQ_SET	GLAMO_REG_IRQ_GEN2
+	GLAMO_REG_IRQ_GEN3	= 0x000a,
+#define GLAMO_REG_IRQ_CLEAR	GLAMO_REG_IRQ_GEN3
+	GLAMO_REG_IRQ_GEN4	= 0x000c,
+#define GLAMO_REG_IRQ_STATUS	GLAMO_REG_IRQ_GEN4
+	GLAMO_REG_CLOCK_HOST	= 0x0010,
+	GLAMO_REG_CLOCK_MEMORY	= 0x0012,
+	GLAMO_REG_CLOCK_LCD	= 0x0014,
+	GLAMO_REG_CLOCK_MMC	= 0x0016,
+	GLAMO_REG_CLOCK_ISP	= 0x0018,
+	GLAMO_REG_CLOCK_JPEG	= 0x001a,
+	GLAMO_REG_CLOCK_3D	= 0x001c,
+	GLAMO_REG_CLOCK_2D	= 0x001e,
+	GLAMO_REG_CLOCK_RISC1	= 0x0020,	/* 3365 only? */
+	GLAMO_REG_CLOCK_RISC2	= 0x0022,	/* 3365 only? */
+	GLAMO_REG_CLOCK_MPEG	= 0x0024,
+	GLAMO_REG_CLOCK_MPROC	= 0x0026,
+
+	GLAMO_REG_CLOCK_GEN5_1	= 0x0030,
+	GLAMO_REG_CLOCK_GEN5_2	= 0x0032,
+	GLAMO_REG_CLOCK_GEN6	= 0x0034,
+	GLAMO_REG_CLOCK_GEN7	= 0x0036,
+	GLAMO_REG_CLOCK_GEN8	= 0x0038,
+	GLAMO_REG_CLOCK_GEN9	= 0x003a,
+	GLAMO_REG_CLOCK_GEN10	= 0x003c,
+	GLAMO_REG_CLOCK_GEN11	= 0x003e,
+	GLAMO_REG_PLL_GEN1	= 0x0040,
+	GLAMO_REG_PLL_GEN2	= 0x0042,
+	GLAMO_REG_PLL_GEN3	= 0x0044,
+	GLAMO_REG_PLL_GEN4	= 0x0046,
+	GLAMO_REG_PLL_GEN5	= 0x0048,
+	GLAMO_REG_GPIO_GEN1	= 0x0050,
+	GLAMO_REG_GPIO_GEN2	= 0x0052,
+	GLAMO_REG_GPIO_GEN3	= 0x0054,
+	GLAMO_REG_GPIO_GEN4	= 0x0056,
+	GLAMO_REG_GPIO_GEN5	= 0x0058,
+	GLAMO_REG_GPIO_GEN6	= 0x005a,
+	GLAMO_REG_GPIO_GEN7	= 0x005c,
+	GLAMO_REG_GPIO_GEN8	= 0x005e,
+	GLAMO_REG_GPIO_GEN9	= 0x0060,
+	GLAMO_REG_GPIO_GEN10	= 0x0062,
+	GLAMO_REG_DFT_GEN1	= 0x0070,
+	GLAMO_REG_DFT_GEN2	= 0x0072,
+	GLAMO_REG_DFT_GEN3	= 0x0074,
+	GLAMO_REG_DFT_GEN4	= 0x0076,
+
+	GLAMO_REG_DFT_GEN5	= 0x01e0,
+	GLAMO_REG_DFT_GEN6	= 0x01f0,
+};
+
+#define GLAMO_REG_HOSTBUS(x)	(GLAMO_REGOFS_HOSTBUS-2+(x*2))
+
+#define REG_MEM(x)		(GLAMO_REGOFS_MEMORY+(x))
+#define GLAMO_REG_MEM_TIMING(x)	(GLAMO_REG_MEM_TIMING1-2+(x*2))
+
+enum glamo_register_mem {
+	GLAMO_REG_MEM_TYPE	= REG_MEM(0x00),
+	GLAMO_REG_MEM_GEN	= REG_MEM(0x02),
+	GLAMO_REG_MEM_TIMING1	= REG_MEM(0x04),
+	GLAMO_REG_MEM_TIMING2	= REG_MEM(0x06),
+	GLAMO_REG_MEM_TIMING3	= REG_MEM(0x08),
+	GLAMO_REG_MEM_TIMING4	= REG_MEM(0x0a),
+	GLAMO_REG_MEM_TIMING5	= REG_MEM(0x0c),
+	GLAMO_REG_MEM_TIMING6	= REG_MEM(0x0e),
+	GLAMO_REG_MEM_TIMING7	= REG_MEM(0x10),
+	GLAMO_REG_MEM_TIMING8	= REG_MEM(0x12),
+	GLAMO_REG_MEM_TIMING9	= REG_MEM(0x14),
+	GLAMO_REG_MEM_TIMING10	= REG_MEM(0x16),
+	GLAMO_REG_MEM_TIMING11	= REG_MEM(0x18),
+	GLAMO_REG_MEM_POWER1	= REG_MEM(0x1a),
+	GLAMO_REG_MEM_POWER2	= REG_MEM(0x1c),
+	GLAMO_REG_MEM_LCD_BUF1	= REG_MEM(0x1e),
+	GLAMO_REG_MEM_LCD_BUF2	= REG_MEM(0x20),
+	GLAMO_REG_MEM_LCD_BUF3	= REG_MEM(0x22),
+	GLAMO_REG_MEM_LCD_BUF4	= REG_MEM(0x24),
+	GLAMO_REG_MEM_BIST1	= REG_MEM(0x26),
+	GLAMO_REG_MEM_BIST2	= REG_MEM(0x28),
+	GLAMO_REG_MEM_BIST3	= REG_MEM(0x2a),
+	GLAMO_REG_MEM_BIST4	= REG_MEM(0x2c),
+	GLAMO_REG_MEM_BIST5	= REG_MEM(0x2e),
+	GLAMO_REG_MEM_MAH1	= REG_MEM(0x30),
+	GLAMO_REG_MEM_MAH2	= REG_MEM(0x32),
+	GLAMO_REG_MEM_DRAM1	= REG_MEM(0x34),
+	GLAMO_REG_MEM_DRAM2	= REG_MEM(0x36),
+	GLAMO_REG_MEM_CRC	= REG_MEM(0x38),
+};
+
+#define GLAMO_MEM_TYPE_MASK	0x03
+
+enum glamo_reg_mem_dram1 {
+	GLAMO_MEM_DRAM1_EN_SDRAM_CLK	= (1 << 11),
+	GLAMO_MEM_DRAM1_SELF_REFRESH	= (1 << 12),
+};
+
+enum glamo_reg_mem_dram2 {
+	GLAMO_MEM_DRAM2_DEEP_PWRDOWN	= (1 << 12),
+};
+
+enum glamo_irq {
+	GLAMO_IRQ_HOSTBUS	= 0x0001,
+	GLAMO_IRQ_JPEG		= 0x0002,
+	GLAMO_IRQ_MPEG		= 0x0004,
+	GLAMO_IRQ_MPROC1	= 0x0008,
+	GLAMO_IRQ_MPROC0	= 0x0010,
+	GLAMO_IRQ_CMDQUEUE	= 0x0020,
+	GLAMO_IRQ_2D		= 0x0040,
+	GLAMO_IRQ_MMC		= 0x0080,
+	GLAMO_IRQ_RISC		= 0x0100,
+};
+
+enum glamo_reg_clock_host {
