aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0551-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch
blob: e60d125cdaa912ee763cb512e64827edb89d161b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
From 5353102f2d7e2f61cca4014aacfa3ac9a71aaeea Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.org>
Date: Fri, 17 May 2019 13:31:21 +0100
Subject: [PATCH 551/703] phy: bcm54213pe: configure the LED outputs to be more
 user-friendly

The default state was both LEDs indicating link speed.

Change the default configuration to
- Amber: 1000/100 link speed indication
- Green: link present + activity indication

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
---
 drivers/net/phy/broadcom.c | 17 +++++++++++++++++
 include/linux/brcmphy.h    |  4 ++++
 2 files changed, 21 insertions(+)

--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -52,6 +52,21 @@ static int bcm54210e_config_init(struct
 	return 0;
 }
 
+static void bcm54213pe_config_init(struct phy_device *phydev)
+{
+	u16 val;
+
+	/* Enable ACT+LINK indication on ACTIVITY trigger */
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_LEDCTL);
+	val |= BCM54XX_SHD_LEDCTL_ACTLINK_EN;
+	bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDCTL, val);
+
+	/* Set ACTIVITY on LED "1" output, LINKSPD[1] on LED "3" output */
+	val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
+		BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD1);
+	bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
+}
+
 static int bcm54612e_config_init(struct phy_device *phydev)
 {
 	int reg;
@@ -310,6 +325,8 @@ static int bcm54xx_config_init(struct ph
 		err = bcm54210e_config_init(phydev);
 		if (err)
 			return err;
+	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54213PE) {
+		bcm54213pe_config_init(phydev);
 	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
 		err = bcm54612e_config_init(phydev);
 		if (err)
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -168,6 +168,10 @@
 #define  BCM54XX_SHD_SCR3_DLLAPD_DIS	0x0002
 #define  BCM54XX_SHD_SCR3_TRDDAPD	0x0004
 
+/* 01001: Additional LED trigger options */
+#define BCM54XX_SHD_LEDCTL		0x09
+#define  BCM54XX_SHD_LEDCTL_ACTLINK_EN	0x0010
+
 /* 01010: Auto Power-Down */
 #define BCM54XX_SHD_APD			0x0a
 #define  BCM_APD_CLR_MASK		0xFE9F /* clear bits 5, 6 & 8 */