1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
|
From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
Date: Fri, 13 Nov 2020 16:11:32 +0100
Subject: [PATCH] net: phy: at803x: add support for SFP module in
RGMII-to-x-base mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: René van Dorst <opensource@vdorst.com>
---
drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -14,6 +14,8 @@
#include <linux/etherdevice.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
+#include <linux/sfp.h>
+#include <linux/phylink.h>
#define AT803X_SPECIFIC_STATUS 0x11
#define AT803X_SS_SPEED_MASK (3 << 14)
@@ -53,9 +55,18 @@
#define AT803X_MODE_CFG_MASK 0x0F
#define AT803X_MODE_CFG_SGMII 0x01
+#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02
+#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03
+#define AT803X_MODE_FIBER 0x01
+#define AT803X_MODE_COPPER 0x00
#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
#define AT803X_PSSR_MR_AN_COMPLETE 0x0200
+#define PSSR_LINK BIT(10)
+#define PSSR_SYNC_STATUS BIT(8)
+#define PSSR_DUPLEX BIT(13)
+#define PSSR_SPEED_1000 BIT(15)
+#define PSSR_SPEED_100 BIT(14)
#define AT803X_DEBUG_REG_0 0x00
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
@@ -243,10 +254,72 @@ static int at803x_resume(struct phy_devi
return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
}
+static int at803x_mode(struct phy_device *phydev)
+{
+ int mode;
+
+ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK;
+
+ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 ||
+ mode == AT803X_MODE_CFG_BX1000_RGMII_75)
+ return AT803X_MODE_FIBER;
+ return AT803X_MODE_COPPER;
+}
+
+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, };
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+ struct phy_device *phydev = upstream;
+ phy_interface_t iface;
+
+ phylink_set(at803x_support, 1000baseX_Full);
+ /* AT803x only support 1000baseX but SGMII works fine when module runs
+ * at 1Gbit.
+ */
+ phylink_set(at803x_support, 1000baseT_Full);
+
+ sfp_parse_support(phydev->sfp_bus, id, support);
+
+ // Limit to interfaces that both sides support
+ linkmode_and(support, support, at803x_support);
+
+ if (linkmode_empty(support))
+ goto unsupported_mode;
+
+ iface = sfp_select_interface(phydev->sfp_bus, support);
+
+ if (iface != PHY_INTERFACE_MODE_SGMII &&
+ iface != PHY_INTERFACE_MODE_1000BASEX)
+ goto unsupported_mode;
+
+ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface));
+
+ return 0;
+
+unsupported_mode:
+ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
+ "Only SGMII at 1Gbit/1000BASEX are supported!\n");
+ return -EINVAL;
+}
+
+static const struct sfp_upstream_ops at803x_sfp_ops = {
+ .attach = phy_sfp_attach,
+ .detach = phy_sfp_detach,
+ .module_insert = at803x_sfp_insert,
+};
+
static int at803x_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct at803x_priv *priv;
+ int ret;
+
+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
+ ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
+ if (ret < 0)
+ return ret;
+ }
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -394,6 +467,10 @@ static int at803x_read_status(struct phy
{
int ss, err, old_link = phydev->link;
+ /* Handle (Fiber) SGMII to RGMII mode */
+ if (at803x_mode(phydev) == AT803X_MODE_FIBER)
+ return genphy_c37_read_status(phydev);
+
/* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
if (err)
@@ -448,6 +525,19 @@ static int at803x_read_status(struct phy
return 0;
}
+static int at803x_config_aneg(struct phy_device *phydev)
+{
+ /* Handle (Fiber) SerDes to RGMII mode */
+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
+ pr_warn("%s: fiber\n", __func__);
+ return genphy_c37_config_aneg(phydev);
+ }
+
+ pr_warn("%s: enter\n", __func__);
+
+ return genphy_config_aneg(phydev);
+}
+
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
@@ -491,6 +581,7 @@ static struct phy_driver at803x_driver[]
.suspend = at803x_suspend,
.resume = at803x_resume,
/* PHY_GBIT_FEATURES */
+ .config_aneg = at803x_config_aneg,
.read_status = at803x_read_status,
.aneg_done = at803x_aneg_done,
.ack_interrupt = &at803x_ack_interrupt,
|
