path: root/target/linux/ipq40xx/patches-4.14/088-0010-i2c-qup-fix-buffer-overflow-for-multiple-msg-of-maxi.patch

From 6f2f0f6465acbd59391c43352ff0df77df1f01db Mon Sep 17 00:00:00 2001
From: Abhishek Sahu <absahu@codeaurora.org>
Date: Mon, 12 Mar 2018 18:44:59 +0530
Subject: [PATCH 10/13] i2c: qup: fix buffer overflow for multiple msg of
 maximum xfer len
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The BAM mode requires buffer for start tag data and tx, rx SG
list. Currently, this is being taken for maximum transfer length
(65K). But an I2C transfer can have multiple messages and each
message can be of this maximum length so the buffer overflow will
happen in this case. Since increasing buffer length won’t be
feasible since an I2C transfer can contain any number of messages
so this patch does following changes to make i2c transfers working
for multiple messages case.

1. Calculate the required buffers for 2 maximum length messages
   (65K * 2).
2. Split the descriptor formation and descriptor scheduling.
   The idea is to fit as many messages in one DMA transfers for 65K
   threshold value (max_xfer_sg_len). Whenever the sg_cnt is
   crossing this, then schedule the BAM transfer and subsequent
   transfer will again start from zero.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/i2c/busses/i2c-qup.c | 194 ++++++++++++++++++++---------------
 1 file changed, 110 insertions(+), 84 deletions(-)

--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -118,8 +118,12 @@
 #define ONE_BYTE			0x1
 #define QUP_I2C_MX_CONFIG_DURING_RUN   BIT(31)
 
+/* Maximum transfer length for single DMA descriptor */
 #define MX_TX_RX_LEN			SZ_64K
 #define MX_BLOCKS			(MX_TX_RX_LEN / QUP_READ_LIMIT)
+/* Maximum transfer length for all DMA descriptors */
+#define MX_DMA_TX_RX_LEN		(2 * MX_TX_RX_LEN)
+#define MX_DMA_BLOCKS			(MX_DMA_TX_RX_LEN / QUP_READ_LIMIT)
 
 /*
  * Minimum transfer timeout for i2c transfers in seconds. It will be added on
@@ -150,6 +154,7 @@ struct qup_i2c_bam {
 	struct	qup_i2c_tag tag;
 	struct	dma_chan *dma;
 	struct	scatterlist *sg;
+	unsigned int sg_cnt;
 };
 
 struct qup_i2c_dev {
@@ -188,6 +193,8 @@ struct qup_i2c_dev {
 	bool			is_dma;
 	/* To check if the current transfer is using DMA */
 	bool			use_dma;
+	unsigned int		max_xfer_sg_len;
+	unsigned int		tag_buf_pos;
 	struct			dma_pool *dpool;
 	struct			qup_i2c_tag start_tag;
 	struct			qup_i2c_bam brx;
@@ -692,102 +699,87 @@ static int qup_i2c_req_dma(struct qup_i2
 	return 0;
 }
 
-static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
-			       int num)
+static int qup_i2c_bam_make_desc(struct qup_i2c_dev *qup, struct i2c_msg *msg)
 {
-	struct dma_async_tx_descriptor *txd, *rxd = NULL;
-	int ret = 0, idx = 0, limit = QUP_READ_LIMIT;
-	dma_cookie_t cookie_rx, cookie_tx;
-	u32 len, blocks, rem;
-	u32 i, tlen, tx_len, tx_cnt = 0, rx_cnt = 0, off = 0;
+	int ret = 0, limit = QUP_READ_LIMIT;
+	u32 len = 0, blocks, rem;
+	u32 i = 0, tlen, tx_len = 0;
 	u8 *tags;
 
-	while (idx < num) {
-		tx_len = 0, len = 0, i = 0;
-
-		qup->is_last = (idx == (num - 1));
+	qup_i2c_set_blk_data(qup, msg);
 
