1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
From: Dan Haab <dhaab@luxul.com>
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1410
Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
serial flash. It has 3 LEDs and just one (reset) button.
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 +++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm47081-luxul-xap-1410.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XAP-1410 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
|