+	GLAMO_CLOCK_HOST_DG_BCLK	= 0x0001,
+	GLAMO_CLOCK_HOST_DG_M0CLK	= 0x0004,
+	GLAMO_CLOCK_HOST_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_mem {
+	GLAMO_CLOCK_MEM_DG_M1CLK	= 0x0001,
+	GLAMO_CLOCK_MEM_EN_M1CLK	= 0x0002,
+	GLAMO_CLOCK_MEM_DG_MOCACLK	= 0x0004,
+	GLAMO_CLOCK_MEM_EN_MOCACLK	= 0x0008,
+	GLAMO_CLOCK_MEM_RESET		= 0x1000,
+	GLAMO_CLOCK_MOCA_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_lcd {
+	GLAMO_CLOCK_LCD_DG_DCLK		= 0x0001,
+	GLAMO_CLOCK_LCD_EN_DCLK		= 0x0002,
+	GLAMO_CLOCK_LCD_DG_DMCLK	= 0x0004,
+	GLAMO_CLOCK_LCD_EN_DMCLK	= 0x0008,
+	//
+	GLAMO_CLOCK_LCD_EN_DHCLK	= 0x0020,
+	GLAMO_CLOCK_LCD_DG_M5CLK	= 0x0040,
+	GLAMO_CLOCK_LCD_EN_M5CLK	= 0x0080,
+	GLAMO_CLOCK_LCD_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_mmc {
+	GLAMO_CLOCK_MMC_DG_TCLK		= 0x0001,
+	GLAMO_CLOCK_MMC_EN_TCLK		= 0x0002,
+	GLAMO_CLOCK_MMC_DG_M9CLK	= 0x0004,
+	GLAMO_CLOCK_MMC_EN_M9CLK	= 0x0008,
+	GLAMO_CLOCK_MMC_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_isp {
+	GLAMO_CLOCK_ISP_DG_I1CLK	= 0x0001,
+	GLAMO_CLOCK_ISP_EN_I1CLK	= 0x0002,
+	GLAMO_CLOCK_ISP_DG_CCLK		= 0x0004,
+	GLAMO_CLOCK_ISP_EN_CCLK		= 0x0008,
+	//
+	GLAMO_CLOCK_ISP_EN_SCLK		= 0x0020,
+	GLAMO_CLOCK_ISP_DG_M2CLK	= 0x0040,
+	GLAMO_CLOCK_ISP_EN_M2CLK	= 0x0080,
+	GLAMO_CLOCK_ISP_DG_M15CLK	= 0x0100,
+	GLAMO_CLOCK_ISP_EN_M15CLK	= 0x0200,
+	GLAMO_CLOCK_ISP1_RESET		= 0x1000,
+	GLAMO_CLOCK_ISP2_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_jpeg {
+	GLAMO_CLOCK_JPEG_DG_JCLK	= 0x0001,
+	GLAMO_CLOCK_JPEG_EN_JCLK	= 0x0002,
+	GLAMO_CLOCK_JPEG_DG_M3CLK	= 0x0004,
+	GLAMO_CLOCK_JPEG_EN_M3CLK	= 0x0008,
+	GLAMO_CLOCK_JPEG_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_2d {
+	GLAMO_CLOCK_2D_DG_GCLK		= 0x0001,
+	GLAMO_CLOCK_2D_EN_GCLK		= 0x0002,
+	GLAMO_CLOCK_2D_DG_M7CLK		= 0x0004,
+	GLAMO_CLOCK_2D_EN_M7CLK		= 0x0008,
+	GLAMO_CLOCK_2D_DG_M6CLK		= 0x0010,
+	GLAMO_CLOCK_2D_EN_M6CLK		= 0x0020,
+	GLAMO_CLOCK_2D_RESET		= 0x1000,
+	GLAMO_CLOCK_2D_CQ_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_3d {
+	GLAMO_CLOCK_3D_DG_ECLK		= 0x0001,
+	GLAMO_CLOCK_3D_EN_ECLK		= 0x0002,
+	GLAMO_CLOCK_3D_DG_RCLK		= 0x0004,
+	GLAMO_CLOCK_3D_EN_RCLK		= 0x0008,
+	GLAMO_CLOCK_3D_DG_M8CLK		= 0x0010,
+	GLAMO_CLOCK_3D_EN_M8CLK		= 0x0020,
+	GLAMO_CLOCK_3D_BACK_RESET	= 0x1000,
+	GLAMO_CLOCK_3D_FRONT_RESET	= 0x2000,
+};
+
+enum glamo_reg_clock_mpeg {
+	GLAMO_CLOCK_MPEG_DG_X0CLK	= 0x0001,
+	GLAMO_CLOCK_MPEG_EN_X0CLK	= 0x0002,
+	GLAMO_CLOCK_MPEG_DG_X1CLK	= 0x0004,
+	GLAMO_CLOCK_MPEG_EN_X1CLK	= 0x0008,
+	GLAMO_CLOCK_MPEG_DG_X2CLK	= 0x0010,
+	GLAMO_CLOCK_MPEG_EN_X2CLK	= 0x0020,
+	GLAMO_CLOCK_MPEG_DG_X3CLK	= 0x0040,
+	GLAMO_CLOCK_MPEG_EN_X3CLK	= 0x0080,
+	GLAMO_CLOCK_MPEG_DG_X4CLK	= 0x0100,
+	GLAMO_CLOCK_MPEG_EN_X4CLK	= 0x0200,
+	GLAMO_CLOCK_MPEG_DG_X6CLK	= 0x0400,
+	GLAMO_CLOCK_MPEG_EN_X6CLK	= 0x0800,
+	GLAMO_CLOCK_MPEG_ENC_RESET	= 0x1000,
+	GLAMO_CLOCK_MPEG_DEC_RESET	= 0x2000,
+};
+
+enum glamo_reg_clock51 {
+	GLAMO_CLOCK_GEN51_EN_DIV_MCLK	= 0x0001,
+	GLAMO_CLOCK_GEN51_EN_DIV_SCLK	= 0x0002,
+	GLAMO_CLOCK_GEN51_EN_DIV_JCLK	= 0x0004,
+	GLAMO_CLOCK_GEN51_EN_DIV_DCLK	= 0x0008,
+	GLAMO_CLOCK_GEN51_EN_DIV_DMCLK	= 0x0010,
+	GLAMO_CLOCK_GEN51_EN_DIV_DHCLK	= 0x0020,
+	GLAMO_CLOCK_GEN51_EN_DIV_GCLK	= 0x0040,
+	GLAMO_CLOCK_GEN51_EN_DIV_TCLK	= 0x0080,
+	/* FIXME: higher bits */
+};
+
+enum glamo_reg_hostbus2 {
+	GLAMO_HOSTBUS2_MMIO_EN_ISP	= 0x0001,
+	GLAMO_HOSTBUS2_MMIO_EN_JPEG	= 0x0002,
+	GLAMO_HOSTBUS2_MMIO_EN_MPEG	= 0x0004,
+	GLAMO_HOSTBUS2_MMIO_EN_LCD	= 0x0008,
