1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
|
From ade651419c0a60756b12bde37270de3aaede1545 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 8 Mar 2016 09:49:16 +0000
Subject: [PATCH 168/304] bcm2835-mmc: Only claim one DMA channel
With both MMC controllers enabled there are few DMA channels left. The
bcm2835-mmc driver only uses DMA in one direction at a time, so it
doesn't need to claim two channels.
See: https://github.com/raspberrypi/linux/issues/1327
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/bcm2708_common.dtsi | 5 +--
drivers/mmc/host/bcm2835-mmc.c | 69 +++++++++++++++++++++++++----------
2 files changed, 51 insertions(+), 23 deletions(-)
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -232,9 +232,8 @@
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
clocks = <&clk_mmc>;
- dmas = <&dma 11>,
- <&dma 11>;
- dma-names = "tx", "rx";
+ dmas = <&dma 11>;
+ dma-names = "rx-tx";
brcm,overclock-50 = <0>;
status = "disabled";
};
--- a/drivers/mmc/host/bcm2835-mmc.c
+++ b/drivers/mmc/host/bcm2835-mmc.c
@@ -108,8 +108,9 @@ struct bcm2835_host {
u32 shadow;
/*DMA part*/
- struct dma_chan *dma_chan_rx; /* DMA channel for reads */
- struct dma_chan *dma_chan_tx; /* DMA channel for writes */
+ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */
+ struct dma_slave_config dma_cfg_rx;
+ struct dma_slave_config dma_cfg_tx;
struct dma_async_tx_descriptor *tx_desc; /* descriptor */
bool have_dma;
@@ -342,7 +343,7 @@ static void bcm2835_mmc_dma_complete(voi
if (host->data && !(host->data->flags & MMC_DATA_WRITE)) {
/* otherwise handled in SDHCI IRQ */
- dma_chan = host->dma_chan_rx;
+ dma_chan = host->dma_chan_rxtx;
dir_data = DMA_FROM_DEVICE;
dma_unmap_sg(dma_chan->device->dev,
@@ -493,16 +494,21 @@ static void bcm2835_mmc_transfer_dma(str
if (host->blocks == 0)
return;
+ dma_chan = host->dma_chan_rxtx;
if (host->data->flags & MMC_DATA_READ) {
- dma_chan = host->dma_chan_rx;
dir_data = DMA_FROM_DEVICE;
dir_slave = DMA_DEV_TO_MEM;
} else {
- dma_chan = host->dma_chan_tx;
dir_data = DMA_TO_DEVICE;
dir_slave = DMA_MEM_TO_DEV;
}
+ /* The parameters have already been validated, so this will not fail */
+ (void)dmaengine_slave_config(dma_chan,
+ (dir_data == DMA_FROM_DEVICE) ?
+ &host->dma_cfg_rx :
+ &host->dma_cfg_tx);
+
BUG_ON(!dma_chan->device);
BUG_ON(!dma_chan->device->dev);
BUG_ON(!host->data->sg);
@@ -936,7 +942,7 @@ static void bcm2835_mmc_data_irq(struct
if (host->data->flags & MMC_DATA_WRITE) {
/* IRQ handled here */
- dma_chan = host->dma_chan_tx;
+ dma_chan = host->dma_chan_rxtx;
dir_data = DMA_TO_DEVICE;
dma_unmap_sg(dma_chan->device->dev,
host->data->sg, host->data->sg_len,
@@ -1316,28 +1322,47 @@ static int bcm2835_mmc_add_host(struct b
dev_info(dev, "Forcing PIO mode\n");
host->have_dma = false;
#else
- if (IS_ERR_OR_NULL(host->dma_chan_tx) ||
- IS_ERR_OR_NULL(host->dma_chan_rx)) {
- dev_err(dev, "%s: Unable to initialise DMA channels. Falling back to PIO\n",
+ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) {
+ dev_err(dev, "%s: Unable to initialise DMA channel. Falling back to PIO\n",
DRIVER_NAME);
host->have_dma = false;
} else {
- dev_info(dev, "DMA channels allocated");
- host->have_dma = true;
+ dev_info(dev, "DMA channel allocated");
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.slave_id = 11; /* DREQ channel */
+ /* Validate the slave configurations */
+
cfg.direction = DMA_MEM_TO_DEV;
cfg.src_addr = 0;
cfg.dst_addr = host->bus_addr + SDHCI_BUFFER;
- ret = dmaengine_slave_config(host->dma_chan_tx, &cfg);
- cfg.direction = DMA_DEV_TO_MEM;
- cfg.src_addr = host->bus_addr + SDHCI_BUFFER;
- cfg.dst_addr = 0;
- ret = dmaengine_slave_config(host->dma_chan_rx, &cfg);
+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg);
+
+ if (ret == 0) {
+ host->dma_cfg_tx = cfg;
+
+ cfg.direction = DMA_DEV_TO_MEM;
+ cfg.src_addr = host->bus_addr + SDHCI_BUFFER;
+ cfg.dst_addr = 0;
+
+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg);
+ }
+
+ if (ret == 0) {
+ host->dma_cfg_rx = cfg;
+
+ host->use_dma = true;
+ } else {
+ pr_err("%s: unable to configure DMA channel. "
+ "Faling back to PIO\n",
+ mmc_hostname(mmc));
+ dma_release_channel(host->dma_chan_rxtx);
+ host->dma_chan_rxtx = NULL;
+ host->use_dma = false;
+ }
}
#endif
mmc->max_segs = 128;
@@ -1416,16 +1441,20 @@ static int bcm2835_mmc_probe(struct plat
#ifndef FORCE_PIO
if (node) {
- host->dma_chan_tx = dma_request_slave_channel(dev, "tx");
- host->dma_chan_rx = dma_request_slave_channel(dev, "rx");
+ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx");
+ if (!host->dma_chan_rxtx)
+ host->dma_chan_rxtx =
+ dma_request_slave_channel(dev, "tx");
+ if (!host->dma_chan_rxtx)
+ host->dma_chan_rxtx =
+ dma_request_slave_channel(dev, "rx");
} else {
dma_cap_mask_t mask;
dma_cap_zero(mask);
/* we don't care about the channel, any would work */
dma_cap_set(DMA_SLAVE, mask);
- host->dma_chan_tx = dma_request_channel(mask, NULL, NULL);
- host->dma_chan_rx = dma_request_channel(mask, NULL, NULL);
+ host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL);
}
#endif
clk = devm_clk_get(dev, NULL);
|
