1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
|
From ea5d66b73d721b0a21d6b3eb677dd8f65cb8a3dd Mon Sep 17 00:00:00 2001
From: Hans-Wilhelm Warlo <5417271+hanswilw@users.noreply.github.com>
Date: Tue, 16 Oct 2018 18:20:48 +0200
Subject: [PATCH 177/725] Add hy28b 2017 model device tree overlay (#2721)
The 2017 version of the hy28b display requires a different
initialisation sequence.
Signed-off-by: Hans-Wilhelm Warlo <hw@warlo.no>
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 19 +++
.../boot/dts/overlays/hy28b-2017-overlay.dts | 152 ++++++++++++++++++
3 files changed, 172 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -49,6 +49,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
hifiberry-digi-pro.dtbo \
hy28a.dtbo \
hy28b.dtbo \
+ hy28b-2017.dtbo \
i2c-bcm2708.dtbo \
i2c-gpio.dtbo \
i2c-mux.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -770,6 +770,25 @@ Params: speed Display
ledgpio GPIO used to control backlight
+Name: hy28b-2017
+Info: HY28B 2017 version - 2.8" TFT LCD Display Module by HAOYU Electronics
+ Default values match Texy's display shield
+Load: dtoverlay=hy28b-2017,<param>=<val>
+Params: speed Display SPI bus speed
+
+ rotate Display rotation {0,90,180,270}
+
+ fps Delay between frame updates
+
+ debug Debug output level {0-7}
+
+ xohms Touchpanel sensitivity (X-plate resistance)
+
+ resetgpio GPIO used to reset controller
+
+ ledgpio GPIO used to control backlight
+
+
Name: i2c-bcm2708
Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus.
Load: dtoverlay=i2c-bcm2708
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts
@@ -0,0 +1,152 @@
+/*
+ * Device Tree overlay for HY28b display shield by Texy.
+ * Modified for 2017 version with ILI9325 D chip
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&spi0>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@1 {
+ target = <&spidev0>;
+ __overlay__ {
+ status = "disabled";
+ };
+ };
+
+ fragment@2 {
+ target = <&spidev1>;
+ __overlay__ {
+ status = "disabled";
+ };
+ };
+
+ fragment@3 {
+ target = <&gpio>;
+ __overlay__ {
+ hy28b_pins: hy28b_pins {
+ brcm,pins = <17 25 18>;
+ brcm,function = <0 1 1>; /* in out out */
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&spi0>;
+ __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hy28b: hy28b@0{
+ compatible = "ilitek,ili9325";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hy28b_pins>;
+
+ spi-max-frequency = <48000000>;
+ spi-cpol;
+ spi-cpha;
+ rotate = <270>;
+ bgr;
+ fps = <50>;
+ buswidth = <8>;
+ startbyte = <0x70>;
+ reset-gpios = <&gpio 25 0>;
+ led-gpios = <&gpio 18 1>;
+
+ init = <0x10000e5 0x78F0
+ 0x1000001 0x0100
+ 0x1000002 0x0700
+ 0x1000003 0x1030
+ 0x1000004 0x0000
+ 0x1000008 0x0207
+ 0x1000009 0x0000
+ 0x100000a 0x0000
+ 0x100000c 0x0000
+ 0x100000d 0x0000
+ 0x100000f 0x0000
+ 0x1000010 0x0000
+ 0x1000011 0x0007
+ 0x1000012 0x0000
+ 0x1000013 0x0000
+ 0x1000007 0x0001
+ 0x2000032
+ 0x2000032
+ 0x2000032
+ 0x2000032
+ 0x1000010 0x1090
+ 0x1000011 0x0227
+ 0x2000032
+ 0x1000012 0x001f
+ 0x2000032
+ 0x1000013 0x1500
+ 0x1000029 0x0027
+ 0x100002b 0x000d
+ 0x2000032
+ 0x1000020 0x0000
+ 0x1000021 0x0000
+ 0x2000032
+ 0x1000030 0x0000
+ 0x1000031 0x0707
+ 0x1000032 0x0307
+ 0x1000035 0x0200
+ 0x1000036 0x0008
+ 0x1000037 0x0004
+ 0x1000038 0x0000
+ 0x1000039 0x0707
+ 0x100003c 0x0002
+ 0x100003d 0x1d04
+ 0x1000050 0x0000
+ 0x1000051 0x00ef
+ 0x1000052 0x0000
+ 0x1000053 0x013f
+ 0x1000060 0xa700
+ 0x1000061 0x0001
+ 0x100006a 0x0000
+ 0x1000080 0x0000
+ 0x1000081 0x0000
+ 0x1000082 0x0000
+ 0x1000083 0x0000
+ 0x1000084 0x0000
+ 0x1000085 0x0000
+ 0x1000090 0x0010
+ 0x1000092 0x0600
+ 0x1000007 0x0133>;
+ debug = <0>;
+ };
+
+ hy28b_ts: hy28b-ts@1 {
+ compatible = "ti,ads7846";
+ reg = <1>;
+
+ spi-max-frequency = <2000000>;
+ interrupts = <17 2>; /* high-to-low edge triggered */
+ interrupt-parent = <&gpio>;
+ pendown-gpio = <&gpio 17 0>;
+ ti,x-plate-ohms = /bits/ 16 <100>;
+ ti,pressure-max = /bits/ 16 <255>;
+ };
+ };
+ };
+ __overrides__ {
+ speed = <&hy28b>,"spi-max-frequency:0";
+ rotate = <&hy28b>,"rotate:0";
+ fps = <&hy28b>,"fps:0";
+ debug = <&hy28b>,"debug:0";
+ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0";
+ resetgpio = <&hy28b>,"reset-gpios:4",
+ <&hy28b_pins>, "brcm,pins:4";
+ ledgpio = <&hy28b>,"led-gpios:4",
+ <&hy28b_pins>, "brcm,pins:8";
+ };
+};
|