+	GLAMO_HOSTBUS2_MMIO_EN_MMC	= 0x0010,
+	GLAMO_HOSTBUS2_MMIO_EN_MICROP0	= 0x0020,
+	GLAMO_HOSTBUS2_MMIO_EN_MICROP1	= 0x0040,
+	GLAMO_HOSTBUS2_MMIO_EN_CQ	= 0x0080,
+	GLAMO_HOSTBUS2_MMIO_EN_RISC	= 0x0100,
+	GLAMO_HOSTBUS2_MMIO_EN_2D	= 0x0200,
+	GLAMO_HOSTBUS2_MMIO_EN_3D	= 0x0400,
+};
+
+/* LCD Controller */
+
+#define REG_LCD(x)	(x)
+enum glamo_reg_lcd {
+	GLAMO_REG_LCD_MODE1		= REG_LCD(0x00),
+	GLAMO_REG_LCD_MODE2		= REG_LCD(0x02),
+	GLAMO_REG_LCD_MODE3		= REG_LCD(0x04),
+	GLAMO_REG_LCD_WIDTH		= REG_LCD(0x06),
+	GLAMO_REG_LCD_HEIGHT		= REG_LCD(0x08),
+	GLAMO_REG_LCD_POLARITY		= REG_LCD(0x0a),
+	GLAMO_REG_LCD_A_BASE1		= REG_LCD(0x0c),
+	GLAMO_REG_LCD_A_BASE2		= REG_LCD(0x0e),
+	GLAMO_REG_LCD_B_BASE1		= REG_LCD(0x10),
+	GLAMO_REG_LCD_B_BASE2		= REG_LCD(0x12),
+	GLAMO_REG_LCD_C_BASE1		= REG_LCD(0x14),
+	GLAMO_REG_LCD_C_BASE2		= REG_LCD(0x16),
+	GLAMO_REG_LCD_PITCH		= REG_LCD(0x18),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_TOTAL	= REG_LCD(0x1c),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_RETR_START	= REG_LCD(0x20),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_RETR_END	= REG_LCD(0x24),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_DISP_START	= REG_LCD(0x28),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_DISP_END	= REG_LCD(0x2c),
+	/* RES */
+	GLAMO_REG_LCD_VERT_TOTAL	= REG_LCD(0x30),
+	/* RES */
+	GLAMO_REG_LCD_VERT_RETR_START	= REG_LCD(0x34),
+	/* RES */
+	GLAMO_REG_LCD_VERT_RETR_END	= REG_LCD(0x38),
+	/* RES */
+	GLAMO_REG_LCD_VERT_DISP_START	= REG_LCD(0x3c),
+	/* RES */
+	GLAMO_REG_LCD_VERT_DISP_END	= REG_LCD(0x40),
+	/* RES */
+	GLAMO_REG_LCD_POL		= REG_LCD(0x44),
+	GLAMO_REG_LCD_DATA_START	= REG_LCD(0x46),
+	GLAMO_REG_LCD_FRATE_CONTRO	= REG_LCD(0x48),
+	GLAMO_REG_LCD_DATA_CMD_HDR	= REG_LCD(0x4a),
+	GLAMO_REG_LCD_SP_START		= REG_LCD(0x4c),
+	GLAMO_REG_LCD_SP_END		= REG_LCD(0x4e),
+	GLAMO_REG_LCD_CURSOR_BASE1	= REG_LCD(0x50),
+	GLAMO_REG_LCD_CURSOR_BASE2	= REG_LCD(0x52),
+	GLAMO_REG_LCD_CURSOR_PITCH	= REG_LCD(0x54),
+	GLAMO_REG_LCD_CURSOR_X_SIZE	= REG_LCD(0x56),
+	GLAMO_REG_LCD_CURSOR_Y_SIZE	= REG_LCD(0x58),
+	GLAMO_REG_LCD_CURSOR_X_POS	= REG_LCD(0x5a),
+	GLAMO_REG_LCD_CURSOR_Y_POS	= REG_LCD(0x5c),
+	GLAMO_REG_LCD_CURSOR_PRESET	= REG_LCD(0x5e),
+	GLAMO_REG_LCD_CURSOR_FG_COLOR	= REG_LCD(0x60),
+	/* RES */
+	GLAMO_REG_LCD_CURSOR_BG_COLOR	= REG_LCD(0x64),
+	/* RES */
+	GLAMO_REG_LCD_CURSOR_DST_COLOR	= REG_LCD(0x68),
+	/* RES */
+	GLAMO_REG_LCD_STATUS1		= REG_LCD(0x80),
+	GLAMO_REG_LCD_STATUS2		= REG_LCD(0x82),
+	GLAMO_REG_LCD_STATUS3		= REG_LCD(0x84),
+	GLAMO_REG_LCD_STATUS4		= REG_LCD(0x86),
+	/* RES */
+	GLAMO_REG_LCD_COMMAND1		= REG_LCD(0xa0),
+	GLAMO_REG_LCD_COMMAND2		= REG_LCD(0xa2),
+	/* RES */
+	GLAMO_REG_LCD_WFORM_DELAY1	= REG_LCD(0xb0),
+	GLAMO_REG_LCD_WFORM_DELAY2	= REG_LCD(0xb2),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_CORR	= REG_LCD(0x100),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_R_ENTRY01	= REG_LCD(0x110),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY23	= REG_LCD(0x112),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY45	= REG_LCD(0x114),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY67	= REG_LCD(0x116),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY8	= REG_LCD(0x118),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_G_ENTRY01	= REG_LCD(0x130),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY23	= REG_LCD(0x132),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY45	