1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
From 8387866a1d91c78d9aa75052821b1dafa25fff0f Mon Sep 17 00:00:00 2001
From: Alex Crawford <raspberrypi/linux@code.acrawford.com>
Date: Fri, 28 Jan 2022 13:36:51 -0800
Subject: [PATCH] i2c: bcm2835: Make clock-stretch timeout configurable
The default clock-stretch timeout is 35 mS, which works well for
SMBus, but there are some I2C devices which can stretch the clock even
longer. Rather than trying to prescribe a safe default for everyone,
allow the timeout to be configured.
Signed-off-by: Alex Crawford <raspberrypi/linux@code.acrawford.com>
---
drivers/i2c/busses/i2c-bcm2835.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -60,6 +60,10 @@ static unsigned int debug;
module_param(debug, uint, 0644);
MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer");
+static unsigned int clk_tout_ms = 35; /* SMBUs-recommended 35ms */
+module_param(clk_tout_ms, uint, 0644);
+MODULE_PARM_DESC(clk_tout_ms, "clock-stretch timeout (mS)");
+
#define BCM2835_DEBUG_MAX 512
struct bcm2835_debug {
struct i2c_msg *msg;
@@ -219,12 +223,12 @@ static int clk_bcm2835_i2c_set_rate(stru
(redl << BCM2835_I2C_REDL_SHIFT));
/*
- * Set the clock stretch timeout to the SMBUs-recommended 35ms.
+ * Set the clock stretch timeout.
*/
- if (rate > 0xffff*1000/35)
+ if (rate > 0xffff*1000/clk_tout_ms)
clk_tout = 0xffff;
else
- clk_tout = 35*rate/1000;
+ clk_tout = clk_tout_ms*rate/1000;
bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_CLKT, clk_tout);
|
