1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
From bd291f0ff613ad270a7c9352f3f27a09c058553f Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Tue, 21 Apr 2020 17:34:27 +0100
Subject: [PATCH] ARM: dts: Create bcm2708-rpi-b-rev1.dts
The first revision of the Pi Model B used I2C0 to address the camera
and I2C0 was available for user applications on the 26-pin header.
The second revision switched the roles, kept I2C0 on the 26-pin header
and added I2C1 on a new 8-way header (P5).
Up to now, downstream DTS has used a single file for both revisions of
the board, with a small amount of patching from the firmware. With the
introduction of an I2C mux to share I2C0 between the camera/display
connectors and the IDC headers, the difference between the two versions
becomes too great to comfortably manage with tweaking, hence this split.
Upstream DTS files already have bcm2835-rpi-b.dts and
bcm2835-rpi-b-rev2.dts, but for backwards compatibility the new file is
being added as bcm2708-rpi-b-rev1.dts, rather than renaming the old
shared version to bcm2708-rpi-b-rev2.dts.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts | 127 +++++++++++++++++++++++
arch/arm/boot/dts/bcm270x-rpi.dtsi | 4 +
3 files changed, 132 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -2,6 +2,7 @@
dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2708-rpi-b.dtb \
+ bcm2708-rpi-b-rev1.dtb \
bcm2708-rpi-b-plus.dtb \
bcm2708-rpi-cm.dtb \
bcm2708-rpi-zero.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+#include "bcm2708.dtsi"
+#include "bcm2708-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-b", "brcm,bcm2835";
+ model = "Raspberry Pi Model B";
+};
+
+&gpio {
+ spi0_pins: spi0_pins {
+ brcm,pins = <9 10 11>;
+ brcm,function = <4>; /* alt0 */
+ };
+
+ spi0_cs_pins: spi0_cs_pins {
+ brcm,pins = <8 7>;
+ brcm,function = <1>; /* output */
+ };
+
+ i2c0_pins: i2c0 {
+ brcm,pins = <0 1>;
+ brcm,function = <4>;
+ };
+
+ i2c1_pins: i2c1 {
+ brcm,pins = <2 3>;
+ brcm,function = <4>;
+ };
+
+ i2s_pins: i2s {
+ brcm,pins = <28 29 30 31>;
+ brcm,function = <6>; /* alt2 */
+ };
+
+ audio_pins: audio_pins {
+ brcm,pins = <40 45>;
+ brcm,function = <4>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+ spidev0: spidev@0{
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ };
+
+ spidev1: spidev@1{
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <125000000>;
+ };
+};
+
+/delete-node/ &i2c0mux;
+
+i2c0: &i2c0if {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+i2c_csi_dsi: &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+};
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ };
+
+ __overrides__ {
+ i2c0 = <&i2c0>, "status";
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
+&i2s {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+ act_led: act {
+ label = "led0";
+ linux,default-trigger = "mmc0";
+ gpios = <&gpio 16 1>;
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
+
+&audio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+ __overrides__ {
+ act_led_gpio = <&act_led>,"gpios:4";
+ act_led_activelow = <&act_led>,"gpios:8";
+ act_led_trigger = <&act_led>,"linux,default-trigger";
+ };
+};
--- a/arch/arm/boot/dts/bcm270x-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm270x-rpi.dtsi
@@ -110,6 +110,10 @@
status = "disabled";
};
+&i2c0mux {
+ status = "disabled";
+};
+
&i2c1 {
status = "disabled";
};
|
