1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
|
From 234d6f40fb4b771b396b45a9492aab463771bd0b Mon Sep 17 00:00:00 2001
From: Kristian Evensen <kristian.evensen@gmail.com>
Date: Tue, 6 Aug 2019 11:42:57 +0200
Subject: [PATCH] phy: Add ipq40xx mdio driver
---
drivers/net/phy/Kconfig | 7 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-ipq40xx.c | 247 +++++++++++++++++++++++++++++++++
3 files changed, 255 insertions(+)
create mode 100644 drivers/net/phy/mdio-ipq40xx.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1f5fd24cd..eb71b47a3 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -436,6 +436,13 @@ config XILINX_GMII2RGMII
the Reduced Gigabit Media Independent Interface(RGMII) between
Ethernet physical media devices and the Gigabit Ethernet controller.
+config MDIO_IPQ40XX
+ tristate "Qualcomm Atheros ipq40xx MDIO interface"
+ depends on HAS_IOMEM && OF
+ ---help---
+ This driver supports the MDIO interface found in Qualcomm
+ Atheros ipq40xx Soc chip.
+
endif # PHYLIB
config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f21cda9d8..804c52634 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
diff --git a/drivers/net/phy/mdio-ipq40xx.c b/drivers/net/phy/mdio-ipq40xx.c
new file mode 100644
index 000000000..88fe5dc2b
--- /dev/null
+++ b/drivers/net/phy/mdio-ipq40xx.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/of_gpio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#define MDIO_CTRL_0_REG 0x40
+#define MDIO_CTRL_1_REG 0x44
+#define MDIO_CTRL_2_REG 0x48
+#define MDIO_CTRL_3_REG 0x4c
+#define MDIO_CTRL_4_REG 0x50
+#define MDIO_CTRL_4_ACCESS_BUSY BIT(16)
+#define MDIO_CTRL_4_ACCESS_START BIT(8)
+#define MDIO_CTRL_4_ACCESS_CODE_READ 0
+#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1
+#define CTRL_0_REG_DEFAULT_VALUE 0x150FF
+
+#define IPQ40XX_MDIO_RETRY 1000
+#define IPQ40XX_MDIO_DELAY 10
+
+struct ipq40xx_mdio_data {
+ struct mii_bus *mii_bus;
+ void __iomem *membase;
+ struct device *dev;
+};
+
+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am)
+{
+ int i;
+
+ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) {
+ unsigned int busy;
+
+ busy = readl(am->membase + MDIO_CTRL_4_REG) &
+ MDIO_CTRL_4_ACCESS_BUSY;
+ if (!busy)
+ return 0;
+
+ /* BUSY might take to be cleard by 15~20 times of loop */
+ udelay(IPQ40XX_MDIO_DELAY);
+ }
+
+ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name);
+
+ return -ETIMEDOUT;
+}
+
+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct ipq40xx_mdio_data *am = bus->priv;
+ int value = 0;
+ unsigned int cmd = 0;
+
+ lockdep_assert_held(&bus->mdio_lock);
+
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
+
+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ;
+
+ /* issue read command */
+ writel(cmd, am->membase + MDIO_CTRL_4_REG);
+
+ /* Wait read complete */
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ /* Read data */
+ value = readl(am->membase + MDIO_CTRL_3_REG);
+
+ return value;
+}
+
+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct ipq40xx_mdio_data *am = bus->priv;
+ unsigned int cmd = 0;
+
+ lockdep_assert_held(&bus->mdio_lock);
+
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
+
+ /* issue write data */
+ writel(value, am->membase + MDIO_CTRL_2_REG);
+
+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE;
+ /* issue write command */
+ writel(cmd, am->membase + MDIO_CTRL_4_REG);
+
+ /* Wait write complete */
+ if (ipq40xx_mdio_wait_busy(am))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ipq40xx_phy_reset(struct platform_device *pdev)
+{
+ struct device_node *mdio_node;
+ int phy_reset_gpio_number;
+ int ret;
+
+ mdio_node = of_find_node_by_name(NULL, "mdio");
+ if (!mdio_node) {
+ dev_err(&pdev->dev, "Could not find mdio node\n");
+ return -ENOENT;
+ }
+
+ ret = of_get_named_gpio(mdio_node, "phy-reset-gpio", 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not find phy-reset-gpio\n");
+ return ret;
+ }
+
+ phy_reset_gpio_number = ret;
+
+ ret = gpio_request(phy_reset_gpio_number, "phy-reset-gpio");
+ if (ret) {
+ dev_err(&pdev->dev, "Can't get phy-reset-gpio %d\n", ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(phy_reset_gpio_number, 0x0);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Can't set direction for phy-reset-gpio %d\n", ret);
+ goto phy_reset_out;
+ }
+
+ usleep_range(1000, 10005);
+
+ gpio_set_value(phy_reset_gpio_number, 0x01);
+
+phy_reset_out:
+ gpio_free(phy_reset_gpio_number);
+
+ return ret;
+}
+
+static int ipq40xx_mdio_probe(struct platform_device *pdev)
+{
+ struct ipq40xx_mdio_data *am;
+ struct resource *res;
+ int i, ret;
+
+ ret = ipq40xx_phy_reset(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not find qca8075 reset gpio\n");
+ return -ENODEV;
+ }
+
+ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL);
+ if (!am)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no iomem resource found\n");
+ return -ENXIO;
+ }
+
+ am->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(am->membase)) {
+ dev_err(&pdev->dev, "unable to ioremap registers\n");
+ return PTR_ERR(am->membase);
+ }
+
+ am->mii_bus = devm_mdiobus_alloc(&pdev->dev);
+ if (!am->mii_bus)
+ return -ENOMEM;
+
+ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG);
+
+ am->mii_bus->name = "ipq40xx_mdio";
+ am->mii_bus->read = ipq40xx_mdio_read;
+ am->mii_bus->write = ipq40xx_mdio_write;
+ am->mii_bus->priv = am;
+ am->mii_bus->parent = &pdev->dev;
+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
+
+ am->dev = &pdev->dev;
+ platform_set_drvdata(pdev, am);
+
+ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node);
+}
+
+static int ipq40xx_mdio_remove(struct platform_device *pdev)
+{
+ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(am->mii_bus);
+
+ return 0;
+}
+
+static const struct of_device_id ipq40xx_mdio_dt_ids[] = {
+ { .compatible = "qcom,ipq4019-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids);
+
+static struct platform_driver ipq40xx_mdio_driver = {
+ .probe = ipq40xx_mdio_probe,
+ .remove = ipq40xx_mdio_remove,
+ .driver = {
+ .name = "ipq40xx-mdio",
+ .of_match_table = ipq40xx_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(ipq40xx_mdio_driver);
+
+#define DRV_VERSION "1.0"
+
+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver");
+MODULE_AUTHOR("Qualcomm Atheros");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("Dual BSD/GPL");
--
2.20.1
|