= REG_LCD(0x134),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY67	= REG_LCD(0x136),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY8	= REG_LCD(0x138),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_B_ENTRY01	= REG_LCD(0x150),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY23	= REG_LCD(0x152),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY45	= REG_LCD(0x154),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY67	= REG_LCD(0x156),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY8	= REG_LCD(0x158),
+	/* RES */
+	GLAMO_REG_LCD_SRAM_DRIVING1	= REG_LCD(0x160),
+	GLAMO_REG_LCD_SRAM_DRIVING2	= REG_LCD(0x162),
+	GLAMO_REG_LCD_SRAM_DRIVING3	= REG_LCD(0x164),
+};
+
+enum glamo_reg_lcd_mode1 {
+	GLAMO_LCD_MODE1_PWRSAVE		= 0x0001,
+	GLAMO_LCD_MODE1_PARTIAL_PRT	= 0x0002,
+	GLAMO_LCD_MODE1_HWFLIP		= 0x0004,
+	GLAMO_LCD_MODE1_LCD2		= 0x0008,
+	/* RES */
+	GLAMO_LCD_MODE1_PARTIAL_MODE	= 0x0020,
+	GLAMO_LCD_MODE1_CURSOR_DSTCOLOR	= 0x0040,
+	GLAMO_LCD_MODE1_PARTIAL_ENABLE	= 0x0080,
+	GLAMO_LCD_MODE1_TVCLK_IN_ENABLE	= 0x0100,
+	GLAMO_LCD_MODE1_HSYNC_HIGH_ACT	= 0x0200,
+	GLAMO_LCD_MODE1_VSYNC_HIGH_ACT	= 0x0400,
+	GLAMO_LCD_MODE1_HSYNC_FLIP	= 0x0800,
+	GLAMO_LCD_MODE1_GAMMA_COR_EN	= 0x1000,
+	GLAMO_LCD_MODE1_DITHER_EN	= 0x2000,
+	GLAMO_LCD_MODE1_CURSOR_EN	= 0x4000,
+	GLAMO_LCD_MODE1_ROTATE_EN	= 0x8000,
+};
+
+enum glamo_reg_lcd_mode2 {
+	GLAMO_LCD_MODE2_CRC_CHECK_EN	= 0x0001,
+	GLAMO_LCD_MODE2_DCMD_PER_LINE	= 0x0002,
+	GLAMO_LCD_MODE2_NOUSE_BDEF	= 0x0004,
+	GLAMO_LCD_MODE2_OUT_POS_MODE	= 0x0008,
+	GLAMO_LCD_MODE2_FRATE_CTRL_EN	= 0x0010,
+	GLAMO_LCD_MODE2_SINGLE_BUFFER	= 0x0020,
+	GLAMO_LCD_MODE2_SER_LSB_TO_MSB	= 0x0040,
+	/* FIXME */
+};
+
+enum glamo_reg_lcd_mode3 {
+	/* LCD color source data format */
+	GLAMO_LCD_SRC_RGB565		= 0x0000,
+	GLAMO_LCD_SRC_ARGB1555		= 0x4000,
+	GLAMO_LCD_SRC_ARGB4444		= 0x8000,
+	/* interface type */
+	GLAMO_LCD_MODE3_LCD		= 0x1000,
+	GLAMO_LCD_MODE3_RGB		= 0x0800,
+	GLAMO_LCD_MODE3_CPU		= 0x0000,
+	/* mode */
+	GLAMO_LCD_MODE3_RGB332		= 0x0000,
+	GLAMO_LCD_MODE3_RGB444		= 0x0100,
+	GLAMO_LCD_MODE3_RGB565		= 0x0200,
+	GLAMO_LCD_MODE3_RGB666		= 0x0300,
+	/* depth */
+	GLAMO_LCD_MODE3_6BITS		= 0x0000,
+	GLAMO_LCD_MODE3_8BITS		= 0x0010,
+	GLAMO_LCD_MODE3_9BITS		= 0x0020,
+	GLAMO_LCD_MODE3_16BITS		= 0x0030,
+	GLAMO_LCD_MODE3_18BITS		= 0x0040,
+};
+
+enum glamo_lcd_rot_mode {
+        GLAMO_LCD_ROT_MODE_0            = 0x0000,
+        GLAMO_LCD_ROT_MODE_180          = 0x2000,
+        GLAMO_LCD_ROT_MODE_MIRROR       = 0x4000,
+        GLAMO_LCD_ROT_MODE_FLIP         = 0x6000,
+        GLAMO_LCD_ROT_MODE_90           = 0x8000,
+        GLAMO_LCD_ROT_MODE_270          = 0xa000,
+};
+#define GLAMO_LCD_ROT_MODE_MASK         0xe000
+
+enum glamo_lcd_cmd_type {
+	GLAMO_LCD_CMD_TYPE_DISP		= 0x0000,
+	GLAMO_LCD_CMD_TYPE_PARALLEL	= 0x4000,
+	GLAMO_LCD_CMD_TYPE_SERIAL	= 0x8000,
+	GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT= 0xc000,
+};
+#define GLAMO_LCD_CMD_TYPE_MASK		0xc000
+
+enum glamo_lcd_cmds {
+	GLAMO_LCD_CMD_DATA_DISP_FIRE	= 0x00,
+	GLAMO_LCD_CMD_DATA_DISP_SYNC	= 0x01,		/* RGB only */
+	/* switch to command mode, no display */
+	GLAMO_LCD_CMD_DATA_FIRE_NO_DISP	= 0x02,
+	/* display until VSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_VSYNC	= 0x11,
+	/* display until HSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_HSYNC	= 0x12,
+	/* display until VSYNC, 1 black frame, VSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B	= 0x13,
