1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
|
From 14502b0564fc2e7181857de254a6f6bd07db4038 Mon Sep 17 00:00:00 2001
From: Matt Flax <flatmax@flatmax.org>
Date: Mon, 16 May 2016 21:36:31 +1000
Subject: [PATCH] New AudioInjector.net Pi soundcard with low jitter audio in
and out.
Contains the sound/soc/bcm ALSA machine driver and necessary alterations to the Kconfig and Makefile.
Adds the dts overlay and updates the Makefile and README.
Updates the relevant defconfig files to enable building for the Raspberry Pi.
Thanks to Phil Elwell (pelwell) for the review, simple-card concepts and discussion. Thanks to Clive Messer for overlay naming suggestions.
Added support for headphones, microphone and bclk_ratio settings.
This patch adds headphone and microphone capability to the Audio Injector sound card. The patch also sets the bit clock ratio for use in the bcm2835-i2s driver. The bcm2835-i2s can't handle an 8 kHz sample rate when the bit clock is at 12 MHz because its register is only 10 bits wide which can't represent the ch2 offset of 1508. For that reason, the rate constraint is added.
---
sound/soc/bcm/Kconfig | 7 ++
sound/soc/bcm/Makefile | 3 +
sound/soc/bcm/audioinjector-pi-soundcard.c | 193 +++++++++++++++++++++++++++++
3 files changed, 203 insertions(+)
create mode 100644 sound/soc/bcm/audioinjector-pi-soundcard.c
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -87,3 +87,10 @@ config SND_BCM2708_SOC_ADAU1977_ADC
select SND_SOC_ADAU1977_I2C
help
Say Y or M if you want to add support for ADAU1977 ADC.
+
+config SND_AUDIOINJECTOR_PI_SOUNDCARD
+ tristate "Support for audioinjector.net Pi add on soundcard"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_WM8731
+ help
+ Say Y or M if you want to add support for audioinjector.net Pi Hat
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -19,6 +19,7 @@ snd-soc-rpi-dac-objs := rpi-dac.o
snd-soc-rpi-proto-objs := rpi-proto.o
snd-soc-iqaudio-dac-objs := iqaudio-dac.o
snd-soc-raspidac3-objs := raspidac3.o
+snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
@@ -30,3 +31,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) +=
obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o
+obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
+
--- /dev/null
+++ b/sound/soc/bcm/audioinjector-pi-soundcard.c
@@ -0,0 +1,193 @@
+/*
+ * ASoC Driver for AudioInjector Pi add on soundcard
+ *
+ * Created on: 13-May-2016
+ * Author: flatmax@flatmax.org
+ * based on code by Cliff Cai <Cliff.Cai@analog.com> for the ssm2602 machine blackfin.
+ * with help from Lars-Peter Clausen for simplifying the original code to use the dai_fmt field.
+ * i2s_node code taken from the other sound/soc/bcm machine drivers.
