blob: 234bdc26a11930eb18b398c5f590349c43c2efd7 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
|
define Build/MultiImage
rm -rf $@.fakerd $@.new
dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi -C $(1) \
-a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) -n '$(BOARD_NAME) initramfs' \
-d $@:$@.fakerd:$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.new
mv $@.new $@
rm -rf $@.fakerd
endef
define Device/aerohive_hiveap-330
DEVICE_VENDOR := Aerohive
DEVICE_MODEL := HiveAP-330
DEVICE_ALT0_VENDOR := Aerohive
DEVICE_ALT0_MODEL := HiveAP-350
DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-hwmon-lm70
BLOCKSIZE := 128k
KERNEL := kernel-bin | uImage none
KERNEL_INITRAMFS := kernel-bin | MultiImage none
KERNEL_SIZE := 16m
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \
append-rootfs | pad-rootfs | check-size | append-metadata
IMAGE_SIZE = 63m
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := \n$\
!The partitioning of the HiveAP 330 has changed! \n$\
To upgrade, please take a look at the install instructions over \
at the device's wiki: <https://openwrt.org/toh/aerohive/hiveap-330> \n$\
An abridged version for the console is provided here for comfort. \n$\
Run the following script into a shell on the device and retry this \
sysupgrade again: \n$\
cat <<- "EOF" > /tmp/uboot-fix.sh; sh /tmp/uboot-fix.sh \n$\
. /lib/functions.sh \n$\
. /lib/functions/system.sh \n$\
opkg update && opkg install uboot-envtools kmod-mtd-rw || exit 2 \n$\
insmod mtd-rw i_want_a_brick=y || exit 3 \n$\
echo "/dev/mtd$$$$(find_mtd_index u-boot-env) 0x0 0x20000 0x10000" > "/etc/fw_env.config" \n$\
fw_setenv owrt_boot 'setenv bootargs console=ttyS0,9600;bootm 0xEC040000 - 0xEC000000' \n$\
cp "/dev/mtd$$$$(find_mtd_index 'u-boot')" /tmp/uboot \n$\
cp /tmp/uboot /tmp/uboot_patched \n$\
strings -td < /tmp/uboot | grep '^ *[0-9]* *\\(run owrt_boot\\|setenv bootargs\\).*cp\\.l' | \n$\
awk '{print $$$$1}' | \n$\
while read offset; do \n$\
echo -n "run owrt_boot; " | dd of=/tmp/uboot_patched bs=1 seek=$$$${offset} conv=notrunc \n$\
done \n$\
mtd write /tmp/uboot_patched u-boot \n$\
uci set system.@system[0].compat_version=2.0; uci commit; \n$\
EOF \n$\
\n$\
Note that if this fails, you will need to use the serial console \n$\
to re-install OpenWrt. \n$\
Note that after this sysupgrade, the AP will be unavailable for 7 \n$\
minutes to reformat flash."
endef
TARGET_DEVICES += aerohive_hiveap-330
define Device/enterasys_ws-ap3710i
DEVICE_VENDOR := Enterasys
DEVICE_MODEL := WS-AP3710i
BLOCKSIZE := 128k
KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += enterasys_ws-ap3710i
define Device/extreme-networks_ws-ap3825i
DEVICE_VENDOR := Extreme Networks
DEVICE_MODEL := WS-AP3825i
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
BLOCKSIZE := 128k
DTB_SIZE := 20480
KERNEL = kernel-bin | lzma | dtb | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += extreme-networks_ws-ap3825i
define Device/ocedo_panda
DEVICE_VENDOR := OCEDO
DEVICE_MODEL := Panda
DEVICE_PACKAGES := kmod-rtc-ds1307
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
IMAGES := fdt.bin sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/fdt.bin := append-dtb
endef
TARGET_DEVICES += ocedo_panda
|
