blob: 9e2adfa1315b0e0a0acca4635a4ad3fd99f100f8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sat, 12 Sep 2020 22:11:12 +0200
Subject: bcm53xx: Meraki MR32 use hw i2c
replace the i2c-gpio provided i2c functionality with the
hardware in the SoC. This can be activated once the
internal i2c works as well as the bit-banged i2c-gpio.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -85,40 +85,6 @@
max-brightness = <255>;
};
};
-
- i2c {
- /*
- * The platform provided I2C does not budge.
- * This is a replacement until I can figure
- * out what are the missing bits...
- */
-
- compatible = "i2c-gpio";
- sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- i2c-gpio,delay-us = <10>; /* close to 100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
-
- current_sense: ina219@45 {
- compatible = "ti,ina219";
- reg = <0x45>;
- shunt-resistor = <60000>; /* = 60 mOhms */
- };
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- pagesize = <32>;
- read-only;
- #address-cells = <1>;
- #size-cells = <1>;
-
- mac_address: mac-address@66 {
- reg = <0x66 0x6>;
- };
- };
- };
};
&uart0 {
@@ -229,3 +195,31 @@
};
};
};
+
+&i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_i2c>;
+
+ clock-frequency = <100000>;
+
+ current_sense: ina219@45 {
+ compatible = "ti,ina219";
+ reg = <0x45>;
+ shunt-resistor = <60000>; /* = 60 mOhms */
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
+ };
+};
|
