1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
|
/*
* Aerohive HiveAP-330 Device Tree Source
*
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "Aerohive HiveAP-330";
compatible = "aerohive,hiveap-330";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_fault_red;
led-running = &led_power_green;
led-upgrade = &led_fault_red;
label-mac-device = &enet0;
spi0 = &spi0;
};
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x4000000>;
bank-width = <2>;
device-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
firmware@0 {
reg = <0x0 0x3f00000>;
label = "firmware";
/*
* This unknown/invalid compatible prevents
* openwrt's mtdsplit_fit to go off a tangent if it
* finds a magic value inside the uncompressed kernel
* at a blocksized aligned place.
*/
compatible = "areohive,hiveap-330-image";
};
partition@0 {
reg = <0x0 0x40000>;
label = "dtb";
};
partition@40000 {
compatible = "openwrt,uimage", "denx,uimage";
reg = <0x40000 0x3ec0000>;
label = "kernel";
};
partition@3f00000 {
reg = <0x3f00000 0x20000>;
label = "hw-info";
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_hwinfo_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
partition@3f20000 {
reg = <0x3f20000 0x20000>;
label = "boot-info";
read-only;
};
partition@3f40000 {
reg = <0x3f40000 0x20000>;
label = "boot-info-backup";
read-only;
};
partition@3f60000 {
reg = <0x3f60000 0x20000>;
label = "u-boot-env";
};
partition@3f80000 {
reg = <0x3f80000 0x80000>;
label = "u-boot";
read-only;
};
};
};
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
spi0: spi@7000 {
temperature-sensor@1 {
compatible = "ti,tmp125";
reg = <1>;
spi-max-frequency = <5000000>;
};
};
i2c@3100 {
tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
lp5521@32 {
compatible = "national,lp5521";
reg = <0x32>;
clock-mode = /bits/ 8 <2>;
#if 1
led_fault_red: led@0 {
reg = <0>;
chan-name = "fault:red";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_FAULT;
};
led_power_green: led@1 {
reg = <1>;
chan-name = "power:green";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
};
led@2{
reg = <2>;
chan-name = "blue";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
color = <LED_COLOR_ID_BLUE>;
};
#else
/*
* openwrt isn't ready to handle multi-intensity leds yet
* # echo 255 255 255 > /sys/class/leds/tricolor/multi_intensity
* # echo 255 > /sys/class/leds/tricolor/brightness
*/
rgbled-0 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RGB>;
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
chan-name = "tricolor";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
chan-name = "tricolor";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
color = <LED_COLOR_ID_GREEN>;
};
led@2{
reg = <2>;
chan-name = "tricolor";
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
color = <LED_COLOR_ID_BLUE>;
};
};
#endif
};
eeprom@51 {
/*
* 1Kbit I2C/SMBus EEPROM with SHA-1 Engine
* Aerohive calls it "dallas".
*/
compatible = "adi,ds28cn01";
reg = <0x51>;
read-only;
};
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x2>;
};
};
mdio@25000 {
status = "disabled";
};
mdio@26000 {
status = "disabled";
};
enet0: ethernet@b0000 {
status = "okay";
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
nvmem-cells = <&macaddr_hwinfo_0>;
nvmem-cell-names = "mac-address";
};
enet1: ethernet@b1000 {
status = "disabled";
};
enet2: ethernet@b2000 {
status = "okay";
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
nvmem-cells = <&macaddr_hwinfo_0>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
gpio0: gpio-controller@fc00 {
};
usb@22000 {
phy_type = "ulpi";
dr_mode = "host";
};
usb@23000 {
status = "disabled";
};
};
pci0: pcie@ffe09000 {
reg = <0x0 0xffe09000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0x0 0xffe0a000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
buttons {
compatible = "gpio-keys";
reset {
label = "Reset button";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
/include/ "fsl/p1020si-post.dtsi"
/*
* For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
* aliases to determine PCI domain numbers, drop aliases so as not to
* change the sysfs path of our wireless netdevs.
*/
/ {
aliases {
/delete-property/ pci0;
/delete-property/ pci1;
};
};
|
