aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
blob: 4071dc1e063f992c93b9753ee8595f0749a360a3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -0,0 +1,29 @@
+Lantiq Synchronous Serial Controller (SSC) SPI master driver
+
+Required properties:
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
+
+
+Optional properties:
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt, set to 8 if unset
+- base-cs: the number of the first chip select, set to 1 if unset.
+
+Example:
+
+
+spi: spi@E100800 {
+	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+	reg = <0xE100800 0x100>;
+	interrupt-parent = <&icu0>;
+	interrupts = <22 23 24>;
+	interrupt-names = "spi_rx", "spi_tx", "spi_err";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	num-cs = <6>;
+	base-cs = <1>;
+};
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -403,6 +403,14 @@ config SPI_NUC900
 	help
 	  SPI driver for Nuvoton NUC900 series ARM SoCs
 
+config SPI_LANTIQ_SSC
+	tristate "Lantiq SSC SPI controller"
+	depends on LANTIQ
+	help
+	  This driver supports the Lantiq SSC SPI controller in master
+	  mode. This controller is found on Intel (former Lantiq) SoCs like
+	  the Danube, Falcon, xRX200, xRX300.
+
 config SPI_OC_TINY
 	tristate "OpenCores tiny SPI"
 	depends on GPIOLIB || COMPILE_TEST
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-sp
 obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
 obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o
 obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
+obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
 obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
 obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
--- /dev/null
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -0,0 +1,952 @@
+/*
+ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+
+#include <lantiq_soc.h>
+
+#define SPI_RX_IRQ_NAME		"spi_rx"
+#define SPI_TX_IRQ_NAME		"spi_tx"
+#define SPI_ERR_IRQ_NAME	"spi_err"
+#define SPI_FRM_IRQ_NAME	"spi_frm"
+
+#define SPI_CLC			0x00
+#define SPI_PISEL		0x04
+#define SPI_ID			0x08
+#define SPI_CON			0x10
+#define SPI_STAT		0x14
+#define SPI_WHBSTATE		0x18
+#define SPI_TB			0x20
+#define SPI_RB			0x24
+#define SPI_RXFCON		0x30
+#define SPI_TXFCON		0x34
+#define SPI_FSTAT		0x38
+#define SPI_BRT			0x40
+#define SPI_BRSTAT		0x44
+#define SPI_SFCON		0x60
+#define SPI_SFSTAT		0x64
+#define SPI_GPOCON		0x70
+#define SPI_GPOSTAT		0x74
+#define SPI_FPGO		0x78
+#define SPI_RXREQ		0x80
+#define SPI_RXCNT		0x84
+#define SPI_DMACON		0xec
+#define SPI_IRNEN		0xf4
+#define SPI_IRNICR		0xf8
+#define SPI_IRNCR		0xfc
+
+#define SPI_CLC_SMC_S		16	/* Clock divider for sleep mode */
+#define SPI_CLC_SMC_M		(0xFF << SPI_CLC_SMC_S)
+#define SPI_CLC_RMC_S		8	/* Clock divider for normal run mode */
+#define SPI_CLC_RMC_M		(0xFF << SPI_CLC_RMC_S)
+#define SPI_CLC_DISS		BIT(1)	/* Disable status bit */
+#define SPI_CLC_DISR		BIT(0)	/* Disable request bit */
+
+#define SPI_ID_TXFS_S		24	/* Implemented TX FIFO size */
+#define SPI_ID_TXFS_M		(0x3F << SPI_ID_TXFS_S)
+#define SPI_ID_RXFS_S		16	/* Implemented RX FIFO size */
+#define SPI_ID_RXFS_M		(0x3F << SPI_ID_RXFS_S)
+#define SPI_ID_MOD_S		8	/* Module ID */
+#define SPI_ID_MOD_M		(0xff << SPI_ID_MOD_S)
+#define SPI_ID_CFG_S		5	/* DMA interface support */
+#define SPI_ID_CFG_M		(1 << SPI_ID_CFG_S)
+#define SPI_ID_REV_M		0x1F	/* Hardware revision number */
+
+#define SPI_CON_BM_S		16	/* Data width selection */
+#define SPI_CON_BM_M		(0x1F << SPI_CON_BM_S)