+	/* don't care about display and switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_FREE	= 0x14,		/* RGB only */
+	/* don't care about display, keep data display but disable data,
+	 * and switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_FREE_D	= 0x15,		/* RGB only */
+};
+
+enum glamo_core_revisions {
+	GLAMO_CORE_REV_A0		= 0x0000,
+	GLAMO_CORE_REV_A1		= 0x0001,
+	GLAMO_CORE_REV_A2		= 0x0002,
+	GLAMO_CORE_REV_A3		= 0x0003,
+};
+
+#endif /* _GLAMO_REGS_H */
diff --git a/drivers/mfd/glamo/glamo-spi-gpio.c b/drivers/mfd/glamo/glamo-spi-gpio.c
new file mode 100644
index 0000000..73926bd
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-spi-gpio.c
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2007 OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Smedia Glamo GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver currently only implements a minimum subset of the hardware
+ * features, esp. those features that are required to drive the jbt6k74
+ * LCM controller asic in the TD028TTEC1 LCM.
+ *
+*/
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/glamo.h>
+
+#include <linux/glamofb.h>
+
+#include <asm/hardware.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+struct glamo_spigpio {
+	struct spi_bitbang		bitbang;
+	struct spi_master		*master;
+	struct glamo_spigpio_info	*info;
+	struct glamo_core		*glamo;
+};
+
+static inline struct glamo_spigpio *to_sg(struct spi_device *spi)
+{
+	return spi->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+	struct glamo_spigpio *sg = to_sg(dev);
+	glamo_gpio_setpin(sg->glamo, sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+	struct glamo_spigpio *sg = to_sg(dev);
+	glamo_gpio_setpin(sg->glamo, sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+	struct glamo_spigpio *sg = to_sg(dev);
+	if (sg->info->pin_miso)
+		return glamo_gpio_getpin(sg->glamo, sg->info->pin_miso) ? 1 : 0;
+	else
+		return 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 glamo_spigpio_txrx_mode0(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 glamo_spigpio_txrx_mode1(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 glamo_spigpio_txrx_mode2(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 glamo_spigpio_txrx_mode3(struct spi_device *spi,
+				    unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+
+#if 0
+static int glamo_spigpio_setupxfer(struct spi_device *spi,
+				   struct spi_transfer *t)
+{
+	struct glamo_spi *gs = to_sg(spi);
+	unsigned int bpw;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+
+	if (bpw != 9 && bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#endif
+
+static void glamo_spigpio_chipsel(struct spi_device *spi, int value)
+{
+	struct glamo_spigpio *gs = to_sg(spi);
+#if 0
+	dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
+		value, spi, gs, gs->info, gs->info->glamo);
+#endif
+	glamo_gpio_setpin(gs->glamo, gs->info->pin_cs, value ? 0 : 1);
+}
+
+
+static int glamo_spigpio_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct glamo_spigpio *sp;
+	int ret;
+	int i;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spigpio));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, sp);
+	sp->info = pdev->dev.platform_data;
+	if (!sp->info) {
+		dev_err(&pdev->dev, "can't operate without platform data\n");
+		ret = -EIO;
+		goto err_no_pdev;
+	}
+
+	master->num_chipselect = 1;
+	master->bus_num = 2; /* FIXME: use dynamic number */
+
+	sp->master = spi_master_get(master);
+	sp->glamo = sp->info->glamo;
