aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape/patches-5.4/802-can-0019-can-flexcan-add-CAN-FD-mode-support.patch
blob: b6f8a3a3cf5ec194ee61be71a82356d6640de404 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
From 2aea13a107090d05e968d7d2aa3f72380a3f1b4c Mon Sep 17 00:00:00 2001
From: Joakim Zhang <qiangqing.zhang@nxp.com>
Date: Fri, 12 Jul 2019 08:02:44 +0000
Subject: [PATCH] can: flexcan: add CAN FD mode support

This patch intends to add CAN FD mode support in driver, it means that
payload size can extend up to 64 bytes.

Bit timing always set in CBT register other than CTRL1 register when
CANFD supports BRS, it will extend the range of all CAN bit timing
variables (PRESDIV, PROPSEG, PSEG1, PSEG2 and RJW), which will improve
the bit timing accuracy.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 247 ++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 218 insertions(+), 29 deletions(-)

--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -52,6 +52,7 @@
 #define FLEXCAN_MCR_IRMQ		BIT(16)
 #define FLEXCAN_MCR_LPRIO_EN		BIT(13)
 #define FLEXCAN_MCR_AEN			BIT(12)
+#define FLEXCAN_MCR_FDEN		BIT(11)
 /* MCR_MAXMB: maximum used MBs is MAXMB + 1 */
 #define FLEXCAN_MCR_MAXMB(x)		((x) & 0x7f)
 #define FLEXCAN_MCR_IDAM_A		(0x0 << 8)
@@ -137,6 +138,26 @@
 	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT | \
 	 FLEXCAN_ESR_WAK_INT)
 
+/* FLEXCAN Bit Timing register (CBT) bits */
+#define FLEXCAN_CBT_BTF			BIT(31)
+#define FLEXCAN_CBT_EPRESDIV(x)		(((x) & 0x3ff) << 21)
+#define FLEXCAN_CBT_ERJW(x)		(((x) & 0x0f) << 16)
+#define FLEXCAN_CBT_EPROPSEG(x)		(((x) & 0x3f) << 10)
+#define FLEXCAN_CBT_EPSEG1(x)		(((x) & 0x1f) << 5)
+#define FLEXCAN_CBT_EPSEG2(x)		((x) & 0x1f)
+
+/* FLEXCAN FD control register (FDCTRL) bits */
+#define FLEXCAN_FDCTRL_FDRATE		BIT(31)
+#define FLEXCAN_FDCTRL_MBDSR1(x)	(((x) & 0x3) << 19)
+#define FLEXCAN_FDCTRL_MBDSR0(x)	(((x) & 0x3) << 16)
+
+/* FLEXCAN FD Bit Timing register (FDCBT) bits */
+#define FLEXCAN_FDCBT_FPRESDIV(x)	(((x) & 0x3ff) << 20)
+#define FLEXCAN_FDCBT_FRJW(x)		(((x) & 0x07) << 16)
+#define FLEXCAN_FDCBT_FPROPSEG(x)	(((x) & 0x1f) << 10)
+#define FLEXCAN_FDCBT_FPSEG1(x)		(((x) & 0x07) << 5)
+#define FLEXCAN_FDCBT_FPSEG2(x)		((x) & 0x07)
+
 /* FLEXCAN interrupt flag register (IFLAG) bits */
 /* Errata ERR005829 step7: Reserve first valid MB */
 #define FLEXCAN_TX_MB_RESERVED_OFF_FIFO		8
@@ -161,6 +182,9 @@
 #define FLEXCAN_MB_CODE_TX_DATA		(0xc << 24)
 #define FLEXCAN_MB_CODE_TX_TANSWER	(0xe << 24)
 