+#define SPI_CON_EM		BIT(24)	/* Echo mode */
+#define SPI_CON_IDLE		BIT(23)	/* Idle bit value */
+#define SPI_CON_ENBV		BIT(22)	/* Enable byte valid control */
+#define SPI_CON_RUEN		BIT(12)	/* Receive underflow error enable */
+#define SPI_CON_TUEN		BIT(11)	/* Transmit underflow error enable */
+#define SPI_CON_AEN		BIT(10)	/* Abort error enable */
+#define SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
+#define SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
+#define SPI_CON_LB		BIT(7)	/* Loopback control */
+#define SPI_CON_PO		BIT(6)	/* Clock polarity control */
+#define SPI_CON_PH		BIT(5)	/* Clock phase control */
+#define SPI_CON_HB		BIT(4)	/* Heading control */
+#define SPI_CON_RXOFF		BIT(1)	/* Switch receiver off */
+#define SPI_CON_TXOFF		BIT(0)	/* Switch transmitter off */
+
+#define SPI_STAT_RXBV_S		28
+#define SPI_STAT_RXBV_M		(0x7 << SPI_STAT_RXBV_S)
+#define SPI_STAT_BSY		BIT(13)	/* Busy flag */
+#define SPI_STAT_RUE		BIT(12)	/* Receive underflow error flag */
+#define SPI_STAT_TUE		BIT(11)	/* Transmit underflow error flag */
+#define SPI_STAT_AE		BIT(10)	/* Abort error flag */
+#define SPI_STAT_RE		BIT(9)	/* Receive error flag */
+#define SPI_STAT_TE		BIT(8)	/* Transmit error flag */
+#define SPI_STAT_ME		BIT(7)	/* Mode error flag */
+#define SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
+#define SPI_STAT_EN		BIT(0)	/* Enable bit */
+#define SPI_STAT_ERRORS		(SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
+				 SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
+
+#define SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
+#define SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
+#define SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
+#define SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
+#define SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error flag */
+#define SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
+#define SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
+#define SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
+#define SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
+#define SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
+#define SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
+#define SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
+#define SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
+#define SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
+#define SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
+#define SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
+#define SPI_WHBSTATE_CLR_ERRORS	(SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
+				 SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
+				 SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
+
+#define SPI_RXFCON_RXFITL_S	8	/* FIFO interrupt trigger level */
+#define SPI_RXFCON_RXFITL_M	(0x3F << SPI_RXFCON_RXFITL_S)
+#define SPI_RXFCON_RXFLU	BIT(1)	/* FIFO flush */
+#define SPI_RXFCON_RXFEN	BIT(0)	/* FIFO enable */
+
+#define SPI_TXFCON_TXFITL_S	8	/* FIFO interrupt trigger level */
+#define SPI_TXFCON_TXFITL_M	(0x3F << SPI_TXFCON_TXFITL_S)
+#define SPI_TXFCON_TXFLU	BIT(1)	/* FIFO flush */
+#define SPI_TXFCON_TXFEN	BIT(0)	/* FIFO enable */
+
+#define SPI_FSTAT_RXFFL_S	0
+#define SPI_FSTAT_RXFFL_M	(0x3f << SPI_FSTAT_RXFFL_S)
+#define SPI_FSTAT_TXFFL_S	8
+#define SPI_FSTAT_TXFFL_M	(0x3f << SPI_FSTAT_TXFFL_S)
+
+#define SPI_GPOCON_ISCSBN_S	8
+#define SPI_GPOCON_INVOUTN_S	0
+
+#define SPI_FGPO_SETOUTN_S	8
