1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
From b94cbaaa2facfdc6aa49d6f323da251f9e91d4ba Mon Sep 17 00:00:00 2001
From: Xiaowei Bao <xiaowei.bao@nxp.com>
Date: Tue, 14 May 2019 18:17:31 +0800
Subject: [PATCH] arm64: dts: ls1028a: add flexspi nodes
Add fspi node property for LS1028A SoC for FlexSPI driver.
Property added for the FlexSPI controller and for the connected
slave device for the LS1028ARDB and LS1028AQDS target.
This is having one SPI-NOR flash device, mt35xu02g connected at
CS0.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 12 ++++++++++++
3 files changed, 42 insertions(+)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -222,6 +222,21 @@
phy-connection-type = "rgmii-id";
};
+&fspi {
+ status = "okay";
+ mt35xu02g: flash@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+ };
+};
+
&sai1 {
status = "okay";
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -168,6 +168,21 @@
};
};
+&fspi {
+ status = "okay";
+ mt35xu02g: flash@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+ };
+};
+
&duart0 {
status = "okay";
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -180,6 +180,18 @@
clocks = <&sysclk>;
};
+ fspi: spi@20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "FSPI", "FSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "fspi_en", "fspi";
+ };
+
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
|
