1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
From 3d8592a23dd67fb78ad85ddf711a059d3880fcb4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 8 Nov 2019 17:19:16 +0000
Subject: [PATCH 654/660] net: phylink: make Broadcom BCM84881 based SFPs work
The Broadcom BCM84881 does not appear to send the SGMII control word
when operating in SGMII mode, which causes network adapters to fail
to link with the PHY, or decide to operate at fixed 1G speed, even if
the PHY negotiated 100M.
Work around this by detecting the Broadcom BCM84881 and switch to phy
mode rather than inband mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1787,12 +1787,22 @@ static void phylink_sfp_link_up(void *up
phylink_run_resolve(pl);
}
+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
+ * or 802.3z control word, so inband will not work.
+ */
+static bool phylink_phy_no_inband(struct phy_device *phy)
+{
+ return phy->is_c45 &&
+ (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
+}
+
static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
{
struct phylink *pl = upstream;
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
phy_interface_t interface;
+ u8 mode;
int ret;
/*
@@ -1807,8 +1817,13 @@ static int phylink_sfp_connect_phy(void
ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising);
+ if (phylink_phy_no_inband(phy))
+ mode = MLO_AN_PHY;
+ else
+ mode = MLO_AN_INBAND;
+
/* Do the initial configuration */
- ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising);
+ ret = phylink_sfp_config(pl, mode, supported, advertising);
if (ret < 0)
return ret;
|