+#define SPI_FGPO_CLROUTN_S	0
+
+#define SPI_RXREQ_RXCNT_M	0xFFFF	/* Receive count value */
+#define SPI_RXCNT_TODO_M	0xFFFF	/* Recevie to-do value */
+
+#define SPI_IRNEN_TFI		BIT(4)	/* TX finished interrupt */
+#define SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
+#define SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
+#define SPI_IRNEN_T_XWAY	BIT(1)	/* Transmit end interrupt request */
+#define SPI_IRNEN_R_XWAY	BIT(0)	/* Receive end interrupt request */
+#define SPI_IRNEN_R_XRX		BIT(1)	/* Transmit end interrupt request */
+#define SPI_IRNEN_T_XRX		BIT(0)	/* Receive end interrupt request */
+#define SPI_IRNEN_ALL		0x1F
+
+struct lantiq_ssc_hwcfg {
+	unsigned int irnen_r;
+	unsigned int irnen_t;
+};
+
+struct lantiq_ssc_spi {
+	struct spi_master		*master;
+	struct device			*dev;
+	void __iomem			*regbase;
+	struct clk			*spi_clk;
+	struct clk			*fpi_clk;
+	const struct lantiq_ssc_hwcfg	*hwcfg;
+
+	spinlock_t			lock;
+
+	const u8			*tx;
+	u8				*rx;
+	unsigned int			tx_todo;
+	unsigned int			rx_todo;
+	unsigned int			bits_per_word;
+	unsigned int			speed_hz;
+	int				status;
+	unsigned int			tx_fifo_size;
+	unsigned int			rx_fifo_size;
+	unsigned int			base_cs;
+};
+
+static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg)
+{
+	return __raw_readl(spi->regbase + reg);
+}
+
+static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val,
+			      u32 reg)
+{
+	__raw_writel(val, spi->regbase + reg);
+}
+
+static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr,
+			     u32 set, u32 reg)
+{
+	u32 val = __raw_readl(spi->regbase + reg);
+
+	val &= ~clr;
+	val |= set;
+	__raw_writel(val, spi->regbase + reg);
+}
+
+static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
+{
+	u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+
+	return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
+}
+
+static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
+{
+	u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+
+	return fstat & SPI_FSTAT_RXFFL_M;
+}
+
+static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
+{
+	return spi->tx_fifo_size - tx_fifo_level(spi);
+}
+
+static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
+{
+	u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
+
+	val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
+	lantiq_ssc_writel(spi, val, SPI_RXFCON);
+}
+
+static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
+{
+	u32 val = 1 << SPI_TXFCON_TXFITL_S;
+
+	val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
+	lantiq_ssc_writel(spi, val, SPI_TXFCON);
+}
+
+static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
+}
+
+static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
+}
+
+static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
+}
+
+static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
+}
+
+static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
+			      unsigned int max_speed_hz)
+{
+	u32 spi_clk, brt;
+
+	/*
+	 * SPI module clock is derived from FPI bus clock dependent on
+	 * divider value in CLC.RMS which is always set to 1.
+	 *
+	 *                 f_SPI
+	 * baudrate = --------------
+	 *             2 * (BR + 1)
+	 */
+	spi_clk = clk_get_rate(spi->fpi_clk) / 2;
+
+	if (max_speed_hz > spi_clk)
+		brt = 0;
+	else
+		brt = spi_clk / max_speed_hz - 1;
+
+	if (brt > 0xFFFF)
+		brt = 0xFFFF;
+
+	dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
+		spi_clk, max_speed_hz, brt);
+
+	lantiq_ssc_writel(spi, brt, SPI_BRT);
+}
+