+
+	sp->bitbang.master = sp->master;
+	sp->bitbang.chipselect = glamo_spigpio_chipsel;
+	sp->bitbang.txrx_word[SPI_MODE_0] = glamo_spigpio_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = glamo_spigpio_txrx_mode1;
+	sp->bitbang.txrx_word[SPI_MODE_2] = glamo_spigpio_txrx_mode2;
+	sp->bitbang.txrx_word[SPI_MODE_3] = glamo_spigpio_txrx_mode3;
+
+	/* set state of spi pins */
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0);
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0);
+	glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1);
+
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk);
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi);
+	glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs);
+	if (sp->info->pin_miso)
+		glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso);
+
+	/* bring the LCM panel out of reset if it isn't already */
+
+	glamo_gpio_setpin(sp->glamo, GLAMO_GPIO4, 1);
+	glamo_gpio_cfgpin(sp->glamo, GLAMO_GPIO4_OUTPUT);
+	msleep(90);
+
+#if 0
+	sp->dev = &pdev->dev;
+
+	sp->bitbang.setup_transfer = glamo_spi_setupxfer;
+	sp->bitbang.txrx_bufs = glamo_spi_txrx;
+	sp->bitbang.master->setup = glamo_spi_setup;
+#endif
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	/* register the chips to go with the board */
+
+	for (i = 0; i < sp->info->board_size; i++) {
+		dev_info(&pdev->dev, "registering %p: %s\n",
+			 &sp->info->board_info[i],
+			 sp->info->board_info[i].modalias);
+
+		sp->info->board_info[i].controller_data = sp;
+		spi_new_device(master, sp->info->board_info + i);
+	}
+
+	return 0;
+
+err_no_bitbang:
+	platform_set_drvdata(pdev, NULL);
+err_no_pdev:
+	spi_master_put(sp->bitbang.master);
+err:
+	return ret;
+
+}
+
+static int glamo_spigpio_remove(struct platform_device *pdev)
+{
+	struct glamo_spigpio *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+#define glamo_spigpio_suspend NULL
+#define glamo_spigpio_resume NULL
+
+static struct platform_driver glamo_spi_drv = {
+	.probe		= glamo_spigpio_probe,
+	.remove		= glamo_spigpio_remove,
+	.suspend	= glamo_spigpio_suspend,
+	.resume		= glamo_spigpio_resume,
+	.driver		= {
+		.name	= "glamo-spi-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init glamo_spi_init(void)
+{
+	return platform_driver_register(&glamo_spi_drv);
+}
+
+static void __exit glamo_spi_exit(void)
+{
+	platform_driver_unregister(&glamo_spi_drv);
+}
+
+module_init(glamo_spi_init);
+module_exit(glamo_spi_exit);
+
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
+MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index 996f654..9522cd1 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -155,9 +155,37 @@
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
 #ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#define _NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define _NR_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		_NR_IRQS
+#define IRQ_BOARD_END		(_NR_IRQS + 10)
+
+#if defined(CONFIG_MACH_NEO1973_GTA02)
+#define NR_IRQS			(IRQ_BOARD_END)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/* Neo1973 GTA02 interrupts */
+#define NEO1973_GTA02_IRQ(x)	(IRQ_BOARD_START + (x))
+#define IRQ_GLAMO(x)		NEO1973_GTA02_IRQ(x)
+#define IRQ_GLAMO_HOSTBUS	IRQ_GLAMO(0)
+#define IRQ_GLAMO_JPEG		IRQ_GLAMO(1)
+#define IRQ_GLAMO_MPEG		IRQ_GLAMO(2)
+#define IRQ_GLAMO_MPROC1	IRQ_GLAMO(3)
+#define IRQ_GLAMO_MPROC0	IRQ_GLAMO(4)
+#define IRQ_GLAMO_CMDQUEUE	IRQ_GLAMO(5)
+#define IRQ_GLAMO_2D		IRQ_GLAMO(6)