+#define FLEXCAN_MB_CNT_EDL		BIT(31)
+#define FLEXCAN_MB_CNT_BRS		BIT(30)
+#define FLEXCAN_MB_CNT_ESI		BIT(29)
 #define FLEXCAN_MB_CNT_SRR		BIT(22)
 #define FLEXCAN_MB_CNT_IDE		BIT(21)
 #define FLEXCAN_MB_CNT_RTR		BIT(20)
@@ -192,6 +216,7 @@
 #define FLEXCAN_QUIRK_BROKEN_PERR_STATE	BIT(6) /* No interrupt for error passive */
 #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN	BIT(7) /* default to BE register access */
 #define FLEXCAN_QUIRK_SETUP_STOP_MODE		BIT(8) /* Setup stop mode to support wakeup */
+#define FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD	BIT(9) /* Use timestamp then support can fd mode */
 
 /* Structure of the message buffer */
 struct flexcan_mb {
@@ -225,7 +250,8 @@ struct flexcan_regs {
 	u32 crcr;		/* 0x44 */
 	u32 rxfgmask;		/* 0x48 */
 	u32 rxfir;		/* 0x4c */
-	u32 _reserved3[12];	/* 0x50 */
+	u32 cbt;		/* 0x50 */
+	u32 _reserved3[11];	/* 0x54 */
 	u8 mb[2][512];		/* 0x80 */
 	/* FIFO-mode:
 	 *			MB
@@ -250,6 +276,10 @@ struct flexcan_regs {
 	u32 rerrdr;		/* 0xaf4 */
 	u32 rerrsynr;		/* 0xaf8 */
 	u32 errsr;		/* 0xafc */
+	u32 _reserved7[64];	/* 0xb00 */
+	u32 fdctrl;		/* 0xc00 */
+	u32 fdcbt;		/* 0xc04 */
+	u32 fdcrc;		/* 0xc08 */
 };
 
 struct flexcan_devtype_data {
@@ -336,6 +366,30 @@ static const struct can_bittiming_const
 	.brp_inc = 1,
 };
 
+static const struct can_bittiming_const flexcan_fd_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 2,
+	.tseg1_max = 96,
+	.tseg2_min = 2,
+	.tseg2_max = 32,
+	.sjw_max = 16,
+	.brp_min = 1,
+	.brp_max = 1024,
+	.brp_inc = 1,
+};
+
+static const struct can_bittiming_const flexcan_fd_data_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 2,
+	.tseg1_max = 39,
+	.tseg2_min = 2,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 1024,
+	.brp_inc = 1,
+};
+
 /* FlexCAN module is essentially modelled as a little-endian IP in most
  * SoCs, i.e the registers as well as the message buffer areas are
  * implemented in a little-endian fashion.
@@ -630,7 +684,7 @@ static netdev_tx_t flexcan_start_xmit(st
 	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
 	u32 can_id;
 	u32 data;
-	u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | (cfd->len << 16);
+	u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | ((can_len2dlc(cfd->len)) << 16);
 	int i;
 
 	if (can_dropped_invalid_skb(dev, skb))
@@ -648,6 +702,9 @@ static netdev_tx_t flexcan_start_xmit(st
 	if (cfd->can_id & CAN_RTR_FLAG)
 		ctrl |= FLEXCAN_MB_CNT_RTR;
 
+	if (can_is_canfd_skb(skb))
+		ctrl |= FLEXCAN_MB_CNT_EDL;
+
 	for (i = 0; i < cfd->len; i += sizeof(u32)) {
 		data = be32_to_cpup((__be32 *)&cfd->data[i]);
 		priv->write(data, &priv->tx_mb->data[i / sizeof(u32)]);
@@ -858,7 +915,10 @@ static struct sk_buff *flexcan_mailbox_r
 		reg_ctrl = priv->read(&mb->can_ctrl);
 	}
 