+static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
+				   unsigned int bits_per_word)
+{
+	u32 bm;
+
+	/* CON.BM value = bits_per_word - 1 */
+	bm = (bits_per_word - 1) << SPI_CON_BM_S;
+
+	lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
+}
+
+static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
+				unsigned int mode)
+{
+	u32 con_set = 0, con_clr = 0;
+
+	/*
+	 * SPI mode mapping in CON register:
+	 * Mode CPOL CPHA CON.PO CON.PH
+	 *  0    0    0      0      1
+	 *  1    0    1      0      0
+	 *  2    1    0      1      1
+	 *  3    1    1      1      0
+	 */
+	if (mode & SPI_CPHA)
+		con_clr |= SPI_CON_PH;
+	else
+		con_set |= SPI_CON_PH;
+
+	if (mode & SPI_CPOL)
+		con_set |= SPI_CON_PO | SPI_CON_IDLE;
+	else
+		con_clr |= SPI_CON_PO | SPI_CON_IDLE;
+
+	/* Set heading control */
+	if (mode & SPI_LSB_FIRST)
+		con_clr |= SPI_CON_HB;
+	else
+		con_set |= SPI_CON_HB;
+
+	/* Set loopback mode */
+	if (mode & SPI_LOOP)
+		con_set |= SPI_CON_LB;
+	else
+		con_clr |= SPI_CON_LB;
+
+	lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
+}
+
+static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
+{
+	const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg;
+
+	/*
+	 * Set clock divider for run mode to 1 to
+	 * run at same frequency as FPI bus
+	 */
+	lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
+
+	/* Put controller into config mode */
+	hw_enter_config_mode(spi);
+
+	/* Clear error flags */
+	lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+
+	/* Enable error checking, disable TX/RX */
+	lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
+		SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+
+	/* Setup default SPI mode */
+	hw_setup_bits_per_word(spi, spi->bits_per_word);
+	hw_setup_clock_mode(spi, SPI_MODE_0);
+
+	/* Enable master mode and clear error flags */
+	lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
+			       SPI_WHBSTATE);
+
+	/* Reset GPIO/CS registers */
+	lantiq_ssc_writel(spi, 0, SPI_GPOCON);
+	lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
+
+	/* Enable and flush FIFOs */
+	rx_fifo_reset(spi);
+	tx_fifo_reset(spi);
+
+	/* Enable interrupts */
+	lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
+			  SPI_IRNEN);
+}
+
+static int lantiq_ssc_setup(struct spi_device *spidev)
+{
+	struct spi_master *master = spidev->master;
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+	unsigned int cs = spidev->chip_select;
+	u32 gpocon;
+
+	/* GPIOs are used for CS */
+	if (gpio_is_valid(spidev->cs_gpio))
+		return 0;
+
+	dev_dbg(spi->dev, "using internal chipselect %u\n", cs);
+
+	if (cs < spi->base_cs) {
+		dev_err(spi->dev,
+			"chipselect %i too small (min %i)\n", cs, spi->base_cs);
+		return -EINVAL;
+	}
+
+	/* set GPO pin to CS mode */
+	gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
+
+	/* invert GPO pin */
+	if (spidev->mode & SPI_CS_HIGH)
+		gpocon |= 1 << (cs - spi->base_cs);
+
+	lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
+
+	return 0;
+}
+
+static int lantiq_ssc_prepare_message(struct spi_master *master,
+				      struct spi_message *message)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	hw_enter_config_mode(spi);
+	hw_setup_clock_mode(spi, message->spi->mode);
+	hw_enter_active_mode(spi);
+
+	return 0;
+}
+
+static void hw_setup_transfer(struct lantiq_ssc_spi *spi,
+			      struct spi_device *spidev, struct spi_transfer *t)
+{
+	unsigned int speed_hz = t->speed_hz;
+	unsigned int bits_per_word = t->bits_per_word;
+	u32 con;
+