-		qup_i2c_set_blk_data(qup, msg);
+	blocks = qup->blk.count;
+	rem = msg->len - (blocks - 1) * limit;
 
-		blocks = qup->blk.count;
-		rem = msg->len - (blocks - 1) * limit;
+	if (msg->flags & I2C_M_RD) {
+		while (qup->blk.pos < blocks) {
+			tlen = (i == (blocks - 1)) ? rem : limit;
+			tags = &qup->start_tag.start[qup->tag_buf_pos + len];
+			len += qup_i2c_set_tags(tags, qup, msg);
+			qup->blk.data_len -= tlen;
+
+			/* scratch buf to read the start and len tags */
+			ret = qup_sg_set_buf(&qup->brx.sg[qup->brx.sg_cnt++],
+					     &qup->brx.tag.start[0],
+					     2, qup, DMA_FROM_DEVICE);
 
-		if (msg->flags & I2C_M_RD) {
-			while (qup->blk.pos < blocks) {
-				tlen = (i == (blocks - 1)) ? rem : limit;
-				tags = &qup->start_tag.start[off + len];
-				len += qup_i2c_set_tags(tags, qup, msg);
-				qup->blk.data_len -= tlen;
-
-				/* scratch buf to read the start and len tags */
-				ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
-						     &qup->brx.tag.start[0],
-						     2, qup, DMA_FROM_DEVICE);
-
-				if (ret)
-					return ret;
-
-				ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
-						     &msg->buf[limit * i],
-						     tlen, qup,
-						     DMA_FROM_DEVICE);
-				if (ret)
-					return ret;
+			if (ret)
+				return ret;
 
-				i++;
-				qup->blk.pos = i;
-			}
-			ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
-					     &qup->start_tag.start[off],
-					     len, qup, DMA_TO_DEVICE);
+			ret = qup_sg_set_buf(&qup->brx.sg[qup->brx.sg_cnt++],
+					     &msg->buf[limit * i],
+					     tlen, qup,
+					     DMA_FROM_DEVICE);
 			if (ret)
 				return ret;
 
-			off += len;
-		} else {
-			while (qup->blk.pos < blocks) {
-				tlen = (i == (blocks - 1)) ? rem : limit;
-				tags = &qup->start_tag.start[off + tx_len];
-				len = qup_i2c_set_tags(tags, qup, msg);
-				qup->blk.data_len -= tlen;
-
-				ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
-						     tags, len,
-						     qup, DMA_TO_DEVICE);
-				if (ret)
-					return ret;
-
-				tx_len += len;
-				ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
-						     &msg->buf[limit * i],
-						     tlen, qup, DMA_TO_DEVICE);
-				if (ret)
-					return ret;
-				i++;
-				qup->blk.pos = i;
-			}
-			off += tx_len;
+			i++;
+			qup->blk.pos = i;
+		}
+		ret = qup_sg_set_buf(&qup->btx.sg[qup->btx.sg_cnt++],
+				     &qup->start_tag.start[qup->tag_buf_pos],
+				     len, qup, DMA_TO_DEVICE);
+		if (ret)
+			return ret;
 
-			if (idx == (num - 1)) {
-				len = 1;
-				if (rx_cnt) {
-					qup->btx.tag.start[0] =
-							QUP_BAM_INPUT_EOT;
-					len++;
-				}
-				qup->btx.tag.start[len - 1] =
-							QUP_BAM_FLUSH_STOP;
-				ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
-						     &qup->btx.tag.start[0],
-						     len, qup, DMA_TO_DEVICE);
-				if (ret)
-					return ret;
-			}
+		qup->tag_buf_pos += len;
+	} else {
+		while (qup->blk.pos < blocks) {
+			tlen = (i == (blocks - 1)) ? rem : limit;
+			tags = &qup->start_tag.start[qup->tag_buf_pos + tx_len];
+			len = qup_i2c_set_tags(tags, qup, msg);
+			qup->blk.data_len -= tlen;
+
+			ret = qup_sg_set_buf(&qup->btx.sg[qup->btx.sg_cnt++],
+					     tags, len,
+					     qup, DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+
+			tx_len += len;
+			ret = qup_sg_set_buf(&qup->btx.sg[qup->btx.sg_cnt++],
+					     &msg->buf[limit * i],
+					     tlen, qup, DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+			i++;
+			qup->blk.pos = i;
 		}
-		idx++;
-		msg++;
+
+		qup->tag_buf_pos += tx_len;
 	}
 
