1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
From 30fbdcf8d58658860e43c0396cb50c5d4ade2dc5 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sat, 4 Jul 2020 03:04:38 +0300
Subject: [PATCH] dt/dtoverlays: imx219: Add parameter to set camera
module rotation
Add a rotation DT overlay parameter to allow specifying the camera
module mounting rotation. Set the default rotation to 180 as the module
is typically mounted upside-down.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
arch/arm/boot/dts/overlays/README | 5 +++--
arch/arm/boot/dts/overlays/imx219-overlay.dts | 6 ++++++
2 files changed, 9 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1433,8 +1433,9 @@ Name: imx219
Info: Sony IMX219 camera module.
Uses Unicam 1, which is the standard camera connector on most Pi
variants.
-Load: dtoverlay=imx219
-Params: <None>
+Load: dtoverlay=imx219,<param>=<val>
+Params: rotation Mounting rotation of the camera sensor (0 or
+ 180, default 180)
Name: imx290
--- a/arch/arm/boot/dts/overlays/imx219-overlay.dts
+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts
@@ -27,6 +27,8 @@
VDIG-supply = <&imx219_vdig>; /* 1.8v */
VDDL-supply = <&imx219_vddl>; /* 1.2v */
+ rotation = <180>;
+
port {
imx219_0: endpoint {
remote-endpoint = <&csi1_ep>;
@@ -110,4 +112,8 @@
cam0-pwdn = <&imx219_vana>,"gpio:4";
};
};
+
+ __overrides__ {
+ rotation = <&imx219>,"rotation:0";
+ };
};
|