+	if (bits_per_word != spi->bits_per_word ||
+		speed_hz != spi->speed_hz) {
+		hw_enter_config_mode(spi);
+		hw_setup_speed_hz(spi, speed_hz);
+		hw_setup_bits_per_word(spi, bits_per_word);
+		hw_enter_active_mode(spi);
+
+		spi->speed_hz = speed_hz;
+		spi->bits_per_word = bits_per_word;
+	}
+
+	/* Configure transmitter and receiver */
+	con = lantiq_ssc_readl(spi, SPI_CON);
+	if (t->tx_buf)
+		con &= ~SPI_CON_TXOFF;
+	else
+		con |= SPI_CON_TXOFF;
+
+	if (t->rx_buf)
+		con &= ~SPI_CON_RXOFF;
+	else
+		con |= SPI_CON_RXOFF;
+
+	lantiq_ssc_writel(spi, con, SPI_CON);
+}
+
+static int lantiq_ssc_unprepare_message(struct spi_master *master,
+					struct spi_message *message)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	/* Disable transmitter and receiver while idle */
+	lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+
+	return 0;
+}
+
+static void tx_fifo_write(struct lantiq_ssc_spi *spi)
+{
+	const u8 *tx8;
+	const u16 *tx16;
+	const u32 *tx32;
+	u32 data;
+	unsigned int tx_free = tx_fifo_free(spi);
+
+	while (spi->tx_todo && tx_free) {
+		switch (spi->bits_per_word) {
+		case 2 ... 8:
+			tx8 = spi->tx;
+			data = *tx8;
+			spi->tx_todo--;
+			spi->tx++;
+			break;
+		case 16:
+			tx16 = (u16 *) spi->tx;
+			data = *tx16;
+			spi->tx_todo -= 2;
+			spi->tx += 2;
+			break;
+		case 32:
+			tx32 = (u32 *) spi->tx;
+			data = *tx32;
+			spi->tx_todo -= 4;
+			spi->tx += 4;
+			break;
+		default:
+			WARN_ON(1);
+			data = 0;
+			break;
+		}
+
+		lantiq_ssc_writel(spi, data, SPI_TB);
+		tx_free--;
+	}
+}
+
+static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi)
+{
+	u8 *rx8;
+	u16 *rx16;
+	u32 *rx32;
+	u32 data;
+	unsigned int rx_fill = rx_fifo_level(spi);
+
+	while (rx_fill) {
+		data = lantiq_ssc_readl(spi, SPI_RB);
+
+		switch (spi->bits_per_word) {
+		case 2 ... 8:
+			rx8 = spi->rx;
+			*rx8 = data;
+			spi->rx_todo--;
+			spi->rx++;
+			break;
+		case 16:
+			rx16 = (u16 *) spi->rx;
+			*rx16 = data;
+			spi->rx_todo -= 2;
+			spi->rx += 2;
+			break;
+		case 32:
+			rx32 = (u32 *) spi->rx;
+			*rx32 = data;
+			spi->rx_todo -= 4;
+			spi->rx += 4;
+			break;
+		default:
+			WARN_ON(1);
+			break;
+		}
+
+		rx_fill--;
+	}
+}
+
+static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi)
+{
+	u32 data, *rx32;
+	u8 *rx8;
+	unsigned int rxbv, shift;
+	unsigned int rx_fill = rx_fifo_level(spi);
+
+	/*
+	 * In RX-only mode the bits per word value is ignored by HW. A value
+	 * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
+	 * If remaining RX bytes are less than 4, the FIFO must be read
+	 * differently. The amount of received and valid bytes is indicated
+	 * by STAT.RXBV register value.
+	 */
+	while (rx_fill) {
+		if (spi->rx_todo < 4)  {
+			rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
+				SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
+			data = lantiq_ssc_readl(spi, SPI_RB);
+
+			shift = (rxbv - 1) * 8;
+			rx8 = spi->rx;
+
+			while (rxbv) {
+				*rx8++ = (data >> shift) & 0xFF;
+				rxbv--;
+				shift -= 8;
+				spi->rx_todo--;
+				spi->rx++;
+			}
+		} else {
+			data = lantiq_ssc_readl(spi, SPI_RB);
+			rx32 = (u32 *) spi->rx;
+
+			*rx32++ = data;
+			spi->rx_todo -= 4;
+			spi->rx += 4;
+		}
+		rx_fill--;
+	}
+}
+
+static void rx_request(struct lantiq_ssc_spi *spi)
+{
+	unsigned int rxreq, rxreq_max;
+
+	/*
+	 * To avoid receive overflows at high clocks it is better to request
+	 * only the amount of bytes that fits into all FIFOs. This value
+	 * depends on the FIFO size implemented in hardware.
