path: root/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch

From 0bafdb711c1a61fbe5bb5b4d4bb5e32425d95a72 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 16 Nov 2018 15:36:03 +0800
Subject: [PATCH] config: support layerscape
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is an integrated patch of config for layerscape

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Zhao Qiang  <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
 drivers/irqchip/Makefile                |  1 +
 drivers/net/ethernet/freescale/Kconfig  | 14 ++++----
 drivers/net/ethernet/freescale/Makefile |  3 ++
 drivers/ptp/Kconfig                     | 29 +++++++++++++++++
 drivers/soc/Kconfig                     |  1 +
 drivers/soc/fsl/Kconfig                 | 11 +++++++
 drivers/soc/fsl/Kconfig.arm             | 16 +++++++++
 drivers/soc/fsl/Makefile                |  3 ++
 drivers/soc/fsl/layerscape/Kconfig      | 10 ++++++
 drivers/soc/fsl/layerscape/Makefile     |  1 +
 drivers/staging/Kconfig                 |  4 +++
 drivers/staging/Makefile                |  2 ++
 drivers/staging/fsl-dpaa2/Kconfig       | 43 ++++++++++++++++++++++++-
 drivers/staging/fsl-dpaa2/Makefile      |  4 +++
 14 files changed, 135 insertions(+), 7 deletions(-)
 create mode 100644 drivers/soc/fsl/Kconfig.arm
 create mode 100644 drivers/soc/fsl/layerscape/Kconfig
 create mode 100644 drivers/soc/fsl/layerscape/Makefile

--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -80,3 +80,4 @@ obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
 obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o
+obj-$(CONFIG_QUICC_ENGINE)		+= irq-qeic.o
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -5,10 +5,11 @@
 config NET_VENDOR_FREESCALE
 	bool "Freescale devices"
 	default y
-	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
-		   M523x || M527x || M5272 || M528x || M520x || M532x || \
-		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
-		   ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || \
+		   PPC_MPC512x || M523x || M527x || M5272 || M528x || M520x || \
+		   M532x || ARCH_MXC || ARCH_MXS || \
+		   (PPC_MPC52xx && PPC_BESTCOMM) || ARCH_LAYERSCAPE || \
+		   COMPILE_TEST
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -73,7 +74,7 @@ config FSL_XGMAC_MDIO
 
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
-	depends on QUICC_ENGINE
+	depends on QUICC_ENGINE && FSL_SOC && PPC32
 	select FSL_PQ_MDIO
 	select PHYLIB
 	---help---
@@ -94,7 +95,8 @@ config GIANFAR
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
 	  and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
 	  on the 8540.
-
+source "drivers/net/ethernet/freescale/sdk_fman/Kconfig"
+source "drivers/net/ethernet/freescale/sdk_dpaa/Kconfig"
 source "drivers/net/ethernet/freescale/dpaa/Kconfig"
 
 endif # NET_VENDOR_FREESCALE
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -20,5 +20,8 @@ gianfar_driver-objs := gianfar.o \
 obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
 ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
 
+obj-$(if $(CONFIG_FSL_SDK_FMAN),y) += sdk_fman/
+obj-$(if $(CONFIG_FSL_SDK_DPAA_ETH),y) += sdk_dpaa/
+
 obj-$(CONFIG_FSL_FMAN) += fman/
 obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -55,6 +55,35 @@ config PTP_1588_CLOCK_GIANFAR
 	  To compile this driver as a module, choose M here: the module
 	  will be called gianfar_ptp.
 
+config PTP_1588_CLOCK_DPAA
+	tristate "Freescale DPAA as PTP clock"
+	depends on FSL_SDK_DPAA_ETH
+	select PTP_1588_CLOCK
+        select FSL_DPAA_TS
+        default n
+	help
+	  This driver adds support for using the DPAA 1588 timer module
+	  as a PTP clock. This clock is only useful if your PTP programs are
+	  getting hardware time stamps on the PTP Ethernet packets
+	  using the SO_TIMESTAMPING API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dpaa_ptp.
+
+config PTP_1588_CLOCK_DPAA2
+	tristate "Freescale DPAA2 as PTP clock"
+	depends on FSL_DPAA2_ETH
+	select PTP_1588_CLOCK
+	default y
+	help
+	  This driver adds support for using the DPAA2 1588 timer module
+	  as a PTP clock. This clock is only useful if your PTP programs are
+	  getting hardware time stamps on the PTP Ethernet packets
+	  using the SO_TIMESTAMPING API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dpaa2-rtc.
+
 config PTP_1588_CLOCK_IXP46X
 	tristate "Intel IXP46x as PTP clock"
 	depends on IXP4XX_ETH
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -5,6 +5,7 @@ source "drivers/soc/amlogic/Kconfig"
 source "drivers/soc/atmel/Kconfig"
 source "drivers/soc/bcm/Kconfig"
 source "drivers/soc/fsl/Kconfig"
+source "drivers/soc/fsl/ls2-console/Kconfig"
 source "drivers/soc/imx/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -16,3 +16,14 @@ config FSL_GUTS
 	  Initially only reading SVR and registering soc device are supported.
 	  Other guts accesses, such as reading RCW, should eventually be moved
 	  into this driver as well.
+
+config FSL_SLEEP_FSM
+	bool
+	help
+	  This driver configures a hardware FSM (Finite State Machine) for deep sleep.
+	  The FSM is used to finish clean-ups at the last stage of system entering deep
+	  sleep, and also wakes up system when a wake up event happens.
+
+if ARM || ARM64
+source "drivers/soc/fsl/Kconfig.arm"
+endif
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig.arm
@@ -0,0 +1,16 @@
+#
+# Freescale ARM SOC Drivers
+#
+
+config LS_SOC_DRIVERS
+	bool "Layerscape Soc Drivers"
+	depends on ARCH_LAYERSCAPE || SOC_LS1021A
+	default n
+	help
+	Say y here to enable Freescale Layerscape Soc Device Drivers support.
+	The Soc Drivers provides the device driver that is a specific block
+	or feature on Layerscape platform.
+
+if LS_SOC_DRIVERS
+	source "drivers/soc/fsl/layerscape/Kconfig"
+endif
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,3 +6,6 @@ obj-$(CONFIG_FSL_DPAA)                 +
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
 obj-$(CONFIG_FSL_GUTS)			+= guts.o
+obj-$(CONFIG_FSL_LS2_CONSOLE)		+= ls2-console/
+obj-$(CONFIG_LS_SOC_DRIVERS)		+= layerscape/
+obj-$(CONFIG_FSL_SLEEP_FSM)	+= sleep_fsm.o
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/Kconfig
@@ -0,0 +1,10 @@
+#
+# Layerscape Soc drivers
+#
+config  FTM_ALARM
+	bool "FTM alarm driver"
+	default n
+	help
+	Say y here to enable FTM alarm support.  The FTM alarm provides
+	alarm functions for wakeup system from deep sleep.  There is only
+	one FTM can be used in ALARM(FTM 0).
--- /dev/null
+++ b/drivers/soc/fsl/layerscape/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_FTM_ALARM) += ftm_alarm.o
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -118,4 +118,8 @@ source "drivers/staging/vboxvideo/Kconfi
 