-	skb = alloc_can_skb(offload->dev, (struct can_frame **)&cfd);
+	if (reg_ctrl & FLEXCAN_MB_CNT_EDL)
+		skb = alloc_canfd_skb(offload->dev, &cfd);
+	else
+		skb = alloc_can_skb(offload->dev, (struct can_frame **)&cfd);
 	if (unlikely(!skb)) {
 		skb = ERR_PTR(-ENOMEM);
 		goto mark_as_read;
@@ -873,9 +933,17 @@ static struct sk_buff *flexcan_mailbox_r
 	else
 		cfd->can_id = (reg_id >> 18) & CAN_SFF_MASK;
 
-	if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
-		cfd->can_id |= CAN_RTR_FLAG;
-	cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
+	if (reg_ctrl & FLEXCAN_MB_CNT_EDL) {
+		cfd->len = can_dlc2len(get_canfd_dlc((reg_ctrl >> 16) & 0xf));
+	} else {
+		cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
+
+		if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
+			cfd->can_id |= CAN_RTR_FLAG;
+	}
+
+	if (reg_ctrl & FLEXCAN_MB_CNT_ESI)
+		cfd->flags |= CANFD_ESI;
 
 	for (i = 0; i < cfd->len; i += sizeof(u32)) {
 		__be32 data = cpu_to_be32(priv->read(&mb->data[i / sizeof(u32)]));
@@ -1020,27 +1088,14 @@ static irqreturn_t flexcan_irq(int irq,
 
 static void flexcan_set_bittiming(struct net_device *dev)
 {
-	const struct flexcan_priv *priv = netdev_priv(dev);
-	const struct can_bittiming *bt = &priv->can.bittiming;
+	struct flexcan_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	struct can_bittiming *dbt = &priv->can.data_bittiming;
 	struct flexcan_regs __iomem *regs = priv->regs;
-	u32 reg;
+	u32 reg, reg_cbt, reg_fdcbt;
 
 	reg = priv->read(&regs->ctrl);
-	reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
-		 FLEXCAN_CTRL_RJW(0x3) |
-		 FLEXCAN_CTRL_PSEG1(0x7) |
-		 FLEXCAN_CTRL_PSEG2(0x7) |
-		 FLEXCAN_CTRL_PROPSEG(0x7) |
-		 FLEXCAN_CTRL_LPB |
-		 FLEXCAN_CTRL_SMP |
-		 FLEXCAN_CTRL_LOM);
-
-	reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
-		FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
-		FLEXCAN_CTRL_PSEG2(bt->phase_seg2 - 1) |
-		FLEXCAN_CTRL_RJW(bt->sjw - 1) |
-		FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
-
+	reg &= ~(FLEXCAN_CTRL_LPB | FLEXCAN_CTRL_SMP | FLEXCAN_CTRL_LOM);
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
 		reg |= FLEXCAN_CTRL_LPB;
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
@@ -1051,9 +1106,102 @@ static void flexcan_set_bittiming(struct
 	netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
 	priv->write(reg, &regs->ctrl);
 