+	 */
+	rxreq = spi->rx_todo;
+	rxreq_max = spi->rx_fifo_size * 4;
+	if (rxreq > rxreq_max)
+		rxreq = rxreq_max;
+
+	lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
+}
+
+static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
+{
+	struct lantiq_ssc_spi *spi = data;
+
+	if (spi->tx) {
+		if (spi->rx && spi->rx_todo)
+			rx_fifo_read_full_duplex(spi);
+
+		if (spi->tx_todo)
+			tx_fifo_write(spi);
+		else if (!tx_fifo_level(spi))
+			goto completed;
+	} else if (spi->rx) {
+		if (spi->rx_todo) {
+			rx_fifo_read_half_duplex(spi);
+
+			if (spi->rx_todo)
+				rx_request(spi);
+			else
+				goto completed;
+		} else {
+			goto completed;
+		}
+	}
+
+	return IRQ_HANDLED;
+
+completed:
+	spi->status = 0;
+	spi_finalize_current_transfer(spi->master);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
+{
+	struct lantiq_ssc_spi *spi = data;
+	u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+
+	if (!(stat & SPI_STAT_ERRORS))
+		return IRQ_NONE;
+
+	if (stat & SPI_STAT_RUE)
+		dev_err(spi->dev, "receive underflow error\n");
+	if (stat & SPI_STAT_TUE)
+		dev_err(spi->dev, "transmit underflow error\n");
+	if (stat & SPI_STAT_AE)
+		dev_err(spi->dev, "abort error\n");
+	if (stat & SPI_STAT_RE)
+		dev_err(spi->dev, "receive overflow error\n");
+	if (stat & SPI_STAT_TE)
+		dev_err(spi->dev, "transmit overflow error\n");
+	if (stat & SPI_STAT_ME)
+		dev_err(spi->dev, "mode error\n");
+
+	/* Clear error flags */
+	lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+
+	/* set bad status so it can be retried */
+	spi->status = -EIO;
+	spi_finalize_current_transfer(spi->master);
+
+	return IRQ_HANDLED;
+}
+
+static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev,
+			  struct spi_transfer *t)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	spi->tx = t->tx_buf;
+	spi->rx = t->rx_buf;
+	spi->status = -EINPROGRESS;
+
+	if (t->tx_buf) {
+		spi->tx_todo = t->len;
+
+		/* initially fill TX FIFO */
+		tx_fifo_write(spi);
+	}
+
+	if (spi->rx) {
+		spi->rx_todo = t->len;
+
+		/* start shift clock in RX-only mode */
+		if (!spi->tx)
+			rx_request(spi);
+	}
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return t->len;
+}
+
+static int lantiq_ssc_transfer_status(struct spi_master *master,
+				      unsigned long timeout)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+	unsigned long end;
+
+	/*
+	 * The driver only gets an interrupt when the FIFO is empty, but there
+	 * is an additional shift register from which the data is written to
+	 * the wire. We get the last interrupt when the controller starts to
+	 * write the last word to the wire, not when it is finished. Do busy
+	 * waiting till it finishes.
+	 */
+	end = jiffies + timeout;
+	do {
+		u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+
+		if (!(stat & SPI_STAT_BSY))
+			return spi->status;
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, end));
+
+	return -ETIMEDOUT;
+}
+
+static void lantiq_ssc_handle_err(struct spi_master *master,
+				  struct spi_message *message)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	/* flush FIFOs on timeout */
+	rx_fifo_flush(spi);
+	tx_fifo_flush(spi);
+}
+
+static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master);
+	unsigned int cs = spidev->chip_select;
+	u32 fgpo;
+
+	if (!!(spidev->mode & SPI_CS_HIGH) == enable)
+		fgpo = (1 << (cs - spi->base_cs));
+	else
+		fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
+
+	lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
+}
+
+static int lantiq_ssc_transfer_one(struct spi_master *master,
+				   struct spi_device *spidev,
+				   struct spi_transfer *t)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	hw_setup_transfer(spi, spidev, t);
+
+	return transfer_start(spi, spidev, t);
+}
+
+static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
+	.irnen_r = SPI_IRNEN_R_XWAY,
+	.irnen_t = SPI_IRNEN_T_XWAY,
+};
+
+static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
+	.irnen_r = SPI_IRNEN_R_XRX,
+	.irnen_t = SPI_IRNEN_T_XRX,
+};
+
+static const struct of_device_id lantiq_ssc_match[] = {
+	{ .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, },
+	{ .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, },
+	{ .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lantiq_ssc_match);
+
+static int lantiq_ssc_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct resource *res;
+	struct lantiq_ssc_spi *spi;
+	const struct lantiq_ssc_hwcfg *hwcfg;
+	const struct of_device_id *match;
