1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
|
From 2f1c8eedc108d458fb2566ec582cbd7c45fc280b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 12 Jan 2022 12:48:53 +0000
Subject: [PATCH] overlays: Add vl805 overlay
With the automatic VL805 support being removed from the standard
CM4 dtb (since most CM4 carriers don't have a VL805), retain support
on those that do by creating a "vl805" overlay that restores the
deleted "usb@0,0" node.
The "vl805" overlay will be loaded automatically (after an upcoming
firmware update) on CM4 boards where the EEPROM config includes the
setting VL805=1.
See: https://forums.raspberrypi.com/viewtopic.php?t=326088
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 8 ++++++++
arch/arm/boot/dts/overlays/vl805-overlay.dts | 18 ++++++++++++++++++
3 files changed, 27 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/vl805-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -243,6 +243,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
vc4-kms-v3d-pi4.dtbo \
vc4-kms-vga666.dtbo \
vga666.dtbo \
+ vl805.dtbo \
w1-gpio.dtbo \
w1-gpio-pullup.dtbo \
w5500.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -3744,6 +3744,14 @@ Load: dtoverlay=vga666
Params: <None>
+Name: vl805
+Info: Overlay to enable a VIA VL805 USB3 controller on CM4 carriers
+ Will be loaded automatically by up-to-date firmware if "VL805=1" is
+ set in the EEPROM config.
+Load: dtoverlay=vl805
+Params: <None>
+
+
Name: w1-gpio
Info: Configures the w1-gpio Onewire interface module.
Use this overlay if you *don't* need a GPIO to drive an external pullup.
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vl805-overlay.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+ compatible = "brcm,bcm2711";
+
+ fragment@0 {
+ target-path = "pcie0/pci@0,0";
+ __overlay__ {
+ usb@0,0 {
+ reg = <0 0 0 0 0>;
+ resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+ };
+ };
+ };
+};
|