 source "drivers/staging/pi433/Kconfig"
 
+source "drivers/staging/fsl_qbman/Kconfig"
+
+source "drivers/staging/fsl_ppfe/Kconfig"
+
 endif # STAGING
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -50,3 +50,5 @@ obj-$(CONFIG_BCM2835_VCHIQ)	+= vc04_serv
 obj-$(CONFIG_CRYPTO_DEV_CCREE)	+= ccree/
 obj-$(CONFIG_DRM_VBOXVIDEO)	+= vboxvideo/
 obj-$(CONFIG_PI433)		+= pi433/
+obj-$(CONFIG_FSL_SDK_DPA)      += fsl_qbman/
+obj-$(CONFIG_FSL_PPFE)		+= fsl_ppfe/
--- a/drivers/staging/fsl-dpaa2/Kconfig
+++ b/drivers/staging/fsl-dpaa2/Kconfig
@@ -4,7 +4,7 @@
 
 config FSL_DPAA2
 	bool "Freescale DPAA2 devices"
-	depends on FSL_MC_BUS && ARCH_LAYERSCAPE
+	depends on FSL_MC_BUS
 	---help---
 	  Build drivers for Freescale DataPath Acceleration
 	  Architecture (DPAA2) family of SoCs.
@@ -16,3 +16,44 @@ config FSL_DPAA2_ETH
 	---help---
 	  Ethernet driver for Freescale DPAA2 SoCs, using the
 	  Freescale MC bus driver
+
+if FSL_DPAA2_ETH
+config FSL_DPAA2_ETH_USE_ERR_QUEUE
+	bool "Enable Rx error queue"
+	default n
+	---help---
+	  Allow Rx error frames to be enqueued on an error queue
+	  and processed by the driver (by default they are dropped
+	  in hardware).
+	  This may impact performance, recommended for debugging
+	  purposes only.
+
+# QBMAN_DEBUG requires some additional DPIO APIs
+config FSL_DPAA2_ETH_DEBUGFS
+	depends on DEBUG_FS
+	bool "Enable debugfs support"
+	default y
+	---help---
+	  Enable advanced statistics through debugfs interface.
+
+config FSL_DPAA2_ETH_DCB
+        bool "Data Center Bridging (DCB) Support"
+        default n
+        depends on DCB
+        ---help---
+          Say Y here if you want to use Data Center Bridging (DCB) features
+          (PFC) in the driver.
+
+          If unsure, say N.
+endif
+
+source "drivers/staging/fsl-dpaa2/mac/Kconfig"
+source "drivers/staging/fsl-dpaa2/evb/Kconfig"
+
+config FSL_DPAA2_ETHSW
+	tristate "Freescale DPAA2 Ethernet Switch"
+	depends on FSL_DPAA2
+	depends on NET_SWITCHDEV
+	---help---
+	Driver for Freescale DPAA2 Ethernet Switch. Select
+	BRIDGE to have support for bridge tools.
--- a/drivers/staging/fsl-dpaa2/Makefile
+++ b/drivers/staging/fsl-dpaa2/Makefile
@@ -3,3 +3,7 @@
 #
 
 obj-$(CONFIG_FSL_DPAA2_ETH)	+= ethernet/
+obj-$(CONFIG_FSL_DPAA2_MAC)	+= mac/
+obj-$(CONFIG_FSL_DPAA2_EVB)	+= evb/
+obj-$(CONFIG_PTP_1588_CLOCK_DPAA2) += rtc/
+obj-$(CONFIG_FSL_DPAA2_ETHSW)	+= ethsw/