+#define IRQ_GLAMO_MMC		IRQ_GLAMO(7)
+#define IRQ_GLAMO_RISC		IRQ_GLAMO(8)
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/linux/glamo-gpio.h b/include/linux/glamo-gpio.h
new file mode 100644
index 0000000..d00f7e9
--- /dev/null
+++ b/include/linux/glamo-gpio.h
@@ -0,0 +1,99 @@
+#ifndef __GLAMO_GPIO_H
+#define __GLAMO_GPIO_H
+
+struct glamo_core;
+
+#define GLAMO_GPIO_BANKA	0x0000
+#define GLAMO_GPIO_BANKB	0x1000
+#define GLAMO_GPIO_BANKC	0x2000
+#define GLAMO_GPIO_BANKD	0x3000
+
+#define GLAMO_GPIONO(bank, pin)	((bank & 0xf000) | ((pin & 0xf) << 8))
+
+#define GLAMO_GPIO_F_IN		0x0010
+#define GLAMO_GPIO_F_OUT	0x0020
+#define GLAMO_GPIO_F_FUNC	0x0030
+
+#define GLAMO_GPIO0		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 0)
+#define GLAMO_GPIO0_INPUT	(GLAMO_GPIO0 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO0_OUTPUT	(GLAMO_GPIO0 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO0_HA20	(GLAMO_GPIO0 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO1		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 1)
+#define GLAMO_GPIO1_INPUT	(GLAMO_GPIO1 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO1_OUTPUT	(GLAMO_GPIO1 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO1_HA21	(GLAMO_GPIO1 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO2		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 2)
+#define GLAMO_GPIO2_INPUT	(GLAMO_GPIO2 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO2_OUTPUT	(GLAMO_GPIO2 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO2_HA22	(GLAMO_GPIO2 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO3		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 3)
+#define GLAMO_GPIO3_INPUT	(GLAMO_GPIO3 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO3_OUTPUT	(GLAMO_GPIO3 | GLAMO_GPIO_F_OUT)
+#define	GLAMO_GPIO3_HA23	(GLAMO_GPIO3 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO4		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 0)
+#define GLAMO_GPIO4_INPUT	(GLAMO_GPIO4 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO4_OUTPUT	(GLAMO_GPIO4 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO4_nLCS0	(GLAMO_GPIO4 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO5		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 1)
+#define GLAMO_GPIO5_INPUT	(GLAMO_GPIO5 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO5_OUTPUT	(GLAMO_GPIO5 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO5_nLCS1	(GLAMO_GPIO5 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO6		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 2)
+#define GLAMO_GPIO6_INPUT	(GLAMO_GPIO6 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO6_OUTPUT	(GLAMO_GPIO6 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO6_LDCLK	(GLAMO_GPIO6 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO7		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 3)
+#define GLAMO_GPIO7_INPUT	(GLAMO_GPIO7 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO7_OUTPUT	(GLAMO_GPIO7 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO7_nLDE	(GLAMO_GPIO7 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO8		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 0)
+#define GLAMO_GPIO8_INPUT	(GLAMO_GPIO8 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO8_OUTPUT	(GLAMO_GPIO8 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO8_LD16	(GLAMO_GPIO8 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO9		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 1)
