blob: 77fa65e60e2105371bcb1d54c542c32a90747dc6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
#!/bin/sh
# Copyright (C) 2018 OpenWrt.org
#
. /lib/functions.sh
# The mtd partition 'ubi' and 'rootfs_1' on NAND flash are os-image
# partitions. These partitions are called as "Bank1/Bank2" in U-Boot
# on WXR-2533DHP, and they are checked conditions when booting.
# Then, U-Boot checks kernel and rootfs volumes in ubi, but U-Boot
# needs "ubi_rootfs" as rootfs volume name. And, U-Boot checks the
# checksum at the end of rootfs (ubi_rootfs).
# When U-Boot writes os-image into the Bank, only kernel, rootfs
# (ubi_rootfs) and rootfs_data (ubi_rootfs_data) volumes are wrote
# into the Bank. (not full ubi image)
#
# == U-Boot Behaviors ==
# - Bank1/Bank2 images are good, images are different
# -> writes os-image to Bank1 from Bank2
# (this behavior is used to firmware upgrade in stock firmware)
# - Bank1 image is broken (or checksum error)
# -> writes os-image to Bank1 from Bank2
# - Bank2 image is broken (or checksum error)
# -> writes os-image to Bank2 from Bank1
# - Bank1/Bank2 images are broken (or checksum error)
# -> start tftp
buffalo_upgrade_prepare_ubi() {
local ubidev="$( nand_find_ubi ubi )"
local mtdnum2="$( find_mtd_index rootfs_1 )"
if [ ! "$mtdnum2" ]; then
echo "cannot find second ubi mtd partition rootfs_1"
return 1
fi
local ubidev2="$( nand_find_ubi rootfs_1 )"
if [ ! "$ubidev2" ] && [ -n "$mtdnum2" ]; then
ubiattach -m "$mtdnum2"
ubidev2="$( nand_find_ubi rootfs_1 )"
fi
ubirmvol /dev/$ubidev -N ubi_rootfs_data &> /dev/null || true
ubirmvol /dev/$ubidev2 -N kernel &> /dev/null || true
}
|
