// SPDX-License-Identifier: GPL-2.0
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "mediatek,mt7621-soc";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = ðernet;
};
chosen {
bootargs = "console=ttyS0,57600";
};
leds {
compatible = "gpio-leds";
led_power: power {
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
led_usb: usb {
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
led_internet: internet {
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
led_wifi: wifi {
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
reg_usb_vbus: regulator {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&xhci {
vbus-supply = <®_usb_vbus>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
ðernet {
mtd-mac-address = <&factory 0x4>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart3", "uart2", "jtag", "wdt";
ralink,function = "gpio";
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "SC PART_MAP";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "ubi";
reg = <0x600000 0x2800000>;
};
partition@2e00000 {
label = "reserved0";
reg = <0x2e00000 0x1800000>;
read-only;
};
factory: partition@4600000 {
label = "factory";
reg = <0x4600000 0x200000>;
read-only;
};
partition@4800000 {
label = "reserved1";
reg = <0x4800000 0x3800000>;
read-only;
};
};
};