+#define GLAMO_GPIO9_INPUT	(GLAMO_GPIO9 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO9_OUTPUT	(GLAMO_GPIO9 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO9_LD17	(GLAMO_GPIO9 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO10		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 2)
+#define GLAMO_GPIO10_INPUT	(GLAMO_GPIO10 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO10_OUTPUT	(GLAMO_GPIO10 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO10_LSCK	(GLAMO_GPIO10 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO11		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 3)
+#define GLAMO_GPIO11_INPUT	(GLAMO_GPIO11 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO11_OUTPUT	(GLAMO_GPIO11 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO11_LSDA	(GLAMO_GPIO11 | GLAMO_GPIO_F_FUNC)
+
+#define GLAMO_GPIO12		GLAMO_GPIONO(GLAMO_GPIO_BANKD, 0)
+#define GLAMO_GPIO12_INPUT	(GLAMO_GPIO12 | GLAMO_GPIO_F_IN)
+#define GLAMO_GPIO12_OUTPUT	(GLAMO_GPIO12 | GLAMO_GPIO_F_OUT)
+#define GLAMO_GPIO12_LSA0	(GLAMO_GPIO12 | GLAMO_GPIO_F_FUNC)
+
+
+#define REG_OF_GPIO(gpio)	(((gpio & 0xf000) >> 12)*2 \
+						+ GLAMO_REG_GPIO_GEN1)
+#define NUM_OF_GPIO(gpio)	((gpio & 0x0f00) >> 8)
+#define GPIO_OUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 0))
+#define OUTPUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 4))
+#define INPUT_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 8))
+#define FUNC_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 12))
+
+void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
+		       unsigned int value);
+
+int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin);
+
+void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc);
+
+
+#endif /* _GLAMO_GPIO */
diff --git a/include/linux/glamofb.h b/include/linux/glamofb.h
new file mode 100644
index 0000000..24742a2
--- /dev/null
+++ b/include/linux/glamofb.h
@@ -0,0 +1,39 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/spi/glamo.h>
+
+struct glamofb_val {
+	unsigned int defval;
+	unsigned int min;
+	unsigned int max;
+};
+
+struct glamo_core;
+
+struct glamofb_platform_data {
+	int width, height;
+	int pixclock;
+	int left_margin, right_margin;
+	int upper_margin, lower_margin;
+	int hsync_len, vsync_len;
+	int fb_mem_size;
+
+	struct glamofb_val xres;
+	struct glamofb_val yres;
+	struct glamofb_val bpp;
+
+	struct glamo_spi_info *spi_info;
+	struct glamo_spigpio_info *spigpio_info;
+	struct glamo_core *glamo;
+
+	/* glamo mmc platform specific info */
+	void		(*glamo_set_mci_power)(unsigned char power_mode,
+				     unsigned short vdd);
+	int		(*glamo_irq_is_wired)(void);
+};
+
+void glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#endif
diff --git a/include/linux/spi/glamo.h b/include/linux/spi/glamo.h
new file mode 100644
index 0000000..86419ea
--- /dev/null
+++ b/include/linux/spi/glamo.h
@@ -0,0 +1,28 @@
+#ifndef __GLAMO_SPI_H
+#define __GLAMO_SPI_H
+
+#include <linux/glamo-gpio.h>
+
+struct spi_board_info;
+struct glamofb_handle;
+struct glamo_core;
+
+struct glamo_spi_info {
+	unsigned long 		board_size;
+	struct spi_board_info	*board_info;
+	struct glamofb_handle	*glamofb_handle;
+};
+
+struct glamo_spigpio_info {
+	unsigned int		pin_clk;
+	unsigned int		pin_mosi;
+	unsigned int		pin_miso;
+	unsigned int 		pin_cs;
+
+	unsigned int		board_size;
+	struct spi_board_info	*board_info;
+	struct glamo_core	*glamo;
+};
+
+
+#endif
-- 
1.5.6.5