1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,6 +2,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -77,6 +78,63 @@
ranges;
compatible = "simple-bus";
+ rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <0 19 0>,
+ <0 21 0>,
+ <0 22 0>;
+ interrupt-names = "ack",
+ "err",
+ "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb208_s1a: smb208-s1a {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S1a>;
+
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+
+ };
+
+ smb208_s1b: smb208-s1b {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S1b>;
+
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: smb208-s2a {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S2a>;
+
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: smb208-s2b {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S2b>;
+
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+
qcom_pinmux: pinmux@800000 {
compatible = "qcom,ipq8064-pinctrl";
reg = <0x800000 0x4000>;
@@ -148,6 +206,12 @@
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
+
saw0: regulator@2089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
