aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0741-dtoverlays-Add-an-overlay-for-the-Infineon-IRS1125.patch
blob: 1202d10d312bb240c0865c9fc8dc9b0bb9354432 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
From 89af5d7df7f548744bd675d96295c0f45e24b31f Mon Sep 17 00:00:00 2001
From: Markus Proeller <markus.proeller@pieye.org>
Date: Thu, 10 Oct 2019 19:13:02 +0200
Subject: [PATCH] dtoverlays: Add an overlay for the Infineon IRS1125

The Infineon IRS1125 is a CSI2 time of flight depth sensor
which has a suitable V4L2 subdevice driver.

Add an overlay for configuring it.

Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
---
 arch/arm/boot/dts/overlays/Makefile           |  1 +
 arch/arm/boot/dts/overlays/README             | 12 +++
 .../arm/boot/dts/overlays/irs1125-overlay.dts | 97 +++++++++++++++++++
 3 files changed, 110 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	iqaudio-dac.dtbo \
 	iqaudio-dacplus.dtbo \
 	iqaudio-digi-wm8804-audio.dtbo \
+	irs1125.dtbo \
 	jedec-spi-nor.dtbo \
 	justboom-dac.dtbo \
 	justboom-digi.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1347,6 +1347,18 @@ Params: card_name               Override
                                 dai stream name.
 
 
+Name:   irs1125
+Info:   Infineon irs1125 TOF camera module.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=irs1125,<param>=<val>
+Params: i2c_pins_0_1            Use pins 0&1 for the I2C instead of 44&45.
+                                Useful on Compute Modules.
+
+        i2c_pins_28_29          Use pins 28&29 for the I2C instead of 44&45.
+                                This is required for Pi B+, 2, 0, and 0W.
+
+
 Name:   jedec-spi-nor
 Info:   Adds support for JEDEC-compliant SPI NOR flash devices.  (Note: The
         "jedec,spi-nor" kernel driver was formerly known as "m25p80".)
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for IRS1125 camera module on VC I2C bus
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c_vc>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			irs1125: irs1125@3D {
+				compatible = "infineon,irs1125";
+				reg = <0x3D>;
+				status = "okay";
+
+				pwdn-gpios = <&gpio 5 0>;
+				clocks = <&irs1125_clk>;
+
+				irs1125_clk: camera-clk {
+					compatible = "fixed-clock";
+					#clock-cells = <0>;
+					clock-frequency = <26000000>;
+				};
+
+				port {
+					irs1125_0: endpoint {
+						remote-endpoint = <&csi1_ep>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+						clock-noncontinuous;
+						link-frequencies =
+							/bits/ 64 <297000000>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&csi1>;
+		__overlay__ {
+			status = "okay";
+
+			port {
+				csi1_ep: endpoint {
+					remote-endpoint = <&irs1125_0>;
+				};
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0_pins>;
+		__dormant__ {
+			brcm,pins = <28 29>;
+			brcm,function = <4>; /* alt0 */
+		};
+	};
+	fragment@3 {
+		target = <&i2c0_pins>;
+		__overlay__ {
+			brcm,pins = <44 45>;
+			brcm,function = <5>; /* alt1 */
+		};
+	};
+	fragment@4 {
+		target = <&i2c0_pins>;
+		__dormant__ {
+			brcm,pins = <0 1>;
+			brcm,function = <4>; /* alt0 */
+		};
+	};
+	fragment@5 {
+		target = <&i2c_vc>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@6 {
+		target-path="/__overrides__";
+		__overlay__ {
+			cam0-pwdn-ctrl = <&irs1125>,"pwdn-gpios:0";
+			cam0-pwdn      = <&irs1125>,"pwdn-gpios:4";
+		};
+	};
+
+	__overrides__ {
+		i2c_pins_0_1 = <0>,"-2-3+4";
+		i2c_pins_28_29 = <0>,"+2-3-4";
+	};
+};