1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
From c546d49656143855093c7b7fde60866e6e23a69d Mon Sep 17 00:00:00 2001
From: Tomasz Duszynski <tduszyns@gmail.com>
Date: Tue, 18 Dec 2018 21:28:09 +0100
Subject: [PATCH] iio: chemical: sps30: add support for self cleaning
Self cleaning is especially useful in cases where sensor undergoes
frequent power on/off cycles. In such scenarios it is recommended to
turn self cleaning at least once per week in order to maintain reliable
measurements.
Self cleaning is activated by writing 1 to a dedicated attribute.
Internal fan accelerates to its maximum speed and keeps spinning
for about 10 seconds blowing out accumulated dust.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Tested-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Documentation/ABI/testing/sysfs-bus-iio-sps30 | 8 +++++
drivers/iio/chemical/sps30.c | 35 ++++++++++++++++++-
2 files changed, 42 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sps30
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-sps30
@@ -0,0 +1,8 @@
+What: /sys/bus/iio/devices/iio:deviceX/start_cleaning
+Date: December 2018
+KernelVersion: 4.22
+Contact: linux-iio@vger.kernel.org
+Description:
+ Writing 1 starts sensor self cleaning. Internal fan accelerates
+ to its maximum speed and keeps spinning for about 10 seconds in
+ order to blow out accumulated dust.
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -7,7 +7,6 @@
* I2C slave address: 0x69
*
* TODO:
- * - support for turning on fan cleaning
* - support for reading/setting auto cleaning interval
*/
@@ -37,6 +36,7 @@
#define SPS30_READ_DATA_READY_FLAG 0x0202
#define SPS30_READ_DATA 0x0300
#define SPS30_READ_SERIAL 0xd033
+#define SPS30_START_FAN_CLEANING 0x5607
enum {
PM1,
@@ -104,6 +104,7 @@ static int sps30_do_cmd(struct sps30_sta
break;
case SPS30_STOP_MEAS:
case SPS30_RESET:
+ case SPS30_START_FAN_CLEANING:
ret = sps30_write_then_read(state, buf, 2, NULL, 0);
break;
case SPS30_READ_DATA_READY_FLAG:
@@ -275,7 +276,39 @@ static int sps30_read_raw(struct iio_dev
return -EINVAL;
}
+static ssize_t start_cleaning_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct sps30_state *state = iio_priv(indio_dev);
+ int val, ret;
+
+ if (kstrtoint(buf, 0, &val) || val != 1)
+ return -EINVAL;
+
+ mutex_lock(&state->lock);
+ ret = sps30_do_cmd(state, SPS30_START_FAN_CLEANING, NULL, 0);
+ mutex_unlock(&state->lock);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_WO(start_cleaning, 0);
+
+static struct attribute *sps30_attrs[] = {
+ &iio_dev_attr_start_cleaning.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group sps30_attr_group = {
+ .attrs = sps30_attrs,
+};
+
static const struct iio_info sps30_info = {
+ .attrs = &sps30_attr_group,
.read_raw = sps30_read_raw,
};
|