+	int err, rx_irq, tx_irq, err_irq;
+	u32 id, supports_dma, revision;
+	unsigned int num_cs;
+
+	match = of_match_device(lantiq_ssc_match, &pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "no device match\n");
+		return -EINVAL;
+	}
+	hwcfg = match->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get resources\n");
+		return -ENXIO;
+	}
+
+	rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
+	if (rx_irq < 0) {
+		dev_err(&pdev->dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
+		return -ENXIO;
+	}
+
+	tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
+	if (tx_irq < 0) {
+		dev_err(&pdev->dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
+		return -ENXIO;
+	}
+
+	err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
+	if (err_irq < 0) {
+		dev_err(&pdev->dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
+		return -ENXIO;
+	}
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct lantiq_ssc_spi));
+	if (!master)
+		return -ENOMEM;
+
+	spi = spi_master_get_devdata(master);
+	spi->master = master;
+	spi->dev = &pdev->dev;
+	spi->hwcfg = hwcfg;
+	platform_set_drvdata(pdev, spi);
+
+	spi->regbase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(spi->regbase)) {
+		err = PTR_ERR(spi->regbase);
+		goto err_master_put;
+	}
+
+	err = devm_request_irq(&pdev->dev, rx_irq, lantiq_ssc_xmit_interrupt,
+			       0, SPI_RX_IRQ_NAME, spi);
+	if (err)
+		goto err_master_put;
+
+	err = devm_request_irq(&pdev->dev, tx_irq, lantiq_ssc_xmit_interrupt,
+			       0, SPI_TX_IRQ_NAME, spi);
+	if (err)
+		goto err_master_put;
+
+	err = devm_request_irq(&pdev->dev, err_irq, lantiq_ssc_err_interrupt,
+			       0, SPI_ERR_IRQ_NAME, spi);
+	if (err)
+		goto err_master_put;
+
+	spi->spi_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi->spi_clk)) {
+		err = PTR_ERR(spi->spi_clk);
+		goto err_master_put;
+	}
+	err = clk_prepare_enable(spi->spi_clk);
+	if (err)
+		goto err_master_put;
+
+	spi->fpi_clk = clk_get_fpi();
+	if (IS_ERR(spi->fpi_clk)) {
+		err = PTR_ERR(spi->fpi_clk);
+		goto err_clk_disable;
+	}
+
+	num_cs = 8;
+	of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+	spi->base_cs = 1;
+	of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs);
+
+	spin_lock_init(&spi->lock);
+	spi->bits_per_word = 8;
+	spi->speed_hz = 0;
+
+	master->dev.of_node = pdev->dev.of_node;
+	master->num_chipselect = num_cs;
+	master->setup = lantiq_ssc_setup;
+	master->set_cs = lantiq_ssc_set_cs;
+	master->handle_err = lantiq_ssc_handle_err;
+	master->prepare_message = lantiq_ssc_prepare_message;
+	master->unprepare_message = lantiq_ssc_unprepare_message;
+	master->transfer_one = lantiq_ssc_transfer_one;
+	master->transfer_status = lantiq_ssc_transfer_status;
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH |
+				SPI_LOOP;
+	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) |
+				     SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
+
+	id = lantiq_ssc_readl(spi, SPI_ID);
+	spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
+	spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
+	supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
+	revision = id & SPI_ID_REV_M;
+
+	lantiq_ssc_hw_init(spi);
+
+	dev_info(&pdev->dev,
+		"Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n",
+		revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma);
+
+	err = devm_spi_register_master(&pdev->dev, master);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register spi_master\n");
+		goto err_clk_put;
+	}
+
+	return 0;
+
+err_clk_put:
+	clk_put(spi->fpi_clk);
+err_clk_disable:
+	clk_disable_unprepare(spi->spi_clk);
+err_master_put:
+	spi_master_put(master);
+
+	return err;
+}
+
+static int lantiq_ssc_remove(struct platform_device *pdev)
+{
+	struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
+
+	lantiq_ssc_writel(spi, 0, SPI_IRNEN);
+	lantiq_ssc_writel(spi, 0, SPI_CLC);
+	rx_fifo_flush(spi);
+	tx_fifo_flush(spi);
+	hw_enter_config_mode(spi);
+
+	clk_disable_unprepare(spi->spi_clk);
+	clk_put(spi->fpi_clk);
+
+	return 0;
+}
+
+static struct platform_driver lantiq_ssc_driver = {
+	.probe = lantiq_ssc_probe,
+	.remove = lantiq_ssc_remove,
+	.driver = {
+		.name = "spi-lantiq-ssc",
+		.owner = THIS_MODULE,
+		.of_match_table = lantiq_ssc_match,
+	},
+};
+module_platform_driver(lantiq_ssc_driver);
+
+MODULE_DESCRIPTION("Lantiq SSC SPI controller driver");
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>");
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spi-lantiq-ssc");