-	/* print chip status */
-	netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
-		   priv->read(&regs->mcr), priv->read(&regs->ctrl));
+	if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
+		reg_cbt = priv->read(&regs->cbt);
+		reg_cbt &= ~(FLEXCAN_CBT_EPRESDIV(0x3ff) |
+			     FLEXCAN_CBT_EPSEG1(0x1f) |
+			     FLEXCAN_CBT_EPSEG2(0x1f) |
+			     FLEXCAN_CBT_ERJW(0x1f) |
+			     FLEXCAN_CBT_EPROPSEG(0x3f) |
+			     FLEXCAN_CBT_BTF);
+
+		/* CBT[EPSEG1] is 5 bit long and CBT[EPROPSEG] is 6 bit long.
+		 * The can_calc_bittiming tries to divide the tseg1 equally
+		 * between phase_seg1 and prop_seg, which may not fit in CBT
+		 * register. Therefore, if phase_seg1 is more than possible
+		 * value, increase prop_seg and decrease phase_seg1
+		 */
+		if (bt->phase_seg1 > 0x20) {
+			bt->prop_seg += (bt->phase_seg1 - 0x20);
+			bt->phase_seg1 = 0x20;
+		}
+
+		reg_cbt = FLEXCAN_CBT_EPRESDIV(bt->brp - 1) |
+				FLEXCAN_CBT_EPSEG1(bt->phase_seg1 - 1) |
+				FLEXCAN_CBT_EPSEG2(bt->phase_seg2 - 1) |
+				FLEXCAN_CBT_ERJW(bt->sjw - 1) |
+				FLEXCAN_CBT_EPROPSEG(bt->prop_seg - 1) |
+				FLEXCAN_CBT_BTF;
+		priv->write(reg_cbt, &regs->cbt);
+
+		netdev_dbg(dev, "bt: prediv %d seg1 %d seg2 %d rjw %d propseg %d\n",
+			   bt->brp - 1, bt->phase_seg1 - 1, bt->phase_seg2 - 1,
+			   bt->sjw - 1, bt->prop_seg - 1);
+
+		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+			reg_fdcbt = priv->read(&regs->fdcbt);
+			reg_fdcbt &= ~(FLEXCAN_FDCBT_FPRESDIV(0x3ff) |
+				       FLEXCAN_FDCBT_FPSEG1(0x07) |
+				       FLEXCAN_FDCBT_FPSEG2(0x07) |
+				       FLEXCAN_FDCBT_FRJW(0x07) |
+				       FLEXCAN_FDCBT_FPROPSEG(0x1f));
+
+			/* FDCBT[FPSEG1] is 3 bit long and FDCBT[FPROPSEG] is 5 bit long.
+			 * The can_calc_bittiming tries to divide the tseg1 equally
+			 * between phase_seg1 and prop_seg, which may not fit in FDCBT
+			 * register. Therefore, if phase_seg1 is more than possible
+			 * value, increase prop_seg and decrease phase_seg1
+			 */
+			if (dbt->phase_seg1 > 0x8) {
+				dbt->prop_seg += (dbt->phase_seg1 - 0x8);
+				dbt->phase_seg1 = 0x8;
+			}
+
+			reg_fdcbt = FLEXCAN_FDCBT_FPRESDIV(dbt->brp - 1) |
+					FLEXCAN_FDCBT_FPSEG1(dbt->phase_seg1 - 1) |
+					FLEXCAN_FDCBT_FPSEG2(dbt->phase_seg2 - 1) |
+					FLEXCAN_FDCBT_FRJW(dbt->sjw - 1) |
+					FLEXCAN_FDCBT_FPROPSEG(dbt->prop_seg);
+			priv->write(reg_fdcbt, &regs->fdcbt);
+
+			if (bt->brp != dbt->brp)
+				netdev_warn(dev, "Warning!! data brp = %d and brp = %d don't match.\n"
+					    "flexcan may not work. consider using different bitrate or data bitrate\n",
+					    dbt->brp, bt->brp);
+
+			netdev_dbg(dev, "fdbt: prediv %d seg1 %d seg2 %d rjw %d propseg %d\n",
+				   dbt->brp - 1, dbt->phase_seg1 - 1, dbt->phase_seg2 - 1,
+				   dbt->sjw - 1, dbt->prop_seg);
+
+			netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x cbt=0x%08x fdcbt=0x%08x\n",
+				   __func__, priv->read(&regs->mcr),
+				   priv->read(&regs->ctrl),
+				   priv->read(&regs->cbt),
+				   priv->read(&regs->fdcbt));
+		}
+	} else {
+		reg = priv->read(&regs->ctrl);
+		reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
+			 FLEXCAN_CTRL_RJW(0x3) |
+			 FLEXCAN_CTRL_PSEG1(0x7) |
+			 FLEXCAN_CTRL_PSEG2(0x7) |
+			 FLEXCAN_CTRL_PROPSEG(0x7));
+
+		reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
+			FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
+			FLEXCAN_CTRL_PSEG2(bt->phase_seg2 - 1) |
+			FLEXCAN_CTRL_RJW(bt->sjw - 1) |
+			FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
+		priv->write(reg, &regs->ctrl);
+
+		netdev_dbg(dev, "bt: prediv %d seg1 %d seg2 %d rjw %d propseg %d\n",
+			   bt->brp - 1, bt->phase_seg1 - 1, bt->phase_seg2 - 1,
+			   bt->sjw - 1, bt->prop_seg - 1);
+
+		/* print chip status */
+		netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
+			   priv->read(&regs->mcr), priv->read(&regs->ctrl));
+	}
 }
 