+ *
+ * Copyright (C) 2016 Flatmax Pty. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+
+#include "../codecs/wm8731.h"
+
+static const unsigned int bcm2835_rates_12000000[] = {
+ 8000, 16000, 32000, 44100, 48000, 96000, 88200,
+};
+
+static struct snd_pcm_hw_constraint_list bcm2835_constraints_12000000 = {
+ .list = bcm2835_rates_12000000,
+ .count = ARRAY_SIZE(bcm2835_rates_12000000),
+};
+
+static int snd_audioinjector_pi_soundcard_startup(struct snd_pcm_substream *substream)
+{
+ /* Setup constraints, because there is a 12 MHz XTAL on the board */
+ snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &bcm2835_constraints_12000000);
+ return 0;
+}
+
+static int snd_audioinjector_pi_soundcard_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ switch (params_rate(params)){
+ case 8000:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 1);
+ case 16000:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 750);
+ case 32000:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 375);
+ case 44100:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 272);
+ case 48000:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 250);
+ case 88200:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 136);
+ case 96000:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125);
+ default:
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125);
+ }
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_audioinjector_pi_soundcard_ops = {
+ .startup = snd_audioinjector_pi_soundcard_startup,
+ .hw_params = snd_audioinjector_pi_soundcard_hw_params,
+};
+
+static int audioinjector_pi_soundcard_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+ return snd_soc_dai_set_sysclk(rtd->codec_dai, WM8731_SYSCLK_XTAL, 12000000, SND_SOC_CLOCK_IN);
+}
+
+static struct snd_soc_dai_link audioinjector_pi_soundcard_dai[] = {
+ {
+ .name = "AudioInjector audio",
+ .stream_name = "AudioInjector audio",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "wm8731-hifi",
+ .platform_name = "bcm2835-i2s.0",
+ .codec_name = "wm8731.1-001a",
+ .ops = &snd_audioinjector_pi_soundcard_ops,
+ .init = audioinjector_pi_soundcard_dai_init,
+ .dai_fmt = SND_SOC_DAIFMT_CBM_CFM|SND_SOC_DAIFMT_I2S|SND_SOC_DAIFMT_NB_NF,
+ },
+};
+
+static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+ SND_SOC_DAPM_LINE("Line In Jacks", NULL),
+ SND_SOC_DAPM_MIC("Microphone", NULL),
+};
+
+static const struct snd_soc_dapm_route audioinjector_audio_map[] = {
+ /* headphone connected to LHPOUT, RHPOUT */
+ {"Headphone Jack", NULL, "LHPOUT"},
+ {"Headphone Jack", NULL, "RHPOUT"},
+
+ /* speaker connected to LOUT, ROUT */
+ {"Ext Spk", NULL, "ROUT"},
+ {"Ext Spk", NULL, "LOUT"},
+
+ /* line inputs */
+ {"Line In Jacks", NULL, "Line Input"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"Microphone", NULL, "Mic Bias"},
+};
+
+static struct snd_soc_card snd_soc_audioinjector = {
+ .name = "audioinjector-pi-soundcard",
+ .dai_link = audioinjector_pi_soundcard_dai,
+ .num_links = ARRAY_SIZE(audioinjector_pi_soundcard_dai),
+
+ .dapm_widgets = wm8731_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets),
+ .dapm_routes = audioinjector_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audioinjector_audio_map),
+};
+
+static int audioinjector_pi_soundcard_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &snd_soc_audioinjector;
+ int ret;
+
+ card->dev = &pdev->dev;
+
+ if (pdev->dev.of_node) {
+ struct snd_soc_dai_link *dai = &audioinjector_pi_soundcard_dai[0];
+ struct device_node *i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ } else
+ if (!dai->cpu_of_node) {
+ dev_err(&pdev->dev, "Property 'i2s-controller' missing or invalid\n");
+ return -EINVAL;
+ }
+ }
+
+ if ((ret = snd_soc_register_card(card))) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+ }
+ return ret;
+}
+
+static int audioinjector_pi_soundcard_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ return snd_soc_unregister_card(card);
+
+}
+
+static const struct of_device_id audioinjector_pi_soundcard_of_match[] = {
+ { .compatible = "ai,audioinjector-pi-soundcard", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, audioinjector_pi_soundcard_of_match);
+
+static struct platform_driver audioinjector_pi_soundcard_driver = {
+ .driver = {
+ .name = "audioinjector-audio",
+ .owner = THIS_MODULE,
+ .of_match_table = audioinjector_pi_soundcard_of_match,
+ },
+ .probe = audioinjector_pi_soundcard_probe,
+ .remove = audioinjector_pi_soundcard_remove,
+};
+
+module_platform_driver(audioinjector_pi_soundcard_driver);
+MODULE_AUTHOR("Matt Flax <flatmax@flatmax.org>");
+MODULE_DESCRIPTION("AudioInjector.net Pi Soundcard");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:audioinjector-pi-soundcard");
+
|
