1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
From a6a86473350c7dcbae61afa1e926941d76ca17ed Mon Sep 17 00:00:00 2001
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Date: Thu, 20 Sep 2018 13:46:54 +0300
Subject: [PATCH] arm64: dts: ls104x: use a pseudo-bus to constrain usb dma
size
Wrap the usb controllers in an intermediate simple-bus and use it to
constrain the dma address size of these usb controllers to the 40 bits
that they generate toward the interconnect.
This is required because the SoC uses 48 bits address sizes and this
mismatch would lead to smmu context faults because the usb generates
40-bit addresses while the smmu page tables are populated with 48-bit
wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 82 ++++++++++++++------------
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 76 +++++++++++++-----------
2 files changed, 87 insertions(+), 71 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -726,43 +726,51 @@
<&clockgen 4 0>;
};
- usb0: usb3@2f00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x2f00000 0x0 0x10000>;
- interrupts = <0 60 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- configure-gfladj;
- };
+ usb_aux_bus: usb_aux_bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- usb1: usb3@3000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3000000 0x0 0x10000>;
- interrupts = <0 61 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- configure-gfladj;
- };
+ usb0: usb3@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
+ };
+
+ usb1: usb3@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <0 61 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
+ };
- usb2: usb3@3100000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 63 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- configure-gfladj;
+ usb2: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 63 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
+ };
};
sata: sata@3200000 {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -624,40 +624,48 @@
<&clockgen 4 1>;
};
- usb0: usb@2f00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x2f00000 0x0 0x10000>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- };
+ usb_aux_bus: usb_aux_bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- usb1: usb@3000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3000000 0x0 0x10000>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- };
+ usb0: usb@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ };
+
+ usb1: usb@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ };
- usb2: usb@3100000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
+ usb2: usb@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ };
};
sata: sata@3200000 {
|