 /* flexcan_chip_start
@@ -1065,7 +1213,7 @@ static int flexcan_chip_start(struct net
 {
 	struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->regs;
-	u32 reg_mcr, reg_ctrl, reg_ctrl2, reg_mecr;
+	u32 reg_mcr, reg_ctrl, reg_ctrl2, reg_mecr, reg_fdctrl;
 	u64 reg_imask;
 	int err, i;
 	struct flexcan_mb __iomem *mb;
@@ -1162,6 +1310,26 @@ static int flexcan_chip_start(struct net
 	netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
 	priv->write(reg_ctrl, &regs->ctrl);
 
+	/* FDCTRL */
+	if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
+		reg_fdctrl = priv->read(&regs->fdctrl) & ~FLEXCAN_FDCTRL_FDRATE;
+		reg_fdctrl &= ~(FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3));
+		reg_mcr = priv->read(&regs->mcr) & ~FLEXCAN_MCR_FDEN;
+
+		/* support BRS when set CAN FD mode
+		 * 64 bytes payload per MB and 7 MBs per RAM block by default
+		 * enable CAN FD mode
+		 */
+		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+			reg_fdctrl |= FLEXCAN_FDCTRL_FDRATE;
+			reg_fdctrl |= FLEXCAN_FDCTRL_MBDSR1(0x3) | FLEXCAN_FDCTRL_MBDSR0(0x3);
+			reg_mcr |= FLEXCAN_MCR_FDEN;
+		}
+
+		priv->write(reg_fdctrl, &regs->fdctrl);
+		priv->write(reg_mcr, &regs->mcr);
+	}
+
 	if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
 		reg_ctrl2 = priv->read(&regs->ctrl2);
 		reg_ctrl2 |= FLEXCAN_CTRL2_EACEN | FLEXCAN_CTRL2_RRS;
@@ -1309,6 +1477,12 @@ static int flexcan_open(struct net_devic
 	struct flexcan_priv *priv = netdev_priv(dev);
 	int err;
 
+	if ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) &&
+	    (priv->can.ctrlmode & CAN_CTRLMODE_FD)) {
+		netdev_err(dev, "three samples mode and fd mode can't be used together\n");
+		return -EINVAL;
+	}
+
 	err = pm_runtime_get_sync(priv->dev);
 	if (err < 0)
 		return err;
@@ -1321,7 +1495,10 @@ static int flexcan_open(struct net_devic
 	if (err)
 		goto out_close;
 
-	priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+		priv->mb_size = sizeof(struct flexcan_mb) + CANFD_MAX_DLEN;
+	else
+		priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
 	priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
 			 (sizeof(priv->regs->mb[1]) / priv->mb_size);
 
@@ -1666,6 +1843,18 @@ static int flexcan_probe(struct platform
 	priv->devtype_data = devtype_data;
 	priv->reg_xceiver = reg_xceiver;
 
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_TIMESTAMP_SUPPORT_FD) {
+		if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+			priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
+			priv->can.bittiming_const = &flexcan_fd_bittiming_const;
+			priv->can.data_bittiming_const = &flexcan_fd_data_bittiming_const;
+		} else {
+			dev_err(&pdev->dev, "can fd mode can't work on fifo mode\n");
+			err = -EINVAL;
+			goto failed_register;
+		}
+	}
+
 	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);