1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
From 7a342f60e569047e1632f6af91f503993769a2ec Mon Sep 17 00:00:00 2001
From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Date: Tue, 17 Sep 2019 19:51:15 +0300
Subject: [PATCH] dpaa2-eth: Enable Rx PFC
Instruct the hardware to respond to received PFC frames.
Current firmware doesn't allow us to selectively enable PFC
on the Rx side for some priorities only, so we will react to
all incoming PFC frames (and stop transmitting on the traffic
classes specified in the frame).
PFC depends on the PAUSE flag also being set in link options.
Don't set it implicitly when user configures PFC, but issue
a warning if the two settings are not in sync.
For the Tx side, setting the PFC_PAUSE flag in the link options
is necessary but not sufficient, so PFC frame generation is
not enabled yet.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 23 +++++++++++++++++++++++
drivers/net/ethernet/freescale/dpaa2/dpni.h | 5 +++++
2 files changed, 28 insertions(+)
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -3613,6 +3613,9 @@ static int dpaa2_eth_dcbnl_ieee_getpfc(s
{
struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+ if (!(priv->link_state.options & DPNI_LINK_OPT_PFC_PAUSE))
+ return 0;
+
memcpy(pfc, &priv->pfc, sizeof(priv->pfc));
pfc->pfc_cap = dpaa2_eth_tc_count(priv);
@@ -3623,6 +3626,8 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
struct ieee_pfc *pfc)
{
struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+ struct dpni_link_cfg link_cfg = {0};
+ int err;
if (pfc->mbc || pfc->delay)
return -EOPNOTSUPP;
@@ -3631,6 +3636,24 @@ static int dpaa2_eth_dcbnl_ieee_setpfc(s
if (priv->pfc.pfc_en == pfc->pfc_en)
return 0;
+ /* We allow PFC configuration even if it won't have any effect until
+ * general pause frames are enabled
+ */
+ if (!dpaa2_eth_rx_pause_enabled(priv->link_state.options))
+ netdev_warn(net_dev, "Pause support must be enabled in order for PFC to work!\n");
+
+ link_cfg.rate = priv->link_state.rate;
+ link_cfg.options = priv->link_state.options;
+ if (pfc->pfc_en)
+ link_cfg.options |= DPNI_LINK_OPT_PFC_PAUSE;
+ else
+ link_cfg.options &= ~DPNI_LINK_OPT_PFC_PAUSE;
+ err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &link_cfg);
+ if (err) {
+ netdev_err(net_dev, "dpni_set_link_cfg failed\n");
+ return err;
+ }
+
memcpy(&priv->pfc, pfc, sizeof(priv->pfc));
return 0;
--- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
@@ -514,6 +514,11 @@ int dpni_get_statistics(struct fsl_mc_io
#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL
/**
+ * Enable priority flow control pause frames
+ */
+#define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL
+
+/**
* struct - Structure representing DPNI link configuration
* @rate: Rate
* @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
|
