blob: e439d19517639ed1c84a86c1d86d529756a50e8c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
|
From 29cd215aaf6c2050c43e4de03aee436c16f90b96 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 21 Nov 2019 17:27:14 +0000
Subject: [PATCH 643/660] net: sfp: remove incomplete 100BASE-FX and 100BASE-LX
support
The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this
is probably an incorrect assumption. In any case, sfp_parse_support()
will fail such a module. Let's stop pretending we support these
modules.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/sfp-bus.c | 4 +---
drivers/net/phy/sfp.c | 13 +------------
2 files changed, 2 insertions(+), 15 deletions(-)
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -342,9 +342,7 @@ phy_interface_t sfp_select_interface(str
if (phylink_test(link_modes, 2500baseX_Full))
return PHY_INTERFACE_MODE_2500BASEX;
- if (id->base.e1000_base_t ||
- id->base.e100_base_lx ||
- id->base.e100_base_fx)
+ if (id->base.e1000_base_t)
return PHY_INTERFACE_MODE_SGMII;
if (phylink_test(link_modes, 1000baseX_Full))
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1513,18 +1513,7 @@ static void sfp_sm_fault(struct sfp *sfp
static void sfp_sm_probe_for_phy(struct sfp *sfp)
{
- /* Setting the serdes link mode is guesswork: there's no
- * field in the EEPROM which indicates what mode should
- * be used.
- *
- * If it's a gigabit-only fiber module, it probably does
- * not have a PHY, so switch to 802.3z negotiation mode.
- * Otherwise, switch to SGMII mode (which is required to
- * support non-gigabit speeds) and probe for a PHY.
- */
- if (sfp->id.base.e1000_base_t ||
- sfp->id.base.e100_base_lx ||
- sfp->id.base.e100_base_fx)
+ if (sfp->id.base.e1000_base_t)
sfp_sm_probe_phy(sfp);
}
|