+	return 0;
+}
+
+static int qup_i2c_bam_schedule_desc(struct qup_i2c_dev *qup)
+{
+	struct dma_async_tx_descriptor *txd, *rxd = NULL;
+	int ret = 0;
+	dma_cookie_t cookie_rx, cookie_tx;
+	u32 len = 0;
+	u32 tx_cnt = qup->btx.sg_cnt, rx_cnt = qup->brx.sg_cnt;
+
 	/* schedule the EOT and FLUSH I2C tags */
 	len = 1;
 	if (rx_cnt) {
@@ -887,11 +879,19 @@ desc_err:
 	return ret;
 }
 
+static void qup_i2c_bam_clear_tag_buffers(struct qup_i2c_dev *qup)
+{
+	qup->btx.sg_cnt = 0;
+	qup->brx.sg_cnt = 0;
+	qup->tag_buf_pos = 0;
+}
+
 static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
 			    int num)
 {
 	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
 	int ret = 0;
+	int idx = 0;
 
 	enable_irq(qup->irq);
 	ret = qup_i2c_req_dma(qup);
@@ -914,9 +914,34 @@ static int qup_i2c_bam_xfer(struct i2c_a
 		goto out;
 
 	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+	qup_i2c_bam_clear_tag_buffers(qup);
+
+	for (idx = 0; idx < num; idx++) {
+		qup->msg = msg + idx;
+		qup->is_last = idx == (num - 1);
+
+		ret = qup_i2c_bam_make_desc(qup, qup->msg);
+		if (ret)
+			break;
+
+		/*
+		 * Make DMA descriptor and schedule the BAM transfer if its
+		 * already crossed the maximum length. Since the memory for all
+		 * tags buffers have been taken for 2 maximum possible
+		 * transfers length so it will never cross the buffer actual
+		 * length.
+		 */
+		if (qup->btx.sg_cnt > qup->max_xfer_sg_len ||
+		    qup->brx.sg_cnt > qup->max_xfer_sg_len ||
+		    qup->is_last) {
+			ret = qup_i2c_bam_schedule_desc(qup);
+			if (ret)
+				break;
+
+			qup_i2c_bam_clear_tag_buffers(qup);
+		}
+	}
 
-	qup->msg = msg;
-	ret = qup_i2c_bam_do_xfer(qup, qup->msg, num);
 out:
 	disable_irq(qup->irq);
 
@@ -1469,7 +1494,8 @@ static int qup_i2c_probe(struct platform
 		else if (ret != 0)
 			goto nodma;
 
-		blocks = (MX_BLOCKS << 1) + 1;
+		qup->max_xfer_sg_len = (MX_BLOCKS << 1);
+		blocks = (MX_DMA_BLOCKS << 1) + 1;
 		qup->btx.sg = devm_kzalloc(&pdev->dev,
 					   sizeof(*qup->btx.sg) * blocks,
 					   GFP_KERNEL);
@@ -1612,7 +1638,7 @@ nodma:
 	one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
 	qup->one_byte_t = one_bit_t * 9;
 	qup->xfer_timeout = TOUT_MIN * HZ +
-			    usecs_to_jiffies(MX_TX_RX_LEN * qup->one_byte_t);
+		usecs_to_jiffies(MX_DMA_TX_RX_LEN * qup->one_byte_t);
 
 	dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
 		qup->in_blk_sz, qup->in_fifo_sz,