blob: 48f829f79920e6d7d3c8c93481a3fb0e9dfbf3b5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
From fc430aea02068150d053ef24bc424db3dd1357d4 Mon Sep 17 00:00:00 2001
From: Al Cooper <alcooperx@gmail.com>
Date: Fri, 3 Jan 2020 13:18:08 -0500
Subject: [PATCH] phy: usb: PHY's MDIO registers not accessible without device
installed
When there is no device connected and FSM is enabled, the XHCI puts
the PHY into suspend mode. When the PHY is put into suspend mode
the USB LDO powers down the PHY. This causes the MDIO to be
inaccessible and its registers reset to default. The fix is to
disable FSM.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
@@ -56,6 +56,7 @@
#define USB_PHY_PLL_LDO_CTL 0x08
#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004
#define USB_PHY_UTMI_CTL_1 0x04
+#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800
#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c
#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2
#define USB_PHY_STATUS 0x20
@@ -229,6 +230,14 @@ static void usb_init_common_7211b0(struc
usb_init_common(params);
+ /*
+ * Disable FSM, otherwise the PHY will auto suspend when no
+ * device is connected and will be reset on resume.
+ */
+ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
+ reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
+
usb2_eye_fix_7211b0(params);
}
|
