1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
|
From 0e81e4689a34e3f413ef403e0d801970d324c5b2 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 2 Oct 2020 10:06:49 +0100
Subject: [PATCH] overlays: Update display GPIO declarations
The 5.4 kernel changes the way a number of display drivers use GPIOs.
That change has exposed flaws/broken a number of display overlays, so
after a trickle of single-display patches this is a best-guess attempt
to fix the remainder. As none of these changes have been tested on real
displays there is a possibility that this either doesn't fix the
problem or even breaks something that was working - apologies if that
is the case.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/overlays/goodix-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/hy28a-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/media-center-overlay.dts | 6 +++---
arch/arm/boot/dts/overlays/mz61581-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/piscreen-overlay.dts | 4 ++--
arch/arm/boot/dts/overlays/piscreen2r-overlay.dts | 4 ++--
arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts | 2 +-
arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 4 ++--
11 files changed, 16 insertions(+), 16 deletions(-)
--- a/arch/arm/boot/dts/overlays/goodix-overlay.dts
+++ b/arch/arm/boot/dts/overlays/goodix-overlay.dts
@@ -31,7 +31,7 @@
interrupt-parent = <&gpio>;
interrupts = <4 2>; // high-to-low edge triggered
irq-gpios = <&gpio 4 0>; // Pin7 on GPIO header
- reset-gpios = <&gpio 17 0>; // Pin11 on GPIO header
+ reset-gpios = <&gpio 17 1>; // Pin11 on GPIO header
};
};
};
--- a/arch/arm/boot/dts/overlays/hy28a-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts
@@ -61,7 +61,7 @@
fps = <50>;
buswidth = <8>;
startbyte = <0x70>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
led-gpios = <&gpio 18 1>;
debug = <0>;
};
--- a/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts
+++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts
@@ -61,7 +61,7 @@
fps = <50>;
buswidth = <8>;
startbyte = <0x70>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
led-gpios = <&gpio 18 1>;
init = <0x10000e5 0x78F0
--- a/arch/arm/boot/dts/overlays/media-center-overlay.dts
+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts
@@ -53,9 +53,9 @@
bgr;
fps = <30>;
buswidth = <8>;
- reset-gpios = <&gpio 23 0>;
+ reset-gpios = <&gpio 23 1>;
dc-gpios = <&gpio 24 0>;
- led-gpios = <&gpio 12 1>;
+ led-gpios = <&gpio 12 0>;
debug = <0>;
};
@@ -66,7 +66,7 @@
spi-max-frequency = <2000000>;
interrupts = <25 2>; /* high-to-low edge triggered */
interrupt-parent = <&gpio>;
- pendown-gpio = <&gpio 25 0>;
+ pendown-gpio = <&gpio 25 1>;
ti,x-plate-ohms = /bits/ 16 <60>;
ti,pressure-max = /bits/ 16 <255>;
};
--- a/arch/arm/boot/dts/overlays/mz61581-overlay.dts
+++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts
@@ -65,7 +65,7 @@
buswidth = <8>;
txbuflen = <32768>;
- reset-gpios = <&gpio 15 0>;
+ reset-gpios = <&gpio 15 1>;
dc-gpios = <&gpio 25 0>;
led-gpios = <&gpio 18 0>;
--- a/arch/arm/boot/dts/overlays/piscreen-overlay.dts
+++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts
@@ -59,9 +59,9 @@
fps = <30>;
buswidth = <8>;
regwidth = <16>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
dc-gpios = <&gpio 24 0>;
- led-gpios = <&gpio 22 1>;
+ led-gpios = <&gpio 22 0>;
debug = <0>;
init = <0x10000b0 0x00
--- a/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts
+++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts
@@ -59,9 +59,9 @@
buswidth = <8>;
regwidth = <16>;
txbuflen = <32768>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
dc-gpios = <&gpio 24 0>;
- led-gpios = <&gpio 22 1>;
+ led-gpios = <&gpio 22 0>;
debug = <0>;
init = <0x10000b0 0x00
--- a/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
@@ -59,7 +59,7 @@
rotate = <0>;
fps = <25>;
buswidth = <8>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
dc-gpios = <&gpio 24 0>;
debug = <0>;
--- a/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
@@ -59,7 +59,7 @@
rotate = <0>;
fps = <25>;
buswidth = <8>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
dc-gpios = <&gpio 24 0>;
debug = <0>;
--- a/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
@@ -59,7 +59,7 @@
rotate = <0>;
fps = <25>;
buswidth = <8>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
dc-gpios = <&gpio 24 0>;
debug = <0>;
--- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts
+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts
@@ -85,9 +85,9 @@
fps = <20>;
bgr;
buswidth = <8>;
- reset-gpios = <&gpio 25 0>;
+ reset-gpios = <&gpio 25 1>;
dc-gpios = <&gpio 24 0>;
- led-gpios = <&gpio 18 1>;
+ led-gpios = <&gpio 18 0>;
debug = <0>;
init = <0x10000B0 0x80
|
