1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001
From: Robert Marko <robert.marko@sartura.hr>
Date: Wed, 7 Oct 2020 17:38:48 +0200
Subject: [PATCH] net: phy: Add Qualcom QCA807x driver
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s.
They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber.
Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber.
Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s.
But some vendors used these to driver generic LED-s controlled by userspace,
so lets enable registering each PHY as GPIO controller and add driver for it.
These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
drivers/net/phy/Kconfig | 6 ++++++
drivers/net/phy/Makefile | 1 +
2 files changed, 7 insertions(+)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -315,6 +315,12 @@ config AT803X_PHY
Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
QCA8337(Internal qca8k PHY) model
+config QCA807X_PHY
+ tristate "Qualcomm QCA807X PHYs"
+ depends on OF_MDIO
+ help
+ Currently supports the QCA8072 and QCA8075 models.
+
config QSEMI_PHY
tristate "Quality Semiconductor PHYs"
help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc/
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_QCA807X_PHY) += qca807x.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
|
